Step 1: Review Your Packages

Step 2: Choose Your Integration Method

Step 3: Copy Your Script or Download Config

Option 1: Copy Script

Option 2: Download Config

Step 4: Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the packages and push them to a repository
  Download Packages

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the packages:
  Download Packages
- Follow manual internalization instructions
Package Internalizer (C4B)
- Run: (additional options)
- For package and dependencies run:
- Automate package internalization

Step 5: Copy Your Script

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###

#### We initialize a few things that are needed by this script - there are no other requirements.
$ErrorActionPreference = "Stop"

#### Set TLS 1.2 (3072) as that is the minimum required by various up-to-date repositories.
#### Use integers because the enumeration value for TLS 1.2 won't exist
#### in .NET 4.0, even though they are addressable if .NET 4.5+ is
#### installed (.NET 4.5 is an in-place upgrade).
[System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072

#### We use this variable for future REST calls.
$RequestArguments = @{
    UseBasicParsing = $true
}

## 2. TOP LEVEL VARIABLES ##

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# $NugetRepositoryCredential = [PSCredential]::new(
#     "username",
#     ("password" | ConvertTo-SecureString -AsPlainText -Force)
# )
# $RequestArguments.Credential = $NugetRepositoryCredential

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it
$ChocolateyDownloadUrl = "$($NugetRepositoryUrl.TrimEnd('/'))/package/chocolatey.2.5.0.nupkg"

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# $ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

#### Download the Nupkg, appending .zip to the filename to handle archive cmdlet limitations
if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    $TempDirectory = Join-Path $env:Temp "chocolateyInstall"
    if (-not (Test-Path $TempDirectory -PathType Container)) {
        $null = New-Item -Path $TempDirectory -ItemType Directory
    }
    $DownloadedNupkg = Join-Path $TempDirectory "$(Split-Path $ChocolateyDownloadUrl -Leaf).zip"
    Invoke-WebRequest -Uri $ChocolateyDownloadUrl -OutFile $DownloadedNupkg @RequestArguments

    #### Extract the Nupkg, and run the chocolateyInstall script
    if (Get-Command Microsoft.PowerShell.Archive\Expand-Archive -ErrorAction SilentlyContinue) {
        Microsoft.PowerShell.Archive\Expand-Archive -Path $DownloadedNupkg -DestinationPath $TempDirectory -Force
    } else {
        # PowerShell versions <4.0 do not have this function available
        try {
            $shellApplication = New-Object -ComObject Shell.Application
            $zipPackage = $shellApplication.NameSpace($DownloadedNupkg)
            $destinationFolder = $shellApplication.NameSpace($TempDirectory)
            $destinationFolder.CopyHere($zipPackage.Items(), 0x10)
        } catch {
            Write-Warning "Unable to unzip package using built-in compression."
            throw $_
        }
    }

    & $(Join-Path $TempDirectory "tools\chocolateyInstall.ps1")
}

if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    refreshenv
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# choco feature enable -n useFipsCompliantChecksums

### b. Apply Recommended Configuration ###
#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
choco config set --name cacheLocation --value C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
choco config set --name commandExecutionTimeoutSeconds --value 14400

#### Turn off download progress when running choco through integrations
choco feature disable --name showDownloadProgress

### c. Sources ###
#### Remove the default community package repository source
choco source list --limitoutput | ConvertFrom-Csv -Header 'Name', 'Location' -Delimiter '|' | ForEach-Object {
    if ($_.Location -eq 'https://community.chocolatey.org/api/v2/') {
        choco source remove -n $_.Name
    }
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
if ($NugetRepositoryCredential) {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --user $NugetRepositoryCredential.UserName --password $NugetRepositoryCredential.GetNetworkCredential().Password --priority 1
} else {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --priority 1
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
choco upgrade chocolatey --confirm

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
choco install chocolatey-license --source $NugetRepositoryUrl --confirm

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco source disable --name chocolatey.licensed
} else {
    Write-Warning "Not disabling 'chocolatey.licensed' feed, as Chocolatey-License has not been installed."
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco install chocolatey.extension --source $NugetRepositoryUrl --confirm
} else {
    Write-Warning "Not installing 'chocolatey.extension', as Chocolatey-License has not been installed."
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
choco feature disable --name showNonElevatedWarnings
choco feature enable --name useBackgroundService
choco feature enable --name useBackgroundServiceWithNonAdministratorsOnly
choco feature enable --name allowBackgroundServiceUninstallsFromUserInstallsOnly
choco config set --name allowedBackgroundServiceCommands --value "install,upgrade,uninstall"

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if ($ChocolateyCentralManagementUrl) {
    choco install chocolatey-agent --source $NugetRepositoryUrl --confirm
    choco config set --name CentralManagementServiceUrl --value $ChocolateyCentralManagementUrl
    if ($ChocolateyCentralManagementClientSalt) {
        choco config set --name centralManagementClientCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementClientSalt
    }
    if ($ChocolateyCentralManagementServiceSalt) {
        choco config set --name centralManagementServiceCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementServiceSalt
    }
    choco feature enable --name useChocolateyCentralManagement
    choco feature enable --name useChocolateyCentralManagementDeployments
}

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. chocolatey.chocolatey
##### You will require the chocolatey.chocolatey collection to be installed
##### on all machines using this playbook.
##### Please see https://github.com/chocolatey/chocolatey-ansible/#installing-the-collection-from-ansible-galaxy

- name: Install and Configure Chocolatey
  hosts: all

## 2. TOP LEVEL VARIABLES ##
  vars:

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
    nuget_repository_url: INTERNAL REPO URL

### b. Internal Repository Credential ###
#### If required, add the repository access credential here and
#### uncomment lines with source_username and source_password below
#    nuget_repository_username: username
#    nuget_repository_password: password

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#    chocolatey_central_management_url: https://chocolatey-central-management:24020/ChocolateyManagementService

#### ii. If using a Client Salt, add it here
#    chocolatey_central_management_client_salt: clientsalt

#### iii. If using a Service Salt, add it here
#    chocolatey_central_management_service_salt: servicesalt

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

  tasks:
  - name: Install chocolatey
    win_chocolatey:
      name: chocolatey
      source: ""{{ nuget_repository_url }}""
      # source_username: ""{{ nuget_repository_username }}""
      # source_password: ""{{ nuget_repository_password }}""

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#   - name: Enable FIPS compliance
#     win_chocolatey_feature:
#       name: useFipsCompliantChecksums
#       state: enabled

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
  - name: Set the cache location
    win_chocolatey_config:
      name: cacheLocation
      state: present
      value: C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
  - name: Set the command execution timeout
    win_chocolatey_config:
      name: commandExecutionTimeoutSeconds
      state: present
      value: 14400

#### Turn off download progress when running choco through integrations
  - name: Disable showing download progress
    win_chocolatey_feature:
      name: showDownloadProgress
      state: disabled

### c. Sources ###
#### Remove the default community package repository source
  - name: Remove Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey
      state: absent

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here
#### NOTE: This EXAMPLE may require changes
  - name: Add Internal Repository
    win_chocolatey_source:
      name: ChocolateyInternal
      state: present
      source: {{ nuget_repository_url }}
      # source_username: {{ nuget_repository_username }}
      # source_password: {{ nuget_repository_password }}
      priority: 1

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
  - name: Upgrade Chocolatey
    win_chocolatey:
      name: chocolatey
      state: latest

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.
### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
  - name: Install Chocolatey License
    win_chocolatey:
      name: chocolatey-license
      source: ChocolateyInternal
      state: latest

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
  - name: Disable Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey.licensed
      state: disabled

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
  - name: Install Chocolatey Extension
    win_chocolatey:
      name: chocolatey.extension
      source: ChocolateyInternal
      state: latest

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
  - name: Hide not-elevated warnings
    win_chocolatey_feature:
      name: showNonElevatedWarnings
      state: disabled

  - name: Use background mode for self-service
    win_chocolatey_feature:
      name: useBackgroundService
      state: enabled

  - name: Use background service for non-admins
    win_chocolatey_feature:
      name: useBackgroundServiceWithNonAdministratorsOnly
      state: enabled

  - name: Allow background uninstallation for user installs
    win_chocolatey_feature:
      name: allowBackgroundServiceUninstallsFromUserInstallsOnly
      state: enabled

  - name: Set allowed background service commands
    win_chocolatey_config:
      name: backgroundServiceAllowedCommands
      state: present
      value: install,upgrade,uninstall

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
  - name: Install Chocolatey Agent
    when: chocolatey_central_management_url is defined
    win_chocolatey:
      name: chocolatey-agent
      source: ChocolateyInternal
      state: latest

  - name: Set the Central Management Service URL
    when: chocolatey_central_management_url is defined
    win_chocolatey_config:
      name: CentralManagementServiceUrl
      state: present
      value: {{ chocolatey_central_management_url }}

  - name: Set the Central Management Client Salt
    when: chocolatey_central_management_client_salt is defined
    win_chocolatey_config:
      name: centralManagementClientCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_client_salt }}

  - name: Set the Central Management Service Salt
    when: chocolatey_central_management_service_salt is defined
    win_chocolatey_config:
      name: centralManagementServiceCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_service_salt }}

  - name: Use Central Management
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagement
      state: enabled

  - name: Use Central Management Deployments
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagementDeployments
      state: enabled

See docs at https://docs.chef.io/resource_chocolatey_package.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### The Chocolatey resources are available with any recent version of Chef.
#### We utilise the Chocolatey recipe to install the Chocolatey binaries.
include_recipe "chocolatey"

## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# NugetRepositoryUsername = "username"
# NugetRepositoryPassword = "password"

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
ChocolateyNupkgUrl = "INTERNAL REPO URL/package/chocolatey.2.5.0.nupkg",

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
node['chocolatey']['install vars'] = {
  'chocolateyDownloadUrl' => "#{ChocolateyNupkgUrl}",
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# chocolatey_feature 'useFipsCompliantChecksums' do
#   action :enable
# end

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolatey_config 'cacheLocation' do
  value 'C:\ProgramData\chocolatey\cache'
end

#### Increase timeout to at least 4 hours
chocolatey_config 'commandExecutionTimeoutSeconds' do
  value '14400'
end

#### Turn off download progress when running choco through integrations
chocolatey_feature 'showDownloadProgress' do
  action :disable
end

### c. Sources ###
#### Remove the default community package repository source
chocolatey_source 'chocolatey' do
  action :remove
end

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
chocolatey_source 'ChocolateyInternal' do
  source "#{NugetRepositoryUrl}"
  priority 1
  action   :add
end

execute 'ChocolateyInternal' do
  command "choco source add --name ChocolateyInternal -s #{NugetRepositoryUrl} -u=#{NugetRepositoryUsername} -p=#{NugetRepositoryPassword} --priority=1"
  only_if { NugetRepositoryUsername != nil || NugetRepositoryPassword != nil }
end

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
chocolatey_package 'chocolatey' do
  action :upgrade
  source "#{NugetRepositoryUrl}"
end

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
chocolatey_package 'chocolatey-license' do
  action :install
  source "#{NugetRepositoryUrl}"
end

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
chocolatey_source 'chocolatey.licensed' do
  action            :disable
end

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
chocolatey_package 'chocolatey.extention' do
  action     install
  source     "#{NugetRepositoryUrl}"
end

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolatey_feature 'showNonElevatedWarnings' do
  action :disable
end

chocolatey_feature 'useBackgroundService' do
  action :enable
end

chocolatey_feature 'useBackgroundServiceWithNonAdministratorsOnly' do
  action :enable
end

chocolatey_feature 'allowBackgroundServiceUninstallsFromUserInstallsOnly' do
  action :enable
end

chocolatey_config 'backgroundServiceAllowedCommands' do
  value 'install,upgrade,uninstall'
end

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
chocolatey_package 'chocolatey-agent' do
  action     install
  source     "#{NugetRepositoryUrl}"
  # user       "#{NugetRepositoryUsername}"
  # password   "#{NugetRepositoryPassword}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'CentralManagementServiceUrl' do
  value  "#{ChocolateyCentralManagementUrl}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'centralManagementClientCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementClientSalt}"
  only_if { ChocolateyCentralManagementClientSalt != nil }
end

chocolatey_config 'centralManagementServiceCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementServiceSalt}"
  only_if { ChocolateyCentralManagementServiceSalt != nil }
end

chocolatey_feature 'useChocolateyCentralManagement' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_feature 'useChocolateyCentralManagementDeployments' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.

If Applicable - Chocolatey Configuration/Installation


#requires -Modules cChoco
## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires chocolatey\cChoco DSC module to be installed on the machine compiling the DSC manifest
#### NOTE: This will need to be installed before running the DSC portion of this script
if (-not (Get-Module cChoco -ListAvailable)) {
    $null = Install-PackageProvider -Name NuGet -MinimumVersion 2.8.5.201 -Force
    if (($PSGallery = Get-PSRepository -Name PSGallery).InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy Trusted
    }
    Install-Module -Name cChoco
    if ($PSGallery.InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy $PSGallery.InstallationPolicy
    }
}

#### ii. Requires a hosted copy of the install.ps1 script
##### This should be available to download without authentication.
##### The original script can be found here: https://community.chocolatey.org/install.ps1

Configuration ChocolateyConfig {
## 2. TOP LEVEL VARIABLES ##
    param(
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
        $NugetRepositoryUrl      = "INTERNAL REPO URL",

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
        $ChocolateyNupkgUrl      = "INTERNAL REPO URL/package/chocolatey.2.5.0.nupkg",

### c. Internal Repository Credential ###
#### If required, add the repository access credential here
#        $NugetRepositoryCredential = [PSCredential]::new(
#            "username",
#            ("password" | ConvertTo-SecureString -AsPlainText -Force)
#        ),

### d. Install.ps1 URL
#### The path to the hosted install script:
        $ChocolateyInstallPs1Url = "https://community.chocolatey.org/install.ps1"

### e. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#        $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService",

#### ii. If using a Client Salt, add it here
#        $ChocolateyCentralManagementClientSalt = "clientsalt",

#### iii. If using a Service Salt, add it here
#        $ChocolateyCentralManagementServiceSalt = "servicesalt"
    )
    Import-DscResource -ModuleName PSDesiredStateConfiguration
    Import-DscResource -ModuleName cChoco

    Node 'localhost' {
## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
        Environment chocoDownloadUrl {
            Name  = "chocolateyDownloadUrl"
            Value = $ChocolateyNupkgUrl
        }

        cChocoInstaller installChocolatey {
            DependsOn = "[Environment]chocoDownloadUrl"
            InstallDir = Join-Path $env:ProgramData "chocolatey"
            ChocoInstallScriptUrl = $ChocolateyInstallPs1Url
        }

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#        cChocoFeature featureFipsCompliance {
#            FeatureName = "useFipsCompliantChecksums"
#        }

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
        cChocoConfig cacheLocation {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "cacheLocation"
            Value      = "C:\ProgramData\chocolatey\cache"
        }

#### Increase timeout to at least 4 hours
        cChocoConfig commandExecutionTimeoutSeconds {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "commandExecutionTimeoutSeconds"
            Value      = 14400
        }

#### Turn off download progress when running choco through integrations
        cChocoFeature showDownloadProgress {
            DependsOn   = "[cChocoInstaller]installChocolatey"
            FeatureName = "showDownloadProgress"
            Ensure      = "Absent"
        }

### c. Sources ###
#### Remove the default community package repository source
        cChocoSource removeCommunityRepository {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name       = "chocolatey"
            Ensure     = "Absent"
        }

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here.
#### NOTE: This EXAMPLE may require changes
        cChocoSource addInternalSource {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name        = "ChocolateyInternal"
            Source      = $NugetRepositoryUrl
            Credentials = $NugetRepositoryCredential
            Priority    = 1
        }

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
        cChocoPackageInstaller updateChocolatey {
            DependsOn   = "[cChocoSource]addInternalSource", "[cChocoSource]removeCommunityRepository"
            Name        = "chocolatey"
            AutoUpgrade = $true
        }

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
        cChocoPackageInstaller chocolateyLicense {
            DependsOn = "[cChocoPackageInstaller]updateChocolatey"
            Name      = "chocolatey-license"
        }

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
        Script disableLicensedSource {
            DependsOn  = "[cChocoPackageInstaller]chocolateyLicense"
            GetScript  = {
                $Source = choco source list --limitoutput | `
                    ConvertFrom-Csv -Delimiter '|' -Header Name, Source, Disabled | `
                    Where-Object Name -eq "chocolatey.licensed"

                return @{
                    Result = if ($Source) {
                        [bool]::Parse($Source.Disabled)
                    } else {
                        Write-Warning "Source 'chocolatey.licensed' was not present."
                        $true  # Source does not need disabling
                    }
                }
            }
            SetScript  = {
                $null = choco source disable --name "chocolatey.licensed"
            }
            TestScript = {
                $State = [ScriptBlock]::Create($GetScript).Invoke()
                return $State.Result
            }
        }

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
        cChocoPackageInstaller chocolateyLicensedExtension {
            DependsOn = "[Script]disableLicensedSource"
            Name      = "chocolatey.extension"
        }

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
        cChocoFeature hideElevatedWarnings {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "showNonElevatedWarnings"
            Ensure      = "Absent"
        }

        cChocoFeature useBackgroundService {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundService"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceWithNonAdmins {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundServiceWithNonAdministratorsOnly"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceUninstallsForUserInstalls {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "allowBackgroundServiceUninstallsFromUserInstallsOnly"
            Ensure      = "Present"
        }

        cChocoConfig allowedBackgroundServiceCommands {
            DependsOn   = "[cChocoFeature]useBackgroundService"
            ConfigName = "backgroundServiceAllowedCommands"
            Value       = "install,upgrade,uninstall"
        }

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
        if ($ChocolateyCentralManagementUrl) {
            cChocoPackageInstaller chocolateyAgent {
                DependsOn = "[cChocoPackageInstaller]chocolateyLicensedExtension"
                Name      = "chocolatey-agent"
            }

            cChocoConfig centralManagementServiceUrl {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                ConfigName = "CentralManagementServiceUrl"
                Value       = $ChocolateyCentralManagementUrl
            }

            if ($ChocolateyCentralManagementClientSalt) {
                cChocoConfig centralManagementClientSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementClientCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementClientSalt
                }
            }

            if ($ChocolateyCentralManagementServiceSalt) {
                cChocoConfig centralManagementServiceSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementServiceCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementServiceSalt
                }
            }

            cChocoFeature useCentralManagement {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagement"
                Ensure      = "Present"
            }

            cChocoFeature useCentralManagementDeployments {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagementDeployments"
                Ensure      = "Present"
            }
        }
    }
}

# If working this into an existing configuration with a good method for
$ConfigData = @{
    AllNodes = @(
        @{
            NodeName                    = "localhost"
            PSDscAllowPlainTextPassword = $true
        }
    )
}

try {
    Push-Location $env:Temp
    $Config = ChocolateyConfig -ConfigurationData $ConfigData
    Start-DscConfiguration -Path $Config.PSParentPath -Wait -Verbose -Force
} finally {
    Pop-Location
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires puppetlabs/chocolatey module
####  See https://forge.puppet.com/puppetlabs/chocolatey


## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$_repository_url = 'INTERNAL REPO URL'

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
$_choco_download_url = 'INTERNAL REPO URL/package/chocolatey.2.5.0.nupkg'

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $_chocolatey_central_management_url = 'https://chocolatey-central-management:24020/ChocolateyManagementService'

#### ii. If using a Client Salt, add it here
# $_chocolatey_central_management_client_salt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $_chocolatey_central_management_service_salt = 'servicesalt'


## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
### Note: `chocolatey_download_url is completely different than normal
###  source locations. This is directly to the bare download url for the
###  chocolatey.nupkg, similar to what you see when you browse to
###  https://community.chocolatey.org/api/v2/package/chocolatey
class {'chocolatey':
  chocolatey_download_url => $_choco_download_url,
  use_7zip                => false,
}


## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations

#chocolateyfeature {'useFipsCompliantChecksums':
#  ensure => enabled,
#}

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolateyconfig {'cacheLocation':
  value => 'C:\ProgramData\chocolatey\cache',
}

#### Increase timeout to at least 4 hours
chocolateyconfig {'commandExecutionTimeoutSeconds':
  value => '14400',
}

#### Turn off download progress when running choco through integrations
chocolateyfeature {'showDownloadProgress':
  ensure => disabled,
}

### c. Sources ###
#### Remove the default community package repository source
chocolateysource {'chocolatey':
  ensure   => absent,
  location => 'https://community.chocolatey.org/api/v2/',
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE requires changes
chocolateysource {'internal_chocolatey':
  ensure             => present,
  location           => $_repository_url,
  priority           => 1,
  username           => 'optional',
  password           => 'optional,not ensured',
  bypass_proxy       => true,
  admin_only         => false,
  allow_self_service => false,
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/

package {'chocolatey':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}


## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/guides/organizations/organizational-deployment-guide#exercise-4-create-a-package-for-the-license

# TODO: Add resource for installing/ensuring the chocolatey-license package
package {'chocolatey-license':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
## Disabled sources still need all other attributes until
## https://tickets.puppetlabs.com/browse/MODULES-4449 is resolved.
## Password is necessary with user, but not ensurable, so it should not
## matter what it is set to here. If you ever do get into trouble here,
## the password is your license GUID.
chocolateysource {'chocolatey.licensed':
  ensure   => disabled,
  priority => '10',
  user     => 'customer',
  password => '1234',
  require  => Package['chocolatey-license'],
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
package {'chocolatey.extension':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
  require  => Package['chocolatey-license'],
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolateyfeature {'showNonElevatedWarnings':
  ensure => disabled,
}

chocolateyfeature {'useBackgroundService':
  ensure => enabled,
}

chocolateyfeature {'useBackgroundServiceWithNonAdministratorsOnly':
  ensure => enabled,
}

chocolateyfeature {'allowBackgroundServiceUninstallsFromUserInstallsOnly':
  ensure => enabled,
}

chocolateyconfig {'backgroundServiceAllowedCommands':
  value => 'install,upgrade,uninstall',
}

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if $_chocolatey_central_management_url {
  package {'chocolatey-agent':
    ensure   => latest,
    provider => chocolatey,
    source   => $_repository_url,
    require  => Package['chocolatey-license'],
  }

  chocolateyconfig {'CentralManagementServiceUrl':
    value   => $_chocolatey_central_management_url,
  }

  if $_chocolatey_central_management_client_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  if $_chocolatey_central_management_service_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  chocolateyfeature {'useChocolateyCentralManagement':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }

  chocolateyfeature {'useChocolateyCentralManagementDeployments':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }
}

Need Help? View our docs or file an issue.

There is already a version of this package in your Script Builder

Current Version	New Version

Downloads:

122,037

Downloads of v 2.9.6:

2,224

Last Update:

17 Apr 2021

Package Maintainer(s):

winks

Software Author(s):

Phil Hagelberg
Alex Osborne
Dan Larkin
and contributors

Tags:

Leiningen - Clojure Project Automation

This is not the latest version of Leiningen - Clojure Project Automation available.

2.9.6 | Updated: 17 Apr 2021

Downloads:

122,037

Downloads of v 2.9.6:

2,224

Maintainer(s):

winks

Software Author(s):

Phil Hagelberg
Alex Osborne
Dan Larkin
and contributors

Tags:

java clojure lein leiningen repl clojars package manager

Leiningen - Clojure Project Automation 2.9.6

This is not the latest version of Leiningen - Clojure Project Automation available.

Legal Disclaimer: Neither this package nor Chocolatey Software, Inc. are affiliated with or endorsed by Phil Hagelberg, Alex Osborne, Dan Larkin, and contributors. The inclusion of Phil Hagelberg, Alex Osborne, Dan Larkin, and contributors trademark(s), if any, upon this webpage is solely to identify Phil Hagelberg, Alex Osborne, Dan Larkin, and contributors goods or services and not for commercial purposes.

All Checks are Passing

3 Passing Tests

Show Checks

Validation Testing Passed

Verification Testing Passed

Details

Scan Testing Successful:

No detections found in any package files

Details

Learn More

Deployment Method: Individual Install, Upgrade, & Uninstall

To install Leiningen - Clojure Project Automation, run the following command from the command line or from PowerShell:

To upgrade Leiningen - Clojure Project Automation, run the following command from the command line or from PowerShell:

To uninstall Leiningen - Clojure Project Automation, run the following command from the command line or from PowerShell:

NOTE

This applies to both open source and commercial editions of Chocolatey.

1. Enter Your Internal Repository Url

(this should look similar to https://community.chocolatey.org/api/v2/)

2. Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the package and push it to a repository Download

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the package:
  Download
- Follow manual internalization instructions

Package Internalizer (C4B)

Run: (additional options)

choco download lein --internalize --version=2.9.6 --source=https://community.chocolatey.org/api/v2/

For package and dependencies run:

choco push --source="'INTERNAL REPO URL'"

Automate package internalization

3. Copy Your Script

choco upgrade lein -y --source="'INTERNAL REPO URL'" --version="'2.9.6'" [other options]

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:


choco upgrade lein -y --source="'INTERNAL REPO URL'" --version="'2.9.6'" 
$exitCode = $LASTEXITCODE

Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
  Exit 0
}

Exit $exitCode


- name: Install lein
  win_chocolatey:
    name: lein
    version: '2.9.6'
    source: INTERNAL REPO URL
    state: present

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.


chocolatey_package 'lein' do
  action    :install
  source   'INTERNAL REPO URL'
  version  '2.9.6'
end

See docs at https://docs.chef.io/resource_chocolatey_package.html.


cChocoPackageInstaller lein
{
    Name     = "lein"
    Version  = "2.9.6"
    Source   = "INTERNAL REPO URL"
}

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.


package { 'lein':
  ensure   => '2.9.6',
  provider => 'chocolatey',
  source   => 'INTERNAL REPO URL',
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

4. If applicable - Chocolatey configuration/installation

See infrastructure management matrix for Chocolatey configuration elements and examples.

Package Approved

This package was approved as a trusted package on 17 Apr 2021.

Description

Leiningen is for automating Clojure projects without setting your hair on fire.

It offers various project-related tasks and can:

create new projects
fetch dependencies for your project
run tests
run a fully-configured REPL
compile Java sources (if any)
run the project (if the project isn't a library)
generate a maven-style "pom" file for the project for interop
compile and package projects for deployment
publish libraries to repositories such as Clojars
run custom automation tasks written in Clojure (leiningen plug-ins)

If you come from the Java world, Leiningen could be thought of as "Maven meets Ant without the pain". For Ruby and Python folks, Leiningen combines RubyGems/Bundler/Rake and pip/Fabric in a single tool.

Files

tools\chocolateyInstall.ps1

$package = 'Leiningen'
$version = '2.9.6'
$checksumType = "sha256"
$checksum = "41c543f73eec4327dc20e60d5d820fc2a9dc772bc671610b9c385d9c4f5970b8"
$url = "https://github.com/technomancy/leiningen/releases/download/${version}/leiningen-${version}-standalone.zip"

$toolsDir = "$(Split-Path -parent $MyInvocation.MyCommand.Definition)"
$batDir = Join-Path $Env:ChocolateyInstall 'bin'
$lein = Join-Path $batDir 'lein.bat'

Write-Host "Copying lein.bat to ${lein}"
Copy-Item ${toolsDir}/lein.bat -Destination $lein

$localTempPath = "${toolsDir}\leiningen-${version}-standalone.jar"
$installPath = Join-Path $Env:USERPROFILE '.lein'
$installPath = Join-Path $installPath 'self-installs'
New-Item -Path $installPath -Type Directory
$installPath = Join-Path $installPath "leiningen-${version}-standalone.jar"

Get-ChocolateyWebFile -PackageName 'lein' `
    -FileFullPath $localTempPath -Url $url `
    -CheckSumType $checksumType -CheckSum $checksum

Move-Item $localTempPath -Destination $installPath

Write-Host "Executing ${package} bootstrap script from ${batDir}"
# $batDir is already in PATH
lein
lein version

tools\chocolateyUninstall.ps1

$package = 'Leiningen'
$version = '2.9.6'

$installDir = Join-Path $Env:USERPROFILE '.lein'
if (Test-Path $installDir)
{
  Remove-Item $installDir -Recurse -ErrorAction SilentlyContinue
}

$batDir = Join-Path $Env:ChocolateyInstall 'bin'
$lein = Join-Path $batDir 'lein.bat'
if (Test-Path $lein)
{
  Remove-Item $lein -ErrorAction SilentlyContinue
}
Write-Host "Uninstalling $package $version complete."

tools\lein.bat

@echo off

setLocal EnableExtensions EnableDelayedExpansion

set LEIN_VERSION=2.9.6

if "%LEIN_VERSION:~-9%" == "-SNAPSHOT" (
    set SNAPSHOT=YES
) else (
    set SNAPSHOT=NO
)

set ORIGINAL_PWD=%CD%
:: If ORIGINAL_PWD ends with a backslash (such as C:\),
:: we need to escape it with a second backslash.
if "%ORIGINAL_PWD:~-1%x" == "\x" set "ORIGINAL_PWD=%ORIGINAL_PWD%\"

call :FIND_DIR_CONTAINING_UPWARDS project.clj
if "%DIR_CONTAINING%" neq "" cd "%DIR_CONTAINING%"

:: LEIN_JAR and LEIN_HOME variables can be set manually.
:: Only set LEIN_JAR manually if you know what you are doing.
:: Having LEIN_JAR pointing to one version of Leiningen as well as
:: having a different version in PATH has been known to cause problems.

if "x%LEIN_HOME%" == "x" (
    set LEIN_HOME=!USERPROFILE!\.lein
)
SET RC=1

if "x%LEIN_JAR%" == "x" set "LEIN_JAR=!LEIN_HOME!\self-installs\leiningen-!LEIN_VERSION!-standalone.jar"

if "%1" == "self-install" goto SELF_INSTALL
if "%1" == "upgrade"      goto UPGRADE
if "%1" == "downgrade"    goto UPGRADE

if not exist "%~dp0..\src\leiningen\version.clj" goto RUN_NO_CHECKOUT

    :: Running from source checkout.
    call :SET_LEIN_ROOT "%~dp0.."


	set "bootstrapfile=!LEIN_ROOT!\leiningen-core\.lein-bootstrap"
	rem in .lein-bootstrap there is only one line where each path is concatenated to each other via a semicolon, there's no semicolon at the end
	rem each path is NOT inside double quotes and may contain spaces (even semicolons but this is not supported here) in their names, 
	rem  but they won't/cannot contain double quotes " or colons :  in their names (at least on windows it's not allowed/won't work)
	
	rem tested when folders contain spaces and when LEIN_ROOT contains semicolon
	
	
	if not "x%DEBUG%" == "x" echo LEIN_ROOT=!LEIN_ROOT!
	
	rem if not "%LEIN_ROOT:;=%" == "%LEIN_ROOT%" (

	
	rem oddly enough /G:/ should've worked but doesn't where / they say it's console
	rem findstr is C:\Windows\System32\findstr.exe
	echo.!LEIN_ROOT! | findstr /C:";" >nul 2>&1 && (
		rem aka errorlevel is 0 aka the string ";" was found
		echo Your folder structure !LEIN_ROOT! contains at least one semicolon in its name
		echo This is not allowed and would break things with the generated bootstrap file
		echo Please correct this by renaming the folders to not contain semicolons in their name
		del !bootstrapfile! >nul 2>&1
		echo You'll also have to recreate the bootstrap file just to be sure it has semicolon-free names inside
		echo the bootstrap file ^(which was just deleted^) is: !bootstrapfile!
		echo  and the info on how to do that is:
		goto RUN_BOOTSTRAP
	)

	if not exist !bootstrapfile! goto NO_DEPENDENCIES

	findstr \^" "!bootstrapfile!" >nul 2>&1
	if errorlevel 1 goto PARSE_BOOTSTRAPFILE
		echo double quotes detected inside file: !bootstrapfile!
		echo this should not be happening
		goto RUN_BOOTSTRAP

:PARSE_BOOTSTRAPFILE
rem will proceed to set LEIN_LIBS and surround each path from bootstrap file in double quotes and separate it from others with a semicolon
rem the paths inside the bootstrap file do not already contain double quotes but may contain spaces
	rem note worthy: the following won't work due to a hard 1022bytes limit truncation in the variable that was set
	rem set /p LEIN_LIBS=<!bootstrapfile!
	rem so this will work instead:
	rem for /f "usebackq delims=" %%j in (!bootstrapfile!) do set LEIN_LIBS=%%j
	rem just  set LEIN_LIBS="%%j"  is uglier/hacky but would also work here instead of the below:
	for /f "usebackq delims=" %%j in ("!bootstrapfile!") do (
		set tmpline=%%j
		call :PROCESSPATH
	)

	rem remove trailing semicolon, if any
	if "!LEIN_LIBS:~-1!x" == ";x" SET LEIN_LIBS=!LEIN_LIBS:~0,-1!
	if not "x%DEBUG%" == "x" echo LEIN_LIBS=!LEIN_LIBS!

    if "x!LEIN_LIBS!" == "x" goto NO_DEPENDENCIES


	rem semicolons in pathes are not supported, spaces are supported by quoting CLASSPATH as a whole
	rem (no end semicolon required)
    set CLASSPATH=!LEIN_LIBS!;!LEIN_ROOT!\src;!LEIN_ROOT!\resources

    :: Apply context specific CLASSPATH entries
    if exist "%~dp0..\.lein-classpath" (
        for /f "tokens=* delims= " %%i in ("%~dp0..\.lein-classpath") do (
            set CONTEXT_CP=%%i
        )

        if NOT "x!CONTEXT_CP!"=="x" (
            set CLASSPATH=!CONTEXT_CP!;!CLASSPATH!
        )
    )
    goto SETUP_JAVA

:RUN_NO_CHECKOUT

    :: Not running from a checkout.
    if not exist "%LEIN_JAR%" goto NO_LEIN_JAR
    set CLASSPATH=%LEIN_JAR%
  
    if exist ".lein-classpath" (
        for /f "tokens=* delims= " %%i in (.lein-classpath) do (
            set CONTEXT_CP=%%i
        )

        if NOT "x!CONTEXT_CP!"=="x" (
            set CLASSPATH=!CONTEXT_CP!;!CLASSPATH!
        )
    )

:SETUP_JAVA

if not "x%DEBUG%" == "x" echo CLASSPATH=!CLASSPATH!
:: ##################################################

if "x!JAVA_CMD!" == "x" set JAVA_CMD=java
if "x!LEIN_JAVA_CMD!" == "x" set LEIN_JAVA_CMD=%JAVA_CMD%

rem remove quotes from around java commands
for /f "usebackq delims=" %%i in ('!JAVA_CMD!') do set JAVA_CMD=%%~i
for /f "usebackq delims=" %%i in ('!LEIN_JAVA_CMD!') do set LEIN_JAVA_CMD=%%~i

if "x%JVM_OPTS%" == "x" set JVM_OPTS=%JAVA_OPTS%
goto RUN

:DownloadFile
set LAST_HTTP_CLIENT=
rem parameters: TargetFileName Address
if "x%HTTP_CLIENT%" == "x" goto TRY_POWERSHELL
    %HTTP_CLIENT% %1 %2
    SET RC=%ERRORLEVEL%
    goto EXITRC

:TRY_POWERSHELL
call powershell -? >nul 2>&1
if NOT ERRORLEVEL 0 goto TRY_WGET
    set LAST_HTTP_CLIENT=powershell
    rem By default: Win7 = PS2, Win 8.0 = PS3 (maybe?), Win 8.1 = PS4, Win10 = PS5
    powershell -Command "& {param($a,$f) if (($PSVersionTable.PSVersion | Select-Object -ExpandProperty Major) -lt 4) { exit 111; } else { $client = New-Object System.Net.WebClient; [Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12; $client.Proxy.Credentials = [System.Net.CredentialCache]::DefaultNetworkCredentials; $client.DownloadFile($a, $f); }}" ""%2"" ""%1""
    SET RC=%ERRORLEVEL%
    goto EXITRC

:TRY_WGET
call wget --help >nul 2>&1
if NOT ERRORLEVEL 0 goto TRY_CURL
    set LAST_HTTP_CLIENT=wget
    call wget -O %1 %2
    SET RC=%ERRORLEVEL%
    goto EXITRC

:TRY_CURL
call curl --help >nul 2>&1
if NOT ERRORLEVEL 0 GOTO NO_HTTP_CLIENT
    rem We set CURL_PROXY to a space character below to pose as a no-op argument
    set LAST_HTTP_CLIENT=curl
    set CURL_PROXY= 
    if NOT "x%HTTPS_PROXY%" == "x" set CURL_PROXY="-x %HTTPS_PROXY%"
    call curl %CURL_PROXY% -f -L -o  %1 %2
    SET RC=%ERRORLEVEL%
    goto EXITRC

:NO_LEIN_JAR
echo.
echo %LEIN_JAR% can not be found.
echo You can try running "lein self-install"
echo or change LEIN_JAR environment variable
echo or edit lein.bat to set appropriate LEIN_JAR path.
echo.
goto EXITRC

:NO_DEPENDENCIES
echo.
echo Leiningen is missing its dependencies.
:RUN_BOOTSTRAP
echo Please run "lein bootstrap" in the leiningen-core/ directory
echo with a stable release of Leiningen. See CONTRIBUTING.md for details.
echo.
goto EXITRC

:SELF_INSTALL
if exist "%LEIN_JAR%" (
    echo %LEIN_JAR% already exists. Delete and retry.
    goto EXITRC
)

for %%f in ("%LEIN_JAR%") do set LEIN_INSTALL_DIR="%%~dpf"
if not exist %LEIN_INSTALL_DIR% mkdir %LEIN_INSTALL_DIR%

echo Downloading Leiningen now...

set LEIN_JAR_URL=https://github.com/technomancy/leiningen/releases/download/%LEIN_VERSION%/leiningen-%LEIN_VERSION%-standalone.zip
call :DownloadFile "%LEIN_JAR%.pending" "%LEIN_JAR_URL%"
SET RC=%ERRORLEVEL%
if not %RC% == 0 goto DOWNLOAD_FAILED
if not exist "%LEIN_JAR%.pending" goto DOWNLOAD_FAILED
move /y "%LEIN_JAR%.pending" "%LEIN_JAR%" >nul 2>&1
SET RC=%ERRORLEVEL%
goto EXITRC

:DOWNLOAD_FAILED
SET RC=3
if "%ERRORLEVEL%" == "111" (
    echo.
    echo You seem to be using an old version of PowerShell that
    echo can't download files via TLS 1.2.
    echo Please upgrade your PowerShell to at least version 4.0, e.g. via
    echo https://www.microsoft.com/en-us/download/details.aspx?id=50395
    echo.
    echo Alternatively you can manually download
    echo %LEIN_JAR_URL%
    echo and save it as
    echo %LEIN_JAR%
    echo.
    echo If you have "curl" or "wget" you can try setting the HTTP_CLIENT
    echo variable, but the TLS problem might still persist.
    echo.
    echo   a^) set HTTP_CLIENT=wget -O
    echo   b^) set HTTP_CLIENT=curl -f -L -o
    echo.
    echo NOTE: Make sure to *not* add double quotes when setting the value
    echo       of HTTP_CLIENT
    goto EXITRC
)
SET RC=3
del "%LEIN_JAR%.pending" >nul 2>&1
echo.
echo Failed to download %LEIN_JAR_URL%
echo.
echo It is possible that the download failed due to "powershell", 
echo "curl" or "wget"'s inability to retrieve GitHub's security certificate.
echo.

if "%LAST_HTTP_CLIENT%" == "powershell" (
  echo The PowerShell failed to download the latest Leiningen version.
  echo Try to use "curl" or "wget" to download Leiningen by setting up
  echo the HTTP_CLIENT environment variable with one of the following 
  echo values:
  echo.
  echo   a^) set HTTP_CLIENT=wget -O
  echo   b^) set HTTP_CLIENT=curl -f -L -o
  echo.
  echo NOTE: Make sure to *not* add double quotes when setting the value
  echo       of HTTP_CLIENT
)

if "%LAST_HTTP_CLIENT%" == "curl" (
  echo Curl failed to download the latest Leiningen version.
  echo Try to use "wget" to download Leiningen by setting up
  echo the HTTP_CLIENT environment variable with one of the following 
  echo values:
  echo.
  echo   a^) set HTTP_CLIENT=wget -O
  echo.
  echo NOTE: Make sure to *not* add double quotes when setting the value
  echo       of HTTP_CLIENT
  echo. 
  echo If neither curl nor wget can download Leiningen, please seek
  echo for help on Leiningen's GitHub project issues page.
)

if "%LAST_HTTP_CLIENT%" == "wget" (
  echo Curl failed to download the latest Leiningen version.
  echo Try to use "wget" to download Leiningen by setting up
  echo the HTTP_CLIENT environment variable with one of the following 
  echo values:
  echo.
  echo.   a^) set HTTP_CLIENT=curl -f -L -o
  echo.
  echo NOTE: make sure *not* to add double quotes to set the value of 
  echo       HTTP_CLIENT
  echo. 
  echo If neither curl nor wget can download Leiningen, please seek
  echo for help on Leiningen's GitHub project issues page.
)

if %SNAPSHOT% == YES echo See README.md for SNAPSHOT build instructions.
echo.
goto EOF


:UPGRADE
set LEIN_BAT=%~dp0%~nx0
set TARGET_VERSION=%2
if "x%2" == "x" set TARGET_VERSION=stable
echo The script at %LEIN_BAT% will be upgraded to the latest %TARGET_VERSION% version.
set /P ANSWER=Do you want to continue (Y/N)?
if /i {%ANSWER%}=={y}   goto YES_UPGRADE
if /i {%ANSWER%}=={yes} goto YES_UPGRADE
echo Aborted.
goto EXITRC


:YES_UPGRADE
echo Downloading latest Leiningen batch script...

set LEIN_BAT_URL=https://github.com/technomancy/leiningen/raw/%TARGET_VERSION%/bin/lein.bat
set TEMP_BAT=%~dp0temp-lein-%RANDOM%%RANDOM%.bat
call :DownloadFile "%LEIN_BAT%.pending" "%LEIN_BAT_URL%"
if ERRORLEVEL 0 goto EXEC_UPGRADE
    del "%LEIN_BAT%.pending" >nul 2>&1
    echo Failed to download %LEIN_BAT_URL%
    goto EXITRC
:EXEC_UPGRADE
move /y "%LEIN_BAT%.pending" "%TEMP_BAT%" >nul 2>&1
echo.
echo Upgrading...
set LEIN_JAR=
call "%TEMP_BAT%" self-install
(
   rem This is self-modifying batch code. Use brackets to pre-load the exit command.
   rem This way, script execution does not depend on whether the replacement script
   rem has that command at the *very same* file position as the calling batch file.
   move /y "%TEMP_BAT%" "%LEIN_BAT%" >nul 2>&1
   exit /B %ERRORLEVEL%
)

:NO_HTTP_CLIENT
echo.
echo ERROR: Neither PowerShell, Wget, or Curl could be found.
echo        Make sure at least one of these tools is installed
echo        and is in PATH. You can get them from URLs below:
echo.
echo PowerShell: "http://www.microsoft.com/powershell"

rem echo Wget:       "http://users.ugent.be/~bpuype/wget/"
rem Note: Stale URL. HTTP 404.
rem Alternative: wget64.exe compiled by J. Simoncic, rename to wget.exe
rem MD5 1750c130c5daca8b347d3f7e34824c9b
rem Check: https://www.virustotal.com/en/file/abf507f8240ed41aac74c9df6de558c88c2f11d7770f02.8.4-SNAPSHOT5f1cc544b9c08b/analysis/
echo Wget:       "https://eternallybored.org/misc/wget/"

echo Curl:       "http://curl.haxx.se/dlwiz/?type=bin&os=Win32&flav=-&ver=2000/XP"
echo.
goto EXITRC


:SET_LEIN_ROOT
set LEIN_ROOT=%~f1
goto EOF

:: Find directory containing filename supplied in first argument
:: looking in current directory, and looking up the parent
:: chain until we find it, or run out
:: returns result in %DIR_CONTAINING%
:: empty string if we don't find it
:FIND_DIR_CONTAINING_UPWARDS
set DIR_CONTAINING=%CD%
set LAST_DIR=

:LOOK_AGAIN
if "%DIR_CONTAINING%" == "%LAST_DIR%" (
    :: didn't find it
    set DIR_CONTAINING=
    goto EOF
)

if EXIST "%DIR_CONTAINING%\%1" (
    :: found it - use result in DIR_CONTAINING
    goto EOF
)

set LAST_DIR=%DIR_CONTAINING%
call :GET_PARENT_PATH "%DIR_CONTAINING%\.."
set DIR_CONTAINING=%PARENT_PATH%
goto LOOK_AGAIN

:GET_PARENT_PATH
set PARENT_PATH=%~f1
goto EOF


:RUN
:: We need to disable delayed expansion here because the %* variable
:: may contain bangs (as in test!). There may also be special
:: characters inside the TRAMPOLINE_FILE.
setLocal DisableDelayedExpansion

set "TRAMPOLINE_FILE=%TEMP%\lein-trampoline-%RANDOM%.bat"
del "%TRAMPOLINE_FILE%" >nul 2>&1

set ERRORLEVEL=
set RC=0
"%LEIN_JAVA_CMD%" -client %LEIN_JVM_OPTS% ^
 -Dfile.encoding=UTF-8 ^
 -Dclojure.compile.path="%DIR_CONTAINING%/target/classes" ^
 -Dleiningen.original.pwd="%ORIGINAL_PWD%" ^
 -cp "%CLASSPATH%" clojure.main -m leiningen.core.main %*
SET RC=%ERRORLEVEL%
if not %RC% == 0 goto EXITRC

if not exist "%TRAMPOLINE_FILE%" goto EOF
call "%TRAMPOLINE_FILE%"
del "%TRAMPOLINE_FILE%" >nul 2>&1
goto EOF


:PROCESSPATH
rem will surround each path with double quotes before appending it to LEIN_LIBS
	for /f "tokens=1* delims=;" %%a in ("%tmpline%") do (
		set LEIN_LIBS=!LEIN_LIBS!"%%a";
		set tmpline=%%b
	)
	if not "%tmpline%" == "" goto PROCESSPATH
	goto EOF

:EXITRC
exit /B %RC%

:EOF

Virus Scan Results

Lein.2.9.6.nupkg (953a6e63d8c4) - ## / 60
leiningen-2.9.6-standalone.zip (41c543f73eec) - ## / 54

In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).

Chocolatey Pro provides runtime protection from possible malware.

Version History

Version	Downloads	Last Updated	Status
Leiningen - Clojure Project Automation 2.11.2	2139	Sunday, February 18, 2024	Approved
Leiningen - Clojure Project Automation 2.11.1	234	Monday, January 29, 2024	Approved
Leiningen - Clojure Project Automation 2.10.0	1819	Friday, December 9, 2022	Approved
Leiningen - Clojure Project Automation 2.9.10	793	Wednesday, August 10, 2022	Approved
Leiningen - Clojure Project Automation 2.9.8	1087	Friday, February 18, 2022	Approved
Leiningen - Clojure Project Automation 2.9.7	1239	Thursday, September 16, 2021	Approved
Leiningen - Clojure Project Automation 2.9.6	2224	Saturday, April 17, 2021	Approved
Leiningen - Clojure Project Automation 2.9.5	19618	Thursday, December 10, 2020	Approved
Leiningen - Clojure Project Automation 2.9.4	29104	Monday, July 13, 2020	Approved
Leiningen - Clojure Project Automation 2.9.3	24899	Monday, March 16, 2020	Approved
Leiningen - Clojure Project Automation 2.9.1	23554	Thursday, February 28, 2019	Approved
Leiningen - Clojure Project Automation 2.9.0	531	Monday, February 11, 2019	Approved
Leiningen - Clojure Project Automation 2.8.3	875	Sunday, December 16, 2018	Approved
Leiningen - Clojure Project Automation 2.8.1	7790	Saturday, October 28, 2017	Approved
Leiningen - Clojure Project Automation 2.7.1.20170914	716	Wednesday, September 13, 2017	Approved
Leiningen - Clojure Project Automation 2.7.1	1532	Tuesday, December 13, 2016	Approved
Leiningen - Clojure Project Automation 2.2.0	3623	Thursday, June 6, 2013	Approved

Release Notes

https://github.com/technomancy/leiningen/blob/2.9.6/NEWS.md

Dependencies

- openjdk (≥ 11.0)

Discussion for the Leiningen - Clojure Project Automation Package

Ground Rules:

This discussion is only about Leiningen - Clojure Project Automation and the Leiningen - Clojure Project Automation package. If you have feedback for Chocolatey, please contact the Google Group.
This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
Tell us what you love about the package or Leiningen - Clojure Project Automation, or tell us what needs improvement.
Share your experiences with the package, or extra configuration or gotchas that you've found.
If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.

Resources

Events

Courses

122,037

2,224

17 Apr 2021

Leiningen - Clojure Project Automation

Leiningen - Clojure Project Automation 2.9.6

All Checks are Passing

Deployment Method: Individual Install, Upgrade, & Uninstall

Deployment Method:

1. Enter Your Internal Repository Url

2. Setup Your Environment

1. Ensure you are set for organizational deployment

2. Get the package into your environment

3. Copy Your Script

4. If applicable - Chocolatey configuration/installation

Ground Rules: