Step 1: Review Your Packages

Step 2: Choose Your Integration Method

Step 3: Copy Your Script or Download Config

Option 1: Copy Script

Option 2: Download Config

Step 4: Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the packages and push them to a repository
  Download Packages

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the packages:
  Download Packages
- Follow manual internalization instructions
Package Internalizer (C4B)
- Run: (additional options)
- For package and dependencies run:
- Automate package internalization

Step 5: Copy Your Script

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###

#### We initialize a few things that are needed by this script - there are no other requirements.
$ErrorActionPreference = "Stop"

#### Set TLS 1.2 (3072) as that is the minimum required by various up-to-date repositories.
#### Use integers because the enumeration value for TLS 1.2 won't exist
#### in .NET 4.0, even though they are addressable if .NET 4.5+ is
#### installed (.NET 4.5 is an in-place upgrade).
[System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072

#### We use this variable for future REST calls.
$RequestArguments = @{
    UseBasicParsing = $true
}

## 2. TOP LEVEL VARIABLES ##

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# $NugetRepositoryCredential = [PSCredential]::new(
#     "username",
#     ("password" | ConvertTo-SecureString -AsPlainText -Force)
# )
# $RequestArguments.Credential = $NugetRepositoryCredential

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it
$ChocolateyDownloadUrl = "$($NugetRepositoryUrl.TrimEnd('/'))/package/chocolatey.2.4.0.nupkg"

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# $ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

#### Download the Nupkg, appending .zip to the filename to handle archive cmdlet limitations
if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    $TempDirectory = Join-Path $env:Temp "chocolateyInstall"
    if (-not (Test-Path $TempDirectory -PathType Container)) {
        $null = New-Item -Path $TempDirectory -ItemType Directory
    }
    $DownloadedNupkg = Join-Path $TempDirectory "$(Split-Path $ChocolateyDownloadUrl -Leaf).zip"
    Invoke-WebRequest -Uri $ChocolateyDownloadUrl -OutFile $DownloadedNupkg @RequestArguments

    #### Extract the Nupkg, and run the chocolateyInstall script
    if (Get-Command Microsoft.PowerShell.Archive\Expand-Archive -ErrorAction SilentlyContinue) {
        Microsoft.PowerShell.Archive\Expand-Archive -Path $DownloadedNupkg -DestinationPath $TempDirectory -Force
    } else {
        # PowerShell versions <4.0 do not have this function available
        try {
            $shellApplication = New-Object -ComObject Shell.Application
            $zipPackage = $shellApplication.NameSpace($DownloadedNupkg)
            $destinationFolder = $shellApplication.NameSpace($TempDirectory)
            $destinationFolder.CopyHere($zipPackage.Items(), 0x10)
        } catch {
            Write-Warning "Unable to unzip package using built-in compression."
            throw $_
        }
    }

    & $(Join-Path $TempDirectory "tools\chocolateyInstall.ps1")
}

if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    refreshenv
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# choco feature enable -n useFipsCompliantChecksums

### b. Apply Recommended Configuration ###
#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
choco config set --name cacheLocation --value C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
choco config set --name commandExecutionTimeoutSeconds --value 14400

#### Turn off download progress when running choco through integrations
choco feature disable --name showDownloadProgress

### c. Sources ###
#### Remove the default community package repository source
choco source list --limitoutput | ConvertFrom-Csv -Header 'Name', 'Location' -Delimiter '|' | ForEach-Object {
    if ($_.Location -eq 'https://community.chocolatey.org/api/v2/') {
        choco source remove -n $_.Name
    }
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
if ($NugetRepositoryCredential) {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --user $NugetRepositoryCredential.UserName --password $NugetRepositoryCredential.GetNetworkCredential().Password --priority 1
} else {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --priority 1
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
choco upgrade chocolatey --confirm

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
choco install chocolatey-license --source $NugetRepositoryUrl --confirm

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco source disable --name chocolatey.licensed
} else {
    Write-Warning "Not disabling 'chocolatey.licensed' feed, as Chocolatey-License has not been installed."
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco install chocolatey.extension --source $NugetRepositoryUrl --confirm
} else {
    Write-Warning "Not installing 'chocolatey.extension', as Chocolatey-License has not been installed."
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
choco feature disable --name showNonElevatedWarnings
choco feature enable --name useBackgroundService
choco feature enable --name useBackgroundServiceWithNonAdministratorsOnly
choco feature enable --name allowBackgroundServiceUninstallsFromUserInstallsOnly
choco config set --name allowedBackgroundServiceCommands --value "install,upgrade,uninstall"

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if ($ChocolateyCentralManagementUrl) {
    choco install chocolatey-agent --source $NugetRepositoryUrl --confirm
    choco config set --name CentralManagementServiceUrl --value $ChocolateyCentralManagementUrl
    if ($ChocolateyCentralManagementClientSalt) {
        choco config set --name centralManagementClientCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementClientSalt
    }
    if ($ChocolateyCentralManagementServiceSalt) {
        choco config set --name centralManagementServiceCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementServiceSalt
    }
    choco feature enable --name useChocolateyCentralManagement
    choco feature enable --name useChocolateyCentralManagementDeployments
}

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. chocolatey.chocolatey
##### You will require the chocolatey.chocolatey collection to be installed
##### on all machines using this playbook.
##### Please see https://github.com/chocolatey/chocolatey-ansible/#installing-the-collection-from-ansible-galaxy

- name: Install and Configure Chocolatey
  hosts: all

## 2. TOP LEVEL VARIABLES ##
  vars:

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
    nuget_repository_url: INTERNAL REPO URL

### b. Internal Repository Credential ###
#### If required, add the repository access credential here and
#### uncomment lines with source_username and source_password below
#    nuget_repository_username: username
#    nuget_repository_password: password

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#    chocolatey_central_management_url: https://chocolatey-central-management:24020/ChocolateyManagementService

#### ii. If using a Client Salt, add it here
#    chocolatey_central_management_client_salt: clientsalt

#### iii. If using a Service Salt, add it here
#    chocolatey_central_management_service_salt: servicesalt

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

  tasks:
  - name: Install chocolatey
    win_chocolatey:
      name: chocolatey
      source: ""{{ nuget_repository_url }}""
      # source_username: ""{{ nuget_repository_username }}""
      # source_password: ""{{ nuget_repository_password }}""

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#   - name: Enable FIPS compliance
#     win_chocolatey_feature:
#       name: useFipsCompliantChecksums
#       state: enabled

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
  - name: Set the cache location
    win_chocolatey_config:
      name: cacheLocation
      state: present
      value: C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
  - name: Set the command execution timeout
    win_chocolatey_config:
      name: commandExecutionTimeoutSeconds
      state: present
      value: 14400

#### Turn off download progress when running choco through integrations
  - name: Disable showing download progress
    win_chocolatey_feature:
      name: showDownloadProgress
      state: disabled

### c. Sources ###
#### Remove the default community package repository source
  - name: Remove Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey
      state: absent

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here
#### NOTE: This EXAMPLE may require changes
  - name: Add Internal Repository
    win_chocolatey_source:
      name: ChocolateyInternal
      state: present
      source: {{ nuget_repository_url }}
      # source_username: {{ nuget_repository_username }}
      # source_password: {{ nuget_repository_password }}
      priority: 1

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
  - name: Upgrade Chocolatey
    win_chocolatey:
      name: chocolatey
      state: latest

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.
### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
  - name: Install Chocolatey License
    win_chocolatey:
      name: chocolatey-license
      source: ChocolateyInternal
      state: latest

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
  - name: Disable Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey.licensed
      state: disabled

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
  - name: Install Chocolatey Extension
    win_chocolatey:
      name: chocolatey.extension
      source: ChocolateyInternal
      state: latest

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
  - name: Hide not-elevated warnings
    win_chocolatey_feature:
      name: showNonElevatedWarnings
      state: disabled

  - name: Use background mode for self-service
    win_chocolatey_feature:
      name: useBackgroundService
      state: enabled

  - name: Use background service for non-admins
    win_chocolatey_feature:
      name: useBackgroundServiceWithNonAdministratorsOnly
      state: enabled

  - name: Allow background uninstallation for user installs
    win_chocolatey_feature:
      name: allowBackgroundServiceUninstallsFromUserInstallsOnly
      state: enabled

  - name: Set allowed background service commands
    win_chocolatey_config:
      name: backgroundServiceAllowedCommands
      state: present
      value: install,upgrade,uninstall

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
  - name: Install Chocolatey Agent
    when: chocolatey_central_management_url is defined
    win_chocolatey:
      name: chocolatey-agent
      source: ChocolateyInternal
      state: latest

  - name: Set the Central Management Service URL
    when: chocolatey_central_management_url is defined
    win_chocolatey_config:
      name: CentralManagementServiceUrl
      state: present
      value: {{ chocolatey_central_management_url }}

  - name: Set the Central Management Client Salt
    when: chocolatey_central_management_client_salt is defined
    win_chocolatey_config:
      name: centralManagementClientCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_client_salt }}

  - name: Set the Central Management Service Salt
    when: chocolatey_central_management_service_salt is defined
    win_chocolatey_config:
      name: centralManagementServiceCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_service_salt }}

  - name: Use Central Management
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagement
      state: enabled

  - name: Use Central Management Deployments
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagementDeployments
      state: enabled

See docs at https://docs.chef.io/resource_chocolatey_package.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### The Chocolatey resources are available with any recent version of Chef.
#### We utilise the Chocolatey recipe to install the Chocolatey binaries.
include_recipe "chocolatey"

## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# NugetRepositoryUsername = "username"
# NugetRepositoryPassword = "password"

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
ChocolateyNupkgUrl = "INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg",

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
node['chocolatey']['install vars'] = {
  'chocolateyDownloadUrl' => "#{ChocolateyNupkgUrl}",
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# chocolatey_feature 'useFipsCompliantChecksums' do
#   action :enable
# end

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolatey_config 'cacheLocation' do
  value 'C:\ProgramData\chocolatey\cache'
end

#### Increase timeout to at least 4 hours
chocolatey_config 'commandExecutionTimeoutSeconds' do
  value '14400'
end

#### Turn off download progress when running choco through integrations
chocolatey_feature 'showDownloadProgress' do
  action :disable
end

### c. Sources ###
#### Remove the default community package repository source
chocolatey_source 'chocolatey' do
  action :remove
end

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
chocolatey_source 'ChocolateyInternal' do
  source "#{NugetRepositoryUrl}"
  priority 1
  action   :add
end

execute 'ChocolateyInternal' do
  command "choco source add --name ChocolateyInternal -s #{NugetRepositoryUrl} -u=#{NugetRepositoryUsername} -p=#{NugetRepositoryPassword} --priority=1"
  only_if { NugetRepositoryUsername != nil || NugetRepositoryPassword != nil }
end

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
chocolatey_package 'chocolatey' do
  action :upgrade
  source "#{NugetRepositoryUrl}"
end

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
chocolatey_package 'chocolatey-license' do
  action :install
  source "#{NugetRepositoryUrl}"
end

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
chocolatey_source 'chocolatey.licensed' do
  action            :disable
end

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
chocolatey_package 'chocolatey.extention' do
  action     install
  source     "#{NugetRepositoryUrl}"
end

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolatey_feature 'showNonElevatedWarnings' do
  action :disable
end

chocolatey_feature 'useBackgroundService' do
  action :enable
end

chocolatey_feature 'useBackgroundServiceWithNonAdministratorsOnly' do
  action :enable
end

chocolatey_feature 'allowBackgroundServiceUninstallsFromUserInstallsOnly' do
  action :enable
end

chocolatey_config 'backgroundServiceAllowedCommands' do
  value 'install,upgrade,uninstall'
end

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
chocolatey_package 'chocolatey-agent' do
  action     install
  source     "#{NugetRepositoryUrl}"
  # user       "#{NugetRepositoryUsername}"
  # password   "#{NugetRepositoryPassword}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'CentralManagementServiceUrl' do
  value  "#{ChocolateyCentralManagementUrl}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'centralManagementClientCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementClientSalt}"
  only_if { ChocolateyCentralManagementClientSalt != nil }
end

chocolatey_config 'centralManagementServiceCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementServiceSalt}"
  only_if { ChocolateyCentralManagementServiceSalt != nil }
end

chocolatey_feature 'useChocolateyCentralManagement' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_feature 'useChocolateyCentralManagementDeployments' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.

If Applicable - Chocolatey Configuration/Installation


#requires -Modules cChoco
## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires chocolatey\cChoco DSC module to be installed on the machine compiling the DSC manifest
#### NOTE: This will need to be installed before running the DSC portion of this script
if (-not (Get-Module cChoco -ListAvailable)) {
    $null = Install-PackageProvider -Name NuGet -MinimumVersion 2.8.5.201 -Force
    if (($PSGallery = Get-PSRepository -Name PSGallery).InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy Trusted
    }
    Install-Module -Name cChoco
    if ($PSGallery.InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy $PSGallery.InstallationPolicy
    }
}

#### ii. Requires a hosted copy of the install.ps1 script
##### This should be available to download without authentication.
##### The original script can be found here: https://community.chocolatey.org/install.ps1

Configuration ChocolateyConfig {
## 2. TOP LEVEL VARIABLES ##
    param(
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
        $NugetRepositoryUrl      = "INTERNAL REPO URL",

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
        $ChocolateyNupkgUrl      = "INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg",

### c. Internal Repository Credential ###
#### If required, add the repository access credential here
#        $NugetRepositoryCredential = [PSCredential]::new(
#            "username",
#            ("password" | ConvertTo-SecureString -AsPlainText -Force)
#        ),

### d. Install.ps1 URL
#### The path to the hosted install script:
        $ChocolateyInstallPs1Url = "https://community.chocolatey.org/install.ps1"

### e. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#        $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService",

#### ii. If using a Client Salt, add it here
#        $ChocolateyCentralManagementClientSalt = "clientsalt",

#### iii. If using a Service Salt, add it here
#        $ChocolateyCentralManagementServiceSalt = "servicesalt"
    )
    Import-DscResource -ModuleName PSDesiredStateConfiguration
    Import-DscResource -ModuleName cChoco

    Node 'localhost' {
## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
        Environment chocoDownloadUrl {
            Name  = "chocolateyDownloadUrl"
            Value = $ChocolateyNupkgUrl
        }

        cChocoInstaller installChocolatey {
            DependsOn = "[Environment]chocoDownloadUrl"
            InstallDir = Join-Path $env:ProgramData "chocolatey"
            ChocoInstallScriptUrl = $ChocolateyInstallPs1Url
        }

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#        cChocoFeature featureFipsCompliance {
#            FeatureName = "useFipsCompliantChecksums"
#        }

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
        cChocoConfig cacheLocation {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "cacheLocation"
            Value      = "C:\ProgramData\chocolatey\cache"
        }

#### Increase timeout to at least 4 hours
        cChocoConfig commandExecutionTimeoutSeconds {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "commandExecutionTimeoutSeconds"
            Value      = 14400
        }

#### Turn off download progress when running choco through integrations
        cChocoFeature showDownloadProgress {
            DependsOn   = "[cChocoInstaller]installChocolatey"
            FeatureName = "showDownloadProgress"
            Ensure      = "Absent"
        }

### c. Sources ###
#### Remove the default community package repository source
        cChocoSource removeCommunityRepository {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name       = "chocolatey"
            Ensure     = "Absent"
        }

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here.
#### NOTE: This EXAMPLE may require changes
        cChocoSource addInternalSource {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name        = "ChocolateyInternal"
            Source      = $NugetRepositoryUrl
            Credentials = $NugetRepositoryCredential
            Priority    = 1
        }

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
        cChocoPackageInstaller updateChocolatey {
            DependsOn   = "[cChocoSource]addInternalSource", "[cChocoSource]removeCommunityRepository"
            Name        = "chocolatey"
            AutoUpgrade = $true
        }

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
        cChocoPackageInstaller chocolateyLicense {
            DependsOn = "[cChocoPackageInstaller]updateChocolatey"
            Name      = "chocolatey-license"
        }

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
        Script disableLicensedSource {
            DependsOn  = "[cChocoPackageInstaller]chocolateyLicense"
            GetScript  = {
                $Source = choco source list --limitoutput | `
                    ConvertFrom-Csv -Delimiter '|' -Header Name, Source, Disabled | `
                    Where-Object Name -eq "chocolatey.licensed"

                return @{
                    Result = if ($Source) {
                        [bool]::Parse($Source.Disabled)
                    } else {
                        Write-Warning "Source 'chocolatey.licensed' was not present."
                        $true  # Source does not need disabling
                    }
                }
            }
            SetScript  = {
                $null = choco source disable --name "chocolatey.licensed"
            }
            TestScript = {
                $State = [ScriptBlock]::Create($GetScript).Invoke()
                return $State.Result
            }
        }

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
        cChocoPackageInstaller chocolateyLicensedExtension {
            DependsOn = "[Script]disableLicensedSource"
            Name      = "chocolatey.extension"
        }

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
        cChocoFeature hideElevatedWarnings {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "showNonElevatedWarnings"
            Ensure      = "Absent"
        }

        cChocoFeature useBackgroundService {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundService"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceWithNonAdmins {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundServiceWithNonAdministratorsOnly"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceUninstallsForUserInstalls {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "allowBackgroundServiceUninstallsFromUserInstallsOnly"
            Ensure      = "Present"
        }

        cChocoConfig allowedBackgroundServiceCommands {
            DependsOn   = "[cChocoFeature]useBackgroundService"
            ConfigName = "backgroundServiceAllowedCommands"
            Value       = "install,upgrade,uninstall"
        }

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
        if ($ChocolateyCentralManagementUrl) {
            cChocoPackageInstaller chocolateyAgent {
                DependsOn = "[cChocoPackageInstaller]chocolateyLicensedExtension"
                Name      = "chocolatey-agent"
            }

            cChocoConfig centralManagementServiceUrl {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                ConfigName = "CentralManagementServiceUrl"
                Value       = $ChocolateyCentralManagementUrl
            }

            if ($ChocolateyCentralManagementClientSalt) {
                cChocoConfig centralManagementClientSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementClientCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementClientSalt
                }
            }

            if ($ChocolateyCentralManagementServiceSalt) {
                cChocoConfig centralManagementServiceSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementServiceCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementServiceSalt
                }
            }

            cChocoFeature useCentralManagement {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagement"
                Ensure      = "Present"
            }

            cChocoFeature useCentralManagementDeployments {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagementDeployments"
                Ensure      = "Present"
            }
        }
    }
}

# If working this into an existing configuration with a good method for
$ConfigData = @{
    AllNodes = @(
        @{
            NodeName                    = "localhost"
            PSDscAllowPlainTextPassword = $true
        }
    )
}

try {
    Push-Location $env:Temp
    $Config = ChocolateyConfig -ConfigurationData $ConfigData
    Start-DscConfiguration -Path $Config.PSParentPath -Wait -Verbose -Force
} finally {
    Pop-Location
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires puppetlabs/chocolatey module
####  See https://forge.puppet.com/puppetlabs/chocolatey


## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$_repository_url = 'INTERNAL REPO URL'

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
$_choco_download_url = 'INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg'

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $_chocolatey_central_management_url = 'https://chocolatey-central-management:24020/ChocolateyManagementService'

#### ii. If using a Client Salt, add it here
# $_chocolatey_central_management_client_salt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $_chocolatey_central_management_service_salt = 'servicesalt'


## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
### Note: `chocolatey_download_url is completely different than normal
###  source locations. This is directly to the bare download url for the
###  chocolatey.nupkg, similar to what you see when you browse to
###  https://community.chocolatey.org/api/v2/package/chocolatey
class {'chocolatey':
  chocolatey_download_url => $_choco_download_url,
  use_7zip                => false,
}


## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations

#chocolateyfeature {'useFipsCompliantChecksums':
#  ensure => enabled,
#}

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolateyconfig {'cacheLocation':
  value => 'C:\ProgramData\chocolatey\cache',
}

#### Increase timeout to at least 4 hours
chocolateyconfig {'commandExecutionTimeoutSeconds':
  value => '14400',
}

#### Turn off download progress when running choco through integrations
chocolateyfeature {'showDownloadProgress':
  ensure => disabled,
}

### c. Sources ###
#### Remove the default community package repository source
chocolateysource {'chocolatey':
  ensure   => absent,
  location => 'https://community.chocolatey.org/api/v2/',
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE requires changes
chocolateysource {'internal_chocolatey':
  ensure             => present,
  location           => $_repository_url,
  priority           => 1,
  username           => 'optional',
  password           => 'optional,not ensured',
  bypass_proxy       => true,
  admin_only         => false,
  allow_self_service => false,
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/

package {'chocolatey':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}


## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/guides/organizations/organizational-deployment-guide#exercise-4-create-a-package-for-the-license

# TODO: Add resource for installing/ensuring the chocolatey-license package
package {'chocolatey-license':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
## Disabled sources still need all other attributes until
## https://tickets.puppetlabs.com/browse/MODULES-4449 is resolved.
## Password is necessary with user, but not ensurable, so it should not
## matter what it is set to here. If you ever do get into trouble here,
## the password is your license GUID.
chocolateysource {'chocolatey.licensed':
  ensure   => disabled,
  priority => '10',
  user     => 'customer',
  password => '1234',
  require  => Package['chocolatey-license'],
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
package {'chocolatey.extension':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
  require  => Package['chocolatey-license'],
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolateyfeature {'showNonElevatedWarnings':
  ensure => disabled,
}

chocolateyfeature {'useBackgroundService':
  ensure => enabled,
}

chocolateyfeature {'useBackgroundServiceWithNonAdministratorsOnly':
  ensure => enabled,
}

chocolateyfeature {'allowBackgroundServiceUninstallsFromUserInstallsOnly':
  ensure => enabled,
}

chocolateyconfig {'backgroundServiceAllowedCommands':
  value => 'install,upgrade,uninstall',
}

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if $_chocolatey_central_management_url {
  package {'chocolatey-agent':
    ensure   => latest,
    provider => chocolatey,
    source   => $_repository_url,
    require  => Package['chocolatey-license'],
  }

  chocolateyconfig {'CentralManagementServiceUrl':
    value   => $_chocolatey_central_management_url,
  }

  if $_chocolatey_central_management_client_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  if $_chocolatey_central_management_service_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  chocolateyfeature {'useChocolateyCentralManagement':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }

  chocolateyfeature {'useChocolateyCentralManagementDeployments':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }
}

Need Help? View our docs or file an issue.

There is already a version of this package in your Script Builder

Current Version	New Version

Downloads:

298,571

Downloads of v 3.13.0:

3,230

Last Update:

01 Dec 2021

Package Maintainer(s):

Software Author(s):

Charlie Poole
Rob Prouse

Tags:

nunit console runner test testing tdd

NUnit 3 Console Runner

This is not the latest version of NUnit 3 Console Runner available.

3.13.0 | Updated: 01 Dec 2021

Downloads:

298,571

Downloads of v 3.13.0:

3,230

Maintainer(s):

Software Author(s):

Charlie Poole
Rob Prouse

Tags:

nunit console runner test testing tdd

NUnit 3 Console Runner 3.13.0

This is not the latest version of NUnit 3 Console Runner available.

Legal Disclaimer: Neither this package nor Chocolatey Software, Inc. are affiliated with or endorsed by Charlie Poole, Rob Prouse. The inclusion of Charlie Poole, Rob Prouse trademark(s), if any, upon this webpage is solely to identify Charlie Poole, Rob Prouse goods or services and not for commercial purposes.

Some Checks Have Failed or Are Not Yet Complete

Not All Tests Have Passed

Hide Checks

Validation Testing Passed

Verification Testing Passed

Details

Scan Testing Resulted in Flagged as a Note:

At least one file within this package has greater than 0 detections, but less than 5

Details

Learn More

Deployment Method: Individual Install, Upgrade, & Uninstall

To install NUnit 3 Console Runner, run the following command from the command line or from PowerShell:

To upgrade NUnit 3 Console Runner, run the following command from the command line or from PowerShell:

To uninstall NUnit 3 Console Runner, run the following command from the command line or from PowerShell:

NOTE

This applies to both open source and commercial editions of Chocolatey.

1. Enter Your Internal Repository Url

(this should look similar to https://community.chocolatey.org/api/v2/)

2. Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the package and push it to a repository Download

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the package:
  Download
- Follow manual internalization instructions

Package Internalizer (C4B)

Run: (additional options)

choco download nunit-console-runner --internalize --version=3.13.0 --source=https://community.chocolatey.org/api/v2/

For package and dependencies run:

choco push --source="'INTERNAL REPO URL'"

Automate package internalization

3. Copy Your Script

choco upgrade nunit-console-runner -y --source="'INTERNAL REPO URL'" --version="'3.13.0'" [other options]

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:


choco upgrade nunit-console-runner -y --source="'INTERNAL REPO URL'" --version="'3.13.0'" 
$exitCode = $LASTEXITCODE

Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
  Exit 0
}

Exit $exitCode


- name: Install nunit-console-runner
  win_chocolatey:
    name: nunit-console-runner
    version: '3.13.0'
    source: INTERNAL REPO URL
    state: present

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.


chocolatey_package 'nunit-console-runner' do
  action    :install
  source   'INTERNAL REPO URL'
  version  '3.13.0'
end

See docs at https://docs.chef.io/resource_chocolatey_package.html.


cChocoPackageInstaller nunit-console-runner
{
    Name     = "nunit-console-runner"
    Version  = "3.13.0"
    Source   = "INTERNAL REPO URL"
}

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.


package { 'nunit-console-runner':
  ensure   => '3.13.0',
  provider => 'chocolatey',
  source   => 'INTERNAL REPO URL',
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

4. If applicable - Chocolatey configuration/installation

See infrastructure management matrix for Chocolatey configuration elements and examples.

Package Approved

This package was approved as a trusted package on 02 Dec 2021.

Description

This package includes the nunit3-console runner and test engine for version 3 of the NUnit unit-testing framework.

Files

tools\agents\net20\nunit-agent-x86.exe

md5: B0D13B1B30AA38B2D7F2803B2257DC1C | sha1: 7D6DC3F5FBCD75EFACFA291DA404EC0CB825CB29 | sha256: BBF614A3FE3BA0F06C488B40776E7D00E620DDCF45C8E2B4A7F3AE3697F11A11 | sha512: C618843B17320BD583F203BA2BAEBE340EB7C7B497E2CF12DA5E4A685225EBEA26D7F6404EAC14D02F1677DF16B78CA6D0AA070DA03BF0347D78A2507F1D4002

tools\agents\net20\nunit-agent-x86.exe.config

<?xml version="1.0" encoding="utf-8"?>
<configuration>
  <!--
   Nunit-agent only runs under .NET 2.0 or higher. 
   The setting    useLegacyV2RuntimeActivationPolicy only applies 
   under .NET 4.0 and permits use of mixed mode assemblies, 
   which would otherwise not load correctly. 
  -->
  <startup useLegacyV2RuntimeActivationPolicy="true">
    <!--
     Nunit-agent is normally run by the console or gui
     runners and not independently. In normal usage, 
     the runner specifies which runtime should be used.
     
     Do NOT add any supportedRuntime elements here, 
     since they may prevent the runner from controlling 
     the runtime that is used!
    -->
  </startup>

  <runtime>
    <!-- Ensure that test exceptions don't crash NUnit -->
    <legacyUnhandledExceptionPolicy enabled="1" />

    <!--
     Since legacyUnhandledExceptionPolicy keeps the console from being killed even though an NUnit framework
     test worker thread is killed, this is needed to prevent a hang. NUnit framework can only handle these
     exceptions when this config element is present. (Or if future versions of NUnit framework drop support
     for partial trust which would enable it to use [HandleProcessCorruptedStateExceptions].)
    -->
    <legacyCorruptedStateExceptionsPolicy enabled="true" />

    <!-- Run partial trust V2 assemblies in full trust under .NET 4.0 -->
    <loadFromRemoteSources enabled="true" />

    <!-- Enable reading source information from Portable and Embedded PDBs when running applications -->
    <!-- built against previous .NET Framework versions on .NET Framework 4.7.2 -->
    <AppContextSwitchOverrides value="Switch.System.Diagnostics.IgnorePortablePDBsInStackTraces=false" />
  </runtime>
  
</configuration>

tools\agents\net20\nunit-agent-x86.exe.ignore

tools\agents\net20\nunit-agent.exe

md5: C70CF07FFF18B0A3CDA1DF21E2609FB3 | sha1: 0E83581A3EEA1CCD19AF14464BE8336E5F31A7CA | sha256: 11345EF3FEAD9EED052F7FECB1BDA0DF6B79976075FA6D0A8CF86E6E8A653CEA | sha512: 6B53E91A407E567FF2A2AD986FD137270BF5FD8F90F8C247896746AB01C3D1A0150297788D6DCA9B1FC0ACCE6D5DC8251AFA2B9B5D218BA0AD86772184F655F3

tools\agents\net20\nunit-agent.exe.config

<?xml version="1.0" encoding="utf-8"?>
<configuration>
  <!--
   Nunit-agent only runs under .NET 2.0 or higher. 
   The setting    useLegacyV2RuntimeActivationPolicy only applies 
   under .NET 4.0 and permits use of mixed mode assemblies, 
   which would otherwise not load correctly. 
  -->
  <startup useLegacyV2RuntimeActivationPolicy="true">
    <!--
     Nunit-agent is normally run by the console or gui
     runners and not independently. In normal usage, 
     the runner specifies which runtime should be used.
     
     Do NOT add any supportedRuntime elements here, 
     since they may prevent the runner from controlling 
     the runtime that is used!
    -->
  </startup>

  <runtime>
    <!-- Ensure that test exceptions don't crash NUnit -->
    <legacyUnhandledExceptionPolicy enabled="1" />

    <!--
     Since legacyUnhandledExceptionPolicy keeps the console from being killed even though an NUnit framework
     test worker thread is killed, this is needed to prevent a hang. NUnit framework can only handle these
     exceptions when this config element is present. (Or if future versions of NUnit framework drop support
     for partial trust which would enable it to use [HandleProcessCorruptedStateExceptions].)
    -->
    <legacyCorruptedStateExceptionsPolicy enabled="true" />

    <!-- Run partial trust V2 assemblies in full trust under .NET 4.0 -->
    <loadFromRemoteSources enabled="true" />

    <!-- Enable reading source information from Portable and Embedded PDBs when running applications -->
    <!-- built against previous .NET Framework versions on .NET Framework 4.7.2 -->
    <AppContextSwitchOverrides value="Switch.System.Diagnostics.IgnorePortablePDBsInStackTraces=false" />
  </runtime>
  
</configuration>

tools\agents\net20\nunit-agent.exe.ignore

tools\agents\net20\nunit.agent.addins

tools\agents\net20\nunit.engine.api.dll

md5: 9D3782EAB4792DB1A2FD1C46B0959992 | sha1: DF037F908BCD8BD2DC7FF7DDA28F61476C0DA85E | sha256: 2781B49EFC0D37049C52FED23527FB78F71E974577E835D68D49284F66792135 | sha512: E7D3CADB36C76721FAEC3CBB59F873880888CD59C0E95E43BE4342F5FDD72D7908271DA469C4325B0EC799671D8DD93A0500022DBEF6DEA3B9AB26AB3AEB675A

tools\agents\net20\nunit.engine.api.xml

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>nunit.engine.api</name>
    </assembly>
    <members>
        <member name="T:NUnit.Engine.NUnitEngineException">
            <summary>
            NUnitEngineException is thrown when the engine has been
            called with improper values or when a particular facility
            is not available.
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineException.#ctor(System.String)">
            <summary>
            Construct with a message
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineException.#ctor(System.String,System.Exception)">
            <summary>
            Construct with a message and inner exception
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
            <summary>
            Serialization constructor
            </summary>
        </member>
        <member name="T:NUnit.Engine.NUnitEngineNotFoundException">
            <summary>
            The exception that is thrown if a valid test engine is not found
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineNotFoundException.#ctor">
            <summary>
            Initializes a new instance of the <see cref="T:NUnit.Engine.NUnitEngineNotFoundException"/> class.
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineNotFoundException.#ctor(System.Version)">
            <summary>
            Initializes a new instance of the <see cref="T:NUnit.Engine.NUnitEngineNotFoundException"/> class.
            </summary>
            <param name="minVersion">The minimum version.</param>
        </member>
        <member name="T:NUnit.Engine.NUnitEngineUnloadException">
            <summary>
            NUnitEngineUnloadException is thrown when a test run has completed successfully
            but one or more errors were encountered when attempting to unload
            and shut down the test run cleanly.
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineUnloadException.#ctor(System.String)">
            <summary>
            Construct with a message
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineUnloadException.#ctor(System.String,System.Exception)">
            <summary>
            Construct with a message and inner exception
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineUnloadException.#ctor(System.Collections.Generic.ICollection{System.Exception})">
            <summary>
            Construct with a message and a collection of exceptions.
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineUnloadException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
            <summary>
            Serialization constructor.
            </summary>
        </member>
        <member name="P:NUnit.Engine.NUnitEngineUnloadException.AggregatedExceptions">
            <summary>
            Gets the collection of exceptions .
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.ExtensionAttribute">
            <summary>
            The ExtensionAttribute is used to identify a class that is intended
            to serve as an extension.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.ExtensionAttribute.#ctor">
            <summary>
            Initializes a new instance of the <see cref="T:NUnit.Engine.Extensibility.ExtensionAttribute"/> class.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionAttribute.Path">
            <summary>
            A unique string identifying the ExtensionPoint for which this Extension is 
            intended. This is an optional field provided NUnit is able to deduce the
            ExtensionPoint from the Type of the extension class.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionAttribute.Description">
            <summary>
            An optional description of what the extension does.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionAttribute.Enabled">
            <summary>
            Flag indicating whether the extension is enabled.
            </summary>
            <value><c>true</c> if enabled; otherwise, <c>false</c>.</value>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionAttribute.EngineVersion">
            <summary>
            The minimum Engine version for which this extension is designed
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.ExtensionPointAttribute">
            <summary>
            ExtensionPointAttribute is used at the assembly level to identify and
            document any ExtensionPoints supported by the assembly.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.ExtensionPointAttribute.#ctor(System.String,System.Type)">
            <summary>
            Construct an ExtensionPointAttribute
            </summary>
            <param name="path">A unique string identifying the extension point.</param>
            <param name="type">The required Type of any extension that is installed at this extension point.</param>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionPointAttribute.Path">
            <summary>
            The unique string identifying this ExtensionPoint. This identifier
            is typically formatted as a path using '/' and the set of extension 
            points is sometimes viewed as forming a tree.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionPointAttribute.Type">
            <summary>
            The required Type (usually an interface) of any extension that is 
            installed at this ExtensionPoint.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionPointAttribute.Description">
            <summary>
            An optional description of the purpose of the ExtensionPoint
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.ExtensionPropertyAttribute">
            <summary>
            The ExtensionPropertyAttribute is used to specify named properties for an extension.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.ExtensionPropertyAttribute.#ctor(System.String,System.String)">
            <summary>
            Construct an ExtensionPropertyAttribute
            </summary>
            <param name="name">The name of the property</param>
            <param name="value">The property value</param>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionPropertyAttribute.Name">
            <summary>
            The name of the property.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionPropertyAttribute.Value">
            <summary>
            The property value
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IDriverFactory">
            <summary>
            Interface implemented by a Type that knows how to create a driver for a test assembly.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IDriverFactory.IsSupportedTestFramework(System.Reflection.AssemblyName)">
            <summary>
            Gets a flag indicating whether a given AssemblyName
            represents a test framework supported by this factory.
            </summary>
            <param name="reference">An AssemblyName referring to the possible test framework.</param>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IDriverFactory.GetDriver(System.AppDomain,System.Reflection.AssemblyName)">
            <summary>
            Gets a driver for a given test assembly and a framework
            which the assembly is already known to reference.
            </summary>
            <param name="domain">The domain in which the assembly will be loaded</param>
            <param name="reference">An AssemblyName referring to the test framework.</param>
            <returns></returns>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IExtensionNode">
            <summary>
            The IExtensionNode interface is implemented by a class that represents a
            single extension being installed on a particular extension point.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.TypeName">
            <summary>
            Gets the full name of the Type of the extension object.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.Enabled">
            <summary>
            Gets a value indicating whether this <see cref="T:NUnit.Engine.Extensibility.IExtensionNode"/> is enabled.
            </summary>
            <value><c>true</c> if enabled; otherwise, <c>false</c>.</value>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.Path">
            <summary>
            Gets the unique string identifying the ExtensionPoint for which
            this Extension is intended. This identifier may be supplied by the attribute
            marking the extension or deduced by NUnit from the Type of the extension class.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.Description">
            <summary>
            Gets an optional description of what the extension does.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.TargetFramework">
            <summary>
            The TargetFramework of the extension assembly.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.PropertyNames">
            <summary>
            Gets a collection of the names of all this extension's properties
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IExtensionNode.GetValues(System.String)">
            <summary>
            Gets a collection of the values of a particular named property
            If none are present, returns an empty enumerator.
            </summary>
            <param name="name">The property name</param>
            <returns>A collection of values</returns>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.AssemblyPath">
            <summary>
            The path to the assembly implementing this extension.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.AssemblyVersion">
            <summary>
            The version of the assembly implementing this extension.
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IExtensionPoint">
            <summary>
            An ExtensionPoint represents a single point in the TestEngine
            that may be extended by user addins and extensions.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionPoint.Path">
            <summary>
            Gets the unique path identifying this extension point.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionPoint.Description">
            <summary>
            Gets the description of this extension point. May be null.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionPoint.TypeName">
            <summary>
            Gets the FullName of the Type required for any extension to be installed at this extension point.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionPoint.Extensions">
            <summary>
            Gets an enumeration of IExtensionNodes for extensions installed on this extension point.
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IFrameworkDriver">
            <summary>
            The IFrameworkDriver interface is implemented by a class that
            is able to use an external framework to explore or run tests
            under the engine.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IFrameworkDriver.ID">
            <summary>
            Gets and sets the unique identifier for this driver,
            used to ensure that test ids are unique across drivers.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IFrameworkDriver.Load(System.String,System.Collections.Generic.IDictionary{System.String,System.Object})">
            <summary>
            Loads the tests in an assembly.
            </summary>
            <returns>An Xml string representing the loaded test</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IFrameworkDriver.CountTestCases(System.String)">
            <summary>
            Count the test cases that would be executed.
            </summary>
            <param name="filter">An XML string representing the TestFilter to use in counting the tests</param>
            <returns>The number of test cases counted</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IFrameworkDriver.Run(NUnit.Engine.ITestEventListener,System.String)">
            <summary>
            Executes the tests in an assembly.
            </summary>
            <param name="listener">An ITestEventHandler that receives progress notices</param>
            <param name="filter">A XML string representing the filter that controls which tests are executed</param>
            <returns>An Xml string representing the result</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IFrameworkDriver.Explore(System.String)">
            <summary>
            Returns information about the tests in an assembly.
            </summary>
            <param name="filter">An XML string representing the filter that controls which tests are included</param>
            <returns>An Xml string representing the tests</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IFrameworkDriver.StopRun(System.Boolean)">
            <summary>
            Cancel the ongoing test run. If no  test is running, the call is ignored.
            </summary>
            <param name="force">If true, cancel any ongoing test threads, otherwise wait for them to complete.</param>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IProject">
            <summary>
            Interface for the various project types that the engine can load.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IProject.ProjectPath">
            <summary>
            Gets the path to the file storing this project, if any.
            If the project has not been saved, this is null.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IProject.ActiveConfigName">
            <summary>
            Gets the active configuration, as defined
            by the particular project.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IProject.ConfigNames">
            <summary>
            Gets a list of the configs for this project
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IProject.GetTestPackage">
            <summary>
            Gets a test package for the primary or active
            configuration within the project. The package 
            includes all the assemblies and any settings
            specified in the project format.
            </summary>
            <returns>A TestPackage</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IProject.GetTestPackage(System.String)">
            <summary>
            Gets a TestPackage for a specific configuration
            within the project. The package includes all the
            assemblies and any settings specified in the 
            project format.
            </summary>
            <param name="configName">The name of the config to use</param>
            <returns>A TestPackage for the named configuration.</returns>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IProjectLoader">
            <summary>
            The IProjectLoader interface is implemented by any class
            that knows how to load projects in a specific format.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IProjectLoader.CanLoadFrom(System.String)">
            <summary>
            Returns true if the file indicated is one that this
            loader knows how to load.
            </summary>
            <param name="path">The path of the project file</param>
            <returns>True if the loader knows how to load this file, otherwise false</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IProjectLoader.LoadFrom(System.String)">
            <summary>
            Loads a project of a known format.
            </summary>
            <param name="path">The path of the project file</param>
            <returns>An IProject interface to the loaded project or null if the project cannot be loaded</returns>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IResultWriter">
            <summary>
            Common interface for objects that process and write out test results
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IResultWriter.CheckWritability(System.String)">
            <summary>
            Checks if the output path is writable. If the output is not
            writable, this method should throw an exception.
            </summary>
            <param name="outputPath"></param>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IResultWriter.WriteResultFile(System.Xml.XmlNode,System.String)">
            <summary>
            Writes result to the specified output path.
            </summary>
            <param name="resultNode">XmlNode for the result</param>
            <param name="outputPath">Path to which it should be written</param>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IResultWriter.WriteResultFile(System.Xml.XmlNode,System.IO.TextWriter)">
            <summary>
            Writes result to a TextWriter.
            </summary>
            <param name="resultNode">XmlNode for the result</param>
            <param name="writer">TextWriter to which it should be written</param>
        </member>
        <member name="T:NUnit.Engine.Extensibility.TypeExtensionPointAttribute">
            <summary>
            TypeExtensionPointAttribute is used to bind an extension point
            to a class or interface.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.TypeExtensionPointAttribute.#ctor(System.String)">
            <summary>
            Construct a TypeExtensionPointAttribute, specifying the path.
            </summary>
            <param name="path">A unique string identifying the extension point.</param>
        </member>
        <member name="M:NUnit.Engine.Extensibility.TypeExtensionPointAttribute.#ctor">
            <summary>
            Construct an TypeExtensionPointAttribute, without specifying the path.
            The extension point will use a path constructed based on the interface
            or class to which the attribute is applied.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.TypeExtensionPointAttribute.Path">
            <summary>
            The unique string identifying this ExtensionPoint. This identifier
            is typically formatted as a path using '/' and the set of extension 
            points is sometimes viewed as forming a tree.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.TypeExtensionPointAttribute.Description">
            <summary>
            An optional description of the purpose of the ExtensionPoint
            </summary>
        </member>
        <member name="T:NUnit.Engine.IAvailableRuntimes">
            <summary>
            Interface that returns a list of available runtime frameworks.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IAvailableRuntimes.AvailableRuntimes">
            <summary>
            Gets a list of available runtime frameworks.
            </summary>
        </member>
        <member name="T:NUnit.Engine.IExtensionService">
            <summary>
            The IExtensionService interface allows a runner to manage extensions.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IExtensionService.ExtensionPoints">
            <summary>
            Gets an enumeration of all ExtensionPoints in the engine.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IExtensionService.Extensions">
            <summary>
            Gets an enumeration of all installed Extensions.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IExtensionService.GetExtensionPoint(System.String)">
            <summary>
            Get an ExtensionPoint based on its unique identifying path.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IExtensionService.GetExtensionNodes(System.String)">
            <summary>
            Get an enumeration of ExtensionNodes based on their identifying path.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IExtensionService.EnableExtension(System.String,System.Boolean)">
            <summary>
            Enable or disable an extension
            </summary>
            <param name="typeName"></param>
            <param name="enabled"></param>
        </member>
        <member name="T:NUnit.Engine.ILogger">
            <summary>
            Interface for logging within the engine
            </summary>
        </member>
        <member name="M:NUnit.Engine.ILogger.Error(System.String)">
            <summary>
            Logs the specified message at the error level.
            </summary>
            <param name="message">The message.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Error(System.String,System.Object[])">
            <summary>
            Logs the specified message at the error level.
            </summary>
            <param name="format">The message.</param>
            <param name="args">The arguments.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Warning(System.String)">
            <summary>
            Logs the specified message at the warning level.
            </summary>
            <param name="message">The message.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Warning(System.String,System.Object[])">
            <summary>
            Logs the specified message at the warning level.
            </summary>
            <param name="format">The message.</param>
            <param name="args">The arguments.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Info(System.String)">
            <summary>
            Logs the specified message at the info level.
            </summary>
            <param name="message">The message.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Info(System.String,System.Object[])">
            <summary>
            Logs the specified message at the info level.
            </summary>
            <param name="format">The message.</param>
            <param name="args">The arguments.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Debug(System.String)">
            <summary>
            Logs the specified message at the debug level.
            </summary>
            <param name="message">The message.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Debug(System.String,System.Object[])">
            <summary>
            Logs the specified message at the debug level.
            </summary>
            <param name="format">The message.</param>
            <param name="args">The arguments.</param>
        </member>
        <member name="T:NUnit.Engine.ILogging">
            <summary>
            Interface to abstract getting loggers
            </summary>
        </member>
        <member name="M:NUnit.Engine.ILogging.GetLogger(System.String)">
            <summary>
            Gets the logger.
            </summary>
            <param name="name">The name of the logger to get.</param>
            <returns></returns>
        </member>
        <member name="T:NUnit.Engine.InternalTraceLevel">
            <summary>
            InternalTraceLevel is an enumeration controlling the
            level of detailed presented in the internal log.
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Default">
            <summary>
            Use the default settings as specified by the user.
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Off">
            <summary>
            Do not display any trace messages
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Error">
            <summary>
            Display Error messages only
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Warning">
            <summary>
            Display Warning level and higher messages
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Info">
            <summary>
            Display informational and higher messages
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Debug">
            <summary>
            Display debug messages and higher - i.e. all messages
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Verbose">
            <summary>
            Display debug messages and higher - i.e. all messages
            </summary>
        </member>
        <member name="T:NUnit.Engine.IRecentFiles">
            <summary>
            The IRecentFiles interface is used to isolate the app
            from various implementations of recent files.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRecentFiles.MaxFiles">
            <summary>
            The max number of files saved
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRecentFiles.Entries">
            <summary>
            Get a list of all the file entries
            </summary>
            <returns>The most recent file list</returns>
        </member>
        <member name="M:NUnit.Engine.IRecentFiles.SetMostRecent(System.String)">
            <summary>
            Set the most recent file name, reordering
            the saved names as needed and removing the oldest
            if the max number of files would be exceeded.
            The current CLR version is used to create the entry.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IRecentFiles.Remove(System.String)">
            <summary>
            Remove a file from the list
            </summary>
            <param name="fileName">The name of the file to remove</param>
        </member>
        <member name="T:NUnit.Engine.IResultService">
            <summary>
            IResultWriterService provides result writers for a specified
            well-known format.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IResultService.Formats">
            <summary>
            Gets an array of the available formats
            </summary>
        </member>
        <member name="M:NUnit.Engine.IResultService.GetResultWriter(System.String,System.Object[])">
            <summary>
            Gets a ResultWriter for a given format and set of arguments.
            </summary>
            <param name="format">The name of the format to be used</param>
            <param name="args">A set of arguments to be used in constructing the writer or null if non arguments are needed</param>
            <returns>An IResultWriter</returns>
        </member>
        <member name="T:NUnit.Engine.IRuntimeFramework">
            <summary>
            Interface implemented by objects representing a runtime framework.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRuntimeFramework.Id">
            <summary>
            Gets the inique Id for this runtime, such as "net-4.5"
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRuntimeFramework.DisplayName">
            <summary>
            Gets the display name of the framework, such as ".NET 4.5"
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRuntimeFramework.FrameworkVersion">
            <summary>
            Gets the framework version: usually contains two components, Major
            and Minor, which match the corresponding CLR components, but not always.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRuntimeFramework.ClrVersion">
            <summary>
            Gets the Version of the CLR for this framework
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRuntimeFramework.Profile">
            <summary>
            Gets a string representing the particular profile installed,
            or null if there is no profile. Currently. the only defined 
            values are Full and Client.
            </summary>
        </member>
        <member name="T:NUnit.Engine.IRuntimeFrameworkService">
            <summary>
            Implemented by a type that provides information about the
            current and other available runtimes.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IRuntimeFrameworkService.IsAvailable(System.String)">
            <summary>
            Returns true if the runtime framework represented by
            the string passed as an argument is available.
            </summary>
            <param name="framework">A string representing a framework, like 'net-4.0'</param>
            <returns>True if the framework is available, false if unavailable or nonexistent</returns>
        </member>
        <member name="M:NUnit.Engine.IRuntimeFrameworkService.SelectRuntimeFramework(NUnit.Engine.TestPackage)">
             <summary>
             Selects a target runtime framework for a TestPackage based on
             the settings in the package and the assemblies themselves.
             The package RuntimeFramework setting may be updated as a 
             result and the selected runtime is returned.
            
             Note that if a package has subpackages, the subpackages may run on a different
             framework to the top-level package. In future, this method should
             probably not return a simple string, and instead require runners
             to inspect the test package structure, to find all desired frameworks.
             </summary>
             <param name="package">A TestPackage</param>
             <returns>The selected RuntimeFramework</returns>
        </member>
        <member name="T:NUnit.Engine.ServiceStatus">
            <summary>
            Enumeration representing the status of a service
            </summary>
        </member>
        <member name="F:NUnit.Engine.ServiceStatus.Stopped">
            <summary>Service was never started or has been stopped</summary>
        </member>
        <member name="F:NUnit.Engine.ServiceStatus.Started">
            <summary>Started successfully</summary>
        </member>
        <member name="F:NUnit.Engine.ServiceStatus.Error">
            <summary>Service failed to start and is unavailable</summary>
        </member>
        <member name="T:NUnit.Engine.IService">
            <summary>
            The IService interface is implemented by all Services. Although it
            is extensible, it does not reside in the Extensibility namespace
            because it is so widely used by the engine.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IService.ServiceContext">
            <summary>
            The ServiceContext
            </summary>
        </member>
        <member name="P:NUnit.Engine.IService.Status">
            <summary>
            Gets the ServiceStatus of this service
            </summary>
        </member>
        <member name="M:NUnit.Engine.IService.StartService">
            <summary>
            Initialize the Service
            </summary>
        </member>
        <member name="M:NUnit.Engine.IService.StopService">
            <summary>
            Do any cleanup needed before terminating the service
            </summary>
        </member>
        <member name="T:NUnit.Engine.IServiceLocator">
            <summary>
            IServiceLocator allows clients to locate any NUnit services
            for which the interface is referenced. In normal use, this
            linits it to those services using interfaces defined in the 
            nunit.engine.api assembly.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IServiceLocator.GetService``1">
            <summary>
            Return a specified type of service
            </summary>
        </member>
        <member name="M:NUnit.Engine.IServiceLocator.GetService(System.Type)">
            <summary>
            Return a specified type of service
            </summary>
        </member>
        <member name="T:NUnit.Engine.SettingsEventHandler">
            <summary>
            Event handler for settings changes
            </summary>
            <param name="sender">The sender.</param>
            <param name="args">The <see cref="T:NUnit.Engine.SettingsEventArgs"/> instance containing the event data.</param>
        </member>
        <member name="T:NUnit.Engine.SettingsEventArgs">
            <summary>
            Event argument for settings changes
            </summary>
        </member>
        <member name="M:NUnit.Engine.SettingsEventArgs.#ctor(System.String)">
            <summary>
            Initializes a new instance of the <see cref="T:NUnit.Engine.SettingsEventArgs"/> class.
            </summary>
            <param name="settingName">Name of the setting that has changed.</param>
        </member>
        <member name="P:NUnit.Engine.SettingsEventArgs.SettingName">
            <summary>
            Gets the name of the setting that has changed
            </summary>
        </member>
        <member name="T:NUnit.Engine.ISettings">
            <summary>
            The ISettings interface is used to access all user
            settings and options.
            </summary>
        </member>
        <member name="E:NUnit.Engine.ISettings.Changed">
            <summary>
            Occurs when the settings are changed.
            </summary>
        </member>
        <member name="M:NUnit.Engine.ISettings.GetSetting(System.String)">
            <summary>
            Load a setting from the storage.
            </summary>
            <param name="settingName">Name of the setting to load</param>
            <returns>Value of the setting or null</returns>
        </member>
        <member name="M:NUnit.Engine.ISettings.GetSetting``1(System.String,``0)">
            <summary>
            Load a setting from the storage or return a default value
            </summary>
            <param name="settingName">Name of the setting to load</param>
            <param name="defaultValue">Value to return if the setting is missing</param>
            <returns>Value of the setting or the default value</returns>
        </member>
        <member name="M:NUnit.Engine.ISettings.RemoveSetting(System.String)">
            <summary>
            Remove a setting from the storage
            </summary>
            <param name="settingName">Name of the setting to remove</param>
        </member>
        <member name="M:NUnit.Engine.ISettings.RemoveGroup(System.String)">
            <summary>
            Remove an entire group of settings from the storage
            </summary>
            <param name="groupName">Name of the group to remove</param>
        </member>
        <member name="M:NUnit.Engine.ISettings.SaveSetting(System.String,System.Object)">
            <summary>
            Save a setting in the storage
            </summary>
            <param name="settingName">Name of the setting to save</param>
            <param name="settingValue">Value to be saved</param>
        </member>
        <member name="T:NUnit.Engine.ITestEngine">
            <summary>
            ITestEngine represents an instance of the test engine.
            Clients wanting to discover, explore or run tests start
            require an instance of the engine, which is generally
            acquired from the TestEngineActivator class.
            </summary>
        </member>
        <member name="P:NUnit.Engine.ITestEngine.Services">
            <summary>
            Gets the IServiceLocator interface, which gives access to
            certain services provided by the engine.
            </summary>
        </member>
        <member name="P:NUnit.Engine.ITestEngine.WorkDirectory">
            <summary>
            Gets and sets the directory path used by the engine for saving files.
            Some services may ignore changes to this path made after initialization.
            The default value is the current directory.
            </summary>
        </member>
        <member name="P:NUnit.Engine.ITestEngine.InternalTraceLevel">
            <summary>
            Gets and sets the InternalTraceLevel used by the engine. Changing this
            setting after initialization will have no effect. The default value
            is the value saved in the NUnit settings.
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestEngine.Initialize">
             <summary>
             Initialize the engine. This includes initializing mono addins,
             setting the trace level and creating the standard set of services
             used in the Engine.
            
             This interface is not normally called by user code. Programs linking
             only to the nunit.engine.api assembly are given a
             pre-initialized instance of TestEngine. Programs
             that link directly to nunit.engine usually do so
             in order to perform custom initialization.
             </summary>
        </member>
        <member name="M:NUnit.Engine.ITestEngine.GetRunner(NUnit.Engine.TestPackage)">
            <summary>
            Returns a test runner instance for use by clients in discovering,
            exploring and executing tests.
            </summary>
            <param name="package">The TestPackage for which the runner is intended.</param>
            <returns>An ITestRunner.</returns>
        </member>
        <member name="T:NUnit.Engine.ITestEventListener">
            <summary>
            The ITestListener interface is used to receive notices of significant
            events while a test is running. Its single method accepts an Xml string,
            which may represent any event generated by the test framework, the driver
            or any of the runners internal to the engine. Use of Xml means that
            any driver and framework may add additional events and the engine will
            simply pass them on through this interface.
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestEventListener.OnTestEvent(System.String)">
            <summary>
            Handle a progress report or other event.
            </summary>
            <param name="report">An XML progress report.</param>
        </member>
        <member name="T:NUnit.Engine.ITestFilterBuilder">
            <summary>
            Interface to a TestFilterBuilder, which is used to create TestFilters
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestFilterBuilder.AddTest(System.String)">
            <summary>
            Add a test to be selected
            </summary>
            <param name="fullName">The full name of the test, as created by NUnit</param>
        </member>
        <member name="M:NUnit.Engine.ITestFilterBuilder.SelectWhere(System.String)">
            <summary>
            Specify what is to be included by the filter using a where clause.
            </summary>
            <param name="whereClause">A where clause that will be parsed by NUnit to create the filter.</param>
        </member>
        <member name="M:NUnit.Engine.ITestFilterBuilder.GetFilter">
            <summary>
            Get a TestFilter constructed according to the criteria specified by the other calls.
            </summary>
            <returns>A TestFilter.</returns>
        </member>
        <member name="T:NUnit.Engine.ITestFilterService">
            <summary>
            The TestFilterService provides builders that can create TestFilters
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestFilterService.GetTestFilterBuilder">
            <summary>
            Get an uninitialized TestFilterBuilder
            </summary>
        </member>
        <member name="T:NUnit.Engine.ITestRun">
            <summary>
            The ITestRun class represents an ongoing test run.
            </summary>
        </member>
        <member name="P:NUnit.Engine.ITestRun.Result">
            <summary>
            Get the result of the test.
            </summary>
            <returns>An XmlNode representing the test run result</returns>
        </member>
        <member name="M:NUnit.Engine.ITestRun.Wait(System.Int32)">
            <summary>
            Blocks the current thread until the current test run completes
            or the timeout is reached
            </summary>
            <param name="timeout">A <see cref="T:System.Int32"/> that represents the number of milliseconds to wait or -1 milliseconds to wait indefinitely. </param>
            <returns>True if the run completed</returns>
        </member>
        <member name="T:NUnit.Engine.ITestRunner">
            <summary>
            Interface implemented by all test runners.
            </summary>
        </member>
        <member name="P:NUnit.Engine.ITestRunner.IsTestRunning">
            <summary>
            Get a flag indicating whether a test is running
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.Load">
            <summary>
            Load a TestPackage for possible execution
            </summary>
            <returns>An XmlNode representing the loaded package.</returns>
            <remarks>
            This method is normally optional, since Explore and Run call
            it automatically when necessary. The method is kept in order
            to make it easier to convert older programs that use it.
            </remarks>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.Unload">
            <summary>
            Unload any loaded TestPackage. If none is loaded,
            the call is ignored.
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.Reload">
            <summary>
            Reload the current TestPackage
            </summary>
            <returns>An XmlNode representing the loaded package.</returns>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.CountTestCases(NUnit.Engine.TestFilter)">
            <summary>
            Count the test cases that would be run under
            the specified filter.
            </summary>
            <param name="filter">A TestFilter</param>
            <returns>The count of test cases</returns>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.Run(NUnit.Engine.ITestEventListener,NUnit.Engine.TestFilter)">
            <summary>
            Run the tests in the loaded TestPackage and return a test result. The tests
            are run synchronously and the listener interface is notified as it progresses.
            </summary>
            <param name="listener">The listener that is notified as the run progresses</param>
            <param name="filter">A TestFilter used to select tests</param>
            <returns>An XmlNode giving the result of the test execution</returns>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.RunAsync(NUnit.Engine.ITestEventListener,NUnit.Engine.TestFilter)">
            <summary>
            Start a run of the tests in the loaded TestPackage. The tests are run
            asynchronously and the listener interface is notified as it progresses.
            </summary>
            <param name="listener">The listener that is notified as the run progresses</param>
            <param name="filter">A TestFilter used to select tests</param>
            <returns></returns>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.StopRun(System.Boolean)">
            <summary>
            Cancel the ongoing test run. If no  test is running, the call is ignored.
            </summary>
            <param name="force">If true, cancel any ongoing test threads, otherwise wait for them to complete.</param>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.Explore(NUnit.Engine.TestFilter)">
            <summary>
            Explore a loaded TestPackage and return information about the tests found.
            </summary>
            <param name="filter">The TestFilter to be used in selecting tests to explore.</param>
            <returns>An XmlNode representing the tests found.</returns>
        </member>
        <member name="T:NUnit.Engine.TestEngineActivator">
            <summary>
            TestEngineActivator creates an instance of the test engine and returns an ITestEngine interface.
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestEngineActivator.CreateInstance(System.Boolean)">
            <summary>
            Create an instance of the test engine.
            </summary>
            <param name="unused">This parameter is no longer used but has not been removed to ensure API compatibility.</param>
            <exception cref="T:NUnit.Engine.NUnitEngineNotFoundException">Thrown when a test engine of the required minimum version is not found</exception>
            <returns>An <see cref="T:NUnit.Engine.ITestEngine"/></returns>
        </member>
        <member name="M:NUnit.Engine.TestEngineActivator.CreateInstance(System.Version,System.Boolean)">
            <summary>
            Create an instance of the test engine with a minimum version.
            </summary>
            <param name="minVersion">The minimum version of the engine to return inclusive.</param>
            <param name="unused">This parameter is no longer used but has not been removed to ensure API compatibility.</param>
            <exception cref="T:NUnit.Engine.NUnitEngineNotFoundException">Thrown when a test engine of the required minimum version is not found</exception>
            <returns>An <see cref="T:NUnit.Engine.ITestEngine"/></returns>
        </member>
        <member name="T:NUnit.Engine.TestFilter">
            <summary>
            Abstract base for all test filters. A filter is represented
            by an XmlNode with &lt;filter&gt; as its topmost element.
            In the console runner, filters serve only to carry this
            XML representation, as all filtering is done by the engine.
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestFilter.#ctor(System.String)">
            <summary>
            Initializes a new instance of the <see cref="T:NUnit.Engine.TestFilter"/> class.
            </summary>
            <param name="xmlText">The XML text that specifies the filter.</param>
        </member>
        <member name="F:NUnit.Engine.TestFilter.Empty">
            <summary>
            The empty filter - one that always passes.
            </summary>
        </member>
        <member name="P:NUnit.Engine.TestFilter.Text">
            <summary>
            Gets the XML representation of this filter as a string.
            </summary>
        </member>
        <member name="T:NUnit.Engine.TestPackage">
            <summary>
            TestPackage holds information about a set of test files to
            be loaded by a TestRunner. Each TestPackage represents
            tests for one or more test files. TestPackages may be named
            or anonymous, depending on the constructor used.
            
            Upon construction, a package is given an ID (string), which
            remains unchanged for the lifetime of the TestPackage instance.
            The package ID is passed to the test framework for use in generating
            test IDs.
            
            A runner that reloads test assemblies and wants the ids to remain stable
            should avoid creating a new package but should instead use the original
            package, changing settings as needed. This gives the best chance for the
            tests in the reloaded assembly to match those originally loaded.
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestPackage.#ctor(System.String)">
            <summary>
            Construct a named TestPackage, specifying a file path for
            the assembly or project to be used.
            </summary>
            <param name="filePath">The file path.</param>
        </member>
        <member name="M:NUnit.Engine.TestPackage.#ctor(System.Collections.Generic.IList{System.String})">
            <summary>
            Construct an anonymous TestPackage that wraps test files.
            </summary>
            <param name="testFiles"></param>
        </member>
        <member name="P:NUnit.Engine.TestPackage.ID">
            <summary>
            Every test package gets a unique ID used to prefix test IDs within that package.
            </summary>
            <remarks>
            The generated ID is only unique for packages created within the same application domain.
            For that reason, NUnit pre-creates all test packages that will be needed.
            </remarks>
        </member>
        <member name="P:NUnit.Engine.TestPackage.Name">
            <summary>
            Gets the name of the package
            </summary>
        </member>
        <member name="P:NUnit.Engine.TestPackage.FullName">
            <summary>
            Gets the path to the file containing tests. It may be
            an assembly or a recognized project type.
            </summary>
        </member>
        <member name="P:NUnit.Engine.TestPackage.SubPackages">
            <summary>
            Gets the list of SubPackages contained in this package
            </summary>
        </member>
        <member name="P:NUnit.Engine.TestPackage.Settings">
            <summary>
            Gets the settings dictionary for this package.
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestPackage.AddSubPackage(NUnit.Engine.TestPackage)">
            <summary>
            Add a subproject to the package.
            </summary>
            <param name="subPackage">The subpackage to be added</param>
        </member>
        <member name="M:NUnit.Engine.TestPackage.AddSetting(System.String,System.Object)">
            <summary>
            Add a setting to a package and all of its subpackages.
            </summary>
            <param name="name">The name of the setting</param>
            <param name="value">The value of the setting</param>
            <remarks>
            Once a package is created, subpackages may have been created
            as well. If you add a setting directly to the Settings dictionary
            of the package, the subpackages are not updated. This method is
            used when the settings are intended to be reflected to all the
            subpackages under the package.
            </remarks>
        </member>
        <member name="M:NUnit.Engine.TestPackage.GetSetting``1(System.String,``0)">
            <summary>
            Return the value of a setting or a default.
            </summary>
            <param name="name">The name of the setting</param>
            <param name="defaultSetting">The default value</param>
            <returns></returns>
        </member>
        <member name="T:NUnit.Engine.TestSelectionParserException">
            <summary>
            TestSelectionParserException is thrown when an error
            is found while parsing the selection expression.
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestSelectionParserException.#ctor(System.String)">
            <summary>
            Construct with a message
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestSelectionParserException.#ctor(System.String,System.Exception)">
            <summary>
            Construct with a message and inner exception
            </summary>
            <param name="message"></param>
            <param name="innerException"></param>
        </member>
        <member name="M:NUnit.Engine.TestSelectionParserException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
            <summary>
            Serialization constructor
            </summary>
        </member>
    </members>
</doc>

tools\agents\net20\nunit.engine.core.dll

md5: 99C624656F449CD5323742EDF96D35C0 | sha1: AEC20F89B90C483A151145221C8DB2D7F62B18CC | sha256: 5C34D84C1BE82DD5C824FD3D9AAF046B48C74FBAA066819B818A21553AEA8C60 | sha512: 6167C163FF240B9234700D626F34B9A1E7E9E271D888E0B39F72EDF2893563041913675E5439E85F8378347B8188A9ABCC2FAF6D737647B61E56C6CFD4F03857

tools\agents\net20\testcentric.engine.metadata.dll

md5: 28FCEF2FE7F3D3430A5BEEB5A0E998A9 | sha1: 228D3569AA37BC5A60A50404E3D7371A870AC453 | sha256: 9B6975C9821F1BD152DE573516847CF0D7BFDE33A7DAE52553E8149A0CD490E4 | sha512: F1CB9E669C07187FD0AC0CE9556A05106164258633B610A0B76F57E7F2A98EC9A5BDB7DD0188714E3D5FA647AB7B7368BA1F1665D00994CA431F552DEB1956CE

tools\agents\net40\nunit-agent-x86.exe

md5: BE8B22E55FAE0CA2681E2213611935BA | sha1: 3083479B074E3D883521A45E4A6EB6618C3FF1F3 | sha256: 2FE2A8BD0160FD788F7F9C3BE1104D81BFF4570C0B183E11FC75A925C6F1B8A1 | sha512: 532D1BE90E157EBE66A6C62B7CE36C14BC6DD9EA4D2064B1361D6D86EA2A9D293443C191911FB156B86612F36C544022CA82825F923A54433753F7B37F22DE2C

tools\agents\net40\nunit-agent-x86.exe.config

<?xml version="1.0" encoding="utf-8"?>
<configuration>
  <!--
   Nunit-agent only runs under .NET 2.0 or higher. 
   The setting    useLegacyV2RuntimeActivationPolicy only applies 
   under .NET 4.0 and permits use of mixed mode assemblies, 
   which would otherwise not load correctly. 
  -->
  <startup useLegacyV2RuntimeActivationPolicy="true">
    <!--
     Nunit-agent is normally run by the console or gui
     runners and not independently. In normal usage, 
     the runner specifies which runtime should be used.
     
     Do NOT add any supportedRuntime elements here, 
     since they may prevent the runner from controlling 
     the runtime that is used!
    -->
  </startup>

  <runtime>
    <!-- Ensure that test exceptions don't crash NUnit -->
    <legacyUnhandledExceptionPolicy enabled="1" />

    <!--
     Since legacyUnhandledExceptionPolicy keeps the console from being killed even though an NUnit framework
     test worker thread is killed, this is needed to prevent a hang. NUnit framework can only handle these
     exceptions when this config element is present. (Or if future versions of NUnit framework drop support
     for partial trust which would enable it to use [HandleProcessCorruptedStateExceptions].)
    -->
    <legacyCorruptedStateExceptionsPolicy enabled="true" />

    <!-- Run partial trust V2 assemblies in full trust under .NET 4.0 -->
    <loadFromRemoteSources enabled="true" />

    <!-- Enable reading source information from Portable and Embedded PDBs when running applications -->
    <!-- built against previous .NET Framework versions on .NET Framework 4.7.2 -->
    <AppContextSwitchOverrides value="Switch.System.Diagnostics.IgnorePortablePDBsInStackTraces=false" />
  </runtime>
  
</configuration>

tools\agents\net40\nunit-agent-x86.exe.ignore

tools\agents\net40\nunit-agent.exe

md5: BCBD717CB51B053EFAEFB88D55A2A7B2 | sha1: 8AEAD13628C782303D1F77C14F9B90B8C5D66504 | sha256: A58B6EA242AC6D46DAF3ACEA6B64FDE1DB0469EA4E8C019DDA74BD1612CECD8F | sha512: 6581581E2EADDC8252272E4187F92A53CA0DCBD06F83C96368E52504A07E7091A2D6E206E734DC73B2EB9EEB7104C228BCE08D5C31DFF4082AD0729F8A00C937

tools\agents\net40\nunit-agent.exe.config

<?xml version="1.0" encoding="utf-8"?>
<configuration>
  <!--
   Nunit-agent only runs under .NET 2.0 or higher. 
   The setting    useLegacyV2RuntimeActivationPolicy only applies 
   under .NET 4.0 and permits use of mixed mode assemblies, 
   which would otherwise not load correctly. 
  -->
  <startup useLegacyV2RuntimeActivationPolicy="true">
    <!--
     Nunit-agent is normally run by the console or gui
     runners and not independently. In normal usage, 
     the runner specifies which runtime should be used.
     
     Do NOT add any supportedRuntime elements here, 
     since they may prevent the runner from controlling 
     the runtime that is used!
    -->
  </startup>

  <runtime>
    <!-- Ensure that test exceptions don't crash NUnit -->
    <legacyUnhandledExceptionPolicy enabled="1" />

    <!--
     Since legacyUnhandledExceptionPolicy keeps the console from being killed even though an NUnit framework
     test worker thread is killed, this is needed to prevent a hang. NUnit framework can only handle these
     exceptions when this config element is present. (Or if future versions of NUnit framework drop support
     for partial trust which would enable it to use [HandleProcessCorruptedStateExceptions].)
    -->
    <legacyCorruptedStateExceptionsPolicy enabled="true" />

    <!-- Run partial trust V2 assemblies in full trust under .NET 4.0 -->
    <loadFromRemoteSources enabled="true" />

    <!-- Enable reading source information from Portable and Embedded PDBs when running applications -->
    <!-- built against previous .NET Framework versions on .NET Framework 4.7.2 -->
    <AppContextSwitchOverrides value="Switch.System.Diagnostics.IgnorePortablePDBsInStackTraces=false" />
  </runtime>
  
</configuration>

tools\agents\net40\nunit-agent.exe.ignore

tools\agents\net40\nunit.agent.addins

tools\agents\net40\nunit.engine.api.dll

md5: 9D3782EAB4792DB1A2FD1C46B0959992 | sha1: DF037F908BCD8BD2DC7FF7DDA28F61476C0DA85E | sha256: 2781B49EFC0D37049C52FED23527FB78F71E974577E835D68D49284F66792135 | sha512: E7D3CADB36C76721FAEC3CBB59F873880888CD59C0E95E43BE4342F5FDD72D7908271DA469C4325B0EC799671D8DD93A0500022DBEF6DEA3B9AB26AB3AEB675A

tools\agents\net40\nunit.engine.api.xml

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>nunit.engine.api</name>
    </assembly>
    <members>
        <member name="T:NUnit.Engine.NUnitEngineException">
            <summary>
            NUnitEngineException is thrown when the engine has been
            called with improper values or when a particular facility
            is not available.
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineException.#ctor(System.String)">
            <summary>
            Construct with a message
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineException.#ctor(System.String,System.Exception)">
            <summary>
            Construct with a message and inner exception
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
            <summary>
            Serialization constructor
            </summary>
        </member>
        <member name="T:NUnit.Engine.NUnitEngineNotFoundException">
            <summary>
            The exception that is thrown if a valid test engine is not found
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineNotFoundException.#ctor">
            <summary>
            Initializes a new instance of the <see cref="T:NUnit.Engine.NUnitEngineNotFoundException"/> class.
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineNotFoundException.#ctor(System.Version)">
            <summary>
            Initializes a new instance of the <see cref="T:NUnit.Engine.NUnitEngineNotFoundException"/> class.
            </summary>
            <param name="minVersion">The minimum version.</param>
        </member>
        <member name="T:NUnit.Engine.NUnitEngineUnloadException">
            <summary>
            NUnitEngineUnloadException is thrown when a test run has completed successfully
            but one or more errors were encountered when attempting to unload
            and shut down the test run cleanly.
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineUnloadException.#ctor(System.String)">
            <summary>
            Construct with a message
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineUnloadException.#ctor(System.String,System.Exception)">
            <summary>
            Construct with a message and inner exception
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineUnloadException.#ctor(System.Collections.Generic.ICollection{System.Exception})">
            <summary>
            Construct with a message and a collection of exceptions.
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineUnloadException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
            <summary>
            Serialization constructor.
            </summary>
        </member>
        <member name="P:NUnit.Engine.NUnitEngineUnloadException.AggregatedExceptions">
            <summary>
            Gets the collection of exceptions .
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.ExtensionAttribute">
            <summary>
            The ExtensionAttribute is used to identify a class that is intended
            to serve as an extension.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.ExtensionAttribute.#ctor">
            <summary>
            Initializes a new instance of the <see cref="T:NUnit.Engine.Extensibility.ExtensionAttribute"/> class.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionAttribute.Path">
            <summary>
            A unique string identifying the ExtensionPoint for which this Extension is 
            intended. This is an optional field provided NUnit is able to deduce the
            ExtensionPoint from the Type of the extension class.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionAttribute.Description">
            <summary>
            An optional description of what the extension does.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionAttribute.Enabled">
            <summary>
            Flag indicating whether the extension is enabled.
            </summary>
            <value><c>true</c> if enabled; otherwise, <c>false</c>.</value>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionAttribute.EngineVersion">
            <summary>
            The minimum Engine version for which this extension is designed
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.ExtensionPointAttribute">
            <summary>
            ExtensionPointAttribute is used at the assembly level to identify and
            document any ExtensionPoints supported by the assembly.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.ExtensionPointAttribute.#ctor(System.String,System.Type)">
            <summary>
            Construct an ExtensionPointAttribute
            </summary>
            <param name="path">A unique string identifying the extension point.</param>
            <param name="type">The required Type of any extension that is installed at this extension point.</param>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionPointAttribute.Path">
            <summary>
            The unique string identifying this ExtensionPoint. This identifier
            is typically formatted as a path using '/' and the set of extension 
            points is sometimes viewed as forming a tree.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionPointAttribute.Type">
            <summary>
            The required Type (usually an interface) of any extension that is 
            installed at this ExtensionPoint.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionPointAttribute.Description">
            <summary>
            An optional description of the purpose of the ExtensionPoint
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.ExtensionPropertyAttribute">
            <summary>
            The ExtensionPropertyAttribute is used to specify named properties for an extension.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.ExtensionPropertyAttribute.#ctor(System.String,System.String)">
            <summary>
            Construct an ExtensionPropertyAttribute
            </summary>
            <param name="name">The name of the property</param>
            <param name="value">The property value</param>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionPropertyAttribute.Name">
            <summary>
            The name of the property.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionPropertyAttribute.Value">
            <summary>
            The property value
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IDriverFactory">
            <summary>
            Interface implemented by a Type that knows how to create a driver for a test assembly.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IDriverFactory.IsSupportedTestFramework(System.Reflection.AssemblyName)">
            <summary>
            Gets a flag indicating whether a given AssemblyName
            represents a test framework supported by this factory.
            </summary>
            <param name="reference">An AssemblyName referring to the possible test framework.</param>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IDriverFactory.GetDriver(System.AppDomain,System.Reflection.AssemblyName)">
            <summary>
            Gets a driver for a given test assembly and a framework
            which the assembly is already known to reference.
            </summary>
            <param name="domain">The domain in which the assembly will be loaded</param>
            <param name="reference">An AssemblyName referring to the test framework.</param>
            <returns></returns>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IExtensionNode">
            <summary>
            The IExtensionNode interface is implemented by a class that represents a
            single extension being installed on a particular extension point.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.TypeName">
            <summary>
            Gets the full name of the Type of the extension object.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.Enabled">
            <summary>
            Gets a value indicating whether this <see cref="T:NUnit.Engine.Extensibility.IExtensionNode"/> is enabled.
            </summary>
            <value><c>true</c> if enabled; otherwise, <c>false</c>.</value>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.Path">
            <summary>
            Gets the unique string identifying the ExtensionPoint for which
            this Extension is intended. This identifier may be supplied by the attribute
            marking the extension or deduced by NUnit from the Type of the extension class.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.Description">
            <summary>
            Gets an optional description of what the extension does.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.TargetFramework">
            <summary>
            The TargetFramework of the extension assembly.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.PropertyNames">
            <summary>
            Gets a collection of the names of all this extension's properties
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IExtensionNode.GetValues(System.String)">
            <summary>
            Gets a collection of the values of a particular named property
            If none are present, returns an empty enumerator.
            </summary>
            <param name="name">The property name</param>
            <returns>A collection of values</returns>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.AssemblyPath">
            <summary>
            The path to the assembly implementing this extension.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.AssemblyVersion">
            <summary>
            The version of the assembly implementing this extension.
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IExtensionPoint">
            <summary>
            An ExtensionPoint represents a single point in the TestEngine
            that may be extended by user addins and extensions.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionPoint.Path">
            <summary>
            Gets the unique path identifying this extension point.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionPoint.Description">
            <summary>
            Gets the description of this extension point. May be null.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionPoint.TypeName">
            <summary>
            Gets the FullName of the Type required for any extension to be installed at this extension point.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionPoint.Extensions">
            <summary>
            Gets an enumeration of IExtensionNodes for extensions installed on this extension point.
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IFrameworkDriver">
            <summary>
            The IFrameworkDriver interface is implemented by a class that
            is able to use an external framework to explore or run tests
            under the engine.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IFrameworkDriver.ID">
            <summary>
            Gets and sets the unique identifier for this driver,
            used to ensure that test ids are unique across drivers.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IFrameworkDriver.Load(System.String,System.Collections.Generic.IDictionary{System.String,System.Object})">
            <summary>
            Loads the tests in an assembly.
            </summary>
            <returns>An Xml string representing the loaded test</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IFrameworkDriver.CountTestCases(System.String)">
            <summary>
            Count the test cases that would be executed.
            </summary>
            <param name="filter">An XML string representing the TestFilter to use in counting the tests</param>
            <returns>The number of test cases counted</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IFrameworkDriver.Run(NUnit.Engine.ITestEventListener,System.String)">
            <summary>
            Executes the tests in an assembly.
            </summary>
            <param name="listener">An ITestEventHandler that receives progress notices</param>
            <param name="filter">A XML string representing the filter that controls which tests are executed</param>
            <returns>An Xml string representing the result</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IFrameworkDriver.Explore(System.String)">
            <summary>
            Returns information about the tests in an assembly.
            </summary>
            <param name="filter">An XML string representing the filter that controls which tests are included</param>
            <returns>An Xml string representing the tests</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IFrameworkDriver.StopRun(System.Boolean)">
            <summary>
            Cancel the ongoing test run. If no  test is running, the call is ignored.
            </summary>
            <param name="force">If true, cancel any ongoing test threads, otherwise wait for them to complete.</param>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IProject">
            <summary>
            Interface for the various project types that the engine can load.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IProject.ProjectPath">
            <summary>
            Gets the path to the file storing this project, if any.
            If the project has not been saved, this is null.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IProject.ActiveConfigName">
            <summary>
            Gets the active configuration, as defined
            by the particular project.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IProject.ConfigNames">
            <summary>
            Gets a list of the configs for this project
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IProject.GetTestPackage">
            <summary>
            Gets a test package for the primary or active
            configuration within the project. The package 
            includes all the assemblies and any settings
            specified in the project format.
            </summary>
            <returns>A TestPackage</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IProject.GetTestPackage(System.String)">
            <summary>
            Gets a TestPackage for a specific configuration
            within the project. The package includes all the
            assemblies and any settings specified in the 
            project format.
            </summary>
            <param name="configName">The name of the config to use</param>
            <returns>A TestPackage for the named configuration.</returns>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IProjectLoader">
            <summary>
            The IProjectLoader interface is implemented by any class
            that knows how to load projects in a specific format.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IProjectLoader.CanLoadFrom(System.String)">
            <summary>
            Returns true if the file indicated is one that this
            loader knows how to load.
            </summary>
            <param name="path">The path of the project file</param>
            <returns>True if the loader knows how to load this file, otherwise false</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IProjectLoader.LoadFrom(System.String)">
            <summary>
            Loads a project of a known format.
            </summary>
            <param name="path">The path of the project file</param>
            <returns>An IProject interface to the loaded project or null if the project cannot be loaded</returns>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IResultWriter">
            <summary>
            Common interface for objects that process and write out test results
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IResultWriter.CheckWritability(System.String)">
            <summary>
            Checks if the output path is writable. If the output is not
            writable, this method should throw an exception.
            </summary>
            <param name="outputPath"></param>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IResultWriter.WriteResultFile(System.Xml.XmlNode,System.String)">
            <summary>
            Writes result to the specified output path.
            </summary>
            <param name="resultNode">XmlNode for the result</param>
            <param name="outputPath">Path to which it should be written</param>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IResultWriter.WriteResultFile(System.Xml.XmlNode,System.IO.TextWriter)">
            <summary>
            Writes result to a TextWriter.
            </summary>
            <param name="resultNode">XmlNode for the result</param>
            <param name="writer">TextWriter to which it should be written</param>
        </member>
        <member name="T:NUnit.Engine.Extensibility.TypeExtensionPointAttribute">
            <summary>
            TypeExtensionPointAttribute is used to bind an extension point
            to a class or interface.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.TypeExtensionPointAttribute.#ctor(System.String)">
            <summary>
            Construct a TypeExtensionPointAttribute, specifying the path.
            </summary>
            <param name="path">A unique string identifying the extension point.</param>
        </member>
        <member name="M:NUnit.Engine.Extensibility.TypeExtensionPointAttribute.#ctor">
            <summary>
            Construct an TypeExtensionPointAttribute, without specifying the path.
            The extension point will use a path constructed based on the interface
            or class to which the attribute is applied.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.TypeExtensionPointAttribute.Path">
            <summary>
            The unique string identifying this ExtensionPoint. This identifier
            is typically formatted as a path using '/' and the set of extension 
            points is sometimes viewed as forming a tree.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.TypeExtensionPointAttribute.Description">
            <summary>
            An optional description of the purpose of the ExtensionPoint
            </summary>
        </member>
        <member name="T:NUnit.Engine.IAvailableRuntimes">
            <summary>
            Interface that returns a list of available runtime frameworks.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IAvailableRuntimes.AvailableRuntimes">
            <summary>
            Gets a list of available runtime frameworks.
            </summary>
        </member>
        <member name="T:NUnit.Engine.IExtensionService">
            <summary>
            The IExtensionService interface allows a runner to manage extensions.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IExtensionService.ExtensionPoints">
            <summary>
            Gets an enumeration of all ExtensionPoints in the engine.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IExtensionService.Extensions">
            <summary>
            Gets an enumeration of all installed Extensions.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IExtensionService.GetExtensionPoint(System.String)">
            <summary>
            Get an ExtensionPoint based on its unique identifying path.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IExtensionService.GetExtensionNodes(System.String)">
            <summary>
            Get an enumeration of ExtensionNodes based on their identifying path.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IExtensionService.EnableExtension(System.String,System.Boolean)">
            <summary>
            Enable or disable an extension
            </summary>
            <param name="typeName"></param>
            <param name="enabled"></param>
        </member>
        <member name="T:NUnit.Engine.ILogger">
            <summary>
            Interface for logging within the engine
            </summary>
        </member>
        <member name="M:NUnit.Engine.ILogger.Error(System.String)">
            <summary>
            Logs the specified message at the error level.
            </summary>
            <param name="message">The message.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Error(System.String,System.Object[])">
            <summary>
            Logs the specified message at the error level.
            </summary>
            <param name="format">The message.</param>
            <param name="args">The arguments.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Warning(System.String)">
            <summary>
            Logs the specified message at the warning level.
            </summary>
            <param name="message">The message.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Warning(System.String,System.Object[])">
            <summary>
            Logs the specified message at the warning level.
            </summary>
            <param name="format">The message.</param>
            <param name="args">The arguments.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Info(System.String)">
            <summary>
            Logs the specified message at the info level.
            </summary>
            <param name="message">The message.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Info(System.String,System.Object[])">
            <summary>
            Logs the specified message at the info level.
            </summary>
            <param name="format">The message.</param>
            <param name="args">The arguments.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Debug(System.String)">
            <summary>
            Logs the specified message at the debug level.
            </summary>
            <param name="message">The message.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Debug(System.String,System.Object[])">
            <summary>
            Logs the specified message at the debug level.
            </summary>
            <param name="format">The message.</param>
            <param name="args">The arguments.</param>
        </member>
        <member name="T:NUnit.Engine.ILogging">
            <summary>
            Interface to abstract getting loggers
            </summary>
        </member>
        <member name="M:NUnit.Engine.ILogging.GetLogger(System.String)">
            <summary>
            Gets the logger.
            </summary>
            <param name="name">The name of the logger to get.</param>
            <returns></returns>
        </member>
        <member name="T:NUnit.Engine.InternalTraceLevel">
            <summary>
            InternalTraceLevel is an enumeration controlling the
            level of detailed presented in the internal log.
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Default">
            <summary>
            Use the default settings as specified by the user.
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Off">
            <summary>
            Do not display any trace messages
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Error">
            <summary>
            Display Error messages only
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Warning">
            <summary>
            Display Warning level and higher messages
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Info">
            <summary>
            Display informational and higher messages
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Debug">
            <summary>
            Display debug messages and higher - i.e. all messages
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Verbose">
            <summary>
            Display debug messages and higher - i.e. all messages
            </summary>
        </member>
        <member name="T:NUnit.Engine.IRecentFiles">
            <summary>
            The IRecentFiles interface is used to isolate the app
            from various implementations of recent files.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRecentFiles.MaxFiles">
            <summary>
            The max number of files saved
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRecentFiles.Entries">
            <summary>
            Get a list of all the file entries
            </summary>
            <returns>The most recent file list</returns>
        </member>
        <member name="M:NUnit.Engine.IRecentFiles.SetMostRecent(System.String)">
            <summary>
            Set the most recent file name, reordering
            the saved names as needed and removing the oldest
            if the max number of files would be exceeded.
            The current CLR version is used to create the entry.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IRecentFiles.Remove(System.String)">
            <summary>
            Remove a file from the list
            </summary>
            <param name="fileName">The name of the file to remove</param>
        </member>
        <member name="T:NUnit.Engine.IResultService">
            <summary>
            IResultWriterService provides result writers for a specified
            well-known format.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IResultService.Formats">
            <summary>
            Gets an array of the available formats
            </summary>
        </member>
        <member name="M:NUnit.Engine.IResultService.GetResultWriter(System.String,System.Object[])">
            <summary>
            Gets a ResultWriter for a given format and set of arguments.
            </summary>
            <param name="format">The name of the format to be used</param>
            <param name="args">A set of arguments to be used in constructing the writer or null if non arguments are needed</param>
            <returns>An IResultWriter</returns>
        </member>
        <member name="T:NUnit.Engine.IRuntimeFramework">
            <summary>
            Interface implemented by objects representing a runtime framework.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRuntimeFramework.Id">
            <summary>
            Gets the inique Id for this runtime, such as "net-4.5"
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRuntimeFramework.DisplayName">
            <summary>
            Gets the display name of the framework, such as ".NET 4.5"
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRuntimeFramework.FrameworkVersion">
            <summary>
            Gets the framework version: usually contains two components, Major
            and Minor, which match the corresponding CLR components, but not always.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRuntimeFramework.ClrVersion">
            <summary>
            Gets the Version of the CLR for this framework
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRuntimeFramework.Profile">
            <summary>
            Gets a string representing the particular profile installed,
            or null if there is no profile. Currently. the only defined 
            values are Full and Client.
            </summary>
        </member>
        <member name="T:NUnit.Engine.IRuntimeFrameworkService">
            <summary>
            Implemented by a type that provides information about the
            current and other available runtimes.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IRuntimeFrameworkService.IsAvailable(System.String)">
            <summary>
            Returns true if the runtime framework represented by
            the string passed as an argument is available.
            </summary>
            <param name="framework">A string representing a framework, like 'net-4.0'</param>
            <returns>True if the framework is available, false if unavailable or nonexistent</returns>
        </member>
        <member name="M:NUnit.Engine.IRuntimeFrameworkService.SelectRuntimeFramework(NUnit.Engine.TestPackage)">
             <summary>
             Selects a target runtime framework for a TestPackage based on
             the settings in the package and the assemblies themselves.
             The package RuntimeFramework setting may be updated as a 
             result and the selected runtime is returned.
            
             Note that if a package has subpackages, the subpackages may run on a different
             framework to the top-level package. In future, this method should
             probably not return a simple string, and instead require runners
             to inspect the test package structure, to find all desired frameworks.
             </summary>
             <param name="package">A TestPackage</param>
             <returns>The selected RuntimeFramework</returns>
        </member>
        <member name="T:NUnit.Engine.ServiceStatus">
            <summary>
            Enumeration representing the status of a service
            </summary>
        </member>
        <member name="F:NUnit.Engine.ServiceStatus.Stopped">
            <summary>Service was never started or has been stopped</summary>
        </member>
        <member name="F:NUnit.Engine.ServiceStatus.Started">
            <summary>Started successfully</summary>
        </member>
        <member name="F:NUnit.Engine.ServiceStatus.Error">
            <summary>Service failed to start and is unavailable</summary>
        </member>
        <member name="T:NUnit.Engine.IService">
            <summary>
            The IService interface is implemented by all Services. Although it
            is extensible, it does not reside in the Extensibility namespace
            because it is so widely used by the engine.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IService.ServiceContext">
            <summary>
            The ServiceContext
            </summary>
        </member>
        <member name="P:NUnit.Engine.IService.Status">
            <summary>
            Gets the ServiceStatus of this service
            </summary>
        </member>
        <member name="M:NUnit.Engine.IService.StartService">
            <summary>
            Initialize the Service
            </summary>
        </member>
        <member name="M:NUnit.Engine.IService.StopService">
            <summary>
            Do any cleanup needed before terminating the service
            </summary>
        </member>
        <member name="T:NUnit.Engine.IServiceLocator">
            <summary>
            IServiceLocator allows clients to locate any NUnit services
            for which the interface is referenced. In normal use, this
            linits it to those services using interfaces defined in the 
            nunit.engine.api assembly.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IServiceLocator.GetService``1">
            <summary>
            Return a specified type of service
            </summary>
        </member>
        <member name="M:NUnit.Engine.IServiceLocator.GetService(System.Type)">
            <summary>
            Return a specified type of service
            </summary>
        </member>
        <member name="T:NUnit.Engine.SettingsEventHandler">
            <summary>
            Event handler for settings changes
            </summary>
            <param name="sender">The sender.</param>
            <param name="args">The <see cref="T:NUnit.Engine.SettingsEventArgs"/> instance containing the event data.</param>
        </member>
        <member name="T:NUnit.Engine.SettingsEventArgs">
            <summary>
            Event argument for settings changes
            </summary>
        </member>
        <member name="M:NUnit.Engine.SettingsEventArgs.#ctor(System.String)">
            <summary>
            Initializes a new instance of the <see cref="T:NUnit.Engine.SettingsEventArgs"/> class.
            </summary>
            <param name="settingName">Name of the setting that has changed.</param>
        </member>
        <member name="P:NUnit.Engine.SettingsEventArgs.SettingName">
            <summary>
            Gets the name of the setting that has changed
            </summary>
        </member>
        <member name="T:NUnit.Engine.ISettings">
            <summary>
            The ISettings interface is used to access all user
            settings and options.
            </summary>
        </member>
        <member name="E:NUnit.Engine.ISettings.Changed">
            <summary>
            Occurs when the settings are changed.
            </summary>
        </member>
        <member name="M:NUnit.Engine.ISettings.GetSetting(System.String)">
            <summary>
            Load a setting from the storage.
            </summary>
            <param name="settingName">Name of the setting to load</param>
            <returns>Value of the setting or null</returns>
        </member>
        <member name="M:NUnit.Engine.ISettings.GetSetting``1(System.String,``0)">
            <summary>
            Load a setting from the storage or return a default value
            </summary>
            <param name="settingName">Name of the setting to load</param>
            <param name="defaultValue">Value to return if the setting is missing</param>
            <returns>Value of the setting or the default value</returns>
        </member>
        <member name="M:NUnit.Engine.ISettings.RemoveSetting(System.String)">
            <summary>
            Remove a setting from the storage
            </summary>
            <param name="settingName">Name of the setting to remove</param>
        </member>
        <member name="M:NUnit.Engine.ISettings.RemoveGroup(System.String)">
            <summary>
            Remove an entire group of settings from the storage
            </summary>
            <param name="groupName">Name of the group to remove</param>
        </member>
        <member name="M:NUnit.Engine.ISettings.SaveSetting(System.String,System.Object)">
            <summary>
            Save a setting in the storage
            </summary>
            <param name="settingName">Name of the setting to save</param>
            <param name="settingValue">Value to be saved</param>
        </member>
        <member name="T:NUnit.Engine.ITestEngine">
            <summary>
            ITestEngine represents an instance of the test engine.
            Clients wanting to discover, explore or run tests start
            require an instance of the engine, which is generally
            acquired from the TestEngineActivator class.
            </summary>
        </member>
        <member name="P:NUnit.Engine.ITestEngine.Services">
            <summary>
            Gets the IServiceLocator interface, which gives access to
            certain services provided by the engine.
            </summary>
        </member>
        <member name="P:NUnit.Engine.ITestEngine.WorkDirectory">
            <summary>
            Gets and sets the directory path used by the engine for saving files.
            Some services may ignore changes to this path made after initialization.
            The default value is the current directory.
            </summary>
        </member>
        <member name="P:NUnit.Engine.ITestEngine.InternalTraceLevel">
            <summary>
            Gets and sets the InternalTraceLevel used by the engine. Changing this
            setting after initialization will have no effect. The default value
            is the value saved in the NUnit settings.
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestEngine.Initialize">
             <summary>
             Initialize the engine. This includes initializing mono addins,
             setting the trace level and creating the standard set of services
             used in the Engine.
            
             This interface is not normally called by user code. Programs linking
             only to the nunit.engine.api assembly are given a
             pre-initialized instance of TestEngine. Programs
             that link directly to nunit.engine usually do so
             in order to perform custom initialization.
             </summary>
        </member>
        <member name="M:NUnit.Engine.ITestEngine.GetRunner(NUnit.Engine.TestPackage)">
            <summary>
            Returns a test runner instance for use by clients in discovering,
            exploring and executing tests.
            </summary>
            <param name="package">The TestPackage for which the runner is intended.</param>
            <returns>An ITestRunner.</returns>
        </member>
        <member name="T:NUnit.Engine.ITestEventListener">
            <summary>
            The ITestListener interface is used to receive notices of significant
            events while a test is running. Its single method accepts an Xml string,
            which may represent any event generated by the test framework, the driver
            or any of the runners internal to the engine. Use of Xml means that
            any driver and framework may add additional events and the engine will
            simply pass them on through this interface.
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestEventListener.OnTestEvent(System.String)">
            <summary>
            Handle a progress report or other event.
            </summary>
            <param name="report">An XML progress report.</param>
        </member>
        <member name="T:NUnit.Engine.ITestFilterBuilder">
            <summary>
            Interface to a TestFilterBuilder, which is used to create TestFilters
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestFilterBuilder.AddTest(System.String)">
            <summary>
            Add a test to be selected
            </summary>
            <param name="fullName">The full name of the test, as created by NUnit</param>
        </member>
        <member name="M:NUnit.Engine.ITestFilterBuilder.SelectWhere(System.String)">
            <summary>
            Specify what is to be included by the filter using a where clause.
            </summary>
            <param name="whereClause">A where clause that will be parsed by NUnit to create the filter.</param>
        </member>
        <member name="M:NUnit.Engine.ITestFilterBuilder.GetFilter">
            <summary>
            Get a TestFilter constructed according to the criteria specified by the other calls.
            </summary>
            <returns>A TestFilter.</returns>
        </member>
        <member name="T:NUnit.Engine.ITestFilterService">
            <summary>
            The TestFilterService provides builders that can create TestFilters
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestFilterService.GetTestFilterBuilder">
            <summary>
            Get an uninitialized TestFilterBuilder
            </summary>
        </member>
        <member name="T:NUnit.Engine.ITestRun">
            <summary>
            The ITestRun class represents an ongoing test run.
            </summary>
        </member>
        <member name="P:NUnit.Engine.ITestRun.Result">
            <summary>
            Get the result of the test.
            </summary>
            <returns>An XmlNode representing the test run result</returns>
        </member>
        <member name="M:NUnit.Engine.ITestRun.Wait(System.Int32)">
            <summary>
            Blocks the current thread until the current test run completes
            or the timeout is reached
            </summary>
            <param name="timeout">A <see cref="T:System.Int32"/> that represents the number of milliseconds to wait or -1 milliseconds to wait indefinitely. </param>
            <returns>True if the run completed</returns>
        </member>
        <member name="T:NUnit.Engine.ITestRunner">
            <summary>
            Interface implemented by all test runners.
            </summary>
        </member>
        <member name="P:NUnit.Engine.ITestRunner.IsTestRunning">
            <summary>
            Get a flag indicating whether a test is running
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.Load">
            <summary>
            Load a TestPackage for possible execution
            </summary>
            <returns>An XmlNode representing the loaded package.</returns>
            <remarks>
            This method is normally optional, since Explore and Run call
            it automatically when necessary. The method is kept in order
            to make it easier to convert older programs that use it.
            </remarks>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.Unload">
            <summary>
            Unload any loaded TestPackage. If none is loaded,
            the call is ignored.
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.Reload">
            <summary>
            Reload the current TestPackage
            </summary>
            <returns>An XmlNode representing the loaded package.</returns>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.CountTestCases(NUnit.Engine.TestFilter)">
            <summary>
            Count the test cases that would be run under
            the specified filter.
            </summary>
            <param name="filter">A TestFilter</param>
            <returns>The count of test cases</returns>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.Run(NUnit.Engine.ITestEventListener,NUnit.Engine.TestFilter)">
            <summary>
            Run the tests in the loaded TestPackage and return a test result. The tests
            are run synchronously and the listener interface is notified as it progresses.
            </summary>
            <param name="listener">The listener that is notified as the run progresses</param>
            <param name="filter">A TestFilter used to select tests</param>
            <returns>An XmlNode giving the result of the test execution</returns>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.RunAsync(NUnit.Engine.ITestEventListener,NUnit.Engine.TestFilter)">
            <summary>
            Start a run of the tests in the loaded TestPackage. The tests are run
            asynchronously and the listener interface is notified as it progresses.
            </summary>
            <param name="listener">The listener that is notified as the run progresses</param>
            <param name="filter">A TestFilter used to select tests</param>
            <returns></returns>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.StopRun(System.Boolean)">
            <summary>
            Cancel the ongoing test run. If no  test is running, the call is ignored.
            </summary>
            <param name="force">If true, cancel any ongoing test threads, otherwise wait for them to complete.</param>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.Explore(NUnit.Engine.TestFilter)">
            <summary>
            Explore a loaded TestPackage and return information about the tests found.
            </summary>
            <param name="filter">The TestFilter to be used in selecting tests to explore.</param>
            <returns>An XmlNode representing the tests found.</returns>
        </member>
        <member name="T:NUnit.Engine.TestEngineActivator">
            <summary>
            TestEngineActivator creates an instance of the test engine and returns an ITestEngine interface.
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestEngineActivator.CreateInstance(System.Boolean)">
            <summary>
            Create an instance of the test engine.
            </summary>
            <param name="unused">This parameter is no longer used but has not been removed to ensure API compatibility.</param>
            <exception cref="T:NUnit.Engine.NUnitEngineNotFoundException">Thrown when a test engine of the required minimum version is not found</exception>
            <returns>An <see cref="T:NUnit.Engine.ITestEngine"/></returns>
        </member>
        <member name="M:NUnit.Engine.TestEngineActivator.CreateInstance(System.Version,System.Boolean)">
            <summary>
            Create an instance of the test engine with a minimum version.
            </summary>
            <param name="minVersion">The minimum version of the engine to return inclusive.</param>
            <param name="unused">This parameter is no longer used but has not been removed to ensure API compatibility.</param>
            <exception cref="T:NUnit.Engine.NUnitEngineNotFoundException">Thrown when a test engine of the required minimum version is not found</exception>
            <returns>An <see cref="T:NUnit.Engine.ITestEngine"/></returns>
        </member>
        <member name="T:NUnit.Engine.TestFilter">
            <summary>
            Abstract base for all test filters. A filter is represented
            by an XmlNode with &lt;filter&gt; as its topmost element.
            In the console runner, filters serve only to carry this
            XML representation, as all filtering is done by the engine.
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestFilter.#ctor(System.String)">
            <summary>
            Initializes a new instance of the <see cref="T:NUnit.Engine.TestFilter"/> class.
            </summary>
            <param name="xmlText">The XML text that specifies the filter.</param>
        </member>
        <member name="F:NUnit.Engine.TestFilter.Empty">
            <summary>
            The empty filter - one that always passes.
            </summary>
        </member>
        <member name="P:NUnit.Engine.TestFilter.Text">
            <summary>
            Gets the XML representation of this filter as a string.
            </summary>
        </member>
        <member name="T:NUnit.Engine.TestPackage">
            <summary>
            TestPackage holds information about a set of test files to
            be loaded by a TestRunner. Each TestPackage represents
            tests for one or more test files. TestPackages may be named
            or anonymous, depending on the constructor used.
            
            Upon construction, a package is given an ID (string), which
            remains unchanged for the lifetime of the TestPackage instance.
            The package ID is passed to the test framework for use in generating
            test IDs.
            
            A runner that reloads test assemblies and wants the ids to remain stable
            should avoid creating a new package but should instead use the original
            package, changing settings as needed. This gives the best chance for the
            tests in the reloaded assembly to match those originally loaded.
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestPackage.#ctor(System.String)">
            <summary>
            Construct a named TestPackage, specifying a file path for
            the assembly or project to be used.
            </summary>
            <param name="filePath">The file path.</param>
        </member>
        <member name="M:NUnit.Engine.TestPackage.#ctor(System.Collections.Generic.IList{System.String})">
            <summary>
            Construct an anonymous TestPackage that wraps test files.
            </summary>
            <param name="testFiles"></param>
        </member>
        <member name="P:NUnit.Engine.TestPackage.ID">
            <summary>
            Every test package gets a unique ID used to prefix test IDs within that package.
            </summary>
            <remarks>
            The generated ID is only unique for packages created within the same application domain.
            For that reason, NUnit pre-creates all test packages that will be needed.
            </remarks>
        </member>
        <member name="P:NUnit.Engine.TestPackage.Name">
            <summary>
            Gets the name of the package
            </summary>
        </member>
        <member name="P:NUnit.Engine.TestPackage.FullName">
            <summary>
            Gets the path to the file containing tests. It may be
            an assembly or a recognized project type.
            </summary>
        </member>
        <member name="P:NUnit.Engine.TestPackage.SubPackages">
            <summary>
            Gets the list of SubPackages contained in this package
            </summary>
        </member>
        <member name="P:NUnit.Engine.TestPackage.Settings">
            <summary>
            Gets the settings dictionary for this package.
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestPackage.AddSubPackage(NUnit.Engine.TestPackage)">
            <summary>
            Add a subproject to the package.
            </summary>
            <param name="subPackage">The subpackage to be added</param>
        </member>
        <member name="M:NUnit.Engine.TestPackage.AddSetting(System.String,System.Object)">
            <summary>
            Add a setting to a package and all of its subpackages.
            </summary>
            <param name="name">The name of the setting</param>
            <param name="value">The value of the setting</param>
            <remarks>
            Once a package is created, subpackages may have been created
            as well. If you add a setting directly to the Settings dictionary
            of the package, the subpackages are not updated. This method is
            used when the settings are intended to be reflected to all the
            subpackages under the package.
            </remarks>
        </member>
        <member name="M:NUnit.Engine.TestPackage.GetSetting``1(System.String,``0)">
            <summary>
            Return the value of a setting or a default.
            </summary>
            <param name="name">The name of the setting</param>
            <param name="defaultSetting">The default value</param>
            <returns></returns>
        </member>
        <member name="T:NUnit.Engine.TestSelectionParserException">
            <summary>
            TestSelectionParserException is thrown when an error
            is found while parsing the selection expression.
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestSelectionParserException.#ctor(System.String)">
            <summary>
            Construct with a message
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestSelectionParserException.#ctor(System.String,System.Exception)">
            <summary>
            Construct with a message and inner exception
            </summary>
            <param name="message"></param>
            <param name="innerException"></param>
        </member>
        <member name="M:NUnit.Engine.TestSelectionParserException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
            <summary>
            Serialization constructor
            </summary>
        </member>
    </members>
</doc>

tools\agents\net40\nunit.engine.core.dll

md5: 99C624656F449CD5323742EDF96D35C0 | sha1: AEC20F89B90C483A151145221C8DB2D7F62B18CC | sha256: 5C34D84C1BE82DD5C824FD3D9AAF046B48C74FBAA066819B818A21553AEA8C60 | sha512: 6167C163FF240B9234700D626F34B9A1E7E9E271D888E0B39F72EDF2893563041913675E5439E85F8378347B8188A9ABCC2FAF6D737647B61E56C6CFD4F03857

tools\agents\net40\testcentric.engine.metadata.dll

md5: AFB706BB8A410141C456B14CA1BB157C | sha1: D195A7871A0F5F19E7A20B29DFBA6DBA963C9D5E | sha256: B08BF44FD3270243DEF47673D606959915BA723DB7E694E58CB44A92145B0EBB | sha512: 0459AA934170CA905174458EF7D05575AE23516030C3AEDE39516E6577BFC591FB17C10DFA9FA24A0E75B39DB236467FD14D0E28BAAA10FB762B9F91D7E81FFD

tools\agents\netcoreapp3.1\nunit-agent.deps.json

{
  "runtimeTarget": {
    "name": ".NETCoreApp,Version=v3.1",
    "signature": ""
  },
  "compilationOptions": {},
  "targets": {
    ".NETCoreApp,Version=v3.1": {
      "nunit-agent/1.0.0": {
        "dependencies": {
          "nunit.engine.api": "3.13.0",
          "nunit.engine.core": "3.13.0"
        },
        "runtime": {
          "nunit-agent.dll": {}
        }
      },
      "Microsoft.NETCore.Platforms/1.1.0": {},
      "Microsoft.NETCore.Targets/1.1.0": {},
      "Microsoft.Win32.Registry/4.3.0": {
        "dependencies": {
          "Microsoft.NETCore.Platforms": "1.1.0",
          "System.Collections": "4.3.0",
          "System.Globalization": "4.3.0",
          "System.Resources.ResourceManager": "4.3.0",
          "System.Runtime": "4.3.0",
          "System.Runtime.Extensions": "4.3.0",
          "System.Runtime.Handles": "4.3.0",
          "System.Runtime.InteropServices": "4.3.0"
        }
      },
      "System.Collections/4.3.0": {
        "dependencies": {
          "Microsoft.NETCore.Platforms": "1.1.0",
          "Microsoft.NETCore.Targets": "1.1.0",
          "System.Runtime": "4.3.0"
        }
      },
      "System.Globalization/4.3.0": {
        "dependencies": {
          "Microsoft.NETCore.Platforms": "1.1.0",
          "Microsoft.NETCore.Targets": "1.1.0",
          "System.Runtime": "4.3.0"
        }
      },
      "System.IO/4.3.0": {
        "dependencies": {
          "Microsoft.NETCore.Platforms": "1.1.0",
          "Microsoft.NETCore.Targets": "1.1.0",
          "System.Runtime": "4.3.0",
          "System.Text.Encoding": "4.3.0",
          "System.Threading.Tasks": "4.3.0"
        }
      },
      "System.Reflection/4.3.0": {
        "dependencies": {
          "Microsoft.NETCore.Platforms": "1.1.0",
          "Microsoft.NETCore.Targets": "1.1.0",
          "System.IO": "4.3.0",
          "System.Reflection.Primitives": "4.3.0",
          "System.Runtime": "4.3.0"
        }
      },
      "System.Reflection.Primitives/4.3.0": {
        "dependencies": {
          "Microsoft.NETCore.Platforms": "1.1.0",
          "Microsoft.NETCore.Targets": "1.1.0",
          "System.Runtime": "4.3.0"
        }
      },
      "System.Resources.ResourceManager/4.3.0": {
        "dependencies": {
          "Microsoft.NETCore.Platforms": "1.1.0",
          "Microsoft.NETCore.Targets": "1.1.0",
          "System.Globalization": "4.3.0",
          "System.Reflection": "4.3.0",
          "System.Runtime": "4.3.0"
        }
      },
      "System.Runtime/4.3.0": {
        "dependencies": {
          "Microsoft.NETCore.Platforms": "1.1.0",
          "Microsoft.NETCore.Targets": "1.1.0"
        }
      },
      "System.Runtime.Extensions/4.3.0": {
        "dependencies": {
          "Microsoft.NETCore.Platforms": "1.1.0",
          "Microsoft.NETCore.Targets": "1.1.0",
          "System.Runtime": "4.3.0"
        }
      },
      "System.Runtime.Handles/4.3.0": {
        "dependencies": {
          "Microsoft.NETCore.Platforms": "1.1.0",
          "Microsoft.NETCore.Targets": "1.1.0",
          "System.Runtime": "4.3.0"
        }
      },
      "System.Runtime.InteropServices/4.3.0": {
        "dependencies": {
          "Microsoft.NETCore.Platforms": "1.1.0",
          "Microsoft.NETCore.Targets": "1.1.0",
          "System.Reflection": "4.3.0",
          "System.Reflection.Primitives": "4.3.0",
          "System.Runtime": "4.3.0",
          "System.Runtime.Handles": "4.3.0"
        }
      },
      "System.Text.Encoding/4.3.0": {
        "dependencies": {
          "Microsoft.NETCore.Platforms": "1.1.0",
          "Microsoft.NETCore.Targets": "1.1.0",
          "System.Runtime": "4.3.0"
        }
      },
      "System.Threading.Tasks/4.3.0": {
        "dependencies": {
          "Microsoft.NETCore.Platforms": "1.1.0",
          "Microsoft.NETCore.Targets": "1.1.0",
          "System.Runtime": "4.3.0"
        }
      },
      "TestCentric.Metadata/1.7.1": {
        "runtime": {
          "lib/netstandard2.0/testcentric.engine.metadata.dll": {
            "assemblyVersion": "1.7.1.0",
            "fileVersion": "1.7.1.0"
          }
        }
      },
      "nunit.engine.api/3.13.0": {
        "runtime": {
          "nunit.engine.api.dll": {}
        }
      },
      "nunit.engine.core/3.13.0": {
        "dependencies": {
          "Microsoft.Win32.Registry": "4.3.0",
          "TestCentric.Metadata": "1.7.1",
          "nunit.engine.api": "3.13.0"
        },
        "runtime": {
          "nunit.engine.core.dll": {}
        }
      }
    }
  },
  "libraries": {
    "nunit-agent/1.0.0": {
      "type": "project",
      "serviceable": false,
      "sha512": ""
    },
    "Microsoft.NETCore.Platforms/1.1.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-kz0PEW2lhqygehI/d6XsPCQzD7ff7gUJaVGPVETX611eadGsA3A877GdSlU0LRVMCTH/+P3o2iDTak+S08V2+A==",
      "path": "microsoft.netcore.platforms/1.1.0",
      "hashPath": "microsoft.netcore.platforms.1.1.0.nupkg.sha512"
    },
    "Microsoft.NETCore.Targets/1.1.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-aOZA3BWfz9RXjpzt0sRJJMjAscAUm3Hoa4UWAfceV9UTYxgwZ1lZt5nO2myFf+/jetYQo4uTP7zS8sJY67BBxg==",
      "path": "microsoft.netcore.targets/1.1.0",
      "hashPath": "microsoft.netcore.targets.1.1.0.nupkg.sha512"
    },
    "Microsoft.Win32.Registry/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-Lw1/VwLH1yxz6SfFEjVRCN0pnflLEsWgnV4qsdJ512/HhTwnKXUG+zDQ4yTO3K/EJQemGoNaBHX5InISNKTzUQ==",
      "path": "microsoft.win32.registry/4.3.0",
      "hashPath": "microsoft.win32.registry.4.3.0.nupkg.sha512"
    },
    "System.Collections/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-3Dcj85/TBdVpL5Zr+gEEBUuFe2icOnLalmEh9hfck1PTYbbyWuZgh4fmm2ysCLTrqLQw6t3TgTyJ+VLp+Qb+Lw==",
      "path": "system.collections/4.3.0",
      "hashPath": "system.collections.4.3.0.nupkg.sha512"
    },
    "System.Globalization/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-kYdVd2f2PAdFGblzFswE4hkNANJBKRmsfa2X5LG2AcWE1c7/4t0pYae1L8vfZ5xvE2nK/R9JprtToA61OSHWIg==",
      "path": "system.globalization/4.3.0",
      "hashPath": "system.globalization.4.3.0.nupkg.sha512"
    },
    "System.IO/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-3qjaHvxQPDpSOYICjUoTsmoq5u6QJAFRUITgeT/4gqkF1bajbSmb1kwSxEA8AHlofqgcKJcM8udgieRNhaJ5Cg==",
      "path": "system.io/4.3.0",
      "hashPath": "system.io.4.3.0.nupkg.sha512"
    },
    "System.Reflection/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-KMiAFoW7MfJGa9nDFNcfu+FpEdiHpWgTcS2HdMpDvt9saK3y/G4GwprPyzqjFH9NTaGPQeWNHU+iDlDILj96aQ==",
      "path": "system.reflection/4.3.0",
      "hashPath": "system.reflection.4.3.0.nupkg.sha512"
    },
    "System.Reflection.Primitives/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-5RXItQz5As4xN2/YUDxdpsEkMhvw3e6aNveFXUn4Hl/udNTCNhnKp8lT9fnc3MhvGKh1baak5CovpuQUXHAlIA==",
      "path": "system.reflection.primitives/4.3.0",
      "hashPath": "system.reflection.primitives.4.3.0.nupkg.sha512"
    },
    "System.Resources.ResourceManager/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-/zrcPkkWdZmI4F92gL/TPumP98AVDu/Wxr3CSJGQQ+XN6wbRZcyfSKVoPo17ilb3iOr0cCRqJInGwNMolqhS8A==",
      "path": "system.resources.resourcemanager/4.3.0",
      "hashPath": "system.resources.resourcemanager.4.3.0.nupkg.sha512"
    },
    "System.Runtime/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-JufQi0vPQ0xGnAczR13AUFglDyVYt4Kqnz1AZaiKZ5+GICq0/1MH/mO/eAJHt/mHW1zjKBJd7kV26SrxddAhiw==",
      "path": "system.runtime/4.3.0",
      "hashPath": "system.runtime.4.3.0.nupkg.sha512"
    },
    "System.Runtime.Extensions/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-guW0uK0fn5fcJJ1tJVXYd7/1h5F+pea1r7FLSOz/f8vPEqbR2ZAknuRDvTQ8PzAilDveOxNjSfr0CHfIQfFk8g==",
      "path": "system.runtime.extensions/4.3.0",
      "hashPath": "system.runtime.extensions.4.3.0.nupkg.sha512"
    },
    "System.Runtime.Handles/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-OKiSUN7DmTWeYb3l51A7EYaeNMnvxwE249YtZz7yooT4gOZhmTjIn48KgSsw2k2lYdLgTKNJw/ZIfSElwDRVgg==",
      "path": "system.runtime.handles/4.3.0",
      "hashPath": "system.runtime.handles.4.3.0.nupkg.sha512"
    },
    "System.Runtime.InteropServices/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-uv1ynXqiMK8mp1GM3jDqPCFN66eJ5w5XNomaK2XD+TuCroNTLFGeZ+WCmBMcBDyTFKou3P6cR6J/QsaqDp7fGQ==",
      "path": "system.runtime.interopservices/4.3.0",
      "hashPath": "system.runtime.interopservices.4.3.0.nupkg.sha512"
    },
    "System.Text.Encoding/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-BiIg+KWaSDOITze6jGQynxg64naAPtqGHBwDrLaCtixsa5bKiR8dpPOHA7ge3C0JJQizJE+sfkz1wV+BAKAYZw==",
      "path": "system.text.encoding/4.3.0",
      "hashPath": "system.text.encoding.4.3.0.nupkg.sha512"
    },
    "System.Threading.Tasks/4.3.0": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-LbSxKEdOUhVe8BezB/9uOGGppt+nZf6e1VFyw6v3DN6lqitm0OSn2uXMOdtP0M3W4iMcqcivm2J6UgqiwwnXiA==",
      "path": "system.threading.tasks/4.3.0",
      "hashPath": "system.threading.tasks.4.3.0.nupkg.sha512"
    },
    "TestCentric.Metadata/1.7.1": {
      "type": "package",
      "serviceable": true,
      "sha512": "sha512-QjdwsUJXJbGmFKNiTZbWeRpwhqRcEAtgb+dwR4YVK8xUBBEfXfrFV074f1DBtnrOfAIT+LnZCeVVeg/fYUlAEA==",
      "path": "testcentric.metadata/1.7.1",
      "hashPath": "testcentric.metadata.1.7.1.nupkg.sha512"
    },
    "nunit.engine.api/3.13.0": {
      "type": "project",
      "serviceable": false,
      "sha512": ""
    },
    "nunit.engine.core/3.13.0": {
      "type": "project",
      "serviceable": false,
      "sha512": ""
    }
  }
}

tools\agents\netcoreapp3.1\nunit-agent.dll

md5: 3C3EA2EEC725ABCC57F7830AC2C922B7 | sha1: 1C0EAB0AB98393F45A9ABDE32936C1A6208AB302 | sha256: 33D2AE69548A64F48E400CE243700C4DE4D3D05B3045E7567F80E16A609982C6 | sha512: DFA221857B405A5550C8D19515D9B6A860A220A6CBDF897B77073703DDB0547F0444F34CD457F284ADE3945673265F3F70D9801FD0629016268C34BFA87CED08

tools\agents\netcoreapp3.1\nunit-agent.dll.config

<?xml version="1.0" encoding="utf-8"?>
<configuration>
  <!--
   Nunit-agent only runs under .NET 2.0 or higher. 
   The setting    useLegacyV2RuntimeActivationPolicy only applies 
   under .NET 4.0 and permits use of mixed mode assemblies, 
   which would otherwise not load correctly. 
  -->
  <startup useLegacyV2RuntimeActivationPolicy="true">
    <!--
     Nunit-agent is normally run by the console or gui
     runners and not independently. In normal usage, 
     the runner specifies which runtime should be used.
     
     Do NOT add any supportedRuntime elements here, 
     since they may prevent the runner from controlling 
     the runtime that is used!
    -->
  </startup>

  <runtime>
    <!-- Ensure that test exceptions don't crash NUnit -->
    <legacyUnhandledExceptionPolicy enabled="1" />

    <!--
     Since legacyUnhandledExceptionPolicy keeps the console from being killed even though an NUnit framework
     test worker thread is killed, this is needed to prevent a hang. NUnit framework can only handle these
     exceptions when this config element is present. (Or if future versions of NUnit framework drop support
     for partial trust which would enable it to use [HandleProcessCorruptedStateExceptions].)
    -->
    <legacyCorruptedStateExceptionsPolicy enabled="true" />

    <!-- Run partial trust V2 assemblies in full trust under .NET 4.0 -->
    <loadFromRemoteSources enabled="true" />

    <!-- Enable reading source information from Portable and Embedded PDBs when running applications -->
    <!-- built against previous .NET Framework versions on .NET Framework 4.7.2 -->
    <AppContextSwitchOverrides value="Switch.System.Diagnostics.IgnorePortablePDBsInStackTraces=false" />
  </runtime>
  
</configuration>

tools\agents\netcoreapp3.1\nunit-agent.exe.ignore

tools\agents\netcoreapp3.1\nunit-agent.runtimeconfig.json

{
  "runtimeOptions": {
    "tfm": "netcoreapp3.1",
    "framework": {
      "name": "Microsoft.NETCore.App",
      "version": "3.1.0"
    },
    "configProperties": {
      "System.Reflection.Metadata.MetadataUpdater.IsSupported": false
    }
  }
}

tools\agents\netcoreapp3.1\nunit.agent.addins

tools\agents\netcoreapp3.1\nunit.engine.api.dll

md5: 5B59BA8B71A844B709EAC78D921C9501 | sha1: 7E1186A04EDF5FA886FE7F325060B597006B4172 | sha256: 12889E7A8E6D93545A15C4DC909719FB238F1A08AAF49B8244DA22E9747F7581 | sha512: D9951F8ED748EF60B4F79E53717800DF0A3C50A15B9637611EF43E98BB4476E73EB3C44E6FA3FAF7D5C11EF740AC3BF0C9ED987C9E24628ED7F5B796E8C16D12

tools\agents\netcoreapp3.1\nunit.engine.api.xml

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>nunit.engine.api</name>
    </assembly>
    <members>
        <member name="T:NUnit.Engine.NUnitEngineException">
            <summary>
            NUnitEngineException is thrown when the engine has been
            called with improper values or when a particular facility
            is not available.
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineException.#ctor(System.String)">
            <summary>
            Construct with a message
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineException.#ctor(System.String,System.Exception)">
            <summary>
            Construct with a message and inner exception
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
            <summary>
            Serialization constructor
            </summary>
        </member>
        <member name="T:NUnit.Engine.NUnitEngineNotFoundException">
            <summary>
            The exception that is thrown if a valid test engine is not found
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineNotFoundException.#ctor">
            <summary>
            Initializes a new instance of the <see cref="T:NUnit.Engine.NUnitEngineNotFoundException"/> class.
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineNotFoundException.#ctor(System.Version)">
            <summary>
            Initializes a new instance of the <see cref="T:NUnit.Engine.NUnitEngineNotFoundException"/> class.
            </summary>
            <param name="minVersion">The minimum version.</param>
        </member>
        <member name="T:NUnit.Engine.NUnitEngineUnloadException">
            <summary>
            NUnitEngineUnloadException is thrown when a test run has completed successfully
            but one or more errors were encountered when attempting to unload
            and shut down the test run cleanly.
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineUnloadException.#ctor(System.String)">
            <summary>
            Construct with a message
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineUnloadException.#ctor(System.String,System.Exception)">
            <summary>
            Construct with a message and inner exception
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineUnloadException.#ctor(System.Collections.Generic.ICollection{System.Exception})">
            <summary>
            Construct with a message and a collection of exceptions.
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineUnloadException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
            <summary>
            Serialization constructor.
            </summary>
        </member>
        <member name="P:NUnit.Engine.NUnitEngineUnloadException.AggregatedExceptions">
            <summary>
            Gets the collection of exceptions .
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.ExtensionAttribute">
            <summary>
            The ExtensionAttribute is used to identify a class that is intended
            to serve as an extension.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.ExtensionAttribute.#ctor">
            <summary>
            Initializes a new instance of the <see cref="T:NUnit.Engine.Extensibility.ExtensionAttribute"/> class.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionAttribute.Path">
            <summary>
            A unique string identifying the ExtensionPoint for which this Extension is 
            intended. This is an optional field provided NUnit is able to deduce the
            ExtensionPoint from the Type of the extension class.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionAttribute.Description">
            <summary>
            An optional description of what the extension does.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionAttribute.Enabled">
            <summary>
            Flag indicating whether the extension is enabled.
            </summary>
            <value><c>true</c> if enabled; otherwise, <c>false</c>.</value>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionAttribute.EngineVersion">
            <summary>
            The minimum Engine version for which this extension is designed
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.ExtensionPointAttribute">
            <summary>
            ExtensionPointAttribute is used at the assembly level to identify and
            document any ExtensionPoints supported by the assembly.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.ExtensionPointAttribute.#ctor(System.String,System.Type)">
            <summary>
            Construct an ExtensionPointAttribute
            </summary>
            <param name="path">A unique string identifying the extension point.</param>
            <param name="type">The required Type of any extension that is installed at this extension point.</param>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionPointAttribute.Path">
            <summary>
            The unique string identifying this ExtensionPoint. This identifier
            is typically formatted as a path using '/' and the set of extension 
            points is sometimes viewed as forming a tree.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionPointAttribute.Type">
            <summary>
            The required Type (usually an interface) of any extension that is 
            installed at this ExtensionPoint.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionPointAttribute.Description">
            <summary>
            An optional description of the purpose of the ExtensionPoint
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.ExtensionPropertyAttribute">
            <summary>
            The ExtensionPropertyAttribute is used to specify named properties for an extension.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.ExtensionPropertyAttribute.#ctor(System.String,System.String)">
            <summary>
            Construct an ExtensionPropertyAttribute
            </summary>
            <param name="name">The name of the property</param>
            <param name="value">The property value</param>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionPropertyAttribute.Name">
            <summary>
            The name of the property.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionPropertyAttribute.Value">
            <summary>
            The property value
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IDriverFactory">
            <summary>
            Interface implemented by a Type that knows how to create a driver for a test assembly.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IDriverFactory.IsSupportedTestFramework(System.Reflection.AssemblyName)">
            <summary>
            Gets a flag indicating whether a given AssemblyName
            represents a test framework supported by this factory.
            </summary>
            <param name="reference">An AssemblyName referring to the possible test framework.</param>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IDriverFactory.GetDriver(System.Reflection.AssemblyName)">
            <summary>
            Gets a driver for a given test assembly and a framework
            which the assembly is already known to reference.
            </summary>
            <param name="reference">An AssemblyName referring to the test framework.</param>
            <returns></returns>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IExtensionNode">
            <summary>
            The IExtensionNode interface is implemented by a class that represents a
            single extension being installed on a particular extension point.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.TypeName">
            <summary>
            Gets the full name of the Type of the extension object.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.Enabled">
            <summary>
            Gets a value indicating whether this <see cref="T:NUnit.Engine.Extensibility.IExtensionNode"/> is enabled.
            </summary>
            <value><c>true</c> if enabled; otherwise, <c>false</c>.</value>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.Path">
            <summary>
            Gets the unique string identifying the ExtensionPoint for which
            this Extension is intended. This identifier may be supplied by the attribute
            marking the extension or deduced by NUnit from the Type of the extension class.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.Description">
            <summary>
            Gets an optional description of what the extension does.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.TargetFramework">
            <summary>
            The TargetFramework of the extension assembly.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.PropertyNames">
            <summary>
            Gets a collection of the names of all this extension's properties
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IExtensionNode.GetValues(System.String)">
            <summary>
            Gets a collection of the values of a particular named property
            If none are present, returns an empty enumerator.
            </summary>
            <param name="name">The property name</param>
            <returns>A collection of values</returns>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.AssemblyPath">
            <summary>
            The path to the assembly implementing this extension.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.AssemblyVersion">
            <summary>
            The version of the assembly implementing this extension.
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IExtensionPoint">
            <summary>
            An ExtensionPoint represents a single point in the TestEngine
            that may be extended by user addins and extensions.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionPoint.Path">
            <summary>
            Gets the unique path identifying this extension point.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionPoint.Description">
            <summary>
            Gets the description of this extension point. May be null.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionPoint.TypeName">
            <summary>
            Gets the FullName of the Type required for any extension to be installed at this extension point.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionPoint.Extensions">
            <summary>
            Gets an enumeration of IExtensionNodes for extensions installed on this extension point.
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IFrameworkDriver">
            <summary>
            The IFrameworkDriver interface is implemented by a class that
            is able to use an external framework to explore or run tests
            under the engine.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IFrameworkDriver.ID">
            <summary>
            Gets and sets the unique identifier for this driver,
            used to ensure that test ids are unique across drivers.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IFrameworkDriver.Load(System.String,System.Collections.Generic.IDictionary{System.String,System.Object})">
            <summary>
            Loads the tests in an assembly.
            </summary>
            <returns>An Xml string representing the loaded test</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IFrameworkDriver.CountTestCases(System.String)">
            <summary>
            Count the test cases that would be executed.
            </summary>
            <param name="filter">An XML string representing the TestFilter to use in counting the tests</param>
            <returns>The number of test cases counted</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IFrameworkDriver.Run(NUnit.Engine.ITestEventListener,System.String)">
            <summary>
            Executes the tests in an assembly.
            </summary>
            <param name="listener">An ITestEventHandler that receives progress notices</param>
            <param name="filter">A XML string representing the filter that controls which tests are executed</param>
            <returns>An Xml string representing the result</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IFrameworkDriver.Explore(System.String)">
            <summary>
            Returns information about the tests in an assembly.
            </summary>
            <param name="filter">An XML string representing the filter that controls which tests are included</param>
            <returns>An Xml string representing the tests</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IFrameworkDriver.StopRun(System.Boolean)">
            <summary>
            Cancel the ongoing test run. If no  test is running, the call is ignored.
            </summary>
            <param name="force">If true, cancel any ongoing test threads, otherwise wait for them to complete.</param>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IProject">
            <summary>
            Interface for the various project types that the engine can load.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IProject.ProjectPath">
            <summary>
            Gets the path to the file storing this project, if any.
            If the project has not been saved, this is null.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IProject.ActiveConfigName">
            <summary>
            Gets the active configuration, as defined
            by the particular project.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IProject.ConfigNames">
            <summary>
            Gets a list of the configs for this project
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IProject.GetTestPackage">
            <summary>
            Gets a test package for the primary or active
            configuration within the project. The package 
            includes all the assemblies and any settings
            specified in the project format.
            </summary>
            <returns>A TestPackage</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IProject.GetTestPackage(System.String)">
            <summary>
            Gets a TestPackage for a specific configuration
            within the project. The package includes all the
            assemblies and any settings specified in the 
            project format.
            </summary>
            <param name="configName">The name of the config to use</param>
            <returns>A TestPackage for the named configuration.</returns>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IProjectLoader">
            <summary>
            The IProjectLoader interface is implemented by any class
            that knows how to load projects in a specific format.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IProjectLoader.CanLoadFrom(System.String)">
            <summary>
            Returns true if the file indicated is one that this
            loader knows how to load.
            </summary>
            <param name="path">The path of the project file</param>
            <returns>True if the loader knows how to load this file, otherwise false</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IProjectLoader.LoadFrom(System.String)">
            <summary>
            Loads a project of a known format.
            </summary>
            <param name="path">The path of the project file</param>
            <returns>An IProject interface to the loaded project or null if the project cannot be loaded</returns>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IResultWriter">
            <summary>
            Common interface for objects that process and write out test results
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IResultWriter.CheckWritability(System.String)">
            <summary>
            Checks if the output path is writable. If the output is not
            writable, this method should throw an exception.
            </summary>
            <param name="outputPath"></param>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IResultWriter.WriteResultFile(System.Xml.XmlNode,System.String)">
            <summary>
            Writes result to the specified output path.
            </summary>
            <param name="resultNode">XmlNode for the result</param>
            <param name="outputPath">Path to which it should be written</param>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IResultWriter.WriteResultFile(System.Xml.XmlNode,System.IO.TextWriter)">
            <summary>
            Writes result to a TextWriter.
            </summary>
            <param name="resultNode">XmlNode for the result</param>
            <param name="writer">TextWriter to which it should be written</param>
        </member>
        <member name="T:NUnit.Engine.Extensibility.TypeExtensionPointAttribute">
            <summary>
            TypeExtensionPointAttribute is used to bind an extension point
            to a class or interface.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.TypeExtensionPointAttribute.#ctor(System.String)">
            <summary>
            Construct a TypeExtensionPointAttribute, specifying the path.
            </summary>
            <param name="path">A unique string identifying the extension point.</param>
        </member>
        <member name="M:NUnit.Engine.Extensibility.TypeExtensionPointAttribute.#ctor">
            <summary>
            Construct an TypeExtensionPointAttribute, without specifying the path.
            The extension point will use a path constructed based on the interface
            or class to which the attribute is applied.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.TypeExtensionPointAttribute.Path">
            <summary>
            The unique string identifying this ExtensionPoint. This identifier
            is typically formatted as a path using '/' and the set of extension 
            points is sometimes viewed as forming a tree.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.TypeExtensionPointAttribute.Description">
            <summary>
            An optional description of the purpose of the ExtensionPoint
            </summary>
        </member>
        <member name="T:NUnit.Engine.IAvailableRuntimes">
            <summary>
            Interface that returns a list of available runtime frameworks.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IAvailableRuntimes.AvailableRuntimes">
            <summary>
            Gets a list of available runtime frameworks.
            </summary>
        </member>
        <member name="T:NUnit.Engine.IExtensionService">
            <summary>
            The IExtensionService interface allows a runner to manage extensions.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IExtensionService.ExtensionPoints">
            <summary>
            Gets an enumeration of all ExtensionPoints in the engine.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IExtensionService.Extensions">
            <summary>
            Gets an enumeration of all installed Extensions.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IExtensionService.GetExtensionPoint(System.String)">
            <summary>
            Get an ExtensionPoint based on its unique identifying path.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IExtensionService.GetExtensionNodes(System.String)">
            <summary>
            Get an enumeration of ExtensionNodes based on their identifying path.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IExtensionService.EnableExtension(System.String,System.Boolean)">
            <summary>
            Enable or disable an extension
            </summary>
            <param name="typeName"></param>
            <param name="enabled"></param>
        </member>
        <member name="T:NUnit.Engine.ILogger">
            <summary>
            Interface for logging within the engine
            </summary>
        </member>
        <member name="M:NUnit.Engine.ILogger.Error(System.String)">
            <summary>
            Logs the specified message at the error level.
            </summary>
            <param name="message">The message.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Error(System.String,System.Object[])">
            <summary>
            Logs the specified message at the error level.
            </summary>
            <param name="format">The message.</param>
            <param name="args">The arguments.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Warning(System.String)">
            <summary>
            Logs the specified message at the warning level.
            </summary>
            <param name="message">The message.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Warning(System.String,System.Object[])">
            <summary>
            Logs the specified message at the warning level.
            </summary>
            <param name="format">The message.</param>
            <param name="args">The arguments.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Info(System.String)">
            <summary>
            Logs the specified message at the info level.
            </summary>
            <param name="message">The message.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Info(System.String,System.Object[])">
            <summary>
            Logs the specified message at the info level.
            </summary>
            <param name="format">The message.</param>
            <param name="args">The arguments.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Debug(System.String)">
            <summary>
            Logs the specified message at the debug level.
            </summary>
            <param name="message">The message.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Debug(System.String,System.Object[])">
            <summary>
            Logs the specified message at the debug level.
            </summary>
            <param name="format">The message.</param>
            <param name="args">The arguments.</param>
        </member>
        <member name="T:NUnit.Engine.ILogging">
            <summary>
            Interface to abstract getting loggers
            </summary>
        </member>
        <member name="M:NUnit.Engine.ILogging.GetLogger(System.String)">
            <summary>
            Gets the logger.
            </summary>
            <param name="name">The name of the logger to get.</param>
            <returns></returns>
        </member>
        <member name="T:NUnit.Engine.InternalTraceLevel">
            <summary>
            InternalTraceLevel is an enumeration controlling the
            level of detailed presented in the internal log.
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Default">
            <summary>
            Use the default settings as specified by the user.
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Off">
            <summary>
            Do not display any trace messages
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Error">
            <summary>
            Display Error messages only
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Warning">
            <summary>
            Display Warning level and higher messages
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Info">
            <summary>
            Display informational and higher messages
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Debug">
            <summary>
            Display debug messages and higher - i.e. all messages
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Verbose">
            <summary>
            Display debug messages and higher - i.e. all messages
            </summary>
        </member>
        <member name="T:NUnit.Engine.IRecentFiles">
            <summary>
            The IRecentFiles interface is used to isolate the app
            from various implementations of recent files.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRecentFiles.MaxFiles">
            <summary>
            The max number of files saved
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRecentFiles.Entries">
            <summary>
            Get a list of all the file entries
            </summary>
            <returns>The most recent file list</returns>
        </member>
        <member name="M:NUnit.Engine.IRecentFiles.SetMostRecent(System.String)">
            <summary>
            Set the most recent file name, reordering
            the saved names as needed and removing the oldest
            if the max number of files would be exceeded.
            The current CLR version is used to create the entry.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IRecentFiles.Remove(System.String)">
            <summary>
            Remove a file from the list
            </summary>
            <param name="fileName">The name of the file to remove</param>
        </member>
        <member name="T:NUnit.Engine.IResultService">
            <summary>
            IResultWriterService provides result writers for a specified
            well-known format.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IResultService.Formats">
            <summary>
            Gets an array of the available formats
            </summary>
        </member>
        <member name="M:NUnit.Engine.IResultService.GetResultWriter(System.String,System.Object[])">
            <summary>
            Gets a ResultWriter for a given format and set of arguments.
            </summary>
            <param name="format">The name of the format to be used</param>
            <param name="args">A set of arguments to be used in constructing the writer or null if non arguments are needed</param>
            <returns>An IResultWriter</returns>
        </member>
        <member name="T:NUnit.Engine.IRuntimeFramework">
            <summary>
            Interface implemented by objects representing a runtime framework.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRuntimeFramework.Id">
            <summary>
            Gets the inique Id for this runtime, such as "net-4.5"
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRuntimeFramework.DisplayName">
            <summary>
            Gets the display name of the framework, such as ".NET 4.5"
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRuntimeFramework.FrameworkVersion">
            <summary>
            Gets the framework version: usually contains two components, Major
            and Minor, which match the corresponding CLR components, but not always.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRuntimeFramework.ClrVersion">
            <summary>
            Gets the Version of the CLR for this framework
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRuntimeFramework.Profile">
            <summary>
            Gets a string representing the particular profile installed,
            or null if there is no profile. Currently. the only defined 
            values are Full and Client.
            </summary>
        </member>
        <member name="T:NUnit.Engine.IRuntimeFrameworkService">
            <summary>
            Implemented by a type that provides information about the
            current and other available runtimes.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IRuntimeFrameworkService.IsAvailable(System.String)">
            <summary>
            Returns true if the runtime framework represented by
            the string passed as an argument is available.
            </summary>
            <param name="framework">A string representing a framework, like 'net-4.0'</param>
            <returns>True if the framework is available, false if unavailable or nonexistent</returns>
        </member>
        <member name="M:NUnit.Engine.IRuntimeFrameworkService.SelectRuntimeFramework(NUnit.Engine.TestPackage)">
             <summary>
             Selects a target runtime framework for a TestPackage based on
             the settings in the package and the assemblies themselves.
             The package RuntimeFramework setting may be updated as a 
             result and the selected runtime is returned.
            
             Note that if a package has subpackages, the subpackages may run on a different
             framework to the top-level package. In future, this method should
             probably not return a simple string, and instead require runners
             to inspect the test package structure, to find all desired frameworks.
             </summary>
             <param name="package">A TestPackage</param>
             <returns>The selected RuntimeFramework</returns>
        </member>
        <member name="T:NUnit.Engine.ServiceStatus">
            <summary>
            Enumeration representing the status of a service
            </summary>
        </member>
        <member name="F:NUnit.Engine.ServiceStatus.Stopped">
            <summary>Service was never started or has been stopped</summary>
        </member>
        <member name="F:NUnit.Engine.ServiceStatus.Started">
            <summary>Started successfully</summary>
        </member>
        <member name="F:NUnit.Engine.ServiceStatus.Error">
            <summary>Service failed to start and is unavailable</summary>
        </member>
        <member name="T:NUnit.Engine.IService">
            <summary>
            The IService interface is implemented by all Services. Although it
            is extensible, it does not reside in the Extensibility namespace
            because it is so widely used by the engine.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IService.ServiceContext">
            <summary>
            The ServiceContext
            </summary>
        </member>
        <member name="P:NUnit.Engine.IService.Status">
            <summary>
            Gets the ServiceStatus of this service
            </summary>
        </member>
        <member name="M:NUnit.Engine.IService.StartService">
            <summary>
            Initialize the Service
            </summary>
        </member>
        <member name="M:NUnit.Engine.IService.StopService">
            <summary>
            Do any cleanup needed before terminating the service
            </summary>
        </member>
        <member name="T:NUnit.Engine.IServiceLocator">
            <summary>
            IServiceLocator allows clients to locate any NUnit services
            for which the interface is referenced. In normal use, this
            linits it to those services using interfaces defined in the 
            nunit.engine.api assembly.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IServiceLocator.GetService``1">
            <summary>
            Return a specified type of service
            </summary>
        </member>
        <member name="M:NUnit.Engine.IServiceLocator.GetService(System.Type)">
            <summary>
            Return a specified type of service
            </summary>
        </member>
        <member name="T:NUnit.Engine.SettingsEventHandler">
            <summary>
            Event handler for settings changes
            </summary>
            <param name="sender">The sender.</param>
            <param name="args">The <see cref="T:NUnit.Engine.SettingsEventArgs"/> instance containing the event data.</param>
        </member>
        <member name="T:NUnit.Engine.SettingsEventArgs">
            <summary>
            Event argument for settings changes
            </summary>
        </member>
        <member name="M:NUnit.Engine.SettingsEventArgs.#ctor(System.String)">
            <summary>
            Initializes a new instance of the <see cref="T:NUnit.Engine.SettingsEventArgs"/> class.
            </summary>
            <param name="settingName">Name of the setting that has changed.</param>
        </member>
        <member name="P:NUnit.Engine.SettingsEventArgs.SettingName">
            <summary>
            Gets the name of the setting that has changed
            </summary>
        </member>
        <member name="T:NUnit.Engine.ISettings">
            <summary>
            The ISettings interface is used to access all user
            settings and options.
            </summary>
        </member>
        <member name="E:NUnit.Engine.ISettings.Changed">
            <summary>
            Occurs when the settings are changed.
            </summary>
        </member>
        <member name="M:NUnit.Engine.ISettings.GetSetting(System.String)">
            <summary>
            Load a setting from the storage.
            </summary>
            <param name="settingName">Name of the setting to load</param>
            <returns>Value of the setting or null</returns>
        </member>
        <member name="M:NUnit.Engine.ISettings.GetSetting``1(System.String,``0)">
            <summary>
            Load a setting from the storage or return a default value
            </summary>
            <param name="settingName">Name of the setting to load</param>
            <param name="defaultValue">Value to return if the setting is missing</param>
            <returns>Value of the setting or the default value</returns>
        </member>
        <member name="M:NUnit.Engine.ISettings.RemoveSetting(System.String)">
            <summary>
            Remove a setting from the storage
            </summary>
            <param name="settingName">Name of the setting to remove</param>
        </member>
        <member name="M:NUnit.Engine.ISettings.RemoveGroup(System.String)">
            <summary>
            Remove an entire group of settings from the storage
            </summary>
            <param name="groupName">Name of the group to remove</param>
        </member>
        <member name="M:NUnit.Engine.ISettings.SaveSetting(System.String,System.Object)">
            <summary>
            Save a setting in the storage
            </summary>
            <param name="settingName">Name of the setting to save</param>
            <param name="settingValue">Value to be saved</param>
        </member>
        <member name="T:NUnit.Engine.ITestEngine">
            <summary>
            ITestEngine represents an instance of the test engine.
            Clients wanting to discover, explore or run tests start
            require an instance of the engine, which is generally
            acquired from the TestEngineActivator class.
            </summary>
        </member>
        <member name="P:NUnit.Engine.ITestEngine.Services">
            <summary>
            Gets the IServiceLocator interface, which gives access to
            certain services provided by the engine.
            </summary>
        </member>
        <member name="P:NUnit.Engine.ITestEngine.WorkDirectory">
            <summary>
            Gets and sets the directory path used by the engine for saving files.
            Some services may ignore changes to this path made after initialization.
            The default value is the current directory.
            </summary>
        </member>
        <member name="P:NUnit.Engine.ITestEngine.InternalTraceLevel">
            <summary>
            Gets and sets the InternalTraceLevel used by the engine. Changing this
            setting after initialization will have no effect. The default value
            is the value saved in the NUnit settings.
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestEngine.Initialize">
             <summary>
             Initialize the engine. This includes initializing mono addins,
             setting the trace level and creating the standard set of services
             used in the Engine.
            
             This interface is not normally called by user code. Programs linking
             only to the nunit.engine.api assembly are given a
             pre-initialized instance of TestEngine. Programs
             that link directly to nunit.engine usually do so
             in order to perform custom initialization.
             </summary>
        </member>
        <member name="M:NUnit.Engine.ITestEngine.GetRunner(NUnit.Engine.TestPackage)">
            <summary>
            Returns a test runner instance for use by clients in discovering,
            exploring and executing tests.
            </summary>
            <param name="package">The TestPackage for which the runner is intended.</param>
            <returns>An ITestRunner.</returns>
        </member>
        <member name="T:NUnit.Engine.ITestEventListener">
            <summary>
            The ITestListener interface is used to receive notices of significant
            events while a test is running. Its single method accepts an Xml string,
            which may represent any event generated by the test framework, the driver
            or any of the runners internal to the engine. Use of Xml means that
            any driver and framework may add additional events and the engine will
            simply pass them on through this interface.
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestEventListener.OnTestEvent(System.String)">
            <summary>
            Handle a progress report or other event.
            </summary>
            <param name="report">An XML progress report.</param>
        </member>
        <member name="T:NUnit.Engine.ITestFilterBuilder">
            <summary>
            Interface to a TestFilterBuilder, which is used to create TestFilters
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestFilterBuilder.AddTest(System.String)">
            <summary>
            Add a test to be selected
            </summary>
            <param name="fullName">The full name of the test, as created by NUnit</param>
        </member>
        <member name="M:NUnit.Engine.ITestFilterBuilder.SelectWhere(System.String)">
            <summary>
            Specify what is to be included by the filter using a where clause.
            </summary>
            <param name="whereClause">A where clause that will be parsed by NUnit to create the filter.</param>
        </member>
        <member name="M:NUnit.Engine.ITestFilterBuilder.GetFilter">
            <summary>
            Get a TestFilter constructed according to the criteria specified by the other calls.
            </summary>
            <returns>A TestFilter.</returns>
        </member>
        <member name="T:NUnit.Engine.ITestFilterService">
            <summary>
            The TestFilterService provides builders that can create TestFilters
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestFilterService.GetTestFilterBuilder">
            <summary>
            Get an uninitialized TestFilterBuilder
            </summary>
        </member>
        <member name="T:NUnit.Engine.ITestRun">
            <summary>
            The ITestRun class represents an ongoing test run.
            </summary>
        </member>
        <member name="P:NUnit.Engine.ITestRun.Result">
            <summary>
            Get the result of the test.
            </summary>
            <returns>An XmlNode representing the test run result</returns>
        </member>
        <member name="M:NUnit.Engine.ITestRun.Wait(System.Int32)">
            <summary>
            Blocks the current thread until the current test run completes
            or the timeout is reached
            </summary>
            <param name="timeout">A <see cref="T:System.Int32"/> that represents the number of milliseconds to wait or -1 milliseconds to wait indefinitely. </param>
            <returns>True if the run completed</returns>
        </member>
        <member name="T:NUnit.Engine.ITestRunner">
            <summary>
            Interface implemented by all test runners.
            </summary>
        </member>
        <member name="P:NUnit.Engine.ITestRunner.IsTestRunning">
            <summary>
            Get a flag indicating whether a test is running
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.Load">
            <summary>
            Load a TestPackage for possible execution
            </summary>
            <returns>An XmlNode representing the loaded package.</returns>
            <remarks>
            This method is normally optional, since Explore and Run call
            it automatically when necessary. The method is kept in order
            to make it easier to convert older programs that use it.
            </remarks>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.Unload">
            <summary>
            Unload any loaded TestPackage. If none is loaded,
            the call is ignored.
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.Reload">
            <summary>
            Reload the current TestPackage
            </summary>
            <returns>An XmlNode representing the loaded package.</returns>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.CountTestCases(NUnit.Engine.TestFilter)">
            <summary>
            Count the test cases that would be run under
            the specified filter.
            </summary>
            <param name="filter">A TestFilter</param>
            <returns>The count of test cases</returns>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.Run(NUnit.Engine.ITestEventListener,NUnit.Engine.TestFilter)">
            <summary>
            Run the tests in the loaded TestPackage and return a test result. The tests
            are run synchronously and the listener interface is notified as it progresses.
            </summary>
            <param name="listener">The listener that is notified as the run progresses</param>
            <param name="filter">A TestFilter used to select tests</param>
            <returns>An XmlNode giving the result of the test execution</returns>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.RunAsync(NUnit.Engine.ITestEventListener,NUnit.Engine.TestFilter)">
            <summary>
            Start a run of the tests in the loaded TestPackage. The tests are run
            asynchronously and the listener interface is notified as it progresses.
            </summary>
            <param name="listener">The listener that is notified as the run progresses</param>
            <param name="filter">A TestFilter used to select tests</param>
            <returns></returns>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.StopRun(System.Boolean)">
            <summary>
            Cancel the ongoing test run. If no  test is running, the call is ignored.
            </summary>
            <param name="force">If true, cancel any ongoing test threads, otherwise wait for them to complete.</param>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.Explore(NUnit.Engine.TestFilter)">
            <summary>
            Explore a loaded TestPackage and return information about the tests found.
            </summary>
            <param name="filter">The TestFilter to be used in selecting tests to explore.</param>
            <returns>An XmlNode representing the tests found.</returns>
        </member>
        <member name="T:NUnit.Engine.TestEngineActivator">
            <summary>
            TestEngineActivator creates an instance of the test engine and returns an ITestEngine interface.
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestEngineActivator.CreateInstance">
            <summary>
            Create an instance of the test engine.
            </summary>
            <returns>An <see cref="T:NUnit.Engine.ITestEngine"/></returns>
        </member>
        <member name="T:NUnit.Engine.TestFilter">
            <summary>
            Abstract base for all test filters. A filter is represented
            by an XmlNode with &lt;filter&gt; as its topmost element.
            In the console runner, filters serve only to carry this
            XML representation, as all filtering is done by the engine.
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestFilter.#ctor(System.String)">
            <summary>
            Initializes a new instance of the <see cref="T:NUnit.Engine.TestFilter"/> class.
            </summary>
            <param name="xmlText">The XML text that specifies the filter.</param>
        </member>
        <member name="F:NUnit.Engine.TestFilter.Empty">
            <summary>
            The empty filter - one that always passes.
            </summary>
        </member>
        <member name="P:NUnit.Engine.TestFilter.Text">
            <summary>
            Gets the XML representation of this filter as a string.
            </summary>
        </member>
        <member name="T:NUnit.Engine.TestPackage">
            <summary>
            TestPackage holds information about a set of test files to
            be loaded by a TestRunner. Each TestPackage represents
            tests for one or more test files. TestPackages may be named
            or anonymous, depending on the constructor used.
            
            Upon construction, a package is given an ID (string), which
            remains unchanged for the lifetime of the TestPackage instance.
            The package ID is passed to the test framework for use in generating
            test IDs.
            
            A runner that reloads test assemblies and wants the ids to remain stable
            should avoid creating a new package but should instead use the original
            package, changing settings as needed. This gives the best chance for the
            tests in the reloaded assembly to match those originally loaded.
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestPackage.#ctor(System.String)">
            <summary>
            Construct a named TestPackage, specifying a file path for
            the assembly or project to be used.
            </summary>
            <param name="filePath">The file path.</param>
        </member>
        <member name="M:NUnit.Engine.TestPackage.#ctor(System.Collections.Generic.IList{System.String})">
            <summary>
            Construct an anonymous TestPackage that wraps test files.
            </summary>
            <param name="testFiles"></param>
        </member>
        <member name="P:NUnit.Engine.TestPackage.ID">
            <summary>
            Every test package gets a unique ID used to prefix test IDs within that package.
            </summary>
            <remarks>
            The generated ID is only unique for packages created within the same application domain.
            For that reason, NUnit pre-creates all test packages that will be needed.
            </remarks>
        </member>
        <member name="P:NUnit.Engine.TestPackage.Name">
            <summary>
            Gets the name of the package
            </summary>
        </member>
        <member name="P:NUnit.Engine.TestPackage.FullName">
            <summary>
            Gets the path to the file containing tests. It may be
            an assembly or a recognized project type.
            </summary>
        </member>
        <member name="P:NUnit.Engine.TestPackage.SubPackages">
            <summary>
            Gets the list of SubPackages contained in this package
            </summary>
        </member>
        <member name="P:NUnit.Engine.TestPackage.Settings">
            <summary>
            Gets the settings dictionary for this package.
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestPackage.AddSubPackage(NUnit.Engine.TestPackage)">
            <summary>
            Add a subproject to the package.
            </summary>
            <param name="subPackage">The subpackage to be added</param>
        </member>
        <member name="M:NUnit.Engine.TestPackage.AddSetting(System.String,System.Object)">
            <summary>
            Add a setting to a package and all of its subpackages.
            </summary>
            <param name="name">The name of the setting</param>
            <param name="value">The value of the setting</param>
            <remarks>
            Once a package is created, subpackages may have been created
            as well. If you add a setting directly to the Settings dictionary
            of the package, the subpackages are not updated. This method is
            used when the settings are intended to be reflected to all the
            subpackages under the package.
            </remarks>
        </member>
        <member name="M:NUnit.Engine.TestPackage.GetSetting``1(System.String,``0)">
            <summary>
            Return the value of a setting or a default.
            </summary>
            <param name="name">The name of the setting</param>
            <param name="defaultSetting">The default value</param>
            <returns></returns>
        </member>
        <member name="T:NUnit.Engine.TestSelectionParserException">
            <summary>
            TestSelectionParserException is thrown when an error
            is found while parsing the selection expression.
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestSelectionParserException.#ctor(System.String)">
            <summary>
            Construct with a message
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestSelectionParserException.#ctor(System.String,System.Exception)">
            <summary>
            Construct with a message and inner exception
            </summary>
            <param name="message"></param>
            <param name="innerException"></param>
        </member>
        <member name="M:NUnit.Engine.TestSelectionParserException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
            <summary>
            Serialization constructor
            </summary>
        </member>
    </members>
</doc>

tools\agents\netcoreapp3.1\nunit.engine.core.dll

md5: 1384461958074879C39551D6DB5A7FAD | sha1: 2253529B2D36556DC1074D1FDA730294F41ECB95 | sha256: DBE0CCAF24F7AA095802F5F85C8E7439DFCD32894A7A330A5CECB31CDC42552C | sha512: 3D4540CC75956285E63A07CCBE1D1D12743EC5CAD69A82B5E7B8D3BD76F77BC7A2A6FF548808940A7F8E9DAC14DEB419BE2BFC3C22953FB19DA1FE9F3930959F

tools\agents\netcoreapp3.1\testcentric.engine.metadata.dll

md5: 0840A47D2A6E084B91BE187E648A533A | sha1: 6532647038F6EF4B9725D3F0CE49162754ACB285 | sha256: 69E4533EE53BFCEE5305EE16C1FE485C4D4D8525AC3D367D9E04D5B4BAA4A6C6 | sha512: 8B5C99F4C14D6FEF6DD57CDC5BC272D4028D2A0E9CAB4819245ADB1C9305F7B96A4BFED01FE239E9C223EF987984165FA3926BA5A7F3290E07ED9350335AF45E

tools\nunit3-console.exe.config

<?xml version="1.0" encoding="utf-8"?>
<configuration>
  <!--
   The console runner runs under .NET 2.0 or higher. 
   The setting useLegacyV2RuntimeActivationPolicy only applies 
   under .NET 4.0 and permits use of mixed mode assemblies, 
   which would otherwise not load correctly.
  -->
  <startup useLegacyV2RuntimeActivationPolicy="true">
    <supportedRuntime version="v4.0.30319" />
    <supportedRuntime version="v2.0.50727" />
  </startup>
  <runtime>
    <!-- Ensure that test exceptions don't crash NUnit -->
    <legacyUnhandledExceptionPolicy enabled="1" />
    <!--
     Since legacyUnhandledExceptionPolicy keeps the console from being killed even though an NUnit framework
     test worker thread is killed, this is needed to prevent a hang. NUnit framework can only handle these
     exceptions when this config element is present. (Or if future versions of NUnit framework drop support
     for partial trust which would enable it to use [HandleProcessCorruptedStateExceptions].)
    -->
    <legacyCorruptedStateExceptionsPolicy enabled="true" />
    <!-- Run partial trust V2 assemblies in full trust under .NET 4.0 -->
    <loadFromRemoteSources enabled="true" />
    <!-- Enable reading source information from Portable and Embedded PDBs when running applications -->
    <!-- built against previous .NET Framework versions on .NET Framework 4.7.2 -->
    <AppContextSwitchOverrides value="Switch.System.Diagnostics.IgnorePortablePDBsInStackTraces=false" />
  </runtime>
</configuration>

tools\testcentric.engine.metadata.dll

md5: 28FCEF2FE7F3D3430A5BEEB5A0E998A9 | sha1: 228D3569AA37BC5A60A50404E3D7371A870AC453 | sha256: 9B6975C9821F1BD152DE573516847CF0D7BFDE33A7DAE52553E8149A0CD490E4 | sha512: F1CB9E669C07187FD0AC0CE9556A05106164258633B610A0B76F57E7F2A98EC9A5BDB7DD0188714E3D5FA647AB7B7368BA1F1665D00994CA431F552DEB1956CE

tools\VERIFICATION.txt

VERIFICATION
Verification is intended to assist the Chocolatey moderators and community
in verifying that this package's contents are trustworthy.

This package is published by the NUnit Project itself. Any binaries will be 
identical to other package types published by the project, in particular
the NUnit.ConsoleRunner and NUnit.Console NuGet packages.

tools\nunit3-console.exe

md5: 51B13D8FFDDF5027127FBE08E5ECBB5C | sha1: CD67B7704BADD7D4CFD54E83489E9F8963151EDF | sha256: B0DBBDAC75BE2E65EE90C52777E8C2038685F9BE1BC384D79487BAE6494384D7 | sha512: 7D74E7128D9012BD91C6D4AFCA79B394956418EC3159EE197865B592C55B8A3039896E758BBEC94E412AD0E34A1A43D8ABFEBED1AAD0FC642A00F0A06FF80631

tools\nunit.engine.dll

md5: A642B9CA25972885A57CDA16EB58A7E0 | sha1: F630D60F9E46A8DEF188B34D4502565CA998C4CF | sha256: C485EEF448EA3791DD912BF0E5EB54D1FB9D3887335E8576B57CCF87D9CA9A69 | sha512: 15A60C735A6410BA450418D33BA1143D4DE3746AFEACDA376B949AC99AD0B87451115D342543EC2CB8C87E9E220ABD9EE2F05A44C186782E0DA5CF5BF50F45EB

tools\nunit.engine.core.dll

md5: 99C624656F449CD5323742EDF96D35C0 | sha1: AEC20F89B90C483A151145221C8DB2D7F62B18CC | sha256: 5C34D84C1BE82DD5C824FD3D9AAF046B48C74FBAA066819B818A21553AEA8C60 | sha512: 6167C163FF240B9234700D626F34B9A1E7E9E271D888E0B39F72EDF2893563041913675E5439E85F8378347B8188A9ABCC2FAF6D737647B61E56C6CFD4F03857

tools\nunit.engine.api.xml

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>nunit.engine.api</name>
    </assembly>
    <members>
        <member name="T:NUnit.Engine.NUnitEngineException">
            <summary>
            NUnitEngineException is thrown when the engine has been
            called with improper values or when a particular facility
            is not available.
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineException.#ctor(System.String)">
            <summary>
            Construct with a message
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineException.#ctor(System.String,System.Exception)">
            <summary>
            Construct with a message and inner exception
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
            <summary>
            Serialization constructor
            </summary>
        </member>
        <member name="T:NUnit.Engine.NUnitEngineNotFoundException">
            <summary>
            The exception that is thrown if a valid test engine is not found
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineNotFoundException.#ctor">
            <summary>
            Initializes a new instance of the <see cref="T:NUnit.Engine.NUnitEngineNotFoundException"/> class.
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineNotFoundException.#ctor(System.Version)">
            <summary>
            Initializes a new instance of the <see cref="T:NUnit.Engine.NUnitEngineNotFoundException"/> class.
            </summary>
            <param name="minVersion">The minimum version.</param>
        </member>
        <member name="T:NUnit.Engine.NUnitEngineUnloadException">
            <summary>
            NUnitEngineUnloadException is thrown when a test run has completed successfully
            but one or more errors were encountered when attempting to unload
            and shut down the test run cleanly.
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineUnloadException.#ctor(System.String)">
            <summary>
            Construct with a message
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineUnloadException.#ctor(System.String,System.Exception)">
            <summary>
            Construct with a message and inner exception
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineUnloadException.#ctor(System.Collections.Generic.ICollection{System.Exception})">
            <summary>
            Construct with a message and a collection of exceptions.
            </summary>
        </member>
        <member name="M:NUnit.Engine.NUnitEngineUnloadException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
            <summary>
            Serialization constructor.
            </summary>
        </member>
        <member name="P:NUnit.Engine.NUnitEngineUnloadException.AggregatedExceptions">
            <summary>
            Gets the collection of exceptions .
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.ExtensionAttribute">
            <summary>
            The ExtensionAttribute is used to identify a class that is intended
            to serve as an extension.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.ExtensionAttribute.#ctor">
            <summary>
            Initializes a new instance of the <see cref="T:NUnit.Engine.Extensibility.ExtensionAttribute"/> class.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionAttribute.Path">
            <summary>
            A unique string identifying the ExtensionPoint for which this Extension is 
            intended. This is an optional field provided NUnit is able to deduce the
            ExtensionPoint from the Type of the extension class.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionAttribute.Description">
            <summary>
            An optional description of what the extension does.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionAttribute.Enabled">
            <summary>
            Flag indicating whether the extension is enabled.
            </summary>
            <value><c>true</c> if enabled; otherwise, <c>false</c>.</value>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionAttribute.EngineVersion">
            <summary>
            The minimum Engine version for which this extension is designed
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.ExtensionPointAttribute">
            <summary>
            ExtensionPointAttribute is used at the assembly level to identify and
            document any ExtensionPoints supported by the assembly.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.ExtensionPointAttribute.#ctor(System.String,System.Type)">
            <summary>
            Construct an ExtensionPointAttribute
            </summary>
            <param name="path">A unique string identifying the extension point.</param>
            <param name="type">The required Type of any extension that is installed at this extension point.</param>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionPointAttribute.Path">
            <summary>
            The unique string identifying this ExtensionPoint. This identifier
            is typically formatted as a path using '/' and the set of extension 
            points is sometimes viewed as forming a tree.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionPointAttribute.Type">
            <summary>
            The required Type (usually an interface) of any extension that is 
            installed at this ExtensionPoint.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionPointAttribute.Description">
            <summary>
            An optional description of the purpose of the ExtensionPoint
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.ExtensionPropertyAttribute">
            <summary>
            The ExtensionPropertyAttribute is used to specify named properties for an extension.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.ExtensionPropertyAttribute.#ctor(System.String,System.String)">
            <summary>
            Construct an ExtensionPropertyAttribute
            </summary>
            <param name="name">The name of the property</param>
            <param name="value">The property value</param>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionPropertyAttribute.Name">
            <summary>
            The name of the property.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.ExtensionPropertyAttribute.Value">
            <summary>
            The property value
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IDriverFactory">
            <summary>
            Interface implemented by a Type that knows how to create a driver for a test assembly.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IDriverFactory.IsSupportedTestFramework(System.Reflection.AssemblyName)">
            <summary>
            Gets a flag indicating whether a given AssemblyName
            represents a test framework supported by this factory.
            </summary>
            <param name="reference">An AssemblyName referring to the possible test framework.</param>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IDriverFactory.GetDriver(System.AppDomain,System.Reflection.AssemblyName)">
            <summary>
            Gets a driver for a given test assembly and a framework
            which the assembly is already known to reference.
            </summary>
            <param name="domain">The domain in which the assembly will be loaded</param>
            <param name="reference">An AssemblyName referring to the test framework.</param>
            <returns></returns>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IExtensionNode">
            <summary>
            The IExtensionNode interface is implemented by a class that represents a
            single extension being installed on a particular extension point.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.TypeName">
            <summary>
            Gets the full name of the Type of the extension object.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.Enabled">
            <summary>
            Gets a value indicating whether this <see cref="T:NUnit.Engine.Extensibility.IExtensionNode"/> is enabled.
            </summary>
            <value><c>true</c> if enabled; otherwise, <c>false</c>.</value>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.Path">
            <summary>
            Gets the unique string identifying the ExtensionPoint for which
            this Extension is intended. This identifier may be supplied by the attribute
            marking the extension or deduced by NUnit from the Type of the extension class.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.Description">
            <summary>
            Gets an optional description of what the extension does.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.TargetFramework">
            <summary>
            The TargetFramework of the extension assembly.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.PropertyNames">
            <summary>
            Gets a collection of the names of all this extension's properties
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IExtensionNode.GetValues(System.String)">
            <summary>
            Gets a collection of the values of a particular named property
            If none are present, returns an empty enumerator.
            </summary>
            <param name="name">The property name</param>
            <returns>A collection of values</returns>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.AssemblyPath">
            <summary>
            The path to the assembly implementing this extension.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionNode.AssemblyVersion">
            <summary>
            The version of the assembly implementing this extension.
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IExtensionPoint">
            <summary>
            An ExtensionPoint represents a single point in the TestEngine
            that may be extended by user addins and extensions.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionPoint.Path">
            <summary>
            Gets the unique path identifying this extension point.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionPoint.Description">
            <summary>
            Gets the description of this extension point. May be null.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionPoint.TypeName">
            <summary>
            Gets the FullName of the Type required for any extension to be installed at this extension point.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IExtensionPoint.Extensions">
            <summary>
            Gets an enumeration of IExtensionNodes for extensions installed on this extension point.
            </summary>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IFrameworkDriver">
            <summary>
            The IFrameworkDriver interface is implemented by a class that
            is able to use an external framework to explore or run tests
            under the engine.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IFrameworkDriver.ID">
            <summary>
            Gets and sets the unique identifier for this driver,
            used to ensure that test ids are unique across drivers.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IFrameworkDriver.Load(System.String,System.Collections.Generic.IDictionary{System.String,System.Object})">
            <summary>
            Loads the tests in an assembly.
            </summary>
            <returns>An Xml string representing the loaded test</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IFrameworkDriver.CountTestCases(System.String)">
            <summary>
            Count the test cases that would be executed.
            </summary>
            <param name="filter">An XML string representing the TestFilter to use in counting the tests</param>
            <returns>The number of test cases counted</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IFrameworkDriver.Run(NUnit.Engine.ITestEventListener,System.String)">
            <summary>
            Executes the tests in an assembly.
            </summary>
            <param name="listener">An ITestEventHandler that receives progress notices</param>
            <param name="filter">A XML string representing the filter that controls which tests are executed</param>
            <returns>An Xml string representing the result</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IFrameworkDriver.Explore(System.String)">
            <summary>
            Returns information about the tests in an assembly.
            </summary>
            <param name="filter">An XML string representing the filter that controls which tests are included</param>
            <returns>An Xml string representing the tests</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IFrameworkDriver.StopRun(System.Boolean)">
            <summary>
            Cancel the ongoing test run. If no  test is running, the call is ignored.
            </summary>
            <param name="force">If true, cancel any ongoing test threads, otherwise wait for them to complete.</param>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IProject">
            <summary>
            Interface for the various project types that the engine can load.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IProject.ProjectPath">
            <summary>
            Gets the path to the file storing this project, if any.
            If the project has not been saved, this is null.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IProject.ActiveConfigName">
            <summary>
            Gets the active configuration, as defined
            by the particular project.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.IProject.ConfigNames">
            <summary>
            Gets a list of the configs for this project
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IProject.GetTestPackage">
            <summary>
            Gets a test package for the primary or active
            configuration within the project. The package 
            includes all the assemblies and any settings
            specified in the project format.
            </summary>
            <returns>A TestPackage</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IProject.GetTestPackage(System.String)">
            <summary>
            Gets a TestPackage for a specific configuration
            within the project. The package includes all the
            assemblies and any settings specified in the 
            project format.
            </summary>
            <param name="configName">The name of the config to use</param>
            <returns>A TestPackage for the named configuration.</returns>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IProjectLoader">
            <summary>
            The IProjectLoader interface is implemented by any class
            that knows how to load projects in a specific format.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IProjectLoader.CanLoadFrom(System.String)">
            <summary>
            Returns true if the file indicated is one that this
            loader knows how to load.
            </summary>
            <param name="path">The path of the project file</param>
            <returns>True if the loader knows how to load this file, otherwise false</returns>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IProjectLoader.LoadFrom(System.String)">
            <summary>
            Loads a project of a known format.
            </summary>
            <param name="path">The path of the project file</param>
            <returns>An IProject interface to the loaded project or null if the project cannot be loaded</returns>
        </member>
        <member name="T:NUnit.Engine.Extensibility.IResultWriter">
            <summary>
            Common interface for objects that process and write out test results
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IResultWriter.CheckWritability(System.String)">
            <summary>
            Checks if the output path is writable. If the output is not
            writable, this method should throw an exception.
            </summary>
            <param name="outputPath"></param>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IResultWriter.WriteResultFile(System.Xml.XmlNode,System.String)">
            <summary>
            Writes result to the specified output path.
            </summary>
            <param name="resultNode">XmlNode for the result</param>
            <param name="outputPath">Path to which it should be written</param>
        </member>
        <member name="M:NUnit.Engine.Extensibility.IResultWriter.WriteResultFile(System.Xml.XmlNode,System.IO.TextWriter)">
            <summary>
            Writes result to a TextWriter.
            </summary>
            <param name="resultNode">XmlNode for the result</param>
            <param name="writer">TextWriter to which it should be written</param>
        </member>
        <member name="T:NUnit.Engine.Extensibility.TypeExtensionPointAttribute">
            <summary>
            TypeExtensionPointAttribute is used to bind an extension point
            to a class or interface.
            </summary>
        </member>
        <member name="M:NUnit.Engine.Extensibility.TypeExtensionPointAttribute.#ctor(System.String)">
            <summary>
            Construct a TypeExtensionPointAttribute, specifying the path.
            </summary>
            <param name="path">A unique string identifying the extension point.</param>
        </member>
        <member name="M:NUnit.Engine.Extensibility.TypeExtensionPointAttribute.#ctor">
            <summary>
            Construct an TypeExtensionPointAttribute, without specifying the path.
            The extension point will use a path constructed based on the interface
            or class to which the attribute is applied.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.TypeExtensionPointAttribute.Path">
            <summary>
            The unique string identifying this ExtensionPoint. This identifier
            is typically formatted as a path using '/' and the set of extension 
            points is sometimes viewed as forming a tree.
            </summary>
        </member>
        <member name="P:NUnit.Engine.Extensibility.TypeExtensionPointAttribute.Description">
            <summary>
            An optional description of the purpose of the ExtensionPoint
            </summary>
        </member>
        <member name="T:NUnit.Engine.IAvailableRuntimes">
            <summary>
            Interface that returns a list of available runtime frameworks.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IAvailableRuntimes.AvailableRuntimes">
            <summary>
            Gets a list of available runtime frameworks.
            </summary>
        </member>
        <member name="T:NUnit.Engine.IExtensionService">
            <summary>
            The IExtensionService interface allows a runner to manage extensions.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IExtensionService.ExtensionPoints">
            <summary>
            Gets an enumeration of all ExtensionPoints in the engine.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IExtensionService.Extensions">
            <summary>
            Gets an enumeration of all installed Extensions.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IExtensionService.GetExtensionPoint(System.String)">
            <summary>
            Get an ExtensionPoint based on its unique identifying path.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IExtensionService.GetExtensionNodes(System.String)">
            <summary>
            Get an enumeration of ExtensionNodes based on their identifying path.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IExtensionService.EnableExtension(System.String,System.Boolean)">
            <summary>
            Enable or disable an extension
            </summary>
            <param name="typeName"></param>
            <param name="enabled"></param>
        </member>
        <member name="T:NUnit.Engine.ILogger">
            <summary>
            Interface for logging within the engine
            </summary>
        </member>
        <member name="M:NUnit.Engine.ILogger.Error(System.String)">
            <summary>
            Logs the specified message at the error level.
            </summary>
            <param name="message">The message.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Error(System.String,System.Object[])">
            <summary>
            Logs the specified message at the error level.
            </summary>
            <param name="format">The message.</param>
            <param name="args">The arguments.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Warning(System.String)">
            <summary>
            Logs the specified message at the warning level.
            </summary>
            <param name="message">The message.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Warning(System.String,System.Object[])">
            <summary>
            Logs the specified message at the warning level.
            </summary>
            <param name="format">The message.</param>
            <param name="args">The arguments.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Info(System.String)">
            <summary>
            Logs the specified message at the info level.
            </summary>
            <param name="message">The message.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Info(System.String,System.Object[])">
            <summary>
            Logs the specified message at the info level.
            </summary>
            <param name="format">The message.</param>
            <param name="args">The arguments.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Debug(System.String)">
            <summary>
            Logs the specified message at the debug level.
            </summary>
            <param name="message">The message.</param>
        </member>
        <member name="M:NUnit.Engine.ILogger.Debug(System.String,System.Object[])">
            <summary>
            Logs the specified message at the debug level.
            </summary>
            <param name="format">The message.</param>
            <param name="args">The arguments.</param>
        </member>
        <member name="T:NUnit.Engine.ILogging">
            <summary>
            Interface to abstract getting loggers
            </summary>
        </member>
        <member name="M:NUnit.Engine.ILogging.GetLogger(System.String)">
            <summary>
            Gets the logger.
            </summary>
            <param name="name">The name of the logger to get.</param>
            <returns></returns>
        </member>
        <member name="T:NUnit.Engine.InternalTraceLevel">
            <summary>
            InternalTraceLevel is an enumeration controlling the
            level of detailed presented in the internal log.
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Default">
            <summary>
            Use the default settings as specified by the user.
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Off">
            <summary>
            Do not display any trace messages
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Error">
            <summary>
            Display Error messages only
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Warning">
            <summary>
            Display Warning level and higher messages
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Info">
            <summary>
            Display informational and higher messages
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Debug">
            <summary>
            Display debug messages and higher - i.e. all messages
            </summary>
        </member>
        <member name="F:NUnit.Engine.InternalTraceLevel.Verbose">
            <summary>
            Display debug messages and higher - i.e. all messages
            </summary>
        </member>
        <member name="T:NUnit.Engine.IRecentFiles">
            <summary>
            The IRecentFiles interface is used to isolate the app
            from various implementations of recent files.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRecentFiles.MaxFiles">
            <summary>
            The max number of files saved
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRecentFiles.Entries">
            <summary>
            Get a list of all the file entries
            </summary>
            <returns>The most recent file list</returns>
        </member>
        <member name="M:NUnit.Engine.IRecentFiles.SetMostRecent(System.String)">
            <summary>
            Set the most recent file name, reordering
            the saved names as needed and removing the oldest
            if the max number of files would be exceeded.
            The current CLR version is used to create the entry.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IRecentFiles.Remove(System.String)">
            <summary>
            Remove a file from the list
            </summary>
            <param name="fileName">The name of the file to remove</param>
        </member>
        <member name="T:NUnit.Engine.IResultService">
            <summary>
            IResultWriterService provides result writers for a specified
            well-known format.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IResultService.Formats">
            <summary>
            Gets an array of the available formats
            </summary>
        </member>
        <member name="M:NUnit.Engine.IResultService.GetResultWriter(System.String,System.Object[])">
            <summary>
            Gets a ResultWriter for a given format and set of arguments.
            </summary>
            <param name="format">The name of the format to be used</param>
            <param name="args">A set of arguments to be used in constructing the writer or null if non arguments are needed</param>
            <returns>An IResultWriter</returns>
        </member>
        <member name="T:NUnit.Engine.IRuntimeFramework">
            <summary>
            Interface implemented by objects representing a runtime framework.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRuntimeFramework.Id">
            <summary>
            Gets the inique Id for this runtime, such as "net-4.5"
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRuntimeFramework.DisplayName">
            <summary>
            Gets the display name of the framework, such as ".NET 4.5"
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRuntimeFramework.FrameworkVersion">
            <summary>
            Gets the framework version: usually contains two components, Major
            and Minor, which match the corresponding CLR components, but not always.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRuntimeFramework.ClrVersion">
            <summary>
            Gets the Version of the CLR for this framework
            </summary>
        </member>
        <member name="P:NUnit.Engine.IRuntimeFramework.Profile">
            <summary>
            Gets a string representing the particular profile installed,
            or null if there is no profile. Currently. the only defined 
            values are Full and Client.
            </summary>
        </member>
        <member name="T:NUnit.Engine.IRuntimeFrameworkService">
            <summary>
            Implemented by a type that provides information about the
            current and other available runtimes.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IRuntimeFrameworkService.IsAvailable(System.String)">
            <summary>
            Returns true if the runtime framework represented by
            the string passed as an argument is available.
            </summary>
            <param name="framework">A string representing a framework, like 'net-4.0'</param>
            <returns>True if the framework is available, false if unavailable or nonexistent</returns>
        </member>
        <member name="M:NUnit.Engine.IRuntimeFrameworkService.SelectRuntimeFramework(NUnit.Engine.TestPackage)">
             <summary>
             Selects a target runtime framework for a TestPackage based on
             the settings in the package and the assemblies themselves.
             The package RuntimeFramework setting may be updated as a 
             result and the selected runtime is returned.
            
             Note that if a package has subpackages, the subpackages may run on a different
             framework to the top-level package. In future, this method should
             probably not return a simple string, and instead require runners
             to inspect the test package structure, to find all desired frameworks.
             </summary>
             <param name="package">A TestPackage</param>
             <returns>The selected RuntimeFramework</returns>
        </member>
        <member name="T:NUnit.Engine.ServiceStatus">
            <summary>
            Enumeration representing the status of a service
            </summary>
        </member>
        <member name="F:NUnit.Engine.ServiceStatus.Stopped">
            <summary>Service was never started or has been stopped</summary>
        </member>
        <member name="F:NUnit.Engine.ServiceStatus.Started">
            <summary>Started successfully</summary>
        </member>
        <member name="F:NUnit.Engine.ServiceStatus.Error">
            <summary>Service failed to start and is unavailable</summary>
        </member>
        <member name="T:NUnit.Engine.IService">
            <summary>
            The IService interface is implemented by all Services. Although it
            is extensible, it does not reside in the Extensibility namespace
            because it is so widely used by the engine.
            </summary>
        </member>
        <member name="P:NUnit.Engine.IService.ServiceContext">
            <summary>
            The ServiceContext
            </summary>
        </member>
        <member name="P:NUnit.Engine.IService.Status">
            <summary>
            Gets the ServiceStatus of this service
            </summary>
        </member>
        <member name="M:NUnit.Engine.IService.StartService">
            <summary>
            Initialize the Service
            </summary>
        </member>
        <member name="M:NUnit.Engine.IService.StopService">
            <summary>
            Do any cleanup needed before terminating the service
            </summary>
        </member>
        <member name="T:NUnit.Engine.IServiceLocator">
            <summary>
            IServiceLocator allows clients to locate any NUnit services
            for which the interface is referenced. In normal use, this
            linits it to those services using interfaces defined in the 
            nunit.engine.api assembly.
            </summary>
        </member>
        <member name="M:NUnit.Engine.IServiceLocator.GetService``1">
            <summary>
            Return a specified type of service
            </summary>
        </member>
        <member name="M:NUnit.Engine.IServiceLocator.GetService(System.Type)">
            <summary>
            Return a specified type of service
            </summary>
        </member>
        <member name="T:NUnit.Engine.SettingsEventHandler">
            <summary>
            Event handler for settings changes
            </summary>
            <param name="sender">The sender.</param>
            <param name="args">The <see cref="T:NUnit.Engine.SettingsEventArgs"/> instance containing the event data.</param>
        </member>
        <member name="T:NUnit.Engine.SettingsEventArgs">
            <summary>
            Event argument for settings changes
            </summary>
        </member>
        <member name="M:NUnit.Engine.SettingsEventArgs.#ctor(System.String)">
            <summary>
            Initializes a new instance of the <see cref="T:NUnit.Engine.SettingsEventArgs"/> class.
            </summary>
            <param name="settingName">Name of the setting that has changed.</param>
        </member>
        <member name="P:NUnit.Engine.SettingsEventArgs.SettingName">
            <summary>
            Gets the name of the setting that has changed
            </summary>
        </member>
        <member name="T:NUnit.Engine.ISettings">
            <summary>
            The ISettings interface is used to access all user
            settings and options.
            </summary>
        </member>
        <member name="E:NUnit.Engine.ISettings.Changed">
            <summary>
            Occurs when the settings are changed.
            </summary>
        </member>
        <member name="M:NUnit.Engine.ISettings.GetSetting(System.String)">
            <summary>
            Load a setting from the storage.
            </summary>
            <param name="settingName">Name of the setting to load</param>
            <returns>Value of the setting or null</returns>
        </member>
        <member name="M:NUnit.Engine.ISettings.GetSetting``1(System.String,``0)">
            <summary>
            Load a setting from the storage or return a default value
            </summary>
            <param name="settingName">Name of the setting to load</param>
            <param name="defaultValue">Value to return if the setting is missing</param>
            <returns>Value of the setting or the default value</returns>
        </member>
        <member name="M:NUnit.Engine.ISettings.RemoveSetting(System.String)">
            <summary>
            Remove a setting from the storage
            </summary>
            <param name="settingName">Name of the setting to remove</param>
        </member>
        <member name="M:NUnit.Engine.ISettings.RemoveGroup(System.String)">
            <summary>
            Remove an entire group of settings from the storage
            </summary>
            <param name="groupName">Name of the group to remove</param>
        </member>
        <member name="M:NUnit.Engine.ISettings.SaveSetting(System.String,System.Object)">
            <summary>
            Save a setting in the storage
            </summary>
            <param name="settingName">Name of the setting to save</param>
            <param name="settingValue">Value to be saved</param>
        </member>
        <member name="T:NUnit.Engine.ITestEngine">
            <summary>
            ITestEngine represents an instance of the test engine.
            Clients wanting to discover, explore or run tests start
            require an instance of the engine, which is generally
            acquired from the TestEngineActivator class.
            </summary>
        </member>
        <member name="P:NUnit.Engine.ITestEngine.Services">
            <summary>
            Gets the IServiceLocator interface, which gives access to
            certain services provided by the engine.
            </summary>
        </member>
        <member name="P:NUnit.Engine.ITestEngine.WorkDirectory">
            <summary>
            Gets and sets the directory path used by the engine for saving files.
            Some services may ignore changes to this path made after initialization.
            The default value is the current directory.
            </summary>
        </member>
        <member name="P:NUnit.Engine.ITestEngine.InternalTraceLevel">
            <summary>
            Gets and sets the InternalTraceLevel used by the engine. Changing this
            setting after initialization will have no effect. The default value
            is the value saved in the NUnit settings.
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestEngine.Initialize">
             <summary>
             Initialize the engine. This includes initializing mono addins,
             setting the trace level and creating the standard set of services
             used in the Engine.
            
             This interface is not normally called by user code. Programs linking
             only to the nunit.engine.api assembly are given a
             pre-initialized instance of TestEngine. Programs
             that link directly to nunit.engine usually do so
             in order to perform custom initialization.
             </summary>
        </member>
        <member name="M:NUnit.Engine.ITestEngine.GetRunner(NUnit.Engine.TestPackage)">
            <summary>
            Returns a test runner instance for use by clients in discovering,
            exploring and executing tests.
            </summary>
            <param name="package">The TestPackage for which the runner is intended.</param>
            <returns>An ITestRunner.</returns>
        </member>
        <member name="T:NUnit.Engine.ITestEventListener">
            <summary>
            The ITestListener interface is used to receive notices of significant
            events while a test is running. Its single method accepts an Xml string,
            which may represent any event generated by the test framework, the driver
            or any of the runners internal to the engine. Use of Xml means that
            any driver and framework may add additional events and the engine will
            simply pass them on through this interface.
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestEventListener.OnTestEvent(System.String)">
            <summary>
            Handle a progress report or other event.
            </summary>
            <param name="report">An XML progress report.</param>
        </member>
        <member name="T:NUnit.Engine.ITestFilterBuilder">
            <summary>
            Interface to a TestFilterBuilder, which is used to create TestFilters
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestFilterBuilder.AddTest(System.String)">
            <summary>
            Add a test to be selected
            </summary>
            <param name="fullName">The full name of the test, as created by NUnit</param>
        </member>
        <member name="M:NUnit.Engine.ITestFilterBuilder.SelectWhere(System.String)">
            <summary>
            Specify what is to be included by the filter using a where clause.
            </summary>
            <param name="whereClause">A where clause that will be parsed by NUnit to create the filter.</param>
        </member>
        <member name="M:NUnit.Engine.ITestFilterBuilder.GetFilter">
            <summary>
            Get a TestFilter constructed according to the criteria specified by the other calls.
            </summary>
            <returns>A TestFilter.</returns>
        </member>
        <member name="T:NUnit.Engine.ITestFilterService">
            <summary>
            The TestFilterService provides builders that can create TestFilters
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestFilterService.GetTestFilterBuilder">
            <summary>
            Get an uninitialized TestFilterBuilder
            </summary>
        </member>
        <member name="T:NUnit.Engine.ITestRun">
            <summary>
            The ITestRun class represents an ongoing test run.
            </summary>
        </member>
        <member name="P:NUnit.Engine.ITestRun.Result">
            <summary>
            Get the result of the test.
            </summary>
            <returns>An XmlNode representing the test run result</returns>
        </member>
        <member name="M:NUnit.Engine.ITestRun.Wait(System.Int32)">
            <summary>
            Blocks the current thread until the current test run completes
            or the timeout is reached
            </summary>
            <param name="timeout">A <see cref="T:System.Int32"/> that represents the number of milliseconds to wait or -1 milliseconds to wait indefinitely. </param>
            <returns>True if the run completed</returns>
        </member>
        <member name="T:NUnit.Engine.ITestRunner">
            <summary>
            Interface implemented by all test runners.
            </summary>
        </member>
        <member name="P:NUnit.Engine.ITestRunner.IsTestRunning">
            <summary>
            Get a flag indicating whether a test is running
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.Load">
            <summary>
            Load a TestPackage for possible execution
            </summary>
            <returns>An XmlNode representing the loaded package.</returns>
            <remarks>
            This method is normally optional, since Explore and Run call
            it automatically when necessary. The method is kept in order
            to make it easier to convert older programs that use it.
            </remarks>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.Unload">
            <summary>
            Unload any loaded TestPackage. If none is loaded,
            the call is ignored.
            </summary>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.Reload">
            <summary>
            Reload the current TestPackage
            </summary>
            <returns>An XmlNode representing the loaded package.</returns>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.CountTestCases(NUnit.Engine.TestFilter)">
            <summary>
            Count the test cases that would be run under
            the specified filter.
            </summary>
            <param name="filter">A TestFilter</param>
            <returns>The count of test cases</returns>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.Run(NUnit.Engine.ITestEventListener,NUnit.Engine.TestFilter)">
            <summary>
            Run the tests in the loaded TestPackage and return a test result. The tests
            are run synchronously and the listener interface is notified as it progresses.
            </summary>
            <param name="listener">The listener that is notified as the run progresses</param>
            <param name="filter">A TestFilter used to select tests</param>
            <returns>An XmlNode giving the result of the test execution</returns>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.RunAsync(NUnit.Engine.ITestEventListener,NUnit.Engine.TestFilter)">
            <summary>
            Start a run of the tests in the loaded TestPackage. The tests are run
            asynchronously and the listener interface is notified as it progresses.
            </summary>
            <param name="listener">The listener that is notified as the run progresses</param>
            <param name="filter">A TestFilter used to select tests</param>
            <returns></returns>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.StopRun(System.Boolean)">
            <summary>
            Cancel the ongoing test run. If no  test is running, the call is ignored.
            </summary>
            <param name="force">If true, cancel any ongoing test threads, otherwise wait for them to complete.</param>
        </member>
        <member name="M:NUnit.Engine.ITestRunner.Explore(NUnit.Engine.TestFilter)">
            <summary>
            Explore a loaded TestPackage and return information about the tests found.
            </summary>
            <param name="filter">The TestFilter to be used in selecting tests to explore.</param>
            <returns>An XmlNode representing the tests found.</returns>
        </member>
        <member name="T:NUnit.Engine.TestEngineActivator">
            <summary>
            TestEngineActivator creates an instance of the test engine and returns an ITestEngine interface.
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestEngineActivator.CreateInstance(System.Boolean)">
            <summary>
            Create an instance of the test engine.
            </summary>
            <param name="unused">This parameter is no longer used but has not been removed to ensure API compatibility.</param>
            <exception cref="T:NUnit.Engine.NUnitEngineNotFoundException">Thrown when a test engine of the required minimum version is not found</exception>
            <returns>An <see cref="T:NUnit.Engine.ITestEngine"/></returns>
        </member>
        <member name="M:NUnit.Engine.TestEngineActivator.CreateInstance(System.Version,System.Boolean)">
            <summary>
            Create an instance of the test engine with a minimum version.
            </summary>
            <param name="minVersion">The minimum version of the engine to return inclusive.</param>
            <param name="unused">This parameter is no longer used but has not been removed to ensure API compatibility.</param>
            <exception cref="T:NUnit.Engine.NUnitEngineNotFoundException">Thrown when a test engine of the required minimum version is not found</exception>
            <returns>An <see cref="T:NUnit.Engine.ITestEngine"/></returns>
        </member>
        <member name="T:NUnit.Engine.TestFilter">
            <summary>
            Abstract base for all test filters. A filter is represented
            by an XmlNode with &lt;filter&gt; as its topmost element.
            In the console runner, filters serve only to carry this
            XML representation, as all filtering is done by the engine.
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestFilter.#ctor(System.String)">
            <summary>
            Initializes a new instance of the <see cref="T:NUnit.Engine.TestFilter"/> class.
            </summary>
            <param name="xmlText">The XML text that specifies the filter.</param>
        </member>
        <member name="F:NUnit.Engine.TestFilter.Empty">
            <summary>
            The empty filter - one that always passes.
            </summary>
        </member>
        <member name="P:NUnit.Engine.TestFilter.Text">
            <summary>
            Gets the XML representation of this filter as a string.
            </summary>
        </member>
        <member name="T:NUnit.Engine.TestPackage">
            <summary>
            TestPackage holds information about a set of test files to
            be loaded by a TestRunner. Each TestPackage represents
            tests for one or more test files. TestPackages may be named
            or anonymous, depending on the constructor used.
            
            Upon construction, a package is given an ID (string), which
            remains unchanged for the lifetime of the TestPackage instance.
            The package ID is passed to the test framework for use in generating
            test IDs.
            
            A runner that reloads test assemblies and wants the ids to remain stable
            should avoid creating a new package but should instead use the original
            package, changing settings as needed. This gives the best chance for the
            tests in the reloaded assembly to match those originally loaded.
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestPackage.#ctor(System.String)">
            <summary>
            Construct a named TestPackage, specifying a file path for
            the assembly or project to be used.
            </summary>
            <param name="filePath">The file path.</param>
        </member>
        <member name="M:NUnit.Engine.TestPackage.#ctor(System.Collections.Generic.IList{System.String})">
            <summary>
            Construct an anonymous TestPackage that wraps test files.
            </summary>
            <param name="testFiles"></param>
        </member>
        <member name="P:NUnit.Engine.TestPackage.ID">
            <summary>
            Every test package gets a unique ID used to prefix test IDs within that package.
            </summary>
            <remarks>
            The generated ID is only unique for packages created within the same application domain.
            For that reason, NUnit pre-creates all test packages that will be needed.
            </remarks>
        </member>
        <member name="P:NUnit.Engine.TestPackage.Name">
            <summary>
            Gets the name of the package
            </summary>
        </member>
        <member name="P:NUnit.Engine.TestPackage.FullName">
            <summary>
            Gets the path to the file containing tests. It may be
            an assembly or a recognized project type.
            </summary>
        </member>
        <member name="P:NUnit.Engine.TestPackage.SubPackages">
            <summary>
            Gets the list of SubPackages contained in this package
            </summary>
        </member>
        <member name="P:NUnit.Engine.TestPackage.Settings">
            <summary>
            Gets the settings dictionary for this package.
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestPackage.AddSubPackage(NUnit.Engine.TestPackage)">
            <summary>
            Add a subproject to the package.
            </summary>
            <param name="subPackage">The subpackage to be added</param>
        </member>
        <member name="M:NUnit.Engine.TestPackage.AddSetting(System.String,System.Object)">
            <summary>
            Add a setting to a package and all of its subpackages.
            </summary>
            <param name="name">The name of the setting</param>
            <param name="value">The value of the setting</param>
            <remarks>
            Once a package is created, subpackages may have been created
            as well. If you add a setting directly to the Settings dictionary
            of the package, the subpackages are not updated. This method is
            used when the settings are intended to be reflected to all the
            subpackages under the package.
            </remarks>
        </member>
        <member name="M:NUnit.Engine.TestPackage.GetSetting``1(System.String,``0)">
            <summary>
            Return the value of a setting or a default.
            </summary>
            <param name="name">The name of the setting</param>
            <param name="defaultSetting">The default value</param>
            <returns></returns>
        </member>
        <member name="T:NUnit.Engine.TestSelectionParserException">
            <summary>
            TestSelectionParserException is thrown when an error
            is found while parsing the selection expression.
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestSelectionParserException.#ctor(System.String)">
            <summary>
            Construct with a message
            </summary>
        </member>
        <member name="M:NUnit.Engine.TestSelectionParserException.#ctor(System.String,System.Exception)">
            <summary>
            Construct with a message and inner exception
            </summary>
            <param name="message"></param>
            <param name="innerException"></param>
        </member>
        <member name="M:NUnit.Engine.TestSelectionParserException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
            <summary>
            Serialization constructor
            </summary>
        </member>
    </members>
</doc>

tools\nunit.engine.api.dll

md5: 9D3782EAB4792DB1A2FD1C46B0959992 | sha1: DF037F908BCD8BD2DC7FF7DDA28F61476C0DA85E | sha256: 2781B49EFC0D37049C52FED23527FB78F71E974577E835D68D49284F66792135 | sha512: E7D3CADB36C76721FAEC3CBB59F873880888CD59C0E95E43BE4342F5FDD72D7908271DA469C4325B0EC799671D8DD93A0500022DBEF6DEA3B9AB26AB3AEB675A

tools\nunit.choco.addins

tools\NOTICES.txt

NUnit 3.0 is based on earlier versions of NUnit, with Portions

Copyright (c) 2002-2014 Charlie Poole or 
Copyright (c) 2002-2004 James W. Newkirk, Michael C. Two, Alexei A. Vorontsov or 
Copyright (c) 2000-2002 Philip A. Craig

tools\LICENSE.txt

Copyright (c) 2021 Charlie Poole, Rob Prouse

Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.

Virus Scan Results

nunit-console-runner.3.13.0.nupkg (b8b70fac26e6) - ## / 60
nunit.engine.api.dll (2781b49efc0d) - ## / 66
nunit.engine.core.dll (5c34d84c1be8) - ## / 61
nunit.engine.dll (c485eef448ea) - ## / 58
nunit3-console.exe (b0dbbdac75be) - ## / 65
testcentric.engine.metadata.dll (9b6975c9821f) - ## / 73
nunit-agent-x86.exe (bbf614a3fe3b) - ## / 66
nunit-agent.exe (11345ef3fead) - ## / 61
nunit-agent-x86.exe (2fe2a8bd0160) - ## / 64
nunit-agent.exe (a58b6ea242ac) - ## / 65
testcentric.engine.metadata.dll (b08bf44fd327) - ## / 70
nunit-agent.dll (33d2ae69548a) - ## / 67
nunit.engine.api.dll (12889e7a8e6d) - ## / 64
nunit.engine.core.dll (dbe0ccaf24f7) - ## / 63
testcentric.engine.metadata.dll (69e4533ee53b) - ## / 73

In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).

Chocolatey Pro provides runtime protection from possible malware.

Version History

Version	Downloads	Last Updated	Status
NUnit 3 Console Runner 3.18.3	6323	Tuesday, October 8, 2024	Approved
NUnit 3 Console Runner 3.18.2	3300	Thursday, September 19, 2024	Approved
NUnit 3 Console Runner 3.18.1	9590	Thursday, July 18, 2024	Approved
NUnit 3 Console Runner 3.18.0	307	Wednesday, July 17, 2024	Approved
NUnit 3 Console Runner 3.17.0	34569	Wednesday, January 24, 2024	Approved
NUnit 3 Console Runner 3.15.2	13813	Wednesday, June 29, 2022	Approved
NUnit 3 Console Runner 3.15.1	113	Wednesday, June 29, 2022	Approved
NUnit 3 Console Runner 3.15.0	14528	Thursday, February 10, 2022	Approved
NUnit 3 Console Runner 3.15.0-beta1	91	Monday, February 7, 2022	Approved
NUnit 3 Console Runner 3.14.0	3896	Saturday, January 15, 2022	Approved
NUnit 3 Console Runner 3.13.2	1743	Thursday, January 6, 2022	Approved
NUnit 3 Console Runner 3.13.1	300	Tuesday, January 4, 2022	Approved
NUnit 3 Console Runner 3.13.0	3230	Wednesday, December 1, 2021	Approved
NUnit 3 Console Runner 3.12.0	33006	Sunday, January 17, 2021	Approved
NUnit 3 Console Runner 3.12.0-beta1	599	Saturday, August 1, 2020	Approved
NUnit 3 Console Runner 3.11.1	24560	Monday, February 17, 2020	Approved
NUnit 3 Console Runner 3.10.0	39112	Sunday, March 24, 2019	Approved
NUnit 3 Console Runner 3.9.0	11532	Thursday, September 6, 2018	Approved
NUnit 3 Console Runner 3.8.0	30947	Tuesday, January 30, 2018	Approved
NUnit 3 Console Runner 3.7.0	2000	Friday, July 14, 2017	Approved
NUnit 3 Console Runner 3.6.1	8100	Friday, July 7, 2017	Approved

Release Notes

https://docs.nunit.org/articles/nunit/release-notes/console-and-engine.html

Dependencies

This package has no dependencies.

Discussion for the NUnit 3 Console Runner Package

Ground Rules:

This discussion is only about NUnit 3 Console Runner and the NUnit 3 Console Runner package. If you have feedback for Chocolatey, please contact the Google Group.
This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
Tell us what you love about the package or NUnit 3 Console Runner, or tell us what needs improvement.
Share your experiences with the package, or extra configuration or gotchas that you've found.
If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.

Resources

Events

Courses

298,571

3,230

01 Dec 2021

NUnit 3 Console Runner

NUnit 3 Console Runner 3.13.0

Some Checks Have Failed or Are Not Yet Complete

Deployment Method: Individual Install, Upgrade, & Uninstall

Deployment Method:

1. Enter Your Internal Repository Url

2. Setup Your Environment

1. Ensure you are set for organizational deployment

2. Get the package into your environment

3. Copy Your Script

4. If applicable - Chocolatey configuration/installation

Ground Rules: