Invoke-Build 5.12.1

<?xml version="1.0" encoding="utf-8"?>
<helpItems xmlns="http://msh" schema="maml">
<command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">
<command:details>
<command:name>Invoke-Build.ps1</command:name>
<maml:description>
<maml:para>Invoke-Build - Build Automation in PowerShell</maml:para>
</maml:description>
</command:details>
<maml:description>
<maml:para>The command invokes so called tasks defined in a PowerShell script.
Let&apos;s call this process build and a script with tasks build script.

A build script defines parameters, variables, and one or more tasks.
Any code is invoked with the current location set to $BuildRoot,
the script directory. $ErrorActionPreference is set to &apos;Stop&apos;.

SCRIPT PARAMETERS

Build scripts define parameters as usual using the param() block.
On calling, specify them for Invoke-Build as if they are its own.

Known issue #4. Specify script switches after Task and File.

The following parameter names are reserved for the engine:
Task, File, Result, Safe, Summary, WhatIf

COMMANDS AND HELP

The following commands are available for build scripts:

    task      (Add-BuildTask)
    exec      (Invoke-BuildExec)
    assert    (Assert-Build)
    equals    (Assert-BuildEquals)
    remove    (Remove-BuildItem)
    property  (Get-BuildProperty)
    requires  (Test-BuildAsset)
    use       (Use-BuildAlias)

    Confirm-Build
    Get-BuildError
    Get-BuildSynopsis
    Resolve-MSBuild
    Set-BuildFooter
    Set-BuildHeader
    Use-BuildEnv
    Write-Build
    Write-Warning [1]

[1] Write-Warning is redefined internally in order to count warnings in
a build script and nested scripts. Warnings in modules are not counted.

To get commands help, dot-source Invoke-Build and then call help:

    PS&gt; . Invoke-Build
    PS&gt; help task -full

SPECIAL ALIASES

    Invoke-Build
    Build-Parallel

These aliases are for the scripts Invoke-Build.ps1 and Build-Parallel.ps1.
Use them for calling nested builds, i.e. omit script extensions and paths.

PUBLIC VARIABLES

    $OriginalLocation - where the build is invoked
    $WhatIf - WhatIf mode, Invoke-Build parameter
    $BuildRoot - build script location, by default
    $BuildFile - build script path
    $BuildTask - initial tasks
    $Task - current task
    $Job - current job

$BuildRoot may be changed by scripts on loading in order to set a custom
build root directory. Other variables should not be changed.

$Task is available for script blocks defined by task parameters If, Inputs,
Outputs, and Jobs and by blocks Enter|Exit-BuildTask, Enter|Exit-BuildJob,
Set-BuildHeader, Set-BuildFooter.

    $Task properties:

    - Name - [string], task name
    - Jobs - [object[]], task jobs
    - Started - [DateTime], task start time

    And in Exit-BuildTask:

    - Error - task error or null
    - Elapsed - [TimeSpan], task duration

$Task is also defined in the script scope. It has the only property Name
which is set to $BuildFile, the build script path.

BUILD BLOCKS

Scripts may define special script blocks. They are invoked:

    Enter-Build {} - before the first task
    Exit-Build {} - after the last task

    Enter-BuildTask {} - before each task
    Exit-BuildTask {} - after each task

    Enter-BuildJob {} - before each task action
    Exit-BuildJob {} - after each task action

    Set-BuildHeader {param($Path)} - to write task headers
    Set-BuildFooter {param($Path)} - to write task footers

Blocks are not called on WhatIf.
Nested builds do not inherit parent blocks.
If Enter-X is called then Exit-X is also called, even on failures.

Enter-Build and Exit-Build are invoked in the script scope. Enter-Build is
suitable for initialization and it can output text unlike the build script.

Enter-BuildTask, Exit-BuildTask, Enter-BuildJob, and Exit-BuildJob are
invoked in the same scope, the parent of task action blocks.

PRIVATE STUFF

Function and variable names starting with &apos;*&apos; are reserved for the engine.</maml:para>
</maml:description>
<command:syntax>
<command:syntaxItem>
<maml:name>Invoke-Build.ps1</maml:name>
<command:parameter required="false" position="0" >
<maml:name>Task</maml:name>
<command:parameterValue required="true">String[]</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="1" >
<maml:name>File</maml:name>
<command:parameterValue required="true">Object</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Result</maml:name>
<command:parameterValue required="true">Object</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Safe</maml:name>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Summary</maml:name>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>WhatIf</maml:name>
</command:parameter>
</command:syntaxItem>
</command:syntax>
<command:parameters>
<command:parameter required="false" position="0" >
<maml:name>Task</maml:name>
<maml:description>
<maml:para>One or more tasks to be invoked. If it is not specified, null, empty,
or equal to &apos;.&apos; then the task &apos;.&apos; is invoked if it exists, otherwise
the first added task is invoked.

Names with wildcard characters are reserved for special cases.

SAFE REFERENCES

If a task &apos;X&apos; is referenced as &apos;?X&apos; then it is allowed to fail without
breaking the build, i.e. other tasks specified after X will be invoked.

SPECIAL TASKS

? - Tells to list tasks with brief information and check for errors.
Task synopses are defined in preceding comments as

    # Synopsis: ...

or

    &lt;#
    .Synopsis
    ...
    #&gt;

?? - Tells to collect and get all tasks as an ordered dictionary.
It can be used by external tools for analysis, completion, etc.

Tasks ? and ?? set $WhatIf to true. Properly designed build scripts
should not perform anything significant if $WhatIf is set to true.

* - Tells to invoke all tasks, for example when tasks are tests.

** - Invokes * for all files *.test.ps1 found recursively in the
current directory or a directory specified by the parameter File.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="1" >
<maml:name>File</maml:name>
<maml:description>
<maml:para>The script which adds tasks using the command &apos;task&apos; (Add-BuildTask).

If File is omitted then Invoke-Build looks for *.build.ps1 files in the
current location and takes the first in Sort-Object order.

If the file is not found then a command set by the environment variable
InvokeBuildGetFile is invoked with the directory path as an argument.
This command may return the full path of a special build script.

If the file is still not found then parent directories are searched.

DIRECTORY PATH

File accepts directory paths as well. The build script is resolved as
described above for the specified directory without searching parents.

INLINE SCRIPT

File also accepts script blocks. In this case $BuildFile is the calling
script, if any, or null. The default $BuildRoot is $BuildFile directory
or the current location.

Script parameters, parallel, and persistent builds are not supported.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Result</maml:name>
<maml:description>
<maml:para>Tells to make the build result. Normally it is the name of a variable
created in the calling scope. Or it is a hashtable which entry Value
contains the result.

Result properties:

    All - all available tasks
    Error - a terminating build error
    Tasks - invoked tasks including nested
    Errors - error objects including nested
    Warnings - warning objects including nested
    Redefined - list of original redefined tasks

Tasks is a list of objects:

    Name - task name
    Jobs - task jobs
    Error - task error
    Started - start time
    Elapsed - task duration
    InvocationInfo - task location (.ScriptName, .ScriptLineNumber)

Errors is a list of objects:

    Error - original error
    File - current $BuildFile
    Task - current $Task or null for other errors

Warnings is a list of objects:

    Message - warning message
    File - current $BuildFile
    Task - current $Task or null for other warnings

Do not change these data and do not use not documented members.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Safe</maml:name>
<maml:description>
<maml:para>Tells to catch a build failure, store an error as the property Error of
Result and return quietly. A caller should use Result and check Error.

Some exceptions are possible even in the safe mode. They show serious
errors, not build failures. For example, a build script is missing.

When Safe is used together with the special task ** (invoke *.test.ps1)
then task failures stop current test scripts, not the whole testing.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Summary</maml:name>
<maml:description>
<maml:para>Tells to show summary information after the build. It includes task
durations, names, locations, and error messages.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>WhatIf</maml:name>
<maml:description>
<maml:para>Tells to show tasks and jobs to be invoked and some analysis of used
parameters and environment variables. See Show-TaskHelp for details.

If a script does anything but adding tasks then it should check for
$WhatIf and skip the real actions in order to support WhatIf calls.
Alternatively, use the Enter-Build block for pre-build actions.</maml:para>
</maml:description>
</command:parameter>
</command:parameters>
<command:returnValues>
<command:returnValue>
<dev:type>
<maml:name>Text</maml:name>
</dev:type>
<maml:description>
<maml:para>Build log which includes task records and engine messages, warnings,
errors, and output from build script tasks and special blocks.

The script itself should not output anything. Unexpected script output
causes warnings, in the future it may be treated as an error.</maml:para>
</maml:description>
</command:returnValue>
</command:returnValues>
<command:examples>
<command:example>
<maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
<dev:code>## How to call Invoke-Build in order to deal with build failures.
## Use one of the below techniques or you may miss some failures.

## (1/2) If you do not want to catch errors and just want the calling
## script to stop on build failures then

$ErrorActionPreference = &apos;Stop&apos;
Invoke-Build ...

## (2/2) If you want to catch build errors and proceed further depending
## on them then use try/catch, $ErrorActionPreference does not matter:

try {
    Invoke-Build ...
    # Build completed
}
catch {
    # Build FAILED, $_ is the error
}</dev:code>
</command:example>
<command:example>
<maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
<dev:code># Invoke tasks Build and Test from the default script with parameters.
# The script defines parameters Output and WarningLevel by param().

Invoke-Build Build, Test -Output log.txt -WarningLevel 4</dev:code>
</command:example>
<command:example>
<maml:title>-------------------------- EXAMPLE 3 --------------------------</maml:title>
<dev:code># Show tasks in the default script and the specified script

Invoke-Build ?
Invoke-Build ? Project.build.ps1

# Custom formatting is possible, too

Invoke-Build ? | Format-Table -AutoSize
Invoke-Build ? | Format-List Name, Synopsis</dev:code>
</command:example>
<command:example>
<maml:title>-------------------------- EXAMPLE 4 --------------------------</maml:title>
<dev:code># Get task names without invoking for listing, TabExpansion, etc.

$all = Invoke-Build ??
$all.Keys</dev:code>
</command:example>
<command:example>
<maml:title>-------------------------- EXAMPLE 5 --------------------------</maml:title>
<dev:code># Invoke all in Test1.test.ps1 and all in Tests\...\*.test.ps1

Invoke-Build * Test1.test.ps1
Invoke-Build ** Tests</dev:code>
</command:example>
<command:example>
<maml:title>-------------------------- EXAMPLE 6 --------------------------</maml:title>
<dev:code># How to use build results, e.g. for summary

try {
    # Invoke build and get the variable Result
    Invoke-Build -Result Result
}
finally {
    # Show build error
    &quot;Build error: $(if ($Result.Error) {$Result.Error} else {&apos;None&apos;})&quot;

    # Show task summary
    $Result.Tasks | Format-Table Elapsed, Name, Error -AutoSize
}</dev:code>
</command:example>
</command:examples>
<maml:relatedLinks>
<maml:navigationLink>
<maml:linkText>Wiki</maml:linkText>
<maml:uri>https://github.com/nightroman/Invoke-Build/wiki</maml:uri>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>Project</maml:linkText>
<maml:uri>https://github.com/nightroman/Invoke-Build</maml:uri>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>Build-Checkpoint</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>Build-Parallel</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>For other commands, at first invoke:</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>PS&gt; . Invoke-Build</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>task      (Add-BuildTask)</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>exec      (Invoke-BuildExec)</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>assert    (Assert-Build)</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>equals    (Assert-BuildEquals)</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>remove    (Remove-BuildItem)</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>property  (Get-BuildProperty)</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>requires  (Test-BuildAsset)</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>use       (Use-BuildAlias)</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>Confirm-Build</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>Get-BuildError</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>Get-BuildSynopsis</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>Resolve-MSBuild</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>Set-BuildFooter</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>Set-BuildHeader</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>Write-Build</maml:linkText>
</maml:navigationLink>
</maml:relatedLinks>
</command:command>
<command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">
<command:details>
<command:name>Add-BuildTask</command:name>
<maml:description>
<maml:para>(task) Defines and adds a task.</maml:para>
</maml:description>
<command:verb>Add</command:verb>
<command:noun>BuildTask</command:noun>
</command:details>
<maml:description>
<maml:para>Scripts use its alias &apos;task&apos;. It is normally used in the build script scope
but it can be called from another script or function. Build scripts should
have at least one task.

This command is all that build scripts really need. Tasks are main build
blocks. Other build commands are helpers, scripts do not have to use them.

In addition to task parameters, you may use task help comments, synopses,
preceding task definitions:

    # Synopsis: ...
    task ...

Synopses are used in task help information returned by the command

    Invoke-Build ?

To get a task synopsis during a build, use Get-BuildSynopsis.</maml:para>
</maml:description>
<command:syntax>
<command:syntaxItem>
<maml:name>Add-BuildTask</maml:name>
<command:parameter required="true" position="0" >
<maml:name>Name</maml:name>
<command:parameterValue required="true">String</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="1" >
<maml:name>Jobs</maml:name>
<command:parameterValue required="true">Object</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>After</maml:name>
<command:parameterValue required="true">String[]</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Before</maml:name>
<command:parameterValue required="true">String[]</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Data</maml:name>
<command:parameterValue required="true">Object</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Done</maml:name>
<command:parameterValue required="true">Object</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>If</maml:name>
<command:parameterValue required="true">Object</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Inputs</maml:name>
<command:parameterValue required="true">Object</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Outputs</maml:name>
<command:parameterValue required="true">Object</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Source</maml:name>
<command:parameterValue required="true">Object</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Partial</maml:name>
</command:parameter>
</command:syntaxItem>
</command:syntax>
<command:parameters>
<command:parameter required="true" position="0" >
<maml:name>Name</maml:name>
<maml:description>
<maml:para>The task name. Wildcard characters are deprecated and &quot;?&quot; must not be
the first character. Duplicated names are allowed, each added task
overrides previously added with the same name.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="1" >
<maml:name>Jobs</maml:name>
<maml:description>
<maml:para>Specifies one or more task jobs or a hashtable with actual parameters.
Jobs are other task references and own actions, script blocks. Any
number of jobs is allowed. Jobs are invoked in the specified order.

Valid jobs are:

    [string] - an existing task name, normal reference
    [string] &quot;?Name&quot; - safe reference to a task allowed to fail
    [scriptblock] - action, a script block invoked for this task

Special value:

    [hashtable] which contains the actual task parameters in addition
    to the task name. This task definition is more convenient with
    complex parameters, often typical for incremental tasks.

    Example:
        task Name @{
            Inputs = {...}
            Outputs = {...}
            Partial = $true
            Jobs = {
                process {...}
            }
        }</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>After</maml:name>
<maml:description>
<maml:para>Tells to add this task to the end of jobs of the specified tasks.

Altered tasks are defined as normal references (TaskName) or safe
references (?TaskName). In the latter case this inserted task may
fail without stopping a build.

Parameters After and Before are used in order to alter task jobs
in special cases when direct changes in task source code are not
suitable. Use Jobs in order to define relations in usual cases.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Before</maml:name>
<maml:description>
<maml:para>Tells to insert this task to jobs of the specified tasks.
It is inserted before the first action or added to the end.

See After for details.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Data</maml:name>
<maml:description>
<maml:para>Any object attached to the task. It is not used by the engine.
When the task is invoked this object is available as $Task.Data.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Done</maml:name>
<maml:description>
<maml:para>Specifies the command or a script block which is invoked after the
task. Custom handlers should check for $Task.Error if it matters.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>If</maml:name>
<maml:description>
<maml:para>Specifies the optional condition to be evaluated. If the condition
evaluates to false then the task is not invoked. The condition is
defined in one of two ways depending on the requirements.

Using standard Boolean notation (parenthesis) the condition is checked
once when the task is defined. A use case for this notation might be
evaluating a script parameter or another sort of global condition.

    Example:
        task Task1 -If ($Param1 -eq ...) {...}
        task Task2 -If ($PSVersionTable.PSVersion.Major -ge 5) {...}

Using script block notation (curly braces) the condition is evaluated
on task invocation. If a task is referenced by several tasks then the
condition is evaluated each time until it gets true and the task is
invoked. The script block notation is normally used for a condition
that may be defined or changed during the build or just expensive.

    Example:
        task SomeTask -If {...} {...}</maml:para>
</maml:description>
<dev:defaultValue>$true</dev:defaultValue>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Inputs</maml:name>
<maml:description>
<maml:para>Specifies the input items, tells to process the task as incremental,
and requires the parameter Outputs with the optional switch Partial.

Inputs are file items or paths or a script block which gets them.

Outputs are file paths or a script block which gets them.
A script block is invoked with input paths piped to it.

Automatic variables for incremental task actions:

    $Inputs - full input paths, array of strings
    $Outputs - result of the evaluated Outputs

With the switch Partial the task is processed as partial incremental.
There must be one-to-one correspondence between Inputs and Outputs.

Partial task actions often contain &quot;process {}&quot; blocks.
Two more automatic variables are available for them:

    $_ - full path of an input item
    $2 - corresponding output path

See also wiki topics about incremental tasks:
https://github.com/nightroman/Invoke-Build/wiki</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Outputs</maml:name>
<maml:description>
<maml:para>Specifies the output paths of the incremental task, either directly on
task creation or as a script block invoked with the task. It is used
together with Inputs. See Inputs for details.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Partial</maml:name>
<maml:description>
<maml:para>Tells to process the incremental task as partial incremental.
It is used with Inputs and Outputs. See Inputs for details.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Source</maml:name>
<maml:description>
<maml:para>Specifies the task source. It is used by wrapper functions in order to
provide the actual source for location messages and synopsis comments.</maml:para>
</maml:description>
</command:parameter>
</command:parameters>
<command:examples>
<command:example>
<maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
<dev:code># Dummy task with no jobs
task Task1

# Alias of another task
task Task2 Task1

# Combination of tasks
task Task3 Task1, Task2

# Simple action task
task Task4 {
    # action
}

# Typical complex task: referenced task(s) and one own action
task Task5 Task1, Task2, {
    # action after referenced tasks
}

# Possible complex task: actions and tasks in any required order
task Task6 {
    # action before Task1
},
Task1, {
    # action after Task1 and before Task2
},
Task2</dev:code>
<dev:remarks>
<maml:para>This example shows various possible combinations of task jobs.</maml:para>
<maml:para></maml:para>
</dev:remarks>
</command:example>
<command:example>
<maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
<dev:code># Synopsis: Complex task with parameters as a hashtable.
task TestAndAnalyse @{
    If = !$SkipAnalyse
    Inputs = {
        Get-ChildItem . -Recurse -Include *.ps1, *.psm1
    }
    Outputs = {
        &apos;Analyser.log&apos;
    }
    Jobs = &apos;Test&apos;, {
        Invoke-ScriptAnalyzer . &gt; Analyser.log
    }
}

# Synopsis: Simple task with usual parameters.
task Test -If (!$SkipTest) {
    Invoke-Pester
}</dev:code>
<dev:remarks>
<maml:para>Tasks with complex parameters are often difficult to compose in a readable
way. In such cases use a hashtable in order to specify task parameters in
addition to the task name. Keys and values correspond to parameter names
and values.</maml:para>
</dev:remarks>
</command:example>
</command:examples>
<maml:relatedLinks>
<maml:navigationLink>
<maml:linkText>Get-BuildError</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>Get-BuildSynopsis</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:uri>https://github.com/nightroman/Invoke-Build/wiki</maml:uri>
</maml:navigationLink>
</maml:relatedLinks>
</command:command>
<command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">
<command:details>
<command:name>Get-BuildError</command:name>
<maml:description>
<maml:para>Gets the specified task error.</maml:para>
</maml:description>
<command:verb>Get</command:verb>
<command:noun>BuildError</command:noun>
</command:details>
<maml:description>
<maml:para>The specified task is usually safe referenced in the build (?name) and a
caller (usually a downstream task) gets its potential error for analysis.</maml:para>
</maml:description>
<command:syntax>
<command:syntaxItem>
<maml:name>Get-BuildError</maml:name>
<command:parameter required="true" position="0" >
<maml:name>Task</maml:name>
<command:parameterValue required="true">String</command:parameterValue>
</command:parameter>
</command:syntaxItem>
</command:syntax>
<command:parameters>
<command:parameter required="true" position="0" >
<maml:name>Task</maml:name>
<maml:description>
<maml:para>Name of the task which error is requested.</maml:para>
</maml:description>
</command:parameter>
</command:parameters>
<command:returnValues>
<command:returnValue>
<dev:type>
<maml:name>Error</maml:name>
</dev:type>
<maml:description>
<maml:para>An error or null if the task has not failed.</maml:para>
</maml:description>
</command:returnValue>
</command:returnValues>
<maml:relatedLinks>
<maml:navigationLink>
<maml:linkText>Add-BuildTask</maml:linkText>
</maml:navigationLink>
</maml:relatedLinks>
</command:command>
<command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">
<command:details>
<command:name>Assert-Build</command:name>
<maml:description>
<maml:para>(assert) Checks for a condition.</maml:para>
</maml:description>
<command:verb>Assert</command:verb>
<command:noun>Build</command:noun>
</command:details>
<maml:description>
<maml:para>Scripts use its alias &apos;assert&apos;. This command checks for a condition and
if it is not true throws an error with the default or specified message.</maml:para>
</maml:description>
<command:syntax>
<command:syntaxItem>
<maml:name>Assert-Build</maml:name>
<command:parameter required="false" position="0" >
<maml:name>Condition</maml:name>
<command:parameterValue required="true">Object</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="1" >
<maml:name>Message</maml:name>
<command:parameterValue required="true">String</command:parameterValue>
</command:parameter>
</command:syntaxItem>
</command:syntax>
<command:parameters>
<command:parameter required="false" position="0" >
<maml:name>Condition</maml:name>
<maml:description>
<maml:para>The condition.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="1" >
<maml:name>Message</maml:name>
<maml:description>
<maml:para>An optional message describing the assertion condition.</maml:para>
</maml:description>
</command:parameter>
</command:parameters>
<maml:relatedLinks>
<maml:navigationLink>
<maml:linkText>Assert-BuildEquals</maml:linkText>
</maml:navigationLink>
</maml:relatedLinks>
</command:command>
<command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">
<command:details>
<command:name>Assert-BuildEquals</command:name>
<maml:description>
<maml:para>(equals) Verifies that two specified objects are equal.</maml:para>
</maml:description>
<command:verb>Assert</command:verb>
<command:noun>BuildEquals</command:noun>
</command:details>
<maml:description>
<maml:para>Scripts use its alias &apos;equals&apos;. This command verifies that two specified
objects are equal using [Object]::Equals(). If objects are not equal the
command fails with a message showing object values and types.</maml:para>
</maml:description>
<command:syntax>
<command:syntaxItem>
<maml:name>Assert-BuildEquals</maml:name>
<command:parameter required="false" position="0" >
<maml:name>A</maml:name>
<command:parameterValue required="true">Object</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="1" >
<maml:name>B</maml:name>
<command:parameterValue required="true">Object</command:parameterValue>
</command:parameter>
</command:syntaxItem>
</command:syntax>
<command:parameters>
<command:parameter required="false" position="0" >
<maml:name>A</maml:name>
<maml:description>
<maml:para>The first object.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="1" >
<maml:name>B</maml:name>
<maml:description>
<maml:para>The second object.</maml:para>
</maml:description>
</command:parameter>
</command:parameters>
<maml:relatedLinks>
<maml:navigationLink>
<maml:linkText>Assert-Build</maml:linkText>
</maml:navigationLink>
</maml:relatedLinks>
</command:command>
<command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">
<command:details>
<command:name>Get-BuildProperty</command:name>
<maml:description>
<maml:para>(property) Gets the session or environment variable or the default.</maml:para>
</maml:description>
<command:verb>Get</command:verb>
<command:noun>BuildProperty</command:noun>
</command:details>
<maml:description>
<maml:para>Scripts use its alias &apos;property&apos;. The command returns:

    - session variable value if it is not $null or &apos;&apos;
    - environment variable if it is not $null or &apos;&apos;
    - default value if it is not $null
    - error</maml:para>
</maml:description>
<command:syntax>
<command:syntaxItem>
<maml:name>Get-BuildProperty</maml:name>
<command:parameter required="true" position="0" >
<maml:name>Name</maml:name>
<command:parameterValue required="true">String</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="1" >
<maml:name>Value</maml:name>
<command:parameterValue required="true">Object</command:parameterValue>
</command:parameter>
</command:syntaxItem>
</command:syntax>
<command:parameters>
<command:parameter required="true" position="0" >
<maml:name>Name</maml:name>
<maml:description>
<maml:para>Specifies the session or environment variable name.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="1" >
<maml:name>Value</maml:name>
<maml:description>
<maml:para>Specifies the default value. If it is omitted or null then the variable
must exist with a not empty value. Otherwise an error is thrown.</maml:para>
</maml:description>
</command:parameter>
</command:parameters>
<command:returnValues>
<command:returnValue>
<dev:type>
<maml:name>Object</maml:name>
</dev:type>
<maml:description>
<maml:para>Requested property value.</maml:para>
</maml:description>
</command:returnValue>
</command:returnValues>
<command:examples>
<command:example>
<maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
<dev:code># Inherit an existing value or throw an error

$OutputPath = property OutputPath</dev:code>
</command:example>
<command:example>
<maml:title>-------------------------- EXAMPLE 2 --------------------------</maml:title>
<dev:code># Get an existing value or use the default

$WarningLevel = property WarningLevel 4</dev:code>
</command:example>
</command:examples>
<maml:relatedLinks>
<maml:navigationLink>
<maml:linkText>Test-BuildAsset</maml:linkText>
</maml:navigationLink>
</maml:relatedLinks>
</command:command>
<command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">
<command:details>
<command:name>Get-BuildSynopsis</command:name>
<maml:description>
<maml:para>Gets the task synopsis.</maml:para>
</maml:description>
<command:verb>Get</command:verb>
<command:noun>BuildSynopsis</command:noun>
</command:details>
<maml:description>
<maml:para>Gets the specified task synopsis if it is available.

Task synopses are defined in preceding comments as

    # Synopsis: ...

or

    &lt;#
    .Synopsis
    ...
    #&gt;

This function may be used in Set-BuildHeader for printing task synopses.</maml:para>
</maml:description>
<command:syntax>
<command:syntaxItem>
<maml:name>Get-BuildSynopsis</maml:name>
<command:parameter required="true" position="0" >
<maml:name>Task</maml:name>
<command:parameterValue required="true">Object</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="1" >
<maml:name>Hash</maml:name>
<command:parameterValue required="true">Object</command:parameterValue>
</command:parameter>
</command:syntaxItem>
</command:syntax>
<command:parameters>
<command:parameter required="true" position="0" >
<maml:name>Task</maml:name>
<maml:description>
<maml:para>The task object. During the build, the current task is available as the
automatic variable $Task.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="1" >
<maml:name>Hash</maml:name>
<maml:description>
<maml:para>A hashtable for caching. Build scripts do not have to specify it, the
internal cache is used by default. It is designed for external tools.</maml:para>
</maml:description>
</command:parameter>
</command:parameters>
<command:returnValues>
<command:returnValue>
<dev:type>
<maml:name>String</maml:name>
</dev:type>
</command:returnValue>
</command:returnValues>
<command:examples>
<command:example>
<maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
<dev:code># Headers: print task paths as usual and synopses in addition
Set-BuildHeader {
    param($Path)
    Write-Build Cyan &quot;Task $Path : $(Get-BuildSynopsis $Task)&quot;
}

# Synopsis: This task prints its own synopsis.
task Task1 {
    &apos;My synopsis : &apos; + (Get-BuildSynopsis $Task)
}</dev:code>
</command:example>
</command:examples>
<maml:relatedLinks>
<maml:navigationLink>
<maml:linkText>Set-BuildFooter</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>Set-BuildHeader</maml:linkText>
</maml:navigationLink>
</maml:relatedLinks>
</command:command>
<command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">
<command:details>
<command:name>Invoke-BuildExec</command:name>
<maml:description>
<maml:para>(exec) Invokes an application and checks $LastExitCode.</maml:para>
</maml:description>
<command:verb>Invoke</command:verb>
<command:noun>BuildExec</command:noun>
</command:details>
<maml:description>
<maml:para>Scripts use its alias &apos;exec&apos;. It invokes the specified script block which
is supposed to call an executable. Then $LastExitCode is checked. If it
does not fit to the specified values (0 by default) an error is thrown.

If you have any issues with standard error output of the invoked app, try
using `exec` with -ErrorAction Continue, SilentlyContinue, or Ignore. This
does not affect failures of `exec`, they still depend on the app exit code.
But this may work around some known PowerShell issues with standard errors.</maml:para>
</maml:description>
<command:syntax>
<command:syntaxItem>
<maml:name>Invoke-BuildExec</maml:name>
<command:parameter required="true" position="0" >
<maml:name>Command</maml:name>
<command:parameterValue required="true">ScriptBlock</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="1" >
<maml:name>ExitCode</maml:name>
<command:parameterValue required="true">Int32[]</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="2" >
<maml:name>ErrorMessage</maml:name>
<command:parameterValue required="true">String</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Echo</maml:name>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>StdErr</maml:name>
</command:parameter>
</command:syntaxItem>
</command:syntax>
<command:parameters>
<command:parameter required="true" position="0" >
<maml:name>Command</maml:name>
<maml:description>
<maml:para>Command that invokes an executable which exit code is checked. It must
invoke an application directly (.exe) or not (.cmd, .bat), otherwise
$LastExitCode is not set and may contain the code of another command.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="1" >
<maml:name>ExitCode</maml:name>
<maml:description>
<maml:para>Valid exit codes (e.g. 0..3 for robocopy).</maml:para>
</maml:description>
<dev:defaultValue>@(0)</dev:defaultValue>
</command:parameter>
<command:parameter required="false" position="2" >
<maml:name>ErrorMessage</maml:name>
<maml:description>
<maml:para>Specifies the text included to standard error messages.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Echo</maml:name>
<maml:description>
<maml:para>Tells to write the command and its used variable values.
WARNING: With echo you may expose sensitive information.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>StdErr</maml:name>
<maml:description>
<maml:para>Tells to set $ErrorActionPreference to Continue, capture all output and
write as strings. Then, if the exit code is failure, add the standard
error output text to the error message.</maml:para>
</maml:description>
</command:parameter>
</command:parameters>
<command:returnValues>
<command:returnValue>
<dev:type>
<maml:name>Objects</maml:name>
</dev:type>
<maml:description>
<maml:para>Output of the specified command.</maml:para>
</maml:description>
</command:returnValue>
</command:returnValues>
<command:examples>
<command:example>
<maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
<dev:code># Call robocopy (0..3 are valid exit codes)

exec { robocopy Source Target /mir } (0..3)</dev:code>
</command:example>
</command:examples>
<maml:relatedLinks>
<maml:navigationLink>
<maml:linkText>Use-BuildAlias</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>Use-BuildEnv</maml:linkText>
</maml:navigationLink>
</maml:relatedLinks>
</command:command>
<command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">
<command:details>
<command:name>Remove-BuildItem</command:name>
<maml:description>
<maml:para>(remove) Removes specified items.</maml:para>
</maml:description>
<command:verb>Remove</command:verb>
<command:noun>BuildItem</command:noun>
</command:details>
<maml:description>
<maml:para>Scripts use its alias &apos;remove&apos;. This command removes existing items,
ignores missing items, and fails if it cannot remove existing items.

Use the switch Verbose in order to output messages about removing
existing and skipping missing items or patterns specified by Path.</maml:para>
</maml:description>
<command:syntax>
<command:syntaxItem>
<maml:name>Remove-BuildItem</maml:name>
<command:parameter required="true" position="0" >
<maml:name>Path</maml:name>
<command:parameterValue required="true">String[]</command:parameterValue>
</command:parameter>
</command:syntaxItem>
</command:syntax>
<command:parameters>
<command:parameter required="true" position="0" globbing="true" >
<maml:name>Path</maml:name>
<maml:description>
<maml:para>Specifies the items to be removed. Wildcards are allowed.
The parameter is mostly the same as Path of Remove-Item.
For sanity, paths with only ., *, \, / are not allowed.</maml:para>
</maml:description>
</command:parameter>
</command:parameters>
<command:examples>
<command:example>
<maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
<dev:code># Remove some temporary items

remove bin, obj, *.test.log</dev:code>
</command:example>
</command:examples>
</command:command>
<command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">
<command:details>
<command:name>Set-BuildFooter</command:name>
<maml:description>
<maml:para>Tells how to write task footers.</maml:para>
</maml:description>
<command:verb>Set</command:verb>
<command:noun>BuildFooter</command:noun>
</command:details>
<maml:description>
<maml:para>This build block is used in order to change the default task footer format.
Use the automatic variable $Task in order to get the current task data.
Use Write-Build in order to write with colors.</maml:para>
</maml:description>
<command:syntax>
<command:syntaxItem>
<maml:name>Set-BuildFooter</maml:name>
<command:parameter required="false" position="0" >
<maml:name>Script</maml:name>
<command:parameterValue required="true">ScriptBlock</command:parameterValue>
</command:parameter>
</command:syntaxItem>
</command:syntax>
<command:parameters>
<command:parameter required="false" position="0" >
<maml:name>Script</maml:name>
<maml:description>
<maml:para>The script like {param($Path) ...} which is used in order to write task
footers. The parameter Path includes the parent and current task names.

In order to omit task footers, set an empty block:

    Set-BuildFooter {}</maml:para>
</maml:description>
</command:parameter>
</command:parameters>
<command:examples>
<command:example>
<maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
<dev:code># Use the usual footer format but change the color
Set-BuildFooter {
    param($Path)
    Write-Build DarkGray &quot;Done $Path $($Task.Elapsed)&quot;
}

# Synopsis: Data for footers in addition to $Path and $Task.Elapsed
task Task1 {
    &apos;Task name     : &apos; + $Task.Name
    &apos;Start time    : &apos; + $Task.Started
    &apos;Location path : &apos; + $Task.InvocationInfo.ScriptName
    &apos;Location line : &apos; + $Task.InvocationInfo.ScriptLineNumber
}</dev:code>
</command:example>
</command:examples>
<maml:relatedLinks>
<maml:navigationLink>
<maml:linkText>Get-BuildSynopsis</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>Set-BuildHeader</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>Write-Build</maml:linkText>
</maml:navigationLink>
</maml:relatedLinks>
</command:command>
<command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">
<command:details>
<command:name>Set-BuildHeader</command:name>
<maml:description>
<maml:para>Tells how to write task headers.</maml:para>
</maml:description>
<command:verb>Set</command:verb>
<command:noun>BuildHeader</command:noun>
</command:details>
<maml:description>
<maml:para>This build block is used in order to change the default task header format.
Use the automatic variable $Task in order to get the current task data.
Use Write-Build in order to write with colors.</maml:para>
</maml:description>
<command:syntax>
<command:syntaxItem>
<maml:name>Set-BuildHeader</maml:name>
<command:parameter required="false" position="0" >
<maml:name>Script</maml:name>
<command:parameterValue required="true">ScriptBlock</command:parameterValue>
</command:parameter>
</command:syntaxItem>
</command:syntax>
<command:parameters>
<command:parameter required="false" position="0" >
<maml:name>Script</maml:name>
<maml:description>
<maml:para>The script like {param($Path) ...} which is used in order to write task
headers. The parameter Path includes the parent and current task names.</maml:para>
</maml:description>
</command:parameter>
</command:parameters>
<command:examples>
<command:example>
<maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
<dev:code># Headers: write task paths as usual and synopses in addition
Set-BuildHeader {
    param($Path)
    Write-Build Cyan &quot;Task $Path --- $(Get-BuildSynopsis $Task)&quot;
}

# Synopsis: Data for headers in addition to $Path and Get-BuildSynopsis
task Task1 {
    &apos;Task name     : &apos; + $Task.Name
    &apos;Start time    : &apos; + $Task.Started
    &apos;Location path : &apos; + $Task.InvocationInfo.ScriptName
    &apos;Location line : &apos; + $Task.InvocationInfo.ScriptLineNumber
}</dev:code>
</command:example>
</command:examples>
<maml:relatedLinks>
<maml:navigationLink>
<maml:linkText>Get-BuildSynopsis</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>Set-BuildFooter</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>Write-Build</maml:linkText>
</maml:navigationLink>
</maml:relatedLinks>
</command:command>
<command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">
<command:details>
<command:name>Test-BuildAsset</command:name>
<maml:description>
<maml:para>(requires) Checks for required build assets.</maml:para>
</maml:description>
<command:verb>Test</command:verb>
<command:noun>BuildAsset</command:noun>
</command:details>
<maml:description>
<maml:para>Scripts use its alias &apos;requires&apos;. This command tests the specified assets.
It fails if any is missing. It is used in script code (common assets) and
in tasks (individual assets).</maml:para>
</maml:description>
<command:syntax>
<command:syntaxItem>
<maml:name>Test-BuildAsset</maml:name>
<command:parameter required="false" position="0" >
<maml:name>Variable</maml:name>
<command:parameterValue required="true">String[]</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Environment</maml:name>
<command:parameterValue required="true">String[]</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Path</maml:name>
<command:parameterValue required="true">String[]</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Property</maml:name>
<command:parameterValue required="true">String[]</command:parameterValue>
</command:parameter>
</command:syntaxItem>
</command:syntax>
<command:parameters>
<command:parameter required="false" position="0" >
<maml:name>Variable</maml:name>
<maml:description>
<maml:para>Specifies the required session variable names and tells to fail if a
variable is missing or its value is null or empty string.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Environment</maml:name>
<maml:description>
<maml:para>Specifies the required environment variable names.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Path</maml:name>
<maml:description>
<maml:para>Specifies literal paths to be tested by Test-Path. If the specified
expression uses required assets then test these assets first by a
separate command.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Property</maml:name>
<maml:description>
<maml:para>Specifies session or environment variable names and tells to fail if a
variable is missing or its value is null or empty string.</maml:para>
</maml:description>
</command:parameter>
</command:parameters>
<maml:relatedLinks>
<maml:navigationLink>
<maml:linkText>Get-BuildProperty</maml:linkText>
</maml:navigationLink>
</maml:relatedLinks>
</command:command>
<command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">
<command:details>
<command:name>Use-BuildAlias</command:name>
<maml:description>
<maml:para>(use) Sets framework or directory tool aliases.</maml:para>
</maml:description>
<command:verb>Use</command:verb>
<command:noun>BuildAlias</command:noun>
</command:details>
<maml:description>
<maml:para>Scripts use its alias &apos;use&apos;. Invoke-Build does not change the system path
in order to make framework tools available by names. This is not suitable
for using mixed framework tools (in different tasks, scripts, parallel
builds). Instead, this function is used for setting tool aliases in the
scope where it is called.

This command may be used in the script scope to make aliases for all tasks.
But it can be called from tasks in order to use more task specific tools.</maml:para>
</maml:description>
<command:syntax>
<command:syntaxItem>
<maml:name>Use-BuildAlias</maml:name>
<command:parameter required="true" position="0" >
<maml:name>Path</maml:name>
<command:parameterValue required="true">String</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="1" >
<maml:name>Name</maml:name>
<command:parameterValue required="true">String[]</command:parameterValue>
</command:parameter>
</command:syntaxItem>
</command:syntax>
<command:parameters>
<command:parameter required="true" position="0" >
<maml:name>Path</maml:name>
<maml:description>
<maml:para>Specifies the tools directory.

If it is * or it starts with digits followed by a dot then the MSBuild
path is resolved using the package script Resolve-MSBuild.ps1. Build
scripts may invoke it directly by the provided alias Resolve-MSBuild.
The optional suffix x86 tells to use 32-bit MSBuild.

    For just MSBuild use Resolve-MSBuild instead:

        Set-Alias MSBuild (Resolve-MSBuild ...)
        MSBuild ...

    or

        $MSBuild = Resolve-MSBuild ...
        &amp; $MSBuild ...

If it is like Framework* then it is assumed to be a path relative to
Microsoft.NET in the Windows directory.

Otherwise it is a full or relative literal path of any directory.

Examples: *, 4.0, Framework\v4.0.30319, .\Tools</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="1" >
<maml:name>Name</maml:name>
<maml:description>
<maml:para>Specifies the tool names. They become aliases in the current scope.
If it is a build script then the aliases are created for all tasks.
If it is a task then the aliases are available just for this task.</maml:para>
</maml:description>
</command:parameter>
</command:parameters>
<command:examples>
<command:example>
<maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
<dev:code># Use .NET 4.0 tools MSBuild, csc, ngen. Then call MSBuild.

use 4.0 MSBuild, csc, ngen
exec { MSBuild Some.csproj /t:Build /p:Configuration=Release }</dev:code>
</command:example>
</command:examples>
<maml:relatedLinks>
<maml:navigationLink>
<maml:linkText>Invoke-BuildExec</maml:linkText>
</maml:navigationLink>
<maml:navigationLink>
<maml:linkText>Resolve-MSBuild</maml:linkText>
</maml:navigationLink>
</maml:relatedLinks>
</command:command>
<command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">
<command:details>
<command:name>Confirm-Build</command:name>
<maml:description>
<maml:para>Prompts to confirm an operation.</maml:para>
</maml:description>
<command:verb>Confirm</command:verb>
<command:noun>Build</command:noun>
</command:details>
<maml:description>
<maml:para>This function prints the prompt and options: [Y] Yes [N] No [S] Suspend.
Choose Y to continue or N to skip. [S] enters the nested prompt, you may
invoke some commands end then `exit`.

Confirm-Build must not be called during non interactive builds. Scripts
should take care of this. For example, add the switch $Quiet and define
Confirm-Build as &quot;Yes to All&quot;:

    if ($Quiet) {function Confirm-Build {$true}}</maml:para>
</maml:description>
<command:syntax>
<command:syntaxItem>
<maml:name>Confirm-Build</maml:name>
<command:parameter required="false" position="0" >
<maml:name>Query</maml:name>
<command:parameterValue required="true">String</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="1" >
<maml:name>Caption</maml:name>
<command:parameterValue required="true">String</command:parameterValue>
</command:parameter>
</command:syntaxItem>
</command:syntax>
<command:parameters>
<command:parameter required="false" position="0" >
<maml:name>Query</maml:name>
<maml:description>
<maml:para>The confirmation query. If it is omitted or empty, &quot;Continue with this operation?&quot; is used.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="1" >
<maml:name>Caption</maml:name>
<maml:description>
<maml:para>The confirmation caption. If it is omitted, the current task or script name is used.</maml:para>
</maml:description>
</command:parameter>
</command:parameters>
<command:returnValues>
<command:returnValue>
<dev:type>
<maml:name>Boolean</maml:name>
</dev:type>
</command:returnValue>
</command:returnValues>
</command:command>
<command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">
<command:details>
<command:name>Write-Build</command:name>
<maml:description>
<maml:para>Writes text using colors if they are supported.</maml:para>
</maml:description>
<command:verb>Write</command:verb>
<command:noun>Build</command:noun>
</command:details>
<maml:description>
<maml:para>This function is used in order to output colored text in a console or other
hosts with colors. Unlike Write-Host it is suitable for redirected output.

Write-Build is designed for tasks and build blocks, not script functions.

With PowerShell 7.2+ and $PSStyle.OutputRendering ANSI, Write-Build uses
ANSI escape sequences.</maml:para>
</maml:description>
<command:syntax>
<command:syntaxItem>
<maml:name>Write-Build</maml:name>
<command:parameter required="true" position="0" >
<maml:name>Color</maml:name>
<command:parameterValue required="true">ConsoleColor</command:parameterValue>
</command:parameter>
<command:parameter required="true" position="1" >
<maml:name>Text</maml:name>
<command:parameterValue required="true">String</command:parameterValue>
</command:parameter>
</command:syntaxItem>
</command:syntax>
<command:parameters>
<command:parameter required="true" position="0" >
<maml:name>Color</maml:name>
<maml:description>
<maml:para>[System.ConsoleColor] value or its string representation.</maml:para>
<maml:para>Values : Black, DarkBlue, DarkGreen, DarkCyan, DarkRed, DarkMagenta, DarkYellow, Gray, DarkGray, Blue, Green, Cyan, Red, Magenta, Yellow, White</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="true" position="1" >
<maml:name>Text</maml:name>
<maml:description>
<maml:para>Text written using colors if they are supported.</maml:para>
</maml:description>
</command:parameter>
</command:parameters>
<command:returnValues>
<command:returnValue>
<dev:type>
<maml:name>String</maml:name>
</dev:type>
</command:returnValue>
</command:returnValues>
</command:command>
<command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">
<command:details>
<command:name>Use-BuildEnv</command:name>
<maml:description>
<maml:para>Invokes script with temporary changed environment variables.</maml:para>
</maml:description>
<command:verb>Use</command:verb>
<command:noun>BuildEnv</command:noun>
</command:details>
<maml:description>
<maml:para>This command sets the specified environment variables and invokes the
script. Then it restores the original values of specified variables.</maml:para>
</maml:description>
<command:syntax>
<command:syntaxItem>
<maml:name>Use-BuildEnv</maml:name>
<command:parameter required="true" position="0" >
<maml:name>Env</maml:name>
<command:parameterValue required="true">Hashtable</command:parameterValue>
</command:parameter>
<command:parameter required="true" position="1" >
<maml:name>Script</maml:name>
<command:parameterValue required="true">ScriptBlock</command:parameterValue>
</command:parameter>
</command:syntaxItem>
</command:syntax>
<command:parameters>
<command:parameter required="true" position="0" >
<maml:name>Env</maml:name>
<maml:description>
<maml:para>The hashtable of environment variables used by the script.
Keys and values correspond to variable names and values.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="true" position="1" >
<maml:name>Script</maml:name>
<maml:description>
<maml:para>The script invoked with the specified variables.</maml:para>
</maml:description>
</command:parameter>
</command:parameters>
<command:returnValues>
<command:returnValue>
<dev:type>
<maml:name>Objects</maml:name>
</dev:type>
<maml:description>
<maml:para>Output of the specified script.</maml:para>
</maml:description>
</command:returnValue>
</command:returnValues>
<command:examples>
<command:example>
<maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
<dev:code># Invoke with temporary changed Port and Path
Use-BuildEnv @{
    Port = &apos;9780&apos;
    Path = &quot;$PSScriptRoot\Scripts;$env:Path&quot;
} {
    exec { dotnet test }
}</dev:code>
</command:example>
</command:examples>
<maml:relatedLinks>
<maml:navigationLink>
<maml:linkText>Invoke-BuildExec</maml:linkText>
</maml:navigationLink>
</maml:relatedLinks>
</command:command>
<command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">
<command:details>
<command:name>Build-Parallel.ps1</command:name>
<maml:description>
<maml:para>Invokes parallel builds by Invoke-Build</maml:para>
</maml:description>
</command:details>
<maml:description>
<maml:para>This script invokes several build scripts simultaneously by Invoke-Build.
Number of parallel builds is set to the number of processors by default.

NOTE: Avoid using Build-Parallel in scenarios with PowerShell classes.
Known issues: https://github.com/nightroman/Invoke-Build/issues/180

VERBOSE STREAM

Verbose messages are propagated to the caller if Verbose is set to true in
build parameters. They are written all together before the build output.

    Build-Parallel @(
        @{File=...; Task=...; Verbose=$true}
        ...
    )

INFORMATION STREAM

Information messages are propagated to the caller if InformationAction is
set to Continue in build parameters. They are written all together before
the build output.

    Build-Parallel @(
        @{File=...; Task=...; InformationAction=&apos;Continue&apos;}
        ...
    )

In addition or instead, information messages are collected in the variable
specified by InformationVariable in build parameters.

    Build-Parallel @(
        @{File=...; Task=...; InformationVariable=&apos;info&apos;}
        ...
    )

    # information messages
    $info</maml:para>
</maml:description>
<command:syntax>
<command:syntaxItem>
<maml:name>Build-Parallel.ps1</maml:name>
<command:parameter required="false" position="0" >
<maml:name>Build</maml:name>
<command:parameterValue required="true">Hashtable[]</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>MaximumBuilds</maml:name>
<command:parameterValue required="true">Int32</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Result</maml:name>
<command:parameterValue required="true">Object</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>ShowParameter</maml:name>
<command:parameterValue required="true">String[]</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Timeout</maml:name>
<command:parameterValue required="true">Int32</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>FailHard</maml:name>
</command:parameter>
</command:syntaxItem>
</command:syntax>
<command:parameters>
<command:parameter required="false" position="0" >
<maml:name>Build</maml:name>
<maml:description>
<maml:para>Build parameters defined as hashtables with these keys/data:

    Task, File, ... - Invoke-Build.ps1 and script parameters
    Log - Tells to write build output to the specified file

Any number of builds is allowed, including 0 and 1. The maximum number
of parallel builds is the number of processors by default. It can be
changed by the parameter MaximumBuilds.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>FailHard</maml:name>
<maml:description>
<maml:para>Tells to abort all builds if any build fails.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>MaximumBuilds</maml:name>
<maml:description>
<maml:para>Maximum number of builds invoked at the same time.</maml:para>
</maml:description>
<dev:defaultValue>Number of processors.</dev:defaultValue>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Result</maml:name>
<maml:description>
<maml:para>Tells to output build results using a variable. It is either a name of
variable to be created for results or any object with the property
Value to be assigned ([ref], [hashtable]).

Result properties:

    Tasks - tasks (*)
    Errors - errors (*)
    Warnings - warnings (*)
    Started - start time
    Elapsed - build duration

(*) see: help Invoke-Build -Parameter Result</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>ShowParameter</maml:name>
<maml:description>
<maml:para>Tells to show the specified parameter values in build titles.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Timeout</maml:name>
<maml:description>
<maml:para>Maximum overall build time in milliseconds.</maml:para>
</maml:description>
</command:parameter>
</command:parameters>
<command:returnValues>
<command:returnValue>
<dev:type>
<maml:name>Text</maml:name>
</dev:type>
<maml:description>
<maml:para>Output of invoked builds and other log messages.</maml:para>
</maml:description>
</command:returnValue>
</command:returnValues>
<command:examples>
<command:example>
<maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
<dev:code>Build-Parallel @(
    @{File=&apos;Project1.build.ps1&apos;}
    @{File=&apos;Project2.build.ps1&apos;; Task=&apos;MakeHelp&apos;}
    @{File=&apos;Project2.build.ps1&apos;; Task=&apos;Build&apos;, &apos;Test&apos;}
    @{File=&apos;Project3.build.ps1&apos;; Log=&apos;C:\TEMP\Project3.log&apos;}
    @{File=&apos;Project4.build.ps1&apos;; Configuration=&apos;Release&apos;}
)</dev:code>
<dev:remarks>
<maml:para>Five parallel builds are invoked with various combinations of parameters.
Note that it is fine to invoke the same build script more than once if
build flows specified by different tasks do not conflict.</maml:para>
</dev:remarks>
</command:example>
</command:examples>
<maml:relatedLinks>
<maml:navigationLink>
<maml:linkText>Invoke-Build</maml:linkText>
</maml:navigationLink>
</maml:relatedLinks>
</command:command>
<command:command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">
<command:details>
<command:name>Build-Checkpoint.ps1</command:name>
<maml:description>
<maml:para>Invokes persistent builds with checkpoints.</maml:para>
</maml:description>
</command:details>
<maml:description>
<maml:para>This command invokes the build and saves build state checkpoints after each
completed task. If the build is interrupted then it may be resumed later
with the saved checkpoint file.

The built-in Export-Clixml and Import-Clixml are used for saving checkpoints.
Keep in mind that not all data types are suitable for this serialization.

CUSTOM EXPORT AND IMPORT

By default, the command saves and restores build tasks, script path, and
all parameters declared by the build script. Tip: consider declaring some
script variables as artificial parameters in order to make them persistent.

If this is not enough for saving and restoring the build state then use
custom export and import blocks. The export block is called on writing
checkpoints, i.e. on each task. The import block is called on resuming
once, before the task to be resumed.

The export block is set by `Set-BuildData Checkpoint.Export`, e.g.

    Set-BuildData Checkpoint.Export {
        $script:var1
        $script:var2
    }

The import block is set by `Set-BuildData Checkpoint.Import`, e.g.

    Set-BuildData Checkpoint.Import {
        param($data)
        $var1, $var2 = $data
    }

The import block is called in the script scope. Thus, $var1 and $var2 are
script variables right away. We may but do not have to use the prefix.

The parameter $data is the output of Checkpoint.Export exported to clixml
and then imported from clixml.</maml:para>
</maml:description>
<command:syntax>
<command:syntaxItem>
<maml:name>Build-Checkpoint.ps1</maml:name>
<command:parameter required="true" position="0" >
<maml:name>Checkpoint</maml:name>
<command:parameterValue required="true">String</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="1" >
<maml:name>Build</maml:name>
<command:parameterValue required="true">Hashtable</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Preserve</maml:name>
</command:parameter>
</command:syntaxItem>
<command:syntaxItem>
<maml:name>Build-Checkpoint.ps1</maml:name>
<command:parameter required="true" position="0" >
<maml:name>Checkpoint</maml:name>
<command:parameterValue required="true">String</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="1" >
<maml:name>Build</maml:name>
<command:parameterValue required="true">Hashtable</command:parameterValue>
</command:parameter>
<command:parameter required="true" position="named" >
<maml:name>Auto</maml:name>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Preserve</maml:name>
</command:parameter>
</command:syntaxItem>
<command:syntaxItem>
<maml:name>Build-Checkpoint.ps1</maml:name>
<command:parameter required="true" position="0" >
<maml:name>Checkpoint</maml:name>
<command:parameterValue required="true">String</command:parameterValue>
</command:parameter>
<command:parameter required="false" position="1" >
<maml:name>Build</maml:name>
<command:parameterValue required="true">Hashtable</command:parameterValue>
</command:parameter>
<command:parameter required="true" position="named" >
<maml:name>Resume</maml:name>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Preserve</maml:name>
</command:parameter>
</command:syntaxItem>
</command:syntax>
<command:parameters>
<command:parameter required="true" position="0" >
<maml:name>Checkpoint</maml:name>
<maml:description>
<maml:para>Specifies the checkpoint file (clixml). The checkpoint file is removed
after successful builds unless the switch Preserve is specified.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="1" >
<maml:name>Build</maml:name>
<maml:description>
<maml:para>Specifies the build and script parameters. WhatIf is not supported.

When the build resumes by Resume or Auto then fields Task, File, and
script parameters are ignored and restored from the checkpoint file.
But fields Result, Safe, Summary are used as usual build parameters.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="true" position="named" >
<maml:name>Auto</maml:name>
<maml:description>
<maml:para>Tells to start a new build if the checkpoint file is not found or
resume the build from the found checkpoint file.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="false" position="named" >
<maml:name>Preserve</maml:name>
<maml:description>
<maml:para>Tells to preserve the checkpoint file on successful builds.</maml:para>
</maml:description>
</command:parameter>
<command:parameter required="true" position="named" >
<maml:name>Resume</maml:name>
<maml:description>
<maml:para>Tells to resume the build from the existing checkpoint file.</maml:para>
</maml:description>
</command:parameter>
</command:parameters>
<command:returnValues>
<command:returnValue>
<dev:type>
<maml:name>Text</maml:name>
</dev:type>
<maml:description>
<maml:para>Output of the invoked build.</maml:para>
</maml:description>
</command:returnValue>
</command:returnValues>
<command:examples>
<command:example>
<maml:title>-------------------------- EXAMPLE 1 --------------------------</maml:title>
<dev:code># Invoke a persistent sequence of steps defined as tasks.
Build-Checkpoint temp.clixml @{Task = &apos;*&apos;; File = &apos;Steps.build.ps1&apos;}

# Given the above failed, resume at the failed step.
Build-Checkpoint temp.clixml -Resume</dev:code>
</command:example>
</command:examples>
<maml:relatedLinks>
<maml:navigationLink>
<maml:linkText>Invoke-Build</maml:linkText>
</maml:navigationLink>
</maml:relatedLinks>
</command:command>
</helpItems>