Step 1: Review Your Packages

Step 2: Choose Your Integration Method

Step 3: Copy Your Script or Download Config

Option 1: Copy Script

Option 2: Download Config

Step 4: Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the packages and push them to a repository
  Download Packages

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the packages:
  Download Packages
- Follow manual internalization instructions
Package Internalizer (C4B)
- Run: (additional options)
- For package and dependencies run:
- Automate package internalization

Step 5: Copy Your Script

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###

#### We initialize a few things that are needed by this script - there are no other requirements.
$ErrorActionPreference = "Stop"

#### Set TLS 1.2 (3072) as that is the minimum required by various up-to-date repositories.
#### Use integers because the enumeration value for TLS 1.2 won't exist
#### in .NET 4.0, even though they are addressable if .NET 4.5+ is
#### installed (.NET 4.5 is an in-place upgrade).
[System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072

#### We use this variable for future REST calls.
$RequestArguments = @{
    UseBasicParsing = $true
}

## 2. TOP LEVEL VARIABLES ##

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# $NugetRepositoryCredential = [PSCredential]::new(
#     "username",
#     ("password" | ConvertTo-SecureString -AsPlainText -Force)
# )
# $RequestArguments.Credential = $NugetRepositoryCredential

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it
$ChocolateyDownloadUrl = "$($NugetRepositoryUrl.TrimEnd('/'))/package/chocolatey.2.4.3.nupkg"

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# $ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

#### Download the Nupkg, appending .zip to the filename to handle archive cmdlet limitations
if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    $TempDirectory = Join-Path $env:Temp "chocolateyInstall"
    if (-not (Test-Path $TempDirectory -PathType Container)) {
        $null = New-Item -Path $TempDirectory -ItemType Directory
    }
    $DownloadedNupkg = Join-Path $TempDirectory "$(Split-Path $ChocolateyDownloadUrl -Leaf).zip"
    Invoke-WebRequest -Uri $ChocolateyDownloadUrl -OutFile $DownloadedNupkg @RequestArguments

    #### Extract the Nupkg, and run the chocolateyInstall script
    if (Get-Command Microsoft.PowerShell.Archive\Expand-Archive -ErrorAction SilentlyContinue) {
        Microsoft.PowerShell.Archive\Expand-Archive -Path $DownloadedNupkg -DestinationPath $TempDirectory -Force
    } else {
        # PowerShell versions <4.0 do not have this function available
        try {
            $shellApplication = New-Object -ComObject Shell.Application
            $zipPackage = $shellApplication.NameSpace($DownloadedNupkg)
            $destinationFolder = $shellApplication.NameSpace($TempDirectory)
            $destinationFolder.CopyHere($zipPackage.Items(), 0x10)
        } catch {
            Write-Warning "Unable to unzip package using built-in compression."
            throw $_
        }
    }

    & $(Join-Path $TempDirectory "tools\chocolateyInstall.ps1")
}

if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    refreshenv
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# choco feature enable -n useFipsCompliantChecksums

### b. Apply Recommended Configuration ###
#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
choco config set --name cacheLocation --value C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
choco config set --name commandExecutionTimeoutSeconds --value 14400

#### Turn off download progress when running choco through integrations
choco feature disable --name showDownloadProgress

### c. Sources ###
#### Remove the default community package repository source
choco source list --limitoutput | ConvertFrom-Csv -Header 'Name', 'Location' -Delimiter '|' | ForEach-Object {
    if ($_.Location -eq 'https://community.chocolatey.org/api/v2/') {
        choco source remove -n $_.Name
    }
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
if ($NugetRepositoryCredential) {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --user $NugetRepositoryCredential.UserName --password $NugetRepositoryCredential.GetNetworkCredential().Password --priority 1
} else {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --priority 1
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
choco upgrade chocolatey --confirm

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
choco install chocolatey-license --source $NugetRepositoryUrl --confirm

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco source disable --name chocolatey.licensed
} else {
    Write-Warning "Not disabling 'chocolatey.licensed' feed, as Chocolatey-License has not been installed."
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco install chocolatey.extension --source $NugetRepositoryUrl --confirm
} else {
    Write-Warning "Not installing 'chocolatey.extension', as Chocolatey-License has not been installed."
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
choco feature disable --name showNonElevatedWarnings
choco feature enable --name useBackgroundService
choco feature enable --name useBackgroundServiceWithNonAdministratorsOnly
choco feature enable --name allowBackgroundServiceUninstallsFromUserInstallsOnly
choco config set --name allowedBackgroundServiceCommands --value "install,upgrade,uninstall"

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if ($ChocolateyCentralManagementUrl) {
    choco install chocolatey-agent --source $NugetRepositoryUrl --confirm
    choco config set --name CentralManagementServiceUrl --value $ChocolateyCentralManagementUrl
    if ($ChocolateyCentralManagementClientSalt) {
        choco config set --name centralManagementClientCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementClientSalt
    }
    if ($ChocolateyCentralManagementServiceSalt) {
        choco config set --name centralManagementServiceCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementServiceSalt
    }
    choco feature enable --name useChocolateyCentralManagement
    choco feature enable --name useChocolateyCentralManagementDeployments
}

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. chocolatey.chocolatey
##### You will require the chocolatey.chocolatey collection to be installed
##### on all machines using this playbook.
##### Please see https://github.com/chocolatey/chocolatey-ansible/#installing-the-collection-from-ansible-galaxy

- name: Install and Configure Chocolatey
  hosts: all

## 2. TOP LEVEL VARIABLES ##
  vars:

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
    nuget_repository_url: INTERNAL REPO URL

### b. Internal Repository Credential ###
#### If required, add the repository access credential here and
#### uncomment lines with source_username and source_password below
#    nuget_repository_username: username
#    nuget_repository_password: password

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#    chocolatey_central_management_url: https://chocolatey-central-management:24020/ChocolateyManagementService

#### ii. If using a Client Salt, add it here
#    chocolatey_central_management_client_salt: clientsalt

#### iii. If using a Service Salt, add it here
#    chocolatey_central_management_service_salt: servicesalt

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

  tasks:
  - name: Install chocolatey
    win_chocolatey:
      name: chocolatey
      source: ""{{ nuget_repository_url }}""
      # source_username: ""{{ nuget_repository_username }}""
      # source_password: ""{{ nuget_repository_password }}""

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#   - name: Enable FIPS compliance
#     win_chocolatey_feature:
#       name: useFipsCompliantChecksums
#       state: enabled

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
  - name: Set the cache location
    win_chocolatey_config:
      name: cacheLocation
      state: present
      value: C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
  - name: Set the command execution timeout
    win_chocolatey_config:
      name: commandExecutionTimeoutSeconds
      state: present
      value: 14400

#### Turn off download progress when running choco through integrations
  - name: Disable showing download progress
    win_chocolatey_feature:
      name: showDownloadProgress
      state: disabled

### c. Sources ###
#### Remove the default community package repository source
  - name: Remove Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey
      state: absent

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here
#### NOTE: This EXAMPLE may require changes
  - name: Add Internal Repository
    win_chocolatey_source:
      name: ChocolateyInternal
      state: present
      source: {{ nuget_repository_url }}
      # source_username: {{ nuget_repository_username }}
      # source_password: {{ nuget_repository_password }}
      priority: 1

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
  - name: Upgrade Chocolatey
    win_chocolatey:
      name: chocolatey
      state: latest

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.
### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
  - name: Install Chocolatey License
    win_chocolatey:
      name: chocolatey-license
      source: ChocolateyInternal
      state: latest

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
  - name: Disable Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey.licensed
      state: disabled

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
  - name: Install Chocolatey Extension
    win_chocolatey:
      name: chocolatey.extension
      source: ChocolateyInternal
      state: latest

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
  - name: Hide not-elevated warnings
    win_chocolatey_feature:
      name: showNonElevatedWarnings
      state: disabled

  - name: Use background mode for self-service
    win_chocolatey_feature:
      name: useBackgroundService
      state: enabled

  - name: Use background service for non-admins
    win_chocolatey_feature:
      name: useBackgroundServiceWithNonAdministratorsOnly
      state: enabled

  - name: Allow background uninstallation for user installs
    win_chocolatey_feature:
      name: allowBackgroundServiceUninstallsFromUserInstallsOnly
      state: enabled

  - name: Set allowed background service commands
    win_chocolatey_config:
      name: backgroundServiceAllowedCommands
      state: present
      value: install,upgrade,uninstall

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
  - name: Install Chocolatey Agent
    when: chocolatey_central_management_url is defined
    win_chocolatey:
      name: chocolatey-agent
      source: ChocolateyInternal
      state: latest

  - name: Set the Central Management Service URL
    when: chocolatey_central_management_url is defined
    win_chocolatey_config:
      name: CentralManagementServiceUrl
      state: present
      value: {{ chocolatey_central_management_url }}

  - name: Set the Central Management Client Salt
    when: chocolatey_central_management_client_salt is defined
    win_chocolatey_config:
      name: centralManagementClientCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_client_salt }}

  - name: Set the Central Management Service Salt
    when: chocolatey_central_management_service_salt is defined
    win_chocolatey_config:
      name: centralManagementServiceCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_service_salt }}

  - name: Use Central Management
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagement
      state: enabled

  - name: Use Central Management Deployments
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagementDeployments
      state: enabled

See docs at https://docs.chef.io/resource_chocolatey_package.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### The Chocolatey resources are available with any recent version of Chef.
#### We utilise the Chocolatey recipe to install the Chocolatey binaries.
include_recipe "chocolatey"

## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# NugetRepositoryUsername = "username"
# NugetRepositoryPassword = "password"

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
ChocolateyNupkgUrl = "INTERNAL REPO URL/package/chocolatey.2.4.3.nupkg",

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
node['chocolatey']['install vars'] = {
  'chocolateyDownloadUrl' => "#{ChocolateyNupkgUrl}",
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# chocolatey_feature 'useFipsCompliantChecksums' do
#   action :enable
# end

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolatey_config 'cacheLocation' do
  value 'C:\ProgramData\chocolatey\cache'
end

#### Increase timeout to at least 4 hours
chocolatey_config 'commandExecutionTimeoutSeconds' do
  value '14400'
end

#### Turn off download progress when running choco through integrations
chocolatey_feature 'showDownloadProgress' do
  action :disable
end

### c. Sources ###
#### Remove the default community package repository source
chocolatey_source 'chocolatey' do
  action :remove
end

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
chocolatey_source 'ChocolateyInternal' do
  source "#{NugetRepositoryUrl}"
  priority 1
  action   :add
end

execute 'ChocolateyInternal' do
  command "choco source add --name ChocolateyInternal -s #{NugetRepositoryUrl} -u=#{NugetRepositoryUsername} -p=#{NugetRepositoryPassword} --priority=1"
  only_if { NugetRepositoryUsername != nil || NugetRepositoryPassword != nil }
end

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
chocolatey_package 'chocolatey' do
  action :upgrade
  source "#{NugetRepositoryUrl}"
end

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
chocolatey_package 'chocolatey-license' do
  action :install
  source "#{NugetRepositoryUrl}"
end

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
chocolatey_source 'chocolatey.licensed' do
  action            :disable
end

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
chocolatey_package 'chocolatey.extention' do
  action     install
  source     "#{NugetRepositoryUrl}"
end

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolatey_feature 'showNonElevatedWarnings' do
  action :disable
end

chocolatey_feature 'useBackgroundService' do
  action :enable
end

chocolatey_feature 'useBackgroundServiceWithNonAdministratorsOnly' do
  action :enable
end

chocolatey_feature 'allowBackgroundServiceUninstallsFromUserInstallsOnly' do
  action :enable
end

chocolatey_config 'backgroundServiceAllowedCommands' do
  value 'install,upgrade,uninstall'
end

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
chocolatey_package 'chocolatey-agent' do
  action     install
  source     "#{NugetRepositoryUrl}"
  # user       "#{NugetRepositoryUsername}"
  # password   "#{NugetRepositoryPassword}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'CentralManagementServiceUrl' do
  value  "#{ChocolateyCentralManagementUrl}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'centralManagementClientCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementClientSalt}"
  only_if { ChocolateyCentralManagementClientSalt != nil }
end

chocolatey_config 'centralManagementServiceCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementServiceSalt}"
  only_if { ChocolateyCentralManagementServiceSalt != nil }
end

chocolatey_feature 'useChocolateyCentralManagement' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_feature 'useChocolateyCentralManagementDeployments' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.

If Applicable - Chocolatey Configuration/Installation


#requires -Modules cChoco
## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires chocolatey\cChoco DSC module to be installed on the machine compiling the DSC manifest
#### NOTE: This will need to be installed before running the DSC portion of this script
if (-not (Get-Module cChoco -ListAvailable)) {
    $null = Install-PackageProvider -Name NuGet -MinimumVersion 2.8.5.201 -Force
    if (($PSGallery = Get-PSRepository -Name PSGallery).InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy Trusted
    }
    Install-Module -Name cChoco
    if ($PSGallery.InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy $PSGallery.InstallationPolicy
    }
}

#### ii. Requires a hosted copy of the install.ps1 script
##### This should be available to download without authentication.
##### The original script can be found here: https://community.chocolatey.org/install.ps1

Configuration ChocolateyConfig {
## 2. TOP LEVEL VARIABLES ##
    param(
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
        $NugetRepositoryUrl      = "INTERNAL REPO URL",

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
        $ChocolateyNupkgUrl      = "INTERNAL REPO URL/package/chocolatey.2.4.3.nupkg",

### c. Internal Repository Credential ###
#### If required, add the repository access credential here
#        $NugetRepositoryCredential = [PSCredential]::new(
#            "username",
#            ("password" | ConvertTo-SecureString -AsPlainText -Force)
#        ),

### d. Install.ps1 URL
#### The path to the hosted install script:
        $ChocolateyInstallPs1Url = "https://community.chocolatey.org/install.ps1"

### e. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#        $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService",

#### ii. If using a Client Salt, add it here
#        $ChocolateyCentralManagementClientSalt = "clientsalt",

#### iii. If using a Service Salt, add it here
#        $ChocolateyCentralManagementServiceSalt = "servicesalt"
    )
    Import-DscResource -ModuleName PSDesiredStateConfiguration
    Import-DscResource -ModuleName cChoco

    Node 'localhost' {
## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
        Environment chocoDownloadUrl {
            Name  = "chocolateyDownloadUrl"
            Value = $ChocolateyNupkgUrl
        }

        cChocoInstaller installChocolatey {
            DependsOn = "[Environment]chocoDownloadUrl"
            InstallDir = Join-Path $env:ProgramData "chocolatey"
            ChocoInstallScriptUrl = $ChocolateyInstallPs1Url
        }

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#        cChocoFeature featureFipsCompliance {
#            FeatureName = "useFipsCompliantChecksums"
#        }

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
        cChocoConfig cacheLocation {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "cacheLocation"
            Value      = "C:\ProgramData\chocolatey\cache"
        }

#### Increase timeout to at least 4 hours
        cChocoConfig commandExecutionTimeoutSeconds {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "commandExecutionTimeoutSeconds"
            Value      = 14400
        }

#### Turn off download progress when running choco through integrations
        cChocoFeature showDownloadProgress {
            DependsOn   = "[cChocoInstaller]installChocolatey"
            FeatureName = "showDownloadProgress"
            Ensure      = "Absent"
        }

### c. Sources ###
#### Remove the default community package repository source
        cChocoSource removeCommunityRepository {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name       = "chocolatey"
            Ensure     = "Absent"
        }

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here.
#### NOTE: This EXAMPLE may require changes
        cChocoSource addInternalSource {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name        = "ChocolateyInternal"
            Source      = $NugetRepositoryUrl
            Credentials = $NugetRepositoryCredential
            Priority    = 1
        }

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
        cChocoPackageInstaller updateChocolatey {
            DependsOn   = "[cChocoSource]addInternalSource", "[cChocoSource]removeCommunityRepository"
            Name        = "chocolatey"
            AutoUpgrade = $true
        }

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
        cChocoPackageInstaller chocolateyLicense {
            DependsOn = "[cChocoPackageInstaller]updateChocolatey"
            Name      = "chocolatey-license"
        }

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
        Script disableLicensedSource {
            DependsOn  = "[cChocoPackageInstaller]chocolateyLicense"
            GetScript  = {
                $Source = choco source list --limitoutput | `
                    ConvertFrom-Csv -Delimiter '|' -Header Name, Source, Disabled | `
                    Where-Object Name -eq "chocolatey.licensed"

                return @{
                    Result = if ($Source) {
                        [bool]::Parse($Source.Disabled)
                    } else {
                        Write-Warning "Source 'chocolatey.licensed' was not present."
                        $true  # Source does not need disabling
                    }
                }
            }
            SetScript  = {
                $null = choco source disable --name "chocolatey.licensed"
            }
            TestScript = {
                $State = [ScriptBlock]::Create($GetScript).Invoke()
                return $State.Result
            }
        }

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
        cChocoPackageInstaller chocolateyLicensedExtension {
            DependsOn = "[Script]disableLicensedSource"
            Name      = "chocolatey.extension"
        }

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
        cChocoFeature hideElevatedWarnings {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "showNonElevatedWarnings"
            Ensure      = "Absent"
        }

        cChocoFeature useBackgroundService {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundService"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceWithNonAdmins {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundServiceWithNonAdministratorsOnly"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceUninstallsForUserInstalls {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "allowBackgroundServiceUninstallsFromUserInstallsOnly"
            Ensure      = "Present"
        }

        cChocoConfig allowedBackgroundServiceCommands {
            DependsOn   = "[cChocoFeature]useBackgroundService"
            ConfigName = "backgroundServiceAllowedCommands"
            Value       = "install,upgrade,uninstall"
        }

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
        if ($ChocolateyCentralManagementUrl) {
            cChocoPackageInstaller chocolateyAgent {
                DependsOn = "[cChocoPackageInstaller]chocolateyLicensedExtension"
                Name      = "chocolatey-agent"
            }

            cChocoConfig centralManagementServiceUrl {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                ConfigName = "CentralManagementServiceUrl"
                Value       = $ChocolateyCentralManagementUrl
            }

            if ($ChocolateyCentralManagementClientSalt) {
                cChocoConfig centralManagementClientSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementClientCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementClientSalt
                }
            }

            if ($ChocolateyCentralManagementServiceSalt) {
                cChocoConfig centralManagementServiceSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementServiceCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementServiceSalt
                }
            }

            cChocoFeature useCentralManagement {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagement"
                Ensure      = "Present"
            }

            cChocoFeature useCentralManagementDeployments {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagementDeployments"
                Ensure      = "Present"
            }
        }
    }
}

# If working this into an existing configuration with a good method for
$ConfigData = @{
    AllNodes = @(
        @{
            NodeName                    = "localhost"
            PSDscAllowPlainTextPassword = $true
        }
    )
}

try {
    Push-Location $env:Temp
    $Config = ChocolateyConfig -ConfigurationData $ConfigData
    Start-DscConfiguration -Path $Config.PSParentPath -Wait -Verbose -Force
} finally {
    Pop-Location
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires puppetlabs/chocolatey module
####  See https://forge.puppet.com/puppetlabs/chocolatey


## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$_repository_url = 'INTERNAL REPO URL'

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
$_choco_download_url = 'INTERNAL REPO URL/package/chocolatey.2.4.3.nupkg'

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $_chocolatey_central_management_url = 'https://chocolatey-central-management:24020/ChocolateyManagementService'

#### ii. If using a Client Salt, add it here
# $_chocolatey_central_management_client_salt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $_chocolatey_central_management_service_salt = 'servicesalt'


## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
### Note: `chocolatey_download_url is completely different than normal
###  source locations. This is directly to the bare download url for the
###  chocolatey.nupkg, similar to what you see when you browse to
###  https://community.chocolatey.org/api/v2/package/chocolatey
class {'chocolatey':
  chocolatey_download_url => $_choco_download_url,
  use_7zip                => false,
}


## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations

#chocolateyfeature {'useFipsCompliantChecksums':
#  ensure => enabled,
#}

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolateyconfig {'cacheLocation':
  value => 'C:\ProgramData\chocolatey\cache',
}

#### Increase timeout to at least 4 hours
chocolateyconfig {'commandExecutionTimeoutSeconds':
  value => '14400',
}

#### Turn off download progress when running choco through integrations
chocolateyfeature {'showDownloadProgress':
  ensure => disabled,
}

### c. Sources ###
#### Remove the default community package repository source
chocolateysource {'chocolatey':
  ensure   => absent,
  location => 'https://community.chocolatey.org/api/v2/',
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE requires changes
chocolateysource {'internal_chocolatey':
  ensure             => present,
  location           => $_repository_url,
  priority           => 1,
  username           => 'optional',
  password           => 'optional,not ensured',
  bypass_proxy       => true,
  admin_only         => false,
  allow_self_service => false,
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/

package {'chocolatey':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}


## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/guides/organizations/organizational-deployment-guide#exercise-4-create-a-package-for-the-license

# TODO: Add resource for installing/ensuring the chocolatey-license package
package {'chocolatey-license':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
## Disabled sources still need all other attributes until
## https://tickets.puppetlabs.com/browse/MODULES-4449 is resolved.
## Password is necessary with user, but not ensurable, so it should not
## matter what it is set to here. If you ever do get into trouble here,
## the password is your license GUID.
chocolateysource {'chocolatey.licensed':
  ensure   => disabled,
  priority => '10',
  user     => 'customer',
  password => '1234',
  require  => Package['chocolatey-license'],
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
package {'chocolatey.extension':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
  require  => Package['chocolatey-license'],
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolateyfeature {'showNonElevatedWarnings':
  ensure => disabled,
}

chocolateyfeature {'useBackgroundService':
  ensure => enabled,
}

chocolateyfeature {'useBackgroundServiceWithNonAdministratorsOnly':
  ensure => enabled,
}

chocolateyfeature {'allowBackgroundServiceUninstallsFromUserInstallsOnly':
  ensure => enabled,
}

chocolateyconfig {'backgroundServiceAllowedCommands':
  value => 'install,upgrade,uninstall',
}

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if $_chocolatey_central_management_url {
  package {'chocolatey-agent':
    ensure   => latest,
    provider => chocolatey,
    source   => $_repository_url,
    require  => Package['chocolatey-license'],
  }

  chocolateyconfig {'CentralManagementServiceUrl':
    value   => $_chocolatey_central_management_url,
  }

  if $_chocolatey_central_management_client_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  if $_chocolatey_central_management_service_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  chocolateyfeature {'useChocolateyCentralManagement':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }

  chocolateyfeature {'useChocolateyCentralManagementDeployments':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }
}

Need Help? View our docs or file an issue.

There is already a version of this package in your Script Builder

Current Version	New Version

Downloads:

991,583

Downloads of v 3.5.8080.0:

57,604

Last Update:

28 Feb 2022

Package Maintainer(s):

Software Author(s):

Microsoft

Tags:

SQL Server Compact 3.5 with SP2

3.5.8080.0 | Updated: 28 Feb 2022

Downloads:

991,583

Downloads of v 3.5.8080.0:

57,604

Maintainer(s):

Software Author(s):

Microsoft

Tags:

sql server compact sql-server mssql mssqlce sqlce microsoft

SQL Server Compact 3.5 with SP2 3.5.8080.0

Legal Disclaimer: Neither this package nor Chocolatey Software, Inc. are affiliated with or endorsed by Microsoft. The inclusion of Microsoft trademark(s), if any, upon this webpage is solely to identify Microsoft goods or services and not for commercial purposes.

All Checks are Passing

3 Passing Tests

Show Checks

Validation Testing Passed

Verification Testing Passed

Details

Scan Testing Successful:

No detections found in any package files

Details

Learn More

Deployment Method: Individual Install, Upgrade, & Uninstall

To install SQL Server Compact 3.5 with SP2, run the following command from the command line or from PowerShell:

To upgrade SQL Server Compact 3.5 with SP2, run the following command from the command line or from PowerShell:

To uninstall SQL Server Compact 3.5 with SP2, run the following command from the command line or from PowerShell:

NOTE

This applies to both open source and commercial editions of Chocolatey.

1. Enter Your Internal Repository Url

(this should look similar to https://community.chocolatey.org/api/v2/)

2. Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the package and push it to a repository Download

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the package:
  Download
- Follow manual internalization instructions

Package Internalizer (C4B)

Run: (additional options)

choco download mssqlserver-compact3.5 --internalize --source=https://community.chocolatey.org/api/v2/

For package and dependencies run:

choco push --source="'INTERNAL REPO URL'"

Automate package internalization

3. Copy Your Script

choco upgrade mssqlserver-compact3.5 -y --source="'INTERNAL REPO URL'" [other options]

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:


choco upgrade mssqlserver-compact3.5 -y --source="'INTERNAL REPO URL'" 
$exitCode = $LASTEXITCODE

Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
  Exit 0
}

Exit $exitCode


- name: Install mssqlserver-compact3.5
  win_chocolatey:
    name: mssqlserver-compact3.5
    version: '3.5.8080.0'
    source: INTERNAL REPO URL
    state: present

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.


chocolatey_package 'mssqlserver-compact3.5' do
  action    :install
  source   'INTERNAL REPO URL'
  version  '3.5.8080.0'
end

See docs at https://docs.chef.io/resource_chocolatey_package.html.


cChocoPackageInstaller mssqlserver-compact3.5
{
    Name     = "mssqlserver-compact3.5"
    Version  = "3.5.8080.0"
    Source   = "INTERNAL REPO URL"
}

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.


package { 'mssqlserver-compact3.5':
  ensure   => '3.5.8080.0',
  provider => 'chocolatey',
  source   => 'INTERNAL REPO URL',
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

4. If applicable - Chocolatey configuration/installation

See infrastructure management matrix for Chocolatey configuration elements and examples.

Package Approved

This package was approved by moderator gep13 on 18 Apr 2022.

Description

SQL Server Compact 3.5 SP2 is an embedded database that allows developers to build robust applications for Windows desktops and mobile devices. The download contains the files for installing SQL Server Compact 3.5 SP2 and Synchronization Services for ADO.NET version 1.0 SP1 on Windows desktop.

SQL Server Compact 3.5 SP2 includes a host of new features including the following:

-Support for the Transact-SQL Editor in Visual Studio 2010 that can be used to run free-text T-SQL queries and to view query show-plans for optimizing queries.
-Exposes the Change Tracking feature as an application programming interface (API), namely, System.Data.SqlServerCe.SqlCeChangeTracking. The new Change Tracking API provides the ability to configure, enable, and disable change tracking on a table, and to access the change tracking data for the table.
-New assembly versioning support and directory structure that enables the SQL Server Compact applications that use private deployment to load SQL Server Compact assemblies from within the application folder if they are of a higher version than that in the global assembly cache (GAC).
-Support added for deploying the 64-bit version of SQL Server Compact using the ClickOnce deployment.
-Synchronization Services for ADO.NET v1.0 providing the ability to synchronize data from disparate sources over two-tier, N-tier, and service-based architectures.

Package Parameters

The language package parameter can be set to install the package with the specified language. If no language is
specified the install will default to English.

/language=[language-code] - installs the package using the specified language. Supported languages are:
- br - Brazilian (Portuguese) - --params '"/language=br"'
- de - German - --params '"/language=de"'
- en - English - --params '"/language=en"'
- es - Spanish - --params '"/language=es"'
- fr - French - --params '"/language=fr"'
- it - Italian - --params '"/language=it"'
- ja - Japanese - --params '"/language=ja"'
- ko - Korean - --params '"/language=ko"'
- ru - Russian - --params '"/language=ru"'
- zh - Chinese (Simplified) - --params '"/language=zh"'
- zh-CN - Chinese (Simplified) - --params '"/language=zh-CN"'
- zh-TW - Chinese (Tradition) - --params '"/language=gz-TW"'

For example: choco install mssqlserver-compact3.5 --params '"/language=fr"' to install the French version of the package

Notes

This package is manually updated
If this package is outdated, please use "Contact Maintainers" to contact the maintainer(s)

Files

legal\LICENSE.txt

From: https://www.microsoft.com/en-us/download/details.aspx?id=5783

SQL Server Compact 3.5 SP2 is freely redistributable under a redistribution license agreement. Application developers redistributing SQL Server Compact 3.5 SP2 can optionally register at the SQL Server Compact redistribution site. Registering will help the developers in getting information about SQL Server Compact critical security patches and hot fixes that can be further applied to the client installations.

From: EULA_ENU.rtf (inside install directory)

MICROSOFT SOFTWARE LICENSE TERMS
MICROSOFT SQL SERVER COMPACT 3.5 WITH SERVICE PACK 2
These license terms are an agreement between Microsoft Corporation (or based on where you live, one of its affiliates) and you.  Please read them.  They apply to the software named above, which includes the media on which you received it, if any.  The terms also apply to any Microsoft
•	updates,
•	supplements,
•	Internet-based services, and 
•	support services
for this software, unless other terms accompany those items.  If so, those terms apply.
BY USING THE SOFTWARE, YOU ACCEPT THESE TERMS.  IF YOU DO NOT ACCEPT THEM, DO NOT USE THE SOFTWARE.
If you comply with these license terms, you have the rights below.
1.	INSTALLATION AND USE RIGHTS.  You may install and use any number of copies of the software on your devices.
2.	ADDITIONAL LICENSING REQUIREMENTS AND/OR USE RIGHTS.
a.	Distributable Code.  The software contains code that you are permitted to distribute in programs you develop if you comply with the terms below.
i.	Right to Use and Distribute.  The code and text files listed below are “Distributable Code.”
•	REDIST.TXT Files.  You may copy and distribute the object code form of code listed in REDIST.TXT files.
•	Third Party Distribution.  You may permit distributors of your programs to copy and distribute the Distributable Code as part of those programs.
ii.	Distribution Requirements.  For any Distributable Code you distribute, you must
•	add significant primary functionality to it in your programs;
•	require distributors and external end users to agree to terms that protect it at least as much as this agreement; 
•	display your valid copyright notice on your programs; and
•	indemnify, defend, and hold harmless Microsoft from any claims, including attorneys’ fees, related to the distribution or use of your programs.
iii.	Distribution Restrictions.  You may not
•	alter any copyright, trademark or patent notice in the Distributable Code; 
•	use Microsoft’s trademarks in your programs’ names or in a way that suggests your programs come from or are endorsed by Microsoft; 
•	distribute Distributable Code to run on a platform other than the Windows platform;
•	include Distributable Code in malicious, deceptive or unlawful programs; or
•	modify or distribute the source code of any Distributable Code so that any part of it becomes subject to an Excluded License.  An Excluded License is one that requires, as a condition of use, modification or distribution, that
•	the code be disclosed or distributed in source code form; or 
•	others have the right to modify it.
3.	SCOPE OF LICENSE.  The software is licensed, not sold.  This agreement only gives you some rights to use the software.  Microsoft reserves all other rights.  Unless applicable law gives you more rights despite this limitation, you may use the software only as expressly permitted in this agreement.  In doing so, you must comply with any technical limitations in the software that only allow you to use it in certain ways.  You may not
•	work around any technical limitations in the software;
•	reverse engineer, decompile or disassemble the software, except and only to the extent that applicable law expressly permits, despite this limitation;
•	make more copies of the software than specified in this agreement or allowed by applicable law, despite this limitation;
•	publish the software for others to copy;
•	rent, lease or lend the software; or
•	use the software for commercial software hosting services.
4.	BACKUP COPY.  You may make one backup copy of the software.  You may use it only to reinstall the software.
5.	DOCUMENTATION.  Any person that has valid access to your computer or internal network may copy and use the documentation for your internal, reference purposes.
6.	TRANSFER TO A THIRD PARTY.  The first user of the software may transfer it and this agreement directly to a third party.  Before the transfer, that party must agree that this agreement applies to the transfer and use of the software.  The first user must uninstall the software before transferring it separately from the device.  The first user may not retain any copies.
7.	EXPORT RESTRICTIONS.  The software is subject to United States export laws and regulations.  You must comply with all domestic and international export laws and regulations that apply to the software.  These laws include restrictions on destinations, end users and end use.  For additional information, see www.microsoft.com/exporting.
8.	SUPPORT SERVICES.  Because this software is “as is,” we may not provide support services for it.
9.	ENTIRE AGREEMENT.  This agreement, and the terms for supplements, updates, Internet-based services and support services that you use, are the entire agreement for the software and support services.
10.	APPLICABLE LAW.
a.	United States.  If you acquired the software in the United States, Washington state law governs the interpretation of this agreement and applies to claims for breach of it, regardless of conflict of laws principles.  The laws of the state where you live govern all other claims, including claims under state consumer protection laws, unfair competition laws, and in tort.
b.	Outside the United States.  If you acquired the software in any other country, the laws of that country apply.
11.	LEGAL EFFECT.  This agreement describes certain legal rights.  You may have other rights under the laws of your country.  You may also have rights with respect to the party from whom you acquired the software.  This agreement does not change your rights under the laws of your country if the laws of your country do not permit it to do so.
12.	DISCLAIMER OF WARRANTY.  THE SOFTWARE IS LICENSED “AS-IS.”  YOU BEAR THE RISK OF USING IT.  MICROSOFT GIVES NO EXPRESS WARRANTIES, GUARANTEES OR CONDITIONS.  YOU MAY HAVE ADDITIONAL CONSUMER RIGHTS UNDER YOUR LOCAL LAWS WHICH THIS AGREEMENT CANNOT CHANGE.  TO THE EXTENT PERMITTED UNDER YOUR LOCAL LAWS, MICROSOFT EXCLUDES THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
13.	LIMITATION ON AND EXCLUSION OF REMEDIES AND DAMAGES.  YOU CAN RECOVER FROM MICROSOFT AND ITS SUPPLIERS ONLY DIRECT DAMAGES UP TO U.S. $5.00.  YOU CANNOT RECOVER ANY OTHER DAMAGES, INCLUDING CONSEQUENTIAL, LOST PROFITS, SPECIAL, INDIRECT OR INCIDENTAL DAMAGES.
This limitation applies to
•	anything related to the software, services, content (including code) on third party Internet sites, or third party programs; and
•	claims for breach of contract, breach of warranty, guarantee or condition, strict liability, negligence, or other tort to the extent permitted by applicable law.
It also applies even if Microsoft knew or should have known about the possibility of the damages.  The above limitation or exclusion may not apply to you because your country may not allow the exclusion or limitation of incidental, consequential or other damages.

From REDIST_ENU.txt (inside install directory)

The listed .msi files each install its enclosed components to a specific location on the destination computer.  This helps to ensure serviceability and technical support.  The .dll files enclosed in these .msi files are also available separately in this redist.txt.  However, distributions of these separate .dlls may result in issues of serviceability.  For more details, please see http://go.microsoft.com/fwlink/?LinkId=94589

Private deployment detection via BreadCrumb:  Private deployment of just the native stack and explicit loading of SQL Server Compact Assembly via Assembly.LoadFrom(), .local file, or the use of DLL/COM redirection strategies are not supported and may result in serviceability issues.  For more information see http://support.microsoft.com/kb/835322 and http://msdn2.microsoft.com/en-us/library/aa375142.aspx

Microsoft SQL Server Compact 3.5 SP2 
------------------------------------
SSCERuntime-ENU.msi
SSCERuntime-DEU.msi
SSCERuntime-FRA.msi
SSCERuntime-JPN.msi
SSCERuntime-RUS.msi
SSCERuntime-ESN.msi
SSCERuntime-ITA.msi
SSCERuntime-KOR.msi
SSCERuntime-CHT.msi
SSCERuntime-CHS.msi
sqlcese35.dll
sqlceqp35.dll
sqlceoledb35.dll
sqlceca35.dll
sqlceme35.dll
sqlcecompact35.dll
sqlceer35en.dll
sqlceer35cn.dll/sqlceer35zh-CHS.dll
sqlceer35de.dll 
sqlceer35es.dll 
sqlceer35fr.dll 
sqlceer35it.dll 
sqlceer35ja.dll 
sqlceer35ko.dll 
sqlceer35tw.dll/sqlceer35zh-CHT.dll 
sqlceer35ru.dll
System.Data.SqlServerCe.dll

Microsoft Synchronization Services for ADO.NET v1.0 SP1
-------------------------------------------------------
Microsoft.Synchronization.Data.dll
Microsoft.Synchronization.Data.Server.dll
Microsoft.Synchronization.Data.SqlServerCe.dll
Microsoft.Synchronization.Data.resources.dll

The listed .cab files each install its enclosed components to a specific location on the destination mobile device.  This helps to ensure serviceability and technical support.  The .dll and exe files enclosed in these .cab files are also available separately in this redist.txt.  However, distributions of these separate .dlls and exes may result in issues of serviceability.  For more details, please see http://go.microsoft.com/fwlink/?LinkId=94589

Microsoft SQL Server Compact 3.5 SP2 
------------------------------------
sqlcese35.dll
sqlceqp35.dll
sqlceoledb35.dll
sqlceca35.dll
sqlceme35.dll
sqlcecompact35.dll
sqlceer35en.dll 
sqlceer35cn.dll/sqlceer35zh-CHS.dll
sqlceer35de.dll
sqlceer35es.dll 
sqlceer35fr.dll
sqlceer35it.dll 
sqlceer35ja.dll 
sqlceer35ko.dll 
sqlceer35tw.dll/sqlceer35zh-CHT.dll
sqlceer35ru.dll
System.Data.SqlServerCe.dll
System.Data.SqlClient.dll
isqlw35.exe
upgrade.exe
dbnetlib.dll

language: CHS, CHT, DE, ENU, ES, FR, IT, JA, KO, RU
device: ppc, phone
platform: wce4, wce5
processor: armv4, armv4i, mipsii, mipsii_fp, mipsiv, mipsiv_fp, sh4, x86

sql.dev.[language].[device].[platform].[processor].CAB
sql.dev.[language].[platform].[processor].CAB
sql.[device].[platform].[processor].CAB
sql.[platform].[processor].CAB
sqlce.[device].[platform].[processor].CAB
sqlce.[platform].[processor].CAB
sqlce.repl.[device].[platform].[processor].CAB
sqlce.repl.[platform].[processor].CAB
sqlce.dev.[language].[device].[platform].[processor].CAB
sqlce.dev.[language].[platform].[processor].CAB

legal\VERIFICATION.txt

VERIFICATION

Verification is intended to assist the Chocolatey moderators and community
in verifying that this package's contents are trustworthy.

The installers have been downloaded from the official distribution and can
be verified by:

1. Go to the software distribution page

  https://www.microsoft.com/en-us/download/details.aspx?id=5783

and retrieve the SSCERuntime files by selecting the relevant language in the
dropdown followed by the download button and file selection.

2. The archives can be validated by comparing checksums

  - Use powershell function 'Get-Filehash' - Get-Filehash -Algorithm sha256 SSCERuntime-CHS.exe
  - Use chocolatey utility 'checksum.exe'  - checksum -t sha256 -f SSCERuntime-CHS.exe

  File:     SSCERuntime-CHS.exe
  Type:     sha256
  Checksum: 126199C4226EC240F52413D44583A5A66F8314B530F3961388A06AD4293D7FE1


  File:     SSCERuntime-CHT.exe
  Type:     sha256
  Checksum: 55C33E09C925F6C9CF6A6EAEF5D417CF085D2FBD4ECA3D8EDF074B246019624F


  File:     SSCERuntime-DEU.exe
  Type:     sha256
  Checksum: 97026DB2581A6ECD2BF3B8BC3C87B227BDD527FEA857426632F23D4D5CAAE71A


  File:     SSCERuntime-ENU.exe
  Type:     sha256
  Checksum: 2B15E1FAB3533E9C3807184B741A24B4A66C24664432BF6B6177FEFBD1BCE6E3


  File:     SSCERuntime-ESN.exe
  Type:     sha256
  Checksum: 1697F3C6F1B2B3FA4A8E69843731676A9048C4CF9EAEEAB225CD3289BBDB40F1


  File:     SSCERuntime-FRA.exe
  Type:     sha256
  Checksum: DAF8D974D348318EDDA39E8DA3576493452A0A78619AB4896A238A354A6F9AEE


  File:     SSCERuntime-ITA.exe
  Type:     sha256
  Checksum: F69B75184BED21F75001118B4B0EFB81485B1A1CB58D60C763775B0385C8EC67


  File:     SSCERuntime-JPN.exe
  Type:     sha256
  Checksum: 1D62B50433CD23AD4B111A881837DC7D169FCBC03D9737197E17266229716EAB


  File:     SSCERuntime-KOR.exe
  Type:     sha256
  Checksum: 5662EE56374DCE324A2718F523FC1FD88C3BEE0125A912EFF4AEA4990C45ACAD


  File:     SSCERuntime-PTB.exe
  Type:     sha256
  Checksum: 175D771D2D57FA1A51BC7FEF40ACED8AF64F1D40CC4D16EAFC4386D61ABF0956


  File:     SSCERuntime-RUS.exe
  Type:     sha256
  Checksum: DE02FA0EBA8F854AAB2970AFE8209B773C7C5D134D46E2B0ACBE3FF2B04C4828

  
Contents of file LICENSE.txt is obtained from the software distribution page
under the Additional Information section and the software post installation in the files
EULA_ENU.rtf and REDIST_ENU.txt.

tools\chocolateyinstall.ps1

$ErrorActionPreference = 'Stop'
$toolsDir = $(Split-Path -parent $MyInvocation.MyCommand.Definition)

if ($env:ChocolateyForceX86 -eq 'true' -and (Get-ProcessorBits 64) -eq 'true') {
  Write-Error "32-bit install not supported on a 64-bit machine"
}

if ((Get-ProcessorBits 32) -eq 'true') {
  $architecture = 'x86'
} elseif ((Get-ProcessorBits 64) -eq 'true') {
  $architecture = 'x64'
} else {
  Write-Error 'Unsupported CPU architecture'
}

add-type @"
public struct Language {
   public string Code;
   public string Name;
   public string Mapping;
}
"@

$languages =  @{
    'br'    = [Language] @{ Code='br';    Name = 'Brazilian (Portuguese)';   Mapping = 'PTB' }
    'de'    = [Language] @{ Code='de';    Name = 'German';                   Mapping = 'DEU' }
    'en'    = [Language] @{ Code='en';    Name = 'English';                  Mapping = 'ENU' }
    'es'    = [Language] @{ Code='es';    Name = 'Spanish';                  Mapping = 'ESN' }
    'fr'    = [Language] @{ Code='fr';    Name = 'French';                   Mapping = 'FRA' }
    'it'    = [Language] @{ Code='it';    Name = 'Italian';                  Mapping = 'ITA' }
    'ja'    = [Language] @{ Code='ja';    Name = 'Japanese';                 Mapping = 'JPN' }
    'ko'    = [Language] @{ Code='ko';    Name = 'Korean';                   Mapping = 'KOR' }
    'ru'    = [Language] @{ Code='ru';    Name = 'Russian';                  Mapping = 'RUS' }
    'zh'    = [Language] @{ Code='zh';    Name = 'Chinese';                  Mapping = 'CHS' }
    'zh-CN' = [Language] @{ Code='zh-CN'; Name = 'Chinese (Simplified)';     Mapping = 'CHS' }
    'zh-TW' = [Language] @{ Code='zh-TW'; Name = 'Chinese (Traditional)';    Mapping = 'CHT' }
}

$pp = Get-PackageParameters

# check the language parameter and default to 'en' if not supplied
$language = $pp['Language']

if ($null -eq $language -or $language -eq '') {
  $language = 'en'
}

$relang = “(?i)^(br|de|en|es|fr|it|ja|ko|ru|zh|zh-CN|zh-TW)$”

if ($language -notmatch $relang) {
  Write-Error "Unsupported language $($pp.Language)"
}

$mapping = $languages[$language].Mapping

# construct the filename and extract the relevant installer to a temp directory
$fileName = "{0}\SSCERuntime-{1}.exe" -f $toolsDir, $mapping

$tempDir = Join-Path ([System.IO.Path]::GetTempPath()) ([System.IO.Path]::GetRandomFileName())
if (![System.IO.Directory]::Exists($tempDir)) { [System.IO.Directory]::CreateDirectory($tempDir) | Out-Null }

Start-Process "$fileName" -ArgumentList "/T:`"$tempDir`" /q" -Wait

$packageArgs32 = @{
  PackageName    = "$($env:ChocolateyPackageName)-x32"
  FileType       = 'msi'
  File           = "{0}\SSCERuntime_x86-{1}.msi" -f $tempDir, $mapping
  SilentArgs     = '/quiet /qn /norestart'
  ValidExitCodes = @(0, 1641, 3010)
}

Install-ChocolateyInstallPackage @packageArgs32

if ($architecture -eq 'x64') {
    $packageArgs64 = @{
        PackageName    = "$($env:ChocolateyPackageName)-x64"
        FileType       = 'msi'
        File           = "{0}\SSCERuntime_x64-{1}.msi" -f $tempDir, $mapping
        SilentArgs     = '/quiet /qn /norestart'
        ValidExitCodes = @(0, 1641, 3010)
    }

    Install-ChocolateyInstallPackage @packageArgs64
}

Remove-Item -Path "$toolsDir\*.exe" -Force -EA 0
Remove-Item -Path "$tempDir" -Force -EA 0 -Recurse

tools\SSCERuntime-CHS.exe

md5: 4889D39953B077A0FC6D580F0B1189CB | sha1: 0AA2AA43E643482B6A4ECFA4BCE18AD6A8EA63CB | sha256: 126199C4226EC240F52413D44583A5A66F8314B530F3961388A06AD4293D7FE1 | sha512: D634DBE9B61AC64A0F55B8BBF816DF68404464D86396DAAAEEAF56546B3426543D546BA94930CAE5759CEE609553A5CC9849C632FACE9ACC331D4085B66E3735

tools\SSCERuntime-CHT.exe

md5: 29BD7A5BF9B5D178DED685D94CDAE6AC | sha1: 00C262AFE0DBD9214E1CDC7BBE2258940A8A6261 | sha256: 55C33E09C925F6C9CF6A6EAEF5D417CF085D2FBD4ECA3D8EDF074B246019624F | sha512: 4B845E141B72F59E00C5CA2D6D4C740557FF055CEE0D046C669C1850AD81417968FC4EB28E42265ADD6DCA80F433547DAD8A78CB83D430B0617C4390353E3AA7

tools\SSCERuntime-DEU.exe

md5: F465A77941193C14A98BDB6D284E0B21 | sha1: 6FB16D34AD0E856AAA4667E1691F4ECC617DAAC1 | sha256: 97026DB2581A6ECD2BF3B8BC3C87B227BDD527FEA857426632F23D4D5CAAE71A | sha512: B76A59CD694A0A83C84B6DA98C7AF424AF979B1F795283D6264BCAAA3F51686FADA1C8A9F077A5A7A3B60DC2B2FC3CAAF9032BD427425EE0B1A68CA9969A72EC

tools\SSCERuntime-ENU.exe

md5: DA51C37EAFBF7F7F203D784102969E4B | sha1: BFCFAFDF5C339BF16AB73A2400A997BE61D6A477 | sha256: 2B15E1FAB3533E9C3807184B741A24B4A66C24664432BF6B6177FEFBD1BCE6E3 | sha512: 214F0980BB7B81E7329CDBBE5CB46546D310023415029B91D13A0614146062A1A118E7B05B1136F58387FDFAE5AF7BB0A607F107CC9BF11171B30B689BF8743C

tools\SSCERuntime-ESN.exe

md5: E8C7097AFCEF8079C8119302E365D016 | sha1: CC72F4177B7662D2B0F5C5ACD67CFDCA9FF9099D | sha256: 1697F3C6F1B2B3FA4A8E69843731676A9048C4CF9EAEEAB225CD3289BBDB40F1 | sha512: 63117CE70B3EEEB5C4805BA851F3ADD1E634EC870F7E7EC880162D78A0D15FEBCA84B3CDA7EC94F63E77753A8B2B4E296C2C9B24D47B911AEF739A7EE10ACDED

tools\SSCERuntime-FRA.exe

md5: 4738D4EB84564F64F86835B0DB9F01B8 | sha1: 70D182485DCE1DE12DA4FB7284AA00D0A3F34E97 | sha256: DAF8D974D348318EDDA39E8DA3576493452A0A78619AB4896A238A354A6F9AEE | sha512: DA69E66F9D2278395CDC65B71D571A73FF2DF7F7F41E5DD1879EEAB410A15D18959C1DBB7340178D2477680D3B40BB0253D623526472454B28097B8B3FEB363E

tools\SSCERuntime-ITA.exe

md5: 4CAB85D2A5BC8E2567BDCF69A616382A | sha1: DA5A4643BFE6FF06C438E3C7FCBFE5C66AC1175B | sha256: F69B75184BED21F75001118B4B0EFB81485B1A1CB58D60C763775B0385C8EC67 | sha512: F32C73787C30AD0A300C86A9A06F0D348E0A861A6BBF7DE9C1B4AEF7830084CFB6BF7793BD0040C95A7A03608916356C880334B5B0F0DC44155C3E09DBC8F0E8

tools\SSCERuntime-JPN.exe

md5: 51F5A008CFF369B1DE94396AF1ED41D7 | sha1: 7B62621727D9E3165564A7AC62FFBF3E1CC3509C | sha256: 1D62B50433CD23AD4B111A881837DC7D169FCBC03D9737197E17266229716EAB | sha512: E3837720D0F09D5D4C1EBEA087C5DD0BD5EBB4A2A93052731872BCCCDAB198F8049BA6352F85B941A1D24EB31D7DB85F2227A1AD21548DE316A331123401327F

tools\SSCERuntime-KOR.exe

md5: 1E0C9E900366E2674080B0F0127CEABF | sha1: A5261FA0D9169BA48FD5A260BD0D54F396C5271E | sha256: 5662EE56374DCE324A2718F523FC1FD88C3BEE0125A912EFF4AEA4990C45ACAD | sha512: 9E14B660CCE9CE0F525984D51F911C2DCCC186B8F1E76244E2E22B3C76768A73C1528474E8A4CA778264EBC416C6F4D48FCE10E980F0617DE62DA843A85EF250

tools\SSCERuntime-PTB.exe

md5: 90893ADB3A6AB8D150E89FAABCC90E92 | sha1: 1CE7F8D122DF0BB0E23771ED954A2C4E33B98080 | sha256: 175D771D2D57FA1A51BC7FEF40ACED8AF64F1D40CC4D16EAFC4386D61ABF0956 | sha512: 18AA5BEEC14D2ECBB7BA0D23EEB8F33A168C76EBD156FE4170C0C882D1322C5FCD6B6861A01C577755FE77C18F8D95963EEA8F41E71B34AA688CDA2D75DA4438

tools\SSCERuntime-RUS.exe

md5: 49D3032555D4D32EC62DB933224AF2B6 | sha1: 70A8704A9D5B4AB96DA75B10A725B922A93B2393 | sha256: DE02FA0EBA8F854AAB2970AFE8209B773C7C5D134D46E2B0ACBE3FF2B04C4828 | sha512: 5240940C5C5B1CE128BF2EDA8F3DC8937355B8531BD30A3A40CF6EE70CC5C13DEBF0E10C0D0C5425605B5D7BDE10FFA33007939986154F0579534CC56C2B3AFD

Virus Scan Results

mssqlserver-compact3.5.3.5.8080.0.nupkg (fbe3336b92e4) - ## / 61
SSCERuntime-CHS.exe (126199c4226e) - ## / 69
SSCERuntime-CHT.exe (55c33e09c925) - ## / 67
SSCERuntime-DEU.exe (97026db2581a) - ## / 65
SSCERuntime-ENU.exe (2b15e1fab353) - ## / 62
SSCERuntime-ESN.exe (1697f3c6f1b2) - ## / 56
SSCERuntime-FRA.exe (daf8d974d348) - ## / 67
SSCERuntime-ITA.exe (f69b75184bed) - ## / 64
SSCERuntime-JPN.exe (1d62b50433cd) - ## / 66
SSCERuntime-KOR.exe (5662ee56374d) - ## / 67
SSCERuntime-PTB.exe (175d771d2d57) - ## / 68
SSCERuntime-RUS.exe (de02fa0eba8f) - ## / 68

In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).

Chocolatey Pro provides runtime protection from possible malware.

Version History

Version	Downloads	Last Updated	Status
SQL Server Compact 3.5 with SP2 3.5.8080.0	57604	Monday, February 28, 2022	Approved
SQL Server Compact 3.5 with SP2 3.5.5386.2	932277	Friday, September 9, 2016	Approved
SQL Server Compact 3.5 with SP2 3.5.5386.1	1080	Saturday, May 30, 2015	Approved
SQL Server Compact 3.5 with SP2 3.5.5386.0	622	Monday, January 5, 2015	Approved

Dependencies

- DotNet3.5 (≥ 3.5.20160716)

Discussion for the SQL Server Compact 3.5 with SP2 Package

Ground Rules:

This discussion is only about SQL Server Compact 3.5 with SP2 and the SQL Server Compact 3.5 with SP2 package. If you have feedback for Chocolatey, please contact the Google Group.
This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
Tell us what you love about the package or SQL Server Compact 3.5 with SP2, or tell us what needs improvement.
Share your experiences with the package, or extra configuration or gotchas that you've found.
If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.

Resources

Events

Courses

991,583

57,604

28 Feb 2022

SQL Server Compact 3.5 with SP2

SQL Server Compact 3.5 with SP2 3.5.8080.0

All Checks are Passing

Deployment Method: Individual Install, Upgrade, & Uninstall

Deployment Method:

1. Enter Your Internal Repository Url

2. Setup Your Environment

1. Ensure you are set for organizational deployment

2. Get the package into your environment

3. Copy Your Script

4. If applicable - Chocolatey configuration/installation

Package Parameters

Notes

Ground Rules: