Welcome to the Chocolatey Community Package Repository! The packages found in this section of the site are provided, maintained, and moderated by the community.
Moderation
Every version of each package undergoes a rigorous moderation process before it goes live that typically includes:
- Security, consistency, and quality checking
- Installation testing
- Virus checking through VirusTotal
- Human moderators who give final review and sign off
More detail at Security and Moderation.
Organizational Use
If you are an organization using Chocolatey, we want your experience to be fully reliable. Due to the nature of this publicly offered repository, reliability cannot be guaranteed. Packages offered here are subject to distribution rights, which means they may need to reach out further to the internet to the official locations to download files at runtime.
Fortunately, distribution rights do not apply for internal use. With any edition of Chocolatey (including the free open source edition), you can host your own packages and cache or internalize existing community packages.
Disclaimer
Your use of the packages on this site means you understand they are not supported or guaranteed in any way. Learn more...
-
STEP1
Package Review
-
STEP2
Integration Method
-
STEP3
Internal Repo Url
-
STEP4
Environment Setup
-
STEP5
Install Script
Step 1: Review Your Packages
Step 2: Choose Your Integration Method
Step 3: Enter Your Internal Repository Url
(this should look similar to https://community.chocolatey.org/api/v2/)
Step 3: Copy Your Script or Download Config
Option 1: Copy Script
Option 2: Download Config
Step 4: Setup Your Environment
1. Ensure you are set for organizational deployment
Please see the organizational deployment guide
2. Get the package into your environment
Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)-
Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
-
You can also just download the packages and push them to a repository
Download Packages
-
Open Source
-
Download the packages:
Download Packages - Follow manual internalization instructions
-
-
Package Internalizer (C4B)
-
Run: (additional options)
-
For package and dependencies run:
- Automate package internalization
-
Run: (additional options)
Step 5: Copy Your Script
See options you can pass to upgrade.
See best practices for scripting.
Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.
If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:
## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.
### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
#### generally really quick to set up and there are quite a few options.
#### Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
#### are repository servers and will give you the ability to manage multiple
#### repositories and types from one server installation.
### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
#### Please see https://chocolatey.org/install#organization
### c. Other Requirements ###
#### We initialize a few things that are needed by this script - there are no other requirements.
$ErrorActionPreference = "Stop"
#### Set TLS 1.2 (3072) as that is the minimum required by various up-to-date repositories.
#### Use integers because the enumeration value for TLS 1.2 won't exist
#### in .NET 4.0, even though they are addressable if .NET 4.5+ is
#### installed (.NET 4.5 is an in-place upgrade).
[System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072
#### We use this variable for future REST calls.
$RequestArguments = @{
UseBasicParsing = $true
}
## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
#### Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$NugetRepositoryUrl = "INTERNAL REPO URL"
### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# $NugetRepositoryCredential = [PSCredential]::new(
# "username",
# ("password" | ConvertTo-SecureString -AsPlainText -Force)
# )
# $RequestArguments.Credential = $NugetRepositoryCredential
### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it
$ChocolateyDownloadUrl = "$($NugetRepositoryUrl.TrimEnd('/'))/package/chocolatey.1.1.0.nupkg"
### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"
#### ii. If using a Client Salt, add it here
# $ChocolateyCentralManagementClientSalt = "clientsalt"
#### iii. If using a Service Salt, add it here
# $ChocolateyCentralManagementServiceSalt = "servicesalt"
## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
#### Download the Nupkg, appending .zip to the filename to handle archive cmdlet limitations
if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
$TempDirectory = Join-Path $env:Temp "chocolateyInstall"
if (-not (Test-Path $TempDirectory -PathType Container)) {
$null = New-Item -Path $TempDirectory -ItemType Directory
}
$DownloadedNupkg = Join-Path $TempDirectory "$(Split-Path $ChocolateyDownloadUrl -Leaf).zip"
Invoke-WebRequest -Uri $ChocolateyDownloadUrl -OutFile $DownloadedNupkg @RequestArguments
#### Extract the Nupkg, and run the chocolateyInstall script
if (Get-Command Microsoft.PowerShell.Archive\Expand-Archive -ErrorAction SilentlyContinue) {
Microsoft.PowerShell.Archive\Expand-Archive -Path $DownloadedNupkg -DestinationPath $TempDirectory -Force
} else {
# PowerShell versions <4.0 do not have this function available
try {
$shellApplication = New-Object -ComObject Shell.Application
$zipPackage = $shellApplication.NameSpace($DownloadedNupkg)
$destinationFolder = $shellApplication.NameSpace($TempDirectory)
$destinationFolder.CopyHere($zipPackage.Items(), 0x10)
} catch {
Write-Warning "Unable to unzip package using built-in compression."
throw $_
}
}
& $(Join-Path $TempDirectory "tools\chocolateyInstall.ps1")
}
if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
refreshenv
}
## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# choco feature enable -n useFipsCompliantChecksums
### b. Apply Recommended Configuration ###
#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
choco config set --name cacheLocation --value C:\ProgramData\chocolatey\cache
#### Increase timeout to at least 4 hours
choco config set --name commandExecutionTimeoutSeconds --value 14400
#### Turn off download progress when running choco through integrations
choco feature disable --name showDownloadProgress
### c. Sources ###
#### Remove the default community package repository source
choco source list --limitoutput | ConvertFrom-Csv -Header 'Name', 'Location' -Delimiter '|' | ForEach-Object {
if ($_.Location -eq 'https://community.chocolatey.org/api/v2/') {
choco source remove -n $_.Name
}
}
#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here
#### NOTE: This EXAMPLE may require changes
if ($NugetRepositoryCredential) {
choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --user $NugetRepositoryCredential.UserName --password $NugetRepositoryCredential.GetNetworkCredential().Password --priority 1
} else {
choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --priority 1
}
### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
#### to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
#### when you browse to https://community.chocolatey.org/api/v2/
choco upgrade chocolatey --confirm
## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.
### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
choco install chocolatey-license --source $NugetRepositoryUrl --confirm
### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
choco source disable --name chocolatey.licensed
} else {
Write-Warning "Not disabling 'chocolatey.licensed' feed, as Chocolatey-License has not been installed."
}
### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.
#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
choco install chocolatey.extension --source $NugetRepositoryUrl --confirm
} else {
Write-Warning "Not installing 'chocolatey.extension', as Chocolatey-License has not been installed."
}
#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/
### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
choco feature disable --name showNonElevatedWarnings
choco feature enable --name useBackgroundService
choco feature enable --name useBackgroundServiceWithNonAdministratorsOnly
choco feature enable --name allowBackgroundServiceUninstallsFromUserInstallsOnly
choco config set --name allowedBackgroundServiceCommands --value "install,upgrade,uninstall"
### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if ($ChocolateyCentralManagementUrl) {
choco install chocolatey-agent --source $NugetRepositoryUrl --confirm
choco config set --name CentralManagementServiceUrl --value $ChocolateyCentralManagementUrl
if ($ChocolateyCentralManagementClientSalt) {
choco config set --name centralManagementClientCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementClientSalt
}
if ($ChocolateyCentralManagementServiceSalt) {
choco config set --name centralManagementServiceCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementServiceSalt
}
choco feature enable --name useChocolateyCentralManagement
choco feature enable --name useChocolateyCentralManagementDeployments
}
See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.
If Applicable - Chocolatey Configuration/Installation
## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.
### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
#### generally really quick to set up and there are quite a few options.
#### Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
#### are repository servers and will give you the ability to manage multiple
#### repositories and types from one server installation.
### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
#### Please see https://chocolatey.org/install#organization
### c. Other Requirements ###
#### i. chocolatey.chocolatey
##### You will require the chocolatey.chocolatey collection to be installed
##### on all machines using this playbook.
##### Please see https://github.com/chocolatey/chocolatey-ansible/#installing-the-collection-from-ansible-galaxy
- name: Install and Configure Chocolatey
hosts: all
## 2. TOP LEVEL VARIABLES ##
vars:
### a. Your internal repository url (the main one). ###
#### Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
nuget_repository_url: INTERNAL REPO URL
### b. Internal Repository Credential ###
#### If required, add the repository access credential here and
#### uncomment lines with source_username and source_password below
# nuget_repository_username: username
# nuget_repository_password: password
### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# chocolatey_central_management_url: https://chocolatey-central-management:24020/ChocolateyManagementService
#### ii. If using a Client Salt, add it here
# chocolatey_central_management_client_salt: clientsalt
#### iii. If using a Service Salt, add it here
# chocolatey_central_management_service_salt: servicesalt
## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
tasks:
- name: Install chocolatey
win_chocolatey:
name: chocolatey
source: {{ nuget_repository_url }}
# source_username: {{ nuget_repository_username }}
# source_password: {{ nuget_repository_password }}
## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# - name: Enable FIPS compliance
# win_chocolatey_feature:
# name: useFipsCompliantChecksums
# state: enabled
### b. Apply Recommended Configuration ###
#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
- name: Set the cache location
win_chocolatey_config:
name: cacheLocation
state: present
value: C:\ProgramData\chocolatey\cache
#### Increase timeout to at least 4 hours
- name: Set the command execution timeout
win_chocolatey_config:
name: commandExecutionTimeoutSeconds
state: present
value: 14400
#### Turn off download progress when running choco through integrations
- name: Disable showing download progress
win_chocolatey_feature:
name: showDownloadProgress
state: disabled
### c. Sources ###
#### Remove the default community package repository source
- name: Remove Chocolatey Community Repository
win_chocolatey_source:
name: chocolatey
state: absent
#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here
#### NOTE: This EXAMPLE may require changes
- name: Add Internal Repository
win_chocolatey_source:
name: ChocolateyInternal
state: present
source: {{ nuget_repository_url }}
# source_username: {{ nuget_repository_username }}
# source_password: {{ nuget_repository_password }}
priority: 1
### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
#### to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
#### when you browse to https://community.chocolatey.org/api/v2/
- name: Upgrade Chocolatey
win_chocolatey:
name: chocolatey
state: latest
## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.
### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
- name: Install Chocolatey License
win_chocolatey:
name: chocolatey-license
source: ChocolateyInternal
state: latest
### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
- name: Disable Chocolatey Community Repository
win_chocolatey_source:
name: chocolatey.licensed
state: disabled
### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.
#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
- name: Install Chocolatey Extension
win_chocolatey:
name: chocolatey.extension
source: ChocolateyInternal
state: latest
#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/
### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
- name: Hide not-elevated warnings
win_chocolatey_feature:
name: showNonElevatedWarnings
state: disabled
- name: Use background mode for self-service
win_chocolatey_feature:
name: useBackgroundService
state: enabled
- name: Use background service for non-admins
win_chocolatey_feature:
name: useBackgroundServiceWithNonAdministratorsOnly
state: enabled
- name: Allow background uninstallation for user installs
win_chocolatey_feature:
name: allowBackgroundServiceUninstallsFromUserInstallsOnly
state: enabled
- name: Set allowed background service commands
win_chocolatey_config:
name: backgroundServiceAllowedCommands
state: present
value: install,upgrade,uninstall
### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
- name: Install Chocolatey Agent
when: chocolatey_central_management_url is defined
win_chocolatey:
name: chocolatey-agent
source: ChocolateyInternal
state: latest
- name: Set the Central Management Service URL
when: chocolatey_central_management_url is defined
win_chocolatey_config:
name: CentralManagementServiceUrl
state: present
value: {{ chocolatey_central_management_url }}
- name: Set the Central Management Client Salt
when: chocolatey_central_management_client_salt is defined
win_chocolatey_config:
name: centralManagementClientCommunicationSaltAdditivePassword
state: present
value: {{ chocolatey_central_management_client_salt }}
- name: Set the Central Management Service Salt
when: chocolatey_central_management_service_salt is defined
win_chocolatey_config:
name: centralManagementServiceCommunicationSaltAdditivePassword
state: present
value: {{ chocolatey_central_management_service_salt }}
- name: Use Central Management
when: chocolatey_central_management_url is defined
win_chocolatey_feature:
name: useChocolateyCentralManagement
state: enabled
- name: Use Central Management Deployments
when: chocolatey_central_management_url is defined
win_chocolatey_feature:
name: useChocolateyCentralManagementDeployments
state: enabled
See docs at https://docs.chef.io/resource_chocolatey_package.html.
If Applicable - Chocolatey Configuration/Installation
## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.
### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
#### generally really quick to set up and there are quite a few options.
#### Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
#### are repository servers and will give you the ability to manage multiple
#### repositories and types from one server installation.
### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
#### Please see https://chocolatey.org/install#organization
### c. Other Requirements ###
#### The Chocolatey resources are available with any recent version of Chef.
#### We utilise the Chocolatey recipe to install the Chocolatey binaries.
include_recipe "chocolatey"
## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
#### Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
NugetRepositoryUrl = "INTERNAL REPO URL"
### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# NugetRepositoryUsername = "username"
# NugetRepositoryPassword = "password"
### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
ChocolateyNupkgUrl = "INTERNAL REPO URL/package/chocolatey.1.1.0.nupkg",
### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"
#### ii. If using a Client Salt, add it here
# ChocolateyCentralManagementClientSalt = "clientsalt"
#### iii. If using a Service Salt, add it here
# ChocolateyCentralManagementServiceSalt = "servicesalt"
## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
node['chocolatey']['install vars'] = {
'chocolateyDownloadUrl' => "#{ChocolateyNupkgUrl}",
}
## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# chocolatey_feature 'useFipsCompliantChecksums' do
# action :enable
# end
### b. Apply Recommended Configuration ###
#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolatey_config 'cacheLocation' do
value 'C:\ProgramData\chocolatey\cache'
end
#### Increase timeout to at least 4 hours
chocolatey_config 'commandExecutionTimeoutSeconds' do
value '14400'
end
#### Turn off download progress when running choco through integrations
chocolatey_feature 'showDownloadProgress' do
action :disable
end
### c. Sources ###
#### Remove the default community package repository source
chocolatey_source 'chocolatey' do
action :remove
end
#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here
#### NOTE: This EXAMPLE may require changes
chocolatey_source 'ChocolateyInternal' do
source "#{NugetRepositoryUrl}"
priority 1
action :add
end
execute 'ChocolateyInternal' do
command "choco source add --name ChocolateyInternal -s #{NugetRepositoryUrl} -u=#{NugetRepositoryUsername} -p=#{NugetRepositoryPassword} --priority=1"
only_if { NugetRepositoryUsername != nil || NugetRepositoryPassword != nil }
end
### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
#### to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
#### when you browse to https://community.chocolatey.org/api/v2/
chocolatey_package 'chocolatey' do
action :upgrade
source "#{NugetRepositoryUrl}"
end
## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.
### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
chocolatey_package 'chocolatey-license' do
action :install
source "#{NugetRepositoryUrl}"
end
### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
chocolatey_source 'chocolatey.licensed' do
action :disable
end
### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.
#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
chocolatey_package 'chocolatey.extention' do
action install
source "#{NugetRepositoryUrl}"
end
#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/
### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolatey_feature 'showNonElevatedWarnings' do
action :disable
end
chocolatey_feature 'useBackgroundService' do
action :enable
end
chocolatey_feature 'useBackgroundServiceWithNonAdministratorsOnly' do
action :enable
end
chocolatey_feature 'allowBackgroundServiceUninstallsFromUserInstallsOnly' do
action :enable
end
chocolatey_config 'backgroundServiceAllowedCommands' do
value 'install,upgrade,uninstall'
end
### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
chocolatey_package 'chocolatey-agent' do
action install
source "#{NugetRepositoryUrl}"
# user "#{NugetRepositoryUsername}"
# password "#{NugetRepositoryPassword}"
only_if { ChocolateyCentralManagementUrl != nil }
end
chocolatey_config 'CentralManagementServiceUrl' do
value "#{ChocolateyCentralManagementUrl}"
only_if { ChocolateyCentralManagementUrl != nil }
end
chocolatey_config 'centralManagementClientCommunicationSaltAdditivePassword' do
value "#{ChocolateyCentralManagementClientSalt}"
only_if { ChocolateyCentralManagementClientSalt != nil }
end
chocolatey_config 'centralManagementServiceCommunicationSaltAdditivePassword' do
value "#{ChocolateyCentralManagementServiceSalt}"
only_if { ChocolateyCentralManagementServiceSalt != nil }
end
chocolatey_feature 'useChocolateyCentralManagement' do
action :enable
only_if { ChocolateyCentralManagementUrl != nil }
end
chocolatey_feature 'useChocolateyCentralManagementDeployments' do
action :enable
only_if { ChocolateyCentralManagementUrl != nil }
end
Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.
If Applicable - Chocolatey Configuration/Installation
#requires -Modules cChoco
## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.
### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
#### generally really quick to set up and there are quite a few options.
#### Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
#### are repository servers and will give you the ability to manage multiple
#### repositories and types from one server installation.
### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
#### Please see https://chocolatey.org/install#organization
### c. Other Requirements ###
#### i. Requires chocolatey\cChoco DSC module to be installed on the machine compiling the DSC manifest
#### NOTE: This will need to be installed before running the DSC portion of this script
if (-not (Get-Module cChoco -ListAvailable)) {
$null = Install-PackageProvider -Name NuGet -MinimumVersion 2.8.5.201 -Force
if (($PSGallery = Get-PSRepository -Name PSGallery).InstallationPolicy -ne "Trusted") {
Set-PSRepository -Name PSGallery -InstallationPolicy Trusted
}
Install-Module -Name cChoco
if ($PSGallery.InstallationPolicy -ne "Trusted") {
Set-PSRepository -Name PSGallery -InstallationPolicy $PSGallery.InstallationPolicy
}
}
#### ii. Requires a hosted copy of the install.ps1 script
##### This should be available to download without authentication.
##### The original script can be found here: https://community.chocolatey.org/install.ps1
Configuration ChocolateyConfig {
## 2. TOP LEVEL VARIABLES ##
param(
### a. Your internal repository url (the main one). ###
#### Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$NugetRepositoryUrl = "INTERNAL REPO URL",
### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
$ChocolateyNupkgUrl = "INTERNAL REPO URL/package/chocolatey.1.1.0.nupkg",
### c. Internal Repository Credential ###
#### If required, add the repository access credential here
# $NugetRepositoryCredential = [PSCredential]::new(
# "username",
# ("password" | ConvertTo-SecureString -AsPlainText -Force)
# ),
### d. Install.ps1 URL
#### The path to the hosted install script:
$ChocolateyInstallPs1Url = "https://community.chocolatey.org/install.ps1"
### e. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService",
#### ii. If using a Client Salt, add it here
# $ChocolateyCentralManagementClientSalt = "clientsalt",
#### iii. If using a Service Salt, add it here
# $ChocolateyCentralManagementServiceSalt = "servicesalt"
)
Import-DscResource -ModuleName PSDesiredStateConfiguration
Import-DscResource -ModuleName cChoco
Node 'localhost' {
## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
Environment chocoDownloadUrl {
Name = "chocolateyDownloadUrl"
Value = $ChocolateyNupkgUrl
}
cChocoInstaller installChocolatey {
DependsOn = "[Environment]chocoDownloadUrl"
InstallDir = Join-Path $env:ProgramData "chocolatey"
ChocoInstallScriptUrl = $ChocolateyInstallPs1Url
}
## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# cChocoFeature featureFipsCompliance {
# FeatureName = "useFipsCompliantChecksums"
# }
### b. Apply Recommended Configuration ###
#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
cChocoConfig cacheLocation {
DependsOn = "[cChocoInstaller]installChocolatey"
ConfigName = "cacheLocation"
Value = "C:\ProgramData\chocolatey\cache"
}
#### Increase timeout to at least 4 hours
cChocoConfig commandExecutionTimeoutSeconds {
DependsOn = "[cChocoInstaller]installChocolatey"
ConfigName = "commandExecutionTimeoutSeconds"
Value = 14400
}
#### Turn off download progress when running choco through integrations
cChocoFeature showDownloadProgress {
DependsOn = "[cChocoInstaller]installChocolatey"
FeatureName = "showDownloadProgress"
Ensure = "Absent"
}
### c. Sources ###
#### Remove the default community package repository source
cChocoSource removeCommunityRepository {
DependsOn = "[cChocoInstaller]installChocolatey"
Name = "chocolatey"
Ensure = "Absent"
}
#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here.
#### NOTE: This EXAMPLE may require changes
cChocoSource addInternalSource {
DependsOn = "[cChocoInstaller]installChocolatey"
Name = "ChocolateyInternal"
Source = $NugetRepositoryUrl
Credentials = $NugetRepositoryCredential
Priority = 1
}
### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
#### to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
#### when you browse to https://community.chocolatey.org/api/v2/
cChocoPackageInstaller updateChocolatey {
DependsOn = "[cChocoSource]addInternalSource", "[cChocoSource]removeCommunityRepository"
Name = "chocolatey"
AutoUpgrade = $true
}
## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.
### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
cChocoPackageInstaller chocolateyLicense {
DependsOn = "[cChocoPackageInstaller]updateChocolatey"
Name = "chocolatey-license"
}
### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
Script disableLicensedSource {
DependsOn = "[cChocoPackageInstaller]chocolateyLicense"
GetScript = {
$Source = choco source list --limitoutput | `
ConvertFrom-Csv -Delimiter '|' -Header Name, Source, Disabled | `
Where-Object Name -eq "chocolatey.licensed"
return @{
Result = if ($Source) {
[bool]::Parse($Source.Disabled)
} else {
Write-Warning "Source 'chocolatey.licensed' was not present."
$true # Source does not need disabling
}
}
}
SetScript = {
$null = choco source disable --name "chocolatey.licensed"
}
TestScript = {
$State = [ScriptBlock]::Create($GetScript).Invoke()
return $State.Result
}
}
### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.
#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
cChocoPackageInstaller chocolateyLicensedExtension {
DependsOn = "[Script]disableLicensedSource"
Name = "chocolatey.extension"
}
#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/
### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
cChocoFeature hideElevatedWarnings {
DependsOn = "[cChocoPackageInstaller]chocolateyLicensedExtension"
FeatureName = "showNonElevatedWarnings"
Ensure = "Absent"
}
cChocoFeature useBackgroundService {
DependsOn = "[cChocoPackageInstaller]chocolateyLicensedExtension"
FeatureName = "useBackgroundService"
Ensure = "Present"
}
cChocoFeature useBackgroundServiceWithNonAdmins {
DependsOn = "[cChocoPackageInstaller]chocolateyLicensedExtension"
FeatureName = "useBackgroundServiceWithNonAdministratorsOnly"
Ensure = "Present"
}
cChocoFeature useBackgroundServiceUninstallsForUserInstalls {
DependsOn = "[cChocoPackageInstaller]chocolateyLicensedExtension"
FeatureName = "allowBackgroundServiceUninstallsFromUserInstallsOnly"
Ensure = "Present"
}
cChocoConfig allowedBackgroundServiceCommands {
DependsOn = "[cChocoFeature]useBackgroundService"
ConfigName = "backgroundServiceAllowedCommands"
Value = "install,upgrade,uninstall"
}
### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if ($ChocolateyCentralManagementUrl) {
cChocoPackageInstaller chocolateyAgent {
DependsOn = "[cChocoPackageInstaller]chocolateyLicensedExtension"
Name = "chocolatey-agent"
}
cChocoConfig centralManagementServiceUrl {
DependsOn = "[cChocoPackageInstaller]chocolateyAgent"
ConfigName = "CentralManagementServiceUrl"
Value = $ChocolateyCentralManagementUrl
}
if ($ChocolateyCentralManagementClientSalt) {
cChocoConfig centralManagementClientSalt {
DependsOn = "[cChocoPackageInstaller]chocolateyAgent"
ConfigName = "centralManagementClientCommunicationSaltAdditivePassword"
Value = $ChocolateyCentralManagementClientSalt
}
}
if ($ChocolateyCentralManagementServiceSalt) {
cChocoConfig centralManagementServiceSalt {
DependsOn = "[cChocoPackageInstaller]chocolateyAgent"
ConfigName = "centralManagementServiceCommunicationSaltAdditivePassword"
Value = $ChocolateyCentralManagementServiceSalt
}
}
cChocoFeature useCentralManagement {
DependsOn = "[cChocoPackageInstaller]chocolateyAgent"
FeatureName = "useChocolateyCentralManagement"
Ensure = "Present"
}
cChocoFeature useCentralManagementDeployments {
DependsOn = "[cChocoPackageInstaller]chocolateyAgent"
FeatureName = "useChocolateyCentralManagementDeployments"
Ensure = "Present"
}
}
}
}
# If working this into an existing configuration with a good method for
$ConfigData = @{
AllNodes = @(
@{
NodeName = "localhost"
PSDscAllowPlainTextPassword = $true
}
)
}
try {
Push-Location $env:Temp
$Config = ChocolateyConfig -ConfigurationData $ConfigData
Start-DscConfiguration -Path $Config.PSParentPath -Wait -Verbose -Force
} finally {
Pop-Location
}
Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.
If Applicable - Chocolatey Configuration/Installation
## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.
### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
#### generally really quick to set up and there are quite a few options.
#### Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
#### are repository servers and will give you the ability to manage multiple
#### repositories and types from one server installation.
### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
#### Please see https://chocolatey.org/install#organization
### c. Other Requirements ###
#### i. Requires puppetlabs/chocolatey module
#### See https://forge.puppet.com/puppetlabs/chocolatey
## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
#### Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$_repository_url = 'INTERNAL REPO URL'
### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
$_choco_download_url = 'INTERNAL REPO URL/package/chocolatey.1.1.0.nupkg'
### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $_chocolatey_central_management_url = 'https://chocolatey-central-management:24020/ChocolateyManagementService'
#### ii. If using a Client Salt, add it here
# $_chocolatey_central_management_client_salt = "clientsalt"
#### iii. If using a Service Salt, add it here
# $_chocolatey_central_management_service_salt = 'servicesalt'
## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
### Note: `chocolatey_download_url is completely different than normal
### source locations. This is directly to the bare download url for the
### chocolatey.nupkg, similar to what you see when you browse to
### https://community.chocolatey.org/api/v2/package/chocolatey
class {'chocolatey':
chocolatey_download_url => $_choco_download_url,
use_7zip => false,
}
## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#chocolateyfeature {'useFipsCompliantChecksums':
# ensure => enabled,
#}
### b. Apply Recommended Configuration ###
#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolateyconfig {'cacheLocation':
value => 'C:\ProgramData\chocolatey\cache',
}
#### Increase timeout to at least 4 hours
chocolateyconfig {'commandExecutionTimeoutSeconds':
value => '14400',
}
#### Turn off download progress when running choco through integrations
chocolateyfeature {'showDownloadProgress':
ensure => disabled,
}
### c. Sources ###
#### Remove the default community package repository source
chocolateysource {'chocolatey':
ensure => absent,
location => 'https://community.chocolatey.org/api/v2/',
}
#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here
#### NOTE: This EXAMPLE requires changes
chocolateysource {'internal_chocolatey':
ensure => present,
location => $_repository_url,
priority => 1,
username => 'optional',
password => 'optional,not ensured',
bypass_proxy => true,
admin_only => false,
allow_self_service => false,
}
### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
#### to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
#### when you browse to https://community.chocolatey.org/api/v2/
package {'chocolatey':
ensure => latest,
provider => chocolatey,
source => $_repository_url,
}
## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.
### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/guides/organizations/organizational-deployment-guide#exercise-4-create-a-package-for-the-license
# TODO: Add resource for installing/ensuring the chocolatey-license package
package {'chocolatey-license':
ensure => latest,
provider => chocolatey,
source => $_repository_url,
}
### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
## Disabled sources still need all other attributes until
## https://tickets.puppetlabs.com/browse/MODULES-4449 is resolved.
## Password is necessary with user, but not ensurable, so it should not
## matter what it is set to here. If you ever do get into trouble here,
## the password is your license GUID.
chocolateysource {'chocolatey.licensed':
ensure => disabled,
priority => '10',
user => 'customer',
password => '1234',
require => Package['chocolatey-license'],
}
### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.
#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
package {'chocolatey.extension':
ensure => latest,
provider => chocolatey,
source => $_repository_url,
require => Package['chocolatey-license'],
}
#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/
### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolateyfeature {'showNonElevatedWarnings':
ensure => disabled,
}
chocolateyfeature {'useBackgroundService':
ensure => enabled,
}
chocolateyfeature {'useBackgroundServiceWithNonAdministratorsOnly':
ensure => enabled,
}
chocolateyfeature {'allowBackgroundServiceUninstallsFromUserInstallsOnly':
ensure => enabled,
}
chocolateyconfig {'backgroundServiceAllowedCommands':
value => 'install,upgrade,uninstall',
}
### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if $_chocolatey_central_management_url {
package {'chocolatey-agent':
ensure => latest,
provider => chocolatey,
source => $_repository_url,
require => Package['chocolatey-license'],
}
chocolateyconfig {'CentralManagementServiceUrl':
value => $_chocolatey_central_management_url,
}
if $_chocolatey_central_management_client_salt {
chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
value => $_chocolatey_central_management_client_salt,
}
}
if $_chocolatey_central_management_service_salt {
chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
value => $_chocolatey_central_management_client_salt,
}
}
chocolateyfeature {'useChocolateyCentralManagement':
ensure => enabled,
require => Package['chocolatey-agent'],
}
chocolateyfeature {'useChocolateyCentralManagementDeployments':
ensure => enabled,
require => Package['chocolatey-agent'],
}
}
Need Help? View our docs or file an issue.
There is already a version of this package in your Script Builder
Current Version | New Version |
---|---|
- Passing
- Failing
- Pending
- Unknown / Exempted

Downloads:
1,591
Downloads of v 1.03.20190425:
588
Last Update:
25 Apr 2019
Package Maintainer(s):
Software Author(s):
- Danny Ben Shitrit
Tags:
flicflac audio converter wav flac mp3 ogg ape- Software Specific:
- Software Site
- Software Source
- Software License
- Software Issues
- Package Specific:
- Package Source
- Package outdated?
- Package broken?
- Contact Maintainers
- Contact Site Admins
- Software Vendor?
- Report Abuse
- Download

FlicFlac
- 1
- 2
- 3
1.03.20190425 | Updated: 25 Apr 2019
- Software Specific:
- Software Site
- Software Source
- Software License
- Software Issues
- Package Specific:
- Package Source
- Package outdated?
- Package broken?
- Contact Maintainers
- Contact Site Admins
- Software Vendor?
- Report Abuse
- Download
Downloads:
1,591
Downloads of v 1.03.20190425:
588
Maintainer(s):
Software Author(s):
- Danny Ben Shitrit
Edit Package
To edit the metadata for a package, please upload an updated version of the package.
Chocolatey's Community Package Repository currently does not allow updating package metadata on the website. This helps ensure that the package itself (and the source used to build the package) remains the one true source of package metadata.
This does require that you increment the package version.
- 1
- 2
- 3
FlicFlac
1.03.20190425
- 1
- 2
- 3
Some Checks Have Failed or Are Not Yet Complete
Not All Tests Have Passed
Validation Testing Passed
Verification Testing Passed
DetailsScan Testing Resulted in Flagged:
This package was submitted (and approved) prior to automated virus scanning integration into the package moderation processs.
We recommend clicking the "Details" link to make your own decision on installing this package.
Deployment Method: Individual Install, Upgrade, & Uninstall
To install FlicFlac, run the following command from the command line or from PowerShell:
To upgrade FlicFlac, run the following command from the command line or from PowerShell:
To uninstall FlicFlac, run the following command from the command line or from PowerShell:
Deployment Method:
📝 NOTE: This applies to both open source and commercial editions of Chocolatey.
1. Enter Your Internal Repository Url
(this should look similar to https://community.chocolatey.org/api/v2/)
2. Setup Your Environment
1. Ensure you are set for organizational deployment
Please see the organizational deployment guide
2. Get the package into your environment
Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)-
Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the package and push it to a repository Download
-
Open Source
-
Download the package:
Download - Follow manual internalization instructions
-
-
Package Internalizer (C4B)
-
Run: (additional options)
choco download flicflac --internalize --source=https://community.chocolatey.org/api/v2/
-
For package and dependencies run:
choco push --source="'INTERNAL REPO URL'"
- Automate package internalization
-
Run: (additional options)
3. Copy Your Script
choco upgrade flicflac -y --source="'INTERNAL REPO URL'" [other options]
See options you can pass to upgrade.
See best practices for scripting.
Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.
If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:
choco upgrade flicflac -y --source="'INTERNAL REPO URL'"
$exitCode = $LASTEXITCODE
Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
Exit 0
}
Exit $exitCode
- name: Install flicflac
win_chocolatey:
name: flicflac
version: '1.03.20190425'
source: INTERNAL REPO URL
state: present
See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.
chocolatey_package 'flicflac' do
action :install
source 'INTERNAL REPO URL'
version '1.03.20190425'
end
See docs at https://docs.chef.io/resource_chocolatey_package.html.
cChocoPackageInstaller flicflac
{
Name = "flicflac"
Version = "1.03.20190425"
Source = "INTERNAL REPO URL"
}
Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.
package { 'flicflac':
ensure => '1.03.20190425',
provider => 'chocolatey',
source => 'INTERNAL REPO URL',
}
Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.
4. If applicable - Chocolatey configuration/installation
See infrastructure management matrix for Chocolatey configuration elements and examples.
This package was approved by moderator gep13 on 08 May 2019.
choco://flicflac
To use choco:// protocol URLs, install (unofficial) choco:// Protocol support
FlicFlac is a portable (no installation required) utility for converting WAV, FLAC, MP3, OGG and APE files to any of the other formats.
You may drag files onto the FlicFlac interface, or convert files directly from the right click menu in Windows Explorer.
Supported Conversions
WAV to FLAC · WAV to MP3 · WAV to OGG · WAV to APE
FLAC to WAV · FLAC to MP3 · FLAC to OGG · FLAC to APE
MP3 to FLAC · MP3 to WAV · MP3 to MP3 (bitrate change) · MP3 to OGG · MP3 to APE
OGG to FLAC · OGG to WAV · OGG to MP3 · OGG to APE
APE to FLAC · APE to WAV · APE to MP3 · APE to OGG
Click here to Patreon-ize the package maintainer.
$ErrorActionPreference = 'Stop'
$packageName = 'flicflac'
Install-ChocolateyShortcut -shortcutFilePath "$ENV:Public\Desktop\FlicFlac.lnk" -targetPath "$ENV:ChocolateyInstall\lib\flicflac\tools\FlicFlac.exe"
$ErrorActionPreference = 'Stop'
$packageName = 'flicflac'
Remove-Item "$ENV:Public\Desktop\FlicFlac.lnk" -Force -ErrorAction SilentlyContinue
md5: B41D1E889A72322CB7DF1B158DF4A83D | sha1: B952895C5D802136912CE1A4B76DC8A6F7A31ED3 | sha256: C7637E20323CF9A3C2EE12DB2C67DF7E3CBF753AB1CF47E5FB99303EAA3FA163 | sha512: 8F8775576A1A2A1FEEB928D361B1BB8DFCBD264FD7F5C06F6E10AC411DF0F962D3BA83AA7FE687D739D81C98855345E1AE7B854D292972ECF16082DE3F757B9A
============================== FlicFlac ==============================
The MIT License (MIT)
Copyright (c) 2008-2016 Danny Ben Shitrit
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
============================== FlicFlac ==============================
FlicFlac 1.03
==================================================
Tiny Portable Audio Converter (WAV FLAC MP3 OGG APE)
Download binary: <http://sector-seven.net/software/flicflac>
--------------------------------------------------

Introduction
--------------------------------------------------
This is a simple utility for converting WAV, FLAC, MP3, APE and OGG files to
any of the other formats.
It uses these external command line encoders/decoders:
- [flac.exe (FLAC converter)](http://sourceforge.net/project/showfiles.php?group_id=13478&package_id=12675) - flac-win.zip
- [lame.exe (MP3 converter)](http://www.rarewares.org/mp3-lame-bundle.php#lame-current) - Lame Release Bundle
- [oggenc.exe and oggdec.exe (OGG converter)](http://www.vorbis.com/files/1.0.1/windows/vorbis-tools-1.0.1-win32.zip)
- [MAC.exe (APE converter)](http://www.monkeysaudio.com/)
If you redistribute this package please refer to the license of these
encoders.
On the first run, FlicFlac will spit out a small INI file for you to do some
minor configurations if needed, and will also spit out the four needed
converters into the windows temp directory (flac.exe, lame.exe, oggenc.exe
and oggdec.exe).
Usage
--------------------------------------------------
### Method 1:
- Select a conversion format by pressing one of the format buttons.
- Press the Select button to select files to convert.
### Method 2:
- Select a conversion format by pressing one of the format buttons.
- Drag files or folders onto the Select button.
### Method 3:
- Drag files or folders onto one of the format buttons.
### Method 4:
- Right click a file and select Convert with FlicFlac.
- This works only on single files.
- Enable/disable the context menu integration through the settings menu.
- By default, FlicFlac will exit after conversion when using this method.
This may be changed in the INI file.
- You may activate the settings menu through the keyboard by pressing F8 or the
right click key (apps), or by right clicking anywhere on the GUI.
Technical Notes
--------------------------------------------------
- FLAC files are encoded with the default flac settings (medium compression,
medium speed)
- MP3 files are encoded with a default of 192kbps. Encoding mode (CBR/VBR) and
bitrate are configurable through the INI file.
Presets are provided in an easy access menu.
Presets menu can be configured in the INI file.
- OGG files are encoded with a quality setting of 5 (on a scale of 0-10)
- APE files are encoded with a compression level of 2000 (on a scale of
1000-2000)
- OGG and MP3 files are encoded with ID3 tag information:
Song Title = Filename
Year = Current year
Artist = Taken from the INI file
- Native Conversions (one step):
1. WAV2MP3 WAV to MP3 (lame)
2. MP32WAV MP3 to WAV (lame)
3, FLAC2WAV FLAC to WAV (flac)
4. WAV2FLAC WAV to FLAC (flac)
5. WAV2OGG WAV to OGG (oggenc)
6. FLAC2OGG WAV to FLAC (oggenc)
7. OGG2WAV OGG to WAV (oggdec)
8. WAV2APE WAV to APE (mac)
9. APE2WAV APE to WAV (mac)
- Hybrid Conversions (two steps):
10. FLAC2MP3 FLAC to WAV (flac) then WAV to MP3 (lame)
11. FLAC2APE FLAC to APE (flac) then WAV to APE (mac)
12. MP32FLAC MP3 to WAV (lame) then WAV to FLAC (flac)
13. MP32OGG MP3 to WAV (lame) then WAV to OGG (oggenc)
14. MP32APE MP3 to WAV (lame) then WAV to APE (mac)
15. OGG2FLAC OGG to WAV (oggdec) then WAV to FLAC (flac)
16. OGG2MP3 OGG to WAV (oggdec) then WAV to MP3 (lame)
17. OGG2APE OGG to APE (oggdec) then WAV to APE (mac)
18. APE2MP3 APE to WAV (mac) then WAV to MP3 (lame)
19. APE2OGG APE to WAV (mac) then WAV to OGG (oggenc)
20. APE2FLAC APE to WAV (mac) then WAV to FLAC (flac)
- MP3 Bitrate Conversion
21. Also supported, MP3 to MP3 - to convert to a different bitrate.
License
--------------------------------------------------
This code is released under the MIT license.
Note that FlicFlac uses external codecs for encoding audio file, please
refer to their respective license.
Contributors
--------------------------------------------------
- [Jastria Rahmat (ijash)](http://www.soundcloud.com/ijash) - icons
Change Log
--------------------------------------------------
2016 02 27 - 1.03
Changed: Icon, courtesy of Jastria Rahmat (ijash)
Changed: License to MIT
Updated: Some minor code tweaks to support newer AutoHotkey version
Updated: UI to allow use of Windows theme and act as a tool window
2013 08 16 - 1.02
Changed: MP3 to MP3 conversion will no longer offer to delete the input file
2011 03 09 - 1.01
Added : Support for MP3 to MP3 conversion (bitrate change).
Changed: About dialog.
2011 01 07 - 1.00
Added : Support for Monkey's Audio APE format
2010 12 14 - 0.36
Fixed : Shell integration did not work in some cases.
Updated: Shell integration now sensitive to UAC.
Changed: Minor GUI changes to better fit Windows 7
Changed: Default ID3 artist in INI file is now empty
Updated: Lame MP3 version to 3.98.4
2009 10 06 - 0.32
Updated: Lame version to 3.98.2.
2009 06 22 - 0.31
Changed: Recompiled with AutoHotkey 1.0.48.02 due to AVG reporting false
positive with older AHK version.
2009 06 09 - 0.30
Added : Configuration in INI to enable/disable flat buttons. (thanks Dr.
Drips).
2008 12 11 - 0.29
Fixed : Context menu integration was installed on startup even without user
request. Also caused the "Disable Shell Integration" option to be
temporary, until the next time you use FlicFlac.
Removed: "Open folder when done" checkbox. Now resides in the INI file only.
Added : "Always on top" checkbox.
Added : Option in INI to choose if you want the window to start inactive or
not, when Always on Top is enabled.
2008 12 09 - 0.28
Added : Context menu integration. May be enabled or disabled from the
settings menu. Currently supports only single files. No support for
multi-files selection or folders.
When a conversion is done through the context menu, FlicFlac will
exit when its done (may be changed in the INI file).
2008 12 03 - 0.27
Fixed : Ogg encoders were not cleaned on exit.
Fixed : Ogg encoders were not tested for existence.
Added : DebugMode - if enabled, will log actions to file and (optionally)
avoid execution of conversions and deletions.
Changed: Executables will no longer be oeverwritten in the temp folder.
Improves loading time (was broken in 0.26).
Added : Temp folder location is now configurable.
Added : CleanupOnExit is now configurable (allows to delete the encoders
on exit).
Added : All encoder options are now configurable.
2008 12 03 - 0.26
Added : Support for OGG files using OggTools 1.0.1
Changed: Buttons to flat
2008 08 31 - 0.25
Changed: Minor maintenance release - removed tray icon.
2008 06 03 - 0.24
Fixed : GUI did not look right in some XP theme settings (thanks patto).
2008 06 01 - 0.23
Added : Custom dialog boxes for delete confirmation and overwrite
confirmation. We will now have "Yes to All" and "No to All"
dialogs.
Added : The files that were not converted due to a "No" answer to an
overwrite confirmation request, will be displayed in a message box
at the end of the conversion cycle.
Changed: Default value for ConfirmBeforeDelete key in INI now includes all
three formats, for consistency (since we now have the yes/no to all
dialog).
2008 05 31 - 0.22
Added : We will now remember the last selected format (thanks Tom de Rooy).
2008 05 30 - 0.21
Added : Configuration in INI file to confirm before deleting or overwriting
certain file types. By default, we will ask before we delete or
overwrite FLAC and WAV.
Added : A menu for some common operations.
Added : Menu item: Open INI. Will start the INI with your default INI
editor and wait for you to close it. Then, if it was changed, we
will reload ourselves.
Added : Sub menu: MP3 encoding presets. The menu elements are completely
customizable in the INI file and the last used preset is stored
in the INI. Selecting "Custom" will use the settings you have
configured in the INI keys (MP3->Mode, CBRKbps, VBRLevel, VBRRate).
Changed: When using one of the double conversions (e.g. FLAC2MP3) we will
now use a temporary filename for the temporary output instead of
using the same filename (to avoid accidental overwrite).
2008 05 29 - 0.20
Added : Support for FLAC2MP3 conversion (thanks teknocide & Weird Energy).
This will first do FLAC2WAV then WAV2MP3 since we are using two
separate encoders.
Added : Support for MP32WAV and MP32FLAC
Added : Error message dialog, in case the encoder returns an error code.
This is done for two reasons: a) to capture bad behavior done by
the external encoders (e.g. attempting to convert ding.wav at
192kbps fails by LAME, but for some reason it still generates an
empty MP3 file) and b) to make sure that if we are asked to delete
the input file, we got a good exit code from the encoder.
Added : Some configuration in the INI file to control how we handle errors.
Added : Verification code to make sure we have an up to date INI file. In
case an INI file from an older version is found, an option to
automatically update it is provided.
Changed: The way we delete source files. Instead of letting the encoder
delete the source with a command line switch, we will delete it
ourselves if the encoder returned a success exit code.
This was changed in order to be more generic (for encoders that do
not support deletion of input file).
Changed: Significant changes to internal conversion functions and to the GUI
Changed: !!! IMPORTANT !!! Delete Input File checkbox is now working the
same in all file formats (i.e. we will also delete FLAC and WAV
files when it is checked).
2008 05 28 - 0.14
Added : Support for VBR encoding for MP3 (thanks Tom de Rooy).
2008 05 28 - 0.13
Fixed : Dragging over non-button control was still attempting to convert.
No damage was done, since we did not know which conversion to do,
but the regex code was inaccurate.
Added : Check for correct windows coordinates on startup (was done only on
shutdown by mistake).
Added : The state of the two checkboxes is now also remembered in the INI.
Added : Drag and drop support for folders.
Changed: Some internal code changes.
Changed: Hot character for the buttons to be consistent (now all are set to
the target format).
2008 05 28 - 0.12
Added : Support for WAV2MP3 conversion, using LAME.
Added : Support for dragging files on the buttons (thanks patto).
Added : INI file - to remember last folder, last window coordinates and to
set MP3 quality and artist ID3 tag.
Changed: Status text to marquee progress.
Changed: We will no longer erase the converters executables from the windows
temporary folder, in order to allow a faster load time.
2008 05 27 - 0.11
Fixed : Names with spaces were not supported...
2008 05 27 - 0.10
Initial Release
============================== FlicFlac ==============================
bcurran3 downloaded and unzipped the files included from the developer's website at:
https://sector-seven.com/software/flicflac
============================== FlicFlac ==============================s
Log in or click on link to see number of positives.
- FlicFlac.exe (c7637e20323c) - ## / 68
- flicflac.1.03.20190425.nupkg (c422bd40a8e7) - ## / 63
In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).
Chocolatey Pro provides runtime protection from possible malware.
Add to Builder | Version | Downloads | Last Updated | Status |
---|---|---|---|---|
FlicFlac 1.03.20190425 | 588 | Thursday, April 25, 2019 | Approved | |
FlicFlac 1.03.20161106 | 582 | Sunday, November 6, 2016 | Approved | |
FlicFlac 1.03 | 421 | Sunday, April 10, 2016 | Approved |
Copyright (c) 2008-2016 Danny Ben Shitrit
checksums added
This package has no dependencies.
Ground Rules:
- This discussion is only about FlicFlac and the FlicFlac package. If you have feedback for Chocolatey, please contact the Google Group.
- This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
- The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
- Tell us what you love about the package or FlicFlac, or tell us what needs improvement.
- Share your experiences with the package, or extra configuration or gotchas that you've found.
- If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.