Downloads of v 9.6.1:


Last Update:

07 May 2021

Package Maintainer(s):

Software Author(s):

  • Jan Adamec


roomarranger room arranger floor apartment planner 3d trial

Room Arranger

This is not the latest version of Room Arranger available.

  • 1
  • 2
  • 3

9.6.1 | Updated: 07 May 2021



Downloads of v 9.6.1:



Software Author(s):

  • Jan Adamec

  • 1
  • 2
  • 3
Room Arranger 9.6.1

This is not the latest version of Room Arranger available.

  • 1
  • 2
  • 3

All Checks are Passing

3 Passing Tests

Validation Testing Passed

Verification Testing Passed


Scan Testing Successful:

No detections found in any package files

Learn More

Deployment Method: Individual Install, Upgrade, & Uninstall

To install Room Arranger, run the following command from the command line or from PowerShell:


To upgrade Room Arranger, run the following command from the command line or from PowerShell:


To uninstall Room Arranger, run the following command from the command line or from PowerShell:


Deployment Method:

📝 NOTE: This applies to both open source and commercial editions of Chocolatey.

1. Enter Your Internal Repository Url

(this should look similar to

2. Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

  • Open Source or Commercial:
    • Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
    • You can also just download the package and push it to a repository Download

3. Copy Your Script

choco upgrade roomarranger -y --source="'INTERNAL REPO URL'" --version="'9.6.1'" [other options]

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:

choco upgrade roomarranger -y --source="'INTERNAL REPO URL'" --version="'9.6.1'" 

Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
  Exit 0

Exit $exitCode

- name: Install roomarranger
    name: roomarranger
    version: '9.6.1'
    state: present

See docs at

chocolatey_package 'roomarranger' do
  action    :install
  source   'INTERNAL REPO URL'
  version  '9.6.1'

See docs at

cChocoPackageInstaller roomarranger
    Name     = "roomarranger"
    Version  = "9.6.1"
    Source   = "INTERNAL REPO URL"

Requires cChoco DSC Resource. See docs at

package { 'roomarranger':
  ensure   => '9.6.1',
  provider => 'chocolatey',
  source   => 'INTERNAL REPO URL',

Requires Puppet Chocolatey Provider module. See docs at

4. If applicable - Chocolatey configuration/installation

See infrastructure management matrix for Chocolatey configuration elements and examples.

This package was approved as a trusted package on 07 May 2021.



This installs a 30 day shareware. You can register it using the following parameters:

License code: /licenseCode:"<your license code>"
Name of the license holder: /licenseName:"<your name>"

-params '"/licenseCode:1234-5678-900 /licenseName:""John Doe"""'

Reasons to Choose Room Arranger

Easy to Use

Room Arranger is small and compact piece of software. Still it lets you design nearly anything you imagine. Once you understand the basics it's easy to bring it to next level.
heart Nearly all functions have keyboard shortcuts, so you can learn to be pretty fast in Room Arranger.

Our motto: Keep It Simple, Stupid...

3D Visualization

3D can give you a better impression of your design. Room Arranger will not only let you fly around the scene, but you can also walk through it like in reality.
BTW, did you know you can have multiple floors in the single project?

And you can make movies here too.

Build on Floor Plan Image

floorplan Drawing walls can be quite time consuming for apartment or house design. So there is a way to make it easier in case you have an image or photo of the floor plan.
Just load the image of the floor plan into the Wall Editor, calibrate it, and draw walls on top of it. Read more...

Wide Object Library

sofa There are nearly 300 objects in the standard object library. Furniture, and other equipment. For each of them, you can modify their dimensions exactly as you need - you are not limited to what we think is the most common.
Additionally you can quickly and easily design all your special objects directly in Room Arranger, there is a set of 3D objects just for such needs. Some users contributed to our On-line object library and shared their work.


There is a measurement tool in Room Arranger that helps you to check if there is enough space left for other objects, or just visualize the dimensions in the project.
The software also measures the room areas, wall areas and other useful values. It will let you copy - paste them to Excel for further processing.

Printing is the integral part of designer's work. We try to make this output precisely and in high quality. Professional architects usually require printouts in exact 1:50 or 1:100 scale, which is possible in Room Arranger.
print In case you have only small A4 printer, the software manages to print the project over more pages. You will just glue all sheets of paper together.


Even if Room Arranger is already easy, there is a huge chance you can switch the program to your language and understand it even better. All translations are included in the main setup file.
The translations are provided by native speaking fans. Thanks to them.

dollar We let you use our fully functional software for 30 days for free. Afterwards, if you are satisfied with it, you have to register your license. The fee is $20, which is pretty low for software of this type.
And the best part, you get all the future updates for free.


EULA - End User License Agreement
This is license agreement is a legal agreement between you (an individual person or a single legal entity, “You”) and Jan Adamec (the “Author”) for Room Arranger (the “Software”). By installing this software you are agreeing to this license agreement.

1. Shareware/ Demo/ Evaluation License
The product you obtain labeled as SHAREWARE means that you may evaluate it free of charge for a period of 30 days, after which you are required to register the software, and thus enable the full functionality of the Software after 30 days by purchasing a serial number. Before doing so, it is strongly recommended to evaluate the Software.

2. Distribution of Shareware Version
You may distribute the SHAREWARE version of this program to any website/person as long as you include the original setup program in unmodified state.

You may also include this SHAREWARE version on any CD/DVD compilation as long as you:

only distribute the shareware version
do not charge for the CD (apart from normal handling/distribution costs)
3. Ordering the Full Version
Once you have evaluated the Software, or the 30 day period has expired, you will need to register the software. On your accepted order, and payment of the applicable fee, the Author will provide a serial number or other mechanism to you for conversion of an evaluation limited license to a non-evaluation, full restricted license. YOU MAY NOT COPY OR DISTRIBUTE THIS SOFTWARE ONCE IT IS REGISTERED.

A single user license permits a registered user (licensee) to use one copy of the Program only on a single computer at a time.

The usage by multiple users at the same time (on multiple computers) requires additional licenses. Additional licenses allow an institution or company to install or use the Program on multiple computers or on a server. It must be guaranteed that the Program does not run on more machines at the same time than there are licenses purchased.

4. Ownership of the Program
You agree and acknowledge that Author transfers no ownership interest in any Program or part Program, or in the intellectual property in any Program or in any Program copy, to you under this Agreement or otherwise, and that the Author reserve all rights not expressly granted to you in this License Agreement.

5. Defects in the Program
Although this software has been extensively tested, the Author DOES NOT WARRANT that this Program will be completely defect free, or that any bugs found are correctable or will be corrected.

6. Limitation of Liability
The Software is provided “as-is”, and no warranties of any kind (including implied warranties of merchantability or fitness for a particular purpose), express or implied, are made as to it or any medium it may be on. Under no circumstances will the author provides any other remedy for direct, indirect, special, consequential, punitive, incidental or other damages arising from it, including such from negligence, strict liability, or breach of warranty or contract, even after notice of the possibility of such damages.

Installing and using the Software signifies acceptance and agreement to the terms and conditions of this license.

If you do not agree with the terms of this license you must cease to use the Software and remove the Software from your storage devices.

This Agreement is governed by the laws of Czech Republic.
Verification is intended to assist the Chocolatey moderators and community
in verifying that this package's contents are trustworthy.
Package can be verified like this:
1. Download:
2. You can use one of the following methods to obtain the SHA256 checksum:
   - Use powershell function 'Get-FileHash'
   - Use Chocolatey utility 'checksum.exe'
   checksum type: sha256
   checksum32: 887E806F99664CF3EF22D2F4B3409C201E0CCB5FB46A031FF1ABD1F8491505B9
   checksum64: 17D720BAE9D8CB37A7C44CBE67645046D13906F1E91EAB633611B4DF8C75A182
File 'LICENSE.txt' is obtained from:
$ErrorActionPreference = 'Stop';
$toolsDir = "$(Split-Path -parent $MyInvocation.MyCommand.Definition)"

$packageArgs = @{
  packageName = $env:ChocolateyPackageName
  destination = "$toolsDir"
  file        = "$toolsDir\rooarr961.exe"
  file64      = "$toolsDir\rooarr961_64bit.exe"
  silentArgs	= '/S'

Install-ChocolateyInstallPackage @packageArgs

$pp = Get-PackageParameters
if ($pp['licenseCode'] -And $pp['licenseName']) {
    $licenseCode = $pp['licenseCode']
    $licenseName = $pp['licenseName']
    $registrationFile = Join-Path ([environment]::getfolderpath("mydocuments")) "Room Arranger\regbak.rrg"
    "[Options]" > $registrationFile
    "RegName=$licenseName" >> $registrationFile
    "RegNumber=$licenseCode" >> $registrationFile
$ErrorActionPreference = 'Stop';

$packageArgs = @{
  packageName  = $env:ChocolateyPackageName
  softwareName = 'Room Arranger*'
  fileType     = 'exe'
  silentArgs   = '/S'

$uninstalled = $false
[array]$key = Get-UninstallRegistryKey -SoftwareName $packageArgs['softwareName']

if ($key.Count -eq 1) {
  $key | % {
    $packageArgs['file'] = "$($_.UninstallString)"
    Uninstall-ChocolateyPackage @packageArgs
} elseif ($key.Count -eq 0) {
  Write-Warning "$packageName has already been uninstalled by other means."
} elseif ($key.Count -gt 1) {
  Write-Warning "$($key.Count) matches found!"
  Write-Warning "To prevent accidental data loss, no programs will be uninstalled."
  Write-Warning "Please alert package maintainer the following keys were matched:"
  $key | % {Write-Warning "- $($_.DisplayName)"}
md5: 6A3B11E7C0929BC9C278715283A4059F | sha1: C10D7E82E4BC01BB04733173EB8F1E01655E28D1 | sha256: 887E806F99664CF3EF22D2F4B3409C201E0CCB5FB46A031FF1ABD1F8491505B9 | sha512: 46216A000171A098F6AD213EC7DE95A960579095984A54ADDC680C87EF581354DCC7452EB7715B302501B985CB79F3A7D87B36C5A8577F68EEA0B6F2E511F735
md5: C7F329CC547D46D4DEC550296C854FE0 | sha1: 23D5FB65DE4EEB2279C6F45881C6126850868D0D | sha256: 17D720BAE9D8CB37A7C44CBE67645046D13906F1E91EAB633611B4DF8C75A182 | sha512: 71C7FC500798BA26AC9DFD04FED15F263C19D4A396CBBD1BADD23210D3E83EFA79676FDFC1A8F166B02A9EA7523DF4D0E6350D5951548C6DC233A5CE5F250615

Log in or click on link to see number of positives.

In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).

Chocolatey Pro provides runtime protection from possible malware.

Add to Builder Version Downloads Last Updated Status
Room Arranger 9.6.1 169 Friday, May 7, 2021 Approved
Room Arranger 9.6 123 Tuesday, December 29, 2020 Approved
Room Arranger 9.5.6 303 Tuesday, February 25, 2020 Approved
Room Arranger 9.5.5 316 Saturday, May 4, 2019 Approved
Room Arranger 8.4.1 571 Monday, April 18, 2016 Approved
Room Arranger 8.4.0 342 Friday, April 15, 2016 Approved
Room Arranger 8.3.1 342 Monday, December 21, 2015 Approved

This package has no dependencies.

Discussion for the Room Arranger Package

Ground Rules:

  • This discussion is only about Room Arranger and the Room Arranger package. If you have feedback for Chocolatey, please contact the Google Group.
  • This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
  • The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
  • Tell us what you love about the package or Room Arranger, or tell us what needs improvement.
  • Share your experiences with the package, or extra configuration or gotchas that you've found.
  • If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.
comments powered by Disqus