Downloads of v 1.5.116:


Last Update:

04 Feb 2021

Package Maintainer(s):

Software Author(s):



admin usb format boot cross-platform foss balena etcher balenaetcher img flasher dd write sd


This is not the latest version of Etcher available.

  • 1
  • 2
  • 3

1.5.116 | Updated: 04 Feb 2021



Downloads of v 1.5.116:



Software Author(s):


  • 1
  • 2
  • 3
Etcher 1.5.116

This is not the latest version of Etcher available.

  • 1
  • 2
  • 3

All Checks are Passing

3 Passing Tests

Validation Testing Passed

Verification Testing Passed


Scan Testing Successful:

No detections found in any package files

Learn More

Deployment Method: Individual Install, Upgrade, & Uninstall

To install Etcher, run the following command from the command line or from PowerShell:


To upgrade Etcher, run the following command from the command line or from PowerShell:


To uninstall Etcher, run the following command from the command line or from PowerShell:


Deployment Method:

📝 NOTE: This applies to both open source and commercial editions of Chocolatey.

1. Enter Your Internal Repository Url

(this should look similar to

2. Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

  • Open Source or Commercial:
    • Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
    • You can also just download the package and push it to a repository Download

3. Copy Your Script

choco upgrade etcher -y --source="'INTERNAL REPO URL'" --version="'1.5.116'" [other options]

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:

choco upgrade etcher -y --source="'INTERNAL REPO URL'" --version="'1.5.116'" 

Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
  Exit 0

Exit $exitCode

- name: Install etcher
    name: etcher
    version: '1.5.116'
    state: present

See docs at

chocolatey_package 'etcher' do
  action    :install
  source   'INTERNAL REPO URL'
  version  '1.5.116'

See docs at

cChocoPackageInstaller etcher
    Name     = "etcher"
    Version  = "1.5.116"
    Source   = "INTERNAL REPO URL"

Requires cChoco DSC Resource. See docs at

package { 'etcher':
  ensure   => '1.5.116',
  provider => 'chocolatey',
  source   => 'INTERNAL REPO URL',

Requires Puppet Chocolatey Provider module. See docs at

4. If applicable - Chocolatey configuration/installation

See infrastructure management matrix for Chocolatey configuration elements and examples.

This package was approved as a trusted package on 04 Feb 2021.


Etcher is a powerful OS image flasher built with web technologies to ensure flashing an SDCard or USB drive is a pleasant and safe experience. It protects you from accidentally writing to your hard-drives, ensures every byte of data was written correctly and much more.


  • Validated Burning
    No more writing images on corrupted cards and wondering why your device isn't booting.
  • Hard Drive Friendly
    Makes drive selection obvious to avoid wiping your entire hard-drive
  • Beautiful Interface
    Who said burning SD cards has to be an eyesore.
  • Open Source
    Made with JS, HTML, node.js and Electron. Dive in and contribute!
  • Cross Platform
    Works for everyone, no more complicated install instructions.


                              Apache License
                        Version 2.0, January 2004


1. Definitions.

   "License" shall mean the terms and conditions for use, reproduction,
   and distribution as defined by Sections 1 through 9 of this document.

   "Licensor" shall mean the copyright owner or entity authorized by
   the copyright owner that is granting the License.

   "Legal Entity" shall mean the union of the acting entity and all
   other entities that control, are controlled by, or are under common
   control with that entity. For the purposes of this definition,
   "control" means (i) the power, direct or indirect, to cause the
   direction or management of such entity, whether by contract or
   otherwise, or (ii) ownership of fifty percent (50%) or more of the
   outstanding shares, or (iii) beneficial ownership of such entity.

   "You" (or "Your") shall mean an individual or Legal Entity
   exercising permissions granted by this License.

   "Source" form shall mean the preferred form for making modifications,
   including but not limited to software source code, documentation
   source, and configuration files.

   "Object" form shall mean any form resulting from mechanical
   transformation or translation of a Source form, including but
   not limited to compiled object code, generated documentation,
   and conversions to other media types.

   "Work" shall mean the work of authorship, whether in Source or
   Object form, made available under the License, as indicated by a
   copyright notice that is included in or attached to the work
   (an example is provided in the Appendix below).

   "Derivative Works" shall mean any work, whether in Source or Object
   form, that is based on (or derived from) the Work and for which the
   editorial revisions, annotations, elaborations, or other modifications
   represent, as a whole, an original work of authorship. For the purposes
   of this License, Derivative Works shall not include works that remain
   separable from, or merely link (or bind by name) to the interfaces of,
   the Work and Derivative Works thereof.

   "Contribution" shall mean any work of authorship, including
   the original version of the Work and any modifications or additions
   to that Work or Derivative Works thereof, that is intentionally
   submitted to Licensor for inclusion in the Work by the copyright owner
   or by an individual or Legal Entity authorized to submit on behalf of
   the copyright owner. For the purposes of this definition, "submitted"
   means any form of electronic, verbal, or written communication sent
   to the Licensor or its representatives, including but not limited to
   communication on electronic mailing lists, source code control systems,
   and issue tracking systems that are managed by, or on behalf of, the
   Licensor for the purpose of discussing and improving the Work, but
   excluding communication that is conspicuously marked or otherwise
   designated in writing by the copyright owner as "Not a Contribution."

   "Contributor" shall mean Licensor and any individual or Legal Entity
   on behalf of whom a Contribution has been received by Licensor and
   subsequently incorporated within the Work.

2. Grant of Copyright License. Subject to the terms and conditions of
   this License, each Contributor hereby grants to You a perpetual,
   worldwide, non-exclusive, no-charge, royalty-free, irrevocable
   copyright license to reproduce, prepare Derivative Works of,
   publicly display, publicly perform, sublicense, and distribute the
   Work and such Derivative Works in Source or Object form.

3. Grant of Patent License. Subject to the terms and conditions of
   this License, each Contributor hereby grants to You a perpetual,
   worldwide, non-exclusive, no-charge, royalty-free, irrevocable
   (except as stated in this section) patent license to make, have made,
   use, offer to sell, sell, import, and otherwise transfer the Work,
   where such license applies only to those patent claims licensable
   by such Contributor that are necessarily infringed by their
   Contribution(s) alone or by combination of their Contribution(s)
   with the Work to which such Contribution(s) was submitted. If You
   institute patent litigation against any entity (including a
   cross-claim or counterclaim in a lawsuit) alleging that the Work
   or a Contribution incorporated within the Work constitutes direct
   or contributory patent infringement, then any patent licenses
   granted to You under this License for that Work shall terminate
   as of the date such litigation is filed.

4. Redistribution. You may reproduce and distribute copies of the
   Work or Derivative Works thereof in any medium, with or without
   modifications, and in Source or Object form, provided that You
   meet the following conditions:

   (a) You must give any other recipients of the Work or
       Derivative Works a copy of this License; and

   (b) You must cause any modified files to carry prominent notices
       stating that You changed the files; and

   (c) You must retain, in the Source form of any Derivative Works
       that You distribute, all copyright, patent, trademark, and
       attribution notices from the Source form of the Work,
       excluding those notices that do not pertain to any part of
       the Derivative Works; and

   (d) If the Work includes a "NOTICE" text file as part of its
       distribution, then any Derivative Works that You distribute must
       include a readable copy of the attribution notices contained
       within such NOTICE file, excluding those notices that do not
       pertain to any part of the Derivative Works, in at least one
       of the following places: within a NOTICE text file distributed
       as part of the Derivative Works; within the Source form or
       documentation, if provided along with the Derivative Works; or,
       within a display generated by the Derivative Works, if and
       wherever such third-party notices normally appear. The contents
       of the NOTICE file are for informational purposes only and
       do not modify the License. You may add Your own attribution
       notices within Derivative Works that You distribute, alongside
       or as an addendum to the NOTICE text from the Work, provided
       that such additional attribution notices cannot be construed
       as modifying the License.

   You may add Your own copyright statement to Your modifications and
   may provide additional or different license terms and conditions
   for use, reproduction, or distribution of Your modifications, or
   for any such Derivative Works as a whole, provided Your use,
   reproduction, and distribution of the Work otherwise complies with
   the conditions stated in this License.

5. Submission of Contributions. Unless You explicitly state otherwise,
   any Contribution intentionally submitted for inclusion in the Work
   by You to the Licensor shall be under the terms and conditions of
   this License, without any additional terms or conditions.
   Notwithstanding the above, nothing herein shall supersede or modify
   the terms of any separate license agreement you may have executed
   with Licensor regarding such Contributions.

6. Trademarks. This License does not grant permission to use the trade
   names, trademarks, service marks, or product names of the Licensor,
   except as required for reasonable and customary use in describing the
   origin of the Work and reproducing the content of the NOTICE file.

7. Disclaimer of Warranty. Unless required by applicable law or
   agreed to in writing, Licensor provides the Work (and each
   Contributor provides its Contributions) on an "AS IS" BASIS,
   implied, including, without limitation, any warranties or conditions
   PARTICULAR PURPOSE. You are solely responsible for determining the
   appropriateness of using or redistributing the Work and assume any
   risks associated with Your exercise of permissions under this License.

8. Limitation of Liability. In no event and under no legal theory,
   whether in tort (including negligence), contract, or otherwise,
   unless required by applicable law (such as deliberate and grossly
   negligent acts) or agreed to in writing, shall any Contributor be
   liable to You for damages, including any direct, indirect, special,
   incidental, or consequential damages of any character arising as a
   result of this License or out of the use or inability to use the
   Work (including but not limited to damages for loss of goodwill,
   work stoppage, computer failure or malfunction, or any and all
   other commercial damages or losses), even if such Contributor
   has been advised of the possibility of such damages.

9. Accepting Warranty or Additional Liability. While redistributing
   the Work or Derivative Works thereof, You may choose to offer,
   and charge a fee for, acceptance of support, warranty, indemnity,
   or other liability obligations and/or rights consistent with this
   License. However, in accepting such obligations, You may act only
   on Your own behalf and on Your sole responsibility, not on behalf
   of any other Contributor, and only if You agree to indemnify,
   defend, and hold each Contributor harmless for any liability
   incurred by, or claims asserted against, such Contributor by reason
   of your accepting any such warranty or additional liability.


Verification is intended to assist the Chocolatey moderators and community
in verifying that this package's contents are trustworthy.

Package can be verified like this:

1. Go to


   to download the installer.

2. You can use one of the following methods to obtain the SHA256 checksum:
   - Use powershell function 'Get-FileHash'
   - Use Chocolatey utility 'checksum.exe'

   checksum32: 86C9BB1DBD1CC80BFBA99631E9BA1E711A4DD7D2BD01FC8A9BBD18829E304693

File 'license.txt' is obtained from:
md5: 6085A458A56936243DE33C0544D88F37 | sha1: 7F316E113E59E662FC6F67C1193178A1E3514A94 | sha256: 86C9BB1DBD1CC80BFBA99631E9BA1E711A4DD7D2BD01FC8A9BBD18829E304693 | sha512: B705DAC06FC64C753437086D488AADBF6A297153CA1601D5D51C4F6EB6284011F0672ED6AB5C3E550C24AF4B8370EA5886968D1FDA8A5309057B25150CD15E6C
$ErrorActionPreference = 'Stop'
$toolsPath = Split-Path $MyInvocation.MyCommand.Definition

$packageArgs = @{
  packageName            = 'etcher'
  fileType               = 'exe'
  file                   = gi $toolsPath\*_x32.exe
  silentArgs             = '/S'
  validExitCodes         = @(0)
  softwareName           = 'etcher*'
Install-ChocolateyInstallPackage @packageArgs

ls $toolsPath\*.exe | % { rm $_ -ea 0; if (Test-Path $_) { sc "$_.ignore" "" }}

Log in or click on link to see number of positives.

In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).

Chocolatey Pro provides runtime protection from possible malware.

Add to Builder Version Downloads Last Updated Status
Etcher 1.10.5 7 Friday, December 2, 2022 Approved
Etcher 1.10.4 189 Friday, December 2, 2022 Approved
Etcher 1.10.3 124 Thursday, December 1, 2022 Approved
Etcher 1.10.2 3100 Friday, November 25, 2022 Approved
Etcher 1.10.1 2371 Monday, November 21, 2022 Approved
Etcher 1.10.0 4077 Thursday, November 10, 2022 Approved
Etcher 1.9.0 1714 Tuesday, November 8, 2022 Approved
Etcher 1.8.17 139 Tuesday, November 8, 2022 Approved
Etcher 1.8.16 162 Tuesday, November 8, 2022 Approved
Etcher 1.8.15 7 Tuesday, November 8, 2022 Approved
Etcher 1.8.14 240 Tuesday, November 8, 2022 Approved
Etcher 1.8.13 10 Tuesday, November 8, 2022 Approved
Etcher 1.8.12 9 Tuesday, November 8, 2022 Approved
Etcher 1.8.11 106 Tuesday, November 8, 2022 Approved
Etcher 1.8.7 139 Tuesday, November 8, 2022 Approved
Etcher 1.8.6 68 Tuesday, November 8, 2022 Approved
Etcher 1.8.5 9 Tuesday, November 8, 2022 Approved
Etcher 1.8.4 58 Tuesday, November 8, 2022 Approved
Etcher 1.8.2 6 Tuesday, November 8, 2022 Approved
Etcher 1.8.0 5 Tuesday, November 8, 2022 Approved
Etcher 1.7.15 69 Monday, November 7, 2022 Approved
Etcher 1.7.14 57 Monday, November 7, 2022 Approved
Etcher 1.7.13 10 Monday, November 7, 2022 Approved
Etcher 1.7.12 7 Monday, November 7, 2022 Approved
Etcher 1.7.10 847 Monday, November 7, 2022 Approved
Etcher 1.7.9 14853 Friday, April 22, 2022 Approved
Etcher 1.7.8 6869 Friday, March 18, 2022 Approved
Etcher 1.7.7 5898 Tuesday, February 22, 2022 Approved
Etcher 1.7.6 813 Monday, February 21, 2022 Approved
Etcher 1.7.5 241 Monday, February 21, 2022 Approved
Etcher 1.7.4 117 Monday, February 21, 2022 Approved
Etcher 1.7.3 8638 Wednesday, December 29, 2021 Approved
Etcher 1.7.2 3274 Tuesday, December 21, 2021 Approved
Etcher 1.7.1 4838 Wednesday, December 8, 2021 Approved
Etcher 1.6.0 9977 Saturday, September 25, 2021 Approved
Etcher 1.5.122 5685 Friday, September 3, 2021 Approved
Etcher 1.5.121 7751 Thursday, July 15, 2021 Approved
Etcher 1.5.120 9579 Wednesday, May 12, 2021 Approved
Etcher 1.5.117 7626 Wednesday, April 7, 2021 Approved
Etcher 1.5.116 8728 Thursday, February 4, 2021 Approved
Etcher 1.5.115 4784 Tuesday, January 19, 2021 Approved
Etcher 1.5.114 2147 Friday, January 15, 2021 Approved
Etcher 1.5.112 7163 Friday, December 4, 2020 Approved
Etcher 1.5.111 3458 Tuesday, November 24, 2020 Approved
Etcher 1.5.110 4521 Friday, November 6, 2020 Approved
Etcher 5860 Saturday, October 3, 2020 Approved
Etcher 1.5.109 4100 Tuesday, September 15, 2020 Approved
Etcher 1.5.108 1865 Friday, September 11, 2020 Approved
Etcher 1.5.107 1847 Monday, September 7, 2020 Approved
Etcher 1.5.106 2875 Friday, August 28, 2020 Approved
Etcher 1.5.105 1208 Thursday, August 27, 2020 Approved
Etcher 1.5.104 2224 Saturday, August 22, 2020 Approved
Etcher 1.5.103 1292 Thursday, August 20, 2020 Approved
Etcher 1.5.102 4419 Wednesday, July 29, 2020 Approved
Etcher 1.5.101 4097 Friday, July 10, 2020 Approved
Etcher 1.5.100 3763 Tuesday, June 23, 2020 Approved
Etcher 1.5.99 2878 Saturday, June 13, 2020 Approved
Etcher 1.5.98 1132 Thursday, June 11, 2020 Approved
Etcher 1.5.97 1476 Tuesday, June 9, 2020 Approved
Etcher 1.5.95 2488 Monday, June 1, 2020 Approved
Etcher 1.5.94 1727 Thursday, May 28, 2020 Approved
Etcher 1.5.93 1372 Tuesday, May 26, 2020 Approved
Etcher 1.5.91 1706 Thursday, May 21, 2020 Approved
Etcher 1.5.90 597 Thursday, May 21, 2020 Approved
Etcher 1.5.89 2485 Friday, May 15, 2020 Approved
Etcher 1.5.88 1221 Wednesday, May 13, 2020 Approved
Etcher 1.5.86 2257 Thursday, May 7, 2020 Approved
Etcher 1.5.84 826 Wednesday, May 6, 2020 Approved
Etcher 1.5.83 1951 Friday, May 1, 2020 Approved
Etcher 1.5.82 1538 Tuesday, April 28, 2020 Approved
Etcher 1.5.81 2823 Friday, April 17, 2020 Approved
Etcher 1.5.80 3912 Wednesday, March 25, 2020 Approved
Etcher 1.5.79 4550 Friday, February 21, 2020 Approved
Etcher 1.5.78 700 Thursday, February 20, 2020 Approved
Etcher 1.5.77 1068 Tuesday, February 18, 2020 Approved
Etcher 1.5.76 2638 Friday, February 7, 2020 Approved
Etcher 1.5.75 654 Thursday, February 6, 2020 Approved
Etcher 1.5.74 160 Wednesday, February 5, 2020 Approved
Etcher 1.5.73 2083 Wednesday, January 29, 2020 Approved
Etcher 1.5.72 509 Tuesday, January 28, 2020 Approved
Etcher 1.5.71 2742 Wednesday, January 15, 2020 Approved
Etcher 1.5.70 4135 Saturday, December 14, 2019 Approved
Etcher 1.5.69 1259 Wednesday, December 11, 2019 Approved
Etcher 1.5.68 680 Tuesday, December 10, 2019 Approved
Etcher 1.5.67 1236 Saturday, December 7, 2019 Approved
Etcher 1.5.66 1255 Wednesday, December 4, 2019 Approved
Etcher 1.5.65 424 Tuesday, December 3, 2019 Approved
Etcher 1.5.64 1543 Thursday, November 28, 2019 Approved
Etcher 1.5.63 3206 Saturday, November 9, 2019 Approved
Etcher 1.5.62 1035 Thursday, November 7, 2019 Approved
Etcher 1.5.61 433 Wednesday, November 6, 2019 Approved
Etcher 1.5.60 3075 Saturday, October 19, 2019 Approved
Etcher 1.5.59 1402 Monday, October 14, 2019 Approved
Etcher 1.5.58 1468 Thursday, October 10, 2019 Approved
Etcher 1.5.57 3088 Tuesday, September 17, 2019 Approved
Etcher 1.5.56 3539 Wednesday, August 21, 2019 Approved
Etcher 1.5.54 703 Tuesday, August 20, 2019 Approved
Etcher 1.5.53 2178 Wednesday, August 7, 2019 Approved
Etcher 1.5.52 2232 Wednesday, July 24, 2019 Approved
Etcher 1.5.51 3114 Saturday, June 29, 2019 Approved
Etcher 1.5.50 2164 Saturday, June 15, 2019 Approved
Etcher 1.5.49 490 Friday, June 14, 2019 Approved
Etcher 1.5.47 719 Wednesday, June 12, 2019 Approved
Etcher 1.5.46 923 Monday, June 10, 2019 Approved
Etcher 1.5.45 1340 Wednesday, June 5, 2019 Approved
Etcher 1.5.44 549 Tuesday, June 4, 2019 Approved
Etcher 1.5.43 1460 Tuesday, May 28, 2019 Approved
Etcher 1.5.39 2141 Wednesday, May 15, 2019 Approved
Etcher 1.5.38 687 Tuesday, May 14, 2019 Approved
Etcher 1.5.35 969 Saturday, May 11, 2019 Approved
Etcher 1.5.33 1797 Wednesday, May 1, 2019 Approved
Etcher 1.5.30 1302 Thursday, April 25, 2019 Approved
Etcher 1.5.29 756 Tuesday, April 23, 2019 Approved
Etcher 1.5.28 853 Saturday, April 20, 2019 Approved
Etcher 1.5.26 1505 Saturday, April 13, 2019 Approved
Etcher 1.5.25 767 Thursday, April 11, 2019 Approved
Etcher 1.5.24 772 Tuesday, April 9, 2019 Approved
Etcher 1.5.23 1192 Thursday, April 4, 2019 Approved
Etcher 1.5.22 336 Wednesday, April 3, 2019 Approved
Etcher 1.5.20 532 Tuesday, April 2, 2019 Approved
Etcher 1.5.19 1120 Friday, March 29, 2019 Approved
Etcher 1.5.18 710 Wednesday, March 27, 2019 Approved
Etcher 1.5.15 503 Tuesday, March 26, 2019 Approved
Etcher 1.5.5 2693 Friday, March 1, 2019 Approved
Etcher 1.5.0 1267 Saturday, February 23, 2019 Approved
Etcher 1.4.9 3537 Monday, December 24, 2018 Approved
Etcher 1.4.8 2431 Saturday, November 24, 2018 Approved
Etcher 1.4.7 821 Tuesday, November 20, 2018 Approved
Etcher 1.4.6 1781 Tuesday, October 30, 2018 Approved
Etcher 1.4.5 1664 Friday, October 12, 2018 Approved
Etcher 1.4.4 3926 Friday, April 27, 2018 Approved
Etcher 1.4.3 712 Saturday, April 21, 2018 Approved
Etcher 1.4.1 802 Friday, April 13, 2018 Approved
Etcher 1.4.0 575 Tuesday, April 10, 2018 Approved
Etcher 1.3.1 1784 Wednesday, January 24, 2018 Approved
Etcher 1.2.1 1253 Friday, December 8, 2017 Approved
Etcher 1.2.0 779 Friday, November 24, 2017 Approved
Etcher 1.1.2 1242 Wednesday, August 9, 2017 Approved
Etcher 1.1.1 480 Wednesday, July 26, 2017 Approved
Etcher 1.1.0 452 Friday, July 21, 2017 Approved
Etcher 1.0.0 561 Sunday, June 4, 2017 Approved

This package has no dependencies.

Discussion for the Etcher Package

Ground Rules:

  • This discussion is only about Etcher and the Etcher package. If you have feedback for Chocolatey, please contact the Google Group.
  • This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
  • The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
  • Tell us what you love about the package or Etcher, or tell us what needs improvement.
  • Share your experiences with the package, or extra configuration or gotchas that you've found.
  • If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.
comments powered by Disqus