Step 1: Review Your Packages

Step 2: Choose Your Integration Method

Step 3: Copy Your Script or Download Config

Option 1: Copy Script

Option 2: Download Config

Step 4: Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the packages and push them to a repository
  Download Packages

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the packages:
  Download Packages
- Follow manual internalization instructions
Package Internalizer (C4B)
- Run: (additional options)
- For package and dependencies run:
- Automate package internalization

Step 5: Copy Your Script

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###

#### We initialize a few things that are needed by this script - there are no other requirements.
$ErrorActionPreference = "Stop"

#### Set TLS 1.2 (3072) as that is the minimum required by various up-to-date repositories.
#### Use integers because the enumeration value for TLS 1.2 won't exist
#### in .NET 4.0, even though they are addressable if .NET 4.5+ is
#### installed (.NET 4.5 is an in-place upgrade).
[System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072

#### We use this variable for future REST calls.
$RequestArguments = @{
    UseBasicParsing = $true
}

## 2. TOP LEVEL VARIABLES ##

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# $NugetRepositoryCredential = [PSCredential]::new(
#     "username",
#     ("password" | ConvertTo-SecureString -AsPlainText -Force)
# )
# $RequestArguments.Credential = $NugetRepositoryCredential

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it
$ChocolateyDownloadUrl = "$($NugetRepositoryUrl.TrimEnd('/'))/package/chocolatey.2.4.0.nupkg"

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# $ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

#### Download the Nupkg, appending .zip to the filename to handle archive cmdlet limitations
if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    $TempDirectory = Join-Path $env:Temp "chocolateyInstall"
    if (-not (Test-Path $TempDirectory -PathType Container)) {
        $null = New-Item -Path $TempDirectory -ItemType Directory
    }
    $DownloadedNupkg = Join-Path $TempDirectory "$(Split-Path $ChocolateyDownloadUrl -Leaf).zip"
    Invoke-WebRequest -Uri $ChocolateyDownloadUrl -OutFile $DownloadedNupkg @RequestArguments

    #### Extract the Nupkg, and run the chocolateyInstall script
    if (Get-Command Microsoft.PowerShell.Archive\Expand-Archive -ErrorAction SilentlyContinue) {
        Microsoft.PowerShell.Archive\Expand-Archive -Path $DownloadedNupkg -DestinationPath $TempDirectory -Force
    } else {
        # PowerShell versions <4.0 do not have this function available
        try {
            $shellApplication = New-Object -ComObject Shell.Application
            $zipPackage = $shellApplication.NameSpace($DownloadedNupkg)
            $destinationFolder = $shellApplication.NameSpace($TempDirectory)
            $destinationFolder.CopyHere($zipPackage.Items(), 0x10)
        } catch {
            Write-Warning "Unable to unzip package using built-in compression."
            throw $_
        }
    }

    & $(Join-Path $TempDirectory "tools\chocolateyInstall.ps1")
}

if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    refreshenv
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# choco feature enable -n useFipsCompliantChecksums

### b. Apply Recommended Configuration ###
#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
choco config set --name cacheLocation --value C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
choco config set --name commandExecutionTimeoutSeconds --value 14400

#### Turn off download progress when running choco through integrations
choco feature disable --name showDownloadProgress

### c. Sources ###
#### Remove the default community package repository source
choco source list --limitoutput | ConvertFrom-Csv -Header 'Name', 'Location' -Delimiter '|' | ForEach-Object {
    if ($_.Location -eq 'https://community.chocolatey.org/api/v2/') {
        choco source remove -n $_.Name
    }
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
if ($NugetRepositoryCredential) {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --user $NugetRepositoryCredential.UserName --password $NugetRepositoryCredential.GetNetworkCredential().Password --priority 1
} else {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --priority 1
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
choco upgrade chocolatey --confirm

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
choco install chocolatey-license --source $NugetRepositoryUrl --confirm

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco source disable --name chocolatey.licensed
} else {
    Write-Warning "Not disabling 'chocolatey.licensed' feed, as Chocolatey-License has not been installed."
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco install chocolatey.extension --source $NugetRepositoryUrl --confirm
} else {
    Write-Warning "Not installing 'chocolatey.extension', as Chocolatey-License has not been installed."
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
choco feature disable --name showNonElevatedWarnings
choco feature enable --name useBackgroundService
choco feature enable --name useBackgroundServiceWithNonAdministratorsOnly
choco feature enable --name allowBackgroundServiceUninstallsFromUserInstallsOnly
choco config set --name allowedBackgroundServiceCommands --value "install,upgrade,uninstall"

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if ($ChocolateyCentralManagementUrl) {
    choco install chocolatey-agent --source $NugetRepositoryUrl --confirm
    choco config set --name CentralManagementServiceUrl --value $ChocolateyCentralManagementUrl
    if ($ChocolateyCentralManagementClientSalt) {
        choco config set --name centralManagementClientCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementClientSalt
    }
    if ($ChocolateyCentralManagementServiceSalt) {
        choco config set --name centralManagementServiceCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementServiceSalt
    }
    choco feature enable --name useChocolateyCentralManagement
    choco feature enable --name useChocolateyCentralManagementDeployments
}

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. chocolatey.chocolatey
##### You will require the chocolatey.chocolatey collection to be installed
##### on all machines using this playbook.
##### Please see https://github.com/chocolatey/chocolatey-ansible/#installing-the-collection-from-ansible-galaxy

- name: Install and Configure Chocolatey
  hosts: all

## 2. TOP LEVEL VARIABLES ##
  vars:

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
    nuget_repository_url: INTERNAL REPO URL

### b. Internal Repository Credential ###
#### If required, add the repository access credential here and
#### uncomment lines with source_username and source_password below
#    nuget_repository_username: username
#    nuget_repository_password: password

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#    chocolatey_central_management_url: https://chocolatey-central-management:24020/ChocolateyManagementService

#### ii. If using a Client Salt, add it here
#    chocolatey_central_management_client_salt: clientsalt

#### iii. If using a Service Salt, add it here
#    chocolatey_central_management_service_salt: servicesalt

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

  tasks:
  - name: Install chocolatey
    win_chocolatey:
      name: chocolatey
      source: ""{{ nuget_repository_url }}""
      # source_username: ""{{ nuget_repository_username }}""
      # source_password: ""{{ nuget_repository_password }}""

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#   - name: Enable FIPS compliance
#     win_chocolatey_feature:
#       name: useFipsCompliantChecksums
#       state: enabled

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
  - name: Set the cache location
    win_chocolatey_config:
      name: cacheLocation
      state: present
      value: C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
  - name: Set the command execution timeout
    win_chocolatey_config:
      name: commandExecutionTimeoutSeconds
      state: present
      value: 14400

#### Turn off download progress when running choco through integrations
  - name: Disable showing download progress
    win_chocolatey_feature:
      name: showDownloadProgress
      state: disabled

### c. Sources ###
#### Remove the default community package repository source
  - name: Remove Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey
      state: absent

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here
#### NOTE: This EXAMPLE may require changes
  - name: Add Internal Repository
    win_chocolatey_source:
      name: ChocolateyInternal
      state: present
      source: {{ nuget_repository_url }}
      # source_username: {{ nuget_repository_username }}
      # source_password: {{ nuget_repository_password }}
      priority: 1

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
  - name: Upgrade Chocolatey
    win_chocolatey:
      name: chocolatey
      state: latest

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.
### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
  - name: Install Chocolatey License
    win_chocolatey:
      name: chocolatey-license
      source: ChocolateyInternal
      state: latest

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
  - name: Disable Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey.licensed
      state: disabled

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
  - name: Install Chocolatey Extension
    win_chocolatey:
      name: chocolatey.extension
      source: ChocolateyInternal
      state: latest

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
  - name: Hide not-elevated warnings
    win_chocolatey_feature:
      name: showNonElevatedWarnings
      state: disabled

  - name: Use background mode for self-service
    win_chocolatey_feature:
      name: useBackgroundService
      state: enabled

  - name: Use background service for non-admins
    win_chocolatey_feature:
      name: useBackgroundServiceWithNonAdministratorsOnly
      state: enabled

  - name: Allow background uninstallation for user installs
    win_chocolatey_feature:
      name: allowBackgroundServiceUninstallsFromUserInstallsOnly
      state: enabled

  - name: Set allowed background service commands
    win_chocolatey_config:
      name: backgroundServiceAllowedCommands
      state: present
      value: install,upgrade,uninstall

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
  - name: Install Chocolatey Agent
    when: chocolatey_central_management_url is defined
    win_chocolatey:
      name: chocolatey-agent
      source: ChocolateyInternal
      state: latest

  - name: Set the Central Management Service URL
    when: chocolatey_central_management_url is defined
    win_chocolatey_config:
      name: CentralManagementServiceUrl
      state: present
      value: {{ chocolatey_central_management_url }}

  - name: Set the Central Management Client Salt
    when: chocolatey_central_management_client_salt is defined
    win_chocolatey_config:
      name: centralManagementClientCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_client_salt }}

  - name: Set the Central Management Service Salt
    when: chocolatey_central_management_service_salt is defined
    win_chocolatey_config:
      name: centralManagementServiceCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_service_salt }}

  - name: Use Central Management
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagement
      state: enabled

  - name: Use Central Management Deployments
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagementDeployments
      state: enabled

See docs at https://docs.chef.io/resource_chocolatey_package.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### The Chocolatey resources are available with any recent version of Chef.
#### We utilise the Chocolatey recipe to install the Chocolatey binaries.
include_recipe "chocolatey"

## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# NugetRepositoryUsername = "username"
# NugetRepositoryPassword = "password"

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
ChocolateyNupkgUrl = "INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg",

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
node['chocolatey']['install vars'] = {
  'chocolateyDownloadUrl' => "#{ChocolateyNupkgUrl}",
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# chocolatey_feature 'useFipsCompliantChecksums' do
#   action :enable
# end

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolatey_config 'cacheLocation' do
  value 'C:\ProgramData\chocolatey\cache'
end

#### Increase timeout to at least 4 hours
chocolatey_config 'commandExecutionTimeoutSeconds' do
  value '14400'
end

#### Turn off download progress when running choco through integrations
chocolatey_feature 'showDownloadProgress' do
  action :disable
end

### c. Sources ###
#### Remove the default community package repository source
chocolatey_source 'chocolatey' do
  action :remove
end

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
chocolatey_source 'ChocolateyInternal' do
  source "#{NugetRepositoryUrl}"
  priority 1
  action   :add
end

execute 'ChocolateyInternal' do
  command "choco source add --name ChocolateyInternal -s #{NugetRepositoryUrl} -u=#{NugetRepositoryUsername} -p=#{NugetRepositoryPassword} --priority=1"
  only_if { NugetRepositoryUsername != nil || NugetRepositoryPassword != nil }
end

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
chocolatey_package 'chocolatey' do
  action :upgrade
  source "#{NugetRepositoryUrl}"
end

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
chocolatey_package 'chocolatey-license' do
  action :install
  source "#{NugetRepositoryUrl}"
end

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
chocolatey_source 'chocolatey.licensed' do
  action            :disable
end

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
chocolatey_package 'chocolatey.extention' do
  action     install
  source     "#{NugetRepositoryUrl}"
end

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolatey_feature 'showNonElevatedWarnings' do
  action :disable
end

chocolatey_feature 'useBackgroundService' do
  action :enable
end

chocolatey_feature 'useBackgroundServiceWithNonAdministratorsOnly' do
  action :enable
end

chocolatey_feature 'allowBackgroundServiceUninstallsFromUserInstallsOnly' do
  action :enable
end

chocolatey_config 'backgroundServiceAllowedCommands' do
  value 'install,upgrade,uninstall'
end

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
chocolatey_package 'chocolatey-agent' do
  action     install
  source     "#{NugetRepositoryUrl}"
  # user       "#{NugetRepositoryUsername}"
  # password   "#{NugetRepositoryPassword}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'CentralManagementServiceUrl' do
  value  "#{ChocolateyCentralManagementUrl}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'centralManagementClientCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementClientSalt}"
  only_if { ChocolateyCentralManagementClientSalt != nil }
end

chocolatey_config 'centralManagementServiceCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementServiceSalt}"
  only_if { ChocolateyCentralManagementServiceSalt != nil }
end

chocolatey_feature 'useChocolateyCentralManagement' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_feature 'useChocolateyCentralManagementDeployments' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.

If Applicable - Chocolatey Configuration/Installation


#requires -Modules cChoco
## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires chocolatey\cChoco DSC module to be installed on the machine compiling the DSC manifest
#### NOTE: This will need to be installed before running the DSC portion of this script
if (-not (Get-Module cChoco -ListAvailable)) {
    $null = Install-PackageProvider -Name NuGet -MinimumVersion 2.8.5.201 -Force
    if (($PSGallery = Get-PSRepository -Name PSGallery).InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy Trusted
    }
    Install-Module -Name cChoco
    if ($PSGallery.InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy $PSGallery.InstallationPolicy
    }
}

#### ii. Requires a hosted copy of the install.ps1 script
##### This should be available to download without authentication.
##### The original script can be found here: https://community.chocolatey.org/install.ps1

Configuration ChocolateyConfig {
## 2. TOP LEVEL VARIABLES ##
    param(
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
        $NugetRepositoryUrl      = "INTERNAL REPO URL",

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
        $ChocolateyNupkgUrl      = "INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg",

### c. Internal Repository Credential ###
#### If required, add the repository access credential here
#        $NugetRepositoryCredential = [PSCredential]::new(
#            "username",
#            ("password" | ConvertTo-SecureString -AsPlainText -Force)
#        ),

### d. Install.ps1 URL
#### The path to the hosted install script:
        $ChocolateyInstallPs1Url = "https://community.chocolatey.org/install.ps1"

### e. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#        $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService",

#### ii. If using a Client Salt, add it here
#        $ChocolateyCentralManagementClientSalt = "clientsalt",

#### iii. If using a Service Salt, add it here
#        $ChocolateyCentralManagementServiceSalt = "servicesalt"
    )
    Import-DscResource -ModuleName PSDesiredStateConfiguration
    Import-DscResource -ModuleName cChoco

    Node 'localhost' {
## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
        Environment chocoDownloadUrl {
            Name  = "chocolateyDownloadUrl"
            Value = $ChocolateyNupkgUrl
        }

        cChocoInstaller installChocolatey {
            DependsOn = "[Environment]chocoDownloadUrl"
            InstallDir = Join-Path $env:ProgramData "chocolatey"
            ChocoInstallScriptUrl = $ChocolateyInstallPs1Url
        }

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#        cChocoFeature featureFipsCompliance {
#            FeatureName = "useFipsCompliantChecksums"
#        }

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
        cChocoConfig cacheLocation {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "cacheLocation"
            Value      = "C:\ProgramData\chocolatey\cache"
        }

#### Increase timeout to at least 4 hours
        cChocoConfig commandExecutionTimeoutSeconds {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "commandExecutionTimeoutSeconds"
            Value      = 14400
        }

#### Turn off download progress when running choco through integrations
        cChocoFeature showDownloadProgress {
            DependsOn   = "[cChocoInstaller]installChocolatey"
            FeatureName = "showDownloadProgress"
            Ensure      = "Absent"
        }

### c. Sources ###
#### Remove the default community package repository source
        cChocoSource removeCommunityRepository {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name       = "chocolatey"
            Ensure     = "Absent"
        }

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here.
#### NOTE: This EXAMPLE may require changes
        cChocoSource addInternalSource {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name        = "ChocolateyInternal"
            Source      = $NugetRepositoryUrl
            Credentials = $NugetRepositoryCredential
            Priority    = 1
        }

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
        cChocoPackageInstaller updateChocolatey {
            DependsOn   = "[cChocoSource]addInternalSource", "[cChocoSource]removeCommunityRepository"
            Name        = "chocolatey"
            AutoUpgrade = $true
        }

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
        cChocoPackageInstaller chocolateyLicense {
            DependsOn = "[cChocoPackageInstaller]updateChocolatey"
            Name      = "chocolatey-license"
        }

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
        Script disableLicensedSource {
            DependsOn  = "[cChocoPackageInstaller]chocolateyLicense"
            GetScript  = {
                $Source = choco source list --limitoutput | `
                    ConvertFrom-Csv -Delimiter '|' -Header Name, Source, Disabled | `
                    Where-Object Name -eq "chocolatey.licensed"

                return @{
                    Result = if ($Source) {
                        [bool]::Parse($Source.Disabled)
                    } else {
                        Write-Warning "Source 'chocolatey.licensed' was not present."
                        $true  # Source does not need disabling
                    }
                }
            }
            SetScript  = {
                $null = choco source disable --name "chocolatey.licensed"
            }
            TestScript = {
                $State = [ScriptBlock]::Create($GetScript).Invoke()
                return $State.Result
            }
        }

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
        cChocoPackageInstaller chocolateyLicensedExtension {
            DependsOn = "[Script]disableLicensedSource"
            Name      = "chocolatey.extension"
        }

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
        cChocoFeature hideElevatedWarnings {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "showNonElevatedWarnings"
            Ensure      = "Absent"
        }

        cChocoFeature useBackgroundService {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundService"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceWithNonAdmins {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundServiceWithNonAdministratorsOnly"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceUninstallsForUserInstalls {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "allowBackgroundServiceUninstallsFromUserInstallsOnly"
            Ensure      = "Present"
        }

        cChocoConfig allowedBackgroundServiceCommands {
            DependsOn   = "[cChocoFeature]useBackgroundService"
            ConfigName = "backgroundServiceAllowedCommands"
            Value       = "install,upgrade,uninstall"
        }

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
        if ($ChocolateyCentralManagementUrl) {
            cChocoPackageInstaller chocolateyAgent {
                DependsOn = "[cChocoPackageInstaller]chocolateyLicensedExtension"
                Name      = "chocolatey-agent"
            }

            cChocoConfig centralManagementServiceUrl {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                ConfigName = "CentralManagementServiceUrl"
                Value       = $ChocolateyCentralManagementUrl
            }

            if ($ChocolateyCentralManagementClientSalt) {
                cChocoConfig centralManagementClientSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementClientCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementClientSalt
                }
            }

            if ($ChocolateyCentralManagementServiceSalt) {
                cChocoConfig centralManagementServiceSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementServiceCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementServiceSalt
                }
            }

            cChocoFeature useCentralManagement {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagement"
                Ensure      = "Present"
            }

            cChocoFeature useCentralManagementDeployments {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagementDeployments"
                Ensure      = "Present"
            }
        }
    }
}

# If working this into an existing configuration with a good method for
$ConfigData = @{
    AllNodes = @(
        @{
            NodeName                    = "localhost"
            PSDscAllowPlainTextPassword = $true
        }
    )
}

try {
    Push-Location $env:Temp
    $Config = ChocolateyConfig -ConfigurationData $ConfigData
    Start-DscConfiguration -Path $Config.PSParentPath -Wait -Verbose -Force
} finally {
    Pop-Location
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires puppetlabs/chocolatey module
####  See https://forge.puppet.com/puppetlabs/chocolatey


## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$_repository_url = 'INTERNAL REPO URL'

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
$_choco_download_url = 'INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg'

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $_chocolatey_central_management_url = 'https://chocolatey-central-management:24020/ChocolateyManagementService'

#### ii. If using a Client Salt, add it here
# $_chocolatey_central_management_client_salt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $_chocolatey_central_management_service_salt = 'servicesalt'


## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
### Note: `chocolatey_download_url is completely different than normal
###  source locations. This is directly to the bare download url for the
###  chocolatey.nupkg, similar to what you see when you browse to
###  https://community.chocolatey.org/api/v2/package/chocolatey
class {'chocolatey':
  chocolatey_download_url => $_choco_download_url,
  use_7zip                => false,
}


## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations

#chocolateyfeature {'useFipsCompliantChecksums':
#  ensure => enabled,
#}

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolateyconfig {'cacheLocation':
  value => 'C:\ProgramData\chocolatey\cache',
}

#### Increase timeout to at least 4 hours
chocolateyconfig {'commandExecutionTimeoutSeconds':
  value => '14400',
}

#### Turn off download progress when running choco through integrations
chocolateyfeature {'showDownloadProgress':
  ensure => disabled,
}

### c. Sources ###
#### Remove the default community package repository source
chocolateysource {'chocolatey':
  ensure   => absent,
  location => 'https://community.chocolatey.org/api/v2/',
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE requires changes
chocolateysource {'internal_chocolatey':
  ensure             => present,
  location           => $_repository_url,
  priority           => 1,
  username           => 'optional',
  password           => 'optional,not ensured',
  bypass_proxy       => true,
  admin_only         => false,
  allow_self_service => false,
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/

package {'chocolatey':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}


## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/guides/organizations/organizational-deployment-guide#exercise-4-create-a-package-for-the-license

# TODO: Add resource for installing/ensuring the chocolatey-license package
package {'chocolatey-license':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
## Disabled sources still need all other attributes until
## https://tickets.puppetlabs.com/browse/MODULES-4449 is resolved.
## Password is necessary with user, but not ensurable, so it should not
## matter what it is set to here. If you ever do get into trouble here,
## the password is your license GUID.
chocolateysource {'chocolatey.licensed':
  ensure   => disabled,
  priority => '10',
  user     => 'customer',
  password => '1234',
  require  => Package['chocolatey-license'],
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
package {'chocolatey.extension':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
  require  => Package['chocolatey-license'],
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolateyfeature {'showNonElevatedWarnings':
  ensure => disabled,
}

chocolateyfeature {'useBackgroundService':
  ensure => enabled,
}

chocolateyfeature {'useBackgroundServiceWithNonAdministratorsOnly':
  ensure => enabled,
}

chocolateyfeature {'allowBackgroundServiceUninstallsFromUserInstallsOnly':
  ensure => enabled,
}

chocolateyconfig {'backgroundServiceAllowedCommands':
  value => 'install,upgrade,uninstall',
}

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if $_chocolatey_central_management_url {
  package {'chocolatey-agent':
    ensure   => latest,
    provider => chocolatey,
    source   => $_repository_url,
    require  => Package['chocolatey-license'],
  }

  chocolateyconfig {'CentralManagementServiceUrl':
    value   => $_chocolatey_central_management_url,
  }

  if $_chocolatey_central_management_client_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  if $_chocolatey_central_management_service_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  chocolateyfeature {'useChocolateyCentralManagement':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }

  chocolateyfeature {'useChocolateyCentralManagementDeployments':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }
}

Need Help? View our docs or file an issue.

There is already a version of this package in your Script Builder

Current Version	New Version

Downloads:

9,836

Downloads of v 1.3.3-rc1:

156

Last Update:

17 Apr 2020

Package Maintainer(s):

charliepoole

Software Author(s):

Charlie Poole

Tags:

testcentric nunit gui runner test centric testing tdd

TestCentric Runner for NUnit

This is a prerelease version of TestCentric Runner for NUnit.

1.3.3-rc1 | Updated: 17 Apr 2020

Downloads:

9,836

Downloads of v 1.3.3-rc1:

156

Maintainer(s):

charliepoole

Software Author(s):

Charlie Poole

Tags:

testcentric nunit gui runner test centric testing tdd

TestCentric Runner for NUnit 1.3.3-rc1

This is a prerelease version of TestCentric Runner for NUnit.

Legal Disclaimer: Neither this package nor Chocolatey Software, Inc. are affiliated with or endorsed by Charlie Poole. The inclusion of Charlie Poole trademark(s), if any, upon this webpage is solely to identify Charlie Poole goods or services and not for commercial purposes.

Some Checks Have Failed or Are Not Yet Complete

Not All Tests Have Passed

Hide Checks

Validation Testing Passed

Verification Testing Passed

Details

Scan Testing Resulted in Flagged:

This package was submitted (and approved) prior to automated virus scanning integration into the package moderation processs.

We recommend clicking the "Details" link to make your own decision on installing this package.

Details

Learn More

Deployment Method: Individual Install, Upgrade, & Uninstall

To install TestCentric Runner for NUnit, run the following command from the command line or from PowerShell:

To upgrade TestCentric Runner for NUnit, run the following command from the command line or from PowerShell:

To uninstall TestCentric Runner for NUnit, run the following command from the command line or from PowerShell:

NOTE

This applies to both open source and commercial editions of Chocolatey.

1. Enter Your Internal Repository Url

(this should look similar to https://community.chocolatey.org/api/v2/)

2. Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the package and push it to a repository Download

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the package:
  Download
- Follow manual internalization instructions

Package Internalizer (C4B)

Run: (additional options)

choco download testcentric-gui --internalize --version=1.3.3-rc1 --pre --source=https://community.chocolatey.org/api/v2/

For package and dependencies run:

choco push --source="'INTERNAL REPO URL'"

Automate package internalization

3. Copy Your Script

choco upgrade testcentric-gui -y --source="'INTERNAL REPO URL'" --version="'1.3.3-rc1'" --prerelease [other options]

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:


choco upgrade testcentric-gui -y --source="'INTERNAL REPO URL'" --version="'1.3.3-rc1'" --prerelease
$exitCode = $LASTEXITCODE

Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
  Exit 0
}

Exit $exitCode


- name: Install testcentric-gui
  win_chocolatey:
    name: testcentric-gui
    version: '1.3.3-rc1'
    source: INTERNAL REPO URL
    state: present
    allow_prerelease: yes

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.


chocolatey_package 'testcentric-gui' do
  action    :install
  source   'INTERNAL REPO URL'
  version  '1.3.3-rc1'
  options  '--prerelease'
end

See docs at https://docs.chef.io/resource_chocolatey_package.html.


cChocoPackageInstaller testcentric-gui
{
    Name        = "testcentric-gui"
    Version     = "1.3.3-rc1"
    Source      = "INTERNAL REPO URL"
    chocoParams = "--prerelease"
}

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.


package { 'testcentric-gui':
  ensure          => '1.3.3-rc1',
  install_options => ['--prerelease'],
  provider        => 'chocolatey',
  source          => 'INTERNAL REPO URL',
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

4. If applicable - Chocolatey configuration/installation

See infrastructure management matrix for Chocolatey configuration elements and examples.

Package Approved

This package was approved as a trusted package on 17 Apr 2020.

Description

The TestCentric Runner for NUnit (TestCentric) is a GUI runner aimed at eventually supporting a range of .NET testing frameworks. In the 1.x release series, we are concentrating on support of NUnit tests. The user interface is based on the layout and feature set of the of the original NUnit GUI, with the internals modified so as to run NUnit 3 tests.

This package includes the both the standard TestCentric GUI runner (testcentric.exe) and an experiental runner (tc-next.exe) which is available for... wait for it... experimentation! The package incorporates the TestCentric test engine, a modified version of the NUnit engine.

Features

Most features of the NUnit V2 Gui runner are supported. See CHANGES.txt for more detailed information.

NUnit engine extensions are supported but no extensions are bundled with the GUI itself. They must be installed separately using chocolatey. In particular, to run NUnit V2 tests, you should install the NUnit V2 Framework Driver Extension.

Warning: When using the GUI chocolatey package, only chocolatey-packaged extensions will be availble. This is by design.

Prerequisites

TestCentric requires .NET 4.5 or later in order to function, although your tests may run in a separate process under other framework versions.

Projects with tests to be run under TestCentric must already have some version of the NUnit framework installed separtely.

Files

tools\agents\net20\app.config

<?xml version="1.0" encoding="utf-8"?>
<configuration>
  <!--
   Nunit-agent only runs under .NET 2.0 or higher. 
   The setting    useLegacyV2RuntimeActivationPolicy only applies 
   under .NET 4.0 and permits use of mixed mode assemblies, 
   which would otherwise not load correctly. 
  -->
  <startup useLegacyV2RuntimeActivationPolicy="true">
    <!--
     Nunit-agent is normally run by the console or gui
     runners and not independently. In normal usage, 
     the runner specifies which runtime should be used.
     
     Do NOT add any supportedRuntime elements here, 
     since they may prevent the runner from controlling 
     the runtime that is used!
    -->
  </startup>

  <runtime>
    <!-- Ensure that test exceptions don't crash NUnit -->
    <legacyUnhandledExceptionPolicy enabled="1" />

    <!--
     Since legacyUnhandledExceptionPolicy keeps the console from being killed even though an NUnit framework
     test worker thread is killed, this is needed to prevent a hang. NUnit framework can only handle these
     exceptions when this config element is present. (Or if future versions of NUnit framework drop support
     for partial trust which would enable it to use [HandleProcessCorruptedStateExceptions].)
    -->
    <legacyCorruptedStateExceptionsPolicy enabled="true" />

    <!-- Run partial trust V2 assemblies in full trust under .NET 4.0 -->
    <loadFromRemoteSources enabled="true" />

    <!-- Enable reading source information from Portable and Embedded PDBs when running applications -->
    <!-- built against previous .NET Framework versions on .NET Framework 4.7.2 -->
    <AppContextSwitchOverrides value="Switch.System.Diagnostics.IgnorePortablePDBsInStackTraces=false" />
  </runtime>
  
</configuration>

tools\agents\net20\nunit.engine.api.dll

md5: FC515684D4EA9F06DC2A4F50873065F3 | sha1: 3222F73449533EB37684228E73CAB51CBAAEACDA | sha256: 2E0B6A33ED0686B040EEA991D5F44F1273C840C569D76DE5E2E4C1D942104289 | sha512: B8FDDDB7402007C4CAD97790979A462C8C79C3BAA00D23C2A7B70B145F936081F2E9E2443401C2364A4E94C41DD1A9E45BBC576EB6A17649317658488BF7F057

tools\agents\net20\testcentric-agent-x86.exe

md5: 0B7F871FA966F8EEC3A27C36B7651192 | sha1: F09C2C04CFAEAD291E568304E6E6B78C358B6E7B | sha256: 5D0DF6099B7C74C24A96EC87B85B8D1CA4AA084DB4AA608B59D8F56934E14C60 | sha512: 3CFC8F07AD8A5D7BA9DA20BF8161991D19B07D42ABD7895AFD4E000FBCE47E7EFC44C38145724189BA1B7952FC2A589327FC0198A28BC2A2621258FBA72D4699

tools\agents\net20\testcentric-agent-x86.exe.config

<?xml version="1.0" encoding="utf-8"?>
<configuration>
  <!--
   Nunit-agent only runs under .NET 2.0 or higher. 
   The setting    useLegacyV2RuntimeActivationPolicy only applies 
   under .NET 4.0 and permits use of mixed mode assemblies, 
   which would otherwise not load correctly. 
  -->
  <startup useLegacyV2RuntimeActivationPolicy="true">
    <!--
     Nunit-agent is normally run by the console or gui
     runners and not independently. In normal usage, 
     the runner specifies which runtime should be used.
     
     Do NOT add any supportedRuntime elements here, 
     since they may prevent the runner from controlling 
     the runtime that is used!
    -->
  </startup>

  <runtime>
    <!-- Ensure that test exceptions don't crash NUnit -->
    <legacyUnhandledExceptionPolicy enabled="1" />

    <!--
     Since legacyUnhandledExceptionPolicy keeps the console from being killed even though an NUnit framework
     test worker thread is killed, this is needed to prevent a hang. NUnit framework can only handle these
     exceptions when this config element is present. (Or if future versions of NUnit framework drop support
     for partial trust which would enable it to use [HandleProcessCorruptedStateExceptions].)
    -->
    <legacyCorruptedStateExceptionsPolicy enabled="true" />

    <!-- Run partial trust V2 assemblies in full trust under .NET 4.0 -->
    <loadFromRemoteSources enabled="true" />

    <!-- Enable reading source information from Portable and Embedded PDBs when running applications -->
    <!-- built against previous .NET Framework versions on .NET Framework 4.7.2 -->
    <AppContextSwitchOverrides value="Switch.System.Diagnostics.IgnorePortablePDBsInStackTraces=false" />
  </runtime>
  
</configuration>

tools\agents\net20\testcentric-agent-x86.pdb

tools\agents\net20\testcentric-agent.choco.addins

tools\agents\net20\testcentric-agent.exe

md5: 7550D0DB597F323DFA75B61A7848053C | sha1: 302068DC2A901596579A937E80A4C421BA863F6C | sha256: 944DDCAEEA37F6DF3DEF75D1EC04C903CC6C5A73B8CF53F12722AA7B55906A8C | sha512: 47E95A71776EE8626BA5636D1096172A90FD9A844BFF7CBCDBD18E78CAE50480893A50836450F26ACEE3F49CB2978F85D7ABF89AD83FFB417B565357A22D899E

tools\agents\net20\testcentric-agent.exe.config

<?xml version="1.0" encoding="utf-8"?>
<configuration>
  <!--
   Nunit-agent only runs under .NET 2.0 or higher. 
   The setting    useLegacyV2RuntimeActivationPolicy only applies 
   under .NET 4.0 and permits use of mixed mode assemblies, 
   which would otherwise not load correctly. 
  -->
  <startup useLegacyV2RuntimeActivationPolicy="true">
    <!--
     Nunit-agent is normally run by the console or gui
     runners and not independently. In normal usage, 
     the runner specifies which runtime should be used.
     
     Do NOT add any supportedRuntime elements here, 
     since they may prevent the runner from controlling 
     the runtime that is used!
    -->
  </startup>

  <runtime>
    <!-- Ensure that test exceptions don't crash NUnit -->
    <legacyUnhandledExceptionPolicy enabled="1" />

    <!--
     Since legacyUnhandledExceptionPolicy keeps the console from being killed even though an NUnit framework
     test worker thread is killed, this is needed to prevent a hang. NUnit framework can only handle these
     exceptions when this config element is present. (Or if future versions of NUnit framework drop support
     for partial trust which would enable it to use [HandleProcessCorruptedStateExceptions].)
    -->
    <legacyCorruptedStateExceptionsPolicy enabled="true" />

    <!-- Run partial trust V2 assemblies in full trust under .NET 4.0 -->
    <loadFromRemoteSources enabled="true" />

    <!-- Enable reading source information from Portable and Embedded PDBs when running applications -->
    <!-- built against previous .NET Framework versions on .NET Framework 4.7.2 -->
    <AppContextSwitchOverrides value="Switch.System.Diagnostics.IgnorePortablePDBsInStackTraces=false" />
  </runtime>
  
</configuration>

tools\agents\net20\testcentric-agent.pdb

tools\agents\net20\testcentric.engine.core.dll

md5: E2AD669DB588D92131C7054A638EF293 | sha1: 428B680AC26C26DF4905D5C7ECC2943E1F1E4FA4 | sha256: 4037A7129F43E9B92BDCFFEBB5ABA9ED20CB9D99F3F8E712A7E86594DF138161 | sha512: E310F715A39D113783B2267586F27B361A6E1DFE6AE211C9A98E2DF9055A7C181152D30C91EFFF5E1580CBC3ED9DE4BCF99B4274BCC44F3CFA0CA9655893CE52

tools\agents\net20\testcentric.engine.core.pdb

tools\agents\net20\testcentric.engine.metadata.dll

md5: 8DF10E31CE9B4A49B7368A7E4C60987C | sha1: BA70930CE06FB62A1DBB0F6A3326016768599D75 | sha256: 53C64C0DF19BC09BD5B5F825A9F22286B3C45FB1853B74CB13C5B06C1571FB9C | sha512: 37B401D3B55583EAECEB99260B349E8474FB705304CB9E8B6ED80B30D01FBF17FC373027D53FDE889FE395FFF9AA73155AA041BDEA85C1F28D46A58E15F4126C

tools\agents\net20\testcentric.engine.metadata.pdb

tools\agents\net40\app.config

<?xml version="1.0" encoding="utf-8"?>
<configuration>
  <!--
   Nunit-agent only runs under .NET 2.0 or higher. 
   The setting    useLegacyV2RuntimeActivationPolicy only applies 
   under .NET 4.0 and permits use of mixed mode assemblies, 
   which would otherwise not load correctly. 
  -->
  <startup useLegacyV2RuntimeActivationPolicy="true">
    <!--
     Nunit-agent is normally run by the console or gui
     runners and not independently. In normal usage, 
     the runner specifies which runtime should be used.
     
     Do NOT add any supportedRuntime elements here, 
     since they may prevent the runner from controlling 
     the runtime that is used!
    -->
  </startup>

  <runtime>
    <!-- Ensure that test exceptions don't crash NUnit -->
    <legacyUnhandledExceptionPolicy enabled="1" />

    <!--
     Since legacyUnhandledExceptionPolicy keeps the console from being killed even though an NUnit framework
     test worker thread is killed, this is needed to prevent a hang. NUnit framework can only handle these
     exceptions when this config element is present. (Or if future versions of NUnit framework drop support
     for partial trust which would enable it to use [HandleProcessCorruptedStateExceptions].)
    -->
    <legacyCorruptedStateExceptionsPolicy enabled="true" />

    <!-- Run partial trust V2 assemblies in full trust under .NET 4.0 -->
    <loadFromRemoteSources enabled="true" />

    <!-- Enable reading source information from Portable and Embedded PDBs when running applications -->
    <!-- built against previous .NET Framework versions on .NET Framework 4.7.2 -->
    <AppContextSwitchOverrides value="Switch.System.Diagnostics.IgnorePortablePDBsInStackTraces=false" />
  </runtime>
  
</configuration>

tools\agents\net40\nunit.engine.api.dll

md5: FC515684D4EA9F06DC2A4F50873065F3 | sha1: 3222F73449533EB37684228E73CAB51CBAAEACDA | sha256: 2E0B6A33ED0686B040EEA991D5F44F1273C840C569D76DE5E2E4C1D942104289 | sha512: B8FDDDB7402007C4CAD97790979A462C8C79C3BAA00D23C2A7B70B145F936081F2E9E2443401C2364A4E94C41DD1A9E45BBC576EB6A17649317658488BF7F057

tools\agents\net40\testcentric-agent-x86.exe

md5: 76557A5A768B894BCDB0EE0742AC01EB | sha1: F0A13B5551A8E4FD5B09EA2AFC28087070C784B5 | sha256: A29D76D903756512554A73E6C7DF1F1E84EE4BBDFDDA7B59868ED8F1C0E7C7AF | sha512: 2951CA4D53E650A4818EA8C0B17283D8EF4329A6E12B56466E75A1C9BD18350120D602AD57799706E8FF931FE4468C2AEE29C0BD675498713F6D4B3F41EA261A

tools\agents\net40\testcentric-agent-x86.exe.config

<?xml version="1.0" encoding="utf-8"?>
<configuration>
  <!--
   Nunit-agent only runs under .NET 2.0 or higher. 
   The setting    useLegacyV2RuntimeActivationPolicy only applies 
   under .NET 4.0 and permits use of mixed mode assemblies, 
   which would otherwise not load correctly. 
  -->
  <startup useLegacyV2RuntimeActivationPolicy="true">
    <!--
     Nunit-agent is normally run by the console or gui
     runners and not independently. In normal usage, 
     the runner specifies which runtime should be used.
     
     Do NOT add any supportedRuntime elements here, 
     since they may prevent the runner from controlling 
     the runtime that is used!
    -->
  </startup>

  <runtime>
    <!-- Ensure that test exceptions don't crash NUnit -->
    <legacyUnhandledExceptionPolicy enabled="1" />

    <!--
     Since legacyUnhandledExceptionPolicy keeps the console from being killed even though an NUnit framework
     test worker thread is killed, this is needed to prevent a hang. NUnit framework can only handle these
     exceptions when this config element is present. (Or if future versions of NUnit framework drop support
     for partial trust which would enable it to use [HandleProcessCorruptedStateExceptions].)
    -->
    <legacyCorruptedStateExceptionsPolicy enabled="true" />

    <!-- Run partial trust V2 assemblies in full trust under .NET 4.0 -->
    <loadFromRemoteSources enabled="true" />

    <!-- Enable reading source information from Portable and Embedded PDBs when running applications -->
    <!-- built against previous .NET Framework versions on .NET Framework 4.7.2 -->
    <AppContextSwitchOverrides value="Switch.System.Diagnostics.IgnorePortablePDBsInStackTraces=false" />
  </runtime>
  
</configuration>

tools\agents\net40\testcentric-agent-x86.pdb

tools\agents\net40\testcentric-agent.choco.addins

tools\agents\net40\testcentric-agent.exe

md5: ECABD7AB3413583536F12A4CD9F96467 | sha1: 186DE90DE1C74ED33420448AD75301D8B24748C9 | sha256: D8DDEAB333E2A2EF0B8D695D3601FE3837D04486B6C0B7D3C156FF3ADFE99E55 | sha512: 6B1BF653FD6BBAC2D9869F255E770E0ED9B3AA59ECD05A1797F90585A7D80EBD67DFDB9919666AEC6EE61DCE550558E284055CEFBB04B8E56E76315709524BFC

tools\agents\net40\testcentric-agent.exe.config

<?xml version="1.0" encoding="utf-8"?>
<configuration>
  <!--
   Nunit-agent only runs under .NET 2.0 or higher. 
   The setting    useLegacyV2RuntimeActivationPolicy only applies 
   under .NET 4.0 and permits use of mixed mode assemblies, 
   which would otherwise not load correctly. 
  -->
  <startup useLegacyV2RuntimeActivationPolicy="true">
    <!--
     Nunit-agent is normally run by the console or gui
     runners and not independently. In normal usage, 
     the runner specifies which runtime should be used.
     
     Do NOT add any supportedRuntime elements here, 
     since they may prevent the runner from controlling 
     the runtime that is used!
    -->
  </startup>

  <runtime>
    <!-- Ensure that test exceptions don't crash NUnit -->
    <legacyUnhandledExceptionPolicy enabled="1" />

    <!--
     Since legacyUnhandledExceptionPolicy keeps the console from being killed even though an NUnit framework
     test worker thread is killed, this is needed to prevent a hang. NUnit framework can only handle these
     exceptions when this config element is present. (Or if future versions of NUnit framework drop support
     for partial trust which would enable it to use [HandleProcessCorruptedStateExceptions].)
    -->
    <legacyCorruptedStateExceptionsPolicy enabled="true" />

    <!-- Run partial trust V2 assemblies in full trust under .NET 4.0 -->
    <loadFromRemoteSources enabled="true" />

    <!-- Enable reading source information from Portable and Embedded PDBs when running applications -->
    <!-- built against previous .NET Framework versions on .NET Framework 4.7.2 -->
    <AppContextSwitchOverrides value="Switch.System.Diagnostics.IgnorePortablePDBsInStackTraces=false" />
  </runtime>
  
</configuration>

tools\agents\net40\testcentric-agent.pdb

tools\agents\net40\testcentric.engine.core.dll

md5: 1D987AF4680986FB97BAB3D17F2A3C7D | sha1: 51144ADFE0BB704C48C0683AC2009DD9137398A0 | sha256: 692D055A3DC9AC62FE4682F7E74F9C64276FBAADC49C0179BC3C1FA880BE9551 | sha512: EB6C68AAE98F0B8D6087AD51384368CD63E73C0E3F5C46B5D0E273E0DE50BF3A93F11900E7DFE3DCA6D38F9A6FA6A15C8353ED383FF7CB5DE8FE3E520EAACEA8

tools\agents\net40\testcentric.engine.core.pdb

tools\agents\net40\testcentric.engine.metadata.dll

md5: 31CE0C7D6AA9F45533F2BA124BF43980 | sha1: 53B0FD593224F882D82C2490203F20AC9C3927C8 | sha256: AD4F1B14ADA9BD653455677D8B19669CBA70A938109D36E211F6533DA3D8521C | sha512: 07352C775D94BB55C8DD9162AD189D31C201C7EB9494F50EA9291A886B627DB8EF22246864AAC30F74C2677683414926AABBBBD849D5B6C4905CE0987B697905

tools\agents\net40\testcentric.engine.metadata.pdb

tools\CHANGES.txt

TestCentric Runner for NUnit 1.3.3 - April 17, 2020

This release corrects a critical issue whereby engine extensions were no longer
being recognized by the GUI. Additional package testing, including use of
extensions, has been added to prevent regressions.

Issues Resolved

 * 551 Automate Release Process
 * 558 ReportPortal addins to TestCentric
 * 560 Support the NUnit engine API
 * 562 Expanded package testing prior to release
 
TestCentric Runner for NUnit 1.3.2 - March 15, 2020

This release corrects a new bug found in the 1.3.0 release and makes a
number of improvements in the automation of the release process.

Issues Resolved

 * 428 Update assemblyinfo automatically
 * 525 Create a nuget organization for TestCentric
 * 534 Automate packaging and deployment
 * 540 Support for unattended execution of the GUI
 * 542 FIXED: Default process model for 32 bit v1.3.1

TestCentric Runner for NUnit 1.3.1 - March 6, 2020

This release corrects a critical problem in the 1.3.0 release. None of the
1.3.0 packages included agents for use under .NET 4.0 and higher. This
release adds those agents.

Issues Resolved

 * 535 FIXED: Cannot load test assembly after 1.3 update
 * 536 Restructuring the build.cake script
 * 537 FIXED: Missing files in Release 1.3.0
 * 538 Add package checking tasks to build

TestCentric Runner for NUnit 1.3.0 - February 23, 2020

General

 * A NuGet package is now available on nuget.org. While we continue to
   recommend use of the chocolatey.org package for most developers, because
   it provides a central installation point for use with all projects, a
   number of users requested a nuget package as well.

   NOTE: Whichever installation package you use, you should install any
   needed extensions using the same package source.

GUI

 * The runtime selection menu is now disabled when tests are being run in
   process, since no other runtime is available within the GUI process.

Engine

 * The UserSettings service is no longer part of the engine but is handled
   directly in the GUI. This is not considered a breaking change, since
   the engine is not yet released separately from the GUI.

 * A new PackageSettings service has been added to the engine. Its job
   is to analyze all packages, examine assemblies and set default
   parameters for executing them.

 * A pair of agents are provided for .NET 4.0 in addition to the existing
   .NET 2.0 agents. In addition, the engine is now built for both runtimes
   and agents use the appropriate version. The GUI itself uses the 4.0 engine.

Issues Resolved

 * 457 Remove UserSettings from the engine
 * 466 Update Copyright headers in all files
 * 475 Engine Tests will only run in process under GUI
 * 476 Eliminate use of Mono.Cecil from engine core assembly
 * 479 Refactor RuntimeFramework to eliminate unneeded selection options
 * 480 Determine versions of .NET Core we want to support.
 * 483 Disable Runtime menu when running in process
 * 487 Determine supported platforms for the engine.
 * 488 Integrate engine build output
 * 489 Run tests for .NET Core
 * 499 Engine Tests don't run under .NET Core 2.1
 * 502 Create new Service to manage PackageSettings
 * 505 Reorganize output to allow agents for various runtimes and both 32-bit and 64-bit execution
 * 513 Modify logic of TestAgency to initiate correct agents
 * 514 Upgrade engine to target .NET 4.0
 * 517 Net40 engine.core build
 * 518 Create agent process executable for .NET Framework 4.0 and higher
 * 522 Update nuget and chocolatey packages
 * 523 Create a nuget package for the GUI
 * 528 Chocolatey package should use TestCentric icon
 * 526 Update nuget package
 * 531 Create tasks in build script for publishing packages

TestCentric Runner for NUnit 1.2.0 - December 17, 2019

This release is primarily marked by the elimination of our 
dependency on the NUnit Engine in preparation for moving
forward with features that require engine changes.

GUI

 * Inprocess test execution has been deprecated

Experimental GUI

 * The GUI font may be changed from the View menu

 * One or more files may be added to those open

 * Rerun on Change has been implemented

Test Model
 
Engine

 * We now use the TestCentric Engine, Version 0.1, replacing the NUnit Engine. 
 The new engine is based on the NUnit 3.11 engine, with modifications.

 * Engine recognizes and runs assemblies that target .NET Framework 4.6 and up.

 * Engine now recognizes .NET Core assemblies and gives an error message
 if the user attempts to open one.

 * The RecentFilesService is no longer available.

Issues Resolved

 * 215 Experimental GUI: Allow setting the gui font
 * 217 Experimental GUI: Add files to those already open
 * 233 Experimental GUI: Rerun on Change
 * 426 Switch to use of separate TestCentric Engine build
 * 445 Better error message when attempting to load .NET Core assemblies
 * 447 FIXED: Engine will not recognize .NET Framework versions beyond 4.5
 * 449 FIXED: GUI window doesn't retain size between runs
 * 454 Deprecate in-process execution
 * 455 Remove RecentFilesService from engine
 * 456 Rename engine to testcentric engine
 * 461 Convert all projects to use Package References
 * 470 Remove deprecated "Single" option for ProcessModel
 * 473 Establish Initial Version for TestCentric engine

TestCentric Runner for NUnit 1.1.0 - November 9, 2019

General

This release includes new features beyond the 1.0 release, together with some bug fixes.

Features
 * The configuration to be loaded may be specified in the GUI.
 * A new dialog allows setting parameters for the test run.
 * Test Results may be saved in any format for which an extension has been installed.
 * Additional test label options are supported.
 * The GUI uses a custom build of the latest version of the NUnit engine.
 * Includes version 0.16 of the experimental GUI.

Issues Resolved

 *   4 Save test results in alternative formats
 *  77 Setting up test parameters from gui
 * 193 Experimental GUI: Passing parameters from GUI to Tests
 * 216 Experimental GUI: Set project configuration to use
 * 275 Add --debug-agent option to the TestCentric GUI
 * 276 Deprecate old nunit-gui application on Chocolatey
 * 315 Reorganize Settings
 * 340 FIXED: Unable to run selected NUnit V2 tests
 * 347 Add TextOutput labelling of final test result
 * 372 Add command line option for specifying results file location
 * 394 Update engine
 * 395 Display version and path of loaded extensions
 * 397 Fix unhandled NullReferenceException thrown when test fails with Assert.Fail()
 * 399 Show the test assembly name in the main view's title bar.
 * 402 Set Project Configuration to use
 * 406 FIXED: Appveyor rebuild causes error
 * 412 Update link to Chocolatey package
 * 414 FIXED: Testcentric.exe needs icon
 * 415 Better installation documentation
 * 424 Use common dialog for extensions
 * 427 Ensure that agent exes are copied as part of building the project
 * 430 FIXED: Index out of range exception when adding a test file
 * 432 FIXED: TestParametersDialog enables Remove and Edit on startup

TestCentric Runner for NUnit 1.0.1 - August 15, 2019

General

This release fixes a critical error discovered after the release of 1.0.0.

Features

 * Includes version 0.15.1 of the experimental GUI

Issues Resolved

 * 325 Deploy development builds automatically
 * 380 Automate testing of packages
 * 388 FIXED: NUnit process with multiple assemblies will not load

TestCentric Runner for NUnit 1.0.0 - July 27, 2019

General

This is the final release of version 1.0 of the TestCentric Runner for NUnit, which is
primarily based on the layout and feature set of the original NUnit V2 GUI runner with
internals modified so as to run NUnit3 tests. Certain changes were made because of 
differences in how NUnit3 works and are described below under Features.

This new GUI runner was created by the TestCentric team: Charlie Poole, Mikkel Bundgaard,
Manfred Lange, Stefano Nuzzo and Robert Snyder. Community members who contributed code to
this release include Jeff Kryzer, zBrianW, Joseph Musser and Mattias Karlsson. Countless
other folks contributed by filing issues, asking questions and making suggestions.
 
Features

 * TestCentric relies on the NUnit engine to load and run tests. Features that require 
 an engine extension are only available if the appropriate extension is installed. In
 particular, this includes the ability to open both NUnit and Visual Studio projects,
 run NUNit V2 tests and save results in V2 format.
 
 * All direct access to NUnit project contents, such as editing, saving and adding
 configurations, has been removed. The user should use a separate editor such as
 the NUnit Project Editor to perform those tasks.

 * Because the GUI runs under .NET 4.5 or higher, any tests that you cause to execute
 in-process will run under that version of the framework. In some cases, this may give
 different results. By default, tests are run in a separate process and use the target
 framework for which they were built. We recommend you stick with the default.

 * The File menu no longer has entries for Load Fixture or Clear Fixture. New menu 
 items to select Process and AppDomain options for loading have been added and the
 corresponding Settings pages removed.

 * The Project top level menu has been removed since it was mostly used to contain
 entries related to NUnit projects. The "Add Projects" entry has been replaced by 
 "Add Files" on the File menu.

 * The Tools menu no longer has entries for Exception Details or Test Assemblies. 
 The Open Log Directory entry has been replaced with Open Work Directory.

 * The Result Tabs (Errors and Failures, Tests Not Run, and Text Output) may no 
 longer be hidden. The Text Output tab only displays Console output and the ability 
 to tailor it's contents has been removed with the exception of the option to label
 tests by name in various ways.

 * Version 0.15 of the Experimental GUI is included.

Known Problems

 * TestCentric uses the test id to select individual tests to be run. This is not 
 currently supported by the V2 framework driver, which throws an exception when 
 an id filter is encountered. The result for the GUI is that it is not possible
 to select individual tests for execution if any V2 framework tests are loaded.
 For that reason, we recommend that you only use this release for NUnit 3 tests.
 This problem will be fixed when a new version of the V2 driver is available,
 which includes support for an id filter.

Issues Resolved

 * 7 Credit for all contributors
 * 8 Icon and Logo for TestCentric
 * 224 FIXED: Appveyor build doesn't use generated identifier to tag packages 
 * 375 Clean up GUI About box
 * 378 Ensure that error message displays when exception is thrown in engine

TestCentric Runner for NUnit 1.0.0-Beta4 - July 17, 2019

General

This is the fourth beta release of the TestCentric Runner for NUnit. While it is still beta,
it is feature-complete. Since the actual execution of tests is done by the NUnit engine
rather than the GUI itself, it's probably reasonable for developers to use this on the
desktop, provided their CI is based on a stable production-level NUnit runner, such as
the NUnit 3 Console Runner or the NUnit 3 VS adapter.

Features

 * Version 0.14 of the Experimental GUI is included.

Issues Resolved

 * 368 FIXED: Arguments to --process option for GUI don't match NUnit console.
 * 369 Merge Options classes for two GUIs and move to common assembly.
 * 370 FIXED: Beta3: unhandled .net exception

TestCentric Runner for NUnit 1.0.0-Beta3 - July 14, 2019

General

This is the third beta release of the TestCentric Runner for NUnit. While it is still beta,
it is feature-complete. Since the actual execution of tests is done by the NUnit engine
rather than the GUI itself, it's probably reasonable for developers to use this on the
desktop, provided their CI is based on a stable production-level NUnit runner, such as
the NUnit 3 Console Runner or the NUnit 3 VS adapter.

Features

 * Version 0.13 of the Experimental GUI is included.
 * Added command-line options --process, --domain, --inprocess, --x86 and --agents.

Issues Resolved

 * 139 FIXED: Stop Button to interrupt infinite loop
 * 287 Assembly or project full name not shown
 * 337 FIXED: Stopping a long running test from TestCentric gui does not stop right away
 * 350 FIXED: Installed Extensions fields not cleared
 * 352 Incorporate NUnit Engine as a subtree
 * 357 Review whether File menu settings should be saved
 * 358 FIXED: Assemblies Running in Parallel (Regardless of Settings)
 * 361 FIXED: Process Model setting includes Single rather than Separate
 * 364 FIXED: Experimental GUI: Proper icons are not displayed for warnings and failures

TestCentric Runner for NUnit 1.0.0-Beta2 - May 30, 2019

General

This is the second beta release of the TestCentric Runner for NUnit. While it is still beta,
it is feature-complete. Since the actual execution of tests is done by the NUnit engine
rather than the GUI itself, it's probably reasonable for developers to use this on the
desktop, provided their CI is based on a stable production-level NUnit runner, such as
the NUnit 3 Console Runner or the NUnit 3 VS adapter.

Features

 * Version 0.12 of the Experimental GUI is included with support for user-defined icons
   and immediate text output display.

Issues Resolved
 *   5 Add online docs for the GUI
 * 229 Experimental GUI: Multiple and user-defined tree icons
 * 236 Experimental GUI: missing test output
 * 326 Update CONTRIBUTING.md
 * 328 FIXED: Reloading loads the assembly multiple times
 * 327 Document how TestCentric GUI is versioned
 * 333 FIXED: InvalidOperationException is thrown from RunStarting event handler
 * 336 FIXED: In TestCentric gui, Selected Categories are cleared on Reload
 * 345 Show names of settings in Text Output settings dialog

TestCentric Runner for NUnit 1.0.0-Beta - April 13, 2019

General

This is the beta release of the TestCentric Runner for NUnit. While it is still beta,
it is feature-complete. Since the actual execution of tests is done by the NUnit engine
rather than the GUI itself, it's probably reasonable for developers to use this on the
desktop, provided their CI is based on a stable production-level NUnit runner, such as
the NUnit 3 Console Runner or the NUnit 3 VS adapter.

Features

 * Version 0.11 of the Experimental GUI is included with support for saving test results,
   reload on change and reload on run.

Issues Resolved

 22 Create new signing key for TestCentric
212 Experimental GUI: Need SaveResults menu item
213 Experimental GUI: Reload on change
226 Display time in a more natural format
232 Experimental GUI: Reload on Run
306 FIXED: Save TestResult Dialog not initialized correctly
318 Disable ReRun on Change setting

TestCentric Runner for NUnit 1.0.0-Alpha4 - April 5, 2019

General

This is the fourth alpha release of the TestCentric Runner for NUnit. It is not yet recommended
for use in production work.

Features

 * Entries now appear in the tree display for any projects loaded
 * The GUI now uses a custom built version of the engine, based on the NUnit 3.10 engine.

Issues Resolved

164 Update NSubstitute to version 4.0
241 Terminate nunit-agent.exe / nunit-agent-x86.exe once they are no longer in use
273 FIXED: No project elements are present in the test XML received from the engine
285 FIXED: NUnit Agent locks dll
288 FIXED: Property dialog not showing assembly process id or appdomain name
290 Need a way to locate and examine log files
292 Remove project editor integration
294 Document differences from the NUnit V2 GUI
299 FIXED: Choosing "Run as X86" from menu doesn't actually load the X86 agent.
301 FIXED Tree icons of previous run do not clear when starting second run
304 FIXED Use new 3.10 release of NUnit engine

TestCentric Runner for NUnit 1.0.0-Alpha3 - February 27, 2019

General

This is the third alpha release of the TestCentric Runner for NUnit. It is not yet recommended
for use in production work.

Features

 * The Experimental GUI, which was previously a separate project, is now included along with the standard TestCentric GUI.
 * Assemblies and projects are now loadable using all process and domain settings.
 * Process and domain settings are now part of the File menu.
 * A custom engine build is included while waiting for the next NUnit engine release.
 * The zip and chocolatey packagegs now include pdb files.

Issues Resolved

 18 FIXED: Reload on Change not working
138 Double click test to start it
153 Changing font should affect status bar
154 FIXED: When opening solution file non-test assemblies cause an error message
155 FIXED: Redundant menu items under View | Tree
156 FIXED: Changing checkbox setting should not change default
159 FIXED: Project name not shown in tree
161 Create separate GUI Components assembly
163 Create Linux build.
165 Review and merge build script with experimental GUI script
170 Review and merge components assembly
175 FIXED: Start and stop button are misaligned
178 Status Bar height should adjust to font
182 Integrate ToolStripItem and ToolStripMenuItem Elements
185 FIXED: Not building Mono 5.10 or 4.6 under Travis
189 Merge experimental GUI into standard GUI project
238 FIXED: Categories on test fixtures not considered in test list design (Experimental)
251 Show file names when loading
253 FIXED: Add file to open files is broken
256 Use DialogManager to display open and save dialogs
257 FIXED: Error on reload when running in process
261 Run tests under 3.9 console runner
263 FIXED: Cannot load nunit test solution in process
264 Use custom build of NUnit engine
269 FIXED: No option to run using default process model or domain usage
274 Eliminate Default Setting Page for process model and domain usage
278 Include pdb files in packages
279 Remove engine version hack in build script

TestCentric Runner for NUnit 1.0.0-Alpha2 - November 11, 2018

General

This is the second alpha release of the TestCentric Runner for NUnit. It is not yet recommended
for use in production work.

Features

 * The GUI now uses the NUnit 3.9 engine
 * Reloading on each Run is now functional.
 * Alternate images for the tree are now implemented.
 * Saving and Restoring the visual state is now implemented.

Issues Resolved

 12 Use UpDown counter for number of recent files to display
 15 FIXED: Alternate Tree Images not working
 21 FIXED: Disabling Shadow Copy is Ignored
 76 FIXED: Exception "Cross-thread operation not valid: Control 'progressBar' accessed from a thread other than the thread it was created on."
 93 FIXED: NRE when starting the GUI
 95 Implement MVP for main form and sub-views
 99 FIXED: Scrolling not working correctly for ErrorDisplay
100 Don't display "Test-Run" as root node in tree with only one assembly
115 FIXED: Zero Length VisualState.xml file results in exception
132 Create TestCentric.Common assembly
144 Update NUnit Engine to 3.9

TestCentric Runner for NUnit 1.0.0-Alpha1 - August 3, 2018

General

This is the initial alpha release of the TestCentric Runner for NUnit. It is not yet recommended
for use in production work.

Features

This GUI runner resembles the NUnit V2 GUI, but since it runs NUnit 3 tests the internal implementation
is entirely new. In addition, features not available or not easily supported in NUnit 3 have been
removed. Some key differences from the V2 GUI are...

 * The GUI itself targets .NET 4.5, rather than 2.0.
 * We use chocolatey as the primary distribution method for the GUI. This makes extensions that are
 also installed through chocolatey available when running under the GUI. A zip file is also provided.
 * Displaying tests as a flat list of fixtures is not supported.
 * Merging tests in the same namespace across assemblies is not supported.
 * The GUI no longer understands the layout of NUnit project files, which is taken care of by the 
 NUnit test engine. Consequently, menu items relating to creating, editiong and saving such files 
 are no longer present.
 * The ability to open project files, including NUnit and VS projects, is dependent on the presence
 of the approprate engine extensions, which are not bundled with the GUI.

Issues Resolved

  1 Select Target Framework for the GUI
  2 Review of Initial Upload
  9 Update the About box
 10 Correct name for program in --help option
 13 FIXED: Number of Recent Files has no effect
 14 FIXED: Tree always cleared of results on reload
 16 FIXED: Flat list of TestFixtures not working
 17 FIXED: Reload on Run not working
 19 FIXED: Principal Policy not working
 20 FIXED: InternalTrace level not honored
 24 FIXED: Setting number of agents has no effect
 26 FIXED: Clear Results Setting is on wrong page
 27 Create CI Build Script
 28 FIXED: "Clear All" and "Check Failed" has no effect
 29 FIXED: "Run" context menu is never enabled
 32 Renaming test-centric to testcentric
 33 Restore Tree-based Setting Dialog
 39 FIXED: Cannot run the tests in TestCentric.Gui.Model.Tests.dll more than once
 42 FIXED: Not possible to run explicit tests using the GUI
 50 Review and reorganize Settings for NUnit 3
 52 FIXED: Show CheckBoxes throws NRE
 61 Disable or remove non-functional elements on Settings pages
 62 FIXED: Switching between full and mini gui display doesn't happen immediately
 63 FIXED: Check files exist setting has no effect
 64 Better error message when an assembly is not found
 66 FIXED: Project editor menu item not working.
 67 FIXED: Show Checkboxes menu and settings elements are inconsistent
 68 Save results menu should be disabled when no test has been run
 71 FIXED: Multiple files on command-line or in file open dialog not opened
 73 Multiple loaded files have no root in tree
 80 Standardize naming of TestCentric packages and executables
 83 Update tests to use NUnit 3.10.1

tools\Experimental.Gui.Runner.dll

md5: 677DE166686F65217B8C2EEDDA8BFA02 | sha1: 25193744FC2C0DA11E452C798FCA4735F9A039A5 | sha256: 6CC2F5A967FA3957BB1A2F94D33008153ED149423F8DA5D19416EC569B9A6232 | sha512: 072651E3755CB9D03B9CD994FA96A771E999E853F2F82FE554FBD2F99F46DFCC9031F2905A87FE4C1C14434486369888D74DA6DB0D1D7D15CD1FADC78A258647

tools\Experimental.Gui.Runner.pdb

tools\Images\DebugTests.png

tools\Images\RunTests.png

tools\Images\Tree\Circles\Failure.jpg

tools\Images\Tree\Circles\Ignored.jpg

tools\Images\Tree\Circles\Inconclusive.jpg

tools\Images\Tree\Circles\Skipped.jpg

tools\Images\Tree\Circles\Success.jpg

tools\Images\Tree\Classic\Failure.jpg

tools\Images\Tree\Classic\Ignored.jpg

tools\Images\Tree\Classic\Inconclusive.jpg

tools\Images\Tree\Classic\Skipped.jpg

tools\Images\Tree\Classic\Success.jpg

tools\Images\Tree\Default\Failure.png

tools\Images\Tree\Default\Ignored.png

tools\Images\Tree\Default\Inconclusive.png

tools\Images\Tree\Default\Skipped.png

tools\Images\Tree\Default\Success.png

tools\Images\Tree\Default\Warning.png

tools\Images\Tree\Visual Studio\Failure.png

tools\Images\Tree\Visual Studio\Ignored.png

tools\Images\Tree\Visual Studio\Inconclusive.png

tools\Images\Tree\Visual Studio\Skipped.png

tools\Images\Tree\Visual Studio\Success.png

tools\LICENSE.txt

Copyright (c) 2018-2019 Charlie Poole

Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.

tools\Mono.Cecil.dll

md5: 3D4A4F72FF8281FB8624C062121E8CD0 | sha1: 8747C11210686A2277F6E1755E660E24258023DA | sha256: 80DB0C28D53072ACD056793A8258925FFAE212C6433955758D31010B403CEA0D | sha512: 6EB87F4C9B570AA4BFE83AA5A9C1281372ADA124FC18429ACDF2B1697CC5114E7242AAD31F98984F305C0A536BB2D3F87EF9D884F777A93712810C223CC15E61

tools\NOTICES.txt

The TestCentric GUI Runner 1.0 is based in part on the NUnit 2.x GUI Runner, 
with portions of the code...

    Copyright (c) 2002-2014 Charlie Poole or 
    Copyright (c) 2002-2004 James W. Newkirk, Michael C. Two, Alexei A. Vorontsov or 
    Copyright (c) 2000-2002 Philip A. Craig

The TestCentric GUI Runner uses the NUnit 3 Test Engine to run tests...

    Copyright (c) 2017-2019 Charlie Poole, Rob Prouse

tools\nunit.engine.api.dll

md5: FC515684D4EA9F06DC2A4F50873065F3 | sha1: 3222F73449533EB37684228E73CAB51CBAAEACDA | sha256: 2E0B6A33ED0686B040EEA991D5F44F1273C840C569D76DE5E2E4C1D942104289 | sha512: B8FDDDB7402007C4CAD97790979A462C8C79C3BAA00D23C2A7B70B145F936081F2E9E2443401C2364A4E94C41DD1A9E45BBC576EB6A17649317658488BF7F057

tools\nunit.uiexception.dll

md5: ACFF4BD6FD24D642C0E5C365306D43CA | sha1: 0B7D381377C525C93C493868DF892DFF1862E080 | sha256: 98045736ECC7F3508339719709D0788734B465153244E4D9BD7D5A9E4228F999 | sha512: E9DE5D237414F1A4A72A8609DEA8664C83E3CD8A47153A7DA0479562A5643BA1B22E5566AD373CEDD6A3A20EDE8A0E2A02F23951C5C646589666D95CC41405DD

tools\nunit.uiexception.pdb

tools\tc-next.exe

md5: 66B37AA4CF1F44FB2DFA266E13094189 | sha1: EDAF2E2531F82B90A2CC93AC01610C0FC27B3A3B | sha256: FCCA2A2B0C5FA3BE23554E85E3873B84C40B0ABBB4CAA13DB905AADE080DA70B | sha512: 69FC53AD4F29E5E19EEEB38FCC63F97196F1848D5E264503CEDE721C8A292E7E2AA58209C85F0299B40234D4F7F25F2AD645C66BB873D04140FB7840313655C2

tools\tc-next.exe.config

<?xml version="1.0" encoding="utf-8"?>
<configuration>
  <!--
   The gui runner runs under .NET 2.0 or higher, selecting the
   highest version runtime available.
   
   The setting useLegacyV2RuntimeActivationPolicy only applies 
   under .NET 4.0 and permits use of mixed mode assemblies, 
   which would otherwise not load correctly.
  -->
  <startup useLegacyV2RuntimeActivationPolicy="true">
    <supportedRuntime version="v4.0.30319" />
    <supportedRuntime version="v2.0.50727" />
  </startup>

  <runtime>

    <!-- Ensure that test exceptions don't crash NUnit -->
    <legacyUnhandledExceptionPolicy enabled="1" />

    <!-- Run partial trust V2 assemblies in full trust under .NET 4.0 -->
    <loadFromRemoteSources enabled="true" />

  </runtime>

</configuration>

tools\tc-next.pdb

tools\testcentric-agent-x86.exe.ignore

tools\testcentric-agent.exe.ignore

tools\testcentric.choco.addins

tools\TestCentric.Common.dll

md5: 12D81C345402B857FA9C27D85F9EE1A7 | sha1: B1DAB60674A27AD19B9280798783C3880714CE84 | sha256: F2286C8922B2FCA702ACCD6017732175E65B694DB0BDAE05AA7AFFB02590F29F | sha512: 06A3ED773281DD2A562E51B7D8D1DFE48FF6A6627E62651699E999D1EC6DCEFF2097CD95C37A2A2E3C8D9E419F1373B24625BF19A15192E38E4D3D350F9FE7D1

tools\TestCentric.Common.pdb

tools\testcentric.engine.core.dll

md5: 1D987AF4680986FB97BAB3D17F2A3C7D | sha1: 51144ADFE0BB704C48C0683AC2009DD9137398A0 | sha256: 692D055A3DC9AC62FE4682F7E74F9C64276FBAADC49C0179BC3C1FA880BE9551 | sha512: EB6C68AAE98F0B8D6087AD51384368CD63E73C0E3F5C46B5D0E273E0DE50BF3A93F11900E7DFE3DCA6D38F9A6FA6A15C8353ED383FF7CB5DE8FE3E520EAACEA8

tools\testcentric.engine.core.pdb

tools\testcentric.engine.dll

md5: BFE78EA4DFBECF074F5AE5AB8B877378 | sha1: C43535B33DB2106662FA5B378FB08904135BB38F | sha256: 566E07D19B28501CA1FFB21AD05368968E72D23B63B98B47EA3467EC8A52CF94 | sha512: 36C1A7D268C7D4F34F9B53ADEC26278B98EC8E20245FAE236C421B9E000AF677FC699EA6DFABE79348BD2B11055FEA5B0192FB9F5AC41CC66ABF135AC8AD66E0

tools\testcentric.engine.metadata.dll

md5: 31CE0C7D6AA9F45533F2BA124BF43980 | sha1: 53B0FD593224F882D82C2490203F20AC9C3927C8 | sha256: AD4F1B14ADA9BD653455677D8B19669CBA70A938109D36E211F6533DA3D8521C | sha512: 07352C775D94BB55C8DD9162AD189D31C201C7EB9494F50EA9291A886B627DB8EF22246864AAC30F74C2677683414926AABBBBD849D5B6C4905CE0987B697905

tools\testcentric.engine.metadata.pdb

tools\testcentric.engine.pdb

tools\testcentric.exe

md5: C56D26752DF94177D062E15B8A77F7CA | sha1: 3456230034CCF1CE7BC94E34DCDCB2720EB1D3CA | sha256: 3D84B66816368B6CF75115940BC71334C5C9041DB0EB82CE3B03AA761C9288B1 | sha512: DA6754D545F61C5BED5CC9DE83F601DD1065490B055FEFD81982964468C799CD4CDE390257EDD6CC0E799D38D1D85199E3989663324B460CB641C12CE749E1F8

tools\testcentric.exe.config

<?xml version="1.0" encoding="utf-8"?>
<configuration>
	<!--
   The GUI only runs under .NET 2.0 or higher. The
   useLegacyV2RuntimeActivationPolicy setting only
   applies under .NET 4.0 and permits use of mixed 
   mode assemblies, which would otherwise not load 
   correctly.
  -->
	<startup useLegacyV2RuntimeActivationPolicy="true">
		<!-- Comment out the next line to force use of .NET 4.0 -->
	<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5"/></startup>
	<runtime>
		<!-- Ensure that test exceptions don't crash NUnit -->
		<legacyUnhandledExceptionPolicy enabled="1"/>
		<!-- Run partial trust V2 assemblies in full trust under .NET 4.0 -->
		<loadFromRemoteSources enabled="true"/>
		<!-- Look for addins in the addins directory for now -->
		<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
			<probing privatePath="lib;addins"/>
		</assemblyBinding>
	</runtime>
</configuration>

tools\TestCentric.Gui.Components.dll

md5: 4C08B68AB528D352D266CF57C0A45DA9 | sha1: A6ED17C75ECE5E9389680B65D54FF480CE163033 | sha256: B5C11A44AB7A5D98C35C8F852580AFEEBE6F81376240B91BF6B385E975279065 | sha512: 4A0A0A71B55A2C0773BFAD5F72BCCD5ABADDF9588EAC7531B4663D073BD60146B6452C3890830668D793A76B89DA815BE84A7ABBA8D240CFE8B8B12D58FC1BCE

tools\TestCentric.Gui.Components.pdb

tools\TestCentric.Gui.Model.dll

md5: 02B85BE5AA92F8305A12D90DCD5996D5 | sha1: 33CF6545D5950DC8DB5E84A8CAEF85A8F2A4BAD0 | sha256: 9201C751446F82E3717833528EA92D1D01A2AEE6F4B343C7C489E9DC3DBA8144 | sha512: 9FFE3092F6506E6F2C694934B5E78C45A3076CEC171D05126B9937D54200D69E7F34442E8A5FC52A54CA18A2834E1A303B125D3580E73823CDDC3E532835F4E2

tools\TestCentric.Gui.Model.pdb

tools\TestCentric.Gui.Runner.dll

md5: F3EE3AF2D89D0D37E6DB3D065156781E | sha1: 5E4AA7901E08EF9D0A3C235740CBA96331087837 | sha256: 8FF2FA57727E67128E227B3B8AF865D481C93F1CDE06E20B2F877757F689AFE9 | sha512: 995556AA0CEA56AD367E8C07FFB02FD9181ECA14D91A45F5056ADA49B658CDD18972DFF9182F50314CBE70C258D06CB568A2B724A99E8D50CC688F6D1CA6D9AF

tools\TestCentric.Gui.Runner.pdb

tools\testcentric.pdb

tools\VERIFICATION.txt

VERIFICATION
Verification is intended to assist the Chocolatey moderators and community
in verifying that this package's contents are trustworthy.

This package is published by the author of the software, Charlie Poole.
Any binaries will be identical to other package types published by the 
author at https://github.com/TestCentric/testcentric-gui.

Virus Scan Results

Mono.Cecil.dll (80db0c28d530) - ## / 71
testcentric-gui.1.3.3-rc1.nupkg (011c41dede08) - ## / 64
Experimental.Gui.Runner.dll (6cc2f5a967fa) - ## / 70
nunit.engine.api.dll (2e0b6a33ed06) - ## / 75
nunit.uiexception.dll (98045736ecc7) - ## / 71
tc-next.exe (fcca2a2b0c5f) - ## / 71
TestCentric.Common.dll (f2286c8922b2) - ## / 71
testcentric.engine.core.dll (692d055a3dc9) - ## / 70
testcentric.engine.dll (566e07d19b28) - ## / 72
testcentric.engine.metadata.dll (ad4f1b14ada9) - ## / 70
testcentric.exe (3d84b6681636) - ## / 72
TestCentric.Gui.Components.dll (b5c11a44ab7a) - ## / 70
TestCentric.Gui.Model.dll (9201c751446f) - ## / 71
TestCentric.Gui.Runner.dll (8ff2fa57727e) - ## / 71
testcentric-agent-x86.exe (5d0df6099b7c) - ## / 70
testcentric-agent.exe (944ddcaeea37) - ## / 72
testcentric.engine.core.dll (4037a7129f43) - ## / 70
testcentric.engine.metadata.dll (53c64c0df19b) - ## / 67
testcentric-agent-x86.exe (a29d76d90375) - ## / 71
testcentric-agent.exe (d8ddeab333e2) - ## / 71

In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).

Chocolatey Pro provides runtime protection from possible malware.

Version History

Version	Downloads	Last Updated	Status
testcentric-gui 2.0.0-beta6	39	Wednesday, October 16, 2024	Approved
testcentric-gui 2.0.0-beta5	125	Thursday, May 16, 2024	Approved
testcentric-gui 2.0.0-beta4	555	Thursday, November 23, 2023	Approved
testcentric-gui 2.0.0-beta3-1	72	Wednesday, October 25, 2023	Approved
testcentric-gui 2.0.0-beta3	27	Sunday, October 22, 2023	Exempted
testcentric-gui 2.0.0-beta2	71	Monday, September 4, 2023	Approved
TestCentric Runner for NUnit 2.0.0-beta1	146	Tuesday, May 9, 2023	Exempted
TestCentric Runner for NUnit 2.0.0-alpha8	110	Tuesday, April 25, 2023	Approved
TestCentric Runner for NUnit 2.0.0-alpha7	64	Monday, February 6, 2023	Approved
TestCentric Runner for NUnit 2.0.0-alpha6	101	Saturday, June 18, 2022	Approved
TestCentric Runner for NUnit 2.0.0-alpha5	90	Saturday, May 14, 2022	Approved
TestCentric Runner for NUnit 2.0.0-alpha4	191	Sunday, October 3, 2021	Approved
TestCentric Runner for NUnit 2.0.0-alpha3	83	Thursday, September 30, 2021	Approved
TestCentric Runner for NUnit 2.0.0-alpha2	229	Sunday, August 15, 2021	Approved
TestCentric Runner for NUnit 2.0.0-alpha1	125	Thursday, July 1, 2021	Approved
testcentric-gui 1.7.0	92	Saturday, September 28, 2024	Approved
TestCentric Runner for NUnit 1.6.4	1057	Friday, December 2, 2022	Approved
TestCentric Runner for NUnit 1.6.3	182	Monday, August 1, 2022	Approved
TestCentric Runner for NUnit 1.6.2	628	Thursday, March 25, 2021	Approved
TestCentric Runner for NUnit 1.6.1	230	Sunday, January 17, 2021	Approved
TestCentric Runner for NUnit 1.6.0	159	Monday, January 11, 2021	Approved
TestCentric Runner for NUnit 1.5.3	155	Thursday, December 24, 2020	Approved
TestCentric Runner for NUnit 1.5.2	169	Thursday, December 17, 2020	Approved
TestCentric Runner for NUnit 1.5.1	148	Tuesday, December 15, 2020	Approved
TestCentric Runner for NUnit 1.5.0	140	Wednesday, December 9, 2020	Approved
TestCentric Runner for NUnit 1.4.1	288	Friday, September 4, 2020	Approved
TestCentric Runner for NUnit 1.4.0	472	Friday, May 1, 2020	Approved
TestCentric Runner for NUnit 1.3.3	205	Saturday, April 18, 2020	Approved
TestCentric Runner for NUnit 1.3.3-rc1	156	Friday, April 17, 2020	Approved
TestCentric Runner for NUnit 1.3.2	237	Tuesday, April 7, 2020	Approved
TestCentric Runner for NUnit 1.3.1	265	Saturday, March 7, 2020	Approved
TestCentric Runner for NUnit 1.3.0	212	Tuesday, February 25, 2020	Approved
TestCentric Runner for NUnit 1.2.0	226	Sunday, February 16, 2020	Approved
TestCentric Runner for NUnit 1.1.0	414	Saturday, November 9, 2019	Approved
TestCentric Runner for NUnit 1.0.1	293	Friday, August 16, 2019	Approved
TestCentric Runner for NUnit 1.0.0	269	Saturday, July 27, 2019	Approved
TestCentric Runner for NUnit 1.0-beta4	212	Wednesday, July 17, 2019	Exempted
TestCentric Runner for NUnit 1.0-beta3	181	Sunday, July 14, 2019	Exempted
TestCentric Runner for NUnit 1.0-beta2	214	Thursday, May 30, 2019	Exempted
TestCentric Runner for NUnit 1.0-beta	217	Saturday, April 13, 2019	Exempted
TestCentric Runner for NUnit 1.0-alpha4	228	Saturday, April 6, 2019	Exempted
TestCentric Runner for NUnit 1.0-alpha3	217	Wednesday, February 27, 2019	Exempted
TestCentric Runner for NUnit 1.0-alpha2	233	Tuesday, November 13, 2018	Exempted
TestCentric Runner for NUnit 1.0-alpha1	243	Friday, August 3, 2018	Exempted

Release Notes

https://raw.githubusercontent.com/TestCentric/testcentric-gui/master/CHANGES.txt

Dependencies

This package has no dependencies.

Discussion for the TestCentric Runner for NUnit Package

Ground Rules:

This discussion is only about TestCentric Runner for NUnit and the TestCentric Runner for NUnit package. If you have feedback for Chocolatey, please contact the Google Group.
This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
Tell us what you love about the package or TestCentric Runner for NUnit, or tell us what needs improvement.
Share your experiences with the package, or extra configuration or gotchas that you've found.
If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.

Resources

Events

Courses

9,836

156

17 Apr 2020

TestCentric Runner for NUnit

TestCentric Runner for NUnit 1.3.3-rc1

Some Checks Have Failed or Are Not Yet Complete

Deployment Method: Individual Install, Upgrade, & Uninstall

Deployment Method:

1. Enter Your Internal Repository Url

2. Setup Your Environment

1. Ensure you are set for organizational deployment

2. Get the package into your environment

3. Copy Your Script

4. If applicable - Chocolatey configuration/installation

Features

Prerequisites

Ground Rules: