Step 1: Review Your Packages

Step 2: Choose Your Integration Method

Step 3: Copy Your Script or Download Config

Option 1: Copy Script

Option 2: Download Config

Step 4: Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the packages and push them to a repository
  Download Packages

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the packages:
  Download Packages
- Follow manual internalization instructions
Package Internalizer (C4B)
- Run: (additional options)
- For package and dependencies run:
- Automate package internalization

Step 5: Copy Your Script

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###

#### We initialize a few things that are needed by this script - there are no other requirements.
$ErrorActionPreference = "Stop"

#### Set TLS 1.2 (3072) as that is the minimum required by various up-to-date repositories.
#### Use integers because the enumeration value for TLS 1.2 won't exist
#### in .NET 4.0, even though they are addressable if .NET 4.5+ is
#### installed (.NET 4.5 is an in-place upgrade).
[System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072

#### We use this variable for future REST calls.
$RequestArguments = @{
    UseBasicParsing = $true
}

## 2. TOP LEVEL VARIABLES ##

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# $NugetRepositoryCredential = [PSCredential]::new(
#     "username",
#     ("password" | ConvertTo-SecureString -AsPlainText -Force)
# )
# $RequestArguments.Credential = $NugetRepositoryCredential

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it
$ChocolateyDownloadUrl = "$($NugetRepositoryUrl.TrimEnd('/'))/package/chocolatey.0.11.3.nupkg"

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# $ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

#### Download the Nupkg, appending .zip to the filename to handle archive cmdlet limitations
if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    $TempDirectory = Join-Path $env:Temp "chocolateyInstall"
    if (-not (Test-Path $TempDirectory -PathType Container)) {
        $null = New-Item -Path $TempDirectory -ItemType Directory
    }
    $DownloadedNupkg = Join-Path $TempDirectory "$(Split-Path $ChocolateyDownloadUrl -Leaf).zip"
    Invoke-WebRequest -Uri $ChocolateyDownloadUrl -OutFile $DownloadedNupkg @RequestArguments

    #### Extract the Nupkg, and run the chocolateyInstall script
    if (Get-Command Microsoft.PowerShell.Archive\Expand-Archive -ErrorAction SilentlyContinue) {
        Microsoft.PowerShell.Archive\Expand-Archive -Path $DownloadedNupkg -DestinationPath $TempDirectory -Force
    } else {
        # PowerShell versions <4.0 do not have this function available
        try {
            $shellApplication = New-Object -ComObject Shell.Application
            $zipPackage = $shellApplication.NameSpace($DownloadedNupkg)
            $destinationFolder = $shellApplication.NameSpace($TempDirectory)
            $destinationFolder.CopyHere($zipPackage.Items(), 0x10)
        } catch {
            Write-Warning "Unable to unzip package using built-in compression."
            throw $_
        }
    }

    & $(Join-Path $TempDirectory "tools\chocolateyInstall.ps1")
}

if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    refreshenv
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# choco feature enable -n useFipsCompliantChecksums

### b. Apply Recommended Configuration ###
#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
choco config set --name cacheLocation --value C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
choco config set --name commandExecutionTimeoutSeconds --value 14400

#### Turn off download progress when running choco through integrations
choco feature disable --name showDownloadProgress

### c. Sources ###
#### Remove the default community package repository source
choco source list --limitoutput | ConvertFrom-Csv -Header 'Name', 'Location' -Delimiter '|' | ForEach-Object {
    if ($_.Location -eq 'https://community.chocolatey.org/api/v2/') {
        choco source remove -n $_.Name
    }
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
if ($NugetRepositoryCredential) {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --user $NugetRepositoryCredential.UserName --password $NugetRepositoryCredential.GetNetworkCredential().Password --priority 1
} else {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --priority 1
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
choco upgrade chocolatey --confirm

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
choco install chocolatey-license --source $NugetRepositoryUrl --confirm

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco source disable --name chocolatey.licensed
} else {
    Write-Warning "Not disabling 'chocolatey.licensed' feed, as Chocolatey-License has not been installed."
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco install chocolatey.extension --source $NugetRepositoryUrl --confirm
} else {
    Write-Warning "Not installing 'chocolatey.extension', as Chocolatey-License has not been installed."
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
choco feature disable --name showNonElevatedWarnings
choco feature enable --name useBackgroundService
choco feature enable --name useBackgroundServiceWithNonAdministratorsOnly
choco feature enable --name allowBackgroundServiceUninstallsFromUserInstallsOnly
choco config set --name allowedBackgroundServiceCommands --value "install,upgrade,uninstall"

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if ($ChocolateyCentralManagementUrl) {
    choco install chocolatey-agent --source $NugetRepositoryUrl --confirm
    choco config set --name CentralManagementServiceUrl --value $ChocolateyCentralManagementUrl
    if ($ChocolateyCentralManagementClientSalt) {
        choco config set --name centralManagementClientCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementClientSalt
    }
    if ($ChocolateyCentralManagementServiceSalt) {
        choco config set --name centralManagementServiceCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementServiceSalt
    }
    choco feature enable --name useChocolateyCentralManagement
    choco feature enable --name useChocolateyCentralManagementDeployments
}

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. chocolatey.chocolatey
##### You will require the chocolatey.chocolatey collection to be installed
##### on all machines using this playbook.
##### Please see https://github.com/chocolatey/chocolatey-ansible/#installing-the-collection-from-ansible-galaxy

- name: Install and Configure Chocolatey
  hosts: all

## 2. TOP LEVEL VARIABLES ##
  vars:

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
    nuget_repository_url: INTERNAL REPO URL

### b. Internal Repository Credential ###
#### If required, add the repository access credential here and
#### uncomment lines with source_username and source_password below
#    nuget_repository_username: username
#    nuget_repository_password: password

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#    chocolatey_central_management_url: https://chocolatey-central-management:24020/ChocolateyManagementService

#### ii. If using a Client Salt, add it here
#    chocolatey_central_management_client_salt: clientsalt

#### iii. If using a Service Salt, add it here
#    chocolatey_central_management_service_salt: servicesalt

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

  tasks:
  - name: Install chocolatey
    win_chocolatey:
      name: chocolatey
      source: {{ nuget_repository_url }}
      # source_username: {{ nuget_repository_username }}
      # source_password: {{ nuget_repository_password }}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#   - name: Enable FIPS compliance
#     win_chocolatey_feature:
#       name: useFipsCompliantChecksums
#       state: enabled

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
  - name: Set the cache location
    win_chocolatey_config:
      name: cacheLocation
      state: present
      value: C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
  - name: Set the command execution timeout
    win_chocolatey_config:
      name: commandExecutionTimeoutSeconds
      state: present
      value: 14400

#### Turn off download progress when running choco through integrations
  - name: Disable showing download progress
    win_chocolatey_feature:
      name: showDownloadProgress
      state: disabled

### c. Sources ###
#### Remove the default community package repository source
  - name: Remove Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey
      state: absent

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here
#### NOTE: This EXAMPLE may require changes
  - name: Add Internal Repository
    win_chocolatey_source:
      name: ChocolateyInternal
      state: present
      source: {{ nuget_repository_url }}
      # source_username: {{ nuget_repository_username }}
      # source_password: {{ nuget_repository_password }}
      priority: 1

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
  - name: Upgrade Chocolatey
    win_chocolatey:
      name: chocolatey
      state: latest

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.
### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
  - name: Install Chocolatey License
    win_chocolatey:
      name: chocolatey-license
      source: ChocolateyInternal
      state: latest

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
  - name: Disable Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey.licensed
      state: disabled

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
  - name: Install Chocolatey Extension
    win_chocolatey:
      name: chocolatey.extension
      source: ChocolateyInternal
      state: latest

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
  - name: Hide not-elevated warnings
    win_chocolatey_feature:
      name: showNonElevatedWarnings
      state: disabled

  - name: Use background mode for self-service
    win_chocolatey_feature:
      name: useBackgroundService
      state: enabled

  - name: Use background service for non-admins
    win_chocolatey_feature:
      name: useBackgroundServiceWithNonAdministratorsOnly
      state: enabled

  - name: Allow background uninstallation for user installs
    win_chocolatey_feature:
      name: allowBackgroundServiceUninstallsFromUserInstallsOnly
      state: enabled

  - name: Set allowed background service commands
    win_chocolatey_config:
      name: backgroundServiceAllowedCommands
      state: present
      value: install,upgrade,uninstall

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
  - name: Install Chocolatey Agent
    when: chocolatey_central_management_url is defined
    win_chocolatey:
      name: chocolatey-agent
      source: ChocolateyInternal
      state: latest

  - name: Set the Central Management Service URL
    when: chocolatey_central_management_url is defined
    win_chocolatey_config:
      name: CentralManagementServiceUrl
      state: present
      value: {{ chocolatey_central_management_url }}

  - name: Set the Central Management Client Salt
    when: chocolatey_central_management_client_salt is defined
    win_chocolatey_config:
      name: centralManagementClientCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_client_salt }}

  - name: Set the Central Management Service Salt
    when: chocolatey_central_management_service_salt is defined
    win_chocolatey_config:
      name: centralManagementServiceCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_service_salt }}

  - name: Use Central Management
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagement
      state: enabled

  - name: Use Central Management Deployments
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagementDeployments
      state: enabled

See docs at https://docs.chef.io/resource_chocolatey_package.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### The Chocolatey resources are available with any recent version of Chef.
#### We utilise the Chocolatey recipe to install the Chocolatey binaries.
include_recipe "chocolatey"

## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# NugetRepositoryUsername = "username"
# NugetRepositoryPassword = "password"

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
ChocolateyNupkgUrl = "INTERNAL REPO URL/package/chocolatey.0.11.3.nupkg",

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
node['chocolatey']['install vars'] = {
  'chocolateyDownloadUrl' => "#{ChocolateyNupkgUrl}",
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# chocolatey_feature 'useFipsCompliantChecksums' do
#   action :enable
# end

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolatey_config 'cacheLocation' do
  value 'C:\ProgramData\chocolatey\cache'
end

#### Increase timeout to at least 4 hours
chocolatey_config 'commandExecutionTimeoutSeconds' do
  value '14400'
end

#### Turn off download progress when running choco through integrations
chocolatey_feature 'showDownloadProgress' do
  action :disable
end

### c. Sources ###
#### Remove the default community package repository source
chocolatey_source 'chocolatey' do
  action :remove
end

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
chocolatey_source 'ChocolateyInternal' do
  source "#{NugetRepositoryUrl}"
  priority 1
  action   :add
end

execute 'ChocolateyInternal' do
  command "choco source add --name ChocolateyInternal -s #{NugetRepositoryUrl} -u=#{NugetRepositoryUsername} -p=#{NugetRepositoryPassword} --priority=1"
  only_if { NugetRepositoryUsername != nil || NugetRepositoryPassword != nil }
end

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
chocolatey_package 'chocolatey' do
  action :upgrade
  source "#{NugetRepositoryUrl}"
end

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
chocolatey_package 'chocolatey-license' do
  action :install
  source "#{NugetRepositoryUrl}"
end

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
chocolatey_source 'chocolatey.licensed' do
  action            :disable
end

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
chocolatey_package 'chocolatey.extention' do
  action     install
  source     "#{NugetRepositoryUrl}"
end

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolatey_feature 'showNonElevatedWarnings' do
  action :disable
end

chocolatey_feature 'useBackgroundService' do
  action :enable
end

chocolatey_feature 'useBackgroundServiceWithNonAdministratorsOnly' do
  action :enable
end

chocolatey_feature 'allowBackgroundServiceUninstallsFromUserInstallsOnly' do
  action :enable
end

chocolatey_config 'backgroundServiceAllowedCommands' do
  value 'install,upgrade,uninstall'
end

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
chocolatey_package 'chocolatey-agent' do
  action     install
  source     "#{NugetRepositoryUrl}"
  # user       "#{NugetRepositoryUsername}"
  # password   "#{NugetRepositoryPassword}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'CentralManagementServiceUrl' do
  value  "#{ChocolateyCentralManagementUrl}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'centralManagementClientCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementClientSalt}"
  only_if { ChocolateyCentralManagementClientSalt != nil }
end

chocolatey_config 'centralManagementServiceCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementServiceSalt}"
  only_if { ChocolateyCentralManagementServiceSalt != nil }
end

chocolatey_feature 'useChocolateyCentralManagement' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_feature 'useChocolateyCentralManagementDeployments' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.

If Applicable - Chocolatey Configuration/Installation


#requires -Modules cChoco
## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires chocolatey\cChoco DSC module to be installed on the machine compiling the DSC manifest
#### NOTE: This will need to be installed before running the DSC portion of this script
if (-not (Get-Module cChoco -ListAvailable)) {
    $null = Install-PackageProvider -Name NuGet -MinimumVersion 2.8.5.201 -Force
    if (($PSGallery = Get-PSRepository -Name PSGallery).InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy Trusted
    }
    Install-Module -Name cChoco
    if ($PSGallery.InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy $PSGallery.InstallationPolicy
    }
}

#### ii. Requires a hosted copy of the install.ps1 script
##### This should be available to download without authentication.
##### The original script can be found here: https://community.chocolatey.org/install.ps1

Configuration ChocolateyConfig {
## 2. TOP LEVEL VARIABLES ##
    param(
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
        $NugetRepositoryUrl      = "INTERNAL REPO URL",

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
        $ChocolateyNupkgUrl      = "INTERNAL REPO URL/package/chocolatey.0.11.3.nupkg",

### c. Internal Repository Credential ###
#### If required, add the repository access credential here
#        $NugetRepositoryCredential = [PSCredential]::new(
#            "username",
#            ("password" | ConvertTo-SecureString -AsPlainText -Force)
#        ),

### d. Install.ps1 URL
#### The path to the hosted install script:
        $ChocolateyInstallPs1Url = "https://community.chocolatey.org/install.ps1"

### e. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#        $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService",

#### ii. If using a Client Salt, add it here
#        $ChocolateyCentralManagementClientSalt = "clientsalt",

#### iii. If using a Service Salt, add it here
#        $ChocolateyCentralManagementServiceSalt = "servicesalt"
    )
    Import-DscResource -ModuleName PSDesiredStateConfiguration
    Import-DscResource -ModuleName cChoco

    Node 'localhost' {
## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
        Environment chocoDownloadUrl {
            Name  = "chocolateyDownloadUrl"
            Value = $ChocolateyNupkgUrl
        }

        cChocoInstaller installChocolatey {
            DependsOn = "[Environment]chocoDownloadUrl"
            InstallDir = Join-Path $env:ProgramData "chocolatey"
            ChocoInstallScriptUrl = $ChocolateyInstallPs1Url
        }

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#        cChocoFeature featureFipsCompliance {
#            FeatureName = "useFipsCompliantChecksums"
#        }

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
        cChocoConfig cacheLocation {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "cacheLocation"
            Value      = "C:\ProgramData\chocolatey\cache"
        }

#### Increase timeout to at least 4 hours
        cChocoConfig commandExecutionTimeoutSeconds {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "commandExecutionTimeoutSeconds"
            Value      = 14400
        }

#### Turn off download progress when running choco through integrations
        cChocoFeature showDownloadProgress {
            DependsOn   = "[cChocoInstaller]installChocolatey"
            FeatureName = "showDownloadProgress"
            Ensure      = "Absent"
        }

### c. Sources ###
#### Remove the default community package repository source
        cChocoSource removeCommunityRepository {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name       = "chocolatey"
            Ensure     = "Absent"
        }

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here.
#### NOTE: This EXAMPLE may require changes
        cChocoSource addInternalSource {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name        = "ChocolateyInternal"
            Source      = $NugetRepositoryUrl
            Credentials = $NugetRepositoryCredential
            Priority    = 1
        }

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
        cChocoPackageInstaller updateChocolatey {
            DependsOn   = "[cChocoSource]addInternalSource", "[cChocoSource]removeCommunityRepository"
            Name        = "chocolatey"
            AutoUpgrade = $true
        }

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
        cChocoPackageInstaller chocolateyLicense {
            DependsOn = "[cChocoPackageInstaller]updateChocolatey"
            Name      = "chocolatey-license"
        }

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
        Script disableLicensedSource {
            DependsOn  = "[cChocoPackageInstaller]chocolateyLicense"
            GetScript  = {
                $Source = choco source list --limitoutput | `
                    ConvertFrom-Csv -Delimiter '|' -Header Name, Source, Disabled | `
                    Where-Object Name -eq "chocolatey.licensed"

                return @{
                    Result = if ($Source) {
                        [bool]::Parse($Source.Disabled)
                    } else {
                        Write-Warning "Source 'chocolatey.licensed' was not present."
                        $true  # Source does not need disabling
                    }
                }
            }
            SetScript  = {
                $null = choco source disable --name "chocolatey.licensed"
            }
            TestScript = {
                $State = [ScriptBlock]::Create($GetScript).Invoke()
                return $State.Result
            }
        }

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
        cChocoPackageInstaller chocolateyLicensedExtension {
            DependsOn = "[Script]disableLicensedSource"
            Name      = "chocolatey.extension"
        }

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
        cChocoFeature hideElevatedWarnings {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "showNonElevatedWarnings"
            Ensure      = "Absent"
        }

        cChocoFeature useBackgroundService {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundService"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceWithNonAdmins {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundServiceWithNonAdministratorsOnly"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceUninstallsForUserInstalls {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "allowBackgroundServiceUninstallsFromUserInstallsOnly"
            Ensure      = "Present"
        }

        cChocoConfig allowedBackgroundServiceCommands {
            DependsOn   = "[cChocoFeature]useBackgroundService"
            ConfigName = "backgroundServiceAllowedCommands"
            Value       = "install,upgrade,uninstall"
        }

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
        if ($ChocolateyCentralManagementUrl) {
            cChocoPackageInstaller chocolateyAgent {
                DependsOn = "[cChocoPackageInstaller]chocolateyLicensedExtension"
                Name      = "chocolatey-agent"
            }

            cChocoConfig centralManagementServiceUrl {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                ConfigName = "CentralManagementServiceUrl"
                Value       = $ChocolateyCentralManagementUrl
            }

            if ($ChocolateyCentralManagementClientSalt) {
                cChocoConfig centralManagementClientSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementClientCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementClientSalt
                }
            }

            if ($ChocolateyCentralManagementServiceSalt) {
                cChocoConfig centralManagementServiceSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementServiceCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementServiceSalt
                }
            }

            cChocoFeature useCentralManagement {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagement"
                Ensure      = "Present"
            }

            cChocoFeature useCentralManagementDeployments {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagementDeployments"
                Ensure      = "Present"
            }
        }
    }
}

# If working this into an existing configuration with a good method for 
$ConfigData = @{
    AllNodes = @(
        @{
            NodeName                    = "localhost"
            PSDscAllowPlainTextPassword = $true
        }
    )
}

try {
    Push-Location $env:Temp
    $Config = ChocolateyConfig -ConfigurationData $ConfigData
    Start-DscConfiguration -Path $Config.PSParentPath -Wait -Verbose -Force
} finally {
    Pop-Location
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires puppetlabs/chocolatey module
####  See https://forge.puppet.com/puppetlabs/chocolatey


## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$_repository_url = 'INTERNAL REPO URL'

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
$_choco_download_url = 'INTERNAL REPO URL/package/chocolatey.0.11.3.nupkg'

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $_chocolatey_central_management_url = 'https://chocolatey-central-management:24020/ChocolateyManagementService'

#### ii. If using a Client Salt, add it here
# $_chocolatey_central_management_client_salt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $_chocolatey_central_management_service_salt = 'servicesalt'


## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
### Note: `chocolatey_download_url is completely different than normal
###  source locations. This is directly to the bare download url for the
###  chocolatey.nupkg, similar to what you see when you browse to
###  https://community.chocolatey.org/api/v2/package/chocolatey
class {'chocolatey':
  chocolatey_download_url => $_choco_download_url,
  use_7zip                => false,
}


## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations

#chocolateyfeature {'useFipsCompliantChecksums':
#  ensure => enabled,
#}

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolateyconfig {'cacheLocation':
  value => 'C:\ProgramData\chocolatey\cache',
}

#### Increase timeout to at least 4 hours
chocolateyconfig {'commandExecutionTimeoutSeconds':
  value => '14400',
}

#### Turn off download progress when running choco through integrations
chocolateyfeature {'showDownloadProgress':
  ensure => disabled,
}

### c. Sources ###
#### Remove the default community package repository source
chocolateysource {'chocolatey':
  ensure   => absent,
  location => 'https://community.chocolatey.org/api/v2/',
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE requires changes
chocolateysource {'internal_chocolatey':
  ensure             => present,
  location           => $_repository_url,
  priority           => 1,
  username           => 'optional',
  password           => 'optional,not ensured',
  bypass_proxy       => true,
  admin_only         => false,
  allow_self_service => false,
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/

package {'chocolatey':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}


## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/guides/organizations/organizational-deployment-guide#exercise-4-create-a-package-for-the-license

# TODO: Add resource for installing/ensuring the chocolatey-license package
package {'chocolatey-license':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
## Disabled sources still need all other attributes until
## https://tickets.puppetlabs.com/browse/MODULES-4449 is resolved.
## Password is necessary with user, but not ensurable, so it should not
## matter what it is set to here. If you ever do get into trouble here,
## the password is your license GUID.
chocolateysource {'chocolatey.licensed':
  ensure   => disabled,
  priority => '10',
  user     => 'customer',
  password => '1234',
  require  => Package['chocolatey-license'],
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
package {'chocolatey.extension':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
  require  => Package['chocolatey-license'],
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolateyfeature {'showNonElevatedWarnings':
  ensure => disabled,
}

chocolateyfeature {'useBackgroundService':
  ensure => enabled,
}

chocolateyfeature {'useBackgroundServiceWithNonAdministratorsOnly':
  ensure => enabled,
}

chocolateyfeature {'allowBackgroundServiceUninstallsFromUserInstallsOnly':
  ensure => enabled,
}

chocolateyconfig {'backgroundServiceAllowedCommands':
  value => 'install,upgrade,uninstall',
}

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if $_chocolatey_central_management_url {
  package {'chocolatey-agent':
    ensure   => latest,
    provider => chocolatey,
    source   => $_repository_url,
    require  => Package['chocolatey-license'],
  }

  chocolateyconfig {'CentralManagementServiceUrl':
    value   => $_chocolatey_central_management_url,
  }

  if $_chocolatey_central_management_client_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  if $_chocolatey_central_management_service_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  chocolateyfeature {'useChocolateyCentralManagement':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }

  chocolateyfeature {'useChocolateyCentralManagementDeployments':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }
}

There is already a version of this package in your Script Builder

Current Version	New Version

Passing
Failing
Pending
Unknown / Exempted

Downloads:

69,289

Downloads of v 9.1.1:

346

Last Update:

03 May 2017

Package Maintainer(s):

majkinetor

Software Author(s):

Gitlab

Tags:

admin cli foss git cross-platform build gitlab

Gitlab Runner

This is not the latest version of Gitlab Runner available.

9.1.1 | Updated: 03 May 2017

Downloads:

69,289

Downloads of v 9.1.1:

346

Maintainer(s):

majkinetor

Software Author(s):

Gitlab

Tags:

admin cli foss git cross-platform build gitlab

1

2

3

Gitlab Runner 9.1.1

This is not the latest version of Gitlab Runner available.

All Checks are Passing

3 Passing Tests

Show Checks

Validation Testing Passed

Verification Testing Passed

Details

Scan Testing Successful:

No detections found in any package files

Details

Deployment Method: Individual Install, Upgrade, & Uninstall

To install Gitlab Runner, run the following command from the command line or from PowerShell:

To upgrade Gitlab Runner, run the following command from the command line or from PowerShell:

To uninstall Gitlab Runner, run the following command from the command line or from PowerShell:

📝 NOTE: This applies to both open source and commercial editions of Chocolatey.

1. Enter Your Internal Repository Url

(this should look similar to https://community.chocolatey.org/api/v2/)

2. Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the package and push it to a repository Download

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the package:
  Download
- Follow manual internalization instructions

Package Internalizer (C4B)

Run: (additional options)

choco download gitlab-runner --internalize --version=9.1.1 --source=https://community.chocolatey.org/api/v2/

For package and dependencies run:

choco push --source="'INTERNAL REPO URL'"

Automate package internalization

3. Copy Your Script

choco upgrade gitlab-runner -y --source="'INTERNAL REPO URL'" --version="'9.1.1'" [other options]

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:


choco upgrade gitlab-runner -y --source="'INTERNAL REPO URL'" --version="'9.1.1'" 
$exitCode = $LASTEXITCODE

Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
  Exit 0
}

Exit $exitCode


- name: Install gitlab-runner
  win_chocolatey:
    name: gitlab-runner
    version: '9.1.1'
    source: INTERNAL REPO URL
    state: present

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.


chocolatey_package 'gitlab-runner' do
  action    :install
  source   'INTERNAL REPO URL'
  version  '9.1.1'
end

See docs at https://docs.chef.io/resource_chocolatey_package.html.


cChocoPackageInstaller gitlab-runner
{
    Name     = "gitlab-runner"
    Version  = "9.1.1"
    Source   = "INTERNAL REPO URL"
}

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.


package { 'gitlab-runner':
  ensure   => '9.1.1',
  provider => 'chocolatey',
  source   => 'INTERNAL REPO URL',
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

4. If applicable - Chocolatey configuration/installation

See infrastructure management matrix for Chocolatey configuration elements and examples.

This package was approved as a trusted package on 03 May 2017.

Description

GitLab Runner is the open source project that is used to run your jobs and send the results back to GitLab. It is used in conjunction with GitLab CI, the open-source continuous integration service included with GitLab that coordinates the jobs.

Features

Allows to run:
- multiple jobs concurrently
- use multiple tokens with multiple server (even per-project)
- limit number of concurrent jobs per-token
Jobs can be run:
- locally
- using Docker containers
- using Docker containers and executing job over SSH
- using Docker containers with autoscaling on different clouds and virtualization hypervisors
- connecting to remote SSH server
Is written in Go and distributed as single binary without any other requirements
Supports Bash, Windows Batch and Windows PowerShell
Works on GNU/Linux, OS X and Windows (pretty much anywhere you can run Docker)
Allows to customize the job running environment
Automatic configuration reload without restart
Easy to use setup with support for Docker, Docker-SSH, Parallels or SSH running environments
Enables caching of Docker containers
Easy installation as a service for GNU/Linux, OSX and Windows
Embedded Prometheus metrics HTTP server

Package parameters

InstallDir - Installation directory. If the Gitlab Runner is already installed, its current directory will be used. To install to a new directory, uninstall it first.

Notes

The script register_example.ps1 is provided along the executable which can be used to quickly register runner non-interactively. If you want to use it, rename it, because it will be overwritten on updates.

Files

tools\chocolateyBeforeModify.ps1

Get-Service gitlab-runner -ea 0 | Stop-Service

tools\chocolateyInstall.ps1

$ErrorActionPreference = 'Stop'

$toolsPath = Split-Path $MyInvocation.MyCommand.Definition
. $toolsPath\helpers.ps1

$pp = Get-PackageParameters
$current_dir = Get-RunnerInstallDir

if ($current_dir) {
    Write-Host 'Using previous gitlab-runner install path:' $current_dir
    $pp.InstallDir = $current_dir
} else {
    if (!$pp.InstallDir) { $pp.InstallDir = "C:\GitLab-Runner" }
    Write-Host 'Using install directory:' $pp.InstallDir
}

$tmp_path = Join-Path (Get-PackageCacheLocation)  "gitlab-runner.exe"
$packageArgs = @{
  packageName    = 'gitlab-runner'
  fileFullPath   = $tmp_path
  url            = 'https://gitlab-ci-multi-runner-downloads.s3.amazonaws.com/v9.1.1/binaries/gitlab-ci-multi-runner-windows-386.exe'
  url64Bit       = 'https://gitlab-ci-multi-runner-downloads.s3.amazonaws.com/v9.1.1/binaries/gitlab-ci-multi-runner-windows-amd64.exe'
  checksum       = 'b2f867bd28e59ef8895c39a1f2360f490a95b1989c9c7e225ad7a6153a6e0c87'
  checksum64     = '429d6e191556ab6ebf769fd160cc56d0cafd6e5a2ce153631480e0fd1e9ae88e'
  checksumType   = 'sha256'
  checksumType64 = 'sha256'
}
Get-ChocolateyWebFile @packageArgs

Get-Service gitlab-runner -ea 0 | Stop-Service
mkdir $pp.InstallDir -ea 0 | Out-Null
cp $tmp_path, $toolsPath\register_example.ps1 $pp.InstallDir -force

$runner_path = $pp.InstallDir + '\gitlab-runner.exe'
Install-BinFile gitlab-runner $runner_path

tools\chocolateyUninstall.ps1

$toolsPath = Split-Path $MyInvocation.MyCommand.Definition
. $toolsPath\helpers.ps1

$installDir = Get-RunnerInstallDir
if (!$current_dir) { Write-Warning "Can't find gitlab-runner installation directory, aborting"; return }

pushd $installDir
.\gitlab-runner.exe stop
.\gitlab-runner.exe uninstall
popd

rm $installDir -Force

tools\helpers.ps1

function Get-RunnerInstallDir() {
    $res = Get-WmiObject win32_service | ? {$_.Name -eq 'gitlab-runner'} | select -Expand PathName
    if (!$res) { return }
    $res = $res -split '\\gitlab-runner.exe' | select -First 1
    if (Test-Path $res) { return $res }
}

tools\register_example.ps1

# For the list of all environment vars run `gitlab-runner register --help`

$Env:REGISTRATION_TOKEN         = ''
$Env:CI_SERVER_URL              = ''
$Env:RUNNER_TAG_LIST            = ''

$Env:RUNNER_NAME                = ''
$Env:RUNNER_EXECUTOR            = 'shell'
$Env:RUNNER_SHELL               = 'powershell'

$Env:CONFIG_FILE                = "$PSScriptRoot\config.toml"
$Env:REGISTER_RUN_UNTAGGED      = 'false'
$Env:RUNNER_REQUEST_CONCURRENCY = 1
$Env:RUNNER_BUILDS_DIR          = ''
$Env:RUNNER_CACHE_DIR           = ''

gitlab-runner register --non-interactive

Virus Scan Results

gitlab-runner.9.1.1.nupkg (9e45df714056) - ## / 58
gitlab-runner.exe (429d6e191556) - ## / 60
gitlab-runner.exe (b2f867bd28e5) - ## / 62

In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).

Chocolatey Pro provides runtime protection from possible malware.

Version History

Version	Downloads	Last Updated	Status
Gitlab Runner 14.5.0	233	Monday, November 22, 2021	Approved
Gitlab Runner 14.4.0	890	Tuesday, October 26, 2021	Approved
Gitlab Runner 14.3.0	1024	Wednesday, September 22, 2021	Approved
Gitlab Runner 14.2.0	1083	Saturday, August 28, 2021	Approved
Gitlab Runner 14.0.0	1957	Sunday, June 20, 2021	Approved
Gitlab Runner 13.12.0	1605	Friday, May 21, 2021	Approved
Gitlab Runner 13.11.0	928	Wednesday, April 21, 2021	Approved
Gitlab Runner 13.10.0	1557	Monday, March 22, 2021	Approved
Gitlab Runner 13.9.0	1205	Tuesday, February 23, 2021	Approved
Gitlab Runner 13.8.0	1612	Thursday, January 21, 2021	Approved
Gitlab Runner 13.7.0	1301	Tuesday, December 22, 2020	Approved
Gitlab Runner 13.6.0.20201205	600	Saturday, December 5, 2020	Approved
Gitlab Runner 13.6.0	908	Sunday, November 22, 2020	Approved
Gitlab Runner 13.5.0	9083	Wednesday, October 21, 2020	Approved
Gitlab Runner 13.4.0	162	Saturday, September 19, 2020	Approved
Gitlab Runner 13.3.0	3108	Friday, August 21, 2020	Approved
Gitlab Runner 13.2.0	1535	Monday, July 20, 2020	Approved
Gitlab Runner 13.1.0	1342	Saturday, June 20, 2020	Approved
Gitlab Runner 13.0.1	1108	Monday, June 1, 2020	Approved
Gitlab Runner 13.0.0	735	Thursday, May 21, 2020	Approved
Gitlab Runner 12.10.0	2698	Wednesday, April 22, 2020	Approved
Gitlab Runner 12.9.0	638	Tuesday, April 14, 2020	Approved
Gitlab Runner 12.8.0	2384	Sunday, February 23, 2020	Approved
Gitlab Runner 12.7.1	1022	Friday, January 24, 2020	Approved
Gitlab Runner 12.7.0	202	Tuesday, January 21, 2020	Approved
Gitlab Runner 12.6.0	467	Tuesday, December 24, 2019	Approved
Gitlab Runner 12.5.0	974	Thursday, November 21, 2019	Approved
Gitlab Runner 12.4.1	982	Tuesday, October 29, 2019	Approved
Gitlab Runner 12.4.0	401	Tuesday, October 22, 2019	Approved
Gitlab Runner 12.3.0	2075	Saturday, September 21, 2019	Approved
Gitlab Runner 12.2.0	1128	Friday, August 23, 2019	Approved
Gitlab Runner 12.1.0	996	Saturday, July 20, 2019	Approved
Gitlab Runner 12.0.0	1555	Saturday, June 22, 2019	Approved
Gitlab Runner 11.11.2	752	Tuesday, June 4, 2019	Approved
Gitlab Runner 11.11.0	398	Tuesday, May 21, 2019	Approved
Gitlab Runner 11.10.0	683	Saturday, April 20, 2019	Approved
Gitlab Runner 11.9.0	604	Saturday, March 23, 2019	Approved
Gitlab Runner 11.8.0	784	Saturday, February 23, 2019	Approved
Gitlab Runner 11.7.0	916	Tuesday, January 22, 2019	Approved
Gitlab Runner 11.6.0	279	Friday, January 18, 2019	Approved
Gitlab Runner 11.4.0	1382	Monday, October 22, 2018	Approved
Gitlab Runner 11.4.0-rc1	216	Thursday, October 11, 2018	Exempted
Gitlab Runner 11.3.0	744	Saturday, September 22, 2018	Approved
Gitlab Runner 11.3.0-rc1	212	Wednesday, September 12, 2018	Exempted
Gitlab Runner 11.2.0	649	Thursday, August 23, 2018	Approved
Gitlab Runner 11.2.0-rc1	202	Thursday, August 9, 2018	Approved
Gitlab Runner 11.1.0	660	Monday, July 23, 2018	Approved
Gitlab Runner 11.1.0-rc1	256	Saturday, July 14, 2018	Approved
Gitlab Runner 11.0.0	836	Saturday, June 23, 2018	Approved
Gitlab Runner 11.0.0-rc1	256	Wednesday, June 13, 2018	Approved
Gitlab Runner 10.8.0	713	Wednesday, May 23, 2018	Approved
Gitlab Runner 10.8.0-rc1	309	Friday, May 11, 2018	Approved
Gitlab Runner 10.7.0-rc1	365	Thursday, April 12, 2018	Approved
Gitlab Runner 10.6.0	1005	Friday, March 23, 2018	Approved
Gitlab Runner 10.6.0-rc1	295	Friday, March 9, 2018	Approved
Gitlab Runner 10.5.0	565	Friday, February 23, 2018	Approved
Gitlab Runner 10.5.0-rc1	316	Friday, February 9, 2018	Approved
Gitlab Runner 10.4.0	572	Monday, January 22, 2018	Approved
Gitlab Runner 10.4.0-rc1	367	Tuesday, January 9, 2018	Approved
Gitlab Runner 10.3.0	617	Saturday, December 23, 2017	Approved
Gitlab Runner 10.3.0-rc1	344	Monday, December 11, 2017	Approved
Gitlab Runner 10.2.0	729	Thursday, November 23, 2017	Approved
Gitlab Runner 10.2.0-rc1	346	Saturday, November 11, 2017	Approved
Gitlab Runner 10.1.0	830	Sunday, October 22, 2017	Approved
Gitlab Runner 10.1.0-rc1	389	Tuesday, October 10, 2017	Approved
Gitlab Runner 10.0.0-rc1	318	Tuesday, September 26, 2017	Approved
Gitlab Runner 9.5.0	981	Wednesday, August 23, 2017	Approved
Gitlab Runner 9.4.0	607	Sunday, July 23, 2017	Approved
Gitlab Runner 9.3.0	444	Thursday, June 22, 2017	Approved
Gitlab Runner 9.2.1	338	Saturday, June 17, 2017	Approved
Gitlab Runner 9.2.0	414	Monday, May 22, 2017	Approved
Gitlab Runner 9.1.1	346	Wednesday, May 3, 2017	Approved
Gitlab Runner 9.1.0	357	Monday, April 24, 2017	Approved
Gitlab Runner 9.0.0	378	Thursday, March 30, 2017	Approved

GitLab

Release Notes

https://gitlab.com/gitlab-org/gitlab-ci-multi-runner/blob/master/CHANGELOG.md

Dependencies

- chocolatey-core.extension (≥ 1.2)
- git.install (≥ 2.12.2)

Discussion for the Gitlab Runner Package

Ground Rules:

This discussion is only about Gitlab Runner and the Gitlab Runner package. If you have feedback for Chocolatey, please contact the Google Group.
This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
Tell us what you love about the package or Gitlab Runner, or tell us what needs improvement.
Share your experiences with the package, or extra configuration or gotchas that you've found.
If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.

69,289

346

03 May 2017

Gitlab Runner

1 2 3 Gitlab Runner 9.1.1

All Checks are Passing

Deployment Method: Individual Install, Upgrade, & Uninstall

Deployment Method:

1. Enter Your Internal Repository Url

2. Setup Your Environment

1. Ensure you are set for organizational deployment

2. Get the package into your environment

3. Copy Your Script

4. If applicable - Chocolatey configuration/installation

Features

Package parameters

Notes

Ground Rules:

1

2

3

Gitlab Runner 9.1.1