Step 1: Review Your Packages

Step 2: Choose Your Integration Method

Step 3: Copy Your Script or Download Config

Option 1: Copy Script

Option 2: Download Config

Step 4: Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the packages and push them to a repository
  Download Packages

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the packages:
  Download Packages
- Follow manual internalization instructions
Package Internalizer (C4B)
- Run: (additional options)
- For package and dependencies run:
- Automate package internalization

Step 5: Copy Your Script

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###

#### We initialize a few things that are needed by this script - there are no other requirements.
$ErrorActionPreference = "Stop"

#### Set TLS 1.2 (3072) as that is the minimum required by various up-to-date repositories.
#### Use integers because the enumeration value for TLS 1.2 won't exist
#### in .NET 4.0, even though they are addressable if .NET 4.5+ is
#### installed (.NET 4.5 is an in-place upgrade).
[System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072

#### We use this variable for future REST calls.
$RequestArguments = @{
    UseBasicParsing = $true
}

## 2. TOP LEVEL VARIABLES ##

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# $NugetRepositoryCredential = [PSCredential]::new(
#     "username",
#     ("password" | ConvertTo-SecureString -AsPlainText -Force)
# )
# $RequestArguments.Credential = $NugetRepositoryCredential

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it
$ChocolateyDownloadUrl = "$($NugetRepositoryUrl.TrimEnd('/'))/package/chocolatey.2.4.0.nupkg"

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# $ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

#### Download the Nupkg, appending .zip to the filename to handle archive cmdlet limitations
if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    $TempDirectory = Join-Path $env:Temp "chocolateyInstall"
    if (-not (Test-Path $TempDirectory -PathType Container)) {
        $null = New-Item -Path $TempDirectory -ItemType Directory
    }
    $DownloadedNupkg = Join-Path $TempDirectory "$(Split-Path $ChocolateyDownloadUrl -Leaf).zip"
    Invoke-WebRequest -Uri $ChocolateyDownloadUrl -OutFile $DownloadedNupkg @RequestArguments

    #### Extract the Nupkg, and run the chocolateyInstall script
    if (Get-Command Microsoft.PowerShell.Archive\Expand-Archive -ErrorAction SilentlyContinue) {
        Microsoft.PowerShell.Archive\Expand-Archive -Path $DownloadedNupkg -DestinationPath $TempDirectory -Force
    } else {
        # PowerShell versions <4.0 do not have this function available
        try {
            $shellApplication = New-Object -ComObject Shell.Application
            $zipPackage = $shellApplication.NameSpace($DownloadedNupkg)
            $destinationFolder = $shellApplication.NameSpace($TempDirectory)
            $destinationFolder.CopyHere($zipPackage.Items(), 0x10)
        } catch {
            Write-Warning "Unable to unzip package using built-in compression."
            throw $_
        }
    }

    & $(Join-Path $TempDirectory "tools\chocolateyInstall.ps1")
}

if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    refreshenv
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# choco feature enable -n useFipsCompliantChecksums

### b. Apply Recommended Configuration ###
#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
choco config set --name cacheLocation --value C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
choco config set --name commandExecutionTimeoutSeconds --value 14400

#### Turn off download progress when running choco through integrations
choco feature disable --name showDownloadProgress

### c. Sources ###
#### Remove the default community package repository source
choco source list --limitoutput | ConvertFrom-Csv -Header 'Name', 'Location' -Delimiter '|' | ForEach-Object {
    if ($_.Location -eq 'https://community.chocolatey.org/api/v2/') {
        choco source remove -n $_.Name
    }
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
if ($NugetRepositoryCredential) {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --user $NugetRepositoryCredential.UserName --password $NugetRepositoryCredential.GetNetworkCredential().Password --priority 1
} else {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --priority 1
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
choco upgrade chocolatey --confirm

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
choco install chocolatey-license --source $NugetRepositoryUrl --confirm

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco source disable --name chocolatey.licensed
} else {
    Write-Warning "Not disabling 'chocolatey.licensed' feed, as Chocolatey-License has not been installed."
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco install chocolatey.extension --source $NugetRepositoryUrl --confirm
} else {
    Write-Warning "Not installing 'chocolatey.extension', as Chocolatey-License has not been installed."
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
choco feature disable --name showNonElevatedWarnings
choco feature enable --name useBackgroundService
choco feature enable --name useBackgroundServiceWithNonAdministratorsOnly
choco feature enable --name allowBackgroundServiceUninstallsFromUserInstallsOnly
choco config set --name allowedBackgroundServiceCommands --value "install,upgrade,uninstall"

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if ($ChocolateyCentralManagementUrl) {
    choco install chocolatey-agent --source $NugetRepositoryUrl --confirm
    choco config set --name CentralManagementServiceUrl --value $ChocolateyCentralManagementUrl
    if ($ChocolateyCentralManagementClientSalt) {
        choco config set --name centralManagementClientCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementClientSalt
    }
    if ($ChocolateyCentralManagementServiceSalt) {
        choco config set --name centralManagementServiceCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementServiceSalt
    }
    choco feature enable --name useChocolateyCentralManagement
    choco feature enable --name useChocolateyCentralManagementDeployments
}

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. chocolatey.chocolatey
##### You will require the chocolatey.chocolatey collection to be installed
##### on all machines using this playbook.
##### Please see https://github.com/chocolatey/chocolatey-ansible/#installing-the-collection-from-ansible-galaxy

- name: Install and Configure Chocolatey
  hosts: all

## 2. TOP LEVEL VARIABLES ##
  vars:

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
    nuget_repository_url: INTERNAL REPO URL

### b. Internal Repository Credential ###
#### If required, add the repository access credential here and
#### uncomment lines with source_username and source_password below
#    nuget_repository_username: username
#    nuget_repository_password: password

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#    chocolatey_central_management_url: https://chocolatey-central-management:24020/ChocolateyManagementService

#### ii. If using a Client Salt, add it here
#    chocolatey_central_management_client_salt: clientsalt

#### iii. If using a Service Salt, add it here
#    chocolatey_central_management_service_salt: servicesalt

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

  tasks:
  - name: Install chocolatey
    win_chocolatey:
      name: chocolatey
      source: ""{{ nuget_repository_url }}""
      # source_username: ""{{ nuget_repository_username }}""
      # source_password: ""{{ nuget_repository_password }}""

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#   - name: Enable FIPS compliance
#     win_chocolatey_feature:
#       name: useFipsCompliantChecksums
#       state: enabled

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
  - name: Set the cache location
    win_chocolatey_config:
      name: cacheLocation
      state: present
      value: C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
  - name: Set the command execution timeout
    win_chocolatey_config:
      name: commandExecutionTimeoutSeconds
      state: present
      value: 14400

#### Turn off download progress when running choco through integrations
  - name: Disable showing download progress
    win_chocolatey_feature:
      name: showDownloadProgress
      state: disabled

### c. Sources ###
#### Remove the default community package repository source
  - name: Remove Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey
      state: absent

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here
#### NOTE: This EXAMPLE may require changes
  - name: Add Internal Repository
    win_chocolatey_source:
      name: ChocolateyInternal
      state: present
      source: {{ nuget_repository_url }}
      # source_username: {{ nuget_repository_username }}
      # source_password: {{ nuget_repository_password }}
      priority: 1

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
  - name: Upgrade Chocolatey
    win_chocolatey:
      name: chocolatey
      state: latest

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.
### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
  - name: Install Chocolatey License
    win_chocolatey:
      name: chocolatey-license
      source: ChocolateyInternal
      state: latest

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
  - name: Disable Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey.licensed
      state: disabled

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
  - name: Install Chocolatey Extension
    win_chocolatey:
      name: chocolatey.extension
      source: ChocolateyInternal
      state: latest

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
  - name: Hide not-elevated warnings
    win_chocolatey_feature:
      name: showNonElevatedWarnings
      state: disabled

  - name: Use background mode for self-service
    win_chocolatey_feature:
      name: useBackgroundService
      state: enabled

  - name: Use background service for non-admins
    win_chocolatey_feature:
      name: useBackgroundServiceWithNonAdministratorsOnly
      state: enabled

  - name: Allow background uninstallation for user installs
    win_chocolatey_feature:
      name: allowBackgroundServiceUninstallsFromUserInstallsOnly
      state: enabled

  - name: Set allowed background service commands
    win_chocolatey_config:
      name: backgroundServiceAllowedCommands
      state: present
      value: install,upgrade,uninstall

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
  - name: Install Chocolatey Agent
    when: chocolatey_central_management_url is defined
    win_chocolatey:
      name: chocolatey-agent
      source: ChocolateyInternal
      state: latest

  - name: Set the Central Management Service URL
    when: chocolatey_central_management_url is defined
    win_chocolatey_config:
      name: CentralManagementServiceUrl
      state: present
      value: {{ chocolatey_central_management_url }}

  - name: Set the Central Management Client Salt
    when: chocolatey_central_management_client_salt is defined
    win_chocolatey_config:
      name: centralManagementClientCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_client_salt }}

  - name: Set the Central Management Service Salt
    when: chocolatey_central_management_service_salt is defined
    win_chocolatey_config:
      name: centralManagementServiceCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_service_salt }}

  - name: Use Central Management
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagement
      state: enabled

  - name: Use Central Management Deployments
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagementDeployments
      state: enabled

See docs at https://docs.chef.io/resource_chocolatey_package.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### The Chocolatey resources are available with any recent version of Chef.
#### We utilise the Chocolatey recipe to install the Chocolatey binaries.
include_recipe "chocolatey"

## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# NugetRepositoryUsername = "username"
# NugetRepositoryPassword = "password"

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
ChocolateyNupkgUrl = "INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg",

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
node['chocolatey']['install vars'] = {
  'chocolateyDownloadUrl' => "#{ChocolateyNupkgUrl}",
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# chocolatey_feature 'useFipsCompliantChecksums' do
#   action :enable
# end

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolatey_config 'cacheLocation' do
  value 'C:\ProgramData\chocolatey\cache'
end

#### Increase timeout to at least 4 hours
chocolatey_config 'commandExecutionTimeoutSeconds' do
  value '14400'
end

#### Turn off download progress when running choco through integrations
chocolatey_feature 'showDownloadProgress' do
  action :disable
end

### c. Sources ###
#### Remove the default community package repository source
chocolatey_source 'chocolatey' do
  action :remove
end

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
chocolatey_source 'ChocolateyInternal' do
  source "#{NugetRepositoryUrl}"
  priority 1
  action   :add
end

execute 'ChocolateyInternal' do
  command "choco source add --name ChocolateyInternal -s #{NugetRepositoryUrl} -u=#{NugetRepositoryUsername} -p=#{NugetRepositoryPassword} --priority=1"
  only_if { NugetRepositoryUsername != nil || NugetRepositoryPassword != nil }
end

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
chocolatey_package 'chocolatey' do
  action :upgrade
  source "#{NugetRepositoryUrl}"
end

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
chocolatey_package 'chocolatey-license' do
  action :install
  source "#{NugetRepositoryUrl}"
end

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
chocolatey_source 'chocolatey.licensed' do
  action            :disable
end

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
chocolatey_package 'chocolatey.extention' do
  action     install
  source     "#{NugetRepositoryUrl}"
end

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolatey_feature 'showNonElevatedWarnings' do
  action :disable
end

chocolatey_feature 'useBackgroundService' do
  action :enable
end

chocolatey_feature 'useBackgroundServiceWithNonAdministratorsOnly' do
  action :enable
end

chocolatey_feature 'allowBackgroundServiceUninstallsFromUserInstallsOnly' do
  action :enable
end

chocolatey_config 'backgroundServiceAllowedCommands' do
  value 'install,upgrade,uninstall'
end

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
chocolatey_package 'chocolatey-agent' do
  action     install
  source     "#{NugetRepositoryUrl}"
  # user       "#{NugetRepositoryUsername}"
  # password   "#{NugetRepositoryPassword}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'CentralManagementServiceUrl' do
  value  "#{ChocolateyCentralManagementUrl}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'centralManagementClientCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementClientSalt}"
  only_if { ChocolateyCentralManagementClientSalt != nil }
end

chocolatey_config 'centralManagementServiceCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementServiceSalt}"
  only_if { ChocolateyCentralManagementServiceSalt != nil }
end

chocolatey_feature 'useChocolateyCentralManagement' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_feature 'useChocolateyCentralManagementDeployments' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.

If Applicable - Chocolatey Configuration/Installation


#requires -Modules cChoco
## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires chocolatey\cChoco DSC module to be installed on the machine compiling the DSC manifest
#### NOTE: This will need to be installed before running the DSC portion of this script
if (-not (Get-Module cChoco -ListAvailable)) {
    $null = Install-PackageProvider -Name NuGet -MinimumVersion 2.8.5.201 -Force
    if (($PSGallery = Get-PSRepository -Name PSGallery).InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy Trusted
    }
    Install-Module -Name cChoco
    if ($PSGallery.InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy $PSGallery.InstallationPolicy
    }
}

#### ii. Requires a hosted copy of the install.ps1 script
##### This should be available to download without authentication.
##### The original script can be found here: https://community.chocolatey.org/install.ps1

Configuration ChocolateyConfig {
## 2. TOP LEVEL VARIABLES ##
    param(
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
        $NugetRepositoryUrl      = "INTERNAL REPO URL",

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
        $ChocolateyNupkgUrl      = "INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg",

### c. Internal Repository Credential ###
#### If required, add the repository access credential here
#        $NugetRepositoryCredential = [PSCredential]::new(
#            "username",
#            ("password" | ConvertTo-SecureString -AsPlainText -Force)
#        ),

### d. Install.ps1 URL
#### The path to the hosted install script:
        $ChocolateyInstallPs1Url = "https://community.chocolatey.org/install.ps1"

### e. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#        $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService",

#### ii. If using a Client Salt, add it here
#        $ChocolateyCentralManagementClientSalt = "clientsalt",

#### iii. If using a Service Salt, add it here
#        $ChocolateyCentralManagementServiceSalt = "servicesalt"
    )
    Import-DscResource -ModuleName PSDesiredStateConfiguration
    Import-DscResource -ModuleName cChoco

    Node 'localhost' {
## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
        Environment chocoDownloadUrl {
            Name  = "chocolateyDownloadUrl"
            Value = $ChocolateyNupkgUrl
        }

        cChocoInstaller installChocolatey {
            DependsOn = "[Environment]chocoDownloadUrl"
            InstallDir = Join-Path $env:ProgramData "chocolatey"
            ChocoInstallScriptUrl = $ChocolateyInstallPs1Url
        }

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#        cChocoFeature featureFipsCompliance {
#            FeatureName = "useFipsCompliantChecksums"
#        }

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
        cChocoConfig cacheLocation {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "cacheLocation"
            Value      = "C:\ProgramData\chocolatey\cache"
        }

#### Increase timeout to at least 4 hours
        cChocoConfig commandExecutionTimeoutSeconds {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "commandExecutionTimeoutSeconds"
            Value      = 14400
        }

#### Turn off download progress when running choco through integrations
        cChocoFeature showDownloadProgress {
            DependsOn   = "[cChocoInstaller]installChocolatey"
            FeatureName = "showDownloadProgress"
            Ensure      = "Absent"
        }

### c. Sources ###
#### Remove the default community package repository source
        cChocoSource removeCommunityRepository {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name       = "chocolatey"
            Ensure     = "Absent"
        }

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here.
#### NOTE: This EXAMPLE may require changes
        cChocoSource addInternalSource {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name        = "ChocolateyInternal"
            Source      = $NugetRepositoryUrl
            Credentials = $NugetRepositoryCredential
            Priority    = 1
        }

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
        cChocoPackageInstaller updateChocolatey {
            DependsOn   = "[cChocoSource]addInternalSource", "[cChocoSource]removeCommunityRepository"
            Name        = "chocolatey"
            AutoUpgrade = $true
        }

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
        cChocoPackageInstaller chocolateyLicense {
            DependsOn = "[cChocoPackageInstaller]updateChocolatey"
            Name      = "chocolatey-license"
        }

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
        Script disableLicensedSource {
            DependsOn  = "[cChocoPackageInstaller]chocolateyLicense"
            GetScript  = {
                $Source = choco source list --limitoutput | `
                    ConvertFrom-Csv -Delimiter '|' -Header Name, Source, Disabled | `
                    Where-Object Name -eq "chocolatey.licensed"

                return @{
                    Result = if ($Source) {
                        [bool]::Parse($Source.Disabled)
                    } else {
                        Write-Warning "Source 'chocolatey.licensed' was not present."
                        $true  # Source does not need disabling
                    }
                }
            }
            SetScript  = {
                $null = choco source disable --name "chocolatey.licensed"
            }
            TestScript = {
                $State = [ScriptBlock]::Create($GetScript).Invoke()
                return $State.Result
            }
        }

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
        cChocoPackageInstaller chocolateyLicensedExtension {
            DependsOn = "[Script]disableLicensedSource"
            Name      = "chocolatey.extension"
        }

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
        cChocoFeature hideElevatedWarnings {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "showNonElevatedWarnings"
            Ensure      = "Absent"
        }

        cChocoFeature useBackgroundService {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundService"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceWithNonAdmins {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundServiceWithNonAdministratorsOnly"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceUninstallsForUserInstalls {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "allowBackgroundServiceUninstallsFromUserInstallsOnly"
            Ensure      = "Present"
        }

        cChocoConfig allowedBackgroundServiceCommands {
            DependsOn   = "[cChocoFeature]useBackgroundService"
            ConfigName = "backgroundServiceAllowedCommands"
            Value       = "install,upgrade,uninstall"
        }

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
        if ($ChocolateyCentralManagementUrl) {
            cChocoPackageInstaller chocolateyAgent {
                DependsOn = "[cChocoPackageInstaller]chocolateyLicensedExtension"
                Name      = "chocolatey-agent"
            }

            cChocoConfig centralManagementServiceUrl {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                ConfigName = "CentralManagementServiceUrl"
                Value       = $ChocolateyCentralManagementUrl
            }

            if ($ChocolateyCentralManagementClientSalt) {
                cChocoConfig centralManagementClientSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementClientCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementClientSalt
                }
            }

            if ($ChocolateyCentralManagementServiceSalt) {
                cChocoConfig centralManagementServiceSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementServiceCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementServiceSalt
                }
            }

            cChocoFeature useCentralManagement {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagement"
                Ensure      = "Present"
            }

            cChocoFeature useCentralManagementDeployments {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagementDeployments"
                Ensure      = "Present"
            }
        }
    }
}

# If working this into an existing configuration with a good method for
$ConfigData = @{
    AllNodes = @(
        @{
            NodeName                    = "localhost"
            PSDscAllowPlainTextPassword = $true
        }
    )
}

try {
    Push-Location $env:Temp
    $Config = ChocolateyConfig -ConfigurationData $ConfigData
    Start-DscConfiguration -Path $Config.PSParentPath -Wait -Verbose -Force
} finally {
    Pop-Location
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires puppetlabs/chocolatey module
####  See https://forge.puppet.com/puppetlabs/chocolatey


## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$_repository_url = 'INTERNAL REPO URL'

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
$_choco_download_url = 'INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg'

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $_chocolatey_central_management_url = 'https://chocolatey-central-management:24020/ChocolateyManagementService'

#### ii. If using a Client Salt, add it here
# $_chocolatey_central_management_client_salt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $_chocolatey_central_management_service_salt = 'servicesalt'


## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
### Note: `chocolatey_download_url is completely different than normal
###  source locations. This is directly to the bare download url for the
###  chocolatey.nupkg, similar to what you see when you browse to
###  https://community.chocolatey.org/api/v2/package/chocolatey
class {'chocolatey':
  chocolatey_download_url => $_choco_download_url,
  use_7zip                => false,
}


## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations

#chocolateyfeature {'useFipsCompliantChecksums':
#  ensure => enabled,
#}

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolateyconfig {'cacheLocation':
  value => 'C:\ProgramData\chocolatey\cache',
}

#### Increase timeout to at least 4 hours
chocolateyconfig {'commandExecutionTimeoutSeconds':
  value => '14400',
}

#### Turn off download progress when running choco through integrations
chocolateyfeature {'showDownloadProgress':
  ensure => disabled,
}

### c. Sources ###
#### Remove the default community package repository source
chocolateysource {'chocolatey':
  ensure   => absent,
  location => 'https://community.chocolatey.org/api/v2/',
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE requires changes
chocolateysource {'internal_chocolatey':
  ensure             => present,
  location           => $_repository_url,
  priority           => 1,
  username           => 'optional',
  password           => 'optional,not ensured',
  bypass_proxy       => true,
  admin_only         => false,
  allow_self_service => false,
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/

package {'chocolatey':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}


## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/guides/organizations/organizational-deployment-guide#exercise-4-create-a-package-for-the-license

# TODO: Add resource for installing/ensuring the chocolatey-license package
package {'chocolatey-license':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
## Disabled sources still need all other attributes until
## https://tickets.puppetlabs.com/browse/MODULES-4449 is resolved.
## Password is necessary with user, but not ensurable, so it should not
## matter what it is set to here. If you ever do get into trouble here,
## the password is your license GUID.
chocolateysource {'chocolatey.licensed':
  ensure   => disabled,
  priority => '10',
  user     => 'customer',
  password => '1234',
  require  => Package['chocolatey-license'],
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
package {'chocolatey.extension':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
  require  => Package['chocolatey-license'],
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolateyfeature {'showNonElevatedWarnings':
  ensure => disabled,
}

chocolateyfeature {'useBackgroundService':
  ensure => enabled,
}

chocolateyfeature {'useBackgroundServiceWithNonAdministratorsOnly':
  ensure => enabled,
}

chocolateyfeature {'allowBackgroundServiceUninstallsFromUserInstallsOnly':
  ensure => enabled,
}

chocolateyconfig {'backgroundServiceAllowedCommands':
  value => 'install,upgrade,uninstall',
}

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if $_chocolatey_central_management_url {
  package {'chocolatey-agent':
    ensure   => latest,
    provider => chocolatey,
    source   => $_repository_url,
    require  => Package['chocolatey-license'],
  }

  chocolateyconfig {'CentralManagementServiceUrl':
    value   => $_chocolatey_central_management_url,
  }

  if $_chocolatey_central_management_client_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  if $_chocolatey_central_management_service_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  chocolateyfeature {'useChocolateyCentralManagement':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }

  chocolateyfeature {'useChocolateyCentralManagementDeployments':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }
}

Need Help? View our docs or file an issue.

There is already a version of this package in your Script Builder

Current Version	New Version

Downloads:

181,364

Downloads of v 1.20.0:

227

Last Update:

16 Oct 2024

Package Maintainer(s):

flcdrg

Software Author(s):

Mitchell Hashimoto
Armon Dadgar
HashiCorp

Tags:

consul service consul.io

Consul

This is not the latest version of Consul available.

1.20.0 | Updated: 16 Oct 2024

Downloads:

181,364

Downloads of v 1.20.0:

227

Maintainer(s):

flcdrg

Software Author(s):

Mitchell Hashimoto
Armon Dadgar
HashiCorp

Tags:

consul service consul.io

Consul 1.20.0

This is not the latest version of Consul available.

Legal Disclaimer: Neither this package nor Chocolatey Software, Inc. are affiliated with or endorsed by Mitchell Hashimoto, Armon Dadgar, HashiCorp. The inclusion of Mitchell Hashimoto, Armon Dadgar, HashiCorp trademark(s), if any, upon this webpage is solely to identify Mitchell Hashimoto, Armon Dadgar, HashiCorp goods or services and not for commercial purposes.

All Checks are Passing

3 Passing Tests

Show Checks

Validation Testing Passed

Verification Testing Passed

Details

Scan Testing Successful:

No detections found in any package files

Details

Learn More

Deployment Method: Individual Install, Upgrade, & Uninstall

To install Consul, run the following command from the command line or from PowerShell:

To upgrade Consul, run the following command from the command line or from PowerShell:

To uninstall Consul, run the following command from the command line or from PowerShell:

NOTE

This applies to both open source and commercial editions of Chocolatey.

1. Enter Your Internal Repository Url

(this should look similar to https://community.chocolatey.org/api/v2/)

2. Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the package and push it to a repository Download

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the package:
  Download
- Follow manual internalization instructions

Package Internalizer (C4B)

Run: (additional options)

choco download consul --internalize --version=1.20.0 --source=https://community.chocolatey.org/api/v2/

For package and dependencies run:

choco push --source="'INTERNAL REPO URL'"

Automate package internalization

3. Copy Your Script

choco upgrade consul -y --source="'INTERNAL REPO URL'" --version="'1.20.0'" [other options]

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:


choco upgrade consul -y --source="'INTERNAL REPO URL'" --version="'1.20.0'" 
$exitCode = $LASTEXITCODE

Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
  Exit 0
}

Exit $exitCode


- name: Install consul
  win_chocolatey:
    name: consul
    version: '1.20.0'
    source: INTERNAL REPO URL
    state: present

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.


chocolatey_package 'consul' do
  action    :install
  source   'INTERNAL REPO URL'
  version  '1.20.0'
end

See docs at https://docs.chef.io/resource_chocolatey_package.html.


cChocoPackageInstaller consul
{
    Name     = "consul"
    Version  = "1.20.0"
    Source   = "INTERNAL REPO URL"
}

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.


package { 'consul':
  ensure   => '1.20.0',
  provider => 'chocolatey',
  source   => 'INTERNAL REPO URL',
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

4. If applicable - Chocolatey configuration/installation

See infrastructure management matrix for Chocolatey configuration elements and examples.

Package Approved

This package was approved as a trusted package on 16 Oct 2024.

Description

Consul is a tool for service discovery and configuration. Consul is distributed, highly available, and extremely scalable.
Uses NSSM as the service wrapper. More info at: https://nssm.cc/

Package Parameters

The package parameters can be set -

/noservice - Disables installation of Windows service
/apiaddr - Sets environment variable CONSUL_HTTP_ADDR for easy execute commands on remote agent
/agentargs - Sets up Consul agent options via commandline for Consul agent service

These parameters can be passed to the installer with the use of --params.
For example:

--params="'/noservice /apiaddr=http://10.0.0.1:8500'"
--params="'/agentargs=""-config-file %PROGRAMDATA%\consul\dsc-config\default.json -client 10.0.0.1""'" (be cautious of quotes)

For setting Consul agent CLI options, it is better dropping a config.hcl into %PROGRAMDATA%\consul\config instead of setting them with package parameters.

Files

tools\.skipAutoUninstall

tools\chocolateyBeforeModify.ps1

Get-Process consul -ErrorAction SilentlyContinue | Stop-Process -Force -ErrorAction SilentlyContinue

tools\chocolateyInstall.ps1

# Defaults
$toolsPath = Split-Path -Parent $MyInvocation.MyCommand.Definition
$packageParameters = Get-PackageParameters

# Download and unzip consul
$package = @{
  PackageName   = 'consul'
  Url           = 'https://releases.hashicorp.com/consul/1.20.0/consul_1.20.0_windows_386.zip'
  Url64bit      = 'https://releases.hashicorp.com/consul/1.20.0/consul_1.20.0_windows_amd64.zip'
  UnzipLocation = $toolsPath
  Checksum      = 'c450a44852c39091f8df2f20b26798883cb8f3c0badf44b6185c5810a0f38bef'
  Checksum64    = '96249ae33372a76aed411afba52c1f228a102f8b9d72eae2a341c732856afacc'
  ChecksumType  = 'sha256'
}
Install-ChocolateyZipPackage @package

# Install Env CONSUL_HTTP_ADDR
if ($packageParameters["apiaddr"] -ne "") {
  Install-ChocolateyEnvironmentVariable "CONSUL_HTTP_ADDR" $packageParameters["apiaddr"]
}

# Default to install with Windows service
if (-not ($packageParameters["noservice"])) {
  $serviceName = "consul"
  $wrapperExe = "$env:ChocolateyInstall\bin\nssm.exe"
  $serviceInstallationDirectory = "$env:PROGRAMDATA\consul"
  $serviceLogDirectory = "$serviceInstallationDirectory\logs"
  $serviceConfigDirectory = "$serviceInstallationDirectory\config"
  $serviceDataDirectory = "$serviceInstallationDirectory\data"

  # Create Service Directories
  Write-Host "Creating $serviceLogDirectory"
  New-Item -ItemType directory -Path "$serviceLogDirectory" -ErrorAction SilentlyContinue | Out-Null
  Write-Host "Creating $serviceConfigDirectory"
  New-Item -ItemType directory -Path "$serviceConfigDirectory" -ErrorAction SilentlyContinue | Out-Null

  # Create event log source
  # User -Force to avoid "A key at this path already exists" exception. Overwrite not an issue since key is not further modified
  $registryPath = 'HKLM:\SYSTEM\CurrentControlSet\services\eventlog\Application'
  New-Item -Path $registryPath -Name consul -Force | Out-Null
  # Set EventMessageFile value
  Set-ItemProperty $registryPath\consul EventMessageFile "C:\Windows\Microsoft.NET\Framework64\v2.0.50727\EventLogMessages.dll" | Out-Null

  # Set up task scheduler for log rotation
  $logrotate = ('%SYSTEMROOT%\System32\forfiles.exe /p \"{0}\" /s /m *.* /c \"cmd /c Del @path\" /d -7' -f "$serviceLogDirectory")
  SchTasks.exe /Create /SC DAILY /TN ""ConsulLogrotate"" /TR ""$($logrotate)"" /ST 09:00 /F | Out-Null

  # Set up task scheduler for log rotation. Only works for Powershell 4 or Server 2012R2 so this block can replace
  # using SchTasks.exe for registering services once machines have retired the older version of PS or upgraded to 2012R2
  #$command = ('$now = Get-Date; dir "{0}" | where {{$_.LastWriteTime -le $now.AddDays(-7)}} | del -whatif' -f $serviceLogDirectory)
  #$action = New-ScheduledTaskAction -Execute 'Powershell.exe' -Argument "-NoProfile -WindowStyle Hidden -command $($command)"
  #$trigger = New-ScheduledTaskTrigger -Daily -At 9am
  #Register-ScheduledTask -Action $action -Trigger $trigger -TaskName "ConsulLogrotate" -Description "Log rotation for consul"

  #Uninstall service if it already exists. Stops the service first if it's running
  $service = Get-Service $serviceName -ErrorAction SilentlyContinue
  if ($service) {
    Write-Host "Uninstalling existing service"
    if ($service.Status -ne "Stopped" -and $service.Status -ne "Stopping") {
      Write-Host "Stopping consul process ..."
      $service.Stop();
    }

    $service.WaitForStatus("Stopped", (New-TimeSpan -Minutes 1));
    if ($service.Status -ne "Stopped") {
      throw "$serviceName could not be stopped within the allotted timespan.  Stop the service and try again."
    }

    $service = Get-WmiObject -Class Win32_Service -Filter "Name='$serviceName'"
    $service.delete() | Out-Null
  }

  $serviceArgs = $packageParameters["agentargs"]
  $serviceArgs = "agent -ui -config-dir=$serviceConfigDirectory -data-dir=$serviceDataDirectory $serviceArgs"
  Write-Host "Installing service: $serviceName"
  # Install the service
  & $wrapperExe install $serviceName $(Join-Path $toolsPath "consul.exe") $serviceArgs | Out-Null
  & $wrapperExe set $serviceName AppEnvironmentExtra GOMAXPROCS=$env:NUMBER_OF_PROCESSORS | Out-Null
  & $wrapperExe set $serviceName ObjectName NetworkService | Out-Null
  & $wrapperExe set $serviceName AppStdout "$serviceLogDirectory\consul-output.log" | Out-Null
  & $wrapperExe set $serviceName AppStderr "$serviceLogDirectory\consul-error.log" | Out-Null
  & $wrapperExe set $serviceName AppRotateBytes 10485760 | Out-Null
  & $wrapperExe set $serviceName AppRotateFiles 1 | Out-Null
  & $wrapperExe set $serviceName AppRotateOnline 1 | Out-Null

  Write-Verbose "Service installed"

  # When nssm fully supports Rotate/Post Event hooks
  # $command = ('$now = Get-Date; dir "{0}" | where {{$_.LastWriteTime -le $now.AddDays(-7)}} | del -whatif' -f $serviceLogDirectory)
  # $action = ("Powershell.exe -NoProfile -WindowStyle Hidden -command '$({{0}})'" -f $command)
  # & $wrapperExe set consul AppEvents "Rotate/Post" $action | Out-Null

  # Restart service on failure natively via Windows sc. There is a memory leak if service restart is performed via NSSM
  # The NSSM configuration will set the default behavior of NSSM to stop the service if
  # consul fails (for example, unable to resolve cluster) and end the nssm.exe and consul.exe process.
  # The sc configuration will set Recovery under the Consul service properties such that a new instance will be started on failure,
  # spawning new nssm.exe and consul.exe processes. In short, nothing changed from a functionality perspective (the service will
  # still attempt to restart on failure) but this method kills the nssm.exe process thus avoiding memory hog.
  & $wrapperExe set $serviceName AppExit Default Exit | Out-Null
  Write-Verbose "sc failure"
  cmd.exe /c "sc failure $serviceName reset= 0 actions= restart/60000" | Out-Null

  Write-Verbose "Stop service"
  # Let this call to Get-Service throw if the service does not exist
  $service = Get-Service $serviceName
  if ($service.Status -ne "Stopped" -and $service.Status -ne "Stopping") {
    $service.Stop()
  }

  Write-Verbose "Wait for service to stop"
  $service.WaitForStatus("Stopped", (New-TimeSpan -Minutes 1));

  Write-Verbose "Start service"
  Start-Service $serviceName

  Write-Host "Installed service: $serviceName"
}

tools\chocolateyUninstall.ps1

if (Test-Path env:CONSUL_HTTP_ADDR) {
	Uninstall-ChocolateyEnvironmentVariable "CONSUL_HTTP_ADDR"
}

$service = Get-Service "consul" -ErrorAction SilentlyContinue

if ($service) {
	if ($service.Status -eq "Running") {
		Write-Host "Stopping consul process ..."
		net stop consul | Out-Null
	}

	$service = Get-WmiObject -Class Win32_Service -Filter "Name='consul'"
	$service.delete() | Out-Null
	
	SchTasks.exe /Delete /F /TN "ConsulLogrotate" 2>&1 | Out-Null

	Write-Host "Removing C:\ProgramData\consul\ ..."
	takeown /f "C:\ProgramData\consul\" /a /r /d Y | Out-Null
	icacls "C:\ProgramData\consul" /grant administrators:F /t | Out-Null
	Remove-Item -Path "C:\ProgramData\consul\" -Force -Recurse -ErrorAction SilentlyContinue | Out-Null
}

tools\LICENSE.txt

Mozilla Public License, version 2.0

1. Definitions

1.1. “Contributor”

     means each individual or legal entity that creates, contributes to the
     creation of, or owns Covered Software.

1.2. “Contributor Version”

     means the combination of the Contributions of others (if any) used by a
     Contributor and that particular Contributor’s Contribution.

1.3. “Contribution”

     means Covered Software of a particular Contributor.

1.4. “Covered Software”

     means Source Code Form to which the initial Contributor has attached the
     notice in Exhibit A, the Executable Form of such Source Code Form, and
     Modifications of such Source Code Form, in each case including portions
     thereof.

1.5. “Incompatible With Secondary Licenses”
     means

     a. that the initial Contributor has attached the notice described in
        Exhibit B to the Covered Software; or

     b. that the Covered Software was made available under the terms of version
        1.1 or earlier of the License, but not also under the terms of a
        Secondary License.

1.6. “Executable Form”

     means any form of the work other than Source Code Form.

1.7. “Larger Work”

     means a work that combines Covered Software with other material, in a separate
     file or files, that is not Covered Software.

1.8. “License”

     means this document.

1.9. “Licensable”

     means having the right to grant, to the maximum extent possible, whether at the
     time of the initial grant or subsequently, any and all of the rights conveyed by
     this License.

1.10. “Modifications”

     means any of the following:

     a. any file in Source Code Form that results from an addition to, deletion
        from, or modification of the contents of Covered Software; or

     b. any new file in Source Code Form that contains any Covered Software.

1.11. “Patent Claims” of a Contributor

      means any patent claim(s), including without limitation, method, process,
      and apparatus claims, in any patent Licensable by such Contributor that
      would be infringed, but for the grant of the License, by the making,
      using, selling, offering for sale, having made, import, or transfer of
      either its Contributions or its Contributor Version.

1.12. “Secondary License”

      means either the GNU General Public License, Version 2.0, the GNU Lesser
      General Public License, Version 2.1, the GNU Affero General Public
      License, Version 3.0, or any later versions of those licenses.

1.13. “Source Code Form”

      means the form of the work preferred for making modifications.

1.14. “You” (or “Your”)

      means an individual or a legal entity exercising rights under this
      License. For legal entities, “You” includes any entity that controls, is
      controlled by, or is under common control with You. For purposes of this
      definition, “control” means (a) the power, direct or indirect, to cause
      the direction or management of such entity, whether by contract or
      otherwise, or (b) ownership of more than fifty percent (50%) of the
      outstanding shares or beneficial ownership of such entity.


2. License Grants and Conditions

2.1. Grants

     Each Contributor hereby grants You a world-wide, royalty-free,
     non-exclusive license:

     a. under intellectual property rights (other than patent or trademark)
        Licensable by such Contributor to use, reproduce, make available,
        modify, display, perform, distribute, and otherwise exploit its
        Contributions, either on an unmodified basis, with Modifications, or as
        part of a Larger Work; and

     b. under Patent Claims of such Contributor to make, use, sell, offer for
        sale, have made, import, and otherwise transfer either its Contributions
        or its Contributor Version.

2.2. Effective Date

     The licenses granted in Section 2.1 with respect to any Contribution become
     effective for each Contribution on the date the Contributor first distributes
     such Contribution.

2.3. Limitations on Grant Scope

     The licenses granted in this Section 2 are the only rights granted under this
     License. No additional rights or licenses will be implied from the distribution
     or licensing of Covered Software under this License. Notwithstanding Section
     2.1(b) above, no patent license is granted by a Contributor:

     a. for any code that a Contributor has removed from Covered Software; or

     b. for infringements caused by: (i) Your and any other third party’s
        modifications of Covered Software, or (ii) the combination of its
        Contributions with other software (except as part of its Contributor
        Version); or

     c. under Patent Claims infringed by Covered Software in the absence of its
        Contributions.

     This License does not grant any rights in the trademarks, service marks, or
     logos of any Contributor (except as may be necessary to comply with the
     notice requirements in Section 3.4).

2.4. Subsequent Licenses

     No Contributor makes additional grants as a result of Your choice to
     distribute the Covered Software under a subsequent version of this License
     (see Section 10.2) or under the terms of a Secondary License (if permitted
     under the terms of Section 3.3).

2.5. Representation

     Each Contributor represents that the Contributor believes its Contributions
     are its original creation(s) or it has sufficient rights to grant the
     rights to its Contributions conveyed by this License.

2.6. Fair Use

     This License is not intended to limit any rights You have under applicable
     copyright doctrines of fair use, fair dealing, or other equivalents.

2.7. Conditions

     Sections 3.1, 3.2, 3.3, and 3.4 are conditions of the licenses granted in
     Section 2.1.


3. Responsibilities

3.1. Distribution of Source Form

     All distribution of Covered Software in Source Code Form, including any
     Modifications that You create or to which You contribute, must be under the
     terms of this License. You must inform recipients that the Source Code Form
     of the Covered Software is governed by the terms of this License, and how
     they can obtain a copy of this License. You may not attempt to alter or
     restrict the recipients’ rights in the Source Code Form.

3.2. Distribution of Executable Form

     If You distribute Covered Software in Executable Form then:

     a. such Covered Software must also be made available in Source Code Form,
        as described in Section 3.1, and You must inform recipients of the
        Executable Form how they can obtain a copy of such Source Code Form by
        reasonable means in a timely manner, at a charge no more than the cost
        of distribution to the recipient; and

     b. You may distribute such Executable Form under the terms of this License,
        or sublicense it under different terms, provided that the license for
        the Executable Form does not attempt to limit or alter the recipients’
        rights in the Source Code Form under this License.

3.3. Distribution of a Larger Work

     You may create and distribute a Larger Work under terms of Your choice,
     provided that You also comply with the requirements of this License for the
     Covered Software. If the Larger Work is a combination of Covered Software
     with a work governed by one or more Secondary Licenses, and the Covered
     Software is not Incompatible With Secondary Licenses, this License permits
     You to additionally distribute such Covered Software under the terms of
     such Secondary License(s), so that the recipient of the Larger Work may, at
     their option, further distribute the Covered Software under the terms of
     either this License or such Secondary License(s).

3.4. Notices

     You may not remove or alter the substance of any license notices (including
     copyright notices, patent notices, disclaimers of warranty, or limitations
     of liability) contained within the Source Code Form of the Covered
     Software, except that You may alter any license notices to the extent
     required to remedy known factual inaccuracies.

3.5. Application of Additional Terms

     You may choose to offer, and to charge a fee for, warranty, support,
     indemnity or liability obligations to one or more recipients of Covered
     Software. However, You may do so only on Your own behalf, and not on behalf
     of any Contributor. You must make it absolutely clear that any such
     warranty, support, indemnity, or liability obligation is offered by You
     alone, and You hereby agree to indemnify every Contributor for any
     liability incurred by such Contributor as a result of warranty, support,
     indemnity or liability terms You offer. You may include additional
     disclaimers of warranty and limitations of liability specific to any
     jurisdiction.

4. Inability to Comply Due to Statute or Regulation

   If it is impossible for You to comply with any of the terms of this License
   with respect to some or all of the Covered Software due to statute, judicial
   order, or regulation then You must: (a) comply with the terms of this License
   to the maximum extent possible; and (b) describe the limitations and the code
   they affect. Such description must be placed in a text file included with all
   distributions of the Covered Software under this License. Except to the
   extent prohibited by statute or regulation, such description must be
   sufficiently detailed for a recipient of ordinary skill to be able to
   understand it.

5. Termination

5.1. The rights granted under this License will terminate automatically if You
     fail to comply with any of its terms. However, if You become compliant,
     then the rights granted under this License from a particular Contributor
     are reinstated (a) provisionally, unless and until such Contributor
     explicitly and finally terminates Your grants, and (b) on an ongoing basis,
     if such Contributor fails to notify You of the non-compliance by some
     reasonable means prior to 60 days after You have come back into compliance.
     Moreover, Your grants from a particular Contributor are reinstated on an
     ongoing basis if such Contributor notifies You of the non-compliance by
     some reasonable means, this is the first time You have received notice of
     non-compliance with this License from such Contributor, and You become
     compliant prior to 30 days after Your receipt of the notice.

5.2. If You initiate litigation against any entity by asserting a patent
     infringement claim (excluding declaratory judgment actions, counter-claims,
     and cross-claims) alleging that a Contributor Version directly or
     indirectly infringes any patent, then the rights granted to You by any and
     all Contributors for the Covered Software under Section 2.1 of this License
     shall terminate.

5.3. In the event of termination under Sections 5.1 or 5.2 above, all end user
     license agreements (excluding distributors and resellers) which have been
     validly granted by You or Your distributors under this License prior to
     termination shall survive termination.

6. Disclaimer of Warranty

   Covered Software is provided under this License on an “as is” basis, without
   warranty of any kind, either expressed, implied, or statutory, including,
   without limitation, warranties that the Covered Software is free of defects,
   merchantable, fit for a particular purpose or non-infringing. The entire
   risk as to the quality and performance of the Covered Software is with You.
   Should any Covered Software prove defective in any respect, You (not any
   Contributor) assume the cost of any necessary servicing, repair, or
   correction. This disclaimer of warranty constitutes an essential part of this
   License. No use of  any Covered Software is authorized under this License
   except under this disclaimer.

7. Limitation of Liability

   Under no circumstances and under no legal theory, whether tort (including
   negligence), contract, or otherwise, shall any Contributor, or anyone who
   distributes Covered Software as permitted above, be liable to You for any
   direct, indirect, special, incidental, or consequential damages of any
   character including, without limitation, damages for lost profits, loss of
   goodwill, work stoppage, computer failure or malfunction, or any and all
   other commercial damages or losses, even if such party shall have been
   informed of the possibility of such damages. This limitation of liability
   shall not apply to liability for death or personal injury resulting from such
   party’s negligence to the extent applicable law prohibits such limitation.
   Some jurisdictions do not allow the exclusion or limitation of incidental or
   consequential damages, so this exclusion and limitation may not apply to You.

8. Litigation

   Any litigation relating to this License may be brought only in the courts of
   a jurisdiction where the defendant maintains its principal place of business
   and such litigation shall be governed by laws of that jurisdiction, without
   reference to its conflict-of-law provisions. Nothing in this Section shall
   prevent a party’s ability to bring cross-claims or counter-claims.

9. Miscellaneous

   This License represents the complete agreement concerning the subject matter
   hereof. If any provision of this License is held to be unenforceable, such
   provision shall be reformed only to the extent necessary to make it
   enforceable. Any law or regulation which provides that the language of a
   contract shall be construed against the drafter shall not be used to construe
   this License against a Contributor.


10. Versions of the License

10.1. New Versions

      Mozilla Foundation is the license steward. Except as provided in Section
      10.3, no one other than the license steward has the right to modify or
      publish new versions of this License. Each version will be given a
      distinguishing version number.

10.2. Effect of New Versions

      You may distribute the Covered Software under the terms of the version of
      the License under which You originally received the Covered Software, or
      under the terms of any subsequent version published by the license
      steward.

10.3. Modified Versions

      If you create software not governed by this License, and you want to
      create a new license for such software, you may create and use a modified
      version of this License if you rename the license and remove any
      references to the name of the license steward (except to note that such
      modified license differs from this License).

10.4. Distributing Source Code Form that is Incompatible With Secondary Licenses
      If You choose to distribute Source Code Form that is Incompatible With
      Secondary Licenses under the terms of this version of the License, the
      notice described in Exhibit B of this License must be attached.

Exhibit A - Source Code Form License Notice

      This Source Code Form is subject to the
      terms of the Mozilla Public License, v.
      2.0. If a copy of the MPL was not
      distributed with this file, You can
      obtain one at
      http://mozilla.org/MPL/2.0/.

If it is not possible or desirable to put the notice in a particular file, then
You may include the notice in a location (such as a LICENSE file in a relevant
directory) where a recipient would be likely to look for such a notice.

You may add additional accurate notices of copyright ownership.

Exhibit B - “Incompatible With Secondary Licenses” Notice

      This Source Code Form is “Incompatible
      With Secondary Licenses”, as defined by
      the Mozilla Public License, v. 2.0.

tools\VERIFICATION.txt

VERIFICATION
 
Verification is intended to assist the Chocolatey moderators and community
in verifying that this package's contents are trustworthy.
 
Package can be verified like this:
 
1. Go to
 
   x32: https://www.consul.io/downloads.html
   x64: https://www.consul.io/downloads.html
 
   to download the installer.
 
2. You can use one of the following methods to obtain the SHA256 checksum:
   - Use powershell function 'Get-FileHash'
   - Use Chocolatey utility 'checksum.exe'

   checksum type: sha256
 
File 'License.txt' is obtained from:
    https://github.com/hashicorp/consul/blob/master/LICENSE
 
File 'consul.exe' is obtained from:
    https://www.consul.io/downloads.html

Virus Scan Results

consul.1.20.0.nupkg (93a00a04defa) - ## / 67
consul_1.20.0_windows_amd64.zip (96249ae33372) - ## / 64
consul_1.20.0_windows_386.zip (c450a44852c3) - ## / 62

In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).

Chocolatey Pro provides runtime protection from possible malware.

Version History

Version	Downloads	Last Updated	Status
Consul 1.20.1	288	Thursday, October 31, 2024	Approved
Consul 1.20.0	227	Wednesday, October 16, 2024	Approved
Consul 1.19.2	610	Monday, September 2, 2024	Approved
Consul 1.19.1	788	Friday, July 12, 2024	Approved
Consul 1.19.0	448	Thursday, June 13, 2024	Approved
Consul 1.18.2	444	Saturday, May 18, 2024	Approved
Consul 1.18.1	685	Wednesday, March 27, 2024	Approved
Consul 1.18.0	384	Tuesday, February 27, 2024	Approved
Consul 1.17.3	227	Sunday, February 18, 2024	Approved
Consul 1.17.2	407	Wednesday, January 24, 2024	Approved
Consul 1.17.1	584	Saturday, December 16, 2023	Approved
Consul 1.17.0	681	Saturday, November 4, 2023	Approved
Consul 1.16.3	170	Wednesday, November 1, 2023	Approved
Consul 1.16.2	678	Wednesday, September 20, 2023	Approved
Consul 1.16.1	862	Wednesday, August 9, 2023	Approved
Consul 1.16.0	552	Tuesday, June 27, 2023	Approved
Consul 1.15.3	403	Friday, June 2, 2023	Approved
Consul 1.15.2	1026	Sunday, April 2, 2023	Approved
Consul 1.15.1	642	Wednesday, March 8, 2023	Approved
Consul 1.15.0	357	Saturday, February 25, 2023	Approved
Consul 1.14.4	4648	Thursday, February 23, 2023	Approved
Consul 1.9.0	17629	Tuesday, January 5, 2021	Approved
Consul 1.8.7	2223	Monday, December 28, 2020	Approved
Consul 1.8.6	176	Monday, December 28, 2020	Approved
Consul 1.8.5	1122	Thursday, November 5, 2020	Approved
Consul 1.8.4	692	Wednesday, November 4, 2020	Approved
Consul 1.8.3	197	Wednesday, November 4, 2020	Approved
Consul 1.8.2	207	Tuesday, November 3, 2020	Approved
Consul 1.8.1	242	Thursday, October 29, 2020	Approved
Consul 1.8.0	2554	Tuesday, August 11, 2020	Approved
Consul 1.7.5	236	Tuesday, August 11, 2020	Approved
Consul 1.7.4	367	Saturday, August 8, 2020	Approved
Consul 1.7.3	216	Saturday, August 8, 2020	Approved
Consul 1.7.2	3414	Wednesday, June 17, 2020	Approved
Consul 1.7.1	228	Wednesday, June 17, 2020	Approved
Consul 1.7.0	266	Tuesday, June 16, 2020	Approved
Consul 1.6.10	351	Sunday, December 27, 2020	Approved
Consul 1.6.9	189	Sunday, December 27, 2020	Approved
Consul 1.6.8	147	Sunday, December 27, 2020	Approved
Consul 1.6.7	153	Saturday, December 26, 2020	Approved
Consul 1.6.6	265	Tuesday, June 16, 2020	Approved
Consul 1.6.5	1845	Friday, April 17, 2020	Approved
Consul 1.6.4	486	Friday, April 17, 2020	Approved
Consul 1.6.3	288	Wednesday, April 15, 2020	Approved
Consul 1.6.2	375	Thursday, April 9, 2020	Approved
Consul 1.6.1	12858	Friday, October 4, 2019	Approved
Consul 1.6.0	418	Friday, October 4, 2019	Approved
Consul 1.5.3	321	Friday, October 4, 2019	Approved
Consul 1.5.2	3746	Monday, July 8, 2019	Approved
Consul 1.5.1	2024	Monday, June 24, 2019	Approved
Consul 1.5.0	361	Monday, June 24, 2019	Approved
Consul 1.4.5	420	Monday, June 24, 2019	Approved
Consul 1.4.4	390	Monday, June 24, 2019	Approved
Consul 1.4.3	2344	Wednesday, March 6, 2019	Approved
Consul 1.4.2	615	Wednesday, March 6, 2019	Approved
Consul 1.4.1	286	Tuesday, March 5, 2019	Approved
Consul 1.4.0	1776	Tuesday, December 11, 2018	Approved
Consul 1.3.1	457	Monday, December 10, 2018	Approved
Consul 1.3.0	867	Saturday, November 10, 2018	Approved
Consul 1.2.3	2813	Friday, October 12, 2018	Approved
Consul 1.2.2	4273	Thursday, August 2, 2018	Approved
Consul 1.2.1	801	Monday, July 16, 2018	Approved
Consul 1.2.0	732	Wednesday, June 27, 2018	Approved
Consul 1.1.0	1082	Monday, June 4, 2018	Approved
Consul 1.0.7	1492	Monday, April 23, 2018	Approved
Consul 1.0.6	465	Friday, April 20, 2018	Approved
Consul 1.0.5	342	Friday, April 20, 2018	Approved
Consul 1.0.3	6465	Friday, January 26, 2018	Approved
Consul 1.0.2	553	Wednesday, January 24, 2018	Approved
Consul 1.0.1	412	Wednesday, January 24, 2018	Approved
Consul 1.0.0	5443	Monday, October 23, 2017	Approved
Consul 0.9.3	10036	Saturday, September 16, 2017	Approved
Consul 0.9.2	476	Saturday, September 16, 2017	Approved
Consul 0.9.1	383	Saturday, September 16, 2017	Approved
Consul 0.9.0	1416	Wednesday, July 26, 2017	Approved
Consul 0.8.5	4009	Friday, June 30, 2017	Approved
Consul 0.8.4	529	Friday, June 30, 2017	Approved
Consul 0.8.3	513	Friday, June 30, 2017	Approved
Consul 0.8.2	458	Friday, June 30, 2017	Approved
Consul 0.8.1	532	Friday, June 30, 2017	Approved
Consul 0.8.0	4146	Monday, April 10, 2017	Approved
Consul 0.7.5	11830	Tuesday, February 21, 2017	Approved
Consul 0.7.4.1	480	Thursday, February 16, 2017	Approved
Consul 0.7.4	445	Wednesday, February 15, 2017	Approved
Consul 0.7.3	560	Wednesday, February 15, 2017	Approved
Consul 0.7.2	1495	Monday, January 2, 2017	Approved
Consul 0.7.1	562	Friday, December 30, 2016	Approved
Consul 0.7.0	3878	Monday, September 19, 2016	Approved
Consul 0.6.4	5303	Wednesday, April 20, 2016	Approved
Consul 0.6.3.2	663	Monday, March 7, 2016	Approved
Consul 0.6.3.1	527	Thursday, February 25, 2016	Approved
Consul 0.6.3	866	Friday, January 22, 2016	Approved
Consul 0.5.2	9214	Wednesday, October 14, 2015	Approved
Consul 0.5.0	20995	Monday, June 1, 2015	Approved
consul 0.4.1	701	Friday, October 31, 2014	Approved
consul 0.3.1	544	Wednesday, August 13, 2014	Approved

HashiCorp 2019

Release Notes

1.20.0 (October 14, 2024)

SECURITY:

Explicitly set 'Content-Type' header to mitigate XSS vulnerability. [GH-21704]
Implement HTML sanitization for user-generated content to prevent XSS attacks in the UI. [GH-21711]
UI: Remove codemirror linting due to package dependency [GH-21726]
Upgrade Go to use 1.22.7. This addresses CVE
CVE-2024-34155 [GH-21705]
Upgrade to support aws/aws-sdk-go v1.55.5 or higher. This resolves CVEs
CVE-2020-8911 and
CVE-2020-8912. [GH-21684]
ui: Pin a newer resolution of Braces [GH-21710]
ui: Pin a newer resolution of Codemirror [GH-21715]
ui: Pin a newer resolution of Markdown-it [GH-21717]
ui: Pin a newer resolution of ansi-html [GH-21735]

FEATURES:

grafana: added the dashboards service-to-service dashboard, service dashboard, and consul dataplane dashboard [GH-21806]
server: remove v2 tenancy, catalog, and mesh experiments [GH-21592]

IMPROVEMENTS:

security: upgrade ubi base image to 9.4 [GH-21750]
connect: Add Envoy 1.31 and 1.30 to support matrix [GH-21616]

BUG FIXES:

jwt-provider: change dns lookup family from the default of AUTO which would prefer ipv6 to ALL if LOGICAL_DNS is used or PREFER_IPV4 if STRICT_DNS is used to gracefully handle transitions to ipv6. [GH-21703]

Dependencies

- NSSM (≥ 2.24.0)

Discussion for the Consul Package

Ground Rules:

This discussion is only about Consul and the Consul package. If you have feedback for Chocolatey, please contact the Google Group.
This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
Tell us what you love about the package or Consul, or tell us what needs improvement.
Share your experiences with the package, or extra configuration or gotchas that you've found.
If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.

Resources

Events

Courses

181,364

227

16 Oct 2024

Consul

Consul 1.20.0

All Checks are Passing

Deployment Method: Individual Install, Upgrade, & Uninstall

Deployment Method:

1. Enter Your Internal Repository Url

2. Setup Your Environment

1. Ensure you are set for organizational deployment

2. Get the package into your environment

3. Copy Your Script

4. If applicable - Chocolatey configuration/installation

Package Parameters

1.20.0 (October 14, 2024)

Ground Rules: