Step 1: Review Your Packages

Step 2: Choose Your Integration Method

Step 3: Copy Your Script or Download Config

Option 1: Copy Script

Option 2: Download Config

Step 4: Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the packages and push them to a repository
  Download Packages

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the packages:
  Download Packages
- Follow manual internalization instructions
Package Internalizer (C4B)
- Run: (additional options)
- For package and dependencies run:
- Automate package internalization

Step 5: Copy Your Script

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###

#### We initialize a few things that are needed by this script - there are no other requirements.
$ErrorActionPreference = "Stop"

#### Set TLS 1.2 (3072) as that is the minimum required by various up-to-date repositories.
#### Use integers because the enumeration value for TLS 1.2 won't exist
#### in .NET 4.0, even though they are addressable if .NET 4.5+ is
#### installed (.NET 4.5 is an in-place upgrade).
[System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072

#### We use this variable for future REST calls.
$RequestArguments = @{
    UseBasicParsing = $true
}

## 2. TOP LEVEL VARIABLES ##

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# $NugetRepositoryCredential = [PSCredential]::new(
#     "username",
#     ("password" | ConvertTo-SecureString -AsPlainText -Force)
# )
# $RequestArguments.Credential = $NugetRepositoryCredential

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it
$ChocolateyDownloadUrl = "$($NugetRepositoryUrl.TrimEnd('/'))/package/chocolatey.2.4.0.nupkg"

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# $ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

#### Download the Nupkg, appending .zip to the filename to handle archive cmdlet limitations
if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    $TempDirectory = Join-Path $env:Temp "chocolateyInstall"
    if (-not (Test-Path $TempDirectory -PathType Container)) {
        $null = New-Item -Path $TempDirectory -ItemType Directory
    }
    $DownloadedNupkg = Join-Path $TempDirectory "$(Split-Path $ChocolateyDownloadUrl -Leaf).zip"
    Invoke-WebRequest -Uri $ChocolateyDownloadUrl -OutFile $DownloadedNupkg @RequestArguments

    #### Extract the Nupkg, and run the chocolateyInstall script
    if (Get-Command Microsoft.PowerShell.Archive\Expand-Archive -ErrorAction SilentlyContinue) {
        Microsoft.PowerShell.Archive\Expand-Archive -Path $DownloadedNupkg -DestinationPath $TempDirectory -Force
    } else {
        # PowerShell versions <4.0 do not have this function available
        try {
            $shellApplication = New-Object -ComObject Shell.Application
            $zipPackage = $shellApplication.NameSpace($DownloadedNupkg)
            $destinationFolder = $shellApplication.NameSpace($TempDirectory)
            $destinationFolder.CopyHere($zipPackage.Items(), 0x10)
        } catch {
            Write-Warning "Unable to unzip package using built-in compression."
            throw $_
        }
    }

    & $(Join-Path $TempDirectory "tools\chocolateyInstall.ps1")
}

if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    refreshenv
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# choco feature enable -n useFipsCompliantChecksums

### b. Apply Recommended Configuration ###
#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
choco config set --name cacheLocation --value C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
choco config set --name commandExecutionTimeoutSeconds --value 14400

#### Turn off download progress when running choco through integrations
choco feature disable --name showDownloadProgress

### c. Sources ###
#### Remove the default community package repository source
choco source list --limitoutput | ConvertFrom-Csv -Header 'Name', 'Location' -Delimiter '|' | ForEach-Object {
    if ($_.Location -eq 'https://community.chocolatey.org/api/v2/') {
        choco source remove -n $_.Name
    }
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
if ($NugetRepositoryCredential) {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --user $NugetRepositoryCredential.UserName --password $NugetRepositoryCredential.GetNetworkCredential().Password --priority 1
} else {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --priority 1
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
choco upgrade chocolatey --confirm

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
choco install chocolatey-license --source $NugetRepositoryUrl --confirm

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco source disable --name chocolatey.licensed
} else {
    Write-Warning "Not disabling 'chocolatey.licensed' feed, as Chocolatey-License has not been installed."
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco install chocolatey.extension --source $NugetRepositoryUrl --confirm
} else {
    Write-Warning "Not installing 'chocolatey.extension', as Chocolatey-License has not been installed."
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
choco feature disable --name showNonElevatedWarnings
choco feature enable --name useBackgroundService
choco feature enable --name useBackgroundServiceWithNonAdministratorsOnly
choco feature enable --name allowBackgroundServiceUninstallsFromUserInstallsOnly
choco config set --name allowedBackgroundServiceCommands --value "install,upgrade,uninstall"

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if ($ChocolateyCentralManagementUrl) {
    choco install chocolatey-agent --source $NugetRepositoryUrl --confirm
    choco config set --name CentralManagementServiceUrl --value $ChocolateyCentralManagementUrl
    if ($ChocolateyCentralManagementClientSalt) {
        choco config set --name centralManagementClientCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementClientSalt
    }
    if ($ChocolateyCentralManagementServiceSalt) {
        choco config set --name centralManagementServiceCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementServiceSalt
    }
    choco feature enable --name useChocolateyCentralManagement
    choco feature enable --name useChocolateyCentralManagementDeployments
}

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. chocolatey.chocolatey
##### You will require the chocolatey.chocolatey collection to be installed
##### on all machines using this playbook.
##### Please see https://github.com/chocolatey/chocolatey-ansible/#installing-the-collection-from-ansible-galaxy

- name: Install and Configure Chocolatey
  hosts: all

## 2. TOP LEVEL VARIABLES ##
  vars:

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
    nuget_repository_url: INTERNAL REPO URL

### b. Internal Repository Credential ###
#### If required, add the repository access credential here and
#### uncomment lines with source_username and source_password below
#    nuget_repository_username: username
#    nuget_repository_password: password

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#    chocolatey_central_management_url: https://chocolatey-central-management:24020/ChocolateyManagementService

#### ii. If using a Client Salt, add it here
#    chocolatey_central_management_client_salt: clientsalt

#### iii. If using a Service Salt, add it here
#    chocolatey_central_management_service_salt: servicesalt

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

  tasks:
  - name: Install chocolatey
    win_chocolatey:
      name: chocolatey
      source: ""{{ nuget_repository_url }}""
      # source_username: ""{{ nuget_repository_username }}""
      # source_password: ""{{ nuget_repository_password }}""

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#   - name: Enable FIPS compliance
#     win_chocolatey_feature:
#       name: useFipsCompliantChecksums
#       state: enabled

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
  - name: Set the cache location
    win_chocolatey_config:
      name: cacheLocation
      state: present
      value: C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
  - name: Set the command execution timeout
    win_chocolatey_config:
      name: commandExecutionTimeoutSeconds
      state: present
      value: 14400

#### Turn off download progress when running choco through integrations
  - name: Disable showing download progress
    win_chocolatey_feature:
      name: showDownloadProgress
      state: disabled

### c. Sources ###
#### Remove the default community package repository source
  - name: Remove Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey
      state: absent

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here
#### NOTE: This EXAMPLE may require changes
  - name: Add Internal Repository
    win_chocolatey_source:
      name: ChocolateyInternal
      state: present
      source: {{ nuget_repository_url }}
      # source_username: {{ nuget_repository_username }}
      # source_password: {{ nuget_repository_password }}
      priority: 1

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
  - name: Upgrade Chocolatey
    win_chocolatey:
      name: chocolatey
      state: latest

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.
### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
  - name: Install Chocolatey License
    win_chocolatey:
      name: chocolatey-license
      source: ChocolateyInternal
      state: latest

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
  - name: Disable Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey.licensed
      state: disabled

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
  - name: Install Chocolatey Extension
    win_chocolatey:
      name: chocolatey.extension
      source: ChocolateyInternal
      state: latest

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
  - name: Hide not-elevated warnings
    win_chocolatey_feature:
      name: showNonElevatedWarnings
      state: disabled

  - name: Use background mode for self-service
    win_chocolatey_feature:
      name: useBackgroundService
      state: enabled

  - name: Use background service for non-admins
    win_chocolatey_feature:
      name: useBackgroundServiceWithNonAdministratorsOnly
      state: enabled

  - name: Allow background uninstallation for user installs
    win_chocolatey_feature:
      name: allowBackgroundServiceUninstallsFromUserInstallsOnly
      state: enabled

  - name: Set allowed background service commands
    win_chocolatey_config:
      name: backgroundServiceAllowedCommands
      state: present
      value: install,upgrade,uninstall

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
  - name: Install Chocolatey Agent
    when: chocolatey_central_management_url is defined
    win_chocolatey:
      name: chocolatey-agent
      source: ChocolateyInternal
      state: latest

  - name: Set the Central Management Service URL
    when: chocolatey_central_management_url is defined
    win_chocolatey_config:
      name: CentralManagementServiceUrl
      state: present
      value: {{ chocolatey_central_management_url }}

  - name: Set the Central Management Client Salt
    when: chocolatey_central_management_client_salt is defined
    win_chocolatey_config:
      name: centralManagementClientCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_client_salt }}

  - name: Set the Central Management Service Salt
    when: chocolatey_central_management_service_salt is defined
    win_chocolatey_config:
      name: centralManagementServiceCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_service_salt }}

  - name: Use Central Management
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagement
      state: enabled

  - name: Use Central Management Deployments
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagementDeployments
      state: enabled

See docs at https://docs.chef.io/resource_chocolatey_package.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### The Chocolatey resources are available with any recent version of Chef.
#### We utilise the Chocolatey recipe to install the Chocolatey binaries.
include_recipe "chocolatey"

## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# NugetRepositoryUsername = "username"
# NugetRepositoryPassword = "password"

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
ChocolateyNupkgUrl = "INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg",

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
node['chocolatey']['install vars'] = {
  'chocolateyDownloadUrl' => "#{ChocolateyNupkgUrl}",
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# chocolatey_feature 'useFipsCompliantChecksums' do
#   action :enable
# end

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolatey_config 'cacheLocation' do
  value 'C:\ProgramData\chocolatey\cache'
end

#### Increase timeout to at least 4 hours
chocolatey_config 'commandExecutionTimeoutSeconds' do
  value '14400'
end

#### Turn off download progress when running choco through integrations
chocolatey_feature 'showDownloadProgress' do
  action :disable
end

### c. Sources ###
#### Remove the default community package repository source
chocolatey_source 'chocolatey' do
  action :remove
end

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
chocolatey_source 'ChocolateyInternal' do
  source "#{NugetRepositoryUrl}"
  priority 1
  action   :add
end

execute 'ChocolateyInternal' do
  command "choco source add --name ChocolateyInternal -s #{NugetRepositoryUrl} -u=#{NugetRepositoryUsername} -p=#{NugetRepositoryPassword} --priority=1"
  only_if { NugetRepositoryUsername != nil || NugetRepositoryPassword != nil }
end

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
chocolatey_package 'chocolatey' do
  action :upgrade
  source "#{NugetRepositoryUrl}"
end

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
chocolatey_package 'chocolatey-license' do
  action :install
  source "#{NugetRepositoryUrl}"
end

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
chocolatey_source 'chocolatey.licensed' do
  action            :disable
end

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
chocolatey_package 'chocolatey.extention' do
  action     install
  source     "#{NugetRepositoryUrl}"
end

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolatey_feature 'showNonElevatedWarnings' do
  action :disable
end

chocolatey_feature 'useBackgroundService' do
  action :enable
end

chocolatey_feature 'useBackgroundServiceWithNonAdministratorsOnly' do
  action :enable
end

chocolatey_feature 'allowBackgroundServiceUninstallsFromUserInstallsOnly' do
  action :enable
end

chocolatey_config 'backgroundServiceAllowedCommands' do
  value 'install,upgrade,uninstall'
end

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
chocolatey_package 'chocolatey-agent' do
  action     install
  source     "#{NugetRepositoryUrl}"
  # user       "#{NugetRepositoryUsername}"
  # password   "#{NugetRepositoryPassword}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'CentralManagementServiceUrl' do
  value  "#{ChocolateyCentralManagementUrl}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'centralManagementClientCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementClientSalt}"
  only_if { ChocolateyCentralManagementClientSalt != nil }
end

chocolatey_config 'centralManagementServiceCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementServiceSalt}"
  only_if { ChocolateyCentralManagementServiceSalt != nil }
end

chocolatey_feature 'useChocolateyCentralManagement' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_feature 'useChocolateyCentralManagementDeployments' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.

If Applicable - Chocolatey Configuration/Installation


#requires -Modules cChoco
## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires chocolatey\cChoco DSC module to be installed on the machine compiling the DSC manifest
#### NOTE: This will need to be installed before running the DSC portion of this script
if (-not (Get-Module cChoco -ListAvailable)) {
    $null = Install-PackageProvider -Name NuGet -MinimumVersion 2.8.5.201 -Force
    if (($PSGallery = Get-PSRepository -Name PSGallery).InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy Trusted
    }
    Install-Module -Name cChoco
    if ($PSGallery.InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy $PSGallery.InstallationPolicy
    }
}

#### ii. Requires a hosted copy of the install.ps1 script
##### This should be available to download without authentication.
##### The original script can be found here: https://community.chocolatey.org/install.ps1

Configuration ChocolateyConfig {
## 2. TOP LEVEL VARIABLES ##
    param(
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
        $NugetRepositoryUrl      = "INTERNAL REPO URL",

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
        $ChocolateyNupkgUrl      = "INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg",

### c. Internal Repository Credential ###
#### If required, add the repository access credential here
#        $NugetRepositoryCredential = [PSCredential]::new(
#            "username",
#            ("password" | ConvertTo-SecureString -AsPlainText -Force)
#        ),

### d. Install.ps1 URL
#### The path to the hosted install script:
        $ChocolateyInstallPs1Url = "https://community.chocolatey.org/install.ps1"

### e. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#        $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService",

#### ii. If using a Client Salt, add it here
#        $ChocolateyCentralManagementClientSalt = "clientsalt",

#### iii. If using a Service Salt, add it here
#        $ChocolateyCentralManagementServiceSalt = "servicesalt"
    )
    Import-DscResource -ModuleName PSDesiredStateConfiguration
    Import-DscResource -ModuleName cChoco

    Node 'localhost' {
## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
        Environment chocoDownloadUrl {
            Name  = "chocolateyDownloadUrl"
            Value = $ChocolateyNupkgUrl
        }

        cChocoInstaller installChocolatey {
            DependsOn = "[Environment]chocoDownloadUrl"
            InstallDir = Join-Path $env:ProgramData "chocolatey"
            ChocoInstallScriptUrl = $ChocolateyInstallPs1Url
        }

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#        cChocoFeature featureFipsCompliance {
#            FeatureName = "useFipsCompliantChecksums"
#        }

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
        cChocoConfig cacheLocation {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "cacheLocation"
            Value      = "C:\ProgramData\chocolatey\cache"
        }

#### Increase timeout to at least 4 hours
        cChocoConfig commandExecutionTimeoutSeconds {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "commandExecutionTimeoutSeconds"
            Value      = 14400
        }

#### Turn off download progress when running choco through integrations
        cChocoFeature showDownloadProgress {
            DependsOn   = "[cChocoInstaller]installChocolatey"
            FeatureName = "showDownloadProgress"
            Ensure      = "Absent"
        }

### c. Sources ###
#### Remove the default community package repository source
        cChocoSource removeCommunityRepository {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name       = "chocolatey"
            Ensure     = "Absent"
        }

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here.
#### NOTE: This EXAMPLE may require changes
        cChocoSource addInternalSource {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name        = "ChocolateyInternal"
            Source      = $NugetRepositoryUrl
            Credentials = $NugetRepositoryCredential
            Priority    = 1
        }

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
        cChocoPackageInstaller updateChocolatey {
            DependsOn   = "[cChocoSource]addInternalSource", "[cChocoSource]removeCommunityRepository"
            Name        = "chocolatey"
            AutoUpgrade = $true
        }

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
        cChocoPackageInstaller chocolateyLicense {
            DependsOn = "[cChocoPackageInstaller]updateChocolatey"
            Name      = "chocolatey-license"
        }

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
        Script disableLicensedSource {
            DependsOn  = "[cChocoPackageInstaller]chocolateyLicense"
            GetScript  = {
                $Source = choco source list --limitoutput | `
                    ConvertFrom-Csv -Delimiter '|' -Header Name, Source, Disabled | `
                    Where-Object Name -eq "chocolatey.licensed"

                return @{
                    Result = if ($Source) {
                        [bool]::Parse($Source.Disabled)
                    } else {
                        Write-Warning "Source 'chocolatey.licensed' was not present."
                        $true  # Source does not need disabling
                    }
                }
            }
            SetScript  = {
                $null = choco source disable --name "chocolatey.licensed"
            }
            TestScript = {
                $State = [ScriptBlock]::Create($GetScript).Invoke()
                return $State.Result
            }
        }

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
        cChocoPackageInstaller chocolateyLicensedExtension {
            DependsOn = "[Script]disableLicensedSource"
            Name      = "chocolatey.extension"
        }

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
        cChocoFeature hideElevatedWarnings {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "showNonElevatedWarnings"
            Ensure      = "Absent"
        }

        cChocoFeature useBackgroundService {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundService"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceWithNonAdmins {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundServiceWithNonAdministratorsOnly"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceUninstallsForUserInstalls {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "allowBackgroundServiceUninstallsFromUserInstallsOnly"
            Ensure      = "Present"
        }

        cChocoConfig allowedBackgroundServiceCommands {
            DependsOn   = "[cChocoFeature]useBackgroundService"
            ConfigName = "backgroundServiceAllowedCommands"
            Value       = "install,upgrade,uninstall"
        }

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
        if ($ChocolateyCentralManagementUrl) {
            cChocoPackageInstaller chocolateyAgent {
                DependsOn = "[cChocoPackageInstaller]chocolateyLicensedExtension"
                Name      = "chocolatey-agent"
            }

            cChocoConfig centralManagementServiceUrl {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                ConfigName = "CentralManagementServiceUrl"
                Value       = $ChocolateyCentralManagementUrl
            }

            if ($ChocolateyCentralManagementClientSalt) {
                cChocoConfig centralManagementClientSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementClientCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementClientSalt
                }
            }

            if ($ChocolateyCentralManagementServiceSalt) {
                cChocoConfig centralManagementServiceSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementServiceCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementServiceSalt
                }
            }

            cChocoFeature useCentralManagement {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagement"
                Ensure      = "Present"
            }

            cChocoFeature useCentralManagementDeployments {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagementDeployments"
                Ensure      = "Present"
            }
        }
    }
}

# If working this into an existing configuration with a good method for
$ConfigData = @{
    AllNodes = @(
        @{
            NodeName                    = "localhost"
            PSDscAllowPlainTextPassword = $true
        }
    )
}

try {
    Push-Location $env:Temp
    $Config = ChocolateyConfig -ConfigurationData $ConfigData
    Start-DscConfiguration -Path $Config.PSParentPath -Wait -Verbose -Force
} finally {
    Pop-Location
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires puppetlabs/chocolatey module
####  See https://forge.puppet.com/puppetlabs/chocolatey


## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$_repository_url = 'INTERNAL REPO URL'

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
$_choco_download_url = 'INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg'

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $_chocolatey_central_management_url = 'https://chocolatey-central-management:24020/ChocolateyManagementService'

#### ii. If using a Client Salt, add it here
# $_chocolatey_central_management_client_salt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $_chocolatey_central_management_service_salt = 'servicesalt'


## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
### Note: `chocolatey_download_url is completely different than normal
###  source locations. This is directly to the bare download url for the
###  chocolatey.nupkg, similar to what you see when you browse to
###  https://community.chocolatey.org/api/v2/package/chocolatey
class {'chocolatey':
  chocolatey_download_url => $_choco_download_url,
  use_7zip                => false,
}


## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations

#chocolateyfeature {'useFipsCompliantChecksums':
#  ensure => enabled,
#}

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolateyconfig {'cacheLocation':
  value => 'C:\ProgramData\chocolatey\cache',
}

#### Increase timeout to at least 4 hours
chocolateyconfig {'commandExecutionTimeoutSeconds':
  value => '14400',
}

#### Turn off download progress when running choco through integrations
chocolateyfeature {'showDownloadProgress':
  ensure => disabled,
}

### c. Sources ###
#### Remove the default community package repository source
chocolateysource {'chocolatey':
  ensure   => absent,
  location => 'https://community.chocolatey.org/api/v2/',
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE requires changes
chocolateysource {'internal_chocolatey':
  ensure             => present,
  location           => $_repository_url,
  priority           => 1,
  username           => 'optional',
  password           => 'optional,not ensured',
  bypass_proxy       => true,
  admin_only         => false,
  allow_self_service => false,
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/

package {'chocolatey':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}


## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/guides/organizations/organizational-deployment-guide#exercise-4-create-a-package-for-the-license

# TODO: Add resource for installing/ensuring the chocolatey-license package
package {'chocolatey-license':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
## Disabled sources still need all other attributes until
## https://tickets.puppetlabs.com/browse/MODULES-4449 is resolved.
## Password is necessary with user, but not ensurable, so it should not
## matter what it is set to here. If you ever do get into trouble here,
## the password is your license GUID.
chocolateysource {'chocolatey.licensed':
  ensure   => disabled,
  priority => '10',
  user     => 'customer',
  password => '1234',
  require  => Package['chocolatey-license'],
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
package {'chocolatey.extension':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
  require  => Package['chocolatey-license'],
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolateyfeature {'showNonElevatedWarnings':
  ensure => disabled,
}

chocolateyfeature {'useBackgroundService':
  ensure => enabled,
}

chocolateyfeature {'useBackgroundServiceWithNonAdministratorsOnly':
  ensure => enabled,
}

chocolateyfeature {'allowBackgroundServiceUninstallsFromUserInstallsOnly':
  ensure => enabled,
}

chocolateyconfig {'backgroundServiceAllowedCommands':
  value => 'install,upgrade,uninstall',
}

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if $_chocolatey_central_management_url {
  package {'chocolatey-agent':
    ensure   => latest,
    provider => chocolatey,
    source   => $_repository_url,
    require  => Package['chocolatey-license'],
  }

  chocolateyconfig {'CentralManagementServiceUrl':
    value   => $_chocolatey_central_management_url,
  }

  if $_chocolatey_central_management_client_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  if $_chocolatey_central_management_service_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  chocolateyfeature {'useChocolateyCentralManagement':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }

  chocolateyfeature {'useChocolateyCentralManagementDeployments':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }
}

Need Help? View our docs or file an issue.

There is already a version of this package in your Script Builder

Current Version	New Version

Downloads:

1,238,667

Downloads of v 3.5.3.20220128:

124

Last Update:

28 Jan 2022

Package Maintainer(s):

Software Author(s):

The Apache Maven team

Tags:

apache maven build script xml java development

Maven

This is not the latest version of Maven available.

3.5.3.20220128 | Updated: 28 Jan 2022

Downloads:

1,238,667

Downloads of v 3.5.3.20220128:

124

Maintainer(s):

Software Author(s):

The Apache Maven team

Tags:

apache maven build script xml java development

Maven 3.5.3.20220128

This is not the latest version of Maven available.

Legal Disclaimer: Neither this package nor Chocolatey Software, Inc. are affiliated with or endorsed by The Apache Maven team. The inclusion of The Apache Maven team trademark(s), if any, upon this webpage is solely to identify The Apache Maven team goods or services and not for commercial purposes.

All Checks are Passing

3 Passing Tests

Show Checks

Validation Testing Passed

Verification Testing Passed

Details

Scan Testing Successful:

No detections found in any package files

Details

Learn More

Deployment Method: Individual Install, Upgrade, & Uninstall

To install Maven, run the following command from the command line or from PowerShell:

To upgrade Maven, run the following command from the command line or from PowerShell:

To uninstall Maven, run the following command from the command line or from PowerShell:

NOTE

This applies to both open source and commercial editions of Chocolatey.

1. Enter Your Internal Repository Url

(this should look similar to https://community.chocolatey.org/api/v2/)

2. Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the package and push it to a repository Download

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the package:
  Download
- Follow manual internalization instructions

Package Internalizer (C4B)

Run: (additional options)

choco download maven --internalize --version=3.5.3.20220128 --source=https://community.chocolatey.org/api/v2/

For package and dependencies run:

choco push --source="'INTERNAL REPO URL'"

Automate package internalization

3. Copy Your Script

choco upgrade maven -y --source="'INTERNAL REPO URL'" --version="'3.5.3.20220128'" [other options]

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:


choco upgrade maven -y --source="'INTERNAL REPO URL'" --version="'3.5.3.20220128'" 
$exitCode = $LASTEXITCODE

Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
  Exit 0
}

Exit $exitCode


- name: Install maven
  win_chocolatey:
    name: maven
    version: '3.5.3.20220128'
    source: INTERNAL REPO URL
    state: present

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.


chocolatey_package 'maven' do
  action    :install
  source   'INTERNAL REPO URL'
  version  '3.5.3.20220128'
end

See docs at https://docs.chef.io/resource_chocolatey_package.html.


cChocoPackageInstaller maven
{
    Name     = "maven"
    Version  = "3.5.3.20220128"
    Source   = "INTERNAL REPO URL"
}

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.


package { 'maven':
  ensure   => '3.5.3.20220128',
  provider => 'chocolatey',
  source   => 'INTERNAL REPO URL',
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

4. If applicable - Chocolatey configuration/installation

See infrastructure management matrix for Chocolatey configuration elements and examples.

Package Approved

This package was approved as a trusted package on 28 Jan 2022.

Description

Apache Maven is a software project management and comprehension tool. Based on the concept of a project object
model (POM), Maven can manage a project's build, reporting and documentation from a central piece of information

Please Note: This is an automatically updated package. If you find it is
out of date by more than a day or two, please contact the maintainer(s) and
let them know the package is no longer updating correctly.

Files

apache-maven-3.5.3\bin\m2.conf

main is org.apache.maven.cli.MavenCli from plexus.core

set maven.conf default ${maven.home}/conf

[plexus.core]
load       ${maven.conf}/logging
optionally ${maven.home}/lib/ext/*.jar
load       ${maven.home}/lib/*.jar

apache-maven-3.5.3\bin\mvn

apache-maven-3.5.3\bin\mvn.cmd

@REM Licensed to the Apache Software Foundation (ASF) under one
@REM or more contributor license agreements.  See the NOTICE file
@REM distributed with this work for additional information
@REM regarding copyright ownership.  The ASF licenses this file
@REM to you under the Apache License, Version 2.0 (the
@REM "License"); you may not use this file except in compliance
@REM with the License.  You may obtain a copy of the License at
@REM
@REM    http://www.apache.org/licenses/LICENSE-2.0
@REM
@REM Unless required by applicable law or agreed to in writing,
@REM software distributed under the License is distributed on an
@REM "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
@REM KIND, either express or implied.  See the License for the
@REM specific language governing permissions and limitations
@REM under the License.

@REM -----------------------------------------------------------------------------
@REM Apache Maven Startup Script
@REM
@REM Environment Variable Prerequisites
@REM
@REM   JAVA_HOME          Must point at your Java Development Kit installation.
@REM   MAVEN_BATCH_ECHO  (Optional) Set to 'on' to enable the echoing of the batch commands.
@REM   MAVEN_BATCH_PAUSE (Optional) set to 'on' to wait for a key stroke before ending.
@REM   MAVEN_OPTS        (Optional) Java runtime options used when Maven is executed.
@REM   MAVEN_SKIP_RC     (Optional) Flag to disable loading of mavenrc files.
@REM -----------------------------------------------------------------------------

@REM Begin all REM lines with '@' in case MAVEN_BATCH_ECHO is 'on'
@echo off
@REM enable echoing my setting MAVEN_BATCH_ECHO to 'on'
@if "%MAVEN_BATCH_ECHO%"=="on" echo %MAVEN_BATCH_ECHO%

@REM Execute a user defined script before this one
if not "%MAVEN_SKIP_RC%"=="" goto skipRcPre
@REM check for pre script, once with legacy .bat ending and once with .cmd ending
if exist "%USERPROFILE%\mavenrc_pre.bat" call "%USERPROFILE%\mavenrc_pre.bat"
if exist "%USERPROFILE%\mavenrc_pre.cmd" call "%USERPROFILE%\mavenrc_pre.cmd"
:skipRcPre

@setlocal

set ERROR_CODE=0

@REM ==== START VALIDATION ====
if not "%JAVA_HOME%"=="" goto OkJHome
for %%i in (java.exe) do set "JAVACMD=%%~$PATH:i"
goto checkJCmd

:OkJHome
set "JAVACMD=%JAVA_HOME%\bin\java.exe"

:checkJCmd
if exist "%JAVACMD%" goto chkMHome

echo The JAVA_HOME environment variable is not defined correctly >&2
echo This environment variable is needed to run this program >&2
echo NB: JAVA_HOME should point to a JDK not a JRE >&2
goto error

:chkMHome
set "MAVEN_HOME=%~dp0.."
if not "%MAVEN_HOME%"=="" goto stripMHome
goto error

:stripMHome
if not "_%MAVEN_HOME:~-1%"=="_\" goto checkMCmd
set "MAVEN_HOME=%MAVEN_HOME:~0,-1%"
goto stripMHome

:checkMCmd
if exist "%MAVEN_HOME%\bin\mvn.cmd" goto init
goto error
@REM ==== END VALIDATION ====

:init

set MAVEN_CMD_LINE_ARGS=%*

@REM Find the project basedir, i.e., the directory that contains the folder ".mvn".
@REM Fallback to current working directory if not found.

set "MAVEN_PROJECTBASEDIR=%MAVEN_BASEDIR%"
if not "%MAVEN_PROJECTBASEDIR%"=="" goto endDetectBaseDir

set "EXEC_DIR=%CD%"
set "WDIR=%EXEC_DIR%"

@REM Look for the --file switch and start the search for the .mvn directory from the specified
@REM POM location, if supplied.

set FILE_ARG=
:arg_loop
if "%~1" == "-f" (
  set "FILE_ARG=%~2"
  shift
  goto process_file_arg
)
if "%~1" == "--file" (
  set "FILE_ARG=%~2"
  shift
  goto process_file_arg
)
@REM If none of the above, skip the argument
shift
if not "%~1" == "" (
  goto arg_loop
) else (
  goto findBaseDir
)

:process_file_arg
if "%FILE_ARG%" == "" (
  goto findBaseDir
)
if not exist "%FILE_ARG%" (
  echo POM file %FILE_ARG% specified the -f/--file command-line argument does not exist >&2
  goto error
)
if exist "%FILE_ARG%\*" (
  set "POM_DIR=%FILE_ARG%"
) else (
  call :get_directory_from_file "%FILE_ARG%"
)
if not exist "%POM_DIR%" (
  echo Directory %POM_DIR% extracted from the -f/--file command-line argument %FILE_ARG% does not exist >&2
  goto error
)
set "WDIR=%POM_DIR%"
goto findBaseDir

:get_directory_from_file
set "POM_DIR=%~dp1"
:stripPomDir
if not "_%POM_DIR:~-1%"=="_\" goto pomDirStripped
set "POM_DIR=%POM_DIR:~0,-1%"
goto stripPomDir
:pomDirStripped
exit /b

:findBaseDir
cd /d "%WDIR%"
:findBaseDirLoop
if exist "%WDIR%\.mvn" goto baseDirFound
cd ..
IF "%WDIR%"=="%CD%" goto baseDirNotFound
set "WDIR=%CD%"
goto findBaseDirLoop

:baseDirFound
set "MAVEN_PROJECTBASEDIR=%WDIR%"
cd /d "%EXEC_DIR%"
goto endDetectBaseDir

:baseDirNotFound
if "_%EXEC_DIR:~-1%"=="_\" set "EXEC_DIR=%EXEC_DIR:~0,-1%"
set "MAVEN_PROJECTBASEDIR=%EXEC_DIR%"
cd "%EXEC_DIR%"

:endDetectBaseDir

set "jvmConfig=\.mvn\jvm.config"
if not exist "%MAVEN_PROJECTBASEDIR%%jvmConfig%" goto endReadAdditionalConfig

@setlocal EnableExtensions EnableDelayedExpansion
for /F "usebackq delims=" %%a in ("%MAVEN_PROJECTBASEDIR%\.mvn\jvm.config") do set JVM_CONFIG_MAVEN_PROPS=!JVM_CONFIG_MAVEN_PROPS! %%a
@endlocal & set JVM_CONFIG_MAVEN_PROPS=%JVM_CONFIG_MAVEN_PROPS%

:endReadAdditionalConfig

for %%i in ("%MAVEN_HOME%"\boot\plexus-classworlds-*) do set CLASSWORLDS_JAR="%%i"
set CLASSWORLDS_LAUNCHER=org.codehaus.plexus.classworlds.launcher.Launcher

"%JAVACMD%" ^
  %JVM_CONFIG_MAVEN_PROPS% ^
  %MAVEN_OPTS% ^
  %MAVEN_DEBUG_OPTS% ^
  -classpath %CLASSWORLDS_JAR% ^
  "-Dclassworlds.conf=%MAVEN_HOME%\bin\m2.conf" ^
  "-Dmaven.home=%MAVEN_HOME%" ^
  "-Dlibrary.jansi.path=%MAVEN_HOME%\lib\jansi-native" ^
  "-Dmaven.multiModuleProjectDirectory=%MAVEN_PROJECTBASEDIR%" ^
  %CLASSWORLDS_LAUNCHER% %MAVEN_CMD_LINE_ARGS%
if ERRORLEVEL 1 goto error
goto end

:error
set ERROR_CODE=1

:end
@endlocal & set ERROR_CODE=%ERROR_CODE%

if not "%MAVEN_SKIP_RC%"=="" goto skipRcPost
@REM check for post script, once with legacy .bat ending and once with .cmd ending
if exist "%USERPROFILE%\mavenrc_post.bat" call "%USERPROFILE%\mavenrc_post.bat"
if exist "%USERPROFILE%\mavenrc_post.cmd" call "%USERPROFILE%\mavenrc_post.cmd"
:skipRcPost

@REM pause the script if MAVEN_BATCH_PAUSE is set to 'on'
if "%MAVEN_BATCH_PAUSE%"=="on" pause

if "%MAVEN_TERMINATE_CMD%"=="on" exit %ERROR_CODE%

cmd /C exit /B %ERROR_CODE%

apache-maven-3.5.3\bin\mvnDebug

apache-maven-3.5.3\bin\mvnDebug.cmd

@REM Licensed to the Apache Software Foundation (ASF) under one
@REM or more contributor license agreements.  See the NOTICE file
@REM distributed with this work for additional information
@REM regarding copyright ownership.  The ASF licenses this file
@REM to you under the Apache License, Version 2.0 (the
@REM "License"); you may not use this file except in compliance
@REM with the License.  You may obtain a copy of the License at
@REM
@REM    http://www.apache.org/licenses/LICENSE-2.0
@REM
@REM Unless required by applicable law or agreed to in writing,
@REM software distributed under the License is distributed on an
@REM "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
@REM KIND, either express or implied.  See the License for the
@REM specific language governing permissions and limitations
@REM under the License.

@REM -----------------------------------------------------------------------------
@REM Apache Maven Debug Script
@REM
@REM Environment Variable Prerequisites
@REM
@REM   JAVA_HOME          Must point at your Java Development Kit installation.
@REM   MAVEN_BATCH_ECHO  (Optional) Set to 'on' to enable the echoing of the batch commands.
@REM   MAVEN_BATCH_PAUSE (Optional) set to 'on' to wait for a key stroke before ending.
@REM   MAVEN_OPTS        (Optional) Java runtime options used when Maven is executed.
@REM   MAVEN_SKIP_RC     (Optional) Flag to disable loading of mavenrc files.
@REM -----------------------------------------------------------------------------

@setlocal
@set MAVEN_DEBUG_OPTS=-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=8000

@call "%~dp0"mvn.cmd %*

apache-maven-3.5.3\bin\mvnyjp

apache-maven-3.5.3\boot\plexus-classworlds-2.5.2.jar

apache-maven-3.5.3\conf\logging\simplelogger.properties

apache-maven-3.5.3\conf\settings.xml

<?xml version="1.0" encoding="UTF-8"?>

<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements.  See the NOTICE file
distributed with this work for additional information
regarding copyright ownership.  The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License.  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied.  See the License for the
specific language governing permissions and limitations
under the License.
-->

<!--
 | This is the configuration file for Maven. It can be specified at two levels:
 |
 |  1. User Level. This settings.xml file provides configuration for a single user,
 |                 and is normally provided in ${user.home}/.m2/settings.xml.
 |
 |                 NOTE: This location can be overridden with the CLI option:
 |
 |                 -s /path/to/user/settings.xml
 |
 |  2. Global Level. This settings.xml file provides configuration for all Maven
 |                 users on a machine (assuming they're all using the same Maven
 |                 installation). It's normally provided in
 |                 ${maven.conf}/settings.xml.
 |
 |                 NOTE: This location can be overridden with the CLI option:
 |
 |                 -gs /path/to/global/settings.xml
 |
 | The sections in this sample file are intended to give you a running start at
 | getting the most out of your Maven installation. Where appropriate, the default
 | values (values used when the setting is not specified) are provided.
 |
 |-->
<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
          xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
  <!-- localRepository
   | The path to the local repository maven will use to store artifacts.
   |
   | Default: ${user.home}/.m2/repository
  <localRepository>/path/to/local/repo</localRepository>
  -->

  <!-- interactiveMode
   | This will determine whether maven prompts you when it needs input. If set to false,
   | maven will use a sensible default value, perhaps based on some other setting, for
   | the parameter in question.
   |
   | Default: true
  <interactiveMode>true</interactiveMode>
  -->

  <!-- offline
   | Determines whether maven should attempt to connect to the network when executing a build.
   | This will have an effect on artifact downloads, artifact deployment, and others.
   |
   | Default: false
  <offline>false</offline>
  -->

  <!-- pluginGroups
   | This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
   | when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
   | "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
   |-->
  <pluginGroups>
    <!-- pluginGroup
     | Specifies a further group identifier to use for plugin lookup.
    <pluginGroup>com.your.plugins</pluginGroup>
    -->
  </pluginGroups>

  <!-- proxies
   | This is a list of proxies which can be used on this machine to connect to the network.
   | Unless otherwise specified (by system property or command-line switch), the first proxy
   | specification in this list marked as active will be used.
   |-->
  <proxies>
    <!-- proxy
     | Specification for one proxy, to be used in connecting to the network.
     |
    <proxy>
      <id>optional</id>
      <active>true</active>
      <protocol>http</protocol>
      <username>proxyuser</username>
      <password>proxypass</password>
      <host>proxy.host.net</host>
      <port>80</port>
      <nonProxyHosts>local.net|some.host.com</nonProxyHosts>
    </proxy>
    -->
  </proxies>

  <!-- servers
   | This is a list of authentication profiles, keyed by the server-id used within the system.
   | Authentication profiles can be used whenever maven must make a connection to a remote server.
   |-->
  <servers>
    <!-- server
     | Specifies the authentication information to use when connecting to a particular server, identified by
     | a unique name within the system (referred to by the 'id' attribute below).
     |
     | NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are
     |       used together.
     |
    <server>
      <id>deploymentRepo</id>
      <username>repouser</username>
      <password>repopwd</password>
    </server>
    -->

    <!-- Another sample, using keys to authenticate.
    <server>
      <id>siteServer</id>
      <privateKey>/path/to/private/key</privateKey>
      <passphrase>optional; leave empty if not used.</passphrase>
    </server>
    -->
  </servers>

  <!-- mirrors
   | This is a list of mirrors to be used in downloading artifacts from remote repositories.
   |
   | It works like this: a POM may declare a repository to use in resolving certain artifacts.
   | However, this repository may have problems with heavy traffic at times, so people have mirrored
   | it to several places.
   |
   | That repository definition will have a unique id, so we can create a mirror reference for that
   | repository, to be used as an alternate download site. The mirror site will be the preferred
   | server for that repository.
   |-->
  <mirrors>
    <!-- mirror
     | Specifies a repository mirror site to use instead of a given repository. The repository that
     | this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used
     | for inheritance and direct lookup purposes, and must be unique across the set of mirrors.
     |
    <mirror>
      <id>mirrorId</id>
      <mirrorOf>repositoryId</mirrorOf>
      <name>Human Readable Name for this Mirror.</name>
      <url>http://my.repository.com/repo/path</url>
    </mirror>
     -->
  </mirrors>

  <!-- profiles
   | This is a list of profiles which can be activated in a variety of ways, and which can modify
   | the build process. Profiles provided in the settings.xml are intended to provide local machine-
   | specific paths and repository locations which allow the build to work in the local environment.
   |
   | For example, if you have an integration testing plugin - like cactus - that needs to know where
   | your Tomcat instance is installed, you can provide a variable here such that the variable is
   | dereferenced during the build process to configure the cactus plugin.
   |
   | As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
   | section of this document (settings.xml) - will be discussed later. Another way essentially
   | relies on the detection of a system property, either matching a particular value for the property,
   | or merely testing its existence. Profiles can also be activated by JDK version prefix, where a
   | value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
   | Finally, the list of active profiles can be specified directly from the command line.
   |
   | NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
   |       repositories, plugin repositories, and free-form properties to be used as configuration
   |       variables for plugins in the POM.
   |
   |-->
  <profiles>
    <!-- profile
     | Specifies a set of introductions to the build process, to be activated using one or more of the
     | mechanisms described above. For inheritance purposes, and to activate profiles via <activatedProfiles/>
     | or the command line, profiles have to have an ID that is unique.
     |
     | An encouraged best practice for profile identification is to use a consistent naming convention
     | for profiles, such as 'env-dev', 'env-test', 'env-production', 'user-jdcasey', 'user-brett', etc.
     | This will make it more intuitive to understand what the set of introduced profiles is attempting
     | to accomplish, particularly when you only have a list of profile id's for debug.
     |
     | This profile example uses the JDK version to trigger activation, and provides a JDK-specific repo.
    <profile>
      <id>jdk-1.4</id>

      <activation>
        <jdk>1.4</jdk>
      </activation>

      <repositories>
        <repository>
          <id>jdk14</id>
          <name>Repository for JDK 1.4 builds</name>
          <url>http://www.myhost.com/maven/jdk14</url>
          <layout>default</layout>
          <snapshotPolicy>always</snapshotPolicy>
        </repository>
      </repositories>
    </profile>
    -->

    <!--
     | Here is another profile, activated by the system property 'target-env' with a value of 'dev',
     | which provides a specific path to the Tomcat instance. To use this, your plugin configuration
     | might hypothetically look like:
     |
     | ...
     | <plugin>
     |   <groupId>org.myco.myplugins</groupId>
     |   <artifactId>myplugin</artifactId>
     |
     |   <configuration>
     |     <tomcatLocation>${tomcatPath}</tomcatLocation>
     |   </configuration>
     | </plugin>
     | ...
     |
     | NOTE: If you just wanted to inject this configuration whenever someone set 'target-env' to
     |       anything, you could just leave off the <value/> inside the activation-property.
     |
    <profile>
      <id>env-dev</id>

      <activation>
        <property>
          <name>target-env</name>
          <value>dev</value>
        </property>
      </activation>

      <properties>
        <tomcatPath>/path/to/tomcat/instance</tomcatPath>
      </properties>
    </profile>
    -->
  </profiles>

  <!-- activeProfiles
   | List of profiles that are active for all builds.
   |
  <activeProfiles>
    <activeProfile>alwaysActiveProfile</activeProfile>
    <activeProfile>anotherAlwaysActiveProfile</activeProfile>
  </activeProfiles>
  -->
</settings>

apache-maven-3.5.3\conf\toolchains.xml

<?xml version="1.0" encoding="UTF-8"?>

<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements.  See the NOTICE file
distributed with this work for additional information
regarding copyright ownership.  The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License.  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied.  See the License for the
specific language governing permissions and limitations
under the License.
-->

<!--
 | This is the toolchains file for Maven. It can be specified at two levels:
 |
 |  1. User Level. This toolchains.xml file provides configuration for a single user,
 |                 and is normally provided in ${user.home}/.m2/toolchains.xml.
 |
 |                 NOTE: This location can be overridden with the CLI option:
 |
 |                 -t /path/to/user/toolchains.xml
 |
 |  2. Global Level. This toolchains.xml file provides configuration for all Maven
 |                 users on a machine (assuming they're all using the same Maven
 |                 installation). It's normally provided in
 |                 ${maven.conf}/toolchains.xml.
 |
 |                 NOTE: This location can be overridden with the CLI option:
 |
 |                 -gt /path/to/global/toolchains.xml
 |
 | The sections in this sample file are intended to give you a running start at
 | getting the most out of your Maven installation.
 |-->
<toolchains xmlns="http://maven.apache.org/TOOLCHAINS/1.1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  xsi:schemaLocation="http://maven.apache.org/TOOLCHAINS/1.1.0 http://maven.apache.org/xsd/toolchains-1.1.0.xsd">

  <!-- 
   | With toolchains you can refer to installations on your system. This 
   | way you don't have to hardcode paths in your pom.xml. 
   | 
   | Every toolchain consist of 3 elements: 
   | * type: the type of tool. An often used value is 'jdk'. Toolchains-aware 
   |   plugins should document which type you must use. 
   | 
   | * provides: A list of key/value-pairs. 
   |   Based on the toolchain-configuration in the pom.xml Maven will search for 
   |   matching <provides/> configuration. You can decide for yourself which key-value 
   |   pairs to use. Often used keys are 'version', 'vendor' and 'arch'. By default 
   |   the version has a special meaning. If you configured in the pom.xml '1.5' 
   |   Maven will search for 1.5 and above.
   |   
   | * configuration: Additional configuration for this tool.
   |   Look for documentation of the toolchains-aware plugin which configuration elements
   |   can be used.   
   |
   | See also https://maven.apache.org/guides/mini/guide-using-toolchains.html
   |
   | General example

  <toolchain>
    <type/>
    <provides> 
      <version>1.0</version> 
    </provides> 
    <configuration/>
  </toolchain>
   
   | JDK examples

  <toolchain>
    <type>jdk</type>
    <provides>
      <version>1.5</version>
      <vendor>sun</vendor>
    </provides>
    <configuration>
      <jdkHome>/path/to/jdk/1.5</jdkHome>
    </configuration>
  </toolchain>
  <toolchain>
    <type>jdk</type>
    <provides>
      <version>1.6</version>
      <vendor>sun</vendor>
    </provides>
    <configuration>
      <jdkHome>/path/to/jdk/1.6</jdkHome>
    </configuration>
  </toolchain>
   
  -->

</toolchains>

apache-maven-3.5.3\lib\aopalliance-1.0.jar

apache-maven-3.5.3\lib\cdi-api-1.0.jar

apache-maven-3.5.3\lib\cdi-api.license

apache-maven-3.5.3\lib\commons-cli-1.4.jar

apache-maven-3.5.3\lib\commons-cli.license

apache-maven-3.5.3\lib\commons-io-2.5.jar

apache-maven-3.5.3\lib\commons-io.license

apache-maven-3.5.3\lib\commons-lang3-3.5.jar

apache-maven-3.5.3\lib\commons-lang3.license

apache-maven-3.5.3\lib\ext\README.txt

Use this directory to contribute 3rd-party extensions to the Maven core. These extensions can either extend or override
Maven's default implementation.

apache-maven-3.5.3\lib\guava-20.0.jar

apache-maven-3.5.3\lib\guice-4.0-no_aop.jar

apache-maven-3.5.3\lib\jansi-1.17.jar

apache-maven-3.5.3\lib\jansi-native\freebsd32\libjansi.so

md5: 028976EBEC006EB3B2EF30D91DA59862 | sha1: 1701016BCE7CC6A2B988E411EA985D292D84D7B4 | sha256: C220943D4C08EC91C1389A73E582FFACAEFC4E42F85A9905D1D9C895C955F207 | sha512: 7E245B9412F37CAD6CFC02E6EF93449E7DCC1313E0C3C897AFCD092F55A09FA070B8175A7D6BD7B755C674E6A58492C0997ED14121C2FFE35EBC6D98E22BC72E

apache-maven-3.5.3\lib\jansi-native\freebsd64\libjansi.so

md5: 437D3C50430C43B894C8C6BAA44ECBE9 | sha1: E041F979E51340C782A5542C8652C7A71CC7E370 | sha256: 96ACFECB89242A9555242E19C25988D7F476CE696573B0155598CFF6D453D987 | sha512: 905305E3A643B11C5CBBDB43727335D219B8A5C39020D7602856D1072603F66ED732B6436B097A77CB39B1D53A63202C9B165A3D9FBB91A084589B77F5F5429E

apache-maven-3.5.3\lib\jansi-native\linux32\libjansi.so

md5: D8ED10A3AAD09F1726CC856C47E99159 | sha1: 84D54E10C45A1E3BE5BB18BEB3709675E2979753 | sha256: 7732526B162B66835A53AD73E0731819B49FB585FDB3936BBC472AE7DFC3011E | sha512: 19ABFA1F48C2D68214EFB6B3119103DE0C91462108E7056991A0B8EBEE555FE0091FAAB121C7EC4D2C1CEF5844ABEAF12CA43D79FE8F85D989A946811EAAF82E

apache-maven-3.5.3\lib\jansi-native\linux64\libjansi.so

md5: 45A597518BEB72080D2D1900E95D3222 | sha1: 2D4219085795C2E6E7D98229C39E36F19CAB9C13 | sha256: DCF42B19FEB29D697EE3575FD622F96165B2F9E294D4D53F6274070BD5869EDE | sha512: 350DE0CC7AFC450378E6E370AA837BD73DBBC486BB6F993E262F6CA7B427EEBE7AC7AEA94977F7D2873EE41E20393A01AEC763F4AD19AEB687507E3EF0265A17

apache-maven-3.5.3\lib\jansi-native\osx\libjansi.jnilib

apache-maven-3.5.3\lib\jansi-native\README.txt

This directory contains Jansi native libraries, extracted from Jansi jar.

You can add your own extensions for platforms not natively supported by
Jansi: the libraries follow HawtJNI directory and filename conventions.
See http://fusesource.github.io/hawtjni/documentation/api/org/fusesource/hawtjni/runtime/Library.html

See https://github.com/fusesource/jansi-native for native lib source.

apache-maven-3.5.3\lib\jansi-native\windows32\jansi.dll

md5: 730A73D57E1B6822BD2E5303378C26DA | sha1: 807D36906AE08EBEBD5FD1EA4470FC7F45AD31D4 | sha256: 3C130AD32A4186ADB5316A3458B0C1844EBEF43E52FC09797B96CAD9EB159D18 | sha512: CD41095BEECB5DC0E99913B2BD9272A5B037509C87F0AB8EF7D52E75FFD85AF062C49C08F090B4E2CA3604E5D9B4E256B2657A5748F3FE835C5BC9D77CCD3055

apache-maven-3.5.3\lib\jansi-native\windows64\jansi.dll

md5: 3F6774EA79D7C3A94EC3C85F8286A833 | sha1: 93FA3188ADB8407F81DAD04D08ABC8192E4E380D | sha256: 629AF6E8E32DAC48131A0607DC70C62A2D2A1DAC6315D96B95449DB141E13ACB | sha512: 478D613DE55D7233DDC05D5BA75D7799255E5309C3C497DD46D7C8D4AE0B33248171CC3790FA7841F7DB1FB38A9872AA31C8FE79F8D9B9317ED0E6A0B4F3BFAB

apache-maven-3.5.3\lib\javax.inject-1.jar

apache-maven-3.5.3\lib\jcl-over-slf4j-1.7.25.jar

apache-maven-3.5.3\lib\jcl-over-slf4j.license

apache-maven-3.5.3\lib\jsr250-api-1.0.jar

apache-maven-3.5.3\lib\jsr250-api.license

apache-maven-3.5.3\lib\maven-artifact-3.5.3.jar

apache-maven-3.5.3\lib\maven-artifact.license

apache-maven-3.5.3\lib\maven-builder-support-3.5.3.jar

apache-maven-3.5.3\lib\maven-builder-support.license

apache-maven-3.5.3\lib\maven-compat-3.5.3.jar

apache-maven-3.5.3\lib\maven-compat.license

apache-maven-3.5.3\lib\maven-core-3.5.3.jar

apache-maven-3.5.3\lib\maven-core.license

apache-maven-3.5.3\lib\maven-embedder-3.5.3.jar

apache-maven-3.5.3\lib\maven-embedder.license

apache-maven-3.5.3\lib\maven-model-3.5.3.jar

apache-maven-3.5.3\lib\maven-model-builder-3.5.3.jar

apache-maven-3.5.3\lib\maven-model-builder.license

apache-maven-3.5.3\lib\maven-model.license

apache-maven-3.5.3\lib\maven-plugin-api-3.5.3.jar

apache-maven-3.5.3\lib\maven-plugin-api.license

apache-maven-3.5.3\lib\maven-repository-metadata-3.5.3.jar

apache-maven-3.5.3\lib\maven-repository-metadata.license

apache-maven-3.5.3\lib\maven-resolver-api-1.1.1.jar

apache-maven-3.5.3\lib\maven-resolver-api.license

apache-maven-3.5.3\lib\maven-resolver-connector-basic-1.1.1.jar

apache-maven-3.5.3\lib\maven-resolver-connector-basic.license

apache-maven-3.5.3\lib\maven-resolver-impl-1.1.1.jar

apache-maven-3.5.3\lib\maven-resolver-impl.license

apache-maven-3.5.3\lib\maven-resolver-provider-3.5.3.jar

apache-maven-3.5.3\lib\maven-resolver-provider.license

apache-maven-3.5.3\lib\maven-resolver-spi-1.1.1.jar

apache-maven-3.5.3\lib\maven-resolver-spi.license

apache-maven-3.5.3\lib\maven-resolver-transport-wagon-1.1.1.jar

apache-maven-3.5.3\lib\maven-resolver-transport-wagon.license

apache-maven-3.5.3\lib\maven-resolver-util-1.1.1.jar

apache-maven-3.5.3\lib\maven-resolver-util.license

apache-maven-3.5.3\lib\maven-settings-3.5.3.jar

apache-maven-3.5.3\lib\maven-settings-builder-3.5.3.jar

apache-maven-3.5.3\lib\maven-settings-builder.license

apache-maven-3.5.3\lib\maven-settings.license

apache-maven-3.5.3\lib\maven-shared-utils-3.2.1.jar

apache-maven-3.5.3\lib\maven-shared-utils.license

apache-maven-3.5.3\lib\maven-slf4j-provider-3.5.3.jar

apache-maven-3.5.3\lib\maven-slf4j-provider.license

apache-maven-3.5.3\lib\org.eclipse.sisu.inject-0.3.3.jar

apache-maven-3.5.3\lib\org.eclipse.sisu.inject.license

apache-maven-3.5.3\lib\org.eclipse.sisu.plexus-0.3.3.jar

apache-maven-3.5.3\lib\org.eclipse.sisu.plexus.license

apache-maven-3.5.3\lib\plexus-cipher-1.7.jar

apache-maven-3.5.3\lib\plexus-cipher.license

apache-maven-3.5.3\lib\plexus-component-annotations-1.7.1.jar

apache-maven-3.5.3\lib\plexus-component-annotations.license

apache-maven-3.5.3\lib\plexus-interpolation-1.24.jar

apache-maven-3.5.3\lib\plexus-interpolation.license

apache-maven-3.5.3\lib\plexus-sec-dispatcher-1.4.jar

apache-maven-3.5.3\lib\plexus-sec-dispatcher.license

apache-maven-3.5.3\lib\plexus-utils-3.1.0.jar

apache-maven-3.5.3\lib\plexus-utils.license

apache-maven-3.5.3\lib\slf4j-api-1.7.25.jar

apache-maven-3.5.3\lib\slf4j-api.license

apache-maven-3.5.3\lib\wagon-file-3.0.0.jar

apache-maven-3.5.3\lib\wagon-file.license

apache-maven-3.5.3\lib\wagon-http-3.0.0-shaded.jar

apache-maven-3.5.3\lib\wagon-http.license

apache-maven-3.5.3\lib\wagon-provider-api-3.0.0.jar

apache-maven-3.5.3\lib\wagon-provider-api.license

apache-maven-3.5.3\LICENSE

apache-maven-3.5.3\NOTICE

apache-maven-3.5.3\README.txt


                          Apache Maven

  What is it?
  -----------

  Maven is a software project management and comprehension tool. Based on
  the concept of a Project Object Model (POM), Maven can manage a project's
  build, reporting and documentation from a central piece of information.

  Documentation
  -------------

  The most up-to-date documentation can be found at https://maven.apache.org/.

  Release Notes
  -------------

  The full list of changes can be found at https://maven.apache.org/docs/history.html.

  System Requirements
  -------------------

  JDK:
    1.7 or above (this is to execute Maven - it still allows you to build against 1.3
    and prior JDK's).
  Memory:
    No minimum requirement.
  Disk:
    Approximately 10MB is required for the Maven installation itself. In addition to
    that, additional disk space will be used for your local Maven repository. The size
    of your local repository will vary depending on usage but expect at least 500MB.
  Operating System:
    Windows:
      Windows 2000 or above.
    Unix based systems (Linux, Solaris and Mac OS X) and others:
      No minimum requirement.

  Installing Maven
  ----------------

  1) Unpack the archive where you would like to store the binaries, e.g.:

    Unix-based operating systems (Linux, Solaris and Mac OS X)
      tar zxvf apache-maven-3.x.y.tar.gz
    Windows
      unzip apache-maven-3.x.y.zip

  2) A directory called "apache-maven-3.x.y" will be created.

  3) Add the bin directory to your PATH, e.g.:

    Unix-based operating systems (Linux, Solaris and Mac OS X)
      export PATH=/usr/local/apache-maven-3.x.y/bin:$PATH
    Windows
      set PATH="c:\program files\apache-maven-3.x.y\bin";%PATH%

  4) Make sure JAVA_HOME is set to the location of your JDK

  5) Run "mvn --version" to verify that it is correctly installed.

  For complete documentation, see https://maven.apache.org/download.html#Installation

  Licensing
  ---------

  Please see the file called LICENSE.

  Maven URLS
  ----------

  Home Page:          https://maven.apache.org/
  Downloads:          https://maven.apache.org/download.html
  Release Notes:      https://maven.apache.org/docs/history.html
  Mailing Lists:      https://maven.apache.org/mail-lists.html
  Source Code:        https://git-wip-us.apache.org/repos/asf/maven.git
  Issue Tracking:     https://issues.apache.org/jira/browse/MNG
  Wiki:               https://cwiki.apache.org/confluence/display/MAVEN/
  Available Plugins:  https://maven.apache.org/plugins/index.html

legal\LICENSE.txt

From: https://maven.apache.org/ref/3.0/license.html

-------

           Apache License
                           Version 2.0, January 2004
                        http://www.apache.org/licenses/

   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION

   1. Definitions.

      "License" shall mean the terms and conditions for use, reproduction,
      and distribution as defined by Sections 1 through 9 of this document.

      "Licensor" shall mean the copyright owner or entity authorized by
      the copyright owner that is granting the License.

      "Legal Entity" shall mean the union of the acting entity and all
      other entities that control, are controlled by, or are under common
      control with that entity. For the purposes of this definition,
      "control" means (i) the power, direct or indirect, to cause the
      direction or management of such entity, whether by contract or
      otherwise, or (ii) ownership of fifty percent (50%) or more of the
      outstanding shares, or (iii) beneficial ownership of such entity.

      "You" (or "Your") shall mean an individual or Legal Entity
      exercising permissions granted by this License.

      "Source" form shall mean the preferred form for making modifications,
      including but not limited to software source code, documentation
      source, and configuration files.

      "Object" form shall mean any form resulting from mechanical
      transformation or translation of a Source form, including but
      not limited to compiled object code, generated documentation,
      and conversions to other media types.

      "Work" shall mean the work of authorship, whether in Source or
      Object form, made available under the License, as indicated by a
      copyright notice that is included in or attached to the work
      (an example is provided in the Appendix below).

      "Derivative Works" shall mean any work, whether in Source or Object
      form, that is based on (or derived from) the Work and for which the
      editorial revisions, annotations, elaborations, or other modifications
      represent, as a whole, an original work of authorship. For the purposes
      of this License, Derivative Works shall not include works that remain
      separable from, or merely link (or bind by name) to the interfaces of,
      the Work and Derivative Works thereof.

      "Contribution" shall mean any work of authorship, including
      the original version of the Work and any modifications or additions
      to that Work or Derivative Works thereof, that is intentionally
      submitted to Licensor for inclusion in the Work by the copyright owner
      or by an individual or Legal Entity authorized to submit on behalf of
      the copyright owner. For the purposes of this definition, "submitted"
      means any form of electronic, verbal, or written communication sent
      to the Licensor or its representatives, including but not limited to
      communication on electronic mailing lists, source code control systems,
      and issue tracking systems that are managed by, or on behalf of, the
      Licensor for the purpose of discussing and improving the Work, but
      excluding communication that is conspicuously marked or otherwise
      designated in writing by the copyright owner as "Not a Contribution."

      "Contributor" shall mean Licensor and any individual or Legal Entity
      on behalf of whom a Contribution has been received by Licensor and
      subsequently incorporated within the Work.

   2. Grant of Copyright License. Subject to the terms and conditions of
      this License, each Contributor hereby grants to You a perpetual,
      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
      copyright license to reproduce, prepare Derivative Works of,
      publicly display, publicly perform, sublicense, and distribute the
      Work and such Derivative Works in Source or Object form.

   3. Grant of Patent License. Subject to the terms and conditions of
      this License, each Contributor hereby grants to You a perpetual,
      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
      (except as stated in this section) patent license to make, have made,
      use, offer to sell, sell, import, and otherwise transfer the Work,
      where such license applies only to those patent claims licensable
      by such Contributor that are necessarily infringed by their
      Contribution(s) alone or by combination of their Contribution(s)
      with the Work to which such Contribution(s) was submitted. If You
      institute patent litigation against any entity (including a
      cross-claim or counterclaim in a lawsuit) alleging that the Work
      or a Contribution incorporated within the Work constitutes direct
      or contributory patent infringement, then any patent licenses
      granted to You under this License for that Work shall terminate
      as of the date such litigation is filed.

   4. Redistribution. You may reproduce and distribute copies of the
      Work or Derivative Works thereof in any medium, with or without
      modifications, and in Source or Object form, provided that You
      meet the following conditions:

      (a) You must give any other recipients of the Work or
          Derivative Works a copy of this License; and

      (b) You must cause any modified files to carry prominent notices
          stating that You changed the files; and

      (c) You must retain, in the Source form of any Derivative Works
          that You distribute, all copyright, patent, trademark, and
          attribution notices from the Source form of the Work,
          excluding those notices that do not pertain to any part of
          the Derivative Works; and

      (d) If the Work includes a "NOTICE" text file as part of its
          distribution, then any Derivative Works that You distribute must
          include a readable copy of the attribution notices contained
          within such NOTICE file, excluding those notices that do not
          pertain to any part of the Derivative Works, in at least one
          of the following places: within a NOTICE text file distributed
          as part of the Derivative Works; within the Source form or
          documentation, if provided along with the Derivative Works; or,
          within a display generated by the Derivative Works, if and
          wherever such third-party notices normally appear. The contents
          of the NOTICE file are for informational purposes only and
          do not modify the License. You may add Your own attribution
          notices within Derivative Works that You distribute, alongside
          or as an addendum to the NOTICE text from the Work, provided
          that such additional attribution notices cannot be construed
          as modifying the License.

      You may add Your own copyright statement to Your modifications and
      may provide additional or different license terms and conditions
      for use, reproduction, or distribution of Your modifications, or
      for any such Derivative Works as a whole, provided Your use,
      reproduction, and distribution of the Work otherwise complies with
      the conditions stated in this License.

   5. Submission of Contributions. Unless You explicitly state otherwise,
      any Contribution intentionally submitted for inclusion in the Work
      by You to the Licensor shall be under the terms and conditions of
      this License, without any additional terms or conditions.
      Notwithstanding the above, nothing herein shall supersede or modify
      the terms of any separate license agreement you may have executed
      with Licensor regarding such Contributions.

   6. Trademarks. This License does not grant permission to use the trade
      names, trademarks, service marks, or product names of the Licensor,
      except as required for reasonable and customary use in describing the
      origin of the Work and reproducing the content of the NOTICE file.

   7. Disclaimer of Warranty. Unless required by applicable law or
      agreed to in writing, Licensor provides the Work (and each
      Contributor provides its Contributions) on an "AS IS" BASIS,
      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
      implied, including, without limitation, any warranties or conditions
      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
      PARTICULAR PURPOSE. You are solely responsible for determining the
      appropriateness of using or redistributing the Work and assume any
      risks associated with Your exercise of permissions under this License.

   8. Limitation of Liability. In no event and under no legal theory,
      whether in tort (including negligence), contract, or otherwise,
      unless required by applicable law (such as deliberate and grossly
      negligent acts) or agreed to in writing, shall any Contributor be
      liable to You for damages, including any direct, indirect, special,
      incidental, or consequential damages of any character arising as a
      result of this License or out of the use or inability to use the
      Work (including but not limited to damages for loss of goodwill,
      work stoppage, computer failure or malfunction, or any and all
      other commercial damages or losses), even if such Contributor
      has been advised of the possibility of such damages.

   9. Accepting Warranty or Additional Liability. While redistributing
      the Work or Derivative Works thereof, You may choose to offer,
      and charge a fee for, acceptance of support, warranty, indemnity,
      or other liability obligations and/or rights consistent with this
      License. However, in accepting such obligations, You may act only
      on Your own behalf and on Your sole responsibility, not on behalf
      of any other Contributor, and only if You agree to indemnify,
      defend, and hold each Contributor harmless for any liability
      incurred by, or claims asserted against, such Contributor by reason
      of your accepting any such warranty or additional liability.

   END OF TERMS AND CONDITIONS

   APPENDIX: How to apply the Apache License to your work.

      To apply the Apache License to your work, attach the following
      boilerplate notice, with the fields enclosed by brackets "[]"
      replaced with your own identifying information. (Don't include
      the brackets!)  The text should be enclosed in the appropriate
      comment syntax for the file format. We also recommend that a
      file or class name and description of purpose be included on the
      same "printed page" as the copyright notice for easier
      identification within third-party archives.

   Copyright [yyyy] [name of copyright owner]

   Licensed under the Apache License, Version 2.0 (the "License");
   you may not use this file except in compliance with the License.
   You may obtain a copy of the License at

       http://www.apache.org/licenses/LICENSE-2.0

   Unless required by applicable law or agreed to in writing, software
   distributed under the License is distributed on an "AS IS" BASIS,
   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
   See the License for the specific language governing permissions and
   limitations under the License.

legal\VERIFICATION.txt

VERIFICATION
Verification is intended to assist the Chocolatey moderators and community
in verifying that this package's contents are trustworthy.

1. Download the maven binary zip at
	x32: https://archive.apache.org/dist/maven/maven-3/3.5.3/binaries/apache-maven-3.5.3-bin.zip

2. Extract the maven zip

3. Compare the checksums of the files included in the maven zip with the checksums of the files in the maven directory in the nupkg.
A PowerShell (v4+) function to automate this comparison is below. It should return nothing if the directories have identical files, and return the difference if they are different. 

Function Compare-Directories {
	param(
		[string]$nuspecDir,
		[string]$checkDir
	)
    $nuspecDirHash = Get-ChildItem -Recurse -File -Path $nuspecDir | Get-FileHash -Algorithm SHA256
	$checkDirHash = Get-ChildItem -Recurse -File -Path $checkDir | Get-FileHash -Algorithm SHA256 
	Compare-Object -ReferenceObject $nuspecDirHash -DifferenceObject $checkDirHash -Property hash -PassThru
}

Compare-Directories -nuspecDir \path\to\extracted\nupkg\maven-directory -checkDir \path\to\extracted\maven\archive\

tools\chocolateybeforemodify.ps1

$ErrorActionPreference = 'Stop'
$toolsDir = Split-Path $MyInvocation.MyCommand.Definition
$installFolders = Split-Path $toolsDir
. $toolsDir\helpers.ps1

# Delete any folders from older versions before upgrading or uninstalling
Remove-PreviousVersions -installFolders $installFolders

tools\chocolateyinstall.ps1

$ErrorActionPreference = 'Stop'
$version = '3.5.3'
$name = "apache-maven-$version"
$toolsDir = Split-Path $MyInvocation.MyCommand.Definition
$installLocation = Join-Path (Split-Path $toolsDir) $name
$pathToAdd = Join-Path $installLocation 'bin'
$m2_repo = Join-Path $env:USERPROFILE '.m2'
. $toolsDir\helpers.ps1

New-Item -Path $m2_repo -Type directory -Force

# Clean Old Environment variables 
Uninstall-OldM2PathFromRegistry
Uninstall-ChocolateyEnvironmentVariable -VariableName 'M2_HOME' -VariableType Machine

# Adding to path instead of shimming; see comment: https://chocolatey.org/packages/maven#comment-4454809638
Install-ChocolateyPath -PathToInstall $pathToAdd -PathType 'Machine'

if (!(Get-Command javac.exe -ea 0)) {
    Show-JDKWarning
}

$env:ChocolateyPackageInstallLocation = $installLocation

tools\chocolateyuninstall.ps1

$ErrorActionPreference = 'Stop'
$toolsDir = Split-Path $MyInvocation.MyCommand.Definition
$installFolders = Split-Path $toolsDir
. $toolsDir\helpers.ps1

# Clean Old Environment variables 
Uninstall-OldM2PathFromRegistry
Uninstall-ChocolateyEnvironmentVariable -VariableName 'M2_HOME' -VariableType Machine

# Delete any folders from older versions before upgrading or uninstalling
Remove-PreviousVersions -installFolders $installFolders

tools\helpers.ps1

Function Uninstall-PathFromRegistry($pathToRemove) {
    # Using registry method prevents expansion (and loss) of environment variables (whether the target of the removal or not)
    # To avoid bad situations - does not use substring matching or regular expressions
    # Removes duplicates of the target removal path, Cleans up double ";", Handles ending "\"
    try {
        $regKey = [Microsoft.Win32.Registry]::LocalMachine.OpenSubKey('SYSTEM\CurrentControlSet\Control\Session Manager\Environment', $true)
        $unexpandedPath = $regKey.GetValue('Path', $null, 'DoNotExpandEnvironmentNames')

        foreach ($path in "$unexpandedPath".split(';')) {
            if ($pathToRemove -ine $path -and "$pathToRemove\" -ine $path) {
                [string[]]$newpath += "$path"
            }
        }
        $assembledNewPath = ($newpath -join (';')).trimend(';')

        $regKey.SetValue("Path", $assembledNewPath, "ExpandString")
    }
    finally {
        $regKey.Dispose()
    }
}

Function Uninstall-OldM2PathFromRegistry() {
    $pathToRemove = Join-Path '%M2_HOME%' 'bin'
    Uninstall-PathFromRegistry -pathToRemove $pathToRemove
}

Function Remove-PreviousVersions($installFolders) {
    $installs = Get-Childitem -Path $installFolders -Filter "apache-maven-*"
    
    $installs | ForEach-Object {
        Write-host "Removing old version $($_.name)"
        Uninstall-PathFromRegistry -pathToRemove (Join-Path $_.fullname 'bin')
        Remove-Item $_.fullname -Force -Recurse
    }
}

Function Show-JDKWarning () {
    Write-Output "**********************************************************************************"
    Write-Output "*                       !! No Java JDK detected on path !!                       *"
    Write-Output "*               Maven requires that a JDK be installed to function               *"
    Write-Output "*                                                                                *"
    Write-Output "*      However, this package does not take a dependency on any one specific      *"
    Write-Output "*          JDK package so as to not lock you into any specific JDK build         *"
    Write-Output "*                    Please separately install your JDK of choice                *"
    Write-Output "*                                                                                *"
    Write-Output "*See this issue on progress for the 'provides' nuspec element that will fix this:*"
    Write-Output "*                 https://github.com/chocolatey/choco/issues/858                 *"
    Write-Output "**********************************************************************************"
}

Virus Scan Results

jansi.dll (629af6e8e32d) - ## / 66
jansi.dll (3c130ad32a41) - ## / 64
maven.3.5.3.20220128.nupkg (5d13643e08ce) - ## / 57

In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).

Chocolatey Pro provides runtime protection from possible malware.

Version History

Version	Downloads	Last Updated	Status
Maven 3.9.9	34217	Saturday, August 17, 2024	Approved
Maven 3.9.8	21037	Monday, June 17, 2024	Approved
Maven 3.9.7	9633	Saturday, May 25, 2024	Approved
Maven 3.9.6	51011	Friday, December 1, 2023	Approved
Maven 3.9.5	19205	Thursday, October 5, 2023	Approved
Maven 3.9.4	21246	Thursday, August 3, 2023	Approved
Maven 3.9.3	14469	Monday, June 26, 2023	Approved
Maven 3.9.2	17285	Thursday, May 11, 2023	Approved
Maven 3.9.1	20835	Saturday, March 18, 2023	Approved
Maven 3.9.0	22258	Monday, February 6, 2023	Approved
Maven 3.8.7	74105	Saturday, December 31, 2022	Approved
Maven 3.8.6	95204	Saturday, June 11, 2022	Approved
Maven 3.8.5	49571	Sunday, March 13, 2022	Approved
Maven 3.8.4	56760	Saturday, November 20, 2021	Approved
Maven 3.8.3.20211022	12906	Friday, October 22, 2021	Approved
Maven 3.8.3	11068	Monday, October 4, 2021	Approved
Maven 3.8.2	46006	Saturday, August 14, 2021	Approved
Maven 3.8.1	49891	Saturday, April 10, 2021	Approved
Maven 3.6.3.20220128	235	Friday, January 28, 2022	Approved
Maven 3.6.3	323659	Sunday, December 1, 2019	Approved
Maven 3.6.2.20220128	121	Friday, January 28, 2022	Approved
Maven 3.6.2	31596	Friday, October 4, 2019	Approved
Maven 3.6.1.20220128	109	Friday, January 28, 2022	Approved
Maven 3.6.1.20190711	24259	Friday, July 19, 2019	Approved
Maven 3.6.1.20190624	7589	Wednesday, June 26, 2019	Approved
Maven 3.6.1	22193	Thursday, April 25, 2019	Approved
Maven 3.6.0.20220128	106	Friday, January 28, 2022	Approved
Maven 3.6.0	35556	Saturday, November 17, 2018	Approved
Maven 3.5.4.20220128	124	Friday, January 28, 2022	Approved
Maven 3.5.4	34567	Thursday, June 28, 2018	Approved
Maven 3.5.3.20220128	124	Friday, January 28, 2022	Approved
Maven 3.5.3	15342	Monday, April 2, 2018	Approved
Maven 3.5.2.20220128	109	Friday, January 28, 2022	Approved
Maven 3.5.2.2	6124	Wednesday, February 28, 2018	Approved
Maven 3.5.2.1	8070	Thursday, January 11, 2018	Approved
Maven 3.5.2	9878	Sunday, November 5, 2017	Approved
Maven 3.5.0.20220128	96	Friday, January 28, 2022	Approved
Maven 3.5.0	18630	Friday, May 5, 2017	Approved
Maven 3.3.9.20220128	134	Friday, January 28, 2022	Approved
Maven 3.3.9.2	11480	Saturday, February 25, 2017	Approved
Maven 3.3.9.1	17373	Tuesday, August 30, 2016	Approved
Maven 3.3.3.20220128	109	Friday, January 28, 2022	Approved
Maven 3.3.1.20220128	109	Friday, January 28, 2022	Approved
Maven 3.2.5.20220128	134	Friday, January 28, 2022	Approved
Maven 3.2.5	14336	Tuesday, February 10, 2015	Approved
Maven 3.2.3.20220128	117	Friday, January 28, 2022	Approved
Maven 3.2.2	130	Friday, January 28, 2022	Approved
Maven 3.2.1.20220128	107	Friday, January 28, 2022	Approved
Maven 3.1.1.20220128	101	Friday, January 28, 2022	Approved
Maven 3.1.0.20220128	109	Friday, January 28, 2022	Approved
Maven 3.1.0	119	Friday, January 28, 2022	Approved
Maven 3.0.5.20220128	107	Friday, January 28, 2022	Approved
Maven 3.0.5.20181117	516	Saturday, November 17, 2018	Approved
Maven 3.0.4.20220128	117	Friday, January 28, 2022	Approved
Maven 3.0.2	732	Wednesday, August 20, 2014	Approved

2002-2021 The Apache Software Foundation

Release Notes

https://maven.apache.org/docs/3.5.3/release-notes.html

Dependencies

This package has no dependencies.

Discussion for the Maven Package

Ground Rules:

This discussion is only about Maven and the Maven package. If you have feedback for Chocolatey, please contact the Google Group.
This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
Tell us what you love about the package or Maven, or tell us what needs improvement.
Share your experiences with the package, or extra configuration or gotchas that you've found.
If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.

Resources

Events

Courses

1,238,667

124

28 Jan 2022

Maven

Maven 3.5.3.20220128

All Checks are Passing

Deployment Method: Individual Install, Upgrade, & Uninstall

Deployment Method:

1. Enter Your Internal Repository Url

2. Setup Your Environment

1. Ensure you are set for organizational deployment

2. Get the package into your environment

3. Copy Your Script

4. If applicable - Chocolatey configuration/installation

Ground Rules: