Step 1: Review Your Packages

Step 2: Choose Your Integration Method

Step 3: Copy Your Script or Download Config

Option 1: Copy Script

Option 2: Download Config

Step 4: Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the packages and push them to a repository
  Download Packages

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the packages:
  Download Packages
- Follow manual internalization instructions
Package Internalizer (C4B)
- Run: (additional options)
- For package and dependencies run:
- Automate package internalization

Step 5: Copy Your Script

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###

#### We initialize a few things that are needed by this script - there are no other requirements.
$ErrorActionPreference = "Stop"

#### Set TLS 1.2 (3072) as that is the minimum required by various up-to-date repositories.
#### Use integers because the enumeration value for TLS 1.2 won't exist
#### in .NET 4.0, even though they are addressable if .NET 4.5+ is
#### installed (.NET 4.5 is an in-place upgrade).
[System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072

#### We use this variable for future REST calls.
$RequestArguments = @{
    UseBasicParsing = $true
}

## 2. TOP LEVEL VARIABLES ##

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# $NugetRepositoryCredential = [PSCredential]::new(
#     "username",
#     ("password" | ConvertTo-SecureString -AsPlainText -Force)
# )
# $RequestArguments.Credential = $NugetRepositoryCredential

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it
$ChocolateyDownloadUrl = "$($NugetRepositoryUrl.TrimEnd('/'))/package/chocolatey.2.3.0.nupkg"

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# $ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

#### Download the Nupkg, appending .zip to the filename to handle archive cmdlet limitations
if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    $TempDirectory = Join-Path $env:Temp "chocolateyInstall"
    if (-not (Test-Path $TempDirectory -PathType Container)) {
        $null = New-Item -Path $TempDirectory -ItemType Directory
    }
    $DownloadedNupkg = Join-Path $TempDirectory "$(Split-Path $ChocolateyDownloadUrl -Leaf).zip"
    Invoke-WebRequest -Uri $ChocolateyDownloadUrl -OutFile $DownloadedNupkg @RequestArguments

    #### Extract the Nupkg, and run the chocolateyInstall script
    if (Get-Command Microsoft.PowerShell.Archive\Expand-Archive -ErrorAction SilentlyContinue) {
        Microsoft.PowerShell.Archive\Expand-Archive -Path $DownloadedNupkg -DestinationPath $TempDirectory -Force
    } else {
        # PowerShell versions <4.0 do not have this function available
        try {
            $shellApplication = New-Object -ComObject Shell.Application
            $zipPackage = $shellApplication.NameSpace($DownloadedNupkg)
            $destinationFolder = $shellApplication.NameSpace($TempDirectory)
            $destinationFolder.CopyHere($zipPackage.Items(), 0x10)
        } catch {
            Write-Warning "Unable to unzip package using built-in compression."
            throw $_
        }
    }

    & $(Join-Path $TempDirectory "tools\chocolateyInstall.ps1")
}

if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    refreshenv
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# choco feature enable -n useFipsCompliantChecksums

### b. Apply Recommended Configuration ###
#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
choco config set --name cacheLocation --value C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
choco config set --name commandExecutionTimeoutSeconds --value 14400

#### Turn off download progress when running choco through integrations
choco feature disable --name showDownloadProgress

### c. Sources ###
#### Remove the default community package repository source
choco source list --limitoutput | ConvertFrom-Csv -Header 'Name', 'Location' -Delimiter '|' | ForEach-Object {
    if ($_.Location -eq 'https://community.chocolatey.org/api/v2/') {
        choco source remove -n $_.Name
    }
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
if ($NugetRepositoryCredential) {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --user $NugetRepositoryCredential.UserName --password $NugetRepositoryCredential.GetNetworkCredential().Password --priority 1
} else {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --priority 1
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
choco upgrade chocolatey --confirm

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
choco install chocolatey-license --source $NugetRepositoryUrl --confirm

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco source disable --name chocolatey.licensed
} else {
    Write-Warning "Not disabling 'chocolatey.licensed' feed, as Chocolatey-License has not been installed."
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco install chocolatey.extension --source $NugetRepositoryUrl --confirm
} else {
    Write-Warning "Not installing 'chocolatey.extension', as Chocolatey-License has not been installed."
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
choco feature disable --name showNonElevatedWarnings
choco feature enable --name useBackgroundService
choco feature enable --name useBackgroundServiceWithNonAdministratorsOnly
choco feature enable --name allowBackgroundServiceUninstallsFromUserInstallsOnly
choco config set --name allowedBackgroundServiceCommands --value "install,upgrade,uninstall"

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if ($ChocolateyCentralManagementUrl) {
    choco install chocolatey-agent --source $NugetRepositoryUrl --confirm
    choco config set --name CentralManagementServiceUrl --value $ChocolateyCentralManagementUrl
    if ($ChocolateyCentralManagementClientSalt) {
        choco config set --name centralManagementClientCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementClientSalt
    }
    if ($ChocolateyCentralManagementServiceSalt) {
        choco config set --name centralManagementServiceCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementServiceSalt
    }
    choco feature enable --name useChocolateyCentralManagement
    choco feature enable --name useChocolateyCentralManagementDeployments
}

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. chocolatey.chocolatey
##### You will require the chocolatey.chocolatey collection to be installed
##### on all machines using this playbook.
##### Please see https://github.com/chocolatey/chocolatey-ansible/#installing-the-collection-from-ansible-galaxy

- name: Install and Configure Chocolatey
  hosts: all

## 2. TOP LEVEL VARIABLES ##
  vars:

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
    nuget_repository_url: INTERNAL REPO URL

### b. Internal Repository Credential ###
#### If required, add the repository access credential here and
#### uncomment lines with source_username and source_password below
#    nuget_repository_username: username
#    nuget_repository_password: password

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#    chocolatey_central_management_url: https://chocolatey-central-management:24020/ChocolateyManagementService

#### ii. If using a Client Salt, add it here
#    chocolatey_central_management_client_salt: clientsalt

#### iii. If using a Service Salt, add it here
#    chocolatey_central_management_service_salt: servicesalt

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

  tasks:
  - name: Install chocolatey
    win_chocolatey:
      name: chocolatey
      source: ""{{ nuget_repository_url }}""
      # source_username: ""{{ nuget_repository_username }}""
      # source_password: ""{{ nuget_repository_password }}""

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#   - name: Enable FIPS compliance
#     win_chocolatey_feature:
#       name: useFipsCompliantChecksums
#       state: enabled

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
  - name: Set the cache location
    win_chocolatey_config:
      name: cacheLocation
      state: present
      value: C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
  - name: Set the command execution timeout
    win_chocolatey_config:
      name: commandExecutionTimeoutSeconds
      state: present
      value: 14400

#### Turn off download progress when running choco through integrations
  - name: Disable showing download progress
    win_chocolatey_feature:
      name: showDownloadProgress
      state: disabled

### c. Sources ###
#### Remove the default community package repository source
  - name: Remove Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey
      state: absent

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here
#### NOTE: This EXAMPLE may require changes
  - name: Add Internal Repository
    win_chocolatey_source:
      name: ChocolateyInternal
      state: present
      source: {{ nuget_repository_url }}
      # source_username: {{ nuget_repository_username }}
      # source_password: {{ nuget_repository_password }}
      priority: 1

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
  - name: Upgrade Chocolatey
    win_chocolatey:
      name: chocolatey
      state: latest

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.
### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
  - name: Install Chocolatey License
    win_chocolatey:
      name: chocolatey-license
      source: ChocolateyInternal
      state: latest

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
  - name: Disable Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey.licensed
      state: disabled

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
  - name: Install Chocolatey Extension
    win_chocolatey:
      name: chocolatey.extension
      source: ChocolateyInternal
      state: latest

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
  - name: Hide not-elevated warnings
    win_chocolatey_feature:
      name: showNonElevatedWarnings
      state: disabled

  - name: Use background mode for self-service
    win_chocolatey_feature:
      name: useBackgroundService
      state: enabled

  - name: Use background service for non-admins
    win_chocolatey_feature:
      name: useBackgroundServiceWithNonAdministratorsOnly
      state: enabled

  - name: Allow background uninstallation for user installs
    win_chocolatey_feature:
      name: allowBackgroundServiceUninstallsFromUserInstallsOnly
      state: enabled

  - name: Set allowed background service commands
    win_chocolatey_config:
      name: backgroundServiceAllowedCommands
      state: present
      value: install,upgrade,uninstall

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
  - name: Install Chocolatey Agent
    when: chocolatey_central_management_url is defined
    win_chocolatey:
      name: chocolatey-agent
      source: ChocolateyInternal
      state: latest

  - name: Set the Central Management Service URL
    when: chocolatey_central_management_url is defined
    win_chocolatey_config:
      name: CentralManagementServiceUrl
      state: present
      value: {{ chocolatey_central_management_url }}

  - name: Set the Central Management Client Salt
    when: chocolatey_central_management_client_salt is defined
    win_chocolatey_config:
      name: centralManagementClientCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_client_salt }}

  - name: Set the Central Management Service Salt
    when: chocolatey_central_management_service_salt is defined
    win_chocolatey_config:
      name: centralManagementServiceCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_service_salt }}

  - name: Use Central Management
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagement
      state: enabled

  - name: Use Central Management Deployments
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagementDeployments
      state: enabled

See docs at https://docs.chef.io/resource_chocolatey_package.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### The Chocolatey resources are available with any recent version of Chef.
#### We utilise the Chocolatey recipe to install the Chocolatey binaries.
include_recipe "chocolatey"

## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# NugetRepositoryUsername = "username"
# NugetRepositoryPassword = "password"

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
ChocolateyNupkgUrl = "INTERNAL REPO URL/package/chocolatey.2.3.0.nupkg",

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
node['chocolatey']['install vars'] = {
  'chocolateyDownloadUrl' => "#{ChocolateyNupkgUrl}",
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# chocolatey_feature 'useFipsCompliantChecksums' do
#   action :enable
# end

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolatey_config 'cacheLocation' do
  value 'C:\ProgramData\chocolatey\cache'
end

#### Increase timeout to at least 4 hours
chocolatey_config 'commandExecutionTimeoutSeconds' do
  value '14400'
end

#### Turn off download progress when running choco through integrations
chocolatey_feature 'showDownloadProgress' do
  action :disable
end

### c. Sources ###
#### Remove the default community package repository source
chocolatey_source 'chocolatey' do
  action :remove
end

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
chocolatey_source 'ChocolateyInternal' do
  source "#{NugetRepositoryUrl}"
  priority 1
  action   :add
end

execute 'ChocolateyInternal' do
  command "choco source add --name ChocolateyInternal -s #{NugetRepositoryUrl} -u=#{NugetRepositoryUsername} -p=#{NugetRepositoryPassword} --priority=1"
  only_if { NugetRepositoryUsername != nil || NugetRepositoryPassword != nil }
end

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
chocolatey_package 'chocolatey' do
  action :upgrade
  source "#{NugetRepositoryUrl}"
end

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
chocolatey_package 'chocolatey-license' do
  action :install
  source "#{NugetRepositoryUrl}"
end

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
chocolatey_source 'chocolatey.licensed' do
  action            :disable
end

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
chocolatey_package 'chocolatey.extention' do
  action     install
  source     "#{NugetRepositoryUrl}"
end

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolatey_feature 'showNonElevatedWarnings' do
  action :disable
end

chocolatey_feature 'useBackgroundService' do
  action :enable
end

chocolatey_feature 'useBackgroundServiceWithNonAdministratorsOnly' do
  action :enable
end

chocolatey_feature 'allowBackgroundServiceUninstallsFromUserInstallsOnly' do
  action :enable
end

chocolatey_config 'backgroundServiceAllowedCommands' do
  value 'install,upgrade,uninstall'
end

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
chocolatey_package 'chocolatey-agent' do
  action     install
  source     "#{NugetRepositoryUrl}"
  # user       "#{NugetRepositoryUsername}"
  # password   "#{NugetRepositoryPassword}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'CentralManagementServiceUrl' do
  value  "#{ChocolateyCentralManagementUrl}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'centralManagementClientCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementClientSalt}"
  only_if { ChocolateyCentralManagementClientSalt != nil }
end

chocolatey_config 'centralManagementServiceCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementServiceSalt}"
  only_if { ChocolateyCentralManagementServiceSalt != nil }
end

chocolatey_feature 'useChocolateyCentralManagement' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_feature 'useChocolateyCentralManagementDeployments' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.

If Applicable - Chocolatey Configuration/Installation


#requires -Modules cChoco
## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires chocolatey\cChoco DSC module to be installed on the machine compiling the DSC manifest
#### NOTE: This will need to be installed before running the DSC portion of this script
if (-not (Get-Module cChoco -ListAvailable)) {
    $null = Install-PackageProvider -Name NuGet -MinimumVersion 2.8.5.201 -Force
    if (($PSGallery = Get-PSRepository -Name PSGallery).InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy Trusted
    }
    Install-Module -Name cChoco
    if ($PSGallery.InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy $PSGallery.InstallationPolicy
    }
}

#### ii. Requires a hosted copy of the install.ps1 script
##### This should be available to download without authentication.
##### The original script can be found here: https://community.chocolatey.org/install.ps1

Configuration ChocolateyConfig {
## 2. TOP LEVEL VARIABLES ##
    param(
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
        $NugetRepositoryUrl      = "INTERNAL REPO URL",

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
        $ChocolateyNupkgUrl      = "INTERNAL REPO URL/package/chocolatey.2.3.0.nupkg",

### c. Internal Repository Credential ###
#### If required, add the repository access credential here
#        $NugetRepositoryCredential = [PSCredential]::new(
#            "username",
#            ("password" | ConvertTo-SecureString -AsPlainText -Force)
#        ),

### d. Install.ps1 URL
#### The path to the hosted install script:
        $ChocolateyInstallPs1Url = "https://community.chocolatey.org/install.ps1"

### e. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#        $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService",

#### ii. If using a Client Salt, add it here
#        $ChocolateyCentralManagementClientSalt = "clientsalt",

#### iii. If using a Service Salt, add it here
#        $ChocolateyCentralManagementServiceSalt = "servicesalt"
    )
    Import-DscResource -ModuleName PSDesiredStateConfiguration
    Import-DscResource -ModuleName cChoco

    Node 'localhost' {
## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
        Environment chocoDownloadUrl {
            Name  = "chocolateyDownloadUrl"
            Value = $ChocolateyNupkgUrl
        }

        cChocoInstaller installChocolatey {
            DependsOn = "[Environment]chocoDownloadUrl"
            InstallDir = Join-Path $env:ProgramData "chocolatey"
            ChocoInstallScriptUrl = $ChocolateyInstallPs1Url
        }

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#        cChocoFeature featureFipsCompliance {
#            FeatureName = "useFipsCompliantChecksums"
#        }

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
        cChocoConfig cacheLocation {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "cacheLocation"
            Value      = "C:\ProgramData\chocolatey\cache"
        }

#### Increase timeout to at least 4 hours
        cChocoConfig commandExecutionTimeoutSeconds {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "commandExecutionTimeoutSeconds"
            Value      = 14400
        }

#### Turn off download progress when running choco through integrations
        cChocoFeature showDownloadProgress {
            DependsOn   = "[cChocoInstaller]installChocolatey"
            FeatureName = "showDownloadProgress"
            Ensure      = "Absent"
        }

### c. Sources ###
#### Remove the default community package repository source
        cChocoSource removeCommunityRepository {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name       = "chocolatey"
            Ensure     = "Absent"
        }

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here.
#### NOTE: This EXAMPLE may require changes
        cChocoSource addInternalSource {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name        = "ChocolateyInternal"
            Source      = $NugetRepositoryUrl
            Credentials = $NugetRepositoryCredential
            Priority    = 1
        }

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
        cChocoPackageInstaller updateChocolatey {
            DependsOn   = "[cChocoSource]addInternalSource", "[cChocoSource]removeCommunityRepository"
            Name        = "chocolatey"
            AutoUpgrade = $true
        }

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
        cChocoPackageInstaller chocolateyLicense {
            DependsOn = "[cChocoPackageInstaller]updateChocolatey"
            Name      = "chocolatey-license"
        }

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
        Script disableLicensedSource {
            DependsOn  = "[cChocoPackageInstaller]chocolateyLicense"
            GetScript  = {
                $Source = choco source list --limitoutput | `
                    ConvertFrom-Csv -Delimiter '|' -Header Name, Source, Disabled | `
                    Where-Object Name -eq "chocolatey.licensed"

                return @{
                    Result = if ($Source) {
                        [bool]::Parse($Source.Disabled)
                    } else {
                        Write-Warning "Source 'chocolatey.licensed' was not present."
                        $true  # Source does not need disabling
                    }
                }
            }
            SetScript  = {
                $null = choco source disable --name "chocolatey.licensed"
            }
            TestScript = {
                $State = [ScriptBlock]::Create($GetScript).Invoke()
                return $State.Result
            }
        }

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
        cChocoPackageInstaller chocolateyLicensedExtension {
            DependsOn = "[Script]disableLicensedSource"
            Name      = "chocolatey.extension"
        }

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
        cChocoFeature hideElevatedWarnings {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "showNonElevatedWarnings"
            Ensure      = "Absent"
        }

        cChocoFeature useBackgroundService {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundService"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceWithNonAdmins {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundServiceWithNonAdministratorsOnly"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceUninstallsForUserInstalls {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "allowBackgroundServiceUninstallsFromUserInstallsOnly"
            Ensure      = "Present"
        }

        cChocoConfig allowedBackgroundServiceCommands {
            DependsOn   = "[cChocoFeature]useBackgroundService"
            ConfigName = "backgroundServiceAllowedCommands"
            Value       = "install,upgrade,uninstall"
        }

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
        if ($ChocolateyCentralManagementUrl) {
            cChocoPackageInstaller chocolateyAgent {
                DependsOn = "[cChocoPackageInstaller]chocolateyLicensedExtension"
                Name      = "chocolatey-agent"
            }

            cChocoConfig centralManagementServiceUrl {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                ConfigName = "CentralManagementServiceUrl"
                Value       = $ChocolateyCentralManagementUrl
            }

            if ($ChocolateyCentralManagementClientSalt) {
                cChocoConfig centralManagementClientSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementClientCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementClientSalt
                }
            }

            if ($ChocolateyCentralManagementServiceSalt) {
                cChocoConfig centralManagementServiceSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementServiceCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementServiceSalt
                }
            }

            cChocoFeature useCentralManagement {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagement"
                Ensure      = "Present"
            }

            cChocoFeature useCentralManagementDeployments {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagementDeployments"
                Ensure      = "Present"
            }
        }
    }
}

# If working this into an existing configuration with a good method for
$ConfigData = @{
    AllNodes = @(
        @{
            NodeName                    = "localhost"
            PSDscAllowPlainTextPassword = $true
        }
    )
}

try {
    Push-Location $env:Temp
    $Config = ChocolateyConfig -ConfigurationData $ConfigData
    Start-DscConfiguration -Path $Config.PSParentPath -Wait -Verbose -Force
} finally {
    Pop-Location
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires puppetlabs/chocolatey module
####  See https://forge.puppet.com/puppetlabs/chocolatey


## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$_repository_url = 'INTERNAL REPO URL'

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
$_choco_download_url = 'INTERNAL REPO URL/package/chocolatey.2.3.0.nupkg'

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $_chocolatey_central_management_url = 'https://chocolatey-central-management:24020/ChocolateyManagementService'

#### ii. If using a Client Salt, add it here
# $_chocolatey_central_management_client_salt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $_chocolatey_central_management_service_salt = 'servicesalt'


## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
### Note: `chocolatey_download_url is completely different than normal
###  source locations. This is directly to the bare download url for the
###  chocolatey.nupkg, similar to what you see when you browse to
###  https://community.chocolatey.org/api/v2/package/chocolatey
class {'chocolatey':
  chocolatey_download_url => $_choco_download_url,
  use_7zip                => false,
}


## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations

#chocolateyfeature {'useFipsCompliantChecksums':
#  ensure => enabled,
#}

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolateyconfig {'cacheLocation':
  value => 'C:\ProgramData\chocolatey\cache',
}

#### Increase timeout to at least 4 hours
chocolateyconfig {'commandExecutionTimeoutSeconds':
  value => '14400',
}

#### Turn off download progress when running choco through integrations
chocolateyfeature {'showDownloadProgress':
  ensure => disabled,
}

### c. Sources ###
#### Remove the default community package repository source
chocolateysource {'chocolatey':
  ensure   => absent,
  location => 'https://community.chocolatey.org/api/v2/',
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE requires changes
chocolateysource {'internal_chocolatey':
  ensure             => present,
  location           => $_repository_url,
  priority           => 1,
  username           => 'optional',
  password           => 'optional,not ensured',
  bypass_proxy       => true,
  admin_only         => false,
  allow_self_service => false,
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/

package {'chocolatey':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}


## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/guides/organizations/organizational-deployment-guide#exercise-4-create-a-package-for-the-license

# TODO: Add resource for installing/ensuring the chocolatey-license package
package {'chocolatey-license':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
## Disabled sources still need all other attributes until
## https://tickets.puppetlabs.com/browse/MODULES-4449 is resolved.
## Password is necessary with user, but not ensurable, so it should not
## matter what it is set to here. If you ever do get into trouble here,
## the password is your license GUID.
chocolateysource {'chocolatey.licensed':
  ensure   => disabled,
  priority => '10',
  user     => 'customer',
  password => '1234',
  require  => Package['chocolatey-license'],
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
package {'chocolatey.extension':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
  require  => Package['chocolatey-license'],
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolateyfeature {'showNonElevatedWarnings':
  ensure => disabled,
}

chocolateyfeature {'useBackgroundService':
  ensure => enabled,
}

chocolateyfeature {'useBackgroundServiceWithNonAdministratorsOnly':
  ensure => enabled,
}

chocolateyfeature {'allowBackgroundServiceUninstallsFromUserInstallsOnly':
  ensure => enabled,
}

chocolateyconfig {'backgroundServiceAllowedCommands':
  value => 'install,upgrade,uninstall',
}

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if $_chocolatey_central_management_url {
  package {'chocolatey-agent':
    ensure   => latest,
    provider => chocolatey,
    source   => $_repository_url,
    require  => Package['chocolatey-license'],
  }

  chocolateyconfig {'CentralManagementServiceUrl':
    value   => $_chocolatey_central_management_url,
  }

  if $_chocolatey_central_management_client_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  if $_chocolatey_central_management_service_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  chocolateyfeature {'useChocolateyCentralManagement':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }

  chocolateyfeature {'useChocolateyCentralManagementDeployments':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }
}

Need Help? View our docs or file an issue.

There is already a version of this package in your Script Builder

Current Version	New Version

Downloads:

194,029

Downloads of v 0.19.0.23721-dev:

254

Last Update:

22 Jan 2021

Package Maintainer(s):

chocolatey-community

Software Author(s):

Jürgen Riegel

Tags:

freecad 3d cad modeling engineering admin

FreeCAD

This is a prerelease version of FreeCAD.

0.19.0.23721-dev | Updated: 22 Jan 2021

Downloads:

194,029

Downloads of v 0.19.0.23721-dev:

254

Maintainer(s):

chocolatey-community

Software Author(s):

Jürgen Riegel

Tags:

freecad 3d cad modeling engineering admin

FreeCAD 0.19.0.23721-dev

This is a prerelease version of FreeCAD.

Some Checks Have Failed or Are Not Yet Complete

Not All Tests Have Passed

Hide Checks

Validation Testing Passed

Verification Testing Passed

Details

Scan Testing Resulted in Flagged:

This package was submitted (and approved) prior to automated virus scanning integration into the package moderation processs.

We recommend clicking the "Details" link to make your own decision on installing this package.

Details

Learn More

Deployment Method: Individual Install, Upgrade, & Uninstall

To install FreeCAD, run the following command from the command line or from PowerShell:

To upgrade FreeCAD, run the following command from the command line or from PowerShell:

To uninstall FreeCAD, run the following command from the command line or from PowerShell:

NOTE

This applies to both open source and commercial editions of Chocolatey.

1. Enter Your Internal Repository Url

(this should look similar to https://community.chocolatey.org/api/v2/)

2. Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the package and push it to a repository Download

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the package:
  Download
- Follow manual internalization instructions

Package Internalizer (C4B)

Run: (additional options)

choco download freecad --internalize --version=0.19.0.23721-dev --pre --source=https://community.chocolatey.org/api/v2/

For package and dependencies run:

choco push --source="'INTERNAL REPO URL'"

Automate package internalization

3. Copy Your Script

choco upgrade freecad -y --source="'INTERNAL REPO URL'" --version="'0.19.0.23721-dev'" --prerelease [other options]

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:


choco upgrade freecad -y --source="'INTERNAL REPO URL'" --version="'0.19.0.23721-dev'" --prerelease
$exitCode = $LASTEXITCODE

Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
  Exit 0
}

Exit $exitCode


- name: Install freecad
  win_chocolatey:
    name: freecad
    version: '0.19.0.23721-dev'
    source: INTERNAL REPO URL
    state: present
    allow_prerelease: yes

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.


chocolatey_package 'freecad' do
  action    :install
  source   'INTERNAL REPO URL'
  version  '0.19.0.23721-dev'
  options  '--prerelease'
end

See docs at https://docs.chef.io/resource_chocolatey_package.html.


cChocoPackageInstaller freecad
{
    Name        = "freecad"
    Version     = "0.19.0.23721-dev"
    Source      = "INTERNAL REPO URL"
    chocoParams = "--prerelease"
}

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.


package { 'freecad':
  ensure          => '0.19.0.23721-dev',
  install_options => ['--prerelease'],
  provider        => 'chocolatey',
  source          => 'INTERNAL REPO URL',
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

4. If applicable - Chocolatey configuration/installation

See infrastructure management matrix for Chocolatey configuration elements and examples.

Package Approved

This package was approved as a trusted package on 22 Jan 2021.

Description

FreeCAD is a general purpose feature-based, parametric 3D modeler for CAD, MCAD, CAx, CAE and PLM, aimed directly at mechanical engineering and product design but also fits a wider range of uses in engineering, such as architecture or other engineering specialties. It is 100 % Open Source and extremely modular, allowing for very advanced extension and customization.

FreeCAD is based on OpenCasCade, a powerful geometry kernel, features an Open Inventor-compliant 3D scene representation model provided by the Coin 3D library, and a broad Python API. The interface is built with Qt. FreeCAD runs exactly the same way on Windows, Mac OSX and Linux platforms.

Features

A full parametric model,and modular architecture that allows plugin extensions (modules) to add functionality to the core application.
Import/export to standard formats such as STEP, IGES, OBJ, STL, DXF, SVG, STL, DAE, IFC or OFF, NASTRAN, VRML in addition to FreeCAD's native FCStd file format.
A Robot simulation module that allows you to study robot movements in a graphical environment.
A technical drawing module with options for detail views, cross sectional views, dimensioning and others, allowing you to generate 2D views of existing 3D models.
A Rendering module that can export 3D objects for rendering with external renderers.
A Path module dedicated to mechanical machining for Computer Aided Manufacturing (CAM).

Package parameters

Used only for Portable or Pre Releases Currently

/InstallDir - This is the location inside the Chocolatey lib folder specific to this package.
/Arguments - This will allow you to specify any of the FreeCAD command line arguements.
/NoShortcut - This will not set a Shortcut on the Desktop.
/WindowStyle - The normal window setting for most Applications is as a Window. Maximised Window would be 3.

Example: choco install freecad --params "/InstallDir:'C:\FreeCAD' /NoShortcut"

Files

tools\chocolateyInstall.ps1

$ErrorActionPreference = 'Stop';

 if(!$PSScriptRoot){ $PSScriptRoot = Split-Path $MyInvocation.MyCommand.Path -Parent }
. "$PSScriptRoot\helper.ps1"

$packageArgs = @{
  packageName    = 'freecad'
  fileType       = '7z'
  url            = ''
  url64          = 'https://github.com/FreeCAD/FreeCAD/releases/download/0.19_pre/FreeCAD_0.19.23721-Win-Conda_vc14.x-x86_64.7z'
  softwareName   = 'FreeCAD'
  checksum       = ''
  checksumType   = ''
  checksum64     = 'E7F36F583E03660F28310D5196391E6CAF6DA0030F99A0C22238BF1674E21AEA'
  checksumType64 = 'sha256'
  silentArgs     = '/S'
  validExitCodes = @(0)
}

if ( $packageArgs.filetype -eq '7z' ) {
  # Checking for Package Parameters
  $pp = ( Get-UserPackageParams -scrawl )
  if ($packageArgs.url64 -match "Conda") { $packageArgs.Remove("url"); $packageArgs.Remove("checksum"); $packageArgs.Remove("checksumType"); }
  if ($pp.InstallDir) { $packageArgs.Add( "UnzipLocation", $pp.InstallDir ) }
  Install-ChocolateyZipPackage @packageArgs
  if ($pp.Shortcut) { $pp.Remove("Shortcut"); Install-ChocolateyShortcut @pp }
  $files = get-childitem $pp.WorkingDirectory -Exclude $packageArgs.softwareName -include *.exe -recurse
  foreach ($file in $files) {
    New-Item "$file.ignore" -type file -force | Out-Null # Generate an ignore file(s)
  }
} else {
  Install-ChocolateyPackage @packageArgs
}

tools\chocolateyUninstall.ps1

$ErrorActionPreference = 'Stop';

if(!$PSScriptRoot){ $PSScriptRoot = Split-Path $MyInvocation.MyCommand.Path -Parent }

$packageArgs = @{
  packageName   = 'freecad'
  softwareName  = 'FreeCAD'
  fileType      = '7z'
  silentArgs    = '/S'
  validExitCodes= @(@(0))
}

if ( $packageArgs.fileType -match 'exe' ) {
	$uninstalled = $false
	[array]$key = Get-UninstallRegistryKey @packageArgs
  if ($key.Count -eq 1) {
   $key | ForEach-Object {
   $packageArgs['file'] = "$($_.UninstallString)"
   Uninstall-ChocolateyPackage @packageArgs
   }
  } elseif ($key.Count -eq 0) {
   Write-Warning "$packageName has already been uninstalled by other means."
  } elseif ($key.Count -gt 1) {
   Write-Warning "$($key.Count) matches found!"
   Write-Warning "To prevent accidental data loss, no programs will be uninstalled."
   Write-Warning "Please alert the package maintainer that the following keys were matched:"
   $key | ForEach-Object { Write-Warning "- $($_.DisplayName)" }
  }
} else {
$pp = ( Get-Content "$PSScriptRoot\pp.json" ) | ConvertFrom-Json 
if ($pp.ShortcutFilePath) { Remove-Item -Path $pp.ShortcutFilePath }
if ($pp.InstallDir) { Remove-Item  -Path $pp.InstallDir -ErrorAction SilentlyContinue -Recurse -Force }
Write-Information "All files Removed"
}

tools\helper.ps1


$toolsDir = "$(Split-Path -Parent $MyInvocation.MyCommand.Definition)"

function Get-FileName {
param(
    [hashtable]$thePackage
)
$fileName = ((($thePackage.url64 -split('/'))[-1]) -replace( "\.$($thePackage.fileType)", '' ) )
 if ($fileName -match "portable") { 
	$version = ((($thePackage.url64 -split('/'))[-2]) -replace( "[A-z]", '' ) )
  if ($version -ge "0.18.4") { $fileName = "conda-${version}" }
 }
return $fileName
}

function Get-UserPackageParams {
param(
    [hashtable]$pp = ( Get-PackageParameters ),
	[parameter(Mandatory=$false)][switch]$scrawl
)
$folderName = ( Get-FileName -thePackage $packageArgs )
$New_pp = @{}
	if ([string]::IsNullOrEmpty($pp.InstallDir)) {
		$New_pp.add( "InstallDir", "$toolsDir" )
	} else {
		$New_pp.add( "InstallDir", $pp.InstallDir )
	}
	if ([string]::IsNullOrEmpty($pp.WindowStyle)) {
		$New_pp.add( "WindowStyle", 1 )
	} else {
		$New_pp.add( "WindowStyle", $pp.WindowStyle )
	}
	if ([string]::IsNullOrEmpty($pp.WorkingDirectory)) {
		$New_pp.add( "WorkingDirectory", $New_pp.InstallDir+"\$folderName" )
	} else {
		$New_pp.add( "WorkingDirectory", $pp.WorkingDirectory )
	}
	if ([string]::IsNullOrEmpty($pp.Description)) {
		$Naming = @{$true="";$false="Development"}[ ($folderName -match "0.18.4")]
		$New_pp.add( "Description", "FreeCAD $Naming ${env:ChocolateyPackageVersion}" )
	} else { 
		$New_pp.add( "Description", $pp.Description )
	}
	# Null or False Defaults
	if (![string]::IsNullOrEmpty($pp.Arguments)) {
		$New_pp.add( "Arguments", $pp.Arguments )
	} 
	if (![string]::IsNullOrEmpty($pp.PinToTaskbar)) {
		$New_pp.add( "PinToTaskbar", $true )
	}
	if (![string]::IsNullOrEmpty($pp.RunAsAdmin)) {
		$New_pp.add( "RunAsAdmin", $true )
	}
	if ([string]::IsNullOrEmpty($pp.NoShortcut)) {
		$New_pp.add( "Shortcut", $true )
		if ([string]::IsNullOrEmpty($this.ShortcutFilePath)) {
		 $New_pp.add( "ShortcutFilePath", ( [Environment]::GetFolderPath('Desktop') )+"\"+$packageArgs.PackageName+".lnk" )
		} else {
		 $New_pp.add( "ShortcutFilePath", $pp.ShortcutFilePath )
		}
		if ([string]::IsNullOrEmpty($this.TargetPath)) {
		 $New_pp.add( "TargetPath", $New_pp.WorkingDirectory+"\bin\"+$packageArgs.softwareName+".exe" )
		} else {
		 $New_pp.add( "TargetPath", $pp.TargetPath )
		}
		if ([string]::IsNullOrEmpty($pp.IconLocation)) {
		 $New_pp.add( "IconLocation", $New_pp.TargetPath )
		} else { 
		 $New_pp.add( "IconLocation", $pp.IconLocation )
		}
	}
	if ($scrawl) {
		$New_pp | ConvertTo-Json | Out-File ( "$toolsDir\pp.json" )
	}

    return $New_pp
}

Virus Scan Results

wininst-6.0.exe (751941b4e098) - ## / 73
wininst-7.1.exe (4a3387a54eec) - ## / 73
wininst-8.0.exe (e362670f93cd) - ## / 74
wininst-10.0-amd64.exe (b2e32b3fa44b) - ## / 74
wininst-10.0.exe (1aa3927c7985) - ## / 74
wininst-9.0-amd64.exe (84fe7824717b) - ## / 74
wininst-9.0.exe (13b98844b2fa) - ## / 74
cli-32.exe (75f12ea2f30d) - ## / 72
cli-64.exe (28b001bb9a72) - ## / 72
gui-32.exe (5c1af46c7300) - ## / 72
gui-64.exe (69828c857d48) - ## / 72
sample.xml.gz (fc0a69d302a9) - ## / 58
opengl32sw.dll (963641a718f9) - ## / 75
wininst-14.0-amd64.exe (0cf9864ae3a8) - ## / 74
wininst-14.0.exe (cd8e84c1f8d1) - ## / 74
t32.exe (352df1042540) - ## / 74
t64.exe (a00a877acefc) - ## / 71
w32.exe (949b6765d794) - ## / 72
w64.exe (d1a473a0dd81) - ## / 73
dateutil-zoneinfo.tar.gz (e9b6492ab377) - ## / 57
2to3.exe (5ea569f2b5bc) - ## / 69
jsoncpp.dll (1366f62a403b) - ## / 72
libffi-7.dll (f60dd9f2fcbd) - ## / 73
nglib.dll (bb4043c29e07) - ## / 71
pthreadVSE2.dll (73873a9db28f) - ## / 72
tcl86t.dll (f650d6bc321b) - ## / 65
tk86t.dll (1a6d0871be2f) - ## / 65
Driver.dll (6bff3a14a84b) - ## / 71
DriverDAT.dll (3aaa8ee02bc0) - ## / 72
DriverGMF.dll (2b085ee3901e) - ## / 68
DriverSTL.dll (8fbe5cab446f) - ## / 68
DriverUNV.dll (3f3aec346c3f) - ## / 69
flann.dll (913058d26303) - ## / 71
flann_cpp.dll (eb02693ffbfd) - ## / 72
FreeImage.dll (ca00532a89ef) - ## / 71
MEFISTO2.dll (846e41b7ab08) - ## / 70
NETGENPlugin.dll (58120fd6b9d8) - ## / 72
SMDS.dll (0f8282cb8d8d) - ## / 72
SMESH.dll (67b00a0ed635) - ## / 67
SMESHBasics.dll (928541860c49) - ## / 70
SMESHControls.dll (b131385f4116) - ## / 72
SMESHDS.dll (dd63cda4a641) - ## / 71
SMESHMisc.dll (c43c88efb134) - ## / 70
SMESHTrace.dll (62dd8a0f3ebb) - ## / 72
SMESHUtils.dll (5bd7d5d7b0f2) - ## / 69
StdMeshers.dll (ace9061c19d4) - ## / 72
vtkChartsCore-8.2.dll (50d3feedf6c4) - ## / 72
vtkChartsCorePython38D-8.2.dll (94bca7a2d561) - ## / 72
vtkCommonColor-8.2.dll (18a96b7b495c) - ## / 71
vtkCommonColorPython38D-8.2.dll (35a55983d92c) - ## / 70
vtkCommonComputationalGeometry-8.2.dll (8707457afac9) - ## / 72
vtkCommonComputationalGeometryPython38D-8.2.dll (94cd887d602c) - ## / 72
vtkCommonCore-8.2.dll (2601feeb9c6b) - ## / 68
vtkCommonCorePython38D-8.2.dll (11fde6342107) - ## / 71
vtkCommonDataModel-8.2.dll (2f690f7ceaa5) - ## / 72
vtkCommonDataModelPython38D-8.2.dll (0f3abff4015d) - ## / 72
vtkCommonExecutionModel-8.2.dll (b7cbbd2e54dd) - ## / 72
vtkCommonExecutionModelPython38D-8.2.dll (64ddd9963368) - ## / 66
vtkCommonMath-8.2.dll (e82cf70a3857) - ## / 73
vtkCommonMathPython38D-8.2.dll (c2fce8ec5ee3) - ## / 73
vtkCommonMisc-8.2.dll (ac72524b6750) - ## / 69
vtkCommonMiscPython38D-8.2.dll (dac772068f8c) - ## / 72
vtkCommonSystem-8.2.dll (11c12956409d) - ## / 72
vtkCommonSystemPython38D-8.2.dll (8adc647a597d) - ## / 72
vtkCommonTransforms-8.2.dll (2655c96a02f2) - ## / 72
vtkCommonTransformsPython38D-8.2.dll (646eda87dca3) - ## / 72
vtkDICOMParser-8.2.dll (43beb6e14bc7) - ## / 72
vtkDomainsChemistry-8.2.dll (c5bd23ab4b9d) - ## / 71
vtkDomainsChemistryOpenGL2-8.2.dll (2e0164682742) - ## / 72
vtkDomainsChemistryOpenGL2Python38D-8.2.dll (18382674756e) - ## / 71
vtkDomainsChemistryPython38D-8.2.dll (8e586a017cb4) - ## / 72
vtkdoubleconversion-8.2.dll (409c0fe1b007) - ## / 72
vtkexodusII-8.2.dll (ffd1b5335243) - ## / 72
vtkFiltersAMR-8.2.dll (8a02e29a4748) - ## / 72
vtkFiltersAMRPython38D-8.2.dll (cdf41983711f) - ## / 72
vtkFiltersCore-8.2.dll (f3b26ec5a8d8) - ## / 72
vtkFiltersCorePython38D-8.2.dll (1ed3954d636e) - ## / 72
vtkFiltersExtraction-8.2.dll (4c110859a621) - ## / 71
vtkFiltersExtractionPython38D-8.2.dll (073dc04a9467) - ## / 72
vtkFiltersFlowPaths-8.2.dll (9170ec2fc428) - ## / 68
vtkFiltersFlowPathsPython38D-8.2.dll (2d699fe44ef1) - ## / 72
vtkFiltersGeneral-8.2.dll (7b0190c80d3e) - ## / 71
vtkFiltersGeneralPython38D-8.2.dll (42e74f2e725a) - ## / 72
vtkFiltersGeneric-8.2.dll (28fe7f58b3dc) - ## / 72
vtkFiltersGenericPython38D-8.2.dll (3ffe82b92b1b) - ## / 72
vtkFiltersGeometry-8.2.dll (8c3ba5399d65) - ## / 72
vtkFiltersGeometryPython38D-8.2.dll (ce3dd6f87107) - ## / 72
vtkFiltersHybrid-8.2.dll (f50dd426ba52) - ## / 72
vtkFiltersHybridPython38D-8.2.dll (467db74164bd) - ## / 73
vtkFiltersHyperTree-8.2.dll (ebeaf4b82c2b) - ## / 72
vtkFiltersHyperTreePython38D-8.2.dll (868e1d5d6f9d) - ## / 72
vtkFiltersImaging-8.2.dll (c2fd7fe5e7e5) - ## / 72
vtkFiltersImagingPython38D-8.2.dll (755f75c6c164) - ## / 72
vtkFiltersModeling-8.2.dll (b2b0f688ac87) - ## / 72
vtkFiltersModelingPython38D-8.2.dll (6c1ac76142d5) - ## / 72
vtkFiltersParallel-8.2.dll (007c08ca037a) - ## / 72
vtkFiltersParallelImaging-8.2.dll (4326135eede0) - ## / 73
vtkFiltersParallelImagingPython38D-8.2.dll (161f6410067e) - ## / 72
vtkFiltersParallelPython38D-8.2.dll (6907c07cda06) - ## / 72
vtkFiltersPoints-8.2.dll (c428bb07c982) - ## / 73
vtkFiltersPointsPython38D-8.2.dll (74adc4545c61) - ## / 71
vtkFiltersProgrammable-8.2.dll (c28e221a1f92) - ## / 72
vtkFiltersProgrammablePython38D-8.2.dll (e9a9c9d10f58) - ## / 71
vtkFiltersPython-8.2.dll (7ce0b02e9b65) - ## / 72
vtkFiltersPythonPython38D-8.2.dll (e2d0a17cec48) - ## / 72
vtkFiltersSelection-8.2.dll (0029f1cbf03e) - ## / 71
vtkFiltersSelectionPython38D-8.2.dll (4a20020fcf27) - ## / 73
vtkFiltersSMP-8.2.dll (4836ee3128b3) - ## / 72
vtkFiltersSMPPython38D-8.2.dll (90e0fd9687db) - ## / 72
vtkFiltersSources-8.2.dll (d1249276d157) - ## / 72
vtkFiltersSourcesPython38D-8.2.dll (56ca22f6a5fb) - ## / 72
vtkFiltersStatistics-8.2.dll (b6208ec23c46) - ## / 70
vtkFiltersStatisticsPython38D-8.2.dll (f16201e692db) - ## / 71
vtkFiltersTexture-8.2.dll (e90e0c4c9a3f) - ## / 70
vtkFiltersTexturePython38D-8.2.dll (2406b5faeeac) - ## / 72
vtkFiltersTopology-8.2.dll (3c3566b5d549) - ## / 72
vtkFiltersTopologyPython38D-8.2.dll (030071c9abec) - ## / 72
vtkFiltersVerdict-8.2.dll (50d14d61bf51) - ## / 70
vtkFiltersVerdictPython38D-8.2.dll (cf9778046062) - ## / 70
vtkGeovisCore-8.2.dll (60a8b8aed7d3) - ## / 72
vtkGeovisCorePython38D-8.2.dll (03b9b317ff0c) - ## / 72
vtkgl2ps-8.2.dll (a22aae998ceb) - ## / 72
vtkglew-8.2.dll (2b5ab7be6d7e) - ## / 68
vtkImagingColor-8.2.dll (469dc445f082) - ## / 72
vtkImagingColorPython38D-8.2.dll (461053264e3e) - ## / 72
vtkImagingCore-8.2.dll (4c05a2ef5797) - ## / 72
vtkImagingCorePython38D-8.2.dll (7897ffcc0d20) - ## / 72
vtkImagingFourier-8.2.dll (70df427f2326) - ## / 71
vtkImagingFourierPython38D-8.2.dll (925c583bc0ed) - ## / 70
vtkImagingGeneral-8.2.dll (d191d69b7fe2) - ## / 72
vtkImagingGeneralPython38D-8.2.dll (5328b82b0758) - ## / 72
vtkImagingHybrid-8.2.dll (7a04df1c9c9c) - ## / 71
vtkImagingHybridPython38D-8.2.dll (cc1f4d5e0026) - ## / 72
vtkImagingMath-8.2.dll (735c411517e9) - ## / 72
vtkImagingMathPython38D-8.2.dll (009e0c411b7a) - ## / 72
vtkImagingMorphological-8.2.dll (8a3b761dd3f8) - ## / 71
vtkImagingMorphologicalPython38D-8.2.dll (cc5790f5a9f3) - ## / 67
vtkImagingSources-8.2.dll (aeb310b11b2c) - ## / 72
vtkImagingSourcesPython38D-8.2.dll (45e755cfa206) - ## / 71
vtkImagingStatistics-8.2.dll (9dba4a25a728) - ## / 72
vtkImagingStatisticsPython38D-8.2.dll (24da2bdbe47a) - ## / 71
vtkImagingStencil-8.2.dll (262ef2c1f23e) - ## / 73
vtkImagingStencilPython38D-8.2.dll (af8e9b5e63c5) - ## / 72
vtkInfovisCore-8.2.dll (c8e89b3da02a) - ## / 72
vtkInfovisCorePython38D-8.2.dll (98fecdbabd4a) - ## / 72
vtkInfovisLayout-8.2.dll (8f1ea962bc88) - ## / 72
vtkInfovisLayoutPython38D-8.2.dll (ee2599597d0c) - ## / 72
vtkInteractionImage-8.2.dll (516d5ab7204c) - ## / 71
vtkInteractionImagePython38D-8.2.dll (20e0fc330d5f) - ## / 72
vtkInteractionStyle-8.2.dll (3d1d95dc150f) - ## / 70
vtkInteractionStylePython38D-8.2.dll (b7e78c2175f2) - ## / 72
vtkInteractionWidgets-8.2.dll (2c51bc2c5261) - ## / 71
vtkInteractionWidgetsPython38D-8.2.dll (67238c32b6b9) - ## / 72
vtkIOAMR-8.2.dll (dff0d687aa2d) - ## / 72
vtkIOAMRPython38D-8.2.dll (45fb81c963ae) - ## / 72
vtkIOAsynchronous-8.2.dll (b2b1de36b5ce) - ## / 72
vtkIOAsynchronousPython38D-8.2.dll (a5ee86520808) - ## / 72
vtkIOCityGML-8.2.dll (cc2c7e2e38c8) - ## / 72
vtkIOCityGMLPython38D-8.2.dll (1a57a6da9d20) - ## / 72
vtkIOCore-8.2.dll (9abff6acf350) - ## / 68
vtkIOCorePython38D-8.2.dll (25f53cc31fca) - ## / 72
vtkIOEnSight-8.2.dll (063f929ebf74) - ## / 71
vtkIOEnSightPython38D-8.2.dll (9aa64f3c5eae) - ## / 72
vtkIOExodus-8.2.dll (59fcbcd2c91c) - ## / 72
vtkIOExodusPython38D-8.2.dll (6d9c40c3d86a) - ## / 72
vtkIOExport-8.2.dll (da403ebf80af) - ## / 72
vtkIOExportOpenGL2-8.2.dll (ccb371888c59) - ## / 72
vtkIOExportOpenGL2Python38D-8.2.dll (6a41cb4af58b) - ## / 72
vtkIOExportPDF-8.2.dll (f661f5911efb) - ## / 72
vtkIOExportPDFPython38D-8.2.dll (0f41017d37af) - ## / 72
vtkIOExportPython38D-8.2.dll (1caa9038a767) - ## / 72
vtkIOGeometry-8.2.dll (eb3210d87edb) - ## / 70
vtkIOGeometryPython38D-8.2.dll (51f37afa22b2) - ## / 67
vtkIOImage-8.2.dll (1f802f2de15e) - ## / 72
vtkIOImagePython38D-8.2.dll (574a5ea4f075) - ## / 72
vtkIOImport-8.2.dll (b368a0eb2a24) - ## / 72
vtkIOImportPython38D-8.2.dll (fe43d66e8ffd) - ## / 72
vtkIOInfovis-8.2.dll (55f7ca56452b) - ## / 69
vtkIOInfovisPython38D-8.2.dll (01576768be70) - ## / 72
vtkIOLegacy-8.2.dll (5b4a30e319d7) - ## / 69
vtkIOLegacyPython38D-8.2.dll (9c2c319f40c5) - ## / 71
vtkIOLSDyna-8.2.dll (4f022346c261) - ## / 71
vtkIOLSDynaPython38D-8.2.dll (683e8651107e) - ## / 71
vtkIOMINC-8.2.dll (cfa4e67b6d9b) - ## / 72
vtkIOMINCPython38D-8.2.dll (ef565f8aa7b1) - ## / 72
vtkIOMovie-8.2.dll (51a780ea5348) - ## / 71
vtkIOMoviePython38D-8.2.dll (1c3dadcddee1) - ## / 72
vtkIONetCDF-8.2.dll (b4ca02f3568e) - ## / 72
vtkIONetCDFPython38D-8.2.dll (1f6f8f1208ab) - ## / 72
vtkIOParallel-8.2.dll (53e22cc40813) - ## / 72
vtkIOParallelPython38D-8.2.dll (8c8ee8af6f7d) - ## / 71
vtkIOParallelXML-8.2.dll (50ec2ab00291) - ## / 71
vtkIOParallelXMLPython38D-8.2.dll (9690009adb0b) - ## / 71
vtkIOPLY-8.2.dll (c90ce69fed12) - ## / 72
vtkIOPLYPython38D-8.2.dll (4d04d97174cd) - ## / 71
vtkIOSegY-8.2.dll (d0c1b2e65000) - ## / 72
vtkIOSegYPython38D-8.2.dll (ad8866fd7030) - ## / 71
vtkIOSQL-8.2.dll (650531d9c1b7) - ## / 71
vtkIOSQLPython38D-8.2.dll (aadb3fd98a50) - ## / 72
vtkIOTecplotTable-8.2.dll (cfd1ce48b4d5) - ## / 72
vtkIOTecplotTablePython38D-8.2.dll (02a1a690f138) - ## / 72
vtkIOVeraOut-8.2.dll (0c8ea787c8bd) - ## / 72
vtkIOVeraOutPython38D-8.2.dll (25abbc0834ea) - ## / 72
vtkIOVideo-8.2.dll (7ab93874d5bf) - ## / 72
vtkIOVideoPython38D-8.2.dll (a3ad85e805c5) - ## / 72
vtkIOXdmf2-8.2.dll (0e5c52be26ac) - ## / 72
vtkIOXdmf2Python38D-8.2.dll (8071a6915764) - ## / 72
vtkIOXML-8.2.dll (016c59a27864) - ## / 70
vtkIOXMLParser-8.2.dll (124ca6404918) - ## / 72
vtkIOXMLParserPython38D-8.2.dll (237ca56e25fc) - ## / 71
vtkIOXMLPython38D-8.2.dll (7beeaa6e644e) - ## / 72
vtklibharu-8.2.dll (2f683fcb0293) - ## / 71
vtklzma-8.2.dll (c7763c33d5df) - ## / 72
vtkmetaio-8.2.dll (8d4759f28ae1) - ## / 72
vtkogg-8.2.dll (29391b0f706a) - ## / 72
vtkParallelCore-8.2.dll (6df3fa6234c7) - ## / 72
vtkParallelCorePython38D-8.2.dll (dddd7818bc4b) - ## / 72
vtkproj-8.2.dll (7ba52b32cdb0) - ## / 72
vtkpugixml-8.2.dll (b0daa647aa5a) - ## / 67
vtkPythonContext2D-8.2.dll (2367dfab6191) - ## / 67
vtkPythonContext2DPython38D-8.2.dll (6b640005a93a) - ## / 72
vtkPythonInterpreter-8.2.dll (978428bb0869) - ## / 72
vtkRenderingAnnotation-8.2.dll (984570d6aa72) - ## / 72
vtkRenderingAnnotationPython38D-8.2.dll (73970d0d86c8) - ## / 71
vtkRenderingContext2D-8.2.dll (5900ad0b8b67) - ## / 62
vtkRenderingContext2DPython38D-8.2.dll (51f6eb759d92) - ## / 72
vtkRenderingContextOpenGL2-8.2.dll (4881a7d708c3) - ## / 72
vtkRenderingContextOpenGL2Python38D-8.2.dll (3b2543fd8f13) - ## / 72
vtkRenderingCore-8.2.dll (1480062a6de1) - ## / 72
vtkRenderingCorePython38D-8.2.dll (571b8afa918c) - ## / 72
vtkRenderingFreeType-8.2.dll (ac7e94927c4d) - ## / 72
vtkRenderingFreeTypePython38D-8.2.dll (0df644a47ad0) - ## / 72
vtkRenderingGL2PSOpenGL2-8.2.dll (fc09bef34af3) - ## / 72
vtkRenderingGL2PSOpenGL2Python38D-8.2.dll (b4aa40303e62) - ## / 72
vtkRenderingImage-8.2.dll (6f08ee904b86) - ## / 72
vtkRenderingImagePython38D-8.2.dll (29dbc337e2bf) - ## / 70
vtkRenderingLabel-8.2.dll (b143b6745b06) - ## / 72
vtkRenderingLabelPython38D-8.2.dll (fbc371deb594) - ## / 67
vtkRenderingLOD-8.2.dll (12c28fed8df8) - ## / 71
vtkRenderingLODPython38D-8.2.dll (f310e3f399bd) - ## / 71
vtkRenderingMatplotlib-8.2.dll (7dbe9e199537) - ## / 72
vtkRenderingMatplotlibPython38D-8.2.dll (2700b9e7876f) - ## / 72
vtkRenderingOpenGL2-8.2.dll (a36d9ad0f2fd) - ## / 72
vtkRenderingOpenGL2Python38D-8.2.dll (ded7587ce1f7) - ## / 72
vtkRenderingVolume-8.2.dll (309cdfbeeb9d) - ## / 72
vtkRenderingVolumeOpenGL2-8.2.dll (c1c2a9cc93da) - ## / 72
vtkRenderingVolumeOpenGL2Python38D-8.2.dll (db3f20b651e8) - ## / 72
vtkRenderingVolumePython38D-8.2.dll (9607d824c40f) - ## / 72
vtksqlite-8.2.dll (4916e2487c42) - ## / 71
vtksys-8.2.dll (636b7609d2cf) - ## / 72
vtktheora-8.2.dll (2417619311c4) - ## / 70
vtkverdict-8.2.dll (c65239872902) - ## / 72
vtkViewsContext2D-8.2.dll (27b490616d0a) - ## / 72
vtkViewsContext2DPython38D-8.2.dll (5cf4a4743d9c) - ## / 71
vtkViewsCore-8.2.dll (95553b81a48b) - ## / 72
vtkViewsCorePython38D-8.2.dll (38357e191236) - ## / 72
vtkViewsInfovis-8.2.dll (167789cb9928) - ## / 72
vtkViewsInfovisPython38D-8.2.dll (a2cb91d6d8ce) - ## / 71
vtkWrappingPython38Core-8.2.dll (35095202cae9) - ## / 72
vtkxdmf2-8.2.dll (2e066311f3b4) - ## / 72
yaml.dll (ffe442e9da6b) - ## / 68
liblzma.dll (f855286120d0) - ## / 70
libssh2.dll (d970c064334f) - ## / 70
TKBin.dll (18cda842bb6c) - ## / 72
TKBinL.dll (52ba6776b992) - ## / 71
TKBinTObj.dll (7358a25c9d7f) - ## / 68
TKBinXCAF.dll (e70f9ff66bef) - ## / 72
TKBO.dll (a8aacd6009c8) - ## / 70
TKBool.dll (7da46c099e3e) - ## / 70
TKBRep.dll (2fac8bf5e3b8) - ## / 70
TKCAF.dll (102c16c47665) - ## / 70
TKCDF.dll (adfa915c807a) - ## / 72
TKernel.dll (7a9417e0631a) - ## / 71
TKFeat.dll (efd96e5678ce) - ## / 66
TKFillet.dll (06064b3c3ced) - ## / 66
TKG2d.dll (6cb75cf6a3db) - ## / 69
TKG3d.dll (7b995f33e7e4) - ## / 70
TKGeomAlgo.dll (48369599898e) - ## / 70
TKGeomBase.dll (f572ff611069) - ## / 68
TKHLR.dll (c7edda4c5c2c) - ## / 70
TKIGES.dll (088c1c87356a) - ## / 71
TKIVtk.dll (b26ad25f7667) - ## / 68
TKLCAF.dll (da1bfde94054) - ## / 67
TKMath.dll (8cc7600d8c11) - ## / 69
TKMesh.dll (cf3983103476) - ## / 67
TKMeshVS.dll (7fcf5439185d) - ## / 65
TKOffset.dll (312d4b38d080) - ## / 69
TKOpenGl.dll (6b51fb5bafbe) - ## / 67
TKPrim.dll (d424c15c2481) - ## / 71
TKRWMesh.dll (2fcde154e46f) - ## / 71
TKService.dll (560ae9ed8964) - ## / 70
TKShHealing.dll (f2c1138f5cd2) - ## / 69
TKStd.dll (f8489e56d1f8) - ## / 71
TKStdL.dll (44e62f4ee83c) - ## / 72
TKSTEP.dll (7c50105b8a5c) - ## / 69
TKSTEP209.dll (a8d5c4973f5f) - ## / 68
TKSTEPAttr.dll (a1673883d45d) - ## / 69
TKSTEPBase.dll (5664c9ae4557) - ## / 67
TKSTL.dll (e2bc1fcd7339) - ## / 71
TKTObj.dll (fc4555327ce9) - ## / 71
TKTopAlgo.dll (ea757b1f4274) - ## / 69
TKV3d.dll (1aba21457579) - ## / 70
TKVCAF.dll (39fb772f725e) - ## / 70
TKVRML.dll (c79477c0eab4) - ## / 71
TKXCAF.dll (194c1fba23fc) - ## / 72
TKXDEIGES.dll (128ee2cc13fb) - ## / 68
TKXDESTEP.dll (1db25d39c115) - ## / 70
TKXMesh.dll (d194a9f73907) - ## / 70
TKXml.dll (d4d735f10d81) - ## / 69
TKXmlL.dll (1b62613aaa45) - ## / 70
TKXmlTObj.dll (85b0e7941926) - ## / 68
TKXmlXCAF.dll (010ffad422a4) - ## / 68
TKXSBase.dll (85fc2faa80c5) - ## / 72
charset.dll (f1ff420e6436) - ## / 69
expat.dll (9d56d4978281) - ## / 69
iconv.dll (cfade2521979) - ## / 66
liblz4.dll (4d4b6d376528) - ## / 68
Coin4.dll (54235c2b92e6) - ## / 65
libcurl.dll (0506ed54d95b) - ## / 70
SoQt1.dll (a8b3c52b14d0) - ## / 70
zlib.dll (12cb89f107e3) - ## / 69
libjpeg.dll (e81bca47934e) - ## / 67
libpng16.dll (f2a3ac7084b0) - ## / 66
comerr64.dll (0358e48d5045) - ## / 71
gssapi64.dll (04b254db20f1) - ## / 70
k5sprt64.dll (390c2620ba98) - ## / 71
kfwlogon.dll (47cefaf60b23) - ## / 71
krb5_64.dll (961a0355d5c7) - ## / 71
krbcc64.dll (3710a5889d26) - ## / 70
leashw64.dll (968894a50007) - ## / 66
libiomp5md.dll (b2b162299e70) - ## / 69
libiompstubs5md.dll (6e19d49ad968) - ## / 68
xpprof64.dll (8177049cf6f3) - ## / 69
libblas.dll (21f2fdeba006) - ## / 67
libimalloc.dll (268ff7016e35) - ## / 68
mkl_avx.dll (118c5e491174) - ## / 70
mkl_avx2.dll (84d8b5339722) - ## / 68
mkl_avx512.dll (eddfea88dd9b) - ## / 64
mkl_blacs_ilp64.dll (0d6cdd918260) - ## / 71
mkl_blacs_intelmpi_ilp64.dll (bd72295aab45) - ## / 71
mkl_blacs_intelmpi_lp64.dll (cfe51d00e7ad) - ## / 71
mkl_blacs_lp64.dll (13ce7871b8b1) - ## / 71
mkl_blacs_mpich2_ilp64.dll (a969a82669b8) - ## / 71
mkl_blacs_mpich2_lp64.dll (e26cea6d1ca9) - ## / 71
mkl_blacs_msmpi_ilp64.dll (c2189ea09208) - ## / 71
mkl_blacs_msmpi_lp64.dll (c942fa663de7) - ## / 70
mkl_cdft_core.dll (a16d3e5d969b) - ## / 71
mkl_core.dll (d890928a4d34) - ## / 67
mkl_def.dll (1391ff32900d) - ## / 71
mkl_intel_thread.dll (6cd4f7692c45) - ## / 69
mkl_mc.dll (fcf4cc2a63ef) - ## / 71
mkl_mc3.dll (39d65c61653b) - ## / 67
mkl_msg.dll (d2a8a81abbf4) - ## / 71
mkl_pgi_thread.dll (ccf22673c126) - ## / 69
mkl_scalapack_ilp64.dll (5070b8e826c9) - ## / 71
mkl_scalapack_lp64.dll (78d0a6e0093d) - ## / 71
mkl_sequential.dll (18caad66f4ff) - ## / 71
mkl_tbb_thread.dll (7150839a16ee) - ## / 71
mkl_vml_avx.dll (25308a531747) - ## / 71
mkl_vml_avx2.dll (a8cc808823e2) - ## / 71
mkl_vml_avx512.dll (520052725c2e) - ## / 71
mkl_vml_cmpt.dll (5d78a8b1d0bc) - ## / 71
mkl_vml_def.dll (49469c264a76) - ## / 70
mkl_vml_mc.dll (b26a8c8e6da9) - ## / 71
mkl_vml_mc2.dll (40d3a804f28a) - ## / 71
mkl_vml_mc3.dll (4821618d5295) - ## / 71
boost_atomic.dll (512c39d34d8c) - ## / 69
boost_chrono.dll (7c666d39a19b) - ## / 69
boost_container.dll (844ef55a02e3) - ## / 68
boost_context.dll (274e30e20eab) - ## / 70
boost_contract.dll (e48105cf9976) - ## / 68
boost_coroutine.dll (fb653fba372e) - ## / 69
boost_date_time.dll (8f089a67c188) - ## / 69
boost_fiber.dll (ef9671c05858) - ## / 68
boost_filesystem.dll (f5686f364eff) - ## / 70
boost_graph.dll (2ef30731f78e) - ## / 70
boost_iostreams.dll (cf3850142547) - ## / 69
boost_locale.dll (c0b5d4ead5cb) - ## / 69
boost_log.dll (62d04f79b310) - ## / 70
boost_log_setup.dll (cb7f5be51b52) - ## / 70
boost_math_c99.dll (158f935f24a4) - ## / 70
boost_math_c99f.dll (46c84a19b013) - ## / 70
boost_math_c99l.dll (2c09e85a9781) - ## / 69
boost_math_tr1.dll (29cd3ca2c280) - ## / 70
boost_math_tr1f.dll (822f615521fc) - ## / 70
boost_math_tr1l.dll (40119bda77c7) - ## / 70
boost_prg_exec_monitor.dll (a25dbedee7a0) - ## / 70
boost_program_options.dll (e924058171c9) - ## / 70
boost_random.dll (c46a64819da8) - ## / 69
boost_regex.dll (9d7fbfcd2603) - ## / 68
boost_serialization.dll (147ecb4d82f6) - ## / 68
boost_stacktrace_noop.dll (2e86c340a84c) - ## / 68
boost_stacktrace_windbg.dll (a313de26941e) - ## / 69
boost_stacktrace_windbg_cached.dll (bd8f1ac891e6) - ## / 70
boost_system.dll (b2402c5d2f6d) - ## / 69
boost_thread.dll (ceb391708b2f) - ## / 70
boost_timer.dll (52e70b3822e0) - ## / 70
boost_type_erasure.dll (d9fb1a55cd15) - ## / 70
boost_unit_test_framework.dll (228d41d7cfee) - ## / 69
boost_wave.dll (6cb3ec612889) - ## / 69
boost_wserialization.dll (b64cfe4e6519) - ## / 70
bzip2.dll (bf72f086e065) - ## / 69
hdf.dll (dda533e32cbb) - ## / 69
mfhdf.dll (7bae7693f274) - ## / 70
pcl_common.dll (dd16b494d6c7) - ## / 70
pcl_features.dll (79d80d8a7e97) - ## / 70
pcl_filters.dll (b6c4de24157e) - ## / 69
pcl_io.dll (f838fad88794) - ## / 69
pcl_io_ply.dll (fe7865851eda) - ## / 69
pcl_kdtree.dll (1d587b62ec96) - ## / 70
pcl_keypoints.dll (881d84a4b64a) - ## / 69
pcl_ml.dll (5c51ef8ba45e) - ## / 69
pcl_octree.dll (4873753cd322) - ## / 70
pcl_recognition.dll (e6f51739fe22) - ## / 70
pcl_registration.dll (61b73cd416ac) - ## / 69
pcl_sample_consensus.dll (4d92a23e3e06) - ## / 68
pcl_search.dll (e7781953c13f) - ## / 69
pcl_segmentation.dll (5cd32a1be39e) - ## / 70
pcl_stereo.dll (53e7754c2eb5) - ## / 70
pcl_surface.dll (01fcf5420140) - ## / 70
pcl_tracking.dll (889959384e15) - ## / 69
sqlite3.dll (ba439a436240) - ## / 68
xdr.dll (57f362817c12) - ## / 69
libcrypto-1_1-x64.dll (c13422b5b6e7) - ## / 69
libssl-1_1-x64.dll (712e333f6525) - ## / 68
libexslt.dll (f8d2c50781fb) - ## / 65
libtiff.dll (71ab0e5d5945) - ## / 66
libtiffxx.dll (cf14322cf2dd) - ## / 66
libxml2.dll (b1685a0c1fdc) - ## / 65
libxslt.dll (74c7777af24d) - ## / 65
netcdf.dll (3dfc9b649536) - ## / 69
concrt140.dll (0e9bfecceef8) - ## / 69
icudt.dll (08ca013d9537) - ## / 68
icudt68.dll (51720c61f5f7) - ## / 67
icuin.dll (5d172fedd38a) - ## / 69
icuio.dll (781925cfdc32) - ## / 70
icutest.dll (ca1267c1da4c) - ## / 70
icutu.dll (f6113292ec9e) - ## / 69
icuuc.dll (8a73eaafda49) - ## / 70
msvcp140.dll (ef27a68bdc1e) - ## / 68
msvcp140_1.dll (1f9fd98375af) - ## / 69
msvcp140_2.dll (cb9e67bc8c8f) - ## / 69
msvcp140_atomic_wait.dll (c3f92918d109) - ## / 69
msvcp140_codecvt_ids.dll (1be67e39f1a9) - ## / 69
python.exe (02c7b358d44a) - ## / 71
python3.dll (09e809907f11) - ## / 70
python38.dll (c7382fcc9f63) - ## / 70
pythonw.exe (da7177fede3b) - ## / 71
ucrtbase.dll (3caaf2f00adf) - ## / 69
vcamp140.dll (b97b312aca47) - ## / 69
vccorlib140.dll (fa99d5c87dd0) - ## / 70
vcomp140.dll (dbdf865a31ea) - ## / 68
vcruntime140_cor3.dll (97113d1b0bdf) - ## / 69
vcruntime140_1.dll (b4289a206c12) - ## / 68
freecad.0.19.0.23721-dev.nupkg (08b2bdaf9dc3) - ## / 61
FreeCAD_0.19.23721-Win-Conda_vc14.x-x86_64.7z (e7f36f583e03) - ## / 30
area-native.dll (9bd268884941) - ## / 67
assimpsceneimport.dll (e242c4fa44b7) - ## / 69
defaultgeometryloader.dll (13440ecf438b) - ## / 62
dsengine.dll (a8ae84bc502f) - ## / 66
freecad.exe (abb74c5bbeac) - ## / 64
FreeCADApp.dll (479892053163) - ## / 65
FreeCADBase.dll (88e23d811f8e) - ## / 69
freecadcmd.exe (7e964c962848) - ## / 70
FreeCADGui.dll (151f298a84e4) - ## / 66
freetype.dll (4118af61a5d1) - ## / 65
gltfgeometryloader.dll (dcc52999fc84) - ## / 67
gltfsceneexport.dll (8948ed89a8ea) - ## / 67
gltfsceneimport.dll (98d2a5ccb476) - ## / 51
hdf5.dll (d69bab4e9c9a) - ## / 66
hdf5_cpp.dll (1eb35aa2dbd5) - ## / 65
hdf5_hl.dll (d1984fb78656) - ## / 66
hdf5_hl_cpp.dll (0689c614dcc7) - ## / 65
hdf5_tools.dll (9f4a16b6727e) - ## / 63
libclang.dll (04a9e57cb2ec) - ## / 64
libEGL.dll (d389df48bf5a) - ## / 44
libGLESv2.dll (50f20181247a) - ## / 68
libzstd.dll (d36ca44c5004) - ## / 70
pyqt5.dll (741f26be71ca) - ## / 68
pyqt5qmlplugin.dll (d65d8c17299e) - ## / 68
pyside2.cp38-win_amd64.dll (4822d35fbe24) - ## / 70
qaxwidget.dll (a36cbefe6fe9) - ## / 65
qdirect2d.dll (ed9809caf15e) - ## / 60
qgenericbearer.dll (4c774b8b065f) - ## / 58
qgif.dll (3e60ea156c75) - ## / 69
qhull_r.dll (71317adb9c00) - ## / 68
qicns.dll (18fa299bae6f) - ## / 68
qico.dll (718f90665f67) - ## / 67
qjpeg.dll (e884983bed8b) - ## / 69
qminimal.dll (fc95a84ceb12) - ## / 66
qmldbg_debugger.dll (64b5f1d2522c) - ## / 63
qmldbg_inspector.dll (16fa6f79f45e) - ## / 67
qmldbg_local.dll (ddc7da63c923) - ## / 69
qmldbg_messages.dll (8c63eea1b3c5) - ## / 55
qmldbg_native.dll (e734ec673302) - ## / 66
qmldbg_nativedebugger.dll (99155618317d) - ## / 66
qmldbg_preview.dll (6231af915679) - ## / 67
qmldbg_profiler.dll (d49213a902fd) - ## / 69
qmldbg_quickprofiler.dll (5f7476b6c0af) - ## / 57
qmldbg_server.dll (bbd1cd8ac26d) - ## / 68
qmldbg_tcp.dll (aecb32bd888b) - ## / 56
qoffscreen.dll (2b5afb89d4a1) - ## / 48
qquickwidget.dll (abdb8c07119c) - ## / 64
qsgd3d12backend.dll (dbc288c23f55) - ## / 65
qsqlite.dll (7dec2b552a4e) - ## / 57
qsqlodbc.dll (82dd3f431a49) - ## / 56
qsvg.dll (14eaa89b6b72) - ## / 69
qsvgicon.dll (344e02fa865e) - ## / 69
Qt53DAnimation_conda.dll (d87bc4b59f8e) - ## / 67
Qt53DCore_conda.dll (cad696d14708) - ## / 68
Qt53DExtras_conda.dll (14e44f5e469a) - ## / 62
Qt53DInput_conda.dll (a125143ca66d) - ## / 64
Qt53DLogic_conda.dll (3cd87e056d31) - ## / 69
Qt53DQuickAnimation_conda.dll (3ca64ce2e2f2) - ## / 69
Qt53DQuickExtras_conda.dll (d06cd0435644) - ## / 68
Qt53DQuickInput_conda.dll (cf4fe2d08249) - ## / 58
Qt53DQuickRender_conda.dll (4f9aec3e6bc8) - ## / 68
Qt53DQuickScene2D_conda.dll (4d3190d5b474) - ## / 68
Qt53DQuick_conda.dll (8ca333477eaf) - ## / 69
Qt53DRender_conda.dll (6fc9525554d5) - ## / 69
Qt5Bluetooth_conda.dll (925683dac788) - ## / 66
Qt5Charts_conda.dll (59d9fac0c166) - ## / 61
Qt5Concurrent_conda.dll (034b25ef2d47) - ## / 67
Qt5Core_conda.dll (446c68810a5e) - ## / 68
Qt5DataVisualization_conda.dll (cfd0f5dd1350) - ## / 66
Qt5DBus_conda.dll (ae25170d6d75) - ## / 59
Qt5DesignerComponents_conda.dll (d7d95d764c2b) - ## / 69
Qt5Designer_conda.dll (4b2359a4b0ed) - ## / 55
Qt5Gamepad_conda.dll (db0f4f618a26) - ## / 61
Qt5Gui_conda.dll (3a3f112a6b2f) - ## / 65
Qt5Help_conda.dll (7cc67db4eb57) - ## / 62
Qt5Location_conda.dll (177a1c72a309) - ## / 69
Qt5MultimediaQuick_conda.dll (01af1922aac4) - ## / 68
Qt5MultimediaWidgets_conda.dll (e8246f081d0e) - ## / 69
Qt5Multimedia_conda.dll (74628e3aff69) - ## / 69
Qt5NetworkAuth_conda.dll (5d263675272b) - ## / 68
Qt5Network_conda.dll (0ca3a58ce293) - ## / 60
Qt5Nfc_conda.dll (8471b3210b76) - ## / 68
Qt5OpenGL_conda.dll (6a67de215113) - ## / 68
Qt5PositioningQuick_conda.dll (be01d4f6c6cd) - ## / 68
Qt5Positioning_conda.dll (607e82f7c33b) - ## / 69
Qt5PrintSupport_conda.dll (c8c41ae396be) - ## / 69
Qt5Purchasing_conda.dll (e51f93132f0c) - ## / 56
Qt5Qml_conda.dll (7887e077c7e7) - ## / 66
Qt5QuickControls2_conda.dll (d22c4cd51275) - ## / 66
Qt5QuickParticles_conda.dll (41efd9b66082) - ## / 69
Qt5QuickShapes_conda.dll (68e9a730701d) - ## / 67
Qt5QuickTemplates2_conda.dll (25406bc7734a) - ## / 69
Qt5QuickTest_conda.dll (97519d4f88ac) - ## / 55
Qt5QuickWidgets_conda.dll (7ad842fd9308) - ## / 55
Qt5Quick_conda.dll (cc335f268377) - ## / 68
Qt5RemoteObjects_conda.dll (f2d563352604) - ## / 68
Qt5ScriptTools_conda.dll (c2d6b877cd00) - ## / 68
Qt5Script_conda.dll (d05599890465) - ## / 69
Qt5Scxml_conda.dll (f378ef18f660) - ## / 69
Qt5Sensors_conda.dll (7cca493eda0d) - ## / 68
Qt5SerialBus_conda.dll (b2b2a29060c4) - ## / 69
Qt5SerialPort_conda.dll (268eebd5cf47) - ## / 68
Qt5Sql_conda.dll (08e6bc72c3c0) - ## / 69
Qt5Svg_conda.dll (257effd031f1) - ## / 69
Qt5Test_conda.dll (e3e23516cbbc) - ## / 69
Qt5TextToSpeech_conda.dll (7c8b466b7e85) - ## / 68
Qt5VirtualKeyboard_conda.dll (d9dcd481e982) - ## / 69
Qt5WebChannel_conda.dll (9d87b8cae414) - ## / 68
Qt5WebEngineCore_conda.dll (a0f7a5bb5932) - ## / 61
Qt5WebEngineWidgets_conda.dll (97fcdb413e84) - ## / 67
Qt5WebEngine_conda.dll (bfca94f042ef) - ## / 64
Qt5WebSockets_conda.dll (3e8e7a19d464) - ## / 68
Qt5WebView_conda.dll (cbfb9d020461) - ## / 69
Qt5Widgets_conda.dll (90a04ed397f9) - ## / 61
Qt5WinExtras_conda.dll (79a9bd077d21) - ## / 69
Qt5XmlPatterns_conda.dll (ebd667945016) - ## / 69
Qt5Xml_conda.dll (dd3421c28a51) - ## / 67
qtaudio_wasapi.dll (476a3a401884) - ## / 68
qtaudio_windows.dll (706e88ed0ee1) - ## / 68
qtexttospeech_sapi.dll (b7010b2b2bd6) - ## / 69
qtga.dll (e796ebd24b74) - ## / 69
qtgeoservices_esri.dll (4b60a7825f55) - ## / 67
qtgeoservices_itemsoverlay.dll (8a2fc7b351ba) - ## / 62
qtgeoservices_mapbox.dll (e12405b5574f) - ## / 69
qtgeoservices_nokia.dll (507df8fe92ac) - ## / 69
qtgeoservices_osm.dll (59d924bdcdcf) - ## / 67
qtiff.dll (9c7cb7a55528) - ## / 67
qtmedia_audioengine.dll (7f855353503f) - ## / 69
qtmultimedia_m3u.dll (9c69af2bc90d) - ## / 69
qtpassthrucanbus.dll (d59091fa4499) - ## / 65
qtpeakcanbus.dll (daf2077d77b5) - ## / 69
qtposition_positionpoll.dll (a96b54af4432) - ## / 69
qtposition_serialnmea.dll (5d7b006fd422) - ## / 69
qtposition_winrt.dll (2220ee05c024) - ## / 69
qtsensorgestures_plugin.dll (88e73abbc9f9) - ## / 69
qtsensorgestures_shakeplugin.dll (fc1b27b02f94) - ## / 69
qtsensors_generic.dll (ccadfebaa897) - ## / 68
qtsysteccanbus.dll (79417bcb6157) - ## / 69
qttinycanbus.dll (3c0725c8c9f6) - ## / 68
qtuiotouchplugin.dll (b20ce87f48dc) - ## / 68
qtvectorcanbus.dll (eb00556cb9f3) - ## / 69
qtvirtualcanbus.dll (f23fcaf2b20a) - ## / 68
qtvirtualkeyboardplugin.dll (a0e859e742b9) - ## / 68
qtvirtualkeyboard_hangul.dll (210c8c20c450) - ## / 67
qtvirtualkeyboard_openwnn.dll (fcc392e9feb8) - ## / 68
qtvirtualkeyboard_pinyin.dll (a7efd079b8f2) - ## / 67
qtvirtualkeyboard_tcime.dll (db286af80d92) - ## / 67
qtvirtualkeyboard_thai.dll (e1b25a34e643) - ## / 67
QtWebEngineProcess.exe (4d4684df5549) - ## / 70
qtwebview_webengine.dll (89f6e1bf6562) - ## / 67
qwbmp.dll (15a5b85c61e4) - ## / 68
qwebengineview.dll (8cf621684008) - ## / 69
qwebgl.dll (af2a6e34e9e9) - ## / 67
qwebp.dll (b80bf9397c8b) - ## / 49
qwindows.dll (44c9a30564d0) - ## / 68
qwindowsvistastyle.dll (0db750050ac5) - ## / 67
qxdgdesktopportal.dll (a028dba2b2dc) - ## / 69
scene2d.dll (1d2e1902a174) - ## / 67
shiboken2.cp38-win_amd64.dll (34da8ecf71b1) - ## / 70
tbb.dll (94db896bd264) - ## / 69
tbbmalloc.dll (ca399d8e7cc6) - ## / 68
tbbmalloc_proxy.dll (de0439461887) - ## / 69
windowsprintersupport.dll (cbd09e7dfcfc) - ## / 69
wmfengine.dll (2ec4b59279d3) - ## / 69
xerces-c_3_2.dll (09e4472c6ef3) - ## / 69
xinputgamepad.dll (7f851dae3766) - ## / 68

In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).

Chocolatey Pro provides runtime protection from possible malware.

Version History

Version	Downloads	Last Updated	Status
FreeCAD 38314.2024.7.22-dev	28	Tuesday, July 23, 2024	Approved
FreeCAD 38261.2024.7.19-dev	24	Saturday, July 20, 2024	Approved
FreeCAD 38231.2024.7.15-dev	27	Tuesday, July 16, 2024	Approved
FreeCAD 38127.2024.7.12-dev	18	Saturday, July 13, 2024	Approved
FreeCAD 38079.2024.7.9-dev	34	Tuesday, July 9, 2024	Approved
FreeCAD 38043.2024.7.6-dev	22	Saturday, July 6, 2024	Approved
FreeCAD 38001.2024.7.5-dev	15	Saturday, July 6, 2024	Approved
FreeCAD 38001.2024.7.2-dev	26	Tuesday, July 2, 2024	Approved
FreeCAD 37928.2024.6.28-dev	23	Saturday, June 29, 2024	Approved
FreeCAD 37898.2024.6.25-dev	29	Tuesday, June 25, 2024	Approved
FreeCAD 37841.2024.6.24-dev	21	Tuesday, June 25, 2024	Approved
FreeCAD 37841.2024.6.21-dev	24	Saturday, June 22, 2024	Approved
FreeCAD 37730.2024.6.18-dev	39	Tuesday, June 18, 2024	Approved
FreeCAD 37730.2024.6.14-dev	29	Saturday, June 15, 2024	Approved
FreeCAD 37709.2024.6.11-dev	18	Friday, June 14, 2024	Approved
FreeCAD 33658.2023.7.31-dev	2382	Monday, July 31, 2023	Exempted
FreeCAD 33658.2023.7.30-dev	47	Sunday, July 30, 2023	Exempted
FreeCAD 33656.2023.7.27-dev	62	Thursday, July 27, 2023	Exempted
FreeCAD 33636.2023.7.24-dev	102	Monday, July 24, 2023	Exempted
FreeCAD 33631.2023.7.23-dev	43	Sunday, July 23, 2023	Exempted
FreeCAD 33617.2023.7.21-dev	73	Friday, July 21, 2023	Exempted
FreeCAD 33617.2023.7.20-dev	47	Thursday, July 20, 2023	Exempted
FreeCAD 33593.2023.7.16-dev	89	Sunday, July 16, 2023	Approved
FreeCAD 33576.2023.7.13-dev	60	Thursday, July 13, 2023	Exempted
FreeCAD 33515.2023.7.9-dev	108	Sunday, July 9, 2023	Exempted
FreeCAD 33492.2023.7.8-dev	46	Saturday, July 8, 2023	Exempted
FreeCAD 33492.2023.7.7-dev	39	Saturday, July 8, 2023	Exempted
FreeCAD 33492.2023.7.6-dev	53	Friday, July 7, 2023	Exempted
FreeCAD 33485.2023.7.5-dev	56	Wednesday, July 5, 2023	Exempted
FreeCAD 33458.2023.7.2-dev	55	Sunday, July 2, 2023	Exempted
FreeCAD 33458.2023.6.30-dev	68	Friday, June 30, 2023	Exempted
FreeCAD 33345.2023.6.29-dev	44	Thursday, June 29, 2023	Exempted
FreeCAD 33345.2023.6.25-dev	76	Sunday, June 25, 2023	Approved
FreeCAD 33345.2023.6.22-dev	52	Thursday, June 22, 2023	Approved
FreeCAD 33345.2023.6.18-dev	71	Sunday, June 18, 2023	Approved
FreeCAD 33345.2023.6.15-dev	69	Thursday, June 15, 2023	Approved
FreeCAD 33345.2023.6.11-dev	62	Sunday, June 11, 2023	Approved
FreeCAD 33345.2023.6.8-dev	62	Thursday, June 8, 2023	Approved
FreeCAD 33345.2023.6.4-dev	73	Sunday, June 4, 2023	Approved
FreeCAD 33345.2023.6.1-dev	48	Thursday, June 1, 2023	Approved
FreeCAD 33321.2023.5.28-dev	66	Sunday, May 28, 2023	Approved
FreeCAD 33303.2023.5.25-dev	76	Thursday, May 25, 2023	Approved
FreeCAD 33263.2023.5.21-dev	101	Sunday, May 21, 2023	Approved
FreeCAD 33236.2023.5.18-dev	65	Thursday, May 18, 2023	Approved
FreeCAD 33175.2023.5.14-dev	64	Sunday, May 14, 2023	Approved
FreeCAD 33110.2023.5.11-dev	66	Thursday, May 11, 2023	Exempted
FreeCAD 33110.2023.5.7-dev	84	Sunday, May 7, 2023	Approved
FreeCAD 32985.2023.5.4-dev	64	Thursday, May 4, 2023	Approved
FreeCAD 32985.2023.4.30-dev	83	Sunday, April 30, 2023	Approved
FreeCAD 32985.2023.4.29-dev	55	Saturday, April 29, 2023	Approved
FreeCAD 32985.2023.4.27-dev	53	Thursday, April 27, 2023	Approved
FreeCAD 32985.2023.4.23-dev	75	Sunday, April 23, 2023	Approved
FreeCAD 32929.2023.4.20-dev	69	Thursday, April 20, 2023	Approved
FreeCAD 32867.2023.4.16-dev	80	Sunday, April 16, 2023	Approved
FreeCAD 32821.2023.4.13-dev	70	Thursday, April 13, 2023	Approved
FreeCAD 32785.2023.4.12-dev	51	Wednesday, April 12, 2023	Approved
FreeCAD 32785.2023.4.9-dev	64	Sunday, April 9, 2023	Approved
FreeCAD 32755.2023.4.6-dev	69	Thursday, April 6, 2023	Approved
FreeCAD 32662.2023.4.2-dev	94	Sunday, April 2, 2023	Approved
FreeCAD 32637.2023.3.30-dev	75	Thursday, March 30, 2023	Approved
FreeCAD 32532.2023.3.29-dev	66	Thursday, March 30, 2023	Approved
FreeCAD 32457.2023.3.23-dev	158	Thursday, March 23, 2023	Approved
FreeCAD 31917.2023.3.19-dev	81	Sunday, March 19, 2023	Approved
FreeCAD 31917.2023.3.16-dev	67	Thursday, March 16, 2023	Approved
FreeCAD 31917.2023.3.12-dev	80	Sunday, March 12, 2023	Approved
FreeCAD 31917.2023.3.9-dev	78	Thursday, March 9, 2023	Approved
FreeCAD 31917.2023.3.5-dev	164	Sunday, March 5, 2023	Approved
FreeCAD 31917.2023.3.2-dev	60	Thursday, March 2, 2023	Approved
FreeCAD 31917.2023.2.26-dev	85	Sunday, February 26, 2023	Approved
FreeCAD 31917.2023.2.23-dev	61	Thursday, February 23, 2023	Approved
FreeCAD 31917.2023.2.19-dev	68	Sunday, February 19, 2023	Approved
FreeCAD 31917.2023.2.16-dev	72	Thursday, February 16, 2023	Approved
FreeCAD 31850.2023.2.12-dev	77	Sunday, February 12, 2023	Approved
FreeCAD 31812.2023.2.9-dev	70	Thursday, February 9, 2023	Approved
FreeCAD 31772.2023.2.5-dev	78	Sunday, February 5, 2023	Approved
FreeCAD 31739.2023.2.2-dev	74	Thursday, February 2, 2023	Exempted
FreeCAD 31709.2023.1.29-dev	62	Sunday, January 29, 2023	Approved
FreeCAD 31695.2023.1.26-dev	67	Friday, January 27, 2023	Approved
FreeCAD 31641.2023.1.22-dev	64	Sunday, January 22, 2023	Approved
FreeCAD 31625.2023.1.19-dev	70	Thursday, January 19, 2023	Approved
FreeCAD 31513.2023.1.8-dev	108	Sunday, January 8, 2023	Approved
FreeCAD 31513.2023.1.5-dev	55	Sunday, January 8, 2023	Approved
FreeCAD 31340.2022.12.18-dev	203	Sunday, December 18, 2022	Approved
FreeCAD 31155.2022.12.15-dev	74	Thursday, December 15, 2022	Approved
FreeCAD 31155.2022.12.11-dev	79	Sunday, December 11, 2022	Approved
FreeCAD 31155.2022.12.8-dev	94	Thursday, December 8, 2022	Approved
FreeCAD 31155.2022.12.4-dev	76	Sunday, December 4, 2022	Approved
FreeCAD 31155.2022.12.1-dev	62	Thursday, December 1, 2022	Approved
FreeCAD 31109.2022.11.27-dev	91	Sunday, November 27, 2022	Approved
FreeCAD 31097.2022.11.26-dev	65	Saturday, November 26, 2022	Approved
FreeCAD 31097.2022.11.24-dev	68	Thursday, November 24, 2022	Approved
FreeCAD 31058.2022.11.20-dev	82	Monday, November 21, 2022	Approved
FreeCAD 31035.2022.11.19-dev	58	Sunday, November 20, 2022	Approved
FreeCAD 31035.2022.11.17-dev	89	Thursday, November 17, 2022	Exempted
FreeCAD 30922.2022.11.13-dev	85	Sunday, November 13, 2022	Approved
FreeCAD 30922.2022.11.10-dev	84	Thursday, November 10, 2022	Approved
FreeCAD 30858.2022.11.7-dev	88	Monday, November 7, 2022	Approved
FreeCAD 30858.2022.11.6-dev	83	Sunday, November 6, 2022	Approved
FreeCAD 30716.2022.11.5-dev	62	Saturday, November 5, 2022	Approved
FreeCAD 30716.2022.11.3-dev	76	Thursday, November 3, 2022	Approved
FreeCAD 30716.2022.10.30-dev	91	Sunday, October 30, 2022	Approved
FreeCAD 30716.2022.10.27-dev	79	Thursday, October 27, 2022	Approved
FreeCAD 30716.2022.10.23-dev	87	Tuesday, October 25, 2022	Approved
FreeCAD 30398.2022.9.18-dev	381	Sunday, September 18, 2022	Approved
FreeCAD 30377.2022.9.15-dev	101	Friday, September 16, 2022	Exempted
FreeCAD 30345.2022.9.15-dev	65	Thursday, September 15, 2022	Approved
FreeCAD 30345.2022.9.11-dev	98	Sunday, September 11, 2022	Exempted
FreeCAD 30305.2022.9.8-dev	94	Thursday, September 8, 2022	Approved
FreeCAD 30265.2022.9.5-dev	106	Monday, September 5, 2022	Approved
FreeCAD 30256.2022.9.4-dev	63	Sunday, September 4, 2022	Approved
FreeCAD 0.21.2.1	4389	Friday, June 14, 2024	Approved
FreeCAD 0.20.2.1	20185	Sunday, January 8, 2023	Approved
FreeCAD 0.20.1.1	4829	Tuesday, October 25, 2022	Approved
FreeCAD 0.20.0.27428-dev	840	Sunday, February 6, 2022	Exempted
FreeCAD 0.20.0.26858-dev	380	Tuesday, January 4, 2022	Exempted
FreeCAD 0.20.0.26845-dev	99	Sunday, January 2, 2022	Exempted
FreeCAD 0.20.0.26155-dev	512	Sunday, October 17, 2021	Exempted
FreeCAD 0.20.0.25645-dev	322	Saturday, September 4, 2021	Exempted
FreeCAD 0.20.0.25541-dev	204	Friday, August 20, 2021	Exempted
FreeCAD 0.20.0.25452-dev	185	Friday, August 13, 2021	Exempted
FreeCAD 0.20.0.25391-dev	202	Monday, August 2, 2021	Exempted
FreeCAD 0.20.0.25306-dev	204	Friday, July 23, 2021	Approved
FreeCAD 0.20.0.25065-dev	308	Monday, June 14, 2021	Exempted
FreeCAD 0.20.0.24986-dev	191	Monday, May 31, 2021	Exempted
FreeCAD 0.20.0.24893-dev	121	Friday, May 28, 2021	Exempted
FreeCAD 0.20.0.1	5306	Sunday, September 4, 2022	Approved
FreeCAD 0.19.4.2	24248	Tuesday, April 12, 2022	Exempted
FreeCAD 0.19.4	2777	Wednesday, March 9, 2022	Approved
FreeCAD 0.19.3	4406	Monday, December 13, 2021	Approved
FreeCAD 0.19.2.7	51741	Thursday, April 22, 2021	Approved
FreeCAD 0.19.1	15758	Saturday, March 20, 2021	Approved
FreeCAD 0.19.0.24291-dev	90	Wednesday, April 28, 2021	Exempted
FreeCAD 0.19.0.24276-dev	250	Friday, March 19, 2021	Exempted
FreeCAD 0.19.0.24267-dev	930	Saturday, February 27, 2021	Approved
FreeCAD 0.19.0.24212-dev	530	Sunday, February 21, 2021	Approved
FreeCAD 0.19.0.24054-dev	405	Monday, February 15, 2021	Approved
FreeCAD 0.19.0.24012-dev	316	Friday, February 12, 2021	Approved
FreeCAD 0.19.0.23756-dev	905	Sunday, January 24, 2021	Approved
FreeCAD 0.19.0.23721-dev	254	Friday, January 22, 2021	Approved
FreeCAD 0.19.0.23578-dev	698	Sunday, January 3, 2021	Exempted
FreeCAD 0.19.0.23546-dev	392	Monday, December 28, 2020	Approved
FreeCAD 0.19.0.23463-dev	376	Monday, December 21, 2020	Approved
FreeCAD 0.19.0.23323-dev	373	Monday, December 14, 2020	Approved
FreeCAD 0.19.0.23258-dev	260	Tuesday, December 8, 2020	Approved
FreeCAD 0.19.0.23141-dev	456	Sunday, November 29, 2020	Approved
FreeCAD 0.19.0.23074-dev	299	Monday, November 23, 2020	Exempted
FreeCAD 0.19.0.23058-dev	204	Friday, November 20, 2020	Approved
FreeCAD 0.19.0.23040-dev	175	Wednesday, November 18, 2020	Exempted
FreeCAD 0.19.0.22960-dev	505	Monday, November 9, 2020	Exempted
FreeCAD 0.19.0.22894-dev	171	Thursday, November 5, 2020	Exempted
FreeCAD 0.19.0.22846-dev	357	Monday, October 26, 2020	Exempted
FreeCAD 0.19.0.22756-dev	254	Sunday, October 18, 2020	Approved
FreeCAD 0.19.0.22670-dev	225	Sunday, October 11, 2020	Exempted
FreeCAD 0.19.0.22665-dev	163	Friday, October 9, 2020	Exempted
FreeCAD 0.19.0.22522-dev	219	Sunday, September 27, 2020	Approved
FreeCAD 0.19.0.22492-dev	194	Wednesday, September 23, 2020	Approved
FreeCAD 0.19.0.22474-dev	198	Sunday, September 20, 2020	Approved
FreeCAD 0.19.0.22411-dev	192	Sunday, September 13, 2020	Exempted
FreeCAD 0.19.0.22366-dev	148	Thursday, September 10, 2020	Exempted
FreeCAD 0.19.0.22284-dev	176	Monday, August 24, 2020	Exempted
FreeCAD 0.19.0.22266-dev	156	Wednesday, August 19, 2020	Approved
FreeCAD 0.19.0.22234-dev	139	Saturday, August 15, 2020	Approved
FreeCAD 0.19.0.22198-dev	157	Sunday, August 9, 2020	Approved
FreeCAD 0.19.0.22164-dev	183	Friday, July 31, 2020	Approved
FreeCAD 0.19.0.22130-dev	158	Tuesday, July 28, 2020	Approved
FreeCAD 0.19.0.22039-dev	162	Monday, July 20, 2020	Approved
FreeCAD 0.19.0.21940-dev	166	Monday, July 13, 2020	Approved
FreeCAD 0.19.0.21857-dev	160	Wednesday, July 8, 2020	Approved
FreeCAD 0.19.0.21775-dev	154	Saturday, June 27, 2020	Approved
FreeCAD 0.19.0.21764-dev	166	Friday, June 26, 2020	Exempted
FreeCAD 0.19.0.21718-dev	158	Monday, June 22, 2020	Approved
FreeCAD 0.19.0.21654-dev	116	Saturday, June 20, 2020	Approved
FreeCAD 0.19.0.21622-dev	145	Monday, June 15, 2020	Exempted
FreeCAD 0.19.0.21514-dev	159	Monday, June 8, 2020	Approved
FreeCAD 0.19.0.21329-dev	184	Sunday, May 31, 2020	Approved
FreeCAD 0.19.0.21280-dev	173	Wednesday, May 27, 2020	Exempted
FreeCAD 0.19.0.21125-dev	186	Wednesday, May 20, 2020	Exempted
FreeCAD 0.19.0.21097-dev	159	Tuesday, May 19, 2020	Exempted
FreeCAD 0.19.0.21049-dev	176	Thursday, May 14, 2020	Approved
FreeCAD 0.19.0.20943-dev	220	Wednesday, May 6, 2020	Approved
FreeCAD 0.19.0.20900-dev	186	Sunday, May 3, 2020	Approved
FreeCAD 0.19.0.20802-dev	155	Sunday, April 26, 2020	Approved
FreeCAD 0.19.0.20655-dev	209	Wednesday, April 22, 2020	Approved
FreeCAD 0.19.0.20639-dev	194	Tuesday, April 21, 2020	Approved
FreeCAD 0.19.0.20514-dev	173	Monday, April 13, 2020	Approved
FreeCAD 0.19.0.20415-dev	190	Tuesday, April 7, 2020	Exempted
FreeCAD 0.19.0.20310-dev	240	Sunday, March 29, 2020	Exempted
FreeCAD 0.19.0.20209-dev	165	Wednesday, March 25, 2020	Exempted
FreeCAD 0.19.0.20052-dev	186	Sunday, March 15, 2020	Approved
FreeCAD 0.18.16146	10364	Tuesday, November 5, 2019	Approved
FreeCAD 0.18.16131	2184	Wednesday, July 24, 2019	Approved
FreeCAD 0.18.16110	1639	Wednesday, April 24, 2019	Approved
FreeCAD 0.18.4.980	197	Sunday, March 15, 2020	Approved
FreeCAD 0.17.13541	2241	Saturday, October 13, 2018	Approved
FreeCAD 0.17.13528	1648	Saturday, July 28, 2018	Approved
FreeCAD 0.17.13522.20180515	1049	Tuesday, May 15, 2018	Approved
FreeCAD 0.17.13522	803	Friday, May 11, 2018	Approved
FreeCAD 0.17.13519	667	Wednesday, April 25, 2018	Approved
FreeCAD 0.17	891	Monday, April 9, 2018	Approved
FreeCAD 0.16.6712	3547	Saturday, October 21, 2017	Approved
FreeCAD 0.16.0.20161107	1441	Monday, November 7, 2016	Approved
FreeCAD 0.16	2095	Thursday, May 12, 2016	Approved
FreeCAD 0.15.4671	1187	Tuesday, June 2, 2015	Approved
FreeCAD 0.14.3700	809	Tuesday, July 15, 2014	Unknown
FreeCAD 0.14.3692	537	Sunday, July 6, 2014	Unknown
FreeCAD 0.13.1828	696	Friday, April 26, 2013	Unknown

Release Notes

https://www.freecadweb.org/wiki/Release_notes_0.19

Dependencies

- chocolatey-core.extension (≥ 1.3.3)

Discussion for the FreeCAD Package

Ground Rules:

This discussion is only about FreeCAD and the FreeCAD package. If you have feedback for Chocolatey, please contact the Google Group.
This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
Tell us what you love about the package or FreeCAD, or tell us what needs improvement.
Share your experiences with the package, or extra configuration or gotchas that you've found.
If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.

Resources

Events

Courses

194,029

254

22 Jan 2021

FreeCAD

FreeCAD 0.19.0.23721-dev

Some Checks Have Failed or Are Not Yet Complete

Deployment Method: Individual Install, Upgrade, & Uninstall

Deployment Method:

1. Enter Your Internal Repository Url

2. Setup Your Environment

1. Ensure you are set for organizational deployment

2. Get the package into your environment

3. Copy Your Script

4. If applicable - Chocolatey configuration/installation

Features

Package parameters

Used only for Portable or Pre Releases Currently

Ground Rules: