Step 1: Review Your Packages

Step 2: Choose Your Integration Method

Step 3: Copy Your Script or Download Config

Option 1: Copy Script

Option 2: Download Config

Step 4: Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the packages and push them to a repository
  Download Packages

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the packages:
  Download Packages
- Follow manual internalization instructions
Package Internalizer (C4B)
- Run: (additional options)
- For package and dependencies run:
- Automate package internalization

Step 5: Copy Your Script

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###

#### We initialize a few things that are needed by this script - there are no other requirements.
$ErrorActionPreference = "Stop"

#### Set TLS 1.2 (3072) as that is the minimum required by various up-to-date repositories.
#### Use integers because the enumeration value for TLS 1.2 won't exist
#### in .NET 4.0, even though they are addressable if .NET 4.5+ is
#### installed (.NET 4.5 is an in-place upgrade).
[System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072

#### We use this variable for future REST calls.
$RequestArguments = @{
    UseBasicParsing = $true
}

## 2. TOP LEVEL VARIABLES ##

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# $NugetRepositoryCredential = [PSCredential]::new(
#     "username",
#     ("password" | ConvertTo-SecureString -AsPlainText -Force)
# )
# $RequestArguments.Credential = $NugetRepositoryCredential

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it
$ChocolateyDownloadUrl = "$($NugetRepositoryUrl.TrimEnd('/'))/package/chocolatey.2.4.0.nupkg"

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# $ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

#### Download the Nupkg, appending .zip to the filename to handle archive cmdlet limitations
if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    $TempDirectory = Join-Path $env:Temp "chocolateyInstall"
    if (-not (Test-Path $TempDirectory -PathType Container)) {
        $null = New-Item -Path $TempDirectory -ItemType Directory
    }
    $DownloadedNupkg = Join-Path $TempDirectory "$(Split-Path $ChocolateyDownloadUrl -Leaf).zip"
    Invoke-WebRequest -Uri $ChocolateyDownloadUrl -OutFile $DownloadedNupkg @RequestArguments

    #### Extract the Nupkg, and run the chocolateyInstall script
    if (Get-Command Microsoft.PowerShell.Archive\Expand-Archive -ErrorAction SilentlyContinue) {
        Microsoft.PowerShell.Archive\Expand-Archive -Path $DownloadedNupkg -DestinationPath $TempDirectory -Force
    } else {
        # PowerShell versions <4.0 do not have this function available
        try {
            $shellApplication = New-Object -ComObject Shell.Application
            $zipPackage = $shellApplication.NameSpace($DownloadedNupkg)
            $destinationFolder = $shellApplication.NameSpace($TempDirectory)
            $destinationFolder.CopyHere($zipPackage.Items(), 0x10)
        } catch {
            Write-Warning "Unable to unzip package using built-in compression."
            throw $_
        }
    }

    & $(Join-Path $TempDirectory "tools\chocolateyInstall.ps1")
}

if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    refreshenv
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# choco feature enable -n useFipsCompliantChecksums

### b. Apply Recommended Configuration ###
#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
choco config set --name cacheLocation --value C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
choco config set --name commandExecutionTimeoutSeconds --value 14400

#### Turn off download progress when running choco through integrations
choco feature disable --name showDownloadProgress

### c. Sources ###
#### Remove the default community package repository source
choco source list --limitoutput | ConvertFrom-Csv -Header 'Name', 'Location' -Delimiter '|' | ForEach-Object {
    if ($_.Location -eq 'https://community.chocolatey.org/api/v2/') {
        choco source remove -n $_.Name
    }
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
if ($NugetRepositoryCredential) {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --user $NugetRepositoryCredential.UserName --password $NugetRepositoryCredential.GetNetworkCredential().Password --priority 1
} else {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --priority 1
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
choco upgrade chocolatey --confirm

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
choco install chocolatey-license --source $NugetRepositoryUrl --confirm

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco source disable --name chocolatey.licensed
} else {
    Write-Warning "Not disabling 'chocolatey.licensed' feed, as Chocolatey-License has not been installed."
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco install chocolatey.extension --source $NugetRepositoryUrl --confirm
} else {
    Write-Warning "Not installing 'chocolatey.extension', as Chocolatey-License has not been installed."
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
choco feature disable --name showNonElevatedWarnings
choco feature enable --name useBackgroundService
choco feature enable --name useBackgroundServiceWithNonAdministratorsOnly
choco feature enable --name allowBackgroundServiceUninstallsFromUserInstallsOnly
choco config set --name allowedBackgroundServiceCommands --value "install,upgrade,uninstall"

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if ($ChocolateyCentralManagementUrl) {
    choco install chocolatey-agent --source $NugetRepositoryUrl --confirm
    choco config set --name CentralManagementServiceUrl --value $ChocolateyCentralManagementUrl
    if ($ChocolateyCentralManagementClientSalt) {
        choco config set --name centralManagementClientCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementClientSalt
    }
    if ($ChocolateyCentralManagementServiceSalt) {
        choco config set --name centralManagementServiceCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementServiceSalt
    }
    choco feature enable --name useChocolateyCentralManagement
    choco feature enable --name useChocolateyCentralManagementDeployments
}

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. chocolatey.chocolatey
##### You will require the chocolatey.chocolatey collection to be installed
##### on all machines using this playbook.
##### Please see https://github.com/chocolatey/chocolatey-ansible/#installing-the-collection-from-ansible-galaxy

- name: Install and Configure Chocolatey
  hosts: all

## 2. TOP LEVEL VARIABLES ##
  vars:

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
    nuget_repository_url: INTERNAL REPO URL

### b. Internal Repository Credential ###
#### If required, add the repository access credential here and
#### uncomment lines with source_username and source_password below
#    nuget_repository_username: username
#    nuget_repository_password: password

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#    chocolatey_central_management_url: https://chocolatey-central-management:24020/ChocolateyManagementService

#### ii. If using a Client Salt, add it here
#    chocolatey_central_management_client_salt: clientsalt

#### iii. If using a Service Salt, add it here
#    chocolatey_central_management_service_salt: servicesalt

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

  tasks:
  - name: Install chocolatey
    win_chocolatey:
      name: chocolatey
      source: ""{{ nuget_repository_url }}""
      # source_username: ""{{ nuget_repository_username }}""
      # source_password: ""{{ nuget_repository_password }}""

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#   - name: Enable FIPS compliance
#     win_chocolatey_feature:
#       name: useFipsCompliantChecksums
#       state: enabled

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
  - name: Set the cache location
    win_chocolatey_config:
      name: cacheLocation
      state: present
      value: C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
  - name: Set the command execution timeout
    win_chocolatey_config:
      name: commandExecutionTimeoutSeconds
      state: present
      value: 14400

#### Turn off download progress when running choco through integrations
  - name: Disable showing download progress
    win_chocolatey_feature:
      name: showDownloadProgress
      state: disabled

### c. Sources ###
#### Remove the default community package repository source
  - name: Remove Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey
      state: absent

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here
#### NOTE: This EXAMPLE may require changes
  - name: Add Internal Repository
    win_chocolatey_source:
      name: ChocolateyInternal
      state: present
      source: {{ nuget_repository_url }}
      # source_username: {{ nuget_repository_username }}
      # source_password: {{ nuget_repository_password }}
      priority: 1

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
  - name: Upgrade Chocolatey
    win_chocolatey:
      name: chocolatey
      state: latest

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.
### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
  - name: Install Chocolatey License
    win_chocolatey:
      name: chocolatey-license
      source: ChocolateyInternal
      state: latest

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
  - name: Disable Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey.licensed
      state: disabled

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
  - name: Install Chocolatey Extension
    win_chocolatey:
      name: chocolatey.extension
      source: ChocolateyInternal
      state: latest

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
  - name: Hide not-elevated warnings
    win_chocolatey_feature:
      name: showNonElevatedWarnings
      state: disabled

  - name: Use background mode for self-service
    win_chocolatey_feature:
      name: useBackgroundService
      state: enabled

  - name: Use background service for non-admins
    win_chocolatey_feature:
      name: useBackgroundServiceWithNonAdministratorsOnly
      state: enabled

  - name: Allow background uninstallation for user installs
    win_chocolatey_feature:
      name: allowBackgroundServiceUninstallsFromUserInstallsOnly
      state: enabled

  - name: Set allowed background service commands
    win_chocolatey_config:
      name: backgroundServiceAllowedCommands
      state: present
      value: install,upgrade,uninstall

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
  - name: Install Chocolatey Agent
    when: chocolatey_central_management_url is defined
    win_chocolatey:
      name: chocolatey-agent
      source: ChocolateyInternal
      state: latest

  - name: Set the Central Management Service URL
    when: chocolatey_central_management_url is defined
    win_chocolatey_config:
      name: CentralManagementServiceUrl
      state: present
      value: {{ chocolatey_central_management_url }}

  - name: Set the Central Management Client Salt
    when: chocolatey_central_management_client_salt is defined
    win_chocolatey_config:
      name: centralManagementClientCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_client_salt }}

  - name: Set the Central Management Service Salt
    when: chocolatey_central_management_service_salt is defined
    win_chocolatey_config:
      name: centralManagementServiceCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_service_salt }}

  - name: Use Central Management
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagement
      state: enabled

  - name: Use Central Management Deployments
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagementDeployments
      state: enabled

See docs at https://docs.chef.io/resource_chocolatey_package.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### The Chocolatey resources are available with any recent version of Chef.
#### We utilise the Chocolatey recipe to install the Chocolatey binaries.
include_recipe "chocolatey"

## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# NugetRepositoryUsername = "username"
# NugetRepositoryPassword = "password"

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
ChocolateyNupkgUrl = "INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg",

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
node['chocolatey']['install vars'] = {
  'chocolateyDownloadUrl' => "#{ChocolateyNupkgUrl}",
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# chocolatey_feature 'useFipsCompliantChecksums' do
#   action :enable
# end

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolatey_config 'cacheLocation' do
  value 'C:\ProgramData\chocolatey\cache'
end

#### Increase timeout to at least 4 hours
chocolatey_config 'commandExecutionTimeoutSeconds' do
  value '14400'
end

#### Turn off download progress when running choco through integrations
chocolatey_feature 'showDownloadProgress' do
  action :disable
end

### c. Sources ###
#### Remove the default community package repository source
chocolatey_source 'chocolatey' do
  action :remove
end

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
chocolatey_source 'ChocolateyInternal' do
  source "#{NugetRepositoryUrl}"
  priority 1
  action   :add
end

execute 'ChocolateyInternal' do
  command "choco source add --name ChocolateyInternal -s #{NugetRepositoryUrl} -u=#{NugetRepositoryUsername} -p=#{NugetRepositoryPassword} --priority=1"
  only_if { NugetRepositoryUsername != nil || NugetRepositoryPassword != nil }
end

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
chocolatey_package 'chocolatey' do
  action :upgrade
  source "#{NugetRepositoryUrl}"
end

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
chocolatey_package 'chocolatey-license' do
  action :install
  source "#{NugetRepositoryUrl}"
end

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
chocolatey_source 'chocolatey.licensed' do
  action            :disable
end

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
chocolatey_package 'chocolatey.extention' do
  action     install
  source     "#{NugetRepositoryUrl}"
end

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolatey_feature 'showNonElevatedWarnings' do
  action :disable
end

chocolatey_feature 'useBackgroundService' do
  action :enable
end

chocolatey_feature 'useBackgroundServiceWithNonAdministratorsOnly' do
  action :enable
end

chocolatey_feature 'allowBackgroundServiceUninstallsFromUserInstallsOnly' do
  action :enable
end

chocolatey_config 'backgroundServiceAllowedCommands' do
  value 'install,upgrade,uninstall'
end

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
chocolatey_package 'chocolatey-agent' do
  action     install
  source     "#{NugetRepositoryUrl}"
  # user       "#{NugetRepositoryUsername}"
  # password   "#{NugetRepositoryPassword}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'CentralManagementServiceUrl' do
  value  "#{ChocolateyCentralManagementUrl}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'centralManagementClientCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementClientSalt}"
  only_if { ChocolateyCentralManagementClientSalt != nil }
end

chocolatey_config 'centralManagementServiceCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementServiceSalt}"
  only_if { ChocolateyCentralManagementServiceSalt != nil }
end

chocolatey_feature 'useChocolateyCentralManagement' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_feature 'useChocolateyCentralManagementDeployments' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.

If Applicable - Chocolatey Configuration/Installation


#requires -Modules cChoco
## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires chocolatey\cChoco DSC module to be installed on the machine compiling the DSC manifest
#### NOTE: This will need to be installed before running the DSC portion of this script
if (-not (Get-Module cChoco -ListAvailable)) {
    $null = Install-PackageProvider -Name NuGet -MinimumVersion 2.8.5.201 -Force
    if (($PSGallery = Get-PSRepository -Name PSGallery).InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy Trusted
    }
    Install-Module -Name cChoco
    if ($PSGallery.InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy $PSGallery.InstallationPolicy
    }
}

#### ii. Requires a hosted copy of the install.ps1 script
##### This should be available to download without authentication.
##### The original script can be found here: https://community.chocolatey.org/install.ps1

Configuration ChocolateyConfig {
## 2. TOP LEVEL VARIABLES ##
    param(
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
        $NugetRepositoryUrl      = "INTERNAL REPO URL",

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
        $ChocolateyNupkgUrl      = "INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg",

### c. Internal Repository Credential ###
#### If required, add the repository access credential here
#        $NugetRepositoryCredential = [PSCredential]::new(
#            "username",
#            ("password" | ConvertTo-SecureString -AsPlainText -Force)
#        ),

### d. Install.ps1 URL
#### The path to the hosted install script:
        $ChocolateyInstallPs1Url = "https://community.chocolatey.org/install.ps1"

### e. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#        $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService",

#### ii. If using a Client Salt, add it here
#        $ChocolateyCentralManagementClientSalt = "clientsalt",

#### iii. If using a Service Salt, add it here
#        $ChocolateyCentralManagementServiceSalt = "servicesalt"
    )
    Import-DscResource -ModuleName PSDesiredStateConfiguration
    Import-DscResource -ModuleName cChoco

    Node 'localhost' {
## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
        Environment chocoDownloadUrl {
            Name  = "chocolateyDownloadUrl"
            Value = $ChocolateyNupkgUrl
        }

        cChocoInstaller installChocolatey {
            DependsOn = "[Environment]chocoDownloadUrl"
            InstallDir = Join-Path $env:ProgramData "chocolatey"
            ChocoInstallScriptUrl = $ChocolateyInstallPs1Url
        }

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#        cChocoFeature featureFipsCompliance {
#            FeatureName = "useFipsCompliantChecksums"
#        }

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
        cChocoConfig cacheLocation {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "cacheLocation"
            Value      = "C:\ProgramData\chocolatey\cache"
        }

#### Increase timeout to at least 4 hours
        cChocoConfig commandExecutionTimeoutSeconds {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "commandExecutionTimeoutSeconds"
            Value      = 14400
        }

#### Turn off download progress when running choco through integrations
        cChocoFeature showDownloadProgress {
            DependsOn   = "[cChocoInstaller]installChocolatey"
            FeatureName = "showDownloadProgress"
            Ensure      = "Absent"
        }

### c. Sources ###
#### Remove the default community package repository source
        cChocoSource removeCommunityRepository {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name       = "chocolatey"
            Ensure     = "Absent"
        }

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here.
#### NOTE: This EXAMPLE may require changes
        cChocoSource addInternalSource {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name        = "ChocolateyInternal"
            Source      = $NugetRepositoryUrl
            Credentials = $NugetRepositoryCredential
            Priority    = 1
        }

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
        cChocoPackageInstaller updateChocolatey {
            DependsOn   = "[cChocoSource]addInternalSource", "[cChocoSource]removeCommunityRepository"
            Name        = "chocolatey"
            AutoUpgrade = $true
        }

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
        cChocoPackageInstaller chocolateyLicense {
            DependsOn = "[cChocoPackageInstaller]updateChocolatey"
            Name      = "chocolatey-license"
        }

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
        Script disableLicensedSource {
            DependsOn  = "[cChocoPackageInstaller]chocolateyLicense"
            GetScript  = {
                $Source = choco source list --limitoutput | `
                    ConvertFrom-Csv -Delimiter '|' -Header Name, Source, Disabled | `
                    Where-Object Name -eq "chocolatey.licensed"

                return @{
                    Result = if ($Source) {
                        [bool]::Parse($Source.Disabled)
                    } else {
                        Write-Warning "Source 'chocolatey.licensed' was not present."
                        $true  # Source does not need disabling
                    }
                }
            }
            SetScript  = {
                $null = choco source disable --name "chocolatey.licensed"
            }
            TestScript = {
                $State = [ScriptBlock]::Create($GetScript).Invoke()
                return $State.Result
            }
        }

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
        cChocoPackageInstaller chocolateyLicensedExtension {
            DependsOn = "[Script]disableLicensedSource"
            Name      = "chocolatey.extension"
        }

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
        cChocoFeature hideElevatedWarnings {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "showNonElevatedWarnings"
            Ensure      = "Absent"
        }

        cChocoFeature useBackgroundService {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundService"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceWithNonAdmins {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundServiceWithNonAdministratorsOnly"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceUninstallsForUserInstalls {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "allowBackgroundServiceUninstallsFromUserInstallsOnly"
            Ensure      = "Present"
        }

        cChocoConfig allowedBackgroundServiceCommands {
            DependsOn   = "[cChocoFeature]useBackgroundService"
            ConfigName = "backgroundServiceAllowedCommands"
            Value       = "install,upgrade,uninstall"
        }

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
        if ($ChocolateyCentralManagementUrl) {
            cChocoPackageInstaller chocolateyAgent {
                DependsOn = "[cChocoPackageInstaller]chocolateyLicensedExtension"
                Name      = "chocolatey-agent"
            }

            cChocoConfig centralManagementServiceUrl {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                ConfigName = "CentralManagementServiceUrl"
                Value       = $ChocolateyCentralManagementUrl
            }

            if ($ChocolateyCentralManagementClientSalt) {
                cChocoConfig centralManagementClientSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementClientCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementClientSalt
                }
            }

            if ($ChocolateyCentralManagementServiceSalt) {
                cChocoConfig centralManagementServiceSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementServiceCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementServiceSalt
                }
            }

            cChocoFeature useCentralManagement {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagement"
                Ensure      = "Present"
            }

            cChocoFeature useCentralManagementDeployments {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagementDeployments"
                Ensure      = "Present"
            }
        }
    }
}

# If working this into an existing configuration with a good method for
$ConfigData = @{
    AllNodes = @(
        @{
            NodeName                    = "localhost"
            PSDscAllowPlainTextPassword = $true
        }
    )
}

try {
    Push-Location $env:Temp
    $Config = ChocolateyConfig -ConfigurationData $ConfigData
    Start-DscConfiguration -Path $Config.PSParentPath -Wait -Verbose -Force
} finally {
    Pop-Location
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires puppetlabs/chocolatey module
####  See https://forge.puppet.com/puppetlabs/chocolatey


## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$_repository_url = 'INTERNAL REPO URL'

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
$_choco_download_url = 'INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg'

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $_chocolatey_central_management_url = 'https://chocolatey-central-management:24020/ChocolateyManagementService'

#### ii. If using a Client Salt, add it here
# $_chocolatey_central_management_client_salt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $_chocolatey_central_management_service_salt = 'servicesalt'


## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
### Note: `chocolatey_download_url is completely different than normal
###  source locations. This is directly to the bare download url for the
###  chocolatey.nupkg, similar to what you see when you browse to
###  https://community.chocolatey.org/api/v2/package/chocolatey
class {'chocolatey':
  chocolatey_download_url => $_choco_download_url,
  use_7zip                => false,
}


## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations

#chocolateyfeature {'useFipsCompliantChecksums':
#  ensure => enabled,
#}

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolateyconfig {'cacheLocation':
  value => 'C:\ProgramData\chocolatey\cache',
}

#### Increase timeout to at least 4 hours
chocolateyconfig {'commandExecutionTimeoutSeconds':
  value => '14400',
}

#### Turn off download progress when running choco through integrations
chocolateyfeature {'showDownloadProgress':
  ensure => disabled,
}

### c. Sources ###
#### Remove the default community package repository source
chocolateysource {'chocolatey':
  ensure   => absent,
  location => 'https://community.chocolatey.org/api/v2/',
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE requires changes
chocolateysource {'internal_chocolatey':
  ensure             => present,
  location           => $_repository_url,
  priority           => 1,
  username           => 'optional',
  password           => 'optional,not ensured',
  bypass_proxy       => true,
  admin_only         => false,
  allow_self_service => false,
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/

package {'chocolatey':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}


## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/guides/organizations/organizational-deployment-guide#exercise-4-create-a-package-for-the-license

# TODO: Add resource for installing/ensuring the chocolatey-license package
package {'chocolatey-license':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
## Disabled sources still need all other attributes until
## https://tickets.puppetlabs.com/browse/MODULES-4449 is resolved.
## Password is necessary with user, but not ensurable, so it should not
## matter what it is set to here. If you ever do get into trouble here,
## the password is your license GUID.
chocolateysource {'chocolatey.licensed':
  ensure   => disabled,
  priority => '10',
  user     => 'customer',
  password => '1234',
  require  => Package['chocolatey-license'],
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
package {'chocolatey.extension':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
  require  => Package['chocolatey-license'],
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolateyfeature {'showNonElevatedWarnings':
  ensure => disabled,
}

chocolateyfeature {'useBackgroundService':
  ensure => enabled,
}

chocolateyfeature {'useBackgroundServiceWithNonAdministratorsOnly':
  ensure => enabled,
}

chocolateyfeature {'allowBackgroundServiceUninstallsFromUserInstallsOnly':
  ensure => enabled,
}

chocolateyconfig {'backgroundServiceAllowedCommands':
  value => 'install,upgrade,uninstall',
}

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if $_chocolatey_central_management_url {
  package {'chocolatey-agent':
    ensure   => latest,
    provider => chocolatey,
    source   => $_repository_url,
    require  => Package['chocolatey-license'],
  }

  chocolateyconfig {'CentralManagementServiceUrl':
    value   => $_chocolatey_central_management_url,
  }

  if $_chocolatey_central_management_client_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  if $_chocolatey_central_management_service_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  chocolateyfeature {'useChocolateyCentralManagement':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }

  chocolateyfeature {'useChocolateyCentralManagementDeployments':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }
}

Need Help? View our docs or file an issue.

There is already a version of this package in your Script Builder

Current Version	New Version

Downloads:

32,301

Downloads of v 2.0.0.20230301-alpha9:

96

Last Update:

03 Jan 2023

Package Maintainer(s):

Software Author(s):

SEEK Ltd.

Tags:

admin dsc

SEEK DSC Networking

This is a prerelease version of SEEK DSC Networking.

2.0.0.20230301-alpha9 | Updated: 03 Jan 2023

Downloads:

32,301

Downloads of v 2.0.0.20230301-alpha9:

Maintainer(s):

Software Author(s):

SEEK Ltd.

Tags:

admin dsc

SEEK DSC Networking 2.0.0.20230301-alpha9

This is a prerelease version of SEEK DSC Networking.

Legal Disclaimer: Neither this package nor Chocolatey Software, Inc. are affiliated with or endorsed by SEEK Ltd. The inclusion of SEEK Ltd. trademark(s), if any, upon this webpage is solely to identify SEEK Ltd. goods or services and not for commercial purposes.

Some Checks Have Failed or Are Not Yet Complete

Not All Tests Have Passed

Hide Checks

Validation Testing Failed

Verification Testing Passed

Details

Scan Testing Successful:

No detections found in any package files

Details

Learn More

Deployment Method: Individual Install, Upgrade, & Uninstall

To install SEEK DSC Networking, run the following command from the command line or from PowerShell:

To upgrade SEEK DSC Networking, run the following command from the command line or from PowerShell:

To uninstall SEEK DSC Networking, run the following command from the command line or from PowerShell:

NOTE

This applies to both open source and commercial editions of Chocolatey.

1. Enter Your Internal Repository Url

(this should look similar to https://community.chocolatey.org/api/v2/)

2. Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the package and push it to a repository Download

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the package:
  Download
- Follow manual internalization instructions

Package Internalizer (C4B)

Run: (additional options)

choco download seek-dsc-networking --internalize --pre --source=https://community.chocolatey.org/api/v2/

For package and dependencies run:

choco push --source="'INTERNAL REPO URL'"

Automate package internalization

3. Copy Your Script

choco upgrade seek-dsc-networking -y --source="'INTERNAL REPO URL'" --prerelease [other options]

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:


choco upgrade seek-dsc-networking -y --source="'INTERNAL REPO URL'" --prerelease
$exitCode = $LASTEXITCODE

Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
  Exit 0
}

Exit $exitCode


- name: Install seek-dsc-networking
  win_chocolatey:
    name: seek-dsc-networking
    version: '2.0.0.20230301-alpha9'
    source: INTERNAL REPO URL
    state: present
    allow_prerelease: yes

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.


chocolatey_package 'seek-dsc-networking' do
  action    :install
  source   'INTERNAL REPO URL'
  version  '2.0.0.20230301-alpha9'
  options  '--prerelease'
end

See docs at https://docs.chef.io/resource_chocolatey_package.html.


cChocoPackageInstaller seek-dsc-networking
{
    Name        = "seek-dsc-networking"
    Version     = "2.0.0.20230301-alpha9"
    Source      = "INTERNAL REPO URL"
    chocoParams = "--prerelease"
}

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.


package { 'seek-dsc-networking':
  ensure          => '2.0.0.20230301-alpha9',
  install_options => ['--prerelease'],
  provider        => 'chocolatey',
  source          => 'INTERNAL REPO URL',
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

4. If applicable - Chocolatey configuration/installation

See infrastructure management matrix for Chocolatey configuration elements and examples.

WARNING

This package is exempt from moderation. While it is likely safe for you, there is more risk involved.

Description

Custom DSC Resources for networking administration

Files

tools\chocolateyUninstall.ps1

try
{
	$DSCResourcesRoot = Join-Path $env:ProgramFiles "WindowsPowerShell\Modules"
	$DSCResourceTarget = Join-Path $env:chocolateyPackageFolder "lib"
	Get-ChildItem $DSCResourceTarget | Foreach-Object { cmd /c rmdir "$DSCResourcesRoot\$_" }
} catch {
    throw $_.Exception
}

tools\chocolateyInstall.ps1

try
{
	$DSCResourcesRoot = Join-Path $env:ProgramFiles "WindowsPowerShell\Modules"
	$DSCResourceTarget = Join-Path $env:chocolateyPackageFolder "lib"

	# remove DSC resources that may have been manually installed
	if (Test-Path "$DSCResourcesRoot\SEEK - Modules") {
		cmd /c rmdir "$DSCResourcesRoot\SEEK - Modules"
	}

	
	Get-ChildItem $DSCResourceTarget | Foreach-Object {
		if (Test-Path "$DSCResourcesRoot\$_") {
			# remove previous installation of this package
			cmd /c rmdir "$DSCResourcesRoot\$_"
		}
		cmd /c mklink /j "$DSCResourcesRoot\$_" "$DSCResourceTarget\$_"
		Get-ChildItem -Path "$DSCResourcesRoot\$_" -File -Recurse | Unblock-File
	}

} catch {
	$host.SetShouldExit(1)
	throw $_.Exception
}

lib\cNetworking\cNetworking.psd1

@{
# Version number of this module.
ModuleVersion = '2.0.0-alpha9'

# ID used to uniquely identify this module
GUID = '6dd79cc0-a617-4b81-8281-ace0721e1f53'

# Author of this module
Author = 'SEEK Ltd.'

# Company or vendor of this module
CompanyName = 'SEEK Ltd.'

# Copyright statement for this module
Copyright = '(c) 2015 SEEK Ltd. All rights reserved.'

# Description of the functionality provided by this module
Description = 'Custom DSC Resources for networking administration'

# Minimum version of the Windows PowerShell engine required by this module
PowerShellVersion = '4.0'

# Minimum version of the common language runtime (CLR) required by this module
CLRVersion = '4.0'

# Functions to export from this module
FunctionsToExport = '*'

# Cmdlets to export from this module
CmdletsToExport = '*'
}

lib\cNetworking\DSCResources\SEEK_cStaticIpAddress\SEEK_cStaticIpAddress.psm1

# NOTE: Supports IPv4 addresses only

function Get-TargetResource
{
    [CmdletBinding()]
    [OutputType([System.Collections.Hashtable])]
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [System.String]$IpAddress
    )


    $networkAdapterConfiguration = Get-NetworkAdapterConfigurationByIpAddress $IpAddress

    if ($networkAdapterConfiguration -eq $null)
    {
        return @{
            IpAddress = $IpAddress
            Interface = $null
            SubnetMask = $null
            DHCPEnabled = $null
            Ensure = "Absent"
        }
    }

    $networkAdapter = Get-NetworkAdapterByIndex $networkAdapterConfiguration.Index
    $ipAddressList = $networkAdapterConfiguration.IPAddress | Where-IPv4Address
    $ipSubnetList = $networkAdapterConfiguration.IPSubnet | Where-IPv4Subnet
    $ipAddressIndex = $ipAddressList.IndexOf($IpAddress)

    return @{
        IpAddress = $IpAddress
        Interface = $networkAdapter.NetConnectionID
        SubnetMask = @($ipSubnetList)[$ipAddressIndex]
        DHCPEnabled = $networkAdapterConfiguration.DHCPEnabled
        Ensure = "Present"
    }
}

function Set-TargetResource
{
    [CmdletBinding()]
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [System.String]$IpAddress,

        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [System.String]$Interface,

        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [System.String]$SubnetMask,

        [ValidateSet("Present","Absent")]
        [System.String]
        $Ensure  = "Present"
    )

    if(!([System.Net.Ipaddress]::TryParse($IpAddress, [ref]0))) { throw "IP Address ""$IpAddress"" is invalid"}
    if(!([System.Net.Ipaddress]::TryParse($SubnetMask, [ref]0))) { throw "SubnetMask ""$SubnetMask"" is invalid"}

    if ($Ensure -eq "Absent")
    {
        Remove-IpAddress -IpAddress $IpAddress -Interface $Interface
    }
    else
    {
        Add-IpAddress -IpAddress $IpAddress -Interface $Interface -SubnetMask $SubnetMask
    }
}

function Test-TargetResource
{
    [CmdletBinding()]
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [System.String]$IpAddress,

        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [System.String]$Interface,

        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [System.String]$SubnetMask,

        [ValidateSet("Present","Absent")]
        [System.String]
        $Ensure  = "Present"
    )

    $existingIpAddress = Get-TargetResource $IpAddress

    if ($Ensure -eq "Present" -and `
        $existingIpAddress -ne $null -and `
        $existingIpAddress.Interface -eq $Interface -and `
        $existingIpAddress.SubnetMask -eq $SubnetMask -and `
        $existingIpAddress.Ensure -eq $Ensure -and `
        $existingIpAddress.DHCPEnabled -eq $false)
    {
        return $true
    }
    elseif ($Ensure -eq "Absent" -and `
        $existingIpAddress.Ensure -eq $Ensure)
    {
        return $true
    }

    return $false
}

function Add-IpAddress
{
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [System.String]$IpAddress,

        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [System.String]$Interface,

        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [System.String]$SubnetMask
    )

    $networkAdapterConfiguration = Get-NetworkAdapterConfigurationByInterface $Interface

    if (Test-IpAddressBound -IpAddress $IpAddress -Index $networkAdapterConfiguration.Index -SubnetMask $SubnetMask) { return }

    if (Test-IpAddressBound $IpAddress)
    {
        Remove-IpAddress -IpAddress $IpAddress
    }

    $ipAddressList = $networkAdapterConfiguration.IPAddress + @($IpAddress) | Where-IPv4Address
    $ipSubnetList = $networkAdapterConfiguration.IPSubnet + @($SubnetMask) | Where-IPv4Subnet

    Enable-Static -NetworkAdapterConfiguration $networkAdapterConfiguration `
        -IpAddresses $ipAddressList `
        -IpSubnets $ipSubnetList
}

function Remove-IpAddress
{
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [System.String]$IpAddress,

        [parameter(Mandatory = $false)]
        [System.String]$Interface = $null
    )

    $networkAdapterConfiguration = $null
    if ($Interface)
    {
        $networkAdapterConfiguration = Get-NetworkAdapterConfigurationByInterface $Interface
    }
    else
    {
        $networkAdapterConfiguration = Get-NetworkAdapterConfigurationByIpAddress $IpAddress
    }

    $ipAddressList = [System.Collections.ArrayList]@($networkAdapterConfiguration.IPAddress | Where-IPv4Address)
    $ipSubnetList = [System.Collections.ArrayList]@($networkAdapterConfiguration.IPSubnet | Where-IPv4Subnet)

    $ipAddressIndex = $ipAddressList.IndexOf($IpAddress)
    if ($ipAddressIndex -lt 0) {return}
    $ipAddressList.RemoveAt($ipAddressIndex)
    $ipSubnetList.RemoveAt($ipAddressIndex)

    if ($ipAddressList.Length -gt 0)
    {
        Enable-Static -NetworkAdapterConfiguration $networkAdapterConfiguration `
            -IpAddresses ([Object[]]$ipAddressList) `
            -IpSubnets ([Object[]]$ipSubnetList)
    }
    else
    {
        # Adapter is no longer bound to any IP addresses
        # Reverting adapter to DHCP
        Enable-DHCP -NetworkAdapterConfiguration $networkAdapterConfiguration
    }
}

function Where-IPv4Address
{
    [CmdletBinding()]
    param
    (
        [parameter(Mandatory = $true, ValueFromPipeline = $true)]
        [String]
        $InputObject
    )

    process
    {
        if ($InputObject -notmatch ":")
        {
            Write-Output $InputObject
        }
    }
}

function Where-IPv4Subnet
{
    [CmdletBinding()]
    param
    (
        [parameter(Mandatory = $true, ValueFromPipeline = $true)]
        [String]
        $InputObject
    )

    process
    {
        if ($InputObject -match "\d+\.\d+\.\d+\.\d+")
        {
            Write-Output $InputObject
        }
    }
}

function Get-NetworkAdapterByIndex
{
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [Int32]$Index
    )

    $networkAdapter = Get-WmiObject Win32_NetworkAdapter | ? {$_.Index -eq $Index}
    $results = $networkAdapter | measure
    if ($results.count -le 0)
    {
        throw "Could not find a network adapter with index ""$Index"""
    }
    elseif ($results.count -gt 1)
    {
        $matchingAdapters = ($networkAdapter | % Path) -join ", "
        throw "Multiple network adapters match the index ""$Index"" {$matchingAdapters}"
    }

    return ($networkAdapter | Select-Object -First 1)
}

function Get-NetworkAdapterByInterface
{
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [System.String]$Interface
    )



    $networkAdapter = Get-WmiObject Win32_NetworkAdapter | ? {$_.NetConnectionID -eq $Interface}
    $results = $networkAdapter | measure
    if ($results.count -le 0)
    {
        throw "Could not find a network adapter matching ""$Interface"""
    }
    elseif ($results.count -gt 1)
    {
        $matchingAdapters = ($networkAdapter | % Path) -join ", "
        throw "Multiple network adapters match the interface ""$Interface"" {$matchingAdapters}"
    }


    return ($networkAdapter | Select-Object -First 1)
}

function Get-NetworkAdapterConfigurationByInterface
{
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [System.String]$Interface
    )

    $networkAdapter = Get-NetworkAdapterByInterface $Interface
    return (Get-WmiObject Win32_NetworkAdapterConfiguration | ? {$_.Index -eq $networkAdapter.Index} | Select-Object -First 1)
}

function Get-NetworkAdapterConfigurationByIpAddress
{
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [System.String]$IpAddress
    )

    $networkAdapterConfiguration = Get-WmiObject Win32_NetworkAdapterConfiguration | ? {$_.IPAddress -contains $IpAddress}

    $results = $networkAdapterConfiguration | measure
    if ($results.count -gt 1)
    {
        $matchingAdapters = ($networkAdapterConfiguration | % Path) -join ", "
        throw "IP Address ""$IpAddress"" is bound to multiple network adapters {$matchingAdapters}"
    }

    return ($networkAdapterConfiguration | Select-Object -First 1)
}

function Test-IpAddressBound
{
    [OutputType([Boolean])]
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [System.String]$IpAddress,

        [parameter(Mandatory = $false)]
        [ValidateNotNullOrEmpty()]
        [Int32]$Index,

        [parameter(Mandatory = $false)]
        [ValidateNotNullOrEmpty()]
        [System.String]$SubnetMask
    )

    $networkAdapterConfiguration = Get-WmiObject Win32_NetworkAdapterConfiguration | ? {$_.IPAddress -contains $IpAddress}

    if ($Index)
    {
        $networkAdapterConfiguration = $networkAdapterConfiguration | ? {$_.Index -eq $Index}
    }

    if ($SubnetMask)
    {
        $networkAdapterConfiguration = $networkAdapterConfiguration | ? {$_.IPSubnet[$_.IPAddress.IndexOf($IpAddress)] -eq $SubnetMask}
    }

    $results = $networkAdapterConfiguration | measure

    if ($results.count -le 0) { return $false } else { return $true }
}

function Enable-Static
{
    [CmdletBinding()]
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [System.String[]]$IpAddresses,

        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [System.String[]]$IpSubnets,

        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [Object]$NetworkAdapterConfiguration
    )

    $result = $NetworkAdapterConfiguration.EnableStatic($IpAddresses, $IpSubnets)
    if ($result.ReturnValue -ne 0) { throw "Failed to enable static IP addresses on network adapter with index ""$($NetworkAdapterConfiguration.Index)"" {$($IpAddresses -join ", ")}"}
}

function Enable-DHCP
{
    [CmdletBinding()]
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [Object]$NetworkAdapterConfiguration
    )

    $result = $NetworkAdapterConfiguration.EnableDHCP()
    if ($result.ReturnValue -ne 0) { throw "Failed to enable DHCP on network adapter with index ""$($NetworkAdapterConfiguration.Index)"""}
}

Export-ModuleMember -function Get-TargetResource, Set-TargetResource, Test-TargetResource

lib\cNetworking\DSCResources\SEEK_cStaticIpAddress\SEEK_cStaticIpAddress.schema.mof

lib\cNetworking\DSCResources\SEEK_cCertReq\SEEK_cCertReq.psm1

<# NOTE: This SSL certificate request module is designed for Local Dev machines ONLY !!! #>

<#
Retrieves a SSL certificate for a Subject located on machine
#>

function Get-TargetResource
{
    [CmdletBinding()]
    [OutputType([System.Collections.Hashtable])]
    param
    (
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [String]$Subject,

        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [String]$CertPath
    )

    Write-Verbose "Getting CERT"

    $theCert = Get-ChildItem -path $CertPath | Where-Object {$_.Subject -eq $Subject}

    #find the certificate and return
    $certResult = @{
        Subject = $Cert.Subject
        Ensure = "Present"
        SANs = $Cert.DnsNameList
        OnlineCA = $Cert.Issuer
    }

    return $certResult
}

<#
Creates a SSL certificate for a Subject on machine if Present is ensured.
Removes SSL certificate for a Subject on machine if Absent is ensured.
#>
function Set-TargetResource
{
    [CmdletBinding()]
    param
    (
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [String]$Subject,

        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [String]$CertPath,

        [ValidateSet("Present", "Absent")]
        [string]$Ensure = "Present",

        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [String[]]$SANs,

        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [String]$OnlineCA
    )

    Write-Verbose "Setting CERT"

    if($Ensure -eq "Present")
    {
        Write-Verbose "Creating CERT for $Subject"

        #call certreq
        $subjectDomain = $Subject.split(',')[0].split('=')[1]
        if ($subjectDomain -match "\*.") {
            $subjectDomain = $subjectDomain -replace "\*", "star"
        }
        $CertificateINI = "$subjectDomain.ini"
        $CertificateREQ = "$subjectDomain.req"
        $CertificateRSP = "$subjectDomain.rsp"
        $CertificateCER = "$subjectDomain.cer"

        ### INI file generation
        new-item -type file $CertificateINI -force
        add-content $CertificateINI '[Version]'
        add-content $CertificateINI 'Signature="$Windows NT$"'
        add-content $CertificateINI ''
        add-content $CertificateINI '[NewRequest]'
        $temp = 'Subject="' + $Subject + '"'
        add-content $CertificateINI $temp
        add-content $CertificateINI 'Exportable=TRUE'
        add-content $CertificateINI 'KeyLength=2048'
        add-content $CertificateINI 'KeySpec=1'
        add-content $CertificateINI 'KeyUsage=0xA0'
        add-content $CertificateINI 'MachineKeySet=True'
        add-content $CertificateINI 'ProviderName="Microsoft RSA SChannel Cryptographic Provider"'
        add-content $CertificateINI 'ProviderType=12'
        add-content $CertificateINI 'RequestType=CMC'
        add-content $CertificateINI ''
        add-content $CertificateINI '[RequestAttributes]'
        add-content $CertificateINI 'CertificateTemplate="WebServer"'
        add-content $CertificateINI ''
        add-content $CertificateINI '[EnhancedKeyUsageExtension]'
        add-content $CertificateINI 'OID=1.3.6.1.5.5.7.3.1'
        add-content $CertificateINI ''

        if ($SANs) {
            add-content $CertificateINI '[Extensions]'
            add-content $CertificateINI '2.5.29.17 = "{text}"'

            foreach ($SAN in $SANs) {
                $temp = '_continue_ = "dns=' + $SAN + '&"'
                add-content $CertificateINI $temp
            }
        }

        try
        {
            ### Certificate request generation
            if (test-path $CertificateREQ)     {
                del $CertificateREQ
            }

            Write-Verbose "Converting $CertificateINI to CSR: certreq -new $CertificateINI $CertificateREQ"
            certreq -new $CertificateINI $CertificateREQ

            ### Online certificate request and import
            if ($OnlineCA) {
                if (test-path $CertificateCER) {del $CertificateCER}
                if (test-path $CertificateRSP) {del $CertificateRSP}

                Write-Verbose "Submitting: certreq -submit -config $OnlineCA $CertificateREQ $CertificateCER"
                certreq -submit -config $OnlineCA $CertificateREQ $CertificateCER


                Write-Verbose "Merging certificate response file and CSR together to generate SSL certificate: certreq -accept -config $OnlineCA $CertificateCER"
                certreq -accept -config $OnlineCA $CertificateCER
            }

            Write-Verbose "Finished creating CERT for $Subject"
        }
        catch
        {
            $errorId = "CertReqFailure";
            $errorCategory = [System.Management.Automation.ErrorCategory]::InvalidOperation;
            $errorMessage = "CertGenerationFailure -f ${Name}";
            $exception = New-Object System.InvalidOperationException $errorMessage ;
            $errorRecord = New-Object System.Management.Automation.ErrorRecord $exception, $errorId, $errorCategory, $null

            $PSCmdlet.ThrowTerminatingError($errorRecord)
        }

        Test-TargetResource $Subject $CertPath $Ensure $SANs $OnlineCA
    }
    else
    {
        Write-Verbose "Removing CERT for $Subject"
        $theCert = Get-ChildItem -path $CertPath | Where-Object {$_.Subject -eq $Subject}

        if ($theCert -ne $null)
        {
            $Thumbprint = $theCert.Thumbprint
            Remove-Item -Path "$CertPath\$Thumbprint"

            Write-Verbose "Successfully removed CERT for $Subject"
        }
    }
}

<#
Tests a SSL certificate for a Subject IS located on machine if Present is ensured.
Tests a SSL certificate for a Subject IS NOT located on machine if Absent is ensured.
#>
function Test-TargetResource
{
    [CmdletBinding()]
    [OutputType([System.Boolean])]
    param
    (
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [String]$Subject,

        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [String]$CertPath,

        [ValidateSet("Present", "Absent")]
        [string]$Ensure = "Present",

        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [String[]]$SANs,

        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [String]$OnlineCA
    )

    Write-Verbose "Testing CERT"
    #test that the cert is there
    $theCert = Get-ChildItem -path $CertPath | Where-Object {$_.Subject -eq $Subject}

    if ($theCert -ne $null -and $Ensure -eq "Present")
    {
        Write-Verbose "CERT Thumbprint is $theCert"
        Write-Verbose "CERT is expected to be Present and is Present"
        return $true
    }

    if ($theCert -eq $null -and $Ensure -eq "Absent")
    {
        Write-Verbose "CERT is expected to be Absent and is Absent"
        return $true
    }

    return $false
}


#  FUNCTIONS TO BE EXPORTED
Export-ModuleMember -function Get-TargetResource, Set-TargetResource, Test-TargetResource

lib\cNetworking\DSCResources\SEEK_cCertReq\SEEK_cCertReq.schema.mof

lib\cNetworking\DSCResources\SEEK_cFirewallRule\SEEK_cFirewallRule.schema.mof

lib\cNetworking\DSCResources\SEEK_cFirewallRule\SEEK_cFirewallRule.psm1

function Get-TargetResource
{
    [CmdletBinding()]
    [OutputType([System.Collections.Hashtable])]
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [System.String]$Name
    )


    try
    {
        $advFirewallOutput = (Invoke-NetshAdvFirewall -Name $Name -Operation "show")
        $firewallRuleExists = $advFirewallOutput -match "Rule Name:\s+$Name\s+"
    }
    catch
    {
        $firewallRuleExists = $false
    }

    if (-not $firewallRuleExists)
    {
        return @{
            Name = $Name
            Direction = $null
            LocalPort = $null
            Protocol = $null
            Action = $null
            Ensure = "Absent"
        }
    }

    if ($advFirewallOutput -match "Direction:\s+(.+?)\s+")
    {
        $direction = switch ($Matches[1])
        {
            "in" {"Inbound"}
            "out" {"Outbound"}
        }
    }
    if ($advFirewallOutput -match "LocalPort:\s+(.+?)\s+")
    {
        $localport = $Matches[1]
    }
    if ($advFirewallOutput -match "Protocol:\s+(.+?)\s+")
    {
        $protocol = $Matches[1]
    }
    if ($advFirewallOutput -match "Action:\s+(.+?)\s+")
    {
        $action = $Matches[1]
    }

    return @{
        Name = $Name
        Direction = $direction
        LocalPort = $localPort
        Protocol = $protocol
        Action = $action
        Ensure = "Present"
    }
}

function Set-TargetResource
{
    [CmdletBinding(DefaultParameterSetName = "Absent")]
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [System.String]$Name,

        [parameter(Mandatory=$true,ParameterSetName = "Present")]
        [ValidateSet("Inbound","Outbound")]
        [System.String]$Direction,

        [parameter(Mandatory=$true,ParameterSetName = "Present")]
        [ValidateNotNullOrEmpty()]
        [System.String]$LocalPort,

        [parameter(Mandatory=$true,ParameterSetName = "Present")]
        [ValidateSet("TCP","UDP")]
        [System.String]$Protocol,

        [parameter(Mandatory=$true,ParameterSetName = "Present")]
        [ValidateSet("Allow","Block", "Bypass")]
        [System.String]$Action,

        [parameter(Mandatory=$false,ParameterSetName = "Present")]
        [parameter(Mandatory=$true,ParameterSetName = "Absent")]
        [ValidateSet("Present","Absent")]
        [System.String]
        $Ensure  = "Present"
    )

    if ($Ensure -eq "Present")
    {
        New-NetFirewallRule -Name $Name `
            -Direction $Direction `
            -LocalPort $LocalPort `
            -Protocol $Protocol `
            -Action $Action
    }
    else
    {
        Remove-NetFirewallRule -Name $Name
    }
}

function Test-TargetResource
{
    [CmdletBinding(DefaultParameterSetName = "Absent")]
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [System.String]$Name,

        [parameter(Mandatory=$true,ParameterSetName = "Present")]
        [ValidateSet("Inbound","Outbound")]
        [System.String]$Direction,

        [parameter(Mandatory=$true,ParameterSetName = "Present")]
        [ValidateNotNullOrEmpty()]
        [System.String]$LocalPort,

        [parameter(Mandatory=$true,ParameterSetName = "Present")]
        [ValidateSet("TCP","UDP")]
        [System.String]$Protocol,

        [parameter(Mandatory=$true,ParameterSetName = "Present")]
        [ValidateSet("Allow","Block", "Bypass")]
        [System.String]$Action,

        [parameter(Mandatory=$false,ParameterSetName = "Present")]
        [parameter(Mandatory=$true,ParameterSetName = "Absent")]
        [ValidateSet("Present","Absent")]
        [System.String]
        $Ensure  = "Present"
    )

    $firewallRule = Get-TargetResource -Name $Name

    if ($Ensure -eq "Absent" -and $firewallRule.Ensure -eq "Absent")
    {
        return $true
    }

    if ($Ensure -eq "Present" `
        -and $firewallRule.Ensure -eq "Present" `
        -and $firewallRule.Direction -eq $Direction `
        -and $firewallRule.LocalPort -eq $LocalPort `
        -and $firewallRule.Protocol -eq $Protocol `
        -and $firewallRule.Action -eq $Action)
    {
        return $true
    }

    return $false
}

function New-NetFirewallRule
{
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [String]$Name,

        [String]$Protocol,

        [String]$LocalPort,

        [ValidateSet("Inbound", "Outbound")]
        [String]$Direction,

        [ValidateSet("Allow", "Block", "Bypass")]
        [String]$Action
    )

    Invoke-NetshAdvFirewall -Name $Name `
        -Operation "add" `
        -Protocol $Protocol `
        -LocalPort $LocalPort `
        -Direction $Direction `
        -Action $Action
}

function Remove-NetFirewallRule
{
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [String]$Name
    )

    Invoke-NetshAdvFirewall -Name $Name -Operation "del"
}

function Invoke-NetshAdvFirewall
{
    [CmdletBinding()]
    [OutputType([System.String])]
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [String]$Name,

        [parameter(Mandatory = $true)]
        [ValidateSet("add","del","show")]
        [String]$Operation,

        [String]$Protocol,

        [String]$LocalPort,

        [ValidateSet("Inbound", "Outbound")]
        [String]$Direction,

        [ValidateSet("Allow", "Block", "Bypass")]
        [String]$Action
    )

    $argumentList = @(
        'advfirewall', 'firewall', $Operation, 'rule',
        "name=""${Name}"""
    )

    if ($Direction)
    {
        $dir = switch ($Direction)
        {
            "Inbound" {"in"}
            "Outbound" {"out"}
        }
        $argumentList += "dir=$dir"
    }

    if ($Protocol)
    {
        $argumentList += "protocol=$Protocol"
    }

    if ($LocalPort)
    {
        $argumentList += "localport=$LocalPort"
    }

    if ($Action)
    {
        $argumentList += "action=$Action"
    }

    $outputPath = "${env:TEMP}\netsh.out"
    $process = Start-Process netsh -ArgumentList $argumentList -Wait -NoNewWindow -RedirectStandardOutput $outputPath -Passthru
    if ($process.ExitCode -ne 0) { throw "Error performing operation '$Operation' for firewall rule"}
    return ((Get-Content $outputPath) -join "`n")
}

Export-ModuleMember -function Get-TargetResource, Set-TargetResource, Test-TargetResource

lib\cNetworking\DSCResources\SEEK_cIPAddress\SEEK_cIPAddress.psm1

<#######################################################################################
 #  MSDSCPack_IPAddress : DSC Resource that will set/test/get the current IP
 #  Address, by accepting values among those given in MSDSCPack_IPAddress.schema.mof
 #######################################################################################>



######################################################################################
# The Get-TargetResource cmdlet.
# This function will get the present list of IP Address DSC Resource schema variables on the system
######################################################################################
function Get-TargetResource
{
    param
    (
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [String]$IPAddress,

        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [String]$NodeName
    )

    Write-Warning "SEEK_cIPAddress resource is obsolete, please use SEEK_cStaticIpAddress"

    $returnValue = @{
    }

    $returnValue
}

######################################################################################
# The Set-TargetResource cmdlet.
# This function will set a new IP Address in the current node
######################################################################################
function Set-TargetResource
{
    param
    (
        #IP Address that has to be set
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [String]$IPAddress,

        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [String]$NodeName
    )

    Write-Warning "SEEK_cIPAddress resource is obsolete, please use SEEK_cStaticIpAddress"

    ValidateProperties @PSBoundParameters
}

######################################################################################
# The Test-TargetResource cmdlet.
# This will test if the given IP Address is among the current node's IP Address collection
######################################################################################
function Test-TargetResource
{
    param
    (
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [String]$IPAddress,

        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [String]$NodeName
    )

    Write-Warning "SEEK_cIPAddress resource is obsolete, please use SEEK_cStaticIpAddress"

    $result = ValidateProperties @PSBoundParameters

    if ($result -eq $false)
    {
        $errorId = "WebsiteBindingConflictOnStart";
        $errorCategory = [System.Management.Automation.ErrorCategory]::InvalidResult
        $errorMessage = "IPAddress $IPAddress not found..."
        $exception = New-Object System.InvalidOperationException $errorMessage
        $errorRecord = New-Object System.Management.Automation.ErrorRecord $exception, $errorId, $errorCategory, $null

        $PSCmdlet.ThrowTerminatingError($errorRecord);
    }

    $result
}


#######################################################################################
#  Helper function that validates the IP Address properties. If the switch parameter
# "Apply" is set, then it will set the properties after a test
#######################################################################################
function ValidateProperties
{
    param
    (
        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [String]$IPAddress,

        [Parameter(Mandatory)]
        [ValidateNotNullOrEmpty()]
        [String]$NodeName,

        [Switch]$Apply
    )

    $ip = $IPAddress

    if(!([System.Net.Ipaddress]::TryParse($ip, [ref]0)))
    {
       throw "IP Address *$IPAddress* is not in the correct format. Please correct the ipaddress in the configuration and try again"
    }
    try
    {
        #Write-Verbose -Message "Checking the IPAddress ..."
        $Networks = Get-WmiObject Win32_NetworkAdapterConfiguration -ComputerName $NodeName | ? {$_.IPEnabled}

        foreach($Network in $Networks)
        {
            if ($Network.IPAddress.Contains($IPAddress))
            {
                return $true
                break;
            }
        }
        Write-Verbose -Message "IPAddressFound $IPAddressFound"
        return $false
    }
    catch
    {
       Write-Verbose -Message $_
       throw "Can not set or find valid IPAddress using InterfaceAlias $InterfaceAlias and AddressFamily $AddressFamily"
    }
}



#  FUNCTIONS TO BE EXPORTED
Export-ModuleMember -function Get-TargetResource, Set-TargetResource, Test-TargetResource

lib\cNetworking\DSCResources\SEEK_cIPAddress\SEEK_cIPAddress.schema.mof

lib\cNetworking\DSCResources\SEEK_cUrlReservation\SEEK_cUrlReservation.psm1

function Get-TargetResource
{
    [CmdletBinding()]
    [OutputType([System.Collections.Hashtable])]
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [String]$Protocol = "http",

        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [String]$Hostname = "*",

        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [String]$Port
    )

    $url = Get-Url $Protocol $Hostname $Port
    $urlAclOutput = (Invoke-NetshUrlAcl -Protocol $Protocol -Operation "show" -Url $url)
    $urlReservationExists = $urlAclOutput -match "User:\s(.+?)\s"

    if (!$urlReservationExists)
    {
        return @{
            Protocol = $Protocol
            Hostname = $Hostname
            Port = $Port
            User = $null
            Ensure = "Absent"
        }
    }

    $user = $Matches[1]
    return @{
        Protocol = $Protocol
        Hostname = $Hostname
        Port = $Port
        User = $user
        Ensure = "Present"
    }
}

function Set-TargetResource
{
    [CmdletBinding(DefaultParameterSetName = "Absent")]
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [String]$Protocol = "http",

        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [String]$Hostname = "*",

        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [String]$Port,

        [parameter(Mandatory=$true,ParameterSetName = "Present")]
        [ValidateNotNullOrEmpty()]
        [String]$User,

        [parameter(Mandatory=$false,ParameterSetName = "Present")]
        [parameter(Mandatory=$true,ParameterSetName = "Absent")]
        [ValidateSet("Present","Absent")]
        [System.String]
        $Ensure  = "Present"
    )

    if ($Ensure -eq "Present")
    {
        New-UrlReservation -Protocol $Protocol -Hostname $Hostname -Port $Port -User $User
    }
    else
    {
        Remove-UrlReservation -Protocol $Protocol -Hostname $Hostname -Port $Port
    }
}

function Test-TargetResource
{
    [CmdletBinding(DefaultParameterSetName = "Absent")]
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [String]$Protocol = "http",

        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [String]$Hostname = "*",

        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [String]$Port,

        [parameter(Mandatory=$true,ParameterSetName = "Present")]
        [ValidateNotNullOrEmpty()]
        [String]$User,

        [parameter(Mandatory=$false,ParameterSetName = "Present")]
        [parameter(Mandatory=$true,ParameterSetName = "Absent")]
        [ValidateSet("Present","Absent")]
        [System.String]
        $Ensure  = "Present"
    )

    $urlReservation = Get-TargetResource -Protocol $Protocol -Hostname $Hostname -Port $Port

    if ($Ensure -eq "Absent" -and $urlReservation.Ensure -eq "Absent")
    {
        return $true
    }

    if ($Ensure -eq "Present" `
        -and $urlReservation.Ensure -eq "Present" `
        -and $urlReservation.Protocol -eq $Protocol `
        -and $urlReservation.Hostname -eq $Hostname `
        -and $urlReservation.Port -eq $Port `
        -and $urlReservation.User -eq $User)
    {
        return $true
    }

    return $false
}

function New-UrlReservation
{
    [CmdletBinding()]
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [String]$Protocol = "http",

        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [String]$Hostname = "*",

        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [String]$Port,

        [ValidateNotNullOrEmpty()]
        [String]$User
    )

    $url = Get-Url $Protocol $Hostname $Port
    Invoke-NetshUrlAcl -Protocol $Protocol -Operation "add" -Url $url -User $User
}

function Remove-UrlReservation
{
    [CmdletBinding()]
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [String]$Protocol = "http",

        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [String]$Hostname = "*",

        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [String]$Port
    )

    $url = Get-Url $Protocol $Hostname $Port
    Invoke-NetshUrlAcl -Protocol $Protocol -Operation "del" -Url $url
}

function Get-Url
{
    [CmdletBinding()]
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [String]$Protocol = "http",

        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [String]$Hostname = "*",

        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [String]$Port
    )

    return "${Protocol}://${Hostname}:${Port}/"
}

function Invoke-NetshUrlAcl
{
    [CmdletBinding()]
    [OutputType([System.String])]
    param
    (
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [String]$Protocol = "http",

        [parameter(Mandatory = $true)]
        [ValidateSet("add","del","show")]
        [String]$Operation,

        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [String]$Url,

        [String]$User
    )
    $argumentList = @(
        $Protocol, $Operation, 'urlacl',
        "url=""${Url}"""
    )
    if ($user)
    {
        $argumentList += "user=""${User}"""
    }
    $outputPath = "${env:TEMP}\netsh.out"
    $process = Start-Process netsh -ArgumentList $argumentList -Wait -NoNewWindow -RedirectStandardOutput $outputPath -Passthru
    if ($process.ExitCode -ne 0) { throw "Error performing operation '${Operation}' for reserved url"}
    return ((Get-Content $outputPath) -join "`n")
}


Export-ModuleMember -function Get-TargetResource, Set-TargetResource, Test-TargetResource

lib\cNetworking\DSCResources\SEEK_cUrlReservation\SEEK_cUrlReservation.schema.mof

Virus Scan Results

seek-dsc-networking.2.0.0.20230301-alpha9.nupkg (88795c636309) - ## / 64

In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).

Chocolatey Pro provides runtime protection from possible malware.

Version History

Version	Downloads	Last Updated	Status
SEEK DSC Networking 2.0.0.20230301-alpha9	96	Tuesday, January 3, 2023	Exempted
SEEK DSC Networking 2.0.0-alpha9	553	Thursday, July 30, 2015	Approved
SEEK DSC Networking 2.0.0-alpha7	479	Friday, May 1, 2015	Approved
SEEK DSC Networking 2.0.0-alpha6	435	Wednesday, April 22, 2015	Approved
SEEK DSC Networking 2.0.0-alpha5	480	Tuesday, April 21, 2015	Approved
SEEK DSC Networking 2.0.0-alpha4	420	Tuesday, April 21, 2015	Approved
SEEK DSC Networking 2.0.0-alpha2	445	Tuesday, February 24, 2015	Approved
SEEK DSC Networking 2.0.0-alpha1	423	Monday, February 23, 2015	Approved
SEEK DSC Networking 1.0.10	1829	Thursday, July 30, 2015	Approved
SEEK DSC Networking 1.0.9-alpha6	447	Tuesday, June 9, 2015	Approved
SEEK DSC Networking 1.0.9-alpha5	408	Tuesday, June 9, 2015	Approved
SEEK DSC Networking 1.0.9-alpha4	370	Tuesday, June 9, 2015	Approved
SEEK DSC Networking 1.0.9-alpha3	436	Tuesday, May 26, 2015	Approved
SEEK DSC Networking 1.0.9-alpha2	413	Tuesday, May 26, 2015	Approved
SEEK DSC Networking 1.0.9-alpha1	413	Friday, May 22, 2015	Approved
SEEK DSC Networking 1.0.4	503	Friday, May 1, 2015	Approved
SEEK DSC Networking 1.0.3	460	Wednesday, April 22, 2015	Approved
SEEK DSC Networking 1.0.2	396	Tuesday, April 21, 2015	Approved
SEEK DSC Networking 1.0.0.87	590	Sunday, February 22, 2015	Approved
SEEK DSC Networking 1.0.0.77	470	Sunday, January 25, 2015	Approved
SEEK DSC Networking 1.0.0.76	435	Wednesday, January 14, 2015	Approved
SEEK DSC Networking 1.0.0.75	662	Tuesday, December 2, 2014	Approved
SEEK DSC Networking 1.0.0.74	541	Sunday, November 9, 2014	Approved
SEEK DSC Networking 1.0.0.73	418	Friday, November 7, 2014	Approved
SEEK DSC Networking 1.0.0.72	413	Thursday, November 6, 2014	Approved
SEEK DSC Networking 1.0.0.71	399	Thursday, November 6, 2014	Approved
SEEK DSC Networking 1.0.0.70	416	Thursday, November 6, 2014	Approved
SEEK DSC Networking 1.0.0.69	445	Monday, November 3, 2014	Approved
SEEK DSC Networking 1.0.0.68	419	Monday, November 3, 2014	Approved
SEEK DSC Networking 1.0.0.67	385	Monday, November 3, 2014	Approved
SEEK DSC Networking 1.0.0.64	420	Thursday, October 30, 2014	Approved
SEEK DSC Networking 1.0.0.63	405	Thursday, October 30, 2014	Approved
SEEK DSC Networking 1.0.0.62	428	Monday, October 27, 2014	Approved
SEEK DSC Networking 1.0.0.61	440	Friday, October 24, 2014	Approved
SEEK DSC Networking 1.0.0.60	394	Friday, October 24, 2014	Approved
SEEK DSC Networking 1.0.0.59	395	Friday, October 24, 2014	Approved
SEEK DSC Networking 1.0.0.58	433	Friday, October 24, 2014	Approved
SEEK DSC Networking 1.0.0.55	454	Friday, October 24, 2014	Approved
SEEK DSC Networking 1.0.0.54	465	Wednesday, October 15, 2014	Approved
SEEK DSC Networking 1.0.0.53	444	Wednesday, October 15, 2014	Approved
SEEK DSC Networking 1.0.0.52	400	Wednesday, October 15, 2014	Approved
SEEK DSC Networking 1.0.0.51	411	Wednesday, October 15, 2014	Approved
SEEK DSC Networking 1.0.0.50	428	Sunday, October 12, 2014	Approved
SEEK DSC Networking 1.0.0.48	418	Friday, October 10, 2014	Approved
SEEK DSC Networking 1.0.0.47	386	Friday, October 10, 2014	Approved
SEEK DSC Networking 1.0.0.46	417	Friday, October 10, 2014	Approved
SEEK DSC Networking 1.0.0.45	411	Thursday, October 9, 2014	Approved
SEEK DSC Networking 1.0.0.43	403	Wednesday, October 8, 2014	Approved
SEEK DSC Networking 1.0.0.42	346	Wednesday, October 8, 2014	Approved
SEEK DSC Networking 1.0.0.41	366	Thursday, October 2, 2014	Approved
SEEK DSC Networking 1.0.0.40	419	Thursday, September 25, 2014	Approved
SEEK DSC Networking 1.0.0.39	407	Thursday, September 25, 2014	Approved
SEEK DSC Networking 1.0.0.37	370	Wednesday, September 24, 2014	Approved
SEEK DSC Networking 1.0.0.36	382	Monday, September 22, 2014	Approved
SEEK DSC Networking 1.0.0.35	395	Monday, September 15, 2014	Approved
SEEK DSC Networking 1.0.0.34	392	Monday, September 15, 2014	Approved
SEEK DSC Networking 1.0.0.33	332	Monday, September 15, 2014	Approved
SEEK DSC Networking 1.0.0.32	416	Thursday, September 11, 2014	Approved
SEEK DSC Networking 1.0.0.31	335	Wednesday, September 10, 2014	Approved
SEEK DSC Networking 1.0.0.30	387	Wednesday, September 10, 2014	Approved
SEEK DSC Networking 1.0.0.29	362	Wednesday, September 10, 2014	Approved
SEEK DSC Networking 1.0.0.28	382	Tuesday, September 9, 2014	Approved
SEEK DSC Networking 1.0.0.27	399	Tuesday, September 9, 2014	Approved
SEEK DSC Networking 1.0.0.20	367	Tuesday, September 9, 2014	Approved
SEEK DSC Networking 1.0.0.19	419	Tuesday, September 9, 2014	Approved
SEEK DSC Networking 1.0.0.18	403	Tuesday, September 9, 2014	Approved
SEEK DSC Networking 1.0.0.17	403	Tuesday, September 9, 2014	Approved
SEEK DSC Networking 1.0.0.13	398	Friday, September 5, 2014	Approved
SEEK DSC Networking 1.0.0.11	378	Friday, September 5, 2014	Approved
SEEK DSC Networking 1.0.0	416	Tuesday, September 9, 2014	Approved
SEEK DSC Networking 0.0.0.1	370	Tuesday, May 5, 2015	Approved

Dependencies

This package has no dependencies.

Discussion for the SEEK DSC Networking Package

Ground Rules:

This discussion is only about SEEK DSC Networking and the SEEK DSC Networking package. If you have feedback for Chocolatey, please contact the Google Group.
This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
Tell us what you love about the package or SEEK DSC Networking, or tell us what needs improvement.
Share your experiences with the package, or extra configuration or gotchas that you've found.
If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.

Resources

Events

Courses

32,301

96

03 Jan 2023

SEEK DSC Networking

SEEK DSC Networking 2.0.0.20230301-alpha9

Some Checks Have Failed or Are Not Yet Complete

Deployment Method: Individual Install, Upgrade, & Uninstall

Deployment Method:

1. Enter Your Internal Repository Url

2. Setup Your Environment

1. Ensure you are set for organizational deployment

2. Get the package into your environment

3. Copy Your Script

4. If applicable - Chocolatey configuration/installation

Ground Rules: