Step 1: Review Your Packages

Step 2: Choose Your Integration Method

Step 3: Copy Your Script or Download Config

Option 1: Copy Script

Option 2: Download Config

Step 4: Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the packages and push them to a repository
  Download Packages

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the packages:
  Download Packages
- Follow manual internalization instructions
Package Internalizer (C4B)
- Run: (additional options)
- For package and dependencies run:
- Automate package internalization

Step 5: Copy Your Script

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###

#### We initialize a few things that are needed by this script - there are no other requirements.
$ErrorActionPreference = "Stop"

#### Set TLS 1.2 (3072) as that is the minimum required by various up-to-date repositories.
#### Use integers because the enumeration value for TLS 1.2 won't exist
#### in .NET 4.0, even though they are addressable if .NET 4.5+ is
#### installed (.NET 4.5 is an in-place upgrade).
[System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072

#### We use this variable for future REST calls.
$RequestArguments = @{
    UseBasicParsing = $true
}

## 2. TOP LEVEL VARIABLES ##

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# $NugetRepositoryCredential = [PSCredential]::new(
#     "username",
#     ("password" | ConvertTo-SecureString -AsPlainText -Force)
# )
# $RequestArguments.Credential = $NugetRepositoryCredential

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it
$ChocolateyDownloadUrl = "$($NugetRepositoryUrl.TrimEnd('/'))/package/chocolatey.2.4.0.nupkg"

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# $ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

#### Download the Nupkg, appending .zip to the filename to handle archive cmdlet limitations
if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    $TempDirectory = Join-Path $env:Temp "chocolateyInstall"
    if (-not (Test-Path $TempDirectory -PathType Container)) {
        $null = New-Item -Path $TempDirectory -ItemType Directory
    }
    $DownloadedNupkg = Join-Path $TempDirectory "$(Split-Path $ChocolateyDownloadUrl -Leaf).zip"
    Invoke-WebRequest -Uri $ChocolateyDownloadUrl -OutFile $DownloadedNupkg @RequestArguments

    #### Extract the Nupkg, and run the chocolateyInstall script
    if (Get-Command Microsoft.PowerShell.Archive\Expand-Archive -ErrorAction SilentlyContinue) {
        Microsoft.PowerShell.Archive\Expand-Archive -Path $DownloadedNupkg -DestinationPath $TempDirectory -Force
    } else {
        # PowerShell versions <4.0 do not have this function available
        try {
            $shellApplication = New-Object -ComObject Shell.Application
            $zipPackage = $shellApplication.NameSpace($DownloadedNupkg)
            $destinationFolder = $shellApplication.NameSpace($TempDirectory)
            $destinationFolder.CopyHere($zipPackage.Items(), 0x10)
        } catch {
            Write-Warning "Unable to unzip package using built-in compression."
            throw $_
        }
    }

    & $(Join-Path $TempDirectory "tools\chocolateyInstall.ps1")
}

if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    refreshenv
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# choco feature enable -n useFipsCompliantChecksums

### b. Apply Recommended Configuration ###
#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
choco config set --name cacheLocation --value C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
choco config set --name commandExecutionTimeoutSeconds --value 14400

#### Turn off download progress when running choco through integrations
choco feature disable --name showDownloadProgress

### c. Sources ###
#### Remove the default community package repository source
choco source list --limitoutput | ConvertFrom-Csv -Header 'Name', 'Location' -Delimiter '|' | ForEach-Object {
    if ($_.Location -eq 'https://community.chocolatey.org/api/v2/') {
        choco source remove -n $_.Name
    }
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
if ($NugetRepositoryCredential) {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --user $NugetRepositoryCredential.UserName --password $NugetRepositoryCredential.GetNetworkCredential().Password --priority 1
} else {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --priority 1
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
choco upgrade chocolatey --confirm

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
choco install chocolatey-license --source $NugetRepositoryUrl --confirm

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco source disable --name chocolatey.licensed
} else {
    Write-Warning "Not disabling 'chocolatey.licensed' feed, as Chocolatey-License has not been installed."
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco install chocolatey.extension --source $NugetRepositoryUrl --confirm
} else {
    Write-Warning "Not installing 'chocolatey.extension', as Chocolatey-License has not been installed."
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
choco feature disable --name showNonElevatedWarnings
choco feature enable --name useBackgroundService
choco feature enable --name useBackgroundServiceWithNonAdministratorsOnly
choco feature enable --name allowBackgroundServiceUninstallsFromUserInstallsOnly
choco config set --name allowedBackgroundServiceCommands --value "install,upgrade,uninstall"

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if ($ChocolateyCentralManagementUrl) {
    choco install chocolatey-agent --source $NugetRepositoryUrl --confirm
    choco config set --name CentralManagementServiceUrl --value $ChocolateyCentralManagementUrl
    if ($ChocolateyCentralManagementClientSalt) {
        choco config set --name centralManagementClientCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementClientSalt
    }
    if ($ChocolateyCentralManagementServiceSalt) {
        choco config set --name centralManagementServiceCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementServiceSalt
    }
    choco feature enable --name useChocolateyCentralManagement
    choco feature enable --name useChocolateyCentralManagementDeployments
}

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. chocolatey.chocolatey
##### You will require the chocolatey.chocolatey collection to be installed
##### on all machines using this playbook.
##### Please see https://github.com/chocolatey/chocolatey-ansible/#installing-the-collection-from-ansible-galaxy

- name: Install and Configure Chocolatey
  hosts: all

## 2. TOP LEVEL VARIABLES ##
  vars:

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
    nuget_repository_url: INTERNAL REPO URL

### b. Internal Repository Credential ###
#### If required, add the repository access credential here and
#### uncomment lines with source_username and source_password below
#    nuget_repository_username: username
#    nuget_repository_password: password

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#    chocolatey_central_management_url: https://chocolatey-central-management:24020/ChocolateyManagementService

#### ii. If using a Client Salt, add it here
#    chocolatey_central_management_client_salt: clientsalt

#### iii. If using a Service Salt, add it here
#    chocolatey_central_management_service_salt: servicesalt

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

  tasks:
  - name: Install chocolatey
    win_chocolatey:
      name: chocolatey
      source: ""{{ nuget_repository_url }}""
      # source_username: ""{{ nuget_repository_username }}""
      # source_password: ""{{ nuget_repository_password }}""

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#   - name: Enable FIPS compliance
#     win_chocolatey_feature:
#       name: useFipsCompliantChecksums
#       state: enabled

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
  - name: Set the cache location
    win_chocolatey_config:
      name: cacheLocation
      state: present
      value: C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
  - name: Set the command execution timeout
    win_chocolatey_config:
      name: commandExecutionTimeoutSeconds
      state: present
      value: 14400

#### Turn off download progress when running choco through integrations
  - name: Disable showing download progress
    win_chocolatey_feature:
      name: showDownloadProgress
      state: disabled

### c. Sources ###
#### Remove the default community package repository source
  - name: Remove Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey
      state: absent

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here
#### NOTE: This EXAMPLE may require changes
  - name: Add Internal Repository
    win_chocolatey_source:
      name: ChocolateyInternal
      state: present
      source: {{ nuget_repository_url }}
      # source_username: {{ nuget_repository_username }}
      # source_password: {{ nuget_repository_password }}
      priority: 1

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
  - name: Upgrade Chocolatey
    win_chocolatey:
      name: chocolatey
      state: latest

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.
### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
  - name: Install Chocolatey License
    win_chocolatey:
      name: chocolatey-license
      source: ChocolateyInternal
      state: latest

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
  - name: Disable Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey.licensed
      state: disabled

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
  - name: Install Chocolatey Extension
    win_chocolatey:
      name: chocolatey.extension
      source: ChocolateyInternal
      state: latest

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
  - name: Hide not-elevated warnings
    win_chocolatey_feature:
      name: showNonElevatedWarnings
      state: disabled

  - name: Use background mode for self-service
    win_chocolatey_feature:
      name: useBackgroundService
      state: enabled

  - name: Use background service for non-admins
    win_chocolatey_feature:
      name: useBackgroundServiceWithNonAdministratorsOnly
      state: enabled

  - name: Allow background uninstallation for user installs
    win_chocolatey_feature:
      name: allowBackgroundServiceUninstallsFromUserInstallsOnly
      state: enabled

  - name: Set allowed background service commands
    win_chocolatey_config:
      name: backgroundServiceAllowedCommands
      state: present
      value: install,upgrade,uninstall

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
  - name: Install Chocolatey Agent
    when: chocolatey_central_management_url is defined
    win_chocolatey:
      name: chocolatey-agent
      source: ChocolateyInternal
      state: latest

  - name: Set the Central Management Service URL
    when: chocolatey_central_management_url is defined
    win_chocolatey_config:
      name: CentralManagementServiceUrl
      state: present
      value: {{ chocolatey_central_management_url }}

  - name: Set the Central Management Client Salt
    when: chocolatey_central_management_client_salt is defined
    win_chocolatey_config:
      name: centralManagementClientCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_client_salt }}

  - name: Set the Central Management Service Salt
    when: chocolatey_central_management_service_salt is defined
    win_chocolatey_config:
      name: centralManagementServiceCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_service_salt }}

  - name: Use Central Management
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagement
      state: enabled

  - name: Use Central Management Deployments
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagementDeployments
      state: enabled

See docs at https://docs.chef.io/resource_chocolatey_package.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### The Chocolatey resources are available with any recent version of Chef.
#### We utilise the Chocolatey recipe to install the Chocolatey binaries.
include_recipe "chocolatey"

## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# NugetRepositoryUsername = "username"
# NugetRepositoryPassword = "password"

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
ChocolateyNupkgUrl = "INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg",

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
node['chocolatey']['install vars'] = {
  'chocolateyDownloadUrl' => "#{ChocolateyNupkgUrl}",
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# chocolatey_feature 'useFipsCompliantChecksums' do
#   action :enable
# end

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolatey_config 'cacheLocation' do
  value 'C:\ProgramData\chocolatey\cache'
end

#### Increase timeout to at least 4 hours
chocolatey_config 'commandExecutionTimeoutSeconds' do
  value '14400'
end

#### Turn off download progress when running choco through integrations
chocolatey_feature 'showDownloadProgress' do
  action :disable
end

### c. Sources ###
#### Remove the default community package repository source
chocolatey_source 'chocolatey' do
  action :remove
end

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
chocolatey_source 'ChocolateyInternal' do
  source "#{NugetRepositoryUrl}"
  priority 1
  action   :add
end

execute 'ChocolateyInternal' do
  command "choco source add --name ChocolateyInternal -s #{NugetRepositoryUrl} -u=#{NugetRepositoryUsername} -p=#{NugetRepositoryPassword} --priority=1"
  only_if { NugetRepositoryUsername != nil || NugetRepositoryPassword != nil }
end

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
chocolatey_package 'chocolatey' do
  action :upgrade
  source "#{NugetRepositoryUrl}"
end

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
chocolatey_package 'chocolatey-license' do
  action :install
  source "#{NugetRepositoryUrl}"
end

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
chocolatey_source 'chocolatey.licensed' do
  action            :disable
end

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
chocolatey_package 'chocolatey.extention' do
  action     install
  source     "#{NugetRepositoryUrl}"
end

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolatey_feature 'showNonElevatedWarnings' do
  action :disable
end

chocolatey_feature 'useBackgroundService' do
  action :enable
end

chocolatey_feature 'useBackgroundServiceWithNonAdministratorsOnly' do
  action :enable
end

chocolatey_feature 'allowBackgroundServiceUninstallsFromUserInstallsOnly' do
  action :enable
end

chocolatey_config 'backgroundServiceAllowedCommands' do
  value 'install,upgrade,uninstall'
end

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
chocolatey_package 'chocolatey-agent' do
  action     install
  source     "#{NugetRepositoryUrl}"
  # user       "#{NugetRepositoryUsername}"
  # password   "#{NugetRepositoryPassword}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'CentralManagementServiceUrl' do
  value  "#{ChocolateyCentralManagementUrl}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'centralManagementClientCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementClientSalt}"
  only_if { ChocolateyCentralManagementClientSalt != nil }
end

chocolatey_config 'centralManagementServiceCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementServiceSalt}"
  only_if { ChocolateyCentralManagementServiceSalt != nil }
end

chocolatey_feature 'useChocolateyCentralManagement' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_feature 'useChocolateyCentralManagementDeployments' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.

If Applicable - Chocolatey Configuration/Installation


#requires -Modules cChoco
## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires chocolatey\cChoco DSC module to be installed on the machine compiling the DSC manifest
#### NOTE: This will need to be installed before running the DSC portion of this script
if (-not (Get-Module cChoco -ListAvailable)) {
    $null = Install-PackageProvider -Name NuGet -MinimumVersion 2.8.5.201 -Force
    if (($PSGallery = Get-PSRepository -Name PSGallery).InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy Trusted
    }
    Install-Module -Name cChoco
    if ($PSGallery.InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy $PSGallery.InstallationPolicy
    }
}

#### ii. Requires a hosted copy of the install.ps1 script
##### This should be available to download without authentication.
##### The original script can be found here: https://community.chocolatey.org/install.ps1

Configuration ChocolateyConfig {
## 2. TOP LEVEL VARIABLES ##
    param(
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
        $NugetRepositoryUrl      = "INTERNAL REPO URL",

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
        $ChocolateyNupkgUrl      = "INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg",

### c. Internal Repository Credential ###
#### If required, add the repository access credential here
#        $NugetRepositoryCredential = [PSCredential]::new(
#            "username",
#            ("password" | ConvertTo-SecureString -AsPlainText -Force)
#        ),

### d. Install.ps1 URL
#### The path to the hosted install script:
        $ChocolateyInstallPs1Url = "https://community.chocolatey.org/install.ps1"

### e. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#        $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService",

#### ii. If using a Client Salt, add it here
#        $ChocolateyCentralManagementClientSalt = "clientsalt",

#### iii. If using a Service Salt, add it here
#        $ChocolateyCentralManagementServiceSalt = "servicesalt"
    )
    Import-DscResource -ModuleName PSDesiredStateConfiguration
    Import-DscResource -ModuleName cChoco

    Node 'localhost' {
## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
        Environment chocoDownloadUrl {
            Name  = "chocolateyDownloadUrl"
            Value = $ChocolateyNupkgUrl
        }

        cChocoInstaller installChocolatey {
            DependsOn = "[Environment]chocoDownloadUrl"
            InstallDir = Join-Path $env:ProgramData "chocolatey"
            ChocoInstallScriptUrl = $ChocolateyInstallPs1Url
        }

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#        cChocoFeature featureFipsCompliance {
#            FeatureName = "useFipsCompliantChecksums"
#        }

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
        cChocoConfig cacheLocation {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "cacheLocation"
            Value      = "C:\ProgramData\chocolatey\cache"
        }

#### Increase timeout to at least 4 hours
        cChocoConfig commandExecutionTimeoutSeconds {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "commandExecutionTimeoutSeconds"
            Value      = 14400
        }

#### Turn off download progress when running choco through integrations
        cChocoFeature showDownloadProgress {
            DependsOn   = "[cChocoInstaller]installChocolatey"
            FeatureName = "showDownloadProgress"
            Ensure      = "Absent"
        }

### c. Sources ###
#### Remove the default community package repository source
        cChocoSource removeCommunityRepository {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name       = "chocolatey"
            Ensure     = "Absent"
        }

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here.
#### NOTE: This EXAMPLE may require changes
        cChocoSource addInternalSource {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name        = "ChocolateyInternal"
            Source      = $NugetRepositoryUrl
            Credentials = $NugetRepositoryCredential
            Priority    = 1
        }

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
        cChocoPackageInstaller updateChocolatey {
            DependsOn   = "[cChocoSource]addInternalSource", "[cChocoSource]removeCommunityRepository"
            Name        = "chocolatey"
            AutoUpgrade = $true
        }

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
        cChocoPackageInstaller chocolateyLicense {
            DependsOn = "[cChocoPackageInstaller]updateChocolatey"
            Name      = "chocolatey-license"
        }

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
        Script disableLicensedSource {
            DependsOn  = "[cChocoPackageInstaller]chocolateyLicense"
            GetScript  = {
                $Source = choco source list --limitoutput | `
                    ConvertFrom-Csv -Delimiter '|' -Header Name, Source, Disabled | `
                    Where-Object Name -eq "chocolatey.licensed"

                return @{
                    Result = if ($Source) {
                        [bool]::Parse($Source.Disabled)
                    } else {
                        Write-Warning "Source 'chocolatey.licensed' was not present."
                        $true  # Source does not need disabling
                    }
                }
            }
            SetScript  = {
                $null = choco source disable --name "chocolatey.licensed"
            }
            TestScript = {
                $State = [ScriptBlock]::Create($GetScript).Invoke()
                return $State.Result
            }
        }

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
        cChocoPackageInstaller chocolateyLicensedExtension {
            DependsOn = "[Script]disableLicensedSource"
            Name      = "chocolatey.extension"
        }

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
        cChocoFeature hideElevatedWarnings {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "showNonElevatedWarnings"
            Ensure      = "Absent"
        }

        cChocoFeature useBackgroundService {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundService"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceWithNonAdmins {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundServiceWithNonAdministratorsOnly"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceUninstallsForUserInstalls {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "allowBackgroundServiceUninstallsFromUserInstallsOnly"
            Ensure      = "Present"
        }

        cChocoConfig allowedBackgroundServiceCommands {
            DependsOn   = "[cChocoFeature]useBackgroundService"
            ConfigName = "backgroundServiceAllowedCommands"
            Value       = "install,upgrade,uninstall"
        }

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
        if ($ChocolateyCentralManagementUrl) {
            cChocoPackageInstaller chocolateyAgent {
                DependsOn = "[cChocoPackageInstaller]chocolateyLicensedExtension"
                Name      = "chocolatey-agent"
            }

            cChocoConfig centralManagementServiceUrl {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                ConfigName = "CentralManagementServiceUrl"
                Value       = $ChocolateyCentralManagementUrl
            }

            if ($ChocolateyCentralManagementClientSalt) {
                cChocoConfig centralManagementClientSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementClientCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementClientSalt
                }
            }

            if ($ChocolateyCentralManagementServiceSalt) {
                cChocoConfig centralManagementServiceSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementServiceCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementServiceSalt
                }
            }

            cChocoFeature useCentralManagement {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagement"
                Ensure      = "Present"
            }

            cChocoFeature useCentralManagementDeployments {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagementDeployments"
                Ensure      = "Present"
            }
        }
    }
}

# If working this into an existing configuration with a good method for
$ConfigData = @{
    AllNodes = @(
        @{
            NodeName                    = "localhost"
            PSDscAllowPlainTextPassword = $true
        }
    )
}

try {
    Push-Location $env:Temp
    $Config = ChocolateyConfig -ConfigurationData $ConfigData
    Start-DscConfiguration -Path $Config.PSParentPath -Wait -Verbose -Force
} finally {
    Pop-Location
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires puppetlabs/chocolatey module
####  See https://forge.puppet.com/puppetlabs/chocolatey


## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$_repository_url = 'INTERNAL REPO URL'

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
$_choco_download_url = 'INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg'

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $_chocolatey_central_management_url = 'https://chocolatey-central-management:24020/ChocolateyManagementService'

#### ii. If using a Client Salt, add it here
# $_chocolatey_central_management_client_salt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $_chocolatey_central_management_service_salt = 'servicesalt'


## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
### Note: `chocolatey_download_url is completely different than normal
###  source locations. This is directly to the bare download url for the
###  chocolatey.nupkg, similar to what you see when you browse to
###  https://community.chocolatey.org/api/v2/package/chocolatey
class {'chocolatey':
  chocolatey_download_url => $_choco_download_url,
  use_7zip                => false,
}


## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations

#chocolateyfeature {'useFipsCompliantChecksums':
#  ensure => enabled,
#}

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolateyconfig {'cacheLocation':
  value => 'C:\ProgramData\chocolatey\cache',
}

#### Increase timeout to at least 4 hours
chocolateyconfig {'commandExecutionTimeoutSeconds':
  value => '14400',
}

#### Turn off download progress when running choco through integrations
chocolateyfeature {'showDownloadProgress':
  ensure => disabled,
}

### c. Sources ###
#### Remove the default community package repository source
chocolateysource {'chocolatey':
  ensure   => absent,
  location => 'https://community.chocolatey.org/api/v2/',
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE requires changes
chocolateysource {'internal_chocolatey':
  ensure             => present,
  location           => $_repository_url,
  priority           => 1,
  username           => 'optional',
  password           => 'optional,not ensured',
  bypass_proxy       => true,
  admin_only         => false,
  allow_self_service => false,
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/

package {'chocolatey':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}


## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/guides/organizations/organizational-deployment-guide#exercise-4-create-a-package-for-the-license

# TODO: Add resource for installing/ensuring the chocolatey-license package
package {'chocolatey-license':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
## Disabled sources still need all other attributes until
## https://tickets.puppetlabs.com/browse/MODULES-4449 is resolved.
## Password is necessary with user, but not ensurable, so it should not
## matter what it is set to here. If you ever do get into trouble here,
## the password is your license GUID.
chocolateysource {'chocolatey.licensed':
  ensure   => disabled,
  priority => '10',
  user     => 'customer',
  password => '1234',
  require  => Package['chocolatey-license'],
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
package {'chocolatey.extension':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
  require  => Package['chocolatey-license'],
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolateyfeature {'showNonElevatedWarnings':
  ensure => disabled,
}

chocolateyfeature {'useBackgroundService':
  ensure => enabled,
}

chocolateyfeature {'useBackgroundServiceWithNonAdministratorsOnly':
  ensure => enabled,
}

chocolateyfeature {'allowBackgroundServiceUninstallsFromUserInstallsOnly':
  ensure => enabled,
}

chocolateyconfig {'backgroundServiceAllowedCommands':
  value => 'install,upgrade,uninstall',
}

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if $_chocolatey_central_management_url {
  package {'chocolatey-agent':
    ensure   => latest,
    provider => chocolatey,
    source   => $_repository_url,
    require  => Package['chocolatey-license'],
  }

  chocolateyconfig {'CentralManagementServiceUrl':
    value   => $_chocolatey_central_management_url,
  }

  if $_chocolatey_central_management_client_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  if $_chocolatey_central_management_service_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  chocolateyfeature {'useChocolateyCentralManagement':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }

  chocolateyfeature {'useChocolateyCentralManagementDeployments':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }
}

Need Help? View our docs or file an issue.

There is already a version of this package in your Script Builder

Current Version	New Version

Downloads:

4,389

Downloads of v 2.1:

1,499

Last Update:

26 Mar 2017

Package Maintainer(s):

majkinetor

Software Author(s):

Velociraptor

Tags:

network dns freeware

Dns Jumper

This is not the latest version of Dns Jumper available.

2.1 | Updated: 26 Mar 2017

Downloads:

4,389

Downloads of v 2.1:

1,499

Maintainer(s):

majkinetor

Software Author(s):

Velociraptor

Tags:

network dns freeware

Dns Jumper 2.1

This is not the latest version of Dns Jumper available.

Legal Disclaimer: Neither this package nor Chocolatey Software, Inc. are affiliated with or endorsed by Velociraptor. The inclusion of Velociraptor trademark(s), if any, upon this webpage is solely to identify Velociraptor goods or services and not for commercial purposes.

Some Checks Have Failed or Are Not Yet Complete

Not All Tests Have Passed

Hide Checks

Validation Testing Passed

Verification Testing Passed

Details

Scan Testing Resulted in Flagged:

This package was submitted (and approved) prior to automated virus scanning integration into the package moderation processs.

We recommend clicking the "Details" link to make your own decision on installing this package.

Details

Learn More

Deployment Method: Individual Install, Upgrade, & Uninstall

To install Dns Jumper, run the following command from the command line or from PowerShell:

To upgrade Dns Jumper, run the following command from the command line or from PowerShell:

To uninstall Dns Jumper, run the following command from the command line or from PowerShell:

NOTE

This applies to both open source and commercial editions of Chocolatey.

1. Enter Your Internal Repository Url

(this should look similar to https://community.chocolatey.org/api/v2/)

2. Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the package and push it to a repository Download

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the package:
  Download
- Follow manual internalization instructions

Package Internalizer (C4B)

Run: (additional options)

choco download dnsjumper --internalize --version=2.1 --source=https://community.chocolatey.org/api/v2/

For package and dependencies run:

choco push --source="'INTERNAL REPO URL'"

Automate package internalization

3. Copy Your Script

choco upgrade dnsjumper -y --source="'INTERNAL REPO URL'" --version="'2.1'" [other options]

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:


choco upgrade dnsjumper -y --source="'INTERNAL REPO URL'" --version="'2.1'" 
$exitCode = $LASTEXITCODE

Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
  Exit 0
}

Exit $exitCode


- name: Install dnsjumper
  win_chocolatey:
    name: dnsjumper
    version: '2.1'
    source: INTERNAL REPO URL
    state: present

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.


chocolatey_package 'dnsjumper' do
  action    :install
  source   'INTERNAL REPO URL'
  version  '2.1'
end

See docs at https://docs.chef.io/resource_chocolatey_package.html.


cChocoPackageInstaller dnsjumper
{
    Name     = "dnsjumper"
    Version  = "2.1"
    Source   = "INTERNAL REPO URL"
}

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.


package { 'dnsjumper':
  ensure   => '2.1',
  provider => 'chocolatey',
  source   => 'INTERNAL REPO URL',
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

4. If applicable - Chocolatey configuration/installation

See infrastructure management matrix for Chocolatey configuration elements and examples.

Package Approved

This package was approved by moderator flcdrg on 25 Jan 2020.

Description

DNS Jumper is a portable freeware app which makes changing your DNS settings as easy as clicking a button. Some of the features are:

Quickly and easily change your IPv4 and IPv6 DNS settings
See your selected network card’s current DNS IP address.
Easily backup and restore your current DNS settings.
Check your DNS server response time.
Automated checking of all listed DNS response times, finding the fastest available. You can then quickly apply it to your DNS settings.
Add your own custom DNS server.
CMD (command line) support
Clear/Flush the DNS cache
Add your own language (Use Options > Languages > Translate feature)

Files

legal\eula_sordum's_freeware.rtf

legal\license.txt

END-USER LICENSE AGREEMENT ("EULA")

IMPORTANT-READ CAREFULLY: This End-User License Agreement ("EULA") is a legal agreement between you (either an individual or a single entity) and Sordum.org. By downloading and using the software from Sordum.org web site you are automatically agreeing to and show that you have read and understood the terms and conditions contained within this Freeware Software License Agreement. This Freeware Software License Agreement is then effective while you use and continue to make use of these software products. If you do not agree with this Freeware Software License Agreement you must not use software products downloaded from Sordum.orgwebsite � this Freeware Software License Agreement will then not apply to you.

1. Freeware
You may use the SOFTWARE without charge. (Any kind of donation welcome and very much appreciated)

2. Distribution of SOFTWARE.
You may make copies of the SOFTWARE as you wish; give exact copies of the original SOFTWARE to anyone; and distribute the SOFTWARE in its unmodified form via electronic means. (Under one circumstance : You must give a direct link the Original download page or Home page of the sordum.org), You may not charge any fees for the copy or use of the SOFTWARE itself. You must not represent in any way that you are selling the SOFTWARE itself. Your distribution of the SOFTWARE will not entitle you to any compensation from Sordum.org. You must distribute a copy of this EULA with any copy of the SOFTWARE and anyone to whom you distribute the SOFTWARE is subject to this EULA.

3. Restrictions
3.1 You may not reverse engineer, de-compile, or disassemble the SOFTWARE.
3.2 You may not rent, lease, or lend the SOFTWARE.
3.3 You may permanently transfer all of your rights under this EULA, provided the recipient agrees to the terms of this EULA.
3.4 You may not use the SOFTWARE to perform any unauthorized transfer of information or for any illegal purpose.
3.5 The Program may not be sold or incorporated into any product which is sold without prior permission from the Author

4. Code Distribution
Sordum.org does not provide the source code of the freeware applications available from the web site

5. NO WARRANTIES
Sordum.org expressly disclaims any warranty for the SOFTWARE. THE SOFTWARE AND ANY RELATED DOCUMENTATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OR MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. THE ENTIRE RISK ARISING OUT OF USE OR PERFORMANCE OF THE SOFTWARE REMAINS WITH YOU.
Copyright © 2006-2015 sordum.org. All rights reserved.

legal\VERIFICATION.txt

VERIFICATION

Verification is intended to assist the Chocolatey moderators and community
in verifying that this package's contents are trustworthy.

Package can be verified like this:

1. Go to

    http://www.sordum.org/7952/dns-jumper-v2-1/

    to download the file.

2. You can use one of the following methods to obtain the SHA256 checksum:
   - Use powershell function 'Get-FileHash'
   - Use Chocolatey utility 'checksum.exe'

    File : DnsJumper.exe
    MD5 : 44a2470e6d3891c295422344b153ca85
    SHA1 : 9e8966130fd59743d97effc7dcf05fb648710339


File 'eula_sordum's_freeware.rtf' is obtained from:
   http://www.sordum.org/eula

File 'license.txt' is converted above rtf file.

tools\DnsJumper.exe

md5: 44A2470E6D3891C295422344B153CA85 | sha1: 9E8966130FD59743D97EFFC7DCF05FB648710339 | sha256: AEDBAA8D63EFC4C6B5F6662EBE366FEABA12640150EA2D0346F99D8693DBE2D5 | sha512: A0CA2905915911225714809A4D0D4E50EC8642E3D5844F220B3016E29B610D3519302A4EDED847222899774E81125FA2EB7209EF2FB00600E67C4BD75EF449AA

tools\DnsJumper.ini

; Generated (05.01.2017 18:20:10) by DNS Jumper - Freeware DNS Changer
; www.sordum.org

[Main]
Language=Auto
LastAdapter=0
IniVersion=1
Wmi=True
AutoAddLastDns=True
AutoFlushDns=True
Sound=True
TrayTip=True
HideWindow=False
MinimiseToTray=True
CloseToTray=False
IP_Group=IPv4
IPv4_Group=Default
IPv6_Group=Default
SearchIP=http://www.google.com/search?q=%IP%
LookupIP=http://www.geoiptool.com/en/?IP=%IP%
MixedDns=False
ResolveWaitTime=False,300
DonateLabel=True

[Ipv4_Default]
US - Google Public DNS=8.8.8.8,8.8.4.4,True
US - OpenDNS=208.67.222.222,208.67.220.220,True
US - OpenDNS - 2=208.67.222.220,208.67.220.222,True
RU - Yandex=77.88.8.1,77.88.8.8,True
US - Norton ConnectSafe Basic=199.85.126.10,199.85.127.10,True
US - Level 3 - A=209.244.0.3,209.244.0.4,True
US - Level 3 - B=4.2.2.1,4.2.2.2,True
US - Level 3 - C=4.2.2.3,4.2.2.4,True
US - Level 3 - D=4.2.2.5,4.2.2.6,True
US - Comodo Secure=8.26.56.26,8.20.247.20,True
US - Dyn=216.146.35.35,216.146.36.36,True
US - Advantage=156.154.70.1,156.154.71.1,True
US - Norton DNS=198.153.192.1,198.153.194.1,True
US - Comodo=156.154.70.22,156.154.71.22,True
US - VeriSign Public DNS=64.6.64.6,64.6.65.6,True
GB - Fast Broadband=78.143.192.10,78.143.192.20,True
US - Qwest=205.171.3.65,205.171.2.65,True
US - Sprint=204.97.212.10,204.117.214.10,True
TR - TurkTelekom=195.175.39.40,195.175.39.39,True
DK - Censurfridns=89.233.43.71,91.239.100.100,True
RU - Safe DNS=195.46.39.39,195.46.39.40,True
IT - OpenNIC=192.71.245.208,193.183.98.154,True
DE - Open Root=178.19.70.8,212.224.71.116,True
FR - Open Root=37.187.23.23,37.187.99.178,True
DE - DNS WATCH=84.200.69.80,84.200.70.40,True
DE - ClaraNet=212.82.225.7,212.82.226.212,True
AT - FreeDNS=37.235.1.174,37.235.1.177,True
US - Sprintlink=199.2.252.10,204.97.212.10,True
DE - Cesidian Root=178.254.21.113,37.221.193.195,True
US - UltraDNS=204.69.234.1,204.74.101.1,True
GB - Tiscali=212.74.114.129,212.74.114.193,True
GB - Zen Internet=212.23.8.1,212.23.3.1,True
GB - Orange DNS=195.92.195.94,195.92.195.95,True
BG - MegaLan=95.111.55.251,95.111.55.250,True
GB - BSO Network=212.73.209.34,212.73.209.35,True
DE - NOAd DNS=136.243.146.101,136.243.146.102,True
IL - GreenTeam Internet=81.218.119.11,209.88.198.133,True
CH - Swiss Privacy=77.109.148.136,77.109.148.137,True
US - Hurricane Electric=74.82.42.42,,True
US - ServInt=206.214.214.28,,True
ES - Servidordenoms.cat=109.69.8.51,,True
FR - Budget Telekom=95.170.0.168,,True

[Ipv4_Family]
US - OpenDNS Family=208.67.222.123,208.67.220.123,True
US - Norton ConnectSafe Family=199.85.126.30,199.85.127.30,True
RU - Yandex Family=77.88.8.7,77.88.8.3,True

[Ipv4_Secure]
US - Norton ConnectSafe Secure=199.85.126.20,199.85.127.20,True
RU - Yandex Safe=77.88.8.88,77.88.8.2,True
US - Comodo Secure=8.26.56.26,8.20.247.20,True

[Ipv6_Default]
US - Google Public DNS=2001:4860:4860::8888,2001:4860:4860::8844,True
US - OpenDNS Sandbox=2620:0:ccc::2,2620:0:ccd::2,True
RU - Yandex DNS=2a02:6b8::feed:0ff,2a02:6b8:0:1::feed:0ff,True
DK - Censurfridns=2001:67c:28a4::,2002:d596:2a92:1:71:53::,True
US - Cesidian Root=2001:470:6c:521::2,2001:470:6d:521::1,True

[Ipv6_Family]
RU - Yandex Family=2a02:6b8::feed:a11,2a02:6b8:0:1::feed:a11,True

[Ipv6_Secure]
RU - Yandex Safe=2a02:6b8::feed:bad,2a02:6b8:0:1::feed:bad,True

[Language_Chinese_简体中文 - Simplified]
01="大眼仔~旭（Anan）"
02="此应用程序旨在简化 DNS 的更改过程。"
03="应用 DNS\n 应用 DNS 服务"
04="最快 DNS\n 查找最快 DNS"
05="清除 DNS\n 清除 DNS 缓存"
06="选项\n 选项菜单"
07="更新 ...\n 设置\n 捐赠\n 主页\n 联系\n 关于"
08="显示 DnsJumper\n 帮助\n 退出 DnsJumper"
09="捐赠\n 请捐赠我们的新项目!"
10="选择网络适配器"
11="所有网络适配器"
12="网络适配器未找到"
13="刷新"
14="打开网络连接"
15="快速配置"
16="默认 DNS\n 恢复 DNS\n 备份 DNS"
17="选择一个 DNS 服务器"
18="默认 DNS\n 已备份 DNS\n 自定义 DNS"
19="使用 IPv6 DNS\n IPv6 选项"
20="DNS 组"
21="默认 DNS 列表\n 源 DNS 列表\n家庭安全 DNS 列表"
22="DNS 选项\n添加, 删除或编辑 DNS"
23="浏览或复制 DNS 地址"
24="浏览 DNS 地址\n 第一个 DNS 信息\n 第二个 DNS 信息\n 复制 DNS 服务器"
25="自定义 DNS 服务器\n 输入一个 自定义 DNS 服务器"
26="检查 DNS\n 检查解析时间"
27="请稍候..."
28="DNS 更改成功!"
29="成功刷新 DNS 解析程序缓存。"
30="解析时间:"
31="毫秒"
32="不正确的 DNS IP!"
33="主机不可访问"
34="访问错误"
35="未知错误"
36="IP 框为空!"
37="输入一个不正确的服务器地址。"
38="该操作系统不支持 IPv6 寻址!"
39="此功能仅支持 IPv4。"
40="DNS 服务器名称\n DNS 1\n DNS 2\n 结果 1\n 结果 2"
41="应用 DNS\n 标记全部\n 取消标记全部\n DNS 信息"
42="加速解析\n 往返延迟时间。您可以使用 1 和 5000 毫秒之间的数字。"
43="混合\n 显示测试结果混合"
44="开始 DNS 测试"
45="停止 DNS 测试"
46="应用 DNS 服务器"
47="等待"
48="错误:"
49="常规设置\n DNS 列表"
50="添加默认网关的 IP 地址作为最后一个DNS，\n 如果其他 DNS 服务器失败，将使用(仅 Ip v4)"
51="清除 DNS 每个 DNS 更改自动缓存"
52="播放声音"
53="托盘信息息"
54="在启动时隐藏主窗口"
55="最小化 DnsJUmper 到系统托盘"
56="关闭 DnsJumper 到系统托盘"
57="搜索 DNS 信息链接"
58="DNS 查找链接"
59="在系统启动时运行 DnsJumper"
60="以下的参数应用在系统启动时"
61="显示 IPv6 DNS 列表"
62="添加新的 DNS 服务器组"
63="删除所选 DNS 组"
64="导入所有列表"
65="导出所有列表"
66="行\n DNS 服务器名称\n DNS 1\n DNS 2"
67="DNS 服务器名称:\n 第一个 DNS 服务器:\n 第二个 DNS 服务器:"
68="保存更改"
69="添加\n 添加或编辑 DNS"
70="删除\n 删除所选 DNS"
71="不正确的参数"
72="你想保存 DNS 列表的更改吗?"
73="文本文档"
74="无法写入文件!"
75="更新信息:"
76="发现新版本（程序可更新）\n你要访问程序的网站下载更新吗?"
77="发现新版本!\n你想更新吗?"
78="发现新版本!"
79="更新错误!"
80="%LINK% 不可用。\n请稍后再试。"
81="收到更新信息是不正确的!\n%LINK%"

[Language_Chinese_繁體中文 - Traditional]
01="丹楓"
02="此應用程式旨在簡化\nDNS 變更過程。"
03="套用 DNS\n 套用 DNS 伺服器"
04="最快的 DNS\n 尋找最快的 DNS"
05="清除 DNS\n 清除 DNS 快取"
06="選項\n 選項功能表"
07="更新(&U) ...\n 設定(&S)\n 捐贈(&D)\n 首頁(&H)\n 聯繫(&C)\n 關於(&A)"
08="顯示 DnsJumper(&S)\n 說明(&H)\n 結束 DnsJumper(&x)"
09="請捐贈\n 請捐贈我們的新專案!"
10="選擇網路介面卡"
11="全部網路介面卡"
12="找不到網路介面卡"
13="重新整理"
14="開啟網路連線"
15="快速設定"
16="預設 DNS\n 還原 DNS\n 備份 DNS"
17="選擇 DNS 伺服器"
18="預設 DNS\n 備份 DNS\n 自訂 DNS"
19="使用 IPv6 DNS\n IPv6 選項"
20="DNS 群組"
21="預設 DNS 清單\n 安全 DNS 清單\n家庭安全 DNS 清單"
22="DNS 選項\n新增、刪除或編輯 DNS"
23="瀏覽或複製 DNS 位址"
24="瀏覽 DNS 伺服器\n 第一個 DNS 資訊\n 第二個 DNS 資訊\n 複製 DNS 伺服器"
25="自訂 DNS 伺服器\n 輸入自訂 DNS 伺服器"
26="檢查 DNS\n 檢查解析時間"
27="請稍候..."
28="DNS 已變更成功!"
29="已成功清除 DNS 解析程式快取。"
30="解析時間:"
31="毫秒"
32="不正確的 DNS IP!"
33="主機無法連線"
34="存取錯誤"
35="未知錯誤"
36="IP 方塊空白!"
37="您所輸入的伺服器位址錯誤。"
38="作業系統不支援 ipv6 定址!"
39="此功能僅適用於 IPv4。"
40="DNS 伺服器名稱\n DNS 1\n DNS 2\n 結果 1\n 結果 2"
41="套用 DNS\n 全部標示\n 全部不標示\n DNS 資訊"
42="加速解析\n 來回延遲時間。您可以使用 1 到 5000 毫秒之間的數字。"
43="混合\n 混合顯示測試結果"
44="開始 DNS 測試"
45="停止 DNS 測試"
46="套用 DNS 伺服器"
47="等候"
48="錯誤:"
49="一般設定\n DNS 清單"
50="加入預設閘道 IP 位址作為最後一個 DNS，(僅適用於 Ip v4)\n 如果其他 DNS 伺服器失敗，它將使用"
51="每次 DNS 變更時自動清除 DNS 快取"
52="播放音效"
53="系統匣上的訊息"
54="啟動後隱藏主視窗"
55="將 DnsJUmper 最小化到系統匣"
56="關閉 DnsJumper 時縮至系統匣"
57="搜尋 DNS 資訊連結"
58="DNS 查閱連結"
59="開機時自動啟動 DnsJumper"
60="系統啟動時套用下列參數"
61="顯示 Ipv6 Dns 清單"
62="加入新的 DNS 伺服器群組"
63="刪除所選的 DNS 群組"
64="匯入全部清單"
65="匯出全部清單"
66="列\n DNS 伺服器名稱\n DNS 1\n DNS 2"
67="DNS 伺服器名稱:\n 第一個 Dns 伺服器:\n 第二個 Dns 伺服器:"
68="儲存變更"
69="新增\n 新增或編輯 DNS"
70="刪除\n 刪除所選 DNS"
71="參數不正確"
72="您要儲存 DNS 清單的變更嗎?"
73="文字文件"
74="無法寫入檔案!"
75="更新資訊:"
76="找到新版本(有程式更新可用)\n您要造訪程式的官網嗎?"
77="找到新的更新!\n您要更新嗎?"
78="找不到新的更新!"
79="更新錯誤!"
80="%LINK% 不可用。\n請稍後再試。"
81="收到的更新資訊是不正確的!\n%LINK%"

[Language_Dutch_Nederlands]
01="Marksken58"
02="Deze toepassing is ontworpen als vereenvoudigng\nvan het proces om van DNS te veranderen."
03="DNS toepassen\n DNS Server toepassen"
04="Snelste DNS\n Vind snelste DNS"
05="DNS opkuisen\n DNS-cache verwijderen"
06="Opties\n Menu opties"
07="&Updates ...\n  &Instellingen\n  &Doneren\n  &Startpagina\n &Contact"
08="&Toon DnsJumper\n &Help\n &Sluiten DnsJumper"
09="Graag donatie\n  Graag een donatie voor onze nieuwe projecten!"
10="Selecteer Netwerk Adapter"
11="Alle netwerk adapters"
12="Netwerk adapter niet gevonden"
13="Vernieuwen"
14="Netwerkconnecties openen"
15="Snelle configuratie"
16="Standaard DNS\n  Herstel DNS\n  backup DNS"
17="Kies een DNS server"
18="Standaard DNS\n Backup DNS\n Aangepaste DNS"
19="Gebruik IPv6 DNS\n IPv6 Opties"
20="DNS Groepen"
21="Standaard DNS-lLijst\n Veilige DNS-lijst\n Familievriendelijke DNSlijst"
22="DNS Opties\nToevoegen, Verwijderen Of Bewerken DNS"
23="Bladeren of DNS-adres kopiëren"
24="Blader in DNS Servers\n Eerste DNS Info\n Tweede DNS Info\n Kopieer DNS Servers"
25="Aangepaste DNS-server\n  Vul een aangepaste DNS-server in"
26="Controleer DNS\n Controleer oplostijd"
27="Wacht a.u.b. ..."
28="DNS succesvol gewijzigd!"
29="Succesvol DNS-omzettingscache opgekuist."
30="Oplostijd:"
31="milliseconden"
32="Onjuiste DNS IP!"
33="Host is onbereikbaar"
34="toegangsfout"
35="Onbekende fout"
36="IP vak is leeg!"
37="Je vulde een verkeerd adres van de server in."
38="Het besturingssysteem ondersteunt geen IPv6 adressen!"
39="Deze functie is alleen voor IPv4."
40="DNS Server Naam\n DNS 1\n DNS 2\n Resultaat 1\n Resultaat 2"
41="DNS toepassen\n  Alles markeren\n  Maak alle markeringen ongedaan\n  DNS Info"
42="Turbo oplossing\n Tijd voor uitschakelvertraging. U kunt een getal gebruiken tussen 1 en 5000 milliseconden."
43="Gemengd\n  Toon de testresultaten gemengd"
44="Start DNS Test"
45="Stop DNS Test"
46="DNS Server toevoegen"
47="Wacht"
48="Fout:"
49="Algemene instellingen\n  DNS Lijst"
50="Voeg het standaard Gateway IP-adres toe als laatste DNS (alleen voor IPv4)\n  Als andere DNS-servers werken, zal het gebruikt worden."
51="Wis DNS-cache automatisch bij elke DNS-wijziging"
52="Geluid afspelen"
53="Berichtenvak aan"
54="Verberg hoofdvenster bij het opstarten"
55="Minimaliseer DnsJumper naar het systeemvak"
56="Sluit DnsJumper naar het systeemvak"
57="Zoek DNS-informatielink"
58="DNS Lookup Link"
59="Start DnsJumper bij systeemopstart"
60="Pas de volgende parameters toe bij het opstarten"
61="Toon IPv6 Dns Lijst"
62="Voeg nieuwe DNS-Servergroep toe"
63="Verwijder geslecteerde DNS-Servergroep"
64="Importeer Alles Lijst"
65="Exporteer Alles Lijst"
66="Rij\n DNS Servernaam\n DNS 1\n DNS 2"
67="DNS Servernaam:\n Eerste DNS-Server:\n Tweede DNS-Server:"
68="Sla wijzigingen op"
69="Toevoegen\n DNS Toevoegen of Bewerken"
70="Verwijderen\n Verwijder geselecteerde DNS"
71="Onjuiste parameter"
72="Wil je de veranderingen in de DNS-lijst opslaan?"
73="Tekstdocumenten"
74="Kan bestand niet wegschrijven!"
75="Update Info:"
76="Nieuwe versie gevonden (Programma update is beschikbaar)\nWil je de website van het programma bezoeken?"
77="Nieuwe update gevonden!\nWil je bijwerken?"
78="Geen neiuwe update gevonden!"
79="Update fout!"
80="%LINK% is niet beschikbaar.\nProbeer het later opnieuw."
81="Ontvangen update-informatie is onjuist!\n%LINK%"

[Language_English]
01="BlueLife"
02="This application is designed to simplify\n the DNS changing process."
03="Apply DNS\n Apply DNS Server"
04="Fastest DNS\n Find Fastest DNS"
05="Flush DNS\n Purges The DNS Cache"
06="Options\n Options Menu"
07="&Updates ...\n &Settings\n &Donate\n &HomePage\n &Contact\n &About"
08="&Show DnsJumper\n &Help\n E&xit DnsJumper"
09="Please Donate\n Please donate our new projects!"
10="Select Network Adapter"
11="All Network Adapters"
12="Network Adapter Not Found"
13="Refresh"
14="Open Network Connections"
15="Quick Configuration"
16="Default DNS\n Restore DNS\n Backup DNS"
17="Choose a DNS Server"
18="Default DNS\n Backed-up DNS\n Custom DNS"
19="Use IPv6 DNS\n IPv6 Options"
20="DNS Groups"
21="Default DNS List\n Secure DNS List\nFamily Safe DNS List"
22="DNS Options\nAdd, Delete Or Edit DNS"
23="Browse or Copy DNS address"
24="Browse DNS Servers\n First DNS Info\n Second DNS Info\n Copy DNS Servers"
25="Custom DNS Server\n Enter a Custom DNS Server"
26="Check DNS\n Check Resolve Time"
27="Please Wait..."
28="DNS successfully changed!"
29="Successfully flushed the DNS Resolver Cache."
30="Resolve time:"
31="milliseconds"
32="Incorrect DNS IP!"
33="Host is unreachable"
34="Access error"
35="Unknown error"
36="IP box is empty!"
37="You entered an incorrect server address."
38="The operating system does not support ipv6 addressing!"
39="This feature is only for IPv4."
40="DNS Server Name\n DNS 1\n DNS 2\n Result 1\n Result 2"
41="Apply DNS\n Mark All\n Unmark All\n DNS Info"
42="Turbo Resolve\n Round trip delay time.  You can use a number between 1 and 5000 milliseconds."
43="Mixed\n Show the test results mixed"
44="Start DNS Test"
45="Stop DNS Test"
46="Apply DNS Server"
47="Wait"
48="Error:"
49="General Setting\n DNS List"
50="Add the Default Gateway IP Address as last DNS, (Only for Ip v4)\n If other DNS servers fails it will be used"
51="Clear DNS cache automatically on each DNS change"
52="Play sound"
53="Tray messages On"
54="Hide main windows on startup"
55="Minimise DnsJUmper to system tray"
56="Close DnsJumper to system tray"
57="Search DNS Info Link"
58="DNS Lookup Link"
59="Start DnsJumper on system startup"
60="Apply following parameters at system startup"
61="Show Ipv6 Dns List"
62="Add new DNS Server Group"
63="Delete Selected DNS Group"
64="Import All List"
65="Export All List"
66="Row\n DNS Server Name\n DNS 1\n DNS 2"
67="DNS Server Name:\n First Dns Server:\n Second Dns Server:"
68="Save Changes"
69="Add\n Add Or Edit DNS"
70="Delete\n Delete Selected DNS"
71="Incorrect parameter"
72="Do you want to save the changes of the DNS list?"
73="Text Documents"
74="Unable to write file!"
75="Update Info:"
76="New version found (Program update available)\nDo you want to visit the program's website?"
77="New update found!\nDo you want to update?"
78="No new update found!"
79="Update Error!"
80="%LINK% is unavailable.\nPlease try again later."
81="Received update information is incorrect!\n%LINK%"

[Language_French_Français]
01="Largo"
02="Cette application est conçue pour simplifier\n processus de changement de DNS."
03="Appliquer DNS\n Appliquer serveur DNS"
04="DNS plus rapide\n Trouver DNS plus rapide"
05="Vider DNS\n Vider le cache DNS"
06="Options\n Menu Options"
07="&Mises à jour ...\n &Paramètres\n &Faire un don\n &Page d'accueil\n &Contact\n &À Propos De"
08="&Afficher DnsJumper\n &Aide\n Q&uitter DnsJumper"
09="Envoyer don\n Envoyer don pour notre nouveau projet!"
10="Sélectionnez Adaptateur réseau"
11="Tous les adaptateurs réseau"
12="Adaptateur Réseau Introuvable"
13="Rafraîchir"
14="Ouvrir Connexions Réseau"
15="Configuration Rapide"
16="DNS par Défaut\n Restaurer DNS\n Sauvegarder DNS"
17="Choisissez un serveur DNS"
18="DNS par défaut\n DNS Sauvegardé\n DNS personnalisé"
19="Utiliser DNS IPv6\n Options IPv6"
20="Groupes DNS"
21="Liste de DNS par défaut\n Liste DNS Sécurisé\nListe DNS sûr pour la famille"
22="Options de DNS\nAjouter, Supprimer ou Modifier DNS"
23="Parcourir ou Copier l'adresse DNS"
24="Parcourir les serveurs DNS\n Première Infos DNS\n Deuxième Infos DNS\n Copiez serveurs DNS"
25="Serveur DNS personnalisé\n Entrez un serveur DNS personnalisé"
26="Vérifiez DNS\n Vérifiez Résoudre Temps Réponse"
27="Patienter s'il vous plaît..."
28="DNS changé avec succès!"
29="Cache DNS effacé avec succès."
30="Temps de résolution:"
31="millisecondes"
32="IP DNS incorrect!"
33="Host est inaccessible"
34="Erreur d'accès"
35="Erreur inconnue"
36="Boîte IP est vide!"
37="Vous avez saisi une adresse de serveur incorrect."
38="Le système d'exploitation ne supporte pas les adresses IPv6!"
39="DNS Server Name\n DNS 1\n DNS 2\n Result 1\n Result 2"
40="Nom du serveur DNS\n DNS 1\n DNS 2\n Résultat 1\n Résultat 2"
41="Appliquer DNS\n Marquer tout\n Enlever tout\n Information DNS"
42="Turbo Ping\n Temps aller-retour. Utilisez un nombre entre 1 et 5000 millisecondes"
43="Mixte\n Voir les résultats des tests mixtes"
44="Lancer test DNS"
45="Stop Test DNS"
46="Applique Serveur DNS"
47="Attendre"
48="Erreur:"
49="Réglage Général\n Liste de DNS"
50="Ajouter l'adresse IP par défaut de la passerelle comme le dernier DNS (IPv4 uniquement)\n Il sera utilisé si d'autres serveurs DNS ne répondent pas"
51="Cache DNS Effacer automatiquement à chaque changement de DNS"
52="Jouer Son"
53="Activer les notifications"
54="Masquer la fenêtre principale au démarrage de Windows"
55="Minimiser DnsJUmper dans la barre système"
56="Fermer DnsJumper dans la barre système"
57="Recherche d'informations DNS"
58="Lien site de DNS"
59="Lancer DnsJumper au démarrage du système"
60="Appliquer les paramètres suivants au démarrage du système"
61="Afficher la liste DNS IPv6"
62="Ajouter un nouveau Groupe Serveur DNS"
63="Supprimer le groupe DNS Sélectionné"
64="Importer Toute Liste"
65="Exporter toute Liste"
66="Rang\n Nom Serveur DNS\n DNS 1\n DNS 2"
67="Nom Serveur DNS:\n Premièr serveur DNS:\n Deuxième serveur DNS:"
68="Sauvegarder Changements"
69="Ajouter\n Ajouter ou modifier DNS"
70="Supprimer\n Supprimer DNS Sélectionné"
71="Paramètre incorrect"
72="Voulez-vous enregistrer les modifications de la liste de DNS?"
73="Documents texte"
74="Impossible d'écrire le fichier!"
75="Information De Mise À Jour:"
76="Nouvelle version trouvée (Mise à jour du Programme disponible)\nVoulez-vous visiter le site Web du programme?"
77="Nouvelle mise à jour trouvée!\nVoulez-vous mettre à jour?"
78="Aucune nouvelle mise à jour trouvée!"
79="Erreur Mise à Jour!"
80="%LIEN% est indisponible.\nS'il vous plaît réessayer plus tard."
81="Informations de mise à jour reçue est incorrecte!\n%LIEN%"

[Language_German_Deutsch]
01="luke"
02="Diese Anwendung wurde entwickelt um die DNS-Einstellungen zu vereinfachen.."
03="Übernehmen\n  DNS-Einstellungen anwenden"
04="Schnellster DNS\n Schnellsten DNS-Server ermitteln"
05="Flush DNS\n DNS-Cache leeren"
06="Optionen\n Optionsmenü"
07="&Updates ...\n &Einstellungen\n &Spenden\n &Website\n &Kontakt\n &Über"
08="&Zeige DnsJumper\n &Hilfe\n &DnsJumper beenden"
09="Bitte spenden \n Bitte unterstütze unsere neuen Projekte!"
10="Netzwerkadapter auswählen"
11="Alle Netzwerkadapter"
12="Netzwerkadapter nicht gefunden"
13="Aktualisieren"
14="Öffne Netzwerkverbindungen"
15="Schnellkonfiguration"
16="Voreinstellung\n Wiederherstellen\n Einstellungen sichern"
17="DNS-Server wählen"
18="Voreinstellung\n Gesicherte Einstellungen\n Benutzerdefinierte Einstellungen"
19="IPv6 DNS nutzen\n IPv6 Optionen"
20="DNS-Gruppen"
21="Voreingestellte DNS Liste\n Sichere DNS Liste\nKindersichere DNS Liste"
22="DNS-Optionen\nhinzufügen, entfernen oder bearbeiten"
23="DNS Adressen durchsuchen oder kopieren"
24="Durchsuche DNS-Server\n erster DNS-Server\n zweiter DNS-Server\n DNS-Einstellungen kopieren"
25="Benutzerdefinierte DNS\n DNS Adresse eingeben"
26="Überprüfe DNS\n Überprüfe Antwortzeit"
27="Bitte warten..."
28="DNS-Einstellungen wurden übernommen!"
29="DNS-Cache erfolgreich gelöscht."
30="Antwortzeit:"
31="Millisekunden"
32="Ungültige DNS IP!"
33="Host nicht erreichbar"
34="Zugriffsfehler"
35="Unbekannter Fehler"
36="IP-Feld ist leer!"
37="Sie haben eine falsche Serveradresse eingegeben."
38="Betriebssystem unterstützt kein IPv6!"
39="Diese Funktion gilt nur für IPv4."
40="DNS-Server Name\n DNS 1\n DNS 2\n Ergebnis 1\n Ergebnis 2"
41="Übernehme DNS\n Alles markieren\n Alles abwählen\n DNS Info"
42="Turbo Ping\n Paketumlaufzeit.  Nutze eine Zahl zwischen 1 und 5000 Millisekunden."
43="Gemischt\n Testergebnisse gemischt anzeigen"
44="Starte DNS Test"
45="Beende DNS Test"
46="Übernehme DNS-Server"
47="Moment!"
48="Fehler:"
49="Allgemeine Einstellungen\n DNS Liste"
50="Standardgateway IP-Adresse als letzten DNS-Server hinzufügen, (Nur für IPv4)\n Wird verwendet, wenn keiner der DNS-Server antwortet."
51="DNS-Cache bei jeder Änderung automatisch löschen"
52="Ton wiedergeben"
53="Infobereich an"
54="Verberge das Hauptfenster beim Start"
55="DnsJumper in den Infobereich minimieren"
56="Nach Schließen im Infobereich weiter ausführen"
57="Link um nach DNS Infos zu suchen"
58="DNS Lookup Link"
59="DnsJumper mit Windows starten"
60="Folgende Parameter beim Systemstart anwenden"
61="Zeige IPv6 DNS Liste"
62="DNS-Server-Gruppe hinzufügen"
63="Entferne die ausgewählte Gruppe"
64="Importiere alles zu Liste"
65="Alles exportieren in Liste"
66="Zeile\n DNS-Server Name\n DNS 1\n DNS 2"
67="DNS-Server Name:\n erster DNS-Server:\n zweiter DNS-Server:"
68="Änderungen speichern"
69="Hinzufügen\n Hinzufügen oder Bearbeiten"
70="Entfernen\n Entferne gewählten DNS-Server"
71="Falscher Parameter"
72="Die Änderungen der DNS Liste speichern?"
73="Textdokumente"
74="Fehler beim Schreiben in Datei!"
75="Updateinformation:"
76="Neue Version (Programm-Update) gefunden!\nMöchten Sie die DnsJumper-Website aufrufen?"
77="Neue Version verfügbar!\nJetzt aktualisieren?"
78="Keine neue Version verfügbar!"
79="Update-Fehler!"
80="%LINK% nicht verfügbar.\nVersuchen Sie es später noch einmal."
81="Empfangene Update-Informationen fehlerhaft!\n %LINK%"

[Language_Greek_Ελληνικά]
01="geogeo  (www.geogeo.gr)"
02="Αυτή η εφαρμογή έχει σχεδιαστεί για να απλοποιήσει\n τη διαδικασία αλλαγής DNS."
03="Εφαρμογή DNS\n Εφαρμογή Διακομιστή DNS"
04="Ταχύτερο DNS\n Εύρεση ταχύτερου DNS"
05="Εκκαθάριση DNS\n Καθαρίζει την προσωρινή αποθήκευση DNS"
06="Επιλογές\n Μενού επιλογών"
07="Ε&νημερώσεις ...\n &Ρυθμίσεις\n &Δωρεά\n &Ιστοσελίδα\n &Επικοινωνία\n &Περί..."
08="&Εμφάνιση DnsJumper\n &Βοήθεια\n Έ&ξοδος DnsJumper"
09="Κάντε δωρεά\n Παρακαλούμε υποστηρίξτε τα νέα μας έργα!"
10="Επιλέξτε προσαρμογέα δικτύου"
11="Όλοι οι προσαρμογείς δικτύου"
12="Δεν βρέθηκε προσαρμογέας δικτύου"
13="Ανανέωση"
14="Άνοιγμα συνδέσεων δικτύου"
15="Γρήγορη διαμόρφωση"
16="Προεπιλεγμένο DNS\n Επαναφορά DNS\n Αντίγραφο ασφαλείας DNS"
17="Επιλέξτε έναν διακομιστή DNS"
18="Προεπιλεγμένο DNS\n Αντίγραφο ασφαλείας DNS\n Προσαρμοσμένο DNS"
19="Χρήση DNS IPv6\n Επιλογές IPv6"
20="Ομάδες DNS"
21="Προεπιλεγμένη λίστα DNS\n Λίστα ασφαλών DNS\nΛίστα DNS παιδικής προστασίας"
22="Επιλογές DNS\nΠροσθήκη, Διαγραφή ή Επεξεργασία DNS"
23="Εύρεση ή Αντιγραφή διεύθυνσης DNS"
24="Εύρεση διακομιστών DNS\n Πληροφορίες πρώτου DNS\n Πληροφορίες δεύτερου DNS\n Αντιγραφή διακομιστών DNS"
25="Προσαρμ. διακομιστής DNS\n Εισαγωγή ενός Προσαρμοσμένου διακομιστή DNS"
26="Έλεγχος DNS\n Έλεγχος χρόνου επίλυσης"
27="Παρακαλώ περιμένετε..."
28="Το DNS άλλαξε με επιτυχία!"
29="Επιτυχής εκκαθάριση της προσωρινής μνήμης επίλυσης DNS."
30="Χρόνος επίλυσης:"
31="ms"
32="Εσφαλμένη DNS IP!"
33="Ο Host δεν είναι προσβάσιμος"
34="Σφάλμα πρόσβασης"
35="Άγνωστο σφάλμα"
36="Το πεδίο IΡ είναι κενό!"
37="Έχετε εισάγει λανθασμένη διεύθυνση διακομιστή."
38="Το λειτουργικό σύστημα δεν υποστηρίζει διευθυνσιοδότηση ipv6!"
39="Αυτό το χαρακτηριστικό είναι μόνο για IPv4."
40="Όνομα διακομιστή DNS\n DNS 1\n DNS 2\n Αποτέλεσμα 1\n Αποτέλεσμα 2"
41="Εφαρμογή DNS\n Επιλογή όλων\n Καμία επιλογή\n Πληροφορίες DNS"
42="Επίλυση Turbo\n Χρόνος καθυστέρησης κύκλου. Μπορείτε να χρησιμοποιήσετε έναν αριθμό μεταξύ 1 και 5000 ms."
43="Συνδυασμός\n Εμφάνιση των αποτελεσμάτων ελέγχου συνδυασμένα"
44="Έναρξη δοκιμής DNS"
45="Διακοπή δοκιμής DNS"
46="Εφαρμογή διακομιστή DNS"
47="Αναμονή"
48="Σφάλμα:"
49="Γενικές ρυθμίσεις\n Λίστα DNS"
50="Προσθήκη της διεύθυνσης IP της προεπιλ. πύλης του τελευταίου DNS, (Μόνο για IΡ v4)\n Θα χρησιμοποιηθεί, εάν αποτύχουν οι άλλοι διακομιστές DNS."
51="Εκκαθάριση προσωρινής μνήμης DNS αυτόματα, σε κάθε αλλαγή DNS"
52="Αναπαραγωγή ήχου"
53="Εμφάνιση μηνυμάτων στη γραμμή ειδοποιήσεων"
54="Απόκρυψη κεντρικού παραθύρου κατά την εκκίνηση"
55="Ελαχιστοποίηση του DnsJUmper στην περιοχή ειδοποιήσεων"
56="Κλείσιμο του DnsJumper στην περιοχή ειδοποιήσεων"
57="Αναζήτηση συνδέσμου πληροφοριών DNS"
58="Σύνδεσμος αναζήτησης DNS"
59="Έναρξη του DnsJumper στην εκκίνηση του συστήματος"
60="Εφαρμογή των παρακάτω παραμέτρων στην εκκίνηση του συστήματος"
61="Εμφάνιση λίστας Ipv6 Dns"
62="Προσθήκη νέας ομάδας διακομιστών DNS"
63="Διαγραφή της επιλεγμένης ομάδας DNS"
64="Εισαγωγή ολόκληρης της λίστας"
65="Εξαγωγή ολόκληρης της λίστας"
66="Σειρά\n Όνομα διακομιστή DNS\n DNS 1\n DNS 2"
67="Όνομα διακομιστή DNS:\n Πρώτος διακομιστής Dns:\n Δεύτερος διακομιστής Dns:"
68="Αποθήκευση αλλαγών"
69="Προσθήκη\n Προσθήκη ή Επεξεργασία DNS"
70="Διαγραφή\n Διαγραφή επιλεγμένου DNS"
71="Λανθασμένη παράμετρος"
72="Θέλετε να αποθηκεύσετε τις αλλαγές της λίστας DNS;"
73="Έγγραφα κειμένου"
74="Δεν είναι δυνατή η εγγραφή στο αρχείο!"
75="Πληροφορίες ενημέρωσης:"
76="Βρέθηκε νέα έκδοση (Διαθέσιμη ενημέρωση προγράμματος)\nΘέλετε να επισκεφθείτε την ιστοσελίδα του προγράμματος;"
77="Βρέθηκε νέα έκδοση!\nΘέλετε να κάνετε ενημέρωση;"
78="Δεν βρέθηκε νέα έκδοση!"
79="Σφάλμα ενημέρωσης!"
80="Το %LINK% δεν είναι διαθέσιμο.\nΠαρακαλώ δοκιμάστε ξανά αργότερα."
81="Οι ληφθείσες πληροφορίες ενημέρωσης είναι εσφαλμένες!\n%LINK%"

[Language_Hungarian_magyar]
01="LaMoLa"
02="Az alkalmazás célja, hogy egyszerűsítse\na DNS változtatás  folyamatát."
03="DNS használata\nDNS Szerver használata"
04="Leggyorsabb DNS\nLeggyorsabb DNS megkeresése"
05="DNS ürítése..... \nDNS-Gyorsítótár ürítése"
06="Beállítások\nBeállítások Menü megnyitása"
07="&Frissítések...\n&Beállítások\n&Adomány\n&Weboldal\n&Kapcsolat"
08="&DnsJumper megjelenítése\n&Súgó\n&Kilépés"
09="Adományozás\nSegítse adományával, az új projektek fejlesztését"
10="Hálózati adapter kiválasztása"
11="Összes hálózati adapter"
12="Nem található hálózati adapter"
13="Frissítés"
14="Hálózati kapcsolatok megnyitása"
15="Gyors konfiguráció"
16="Alapértelmezett DNS\nDNS visszaállítása\nDNS biztonsági mentése"
17="DNS szerver kiválasztása"
18="Alapértelmezett DNS\nMentett DNS\nSaját DNS"
19="IPv6 DNS használat\nIPv6 Opciók"
20="DNS csoportok"
21="Alapértelmezett DNS Lista\nBiztonságos DNS Lista\nCsaládbiztonsági DNS-Lista"
22="DNS Opciók\nDNS hozzáadás, törlés vagy szerkesztés"
23="DNS cím tallózás vagy másolás"
24="DNS Szerverek tallózása\nElsődleges DNS infó.\nMásodlagos DNS infó.\nDNS Szerverek másolása"
25="Saját DNS Szerver\nAdjon meg egy saját, egyéni DNS Szervert"
26="DNS ellenőrzése\nVálaszidő ellenőrzése"
27="Várjon türelemmel..."
28="DNS sikeresen módosítva lett."
29="DNS feloldó gyorsítótár kiürítése sikeres."
30="Elérési idő:"
31="millisecundum"
32="Helytelen DNS IP!"
33="Kiszolgáló nem érhető el"
34="Hozzáférési hiba"
35="Ismeretlen hiba"
36="IP mező üres!"
37="Helytelen szerver címet adott meg."
38="Az operációs rendszer nem támogatja az IPv6 címzést!"
39="Ez a funkció csak IPv4-hez való."
40="DNS Szerver \n1. DNS \n2. DNS\n1. Eredmény \n2. Eredmény"
41="DNS alkalmazása\nÖsszes kijelölése\nKijelölések visszavonása\n DNS Infó."
42="Turbo megoldás\nKörforgás késleltetési idő.  1és 5000 millisec. közti értéket használhat."
43="Vegyes\nMutassa a vegyes teszt eredményeket"
44="DNS Teszt indítása"
45="DNS Teszt leállítása"
46="DNS Szerver alkalmazása"
47="Várjon..."
48="Hiba:"
49="Általános beállítások\n DNS Lista"
50="Alapértelmezett kapu IP Cím hozzáadása utolsó DNS-ként, (csak Ip v4 esetében)\nha más DNS szerverek nem azt fogják használni."
51="DNS gyorsítótár automatikus takarítása minden egyes DNS változáskor"
52="Hangjelzés használat"
53="Tálca üzenetek bekapcsolása"
54="Fő ablak rejtése indításkor"
55="DnsJumper kicsinyítése a Tálcára (Ikon nézet)"
56="DnsJumper zárása a tálcára"
57="DNS Infó. Link keresés"
58="DNS kereső Link"
59="DnsJumper indítása a rendszerrel"
60="A következő paraméterek alkalmazása a rendszer indításakor"
61="Ipv6 Dns lista megjelenítése"
62="Új DNS Szerver csoport hozzáadása"
63="Kijelölt DNS csoport törlése"
64="Összes lista importálása"
65="Összes lista exportálása"
66="Sor\n DNS Szerver neve\n 1. DNS\n 2. DNS"
67="DNS Szerver:\nElsődleges DNS Szerver:\nMásodlagos DNS Szerver:"
68="Változtatások Mentése"
69="Hozzáad\nDNS hozzáadása vagy törlése"
70="Törlés\n A kijelölt DNS törlése"
71="Hibás paraméter"
72="Elmenti a DNS lista módosításait?"
73="Szöveges dokumentumok"
74="Frissítési Információ:"
75="Frissítési információ:"
76="Új verzió érhető el -  (Program frissítés)\nEllátogat a program honlapjára?"
77="Új frissítés érhető el!\nFrissíti?"
78="Nincs újabb frissítés!"
79="Frissítési hiba!"
80="A %LINK% nem érhető el.\nPróbálja később."
81="A kapott frissítési információ nem megfelelő!\n%LINK%"

[Language_Indonesian_Bahasa Indonesia]
01="Hiday Mlico"
02="Aplikasi ini dirancang untuk memudahkan proses perubahan DNS."
03="Terapkan DNS\n Terapkan Server DNS"
04="DNS tercepat\n Cari DNS Tercepat"
05="Kosongkan DNS\n Pembersihan Tembolok DNS"
06="Opsi\n Menu Opsi"
07="&Pembaruan ...\n &Pengaturan\n &Donasi\n &Beranda\n &Kontak\n &Tentang"
08="&Tampilkan DnsJumper\n &Bantuan\n K&eluar dari DnsJumper"
09="Donasi\n Silahkan Donasi untuk proyek baru kami!"
10="Pilih Adaptor Jaringan"
11="Semua Adaptor Jaringan"
12="Adaptor Jaringan Tidak Ditemukan"
13="Segarkan"
14="Buka Koneksi Jaringan"
15="Konfigurasi Cepat"
16="DNS Asal\n Pulihkan DNS\n Cadangkan DNS"
17="Pilih Server DNS"
18="DNS Asal\n DNS Cadangan\n DNS Kostum"
19="Gunakan  DNS IPv6\n Opsi IPv6"
20="Grup DNS"
21="Daftar DNS Asal\n Daftar DNS Yang Aman\nDaftar DNS Keluarga Aman"
22="Opsi DNS\nTambah, Hapus Atau Ubah DNS"
23="Isi atau Salin alamat DNS"
24="Isi Server DNS\n Info DNS Pertama\n Info DNS Kedua\n Salin Server DNS"
25="Server DNS Kustom\n Masukkan Server DNS Kustom"
26="Periksa DNS\n Periksa Waktu Penyelesaian"
27="Tunggu Sebentar ..."
28="DNS berhasil diubah!"
29="Penyelesai Tembolok DNS Berhasil Dikosongkan."
30="Waktu penyelesaian:"
31="milidetik"
32="IP DNS Salah!"
33="Host tidak terjangkau"
34="Kesalahan akses"
35="Kesalahan tak dikenal"
36="Kotak IP kosong!"
37="Anda memasukkan alamat server yang salah."
38="Sistem operasi tidak mendukung pengalamatan ipv6!"
39="Fitur ini hanya untuk IPv4."
40="Nama Server DNS\n DNS 1\n DNS 2\n Hasil 1\n Hasil 2"
41="Terapkan DNS\n Tandai Semua\n Hapus Semu Tanda\n Info DNS"
42="Penyelesaian Turbo\n Putaran penundaan waktu perjalanan. Anda dapat menggunakan nomor antara 1 dan 5000 milidetik."
43="Dicampur\n Tampilkan hasil tes yang dicampur"
44="Mulai Uji DNS"
45="Hentikan Uji DNS"
46="Terapkan Server DNS"
47="Tunggu"
48="Kesalahan:"
49="Pengaturan Umum\n Daftar DNS"
50="Tambahkan Alamat IP Gateway Standar sebagai DNS terakhir, (Hanya untuk Ipv4)\n Jika server DNS lain gagal ia akan digunakan"
51="Bersihkan Tembolok DNS secara otomatis pada setiap pergantian DNS"
52="Mainkan Suara"
53="Hidupkan Pesan Baki Sistem"
54="Menyembunyikan jendela utama pada saat pengaktifan"
55="Minimalkan DnsJUmper ke baki sistem"
56="Tutup DnsJumper ke baki sistem"
57="Cari Tautan Info DNS"
58="Cari Tautan DNS"
59="Mulai DnsJumper Pada pengaktifan sistem"
60="Terapkan parameter berikut pada pengaktifan sistem"
61="Tampilkan Daftar Dns Ipv6"
62="Tambah Grup Server DNS baru"
63="Hapus DNS Grup Terpilih"
64="Impor Semua Daftar"
65="Ekspor Semua Daftar"
66="Baris\n Nama Server DNS\n DNS 1\n DNS 2"
67="Nama Server DNS:\n Server DNS Pertama:\n Server DNS Kedua:"
68="Simpan Perubahan"
69="Tambah\n Tambah Atau Ubah DNS"
70="Hapus\n Hapus DNS Terpilih"
71="Parameter yang salah"
72="Apakah Anda ingin menyimpan perubahan dari daftar DNS?"
73="Dokumen Teks"
74="Tidak dapat menulis file!"
75="Info Pembaruan:"
76="Versi baru ditemukan (Pembaruan Program yang tersedia)\nApakah Anda ingin mengunjungi situs program?"
77="Pembaruan baru ditemukan!\nApakah Anda ingin memperbarui?"
78="Tidak ada pembaruan baru ditemukan!"
79="Kesalahan Pembaruan!"
80="%LINK% Tidak Tersedia.\nSilahkan Coba Lagi Nanti."
81="Informasi pembaruan yang diterima tidak benar!\n%LINK%"

[Language_Italian_Italiano]
01="Marcello"
02="Questa applicazione è progettata per semplificare\nla modifica degli indirizzi DNS."
03="Applica DNS\n Applica DNS Server"
04="DNS più veloci\n Cerca DNS più veloci"
05="Svuota DNS\n Svuota la Cache DNS"
06="Opzioni\n Menu opzioni"
07="&Aggiornamenti...\n &Impostazioni\n &Donazioni\n &HomePage\n &Contatti\n &Informazioni su"
08="&Visualizza DnsJumper\n &Guida\n E&sci da DnsJumper"
09="Invia donazione\n Invia donazione per i nostri nuovi progetti!"
10="Seleziona una scheda di rete"
11="Tutte le schede di rete"
12="Scheda di rete non trovata"
13="Aggiorna"
14="Apri Connessioni di Rete"
15="Configurazione Veloce"
16="DNS Predefiniti\n Ripristina DNS\n Salva DNS"
17="Seleziona un Server DNS"
18="DNS Predefiniti\n DNS salvati\n DNS personali"
19="Utilizza DNS IPv6\n Opzioni IPv6"
20="Gruppi DNS"
21="Lista DNS predefinita\n Lista DNS sicuri\nLista DNS sicuri per famiglia"
22="Opzioni DNS\nAggiungi, Elimina o Modifica DNS"
23="Sfoglia o copia indirizzo DNS"
24="Sfoglia server DNS\n Informazioni primo DNS\n Informazioni secondo DNS\n Copia server DNS"
25="Server DNS personale\n Immetti Server DNS personale"
26="Verifica DNS\n Verifica Tempi Risposta"
27="Attendi..."
28="DNS applicato!"
29="Cache svuotata"
30="Tempo di risposta:"
31="millisecondi"
32="IP DNS non corretto!"
33="Host non raggiungibile"
34="Errore di accesso"
35="Errore sconosciuto"
36="Indirizzo IP non specificato!"
37="Hai inserito un indirizzo non valido."
38="Il sistema operativo non supporta indirizzi IPv6!"
39="Caratteristica disponibile solo per IPv4."
40="Nome del Server DNS\n DNS 1\n DNS 2\n Risultato 1\n Risultato 2"
41="Applica DNS\n Seleziona tutti\n Deseleziona Tutti\n DNS Info"
42="Turbo Risposta\n Tempo di ritardo andata e ritorno. E' possibile utilizzare un numero tra 1 e 5000 millisecondi."
43="Misto\n Visualizza i risultati del test misto"
44="Inizia test DNS"
45="Ferma test DNS"
46="Applica Server DNS"
47="Attendi"
48="Errore:"
49="Impostazioni generali\n Lista DNS"
50="Aggiungi l'indirizzo IP predefinito del Gateway come ultimo DNS (solo per IPv4). \n Verrà utilizzato se altri server DNS non rispondono."
51="Svuota automaticamente cache DNS ad ogni cambio di DNS"
52="Esegui suono"
53="Attiva notifiche"
54="Nascondi finestra principale all'avvio di Windows"
55="Minimizza DnsJumper nella barra di stato"
56="Chiudi DnsJumper nella barra di stato"
57="Cerca informazioni DNS"
58="Ricerca DNS"
59="Esegui DnsJumper all'avvio di Windows"
60="Applica i parametri specificati all'avvio di Windows"
61="Visualizza lista DNS IPv6"
62="Aggiungi un nuovo gruppo DNS"
63="Elimina il gruppo DNS selezionato"
64="Importa lista"
65="Esporta lista"
66="Riga\n Nome server DNS\n DNS 1\n DNS 2"
67="Nome server DNS:\n Primo server DNS:\n Secondo server DNS:"
68="Salva modifiche"
69="Aggiungi\n Aggiungi o modifica DNS"
70="Elimina\n Elimina DNS selezionato"
71="Parametri errati"
72="Desideri salvare le modifiche alla lista DNS?"
73="Documento di testo"
74="Impossibile scrivere sul file!"
75="Informazioni aggiornamento"
76="Nuova versione disponibile (aggiornamento programma disponibile)\nVuoi visitare ora il sito web del programma?"
77="Disponibile aggiornamento!\nVuoi aggiornare ora?"
78="Nessun aggiornamento disponibile!"
79="Errore aggiornamento!"
80="%LINK% non è disponibile.\n Riprova più tardi."
81="Informazioni di aggiornamento ricevute in modo errato!\n%LINK%"

[Language_Japanese_日本語]
01="Takahiro"
02="このアプリケーションはDNSプロセスを\n簡単に変更できるように設計されています。"
03="DNSを適用\nDNSサーバを適用"
04="最速DNS\n最速のDNSを探します"
05="DNSをフラッシュ\nDNSキャッシュを削除"
06="設定\n設定メニュー"
07="更新\n設定\n寄付\nホームページ\n連絡\nソフトについて"
08="Dns Jumperを表示\nヘルプ\nDns Jumperを終了"
09="寄付してください\n私達の新たなプロジェクトに寄付してください！"
10="ネットワークアダプタの選択"
11="すべてのネットワークアダプタ"
12="ネットワークアダプタが見つかりません"
13="更新"
14="ネットワーク接続を開く"
15="簡単設定"
16="初期DNS\nDNSを復元\nDNSをバックアップ"
17="DNSサーバを選択"
18="初期DNS\nバックアップ済みDNS\nカスタムDNS"
19="IPv6 DNSを使用\nIPv6オプション"
20="DNSグループ"
21="初期DNSリスト\nセキュアDNSリスト\nファミリーセーフDNSリスト"
22="DNS設定\nDNSを追加, 削除, 編集"
23="DNSアドレスを参照もしくはコピー"
24="DNSサーバを参照\n第一DNS情報\n第二DNS情報\nDNSサーバをコピー"
25="カスタムDNSサーバ\nカスタムDNSサーバを入力"
26="DNSを確認\n解決時間を確認して下さい"
27="しばらくお待ち下さい..."
28="DNSの変更に成功しました！"
29="DNSのリゾルバキャッシュのフラッシュに成功しました。"
30="解決時間:"
31="ミリ秒"
32="不正なDNSのIP！"
33="ホストに到達不可能です"
34="アクセスエラー"
35="不明なエラー"
36="IPボックスが空です！"
37="誤ったサーバアドレスを入力しています。"
38="OSがIPv6アドレッシングをサポートしていません！"
39="この機能はIPv4のためのものです。"
40="DNSサーバ名\nDNS 1\nDNS 2\nResult 1\nResult 2"
41="DNSを適用\n全てにマーク\nすべてのマークを外す\nDNS情報"
42="ターボ解決\n往復遅延時間。1～5000ミリ秒の間で番号を使用することができます。"
43="ミックス\nミックステストの結果を表示"
44="DNSテストを開始"
45="DNSテストを停止"
46="DNSサーバを適用"
47="待機"
48="エラー:"
49="一般的な設定\nDNSリスト"
50="他のDNSサーバが失敗した場合(IPv4のみの場合)に使用されます、\n最後のDNSとしてデフォルトゲートウェイのIPアドレスを追加します。"
51="DNS変更時に自動的に、DNSのキャッシュをクリア"
52="音を鳴らす"
53="トレイのメッセージ"
54="起動時にメインウィンドウを非表示"
55="システムトレイにDns Jumperを最小化"
56="システムトレイからDns Jumperを閉じる"
57="DNS情報へのリンクを検索"
58="DNSルックアップリンク"
59="システム起動時にDns Jumperを起動"
60="システム起動時のパラメータを適用"
61="Ipv6 DNSリストを表示"
62="新しいDNSグループを追加"
63="選択したDNSグループを削除"
64="すべてのリストをインポート"
65="すべてのリストをエクスポート"
66="行\nDNS サーバ名\nDNS 1\nDNS 2"
67="DNSサーバ名:\n第一DNSサーバ:\n第二DNSサーバ:"
68="変更を保存"
69="追加\nDNSを追加もしくは編集"
70="削除\n選択したDNSを削除"
71="不正なパラメータ"
72="DNSリストの変更を保存しますか？"
73="テキスト ドキュメント"
74="ファイルを書き込むことができません！"
75="更新情報:"
76="最新版を発見(プログラムの更新が可能)\nプログラムのwebサイトを訪れますか？"
77="最新版を発見！\n更新しますか？"
78="新たな更新は見つかりませんでした！"
79="更新エラー！"
80="%LINK%は使用できません。\n後ほどお試しください。"
81="受信した情報が正しくありません！\n%LINK%"

[Language_Korean_한국어]
01="Jaehyung Lee"
02="이 응용 프로그램은 \nDNS 변경 작업을 위해 단순한 인터페이스로 제작되었습니다,"
03="DNS 적용\n DNS 서버 적용"
04="가장 빠른 DNS\n 가장 빠른 DNS 검색"
05="DNS 플러시\n DNS 캐시 제거"
06="옵션\n 옵션 메뉴"
07="&업데이트...\n &설정\n &기부하기\n &홈페이지\n &연락처\n &제품 정보"
08="&DnsJumper 표시\n &도움말\n DnsJumper &끝내기"
09="기부하기\n 저희의 새로운 프로젝트를 후원해주세요!"
10="네트워크 어댑터 선택"
11="모든 네트워크 어댑터"
12="네트워크 어댑터를 찾을 수 없습니다."
13="새로 고침"
14="네트워크 연결 열기"
15="빠른 구성"
16="기본 DNS\n DNS 복원\n DNS 백업"
17="DNS 서버 선택"
18="기본 DNS\n DNS 백업\n 사용자 DNS"
19="IPv6 DNS 사용\n IPv6 옵션"
20="DNS 그룹"
21="기본 DNS 목록\n 보안 DNS 목록\n패밀리 안심 DNS 목록"
22="DNS 옵션\nDNS 추가, 삭제 또는 편집"
23="DNS 검색 또는 복사"
24="DNS 서버 검색\n 기본 DNS 정보\n 보조 DNS 정보\n DNS 서버 복사"
25="사용자 DNS 서버\n 사용자 DNS 서버 입력"
26="DNS 확인\n 리졸브 타임 확인"
27="잠시 기다려 주십시오..."
28="DNS가 성공적으로 변경되었습니다!"
29="DNS 리졸버 캐시가 성공적으로 제거되었습니다."
30="리졸브 타임:"
31="msec"
32="잘못된 DNS IP!"
33="호스트에 연결할 수 없습니다."
34="연결 오류"
35="알 수 없는 오류"
36="IP 입력란이 비어 있습니다!"
37="잘못된 서버 주소가 입력되었습니다."
38="작업 시스템이 ipv6 어드레싱을 지원하지 않습니다.!"
39="이 기능은 IPv4 전용 기능입니다."
40="DNS 서버 이름\n DNS 1\n DNS 2\n 결과 1\n 결과 2"
41="DNS 적용\n 모두 체크\n 모두 해제\n DNS 정보"
42="터보 리졸브\n 왕복 지연 시간.  1 ~ 5000 msec 까지의 숫자를 사용할 수 있습니다."
43="혼합\n 혼합 테스트 결과 표시"
44="DNS 테스트 시작"
45="DNS 테스트 중지"
46="DNS 서버 적용"
47="대기"
48="오류:"
49="일반 설정\n DNS 목록"
50="마지막 DNS로 기본 게이트웨이 IP 주소 추가, (IP v4 전용)\n DNS 서버들이 실패되면 기본 게이트웨이 IP가 사용됩니다."
51="각 DNS 변경시 자동으로 DNS 캐시 지우기"
52="소리 재생"
53="트레이 메세지 표시"
54="윈도우 시작시 메인 창 트레이로 숨김"
55="시스템 트레이로 DnsJUmper 최소화"
56="시스템 트레이로 DnsJumper 닫기"
57="DNS 정보 링크 검색"
58="DNS 조회 링크"
59="시스템 시작시 DnsJumper 시작"
60="시스템 시작시 다음의 매개 변수 적용"
61="Ipv6 Dns 목록 표시"
62="새로운 DNS 서버 그룹 추가"
63="선택한 DNS 그룹 삭제"
64="모든 목록 가져오기"
65="모든 목록 내보내기"
66="Row\n DNS 서버 이름\n DNS 1\n DNS 2"
67="DNS 서버 이름:\n 기본 Dns 서버:\n 보조 Dns 서버:"
68="변경 저장"
69="추가\n DNS 추가 또는 편집"
70="삭제\n 선택한 DNS 삭제"
71="잘못된 매개 변수"
72="DNS 목록의 변경 사항을 저장하시겠습니까?"
73="텍스트 문서"
74="파일을 작성할 수 없습니다!"
75="업데이트 정보:"
76="새로운 버전 발견 (프로그램 업데이트 사용 가능)\n프로그램의 웹사이트를 방문하시겠습니까?"
77="새로운 업데이트 발견!\n업데이트하시겠습니까?"
78="새로운 업데이트가 없습니다!"
79="업데이트 오류!"
80="%LINK% 이용 불가.\n나중에 다시 시도하십시오."
81="수신된 업데이트 정보가 잘못되었습니다!\n%LINK%"

[Language_Polish_Polski]
01="Andrzej Mazurkiewicz"
02="Ta aplikacja została zaprojektowana do łatwej\n zamiany serwerów DNS."
03="Zastosuj DNS\n Zastosuj serwer DNS"
04="Najszybszy DNS\n Znajdź najszybszy DNS"
05="Usuń DNS\n Wyczyść pamięć podręczną DNS"
06="Opcje\n Menu opcji"
07="&Aktualizacje ...\n &Ustawienia\n &Wspomóż\n &Strona domowa\n &Kontakt\n &O programie"
08="&Pokaż DnsJumper\n &Pomoc\n Zamknij DnsJumper"
09="Prosimy wspomóż\n Prosimy wspomóż nasze nowe projekty!"
10="Wybierz adapter sieciowy"
11="Wszystkie adaptery sieciowe"
12="Nie odnaleziono adaptera sieciowego"
13="Odśwież"
14="Otwórz połączenia sieciowe"
15="Szybka konfiguracja"
16="Domyślny DNS\n Przywróć DNS\n Zrób kopię DNS"
17="Wybierz serwer DNS"
18="Domyślny DNS\n DNS z kopii\n Wybrany DNS"
19="Użyj DNS IPv6\n Opcje IPv6"
20="Grupy DNS"
21="Lista domyślnych DNS\n Lista bezpiecznych DNS\nLista bezpiecznych DNS rodzinnych"
22="Opcje DNS\nDodaj, Usuń lub edytuj DNS"
23="Wyszukaj lub skopiuj adres DNS"
24="Wyszukaj serwery DNS\n Info o pierwszym DNS\n Info o drugim DNS\n Skopiuj serwery DNS"
25="Dostosuj serwer DNS\n Wprowadź dostosowany serwer DNS"
26="Sprawdź DNS\n Sprawdź czas odpowiedzi"
27="Proszę czekać..."
28="DNS został pomyślnie zmieniony!"
29="Pamięć podręczna DNS Resolvera została pomyślnie wyczyszczona."
30="Czas odpowiedzi:"
31="milisekund"
32="Błędny IP DNS!"
33="Host jest nieosiągalny"
34="Błąd dostępu"
35="Nieznany błąd"
36="Pole IP jest puste!"
37="Został wprowadzony błędny adres serwera."
38="System operacyjny nie obsługuje adresowania ipv6!"
39="Ta funkcja jest tylko dla IPv4."
40="Nazwa serwera DNS\n DNS 1\n DNS 2\n Wynik 1\n Wynik 2"
41="Zastosuj DNS\n Zaznacz wszystko\n Odznacz wszystko\n Info o DNS"
42="Turbo odpowiedź\n Czas opóźnienia w obie strony.  Możesz użyć liczb między 1 a 5000 milisekund."
43="Łączony\n Pokazuje łączone wyniki testu"
44="Uruchom test DNS"
45="Zatrzymaj test DNS"
46="Zastosuj serwer DNS"
47="Zaczekaj"
48="Błąd:"
49="Ustawienia główne\n Lista DNS"
50="Dodaj domyślny adres IP bramy sieciowej jako ostatni DNS, (Tylko dla Ip v4)\n Jeżeli inne serwery DNS zawiodą, zostanie użyty ten ostatni"
51="Automatycznie czyść pamięć podręczną DNS przy każdej zmianie DNS"
52="Odegraj dźwięk"
53="Powiadomienie w trayu wł."
54="Ukryj główne okno przy starcie programu"
55="Zminimalizuj DnsJUmper do systemowego traya"
56="Zamknij DnsJumper do systemowego traya"
57="Wyszukaj link z info o DNS"
58="Link DNS Lookup"
59="Uruchom DnsJumper ze startem systemu"
60="Zastosuj następujące parametry na starcie systemu"
61="Pokaż listę Dns Ipv6"
62="Dodaj nową grupę serwerów DNS"
63="Usuń wybraną grupę serwerów DNS"
64="Zaimportuj całą listę"
65="Wyeksportuj całą listę"
66="Wiersz\n Nazwa serwera DNS\n DNS 1\n DNS 2"
67="Nazwa serwera DNS:\n Pierwszy serwer Dns:\n Drugi serwer Dns:"
68="Zapisz zmiany"
69="Dodaj\n Dodaj lub edytuj DNS"
70="Usuń\n Usuń wybrany DNS"
71="Błędny parametr"
72="Czy chcesz zapisać zmiany na liście DNS ?"
73="Dokumenty tekstowe"
74="Nie można zapisać pliku!"
75="Info o aktualizacji:"
76="Znaleziono nową wersję (Dostępna jest aktualizacja programu)\nCzy chcesz odwiedzić stronę programu?"
77="Znaleziono nową aktualizację!\nZaktualizować teraz?"
78="Brak nowych aktualizacji!"
79="Błąd aktualizacji!"
80="%LINK% jest niedostępny.\nProszę spróbować ponownie później."
81="Otrzymane informacje o aktualizacji są niepoprawne!\n%LINK%"

[Language_Portuguese_Português_Brasileiro]
01="Leandro Sipriano"
02="Este aplicativo foi projetado para simplificar\no processo de mudança do DNS."
03="Aplicar DNS\nAplicar Servidor DNS"
04="DNS Mais Rápido\n Encontrar DNS Mais Rápido"
05="Limpar DNS\n Limpa o cache do DNS"
06="Opções\n Menu de Opções"
07="&Atualizações ...\n &Configurações\n &Doar\n &Página Inicial\n &Contato\n &Sobre"
08="&Mostrar DnsJumper\n &Ajuda\n S&air do DnsJumper"
09="Por Favor Doe\n Por Favor doe para nossos novos projetos!"
10="Selecionar Adaptador de Rede"
11="Todos os Adaptadores de Rede"
12="Adaptador de Rede Não Encontrado"
13="Atualizar"
14="Abrir Conexões de Rede"
15="Configuração Rápida"
16="DNS Padrão\n Restaurar DNS\n Fazer Backup do DNS"
17="Escolha um Servidor DNS"
18="DNS Padrão \n DNS de Backup\n DNS Personalizado"
19="Usar DNS do IPv6\n Opções do IPv6"
20="Grupos de DNS"
21="Lista Padrão de DNS\n Lista de DNS Seguros\nLista de DNS Seguros para Família"
22="Opções de DNS\nAdicionar, Apagar Ou Editar o DNS"
23="Procurar ou Copiar o endereço do DNS"
24="Procurar Servidores DNS\n Info do Primeiro DNS \n Info do Segundo DNS\n Copiar Servidores DNS"
25="Servidor DNS Personalizado\n Insira um Servidor DNS Personalizado"
26="Verificar DNS\n Verificar o Tempo de Resolução"
27="Por Favor, Aguarde..."
28="DNS alterado com sucesso!"
29="O Cache de Resolução do DNS foi limpado com sucesso."
30="Tempo de Resolução:"
31="milisegundos"
32="IP do DNS incorreto!"
33="O host está inalcançável"
34="Erro de acesso"
35="Erro desconhecido"
36="A Caixa do IP está vazia!"
37="Você inseriu um endereço de servidor incorreto."
38="O sistema operacional não suporta endereçamento IPv6!"
39="Esta função é só para IPv4."
40="Nome do Servidor DNS\n DNS 1\n DNS 2\n Resultado 1\n Resultado 2"
41="Aplicar DNS\n Marcar Todos\n Desmarcar Todos\n Info do DNS"
42="Resolução Turbo\n Tempo de atraso de ida e volta. Você pode usar um número entre 1 e 5000 milisegundos."
43="Misturados\n Mostra os resultados dos testes misturados"
44="Iniciar Teste do DNS"
45="Parar Teste do DNS"
46="Aplicar Servidor DNS"
47="Aguarde"
48="Erro:"
49="Configuração Geral\n Lista de DNS"
50="Adicionar o Endereço IP da Porta Padrão como o último DNS, (Só para IPv4)\n Se outros Servidores DNS falharem ele será usado"
51="Limpar o cache do DNS automaticamente a cada mudança de DNS"
52="Reproduzir Som"
53="Mensagens do tray ligadas"
54="Ocultar a janela principal ao inicializar"
55="Minimizar o DnsJumper para a bandeja do sistema"
56="Fechar o DnsJumper para a bandeja do sistema"
57="Procurar Links de Info do DNS"
58="Links de Procura dos DNS"
59="Iniciar o DnsJumper na inicialização do sistema"
60="Aplicar os seguintes parâmetros na inicialização do sistema"
61="Mostrar Lista de Dns do IPv6"
62="Adicionar Novo Grupo de Servidores DNS"
63="Apagar Grupo de DNS Selecionado"
64="Importar Toda a Lista"
65="Exportar Toda a Lista"
66="Fileira\n Nome do Servidor DNS\n DNS 1\n DNS 2"
67="Nome do Servidor DNS:\n Primeiro Servidor DNS:\n Segundo Servidor DNS:"
68="Salvar Mudanças"
69="Adicionar\n Adiciona Ou Edita o DNS"
70="Apagar\n Apagar DNS Selecionado"
71="Parâmetro incorreto"
72="Você deseja salvar as mudanças da lista dos DNS?"
73="Documentos de Texto"
74="Não é possível gravar arquivo!"
75="Info da Atualização:"
76="Nova versão encontrada (Atualização do programa disponível)\nVocê deseja visitar o website do programa?"
77="Nova atualização encontrada!\nVocê deseja atualizar?"
78="Nenhuma nova atualização encontrada!"
79="Erro da Atualização!"
80="O %LINK% esta indisponível.\nPor favor, tente de novo mais tarde."
81="A informação da atualização recebida está incorreta!\n%LINK%"

[Language_Russian_Русский]
01="D."
02="Эта программа создана для упрощения настройки DNS."
03="Применить DNS\nПрименить DNS сервер"
04="Быстрый DNS\nПоиск самого быстрого DNS сервера"
05="Очистка DNS\nСброс и очистка содержимого кэша DNS"
06="Настройки\nНастройки программы"
07="Обновление...\nНастройки\nПоддержать разработчиков\nДомашняя страница\nОбратная связь\nО программе"
08="Показать DNS Jumper\nСправка\nВыйти из программы"
09="Поддержать\nПожалуйста, поддержите наши проекты!"
10="Сетевой адаптер"
11="Все сетевые адаптеры"
12="Сетвой адаптер не найден"
13="Обновить"
14="Открыть Сетевые подключения"
15="Быстрая настройка"
16="Настройки DNS по умолчанию\nВосстановить настройки DNS\nСоздать резевную копию DNS"
17="DNS сервер"
18="По умолчанию\nВосстановить\nНастроить"
19="Использовать IPv6\nНастроить параметры IPv6"
20="Списки DNS серверов"
21="Стандартный список\nБезопасный список\nСемейный список"
22="Добавить, изменить или удалить DNS сервер"
23="Поиск по DNS адресам"
24="Найти информацию о серверах\nРасположение первого DNS\nРасположение второго DNS\nКопировать адреса в буфер обмена"
25="Настроить DNS сервер\nИзменить адрес DNS сервера"
26="Проверка DNS\nПроверить время отклика"
27="Пожалуйста, подождите..."
28="DNS сервер успешно изменен!"
29="Кэш DNS успешно очищен."
30="Время отклика:"
31="мс"
32="Неверный IP-адрес DNS!"
33="Хост недоступен"
34="Ошибка доступа"
35="Неизвестная ошибка"
36="Не введен IP-адрес!"
37="Введен некорректный адрес севера."
38="Эта ОС не поддерживает IPv6!"
39="Эта функция только для IPv4."
40="Имя сервера\nDNS 1\nDNS 2\nРезультат 1\nРезультат 2"
41="Применить DNS\nВыбрать все\nСнять все\nИнформация"
42="Турбо проверка\nОграничить время отклика для ускорения теста (от 1 до 5000 мс.)"
43="Без сортировки\nОтключить сортировку результатов теста"
44="Запустить тест DNS серверов"
45="Остановить тест"
46="Применить DNS сервер"
47="Ожидание"
48="Ошибка:"
49="Основные параметры\nСписки серверов"
50="Добавить IP-адрес шлюза по умолчанию как последний DNS (Только для IPv4)\nБудет испольоваться, если другие DNS сервера недоступны."
51="Автоматически очищать кэш DNS при каждом изменении DNS"
52="Включить звуковые уведомления"
53="Показывать сообщения в области уведомлений"
54="Скрывать главное окно при запуске Windows"
55="Сворачивать программу в область уведомлений"
56="Сворачивать в область уведомлений при закрытии"
57="Сервис поиска информации:"
58="Сервис поиска расположения:"
59="Запускать DNS Jumper при загрузке Windows"
60="Использовать следующие параметры при загрузке:"
61="Показать список серверов IPv6"
62="Добавить новый список"
63="Удалить выбранный список"
64="Восстановить списки серверов"
65="Сохранить списки серверов"
66="№\nИмя сервера\nDNS 1\nDNS 2"
67="Имя сервера\nПервый адрес:\nВторой адрес:"
68="Сохранить изменения"
69="Добавить\nДобавить / изменить DNS сервер"
70="Удалить\nУдалить выбранный DNS сервер"
71="Неверный параметр"
72="Хотите сохранить изменения в списке DNS серверов?"
73="Текстовые документы"
74="Невозможно записать файл!"
75="Информация"
76="Обнаружена новая версия программы!\nХотите открыть домашнюю страницу проекта?"
77="Найдено обновление!\nХотите обновить программу?"
78="Нет доступных обновлений."
79="Ошибка обновления!"
80="Адрес %LINK% недоступен.\nПожалуйста, повторите попытку позже."
81="Получена неверная информация об обновлении!\n%LINK%"

[Language_Slovenian_Slovenščina]
01="Tristi glih"
02="Ta aplikacija je namenjena najti Hiter DNS\n DNS,spreminjanje procesa."
03="Uporabi DNS\n Neuporablja DNS streznik"
04="Najhitrejši DNS\n Poišči najhitreje DNS"
05="Počisti DNS\n Počisti predpomnilnik DNS"
06="Možnosti\nMeni možnosti "
07="&Posodobitve ...\n &Nastavitve\n &Darujte\n &Domača stran\n &Kontakt\n &Izhod"
08="&Pokaži DnsJumper\n &Pomoč\n I&zhod DnsJumper"
09="Prosim Darujte\n Darujte za naše nove projekte!"
10="Izberite omrežno kartico"
11="Vse omrežne kartice"
12="Omrežne kartice ni mogoce najti"
13="Osveži"
14="Odprte omrežne povezave"
15="Hitra Konfiguracija"
16="Privzeti DNS\n Obnovitev DNS\n Varnostne kopije DNS"
17="Izberite strežnik DNS"
18="Privzeti DNS\n Varnostne kopije DNS\n Po meri DNS"
19="Uporabite IPv6 DNS\n IPv6 Možnosti"
20="DNS Skupine"
21="Privzeti DNS Seznam\n Varni DNS Seznam\nZa Varnost Otrok DNS Seznam"
22="DNS Moznosti\nDodajanje, Brisanje Ali Urejanje DNS"
23="Brskanje ali Kopiraj naslov DNS"
24="Brskanje po Streznikih DNS\n Prvi DNS Info\n Drugi DNS Info\n Kopija DNS Strežnikov"
25="Po meri DNS Server\n Vnesite po Meri DNS Strežnik"
26="Preverite DNS\n Preverite odzivni Čas"
27="Prosimo Počakajte..."
28="DNS ste uspešno spremenili!"
29="Uspešno Predpomnilnik DNS."
30="Razrešitveni Čas:"
31="Milisekund"
32="Nepravilno DNS IP!"
33="Host je nedosegljiv"
34="Dostop do napake"
35="Neznana napaka"
36="IP Shramba je prazna!"
37="Vnesli ste napačen naslov strežnika."
38="Operacijski sistem ne podpira IPv6 Naslova!"
39="Ta funkcija je samo za IPv4."
40="DNS Server Ime \n DNS 1 \n DNS 2 \n Rezultat 1 \n Rezultat 2"
41="Uporabi DNS \n Označi vse \n odkljukajte vse \n DNS Info"
42="Turbo Reševanje\n Lahko uporabite številko med 1 in 5000 milisekund."
43="Mešani\n Kaže rezultat testa mešani"
44="Start DNS Test"
45="Stop DNS Test"
46="Uporabi DNS Strežnik"
47="Počakajte"
48="Napaka:"
49="Splošne Nastavitve\n DNS Seznama"
50="Dodaj Privzeti Prehod Naslov IP, kot zadnji DNS, (Samo za Ip v4)\n Če ne drugi DNS strežniki ne bo uporabljen"
51="Počisti DNS samodejno  vsaki spremenjen DNS"
52="Predvajaj zvok"
53="Pladenj sporocila On"
54="Skrij glavne ob zagonu sistema windows"
55="Zmanjšanje DnsJUmper na sistemu windows"
56="Zaprite DnsJumper na sistema windows"
57="Iskanje DNS Info Povezav"
58="DNS Povezava"
59="Začetek DnsJumper  Sistem zagona"
60="Uporabljajo se naslednji parametri ob zagonu sistema"
61="Prikazi Ipv6 Dns Seznam"
62="Dodajte nov Strežnik DNS Skupine"
63="Izbriši Izbrane DNS Skupine"
64="Uvoz Vseh Seznamov"
65="Izvoz Vseh Seznamov"
66="Vrstica\n DNS Strežnik ime\n DNS 1\n DNS 2"
67="DNS Strežnik ime:\n Prvi Strežnik Dns:\n Drugi Strežnik Dns:"
68="Shrani Spremembe"
69="Dodaj\n Dodajanje Ali Urejanje DNS"
70="Brisanje\nIzbriši Izbrani DNS"
71="Nepravilen parameter"
72="Ali Želite shraniti spremembe DNS seznama?"
73="Besedilo Dokumentov"
74="Ne more zapisati datoteke!"
75="Posodobitev Info:"
76="Novo različico je našel (Posodobitev za Program je na voljo)\nŽelite obiskati program na spletni strani?"
77="Nova posodobitev najdena!\nSi Želite posodobiti?"
78="Ni novih posodobitev!"
79="Posodobitve Napaka!"
80="%POVEZAVA% ni na voljo.\nProsimo, poskusite znova pozneje."
81="Prejeta posodobitev ni pravilna!\n%LINK%"

[Language_Spanish_Español]
01="kiketrucker"
02="Esta aplicación está diseñada para simplificar\n  el proceso de cambio de DNS."
03="Aplicar DNS\n Aplicar DNS Server"
04="DNS más rápido\n  Encuentra DNS más rápido"
05="Limpiar DNS\n  Purga la caché DNS"
06="Opciones\n  Menú Opciones"
07="&actualizaciones ...\n  &ajustes\n  &Donar\n  &Página del autor\n  &Contacto\n &About"
08="&Mostrar DnsJumper\n  &Ayuda\n  &Salir  de DnsJumper"
09="Donar\n Por favor dona para nuestros nuevos proyectos!"
10="Seleccionar adaptador de red"
11="Todos los adaptadores de red"
12="No se encuentran adaptadores de red"
13="Actualizar"
14="Abrir conexiones de red"
15="Configuración rápida"
16="DNS por defecto\nRestaurar DNS\nCopia de seguridad del DNS"
17="Elegir un servidor DNS"
18="DNS por defecto\n DNS guardado\n DNS personalizado"
19="Usar IPv6 DNS\n IPv6 Opciones"
20="DNS Grupos"
21="Lista de DNS por defecto\n Lista DNS Seguros\nLista DNS Familia segura"
22="Opciones DNS\nAñadir, Borrar O Editar DNS"
23="Buscar ó Copiar direcciones DNS"
24="Buscar servidores DNS\n Primera Info DNS \n Segunda Info DNS\n Copiar Servidores DNS"
25="Personalizar servidor DNS\n Elegir Servidor DNS personalizado"
26="Chequear DNS\n Chequear tiempo de respuesta"
27="Por Favor Espere..."
28="DNS ha sido cambiado!"
29="Caché DNS ha sido reseteada."
30="Tiempo:"
31="milisegundos"
32="Incorrecta DNS IP!"
33="Host es inalcanzable"
34="Error de acceso"
35="Error desconocido"
36="Campo IP vacio!"
37="Ha escrito dirección incorrecta de servidor."
38="El sistema operativo no soporta el direccionamiento IPv6!"
39="Esta función es sólo para IPv4."
40="DNS Nombre de Servidor\n DNS 1\n DNS 2\n Resultado 1\n Resultado 2"
41="Aplicar DNS\n Marcar Todo\n Desmarcar Todo\n DNS Info"
42="Solución Turbo\n Tiempo de retardo de ida y vuelta. Puede utilizar un número entre 1 y 5.000 milisegundos."
43="Mixtas\n Mostrar los resultados de las pruebas mixtas"
44="Iniciar Test DNS"
45="Detener Test DNS"
46="Aplicar Servidor DNS"
47="General Setting\n DNS List"
48="Error:"
49="Opciones Generales\n Listado DNS"
50="Añadir la Dirección IP de entrada por defecto en último DNS, (Sólo para Ip v4)\n Si falla otros servidores DNS se utilizarán."
51="Borrar caché DNS automáticamente en cada cambio de DNS"
52="Reproducir sonido"
53="Mensajes en bandeja"
54="Ocultar ventanas principales en el arranque"
55="Minimizar DnsJUmper a barra de tareas"
56="Cerrar DnsJumper a la barra de tareas"
57="DNS Lookup Link"
58="Buscar Enlace DNS"
59="Iniciar DnsJumper con el sistema"
60="Aplicar los siguientes parámetros en el inicio del sistema"
61="Ver Listado DNS Ipv6"
62="Añadir nuevo Grupo de Servidores DNS"
63="Borrar Grupo DNS Seleccionado"
64="Importar todas las listas"
65="Exportar todas las listas"
66="Fila\n Nombre de Servidor DNS\n DNS 1\n DNS 2"
67="Nombre de Servidor DNS:\n Primer Servidor Dns:\n Segundo Servidor Dns:"
68="Guardar Cambios"
69="Añadir\n Añadir ó Editar DNS"
70="Borrar\n Borrar DNS Seleccionado"
71="Parámetro incorrecto"
72="¿Quieres guardar los cambios de la lista de DNS?"
73="Documentos de Texto"
74="No se puede escribir archivo!"
75="Actualizar Información:"
76="Nueva versión encontrada (actualización disponible de programa)\n¿Quieres visitar el sitio web del programa?"
77="Nueva actualización encontrada!\n¿Quieres actualizar?"
78="No hay actualizaciones disponibles!"
79="Error de Actualización!"
80="Received update information is incorrect!\n%LINK%"
81="Información sobre la actualización recibida es incorrecta!\n%ENLACE%"

[Language_Swedish_Svenska]
01="Åke Engelbrektson"
02="Detta program är designat för att förenkla\n DNS-byte."
03="Tillämpa DNS\n Tillämpa DNS-server"
04="Snabbast DNS\n Hitta snabbaste DNS-servern"
05="Rensa DNS\n Rensar DNS-cachen"
06="Alternativ\n Programmeny"
07="&Uppdatering...\n &Inställningar\n &Donera\n &Hemsida\n &Kontakt\n &About"
08="&Visa DnsJumper\n &Hjälp\n &Avsluta DnsJumper"
09="Donera tack\n Donera gärna till våra nya projekt!"
10="Välj nätverkskort"
11="Alla nätverkskort"
12="Nätverkskort hittades inte"
13="Uppdatera"
14="Öppna Nätverksanslutningar"
15="Snabbkonfiguration"
16="Standard-DNS\n Återställ DNS\n Säkerhetskopiera DNS"
17="Välj en DNS-server"
18="Standard-DNS\n Säkerhetskopierad DNS\n Anpassad DNS"
19="Använd IPv6-DNS\n IPv6-alternativ"
20="DNS-grupper"
21="Standard DNS-lista\n Säker DNS-lista\nFamiljesäker DNS-lista"
22="DNS-alternativ\nLägg till, ta bort eller redigera DNS"
23="Googla eller kopiera DNS-adress"
24="Googla DNS-servrar\n Primär DNS-info\n Sekundär DNS-info\n Kopiera DNS-adresser"
25="Anpassad DNS-server\n Ange en anpassad DNS-server"
26="Kontrollera DNS\n Kontrollera svarstid"
27="Vänta..."
28="DNS-byte slutfört!"
29="Rensning av DNS-cachen är slutförd."
30="Svarstid:"
31="millisekunder"
32="Felaktigt DNS-IP!"
33="Värddatorn kan inte nås"
34="Åtkomstfel"
35="Okänt fel"
36="IP-fältet är tomt!"
37="Du angav en felaktig IP-adress."
38="Operativsystemet stöder inte ipv6-adressering!"
39="Den här funktionen är endast för IPv4."
40="DNS-servernamn\n DNS 1\n DNS 2\n Resultat 1\n Resultat 2"
41="Tillämpa DNS\n Markera alla\n Avmarkera alla\n DNS-info"
42="Turbomatchning\n Tur och retur fördröjningstid. Du kan använda ett värde mellan 1 och 5000 millisekunder."
43="Blandat\n Visa testresultat blandat"
44="Starta DNS-test"
45="Stoppa DNS-test"
46="Tillämpa DNS-server"
47="Vänta"
48="Fel:"
49="Allmäna inställningar\n DNS-lista"
50="Lägg till IP-adress för standard-gateway som sekundär DNS, (endast för Ip v4)\n Den kommer att användas om andra DNS-servrar misslyckas"
51="Rensa DNS-cache automatiskt vid varje DNS-byte"
52="Spela upp ljud"
53="Systemmeddelande på"
54="Dölj huvudfönstret vid uppstart"
55="Minimera DnsJUmper till meddelandefältet"
56="Stäng DnsJumper till meddelandefältet"
57="Söklänk för DNS-info"
58="Länk för DNS-uppslagning"
59="Starta DnsJumper vid systemstart"
60="Tillämpa följande parametrar vid systemstart"
61="Visa Ipv6 DNS-lista"
62="Lägg till ny DNS-servergrupp"
63="Ta bort markerad DNS-grupp"
64="Importera lista"
65="Exportera lista"
66="Rad\n DNS-servernamn\n DNS 1\n DNS 2"
67="DNS-servernamn:\n Primär DNS-server:\n Sekundär DNS-server:"
68="Spara ändringar"
69="Lägg till\n Lägg till eller redigera DNS"
70="Ta bort\n Ta bort markerad DNS"
71="Felaktig parameter"
72="Vill du spara ändringar i DNS-listan?"
73="Textdokument"
74="Kan inte skriva filen!"
75="Uppdatereingsinfo:"
76="Ny version hittad (programuppdatering tillgänglig)\nVill du besöka programmets webbsida?"
77="Ny uppdatering hittad!\nVill du uppdatera?"
78="Ingen ny uppdatering hittad!"
79="Uppdateringsfel!"
80="%LINK% är inte tillgänglig.\nFörsök senare."
81="Mottagen uppdateringsinformation är felaktig!\n%LINK%"

[Language_Turkish_Türkçe]
01="BlueLife"
02="Bu uygulama, DNS değiştirme işlemini basitleştirmek\n için tasarlanmıştır."
03="Kaydet - Uygula\n Seçilen DNS Sunucusunu Uygular"
04="En Hızlı DNS\n Hızlı Dnsleri Bulmak İçin Test"
05="Flush DNS\n DNS Önbelleğini Temizler"
06="Seçenekler\n Seçenekler Menüsü"
07="&Güncelle ...\n &Ayarlar\n &Bağış Yap\n &Web Sitesi\n &İletişim\n &Hakkında"
08="&DnsJumper'ı Göster\n &Yardım\n DnsJumper'ı &Kapat"
09="Bağış Yapın\n Lütfen Yeni Çalışmalarımıza Maddi Destek Sağlayın."
10="Ağ Bağdaştırıcısını Seç"
11="Tüm Ağ Bağdaştırıcıları"
12="Ağ Bağdaştırıcısı Bulunamadı"
13="Yenile"
14="Ağ Bağlantıları Klasörünü Aç"
15="Hızlı Yapılandırma"
16="DNS - Varsayılan\n DNS - Geri Yükle\n DNS - Yedekle"
17="Dns Sunucusunu Seç"
18="Varsayılan DNS\n Yedeklenen DNS\n Özel DNS"
19="IPv6 DNS Seçenekleri\n IPv6 DNS Seçenekleri"
20="DNS Grubları"
21="Varsayılan DNS Listesi\n Güvenli DNS Listesi\n Aile DNS Listesi"
22="DNS Listesini Düzenle"
23="DNS Adresini Araştır Veya Kopyala"
24="DNS'leri Araştır\n Birinci DNS'in Bilgisi\n Ikinci DNS'in Bilgisi\n DNS'leri Kopyala"
25="Özel DNS Sunucusu\n Özel DNS Sunucusu Girin"
26="DNS'lerin çözümleme sürelerini kontrolet\n DNS Kontrolü"
27="Lütfen Bekleyiniz..."
28="DNS başarıyla değiştirildi."
29="DNS çözme önbelleği başarıyla temizlendi."
30="Çözümleme Süresi"
31="milisaniye"
32="DNS adresi hatalı!"
33="Erişilemiyor"
34="Erişim Hatası"
35="Bilinmeyen hata"
36="DNS kutusu boş!"
37="Girilen DNS adresi hatalı!"
38="Sistem IPv6'yı desteklemiyor!"
39="Bu özellik, sadece IPv4 içindir."
40="Dns Sunucusunun Adı\n DNS 1\n DNS 2\n Sonuç 1\n Sonuç 2"
41="DNS'i Uygula\n Hepsini İşaretle\n İşaretleri Temizle\n DNS Bilgisi"
42="Hızlı Çözümle\n Çözümleme testinde, gönderilen bilginin geri dönüşünü bekleme süresi. 1 - 5000 milisaniye arası bir rakam girebilirsiniz."
43="Karışık\n Sonucu karışık göster"
44="Testi Başlat"
45="Testi Durdur"
46="DNS'i Uygula"
47="Bekle"
48="Hata:"
49="Genel Ayarlar\n DNS Listesi"
50="Son DNS sucucusu olarak ağ geçidinin IP adresini ekle (sadece IPv4 için geçerli)\n Ayarlı DNS'ler çalışmasa internete çıkış yapılan cihazdaki (modemdeki) DNS adresleri kullanılır."
51="DNS önbelleğini otomatik olarak temizle"
52="Sesli uyarılar açık"
53="Tray mesajları açık"
54="Başlangıçta ana pencereyi gizle"
55="Simge durumuna küçültüldüğünde, tray tepsisine gönder"
56="Kapatıldığında, tray tepsisine gönder"
57="DNS adresini araştırma linki"
58="DNS adresinin özelliklerini görüntüleme linki"
59="Sistem açılışında DnsJumper'ı başlat"
60="Sistem açılışında aşağıdaki parametreyi uygula"
61="IPv6 DNS listesini göster"
62="Yeni DNS Grubu Ekle"
63="Seçili DNS Gurubunu Sil"
64="DNS Grubplarını Içe Aktar"
65="DNS Grublarını Farklı Kaydet"
66="Sırası\n Dns Sunucusunun Adı\n DNS 1\n DNS 2"
67="DNS Sunucusunun Adı:\n Birinci DNS Sucucusu:\n Ikinci DNS Sunucusu:"
68="Değişiklikleri Kaydet"
69="Listeye Ekle\n Listeye DNS Ekle Veya Değiştir"
70="Listeden Sil\n Listeden Seçili DNS Adresini Sil"
71="Parametre Hatalı!"
72="Dns listesindeki değişikliklerini kaydetmek istiyormusunuz?"
73="Metin Belegeleri"
74="Dosyaya yazılamıyor!"
75="Güncelleme Bilgisi:"
76="Yeni program versiyonu bulundu!\n Programın web sitesini ziyaret etmek istiyormusunuz?"
77="Yeni güncelleme bulundu!\n Güncelleme yapmak istiyormusunuz?"
78="Güncelleme bulunamadı!"
79="Güncelleme Hatası!"
80="%LINK% adresinden veri alınırken hata oluştu!\n Lütfen daha sonra tekrar deneyin"
81="Alınan güncelleme bilgisi hatalı!\n %LINK%"

[Language_Vietnamese_Tiếng Việt]
01="Nguyễn Việt Thái (sNVTs)"
02="Ứng dụng được thiết kế nhằm đơn giản hóa \nviệc thay đổi DNS"
03="Áp dụng DNS\nÁp dụng DNS máy chủ"
04="DNS nhanh nhất\nTìm DNS nhanh nhất"
05="Dọn DNS\nDọn dẹp lại DNS"
06="Tùy chọn\nMenu tùy chọn"
07="&Cập nhật ...\n&Thiết lập\n&Ủng hộ\nTrang chủ\n&Liên hệ\n&Về tôi"
08="&Hiện DNSJumper\n&Giúp đỡ\nThoát DNSJumer"
09="Vui lòng ủng hộ\nVui lòng ủng hộ dự án mới của chúng tôi!"
10="Chọn Network Adapter"
11="Tất cả Network Adapters"
12="Không tìm thấy Network Adapter"
13="Làm mới"
14="Mở Network Connections"
15="Cấu hình nhanh"
16="DNS mặc định\nPhục hồi DNS\nSao lưu DNS"
17="Chọn máy chủ DNS"
18="DNS mặc định\nSao lưu DNS\nTùy chỉnh DNS"
19="Sử dụng IPv6 DNS\nTùy chọn IPv6"
20="Nhóm DNS"
21="Danh sách mặc định\nDanh sách an toàn\nDanh sách an toàn (Gia đình)"
22="Tuỳ chọn DNS\nThêm, Xóa hoặc Chỉnh sửa DNS"
23="Tìm hoặc sao chép DNS"
24="Tìm các máy chủ DNS\nThông tin DNS 1\nThông tin DNS2\nSao chép máy chủ DNS"
25="Tùy chỉnh máy chủ DNS\nNhập vào máy chủ DNS"
26="Kiểm tra DNS\nKiểm tra thời gian xử lí"
27="Chờ chút..."
28="Thay đổi DNS thành công!"
29="Xử lí bộ nhớ đệm DNS hoàn tất."
30="Thời gian xử lí:"
31="mili giây"
32="Sai DNS IP!"
33="Host is unreachable"
34="Lỗi tiếp cận"
35="Lỗi không xác định"
36="IP trống"
37="Địa chỉ bạn nhập không chính xác"
38="Hệ thống của bạn không hỗ trợ địa chỉ IPv6!"
39="Tính năng này chỉ dành cho IPv4"
40="Tên máy chủ DNS\n DNS 1\n DNS 2\n Kết quả 1\n Kết quả 2"
41="Áp dụng DNS\nĐánh dấu tất cả\nHủy dấu tất cả\nThông tin DNS"
42="Giải quyết nhanh\nThời gian từ 1 đến 5000 giây."
43="Trộn\n Hiện thị kết quả đã trộn"
44="Kiểm tra DNS"
45="Dừng kiểm tra"
46="Áp dụng máy chủ DNS"
47="Chờ chút"
48="Lỗi:"
49="Thiết lập chung\nDanh sách DNS"
50="Thêm cổng vào mặc định cho địa chỉ IP như DNS cuối.(IPv4)\nNếu các DNS khác lỗi nó sẽ được sử dụng"
51="Xóa bộ nhớ đệm DNS tự động khi thay đổi DNS"
52="Mở âm thanh"
53="Mở thông báo khay hệ thống"
54="Ẩn cửa sổ khi khởi động"
55="Thu nhỏ DNSJumper xuống khay hệ thống"
56="Đóng DNSJumper xuống khay hệ thống"
57="Tìm kiếm thông tin DNS"
58="Tra cứu liên kết DNS"
59="Khởi động cùng hệ thống"
60="Áp dụng thông số khi khởi đọng hệ thống"
61="Hiện danh sách Ipv6 Dns"
62="Thêm nhóm DNS mới"
63="Xóa nhóm DNS đã lựa chọn"
64="Nhập danh sách"
65="Xuất danh sách"
66="Hàng\nTên máy chủ DNS\n DNS 1\n DNS 2"
67="Tên máy chủ DNS:\nMáy chủ 1:\nMáy chủ 2:"
68="Lưu thay đổi"
69="Thêm\n Thêm hoặc sửa DNS"
70="Xóa bỏ\n Xóa DNS đã lựa chọn"
71="Sai tham số"
72="Bạn có muốn lưu thây đổi của danh sách"
73="Tài liệu TEXT"
74="Không thể ghi tệp tin!"
75="Thông tin cập nhật:"
76="Tìm thấy phiên bản mới của chương trình!\nBạn có muốn ghé thăm trang WEB?"
77="Có phiên bnar cập nhật mới!\nBạn có muốn cập nhật?"
78="Không có bản cập nhật mới nào!"
79="Lỗi cập nhật!"
80="%LINK% không khả dụng.\nVui lòng thử lại!"
81="Nhận thông tin cập nhật không chính xác\n%LINK%"

[Language_Arabic_العربية]
01="DefaulDefaul"
02="تم تصميم هذا التطبيق لتبسيط عملية تغيير DNS"
03="تطبيق DNS \n تطبيق خادم DNS"
04="أسرع DNS \n البحث أسرع DNS"
05="فلوش DNS \n التطهير وDNS ذاكرة التخزين المؤقت"
06="خيارات \n خيارات قائمة"
07="& التحديثات ... \n وإعدادات \n وتبرع \n وصفحته \n والاتصال \n ومعلومات عن"
08="& مشاهدة DnsJumper \n و المساعدة \n & هاء DnsJumper"
09="يرجى تبرع \n الرجاء التبرع مشاريعنا الجديدة!"
10="حدد محول الشبكة"
11="جميع محولات الشبكة"
12="محول الشبكة غير موجود"
13="تحديث"
14="اتصالات شبكة الاتصال فتح"
15="تكوين خيارات"
16="DNS الافتراضي \n استعادة DNS \n DNS النسخ الاحتياطي"
17="اختيار خادم DNS"
18="DNS افتراضي \n احتياطيا DNS \n DNS مخصص"
19="استخدام الإصدار IPv6 DNS \n ب IPv6 خيارات"
20="المجموعات DNS"
21="قائمة DNS الافتراضي \n الآمنة DNS قائمة \n Family الآمن قائمة DNS"
22="خيارات DNS \n إضافة أو حذف أو تعديل DNS"
23="عنوان DNS تصفح أو نسخ"
24="خوادم DNS تصفح \n خوادم الأولى معلومات DNS \n ثانيا معلومات DNS \n نسخة DNS"
25="DNS خادم مخصص \n أدخل DNS خادم مخصص"
26="تحقق DNS \n التحقق من حل تايم"
27="الرجاء الانتظار ..."
28="DNS تغيرت بنجاح!"
29="مسح بنجاح التخزين المؤقت لمحلل DNS."
30="حل الوقت:"
31="ميلي ثانية"
32="IP DNS غير صحيح!"
33="المضيف غير قابلة للوصول"
34="خطأ الوصول"
35="خطأ غير معروف"
36="مربع IP فارغ!"
37="لقد أدخلت عنوان خادم غير صحيحة."
38="نظام التشغيل لا دعم IPv6 تتناول!"
39="هذه الميزة فقط ل IPv4."
40="DNS اسم الخادم \n DNS 1 \n DNS 2 \n نتيجة 1 \n النتيجة 2"
41="تطبيق DNS \n إجعل كل \n إلغاء تحديد جميع \n DNS معلومات"
42="توربو حل \n المرة تأخير الرحلة. يمكنك استخدام رقم بين 1 و 5000 ميلي ثانية."
43="المختلطة \n عرض نتائج الاختبار مختلطة"
44="اختبار DNS بدء"
45="اختبار DNS إيقاف"
46="تطبيق خادم DNS"
47="انتظر"
48="خطأ:"
49="العام إعداد \n قائمة DNS"
50="إضافة العبارة الافتراضية IP Address لDNS الماضي، (فقط لايب V4) \n إذا خوادم DNS أخرى يفشل سيتم استخدامها"
51="مخبأ DNS واضح تلقائيا على كل تغيير DNS"
52="تشغيل الصوت"
53="رسائل علبة في"
54="إخفاء النوافذ الرئيسية عند بدء التشغيل"
55="تصغير DnsJUmper لعلبة النظام"
56="DnsJumper بالقرب من علبة النظام"
57="بحث DNS معلومات لينك"
58="بحث DNS لينك"
59="ابدأ DnsJumper على بدء تشغيل النظام"
60="تطبيق المعلمات التالية عند بدء تشغيل النظام"
61="إظهار قائمة IPv6 أن نظام أسماء النطاقات"
62="إضافة مجموعة جديدة خادم DNS"
63="مجموعة DNS حذف المحدد"
64="استيراد جميع قائمة"
65="تصدير جميع قائمة"
66="الصف \n DNS اسم الخادم \n DNS 1 \n DNS 2"
67="اسم خادم DNS: \n DNS الأول الخادم: \n DNS الثاني الخادم:"
68="حفظ التغييرات"
69="إضافة \n إضافة أو تعديل DNS"
70="حذف \n حذف DNS مختارة"
71="المعلمة غير صحيحة"
72="هل تريد حفظ التغييرات في قائمة DNS؟"
73="وثائق النص"
74="غير قادر على كتابة ملف!"
75="تحديث معلومات"
76="نسخة جديدة (تحديث البرنامج متاح) وجدت \n هل ترغب في زيارة موقع البرنامج؟"
77="تحديث جديد موجود! \n هل تريد تحديث؟"
78="لا التحديث الجديد موجود!"
79="تحديث خطأ!"
80="٪ LINK٪ غير متوفرة. \n الرجاء المحاولة مرة أخرى في وقت لاحق."
81="معلومات التحديث تلقيت غير صحيحة \n٪ LINK!٪"

[Language_Persian_فارسی]
01="Esmaeil Yarahmadi"
02="این نرم افزار به سادگی دی ان اس را تغییر می دهد"
03=" DNSثبت\n سرور DNS ثبت"
04=" DNSسریعترین\n DNS پیدا کردن سریع"
05=" DNSپاکسازی\n پاک کردن کش دی ان اس"
06="تنظیمات\n منوی تنظیمات"
07="&به روز رسانی  ...\n &تنظیمات \n &کمک مالی \n &خانه\n &تماس\n &درباره"
08="& DnsJumper نمایش\n &کمک\n &  DnsJumper خروج از "
09="کمک مالی\n جهت انجام پروژهای جدید نیاز به کمک مالی است!"
10="انتخاب کارت شبکه"
11="تمامی کارت شبکه
12="کارت شبکه پیدا نشد"
13="بازسازی"
14="باز کردن کانکشن"
15="تنظیمات سریع"
16="پیش فرض DNS\n  DNSبازگرداندن \n  DNS پشتیبان گیری از"
17="سرورDNSانتخاب "
18="پیش فرض DNS\n  انجام شد DNS پشتیبان گیری از\n دستی DNS"
19="استفاده  IPv6 DNS\n IPv6 تنظیمات"
20="DNS گروهی"
21="لیست پیش فرض DNS \n Secure DNS List\n لیست امن  DNS "
22="DNS تنظیمات\n  DNSاضافه حذف یا ویرایش "
23=" DNS فهرست یا کپی آدرس"
24="سرور ها DNS فهرست \n  DNS اطلاعات اولیه\n  DNS اطلاعات ثانویه\n  DNS کپی سرورهای"
25="سرور دستی DNS \n  DNS وارد کردن یک مقدار دستی"
26=" DNSچک کردن\n چک کردن مدت زمان درخواست"
27="منتظر بمانید..."
28=" بدرستی تغییر یافتDNS "
29="پاکسازی حافظه به درستی انجام شد."
30="مدت زمان درخواست:"
31="میلی ثانیه"
32="صحیح نیست DNS IP!"
33="هاست در دسترس نیست"
34="خطای اطلاعات"
35="خطای ناشناخته"
36="فیلد ای پی خالی است!"
37="آدرس وارد شده صحیح نمی باشد."
38="راپشتیبانی بکندIPV6 سیستم نمی تواند آدرس"
39="می باشد IPv4 این خصوصیات فقط برای "
40="سرور DNS تام\n DNS 1\n DNS 2\n نتیجه 1\n نتیجه2"
41=" DNS ثبت \n انتخاب همه\n عدم انتخاب همه\n DNS اطلاعات "
42="درخواست سریع\n زمان تاخیر ارسال و دریافت . شما می توانید اعداد بین  1  و   5000  میلی ثانیه را انتحاب نمائبد."
43="Mixed\n نمایش جزئیات جستجو "
44=" DNS شروع تست"
45="DNS توقف تست"
46="سرور DNS ثبت"
47="منتظر"
48="خطا:"
49="تنظیمات پایه\n DNS لیست"
50="پیش فرض برای قبلی Gateway اضافه کردن, ( Ip v4 فقط برای)\n  خطا داد می توانید از این استفاده بنمائید DNS اگر سایر "
51="زمانی که دی ان اس تغییر کرد حافظه هم بصورت اتوماتیک پاک شود"
52="پخش صدا"
53="پیغام ها در نوار ابزار مشاهده شود"
54="در شروع به کار ویندوز مخفی بمان"
55="کوچک کردن برنامه در نوار ابزار"
56="برنامه  را در نوار ابزار را ببند"
57=" DNS لینک جستجو اطلاعات"
58="DNS مشاهده لینک"
59="اجرا برنامه در شروع به کار ویندوز"
60="ثبت نوع دی ان اس در شروع بکار ویندوز"
61=" Ipv6 Dnsنشان دادن لیست "
62=" DNSاضافه کردن گروهی"
63="پ انتخاب شده DNS اک کردن گروهی"
64="وارد کردن تمامی لیست"
65="صادر کردن تمامی لیست"
66="ردیف\n سرور DNS نام\n DNS 1\n DNS 2"
67="سرور DNS نام :\n  Dnsاولین :\n  Dns دومین
68="ثبت تغییرات"
69="اضافه\n DNS اضافه یا ویرایش"
70="حذف\n انتخاب شده DNS حذف"
71="پارامتر صحیح نمی باشد"
72="آیا تمایل دارید تغییرات در لیست ثبت بشود?"
73="اسناد متنی"
74="فعال بودن جهتنوشتن بروی فایل!"
75="اطلاعات آپدیت:"
76="ورژن جدید (برنامه آپدیت موجود می باشد)و\nتمایل به مشاهده برنامه در سایت سازنده دارید?"
77="به روز رسانی موجود است!\nبه روز رسانی انجام شود ?"
78="به روز رسانی جدیدی مشاهده نگردید!"
79="خطا در به روز رسانی!"
80="%LINK% در دسترس نیست.\n لطفا بعداً مجدد سعی بنمائید."
81="خطا در دریافت اطلاعات به روز رسانی!\n%LINK%"

[Language_Croatian_Hrvatski]
01="Lino Kolina"
02="Ovaj program pojednostavljuje\n postupak promjene DNS."
03="Primjeni DNS\n Primjeni DNS Server"
04="Najbrži DNS\n Nađi najbrži DNS"
05="Očisti DNS\n Očisti DNS Predmemoriju"
06="Postavke\n Meni postavki"
07="Nadogradnje ...\nPostavke\nDonacije\nNaslovnica\nKontakt\nO"
08="Prikaži DnsJumper\n Pomoć\n Izlaz iz DnsJumper"
09="Molimo Darujte\n Darujte za naše nove projekte!"
10="Odaberi Mrežni Adapter"
11="Svi Mrežni Adapteri"
12="Mrežni Adapter nije nađen"
13="Osvježi"
14="Otvori Mrežne Veze"
15="Brze postavke"
16="Početni DNS\n Vrati DNS\n Rezervni DNS"
17="Odaberi DNS Server"
18="Početni DNS\n Spremljeni DNS\n Ručni DNS"
19="Koristi IPv6 DNS\n IPv6 Postavke"
20="DNS Grupe"
21="Početna DNS Lista\n Sigurna DNS Lista\nObiteljska Sigurna DNS Lista"
22="DNS Postavke\nDodaj, obriši ili uredi DNS"
23="Nađi ili kopiraj DNS adrese"
24="Nađi DNS Servere\n Informacije o Prvom DNS\n Informacije o Drugom DNS\n Kopiraj DNS Servere"
25="Ručni DNS Server\n Dodaj Ručni DNS Server"
26="Provjeri DNS\n Provjeri vrijeme razriješenja"
27="Pričekaj..."
28="DNS je uspješno promijenjen!"
29="Uspješno Očišćena DNS Predmemorija."
30="Vrijeme razriješenja:"
31="milisekunde"
32="Netočan DNS IP!"
33="Domaćin je nedostupan"
34="Greška Pristupa"
35="Nepoznata Greška"
36="Ip okvir je prazan!"
37="Unijeli ste netočne server adrese."
38="Operativni sustav Ne Podržava IPv6! adresiranje!"
39="Ova funkcija je samo za IPv4."
40="Ime DNS Servera\n DNS 1\n DNS 2\n Rezultat 1\n Rezultat 2"
41="Koristi DNS\n Označi Sve\n Odznači Sve\n Informacije o DNS"
42="Turbo Provjera\n Odaberite borj između 1 and 5000 milisekunda."
43="Miješano\n Prikaži rezultat miješanog testa"
44="Započni DNS Test"
45="Zaustavi DNS Test"
46="Koristi DNS Server"
47="Pričekaj"
48="Greška:"
49="Opće Postavke\n DNS Lista"
50="Dodaj Default Gateway IP Adresu kao zadnji DNS, (Samo za Ip v4)\n Ako drugi DNS serveri izbace grešku on će biti korišten"
51="Očisti DNS Predmemoriju kod svake promijene DNSa"
52="Sviraj zvuk"
53="Poruke u traci sustava Uključene"
54="Sakrij glavne prozore pri pokretanju"
55="Smanji DNS Jumper u traku sustava"
56="Zatvori DNS Jumper u traku sustava"
57="Potraži Informacije o DNS vezi"
58="Potraži DNS vezu"
59="Pokrenite DNS Jumper kod pokretanja sustava"
60="Primijenite sljedeće parametre pri pokretanju sustava"
61="Izlistaj Ipv6 Grupe"
62="Dodaj Novu DNS Grupu"
63="Obriši odabrane DNS Grupe"
64="Uvezi sve Liste"
65="Izvezi sve Liste"
66="Stupac\n Ime DNS Servera\n DNS 1\n DNS 2"
67="Ime DNS Servera:\n Prvi Dns Server:\n Drugi Dns Server:"
68="Spremi promjene"
69="Dodaj\n Dodaj ili uredi DNS"
70="Obriši\n Obriši odabrane DNS"
71="Neispravan parametar"
72="Želite spremiti promijene u DNS listi?"
73="Tekstualni dokumenti"
74="Ne mogu zapisati u datoteku!"
75="Info o Nadogradnji:"
76="Nova verzija nađena (Nadogradnja programa dostupna)\nŽelite posjetiti webstranicu programa?"
77="Nova Nadogradnja nađena!\nŽelite Nadograditi program?"
78="Nema novih Nadogradnji!"
79="Greška kod Nadogradnje!"
80="%LINK% je nedostupan.\nMolimo pokušajte kasnije."
81="Pogrešan link preuzimanja!\n%LINK%"

[Language_Serbian_Srpski]
01="DDedic"
02="Ovaj program pojednostavljuje\n postupak promene DNSa."
03="Primeni DNS\n Primeni DNS Server"
04="Najbrži DNS\n Nađi najbrži DNS"
05="Očisti DNS\n Očisti DNS Keš memoriju"
06="Podešavanja\n Meni podešavanja"
07="Nadogradnje ...\nPodešavanja\nDonacije\nNaslovna\nKontakt\nO"
08="Prikaži DnsJumper\n Pomoć\n Izlaz iz DnsJumper"
09="Molimo Donirajte\n Donirajte za naše nove projekte!"
10="Odaberi Mrežni Adapter"
11="Svi Mrežni Adapteri"
12="Mrežni Adapter nije pronađen"
13="Osveži"
14="Otvori Mrežne Veze"
15="Brza podešavnja"
16="Početni DNS\n Vrati DNS\n Rezervni DNS"
17="Odaberi DNS Server"
18="Početni DNS\n Spremni DNSovi\n Ručni DNS"
19="Koristi IPv6 DNS\n IPv6 Postavke"
20="DNS Grupe"
21="Početna DNS Lista\n Sigurna DNS Lista\nPorodična Sigurna DNS Lista"
22="DNS Podešavanja\nDodaj, obriši ili uredi DNS"
23="Nađi ili kopiraj DNS adrese"
24="Nađi DNS Servere\n Informacije o Prvom DNS\n Informacije o Drugom DNS\n Kopiraj DNS Servere"
25="Ručni DNS Server\n Dodaj Ručni DNS Server"
26="Proveri DNS\n Proveri vreme razrešenja"
27="Pričekaj..."
28="DNS je uspešno promenjen!"
29="Uspešno Očišćena DNS Keš memorija."
30="Vreme razrešenja:"
31="milisekunde"
32="Netačan DNS IP!"
33="Domaćin je nedostupan"
34="Greška Pristupa"
35="Nepoznata Greška"
36="Ip opseg je prazan!"
37="Uneli ste netačnu adresu servera."
38="Operativni sistem Ne Podržava IPv6! adresiranje!"
39="Ova funkcija je samo za IPv4."
40="Ime DNS Servera\n DNS 1\n DNS 2\n Rezultat 1\n Rezultat 2"
41="Koristi DNS\n Označi Sve\n Odznači Sve\n Informacije o DNS"
42="Turbo Provera\n Odaberite broj između 1 i 5000 milisekundi."
43="Mešovito\n Prikaži rezultate mešovitog testa"
44="Započni DNS Test"
45="Zaustavi DNS Test"
46="Koristi DNS Server"
47="Sačekaj"
48="Greška:"
49="Opšta Podešavanja\n DNS Lista"
50="Dodaj Default Gateway IP Adresu kao zadnji DNS, (Samo za Ip v4)\n Ako drugi DNS serveri izbace grešku on će biti korišćen"
51="Očisti DNS Keš memoriju kod svake promene DNSa"
52="Uključi zvuk"
53="Poruke u taskbaru sistema Uključene"
54="Sakrij glavne prozore pri pokretanju"
55="Smanji DNS Jumper u taskbar sistema"
56="Zatvori DNS Jumper u taskbaru sistema"
57="Potraži Informacije o DNS vezi"
58="Potraži DNS vezu"
59="Pokrenite DNS Jumper prilikom pokretanja sistema"
60="Primenite sledeće parametre prilikom pokretanju sistema"
61="Izlistaj Ipv6 Grupe"
62="Dodaj Novu DNS Grupu"
63="Obriši odabrane DNS Grupe"
64="Uvezi sve Liste"
65="Izvezi sve Liste"
66="Kolona\n Ime DNS Servera\n DNS 1\n DNS 2"
67="Ime DNS Servera:\n Prvi Dns Server:\n Drugi Dns Server:"
68="Snimi promene"
69="Dodaj\n Dodaj ili uredi DNS"
70="Obriši\n Obriši odabrane DNSove"
71="Neispravan parametar"
72="Želite li snimiti promene u DNS listi?"
73="Tekstualni dokumenti"
74="Nemoguć je upis u datoteku!"
75="Info o Nadogradnji:"
76="Nova verzija je pronađena (Nadogradnja programa je dostupna)\nŽelite li posetiti webstranicu programa?"
77="Nova Nadogradnja je pronađena!\nŽelite li da nadogradite program?"
78="Nema novih Nadogradnji!"
79="Greška kod Nadogradnje!"
80="%LINK% je nedostupan.\nMolimo pokušajte kasnije."
81="Pogrešan link preuzimanja!\n%LINK%"

Virus Scan Results

DnsJumper.exe (aedbaa8d63ef) - ## / 61
dnsjumper.2.1.nupkg (f679471a9e4e) - ## / 59

In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).

Chocolatey Pro provides runtime protection from possible malware.

Version History

Add to Builder	Version	Downloads	Last Updated	Status
	Dns Jumper 2.2	2510	Tuesday, April 7, 2020	Approved
	Dns Jumper 2.1	1499	Sunday, March 26, 2017	Approved

Freeware

Release Notes

See changelog

Dependencies

This package has no dependencies.

Discussion for the Dns Jumper Package

Ground Rules:

This discussion is only about Dns Jumper and the Dns Jumper package. If you have feedback for Chocolatey, please contact the Google Group.
This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
Tell us what you love about the package or Dns Jumper, or tell us what needs improvement.
Share your experiences with the package, or extra configuration or gotchas that you've found.
If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.

Resources

Events

Courses

4,389

1,499

26 Mar 2017

Dns Jumper

Dns Jumper 2.1

Some Checks Have Failed or Are Not Yet Complete

Deployment Method: Individual Install, Upgrade, & Uninstall

Deployment Method:

1. Enter Your Internal Repository Url

2. Setup Your Environment

1. Ensure you are set for organizational deployment

2. Get the package into your environment

3. Copy Your Script

4. If applicable - Chocolatey configuration/installation

Ground Rules: