Step 1: Review Your Packages

Step 2: Choose Your Integration Method

Step 3: Copy Your Script or Download Config

Option 1: Copy Script

Option 2: Download Config

Step 4: Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the packages and push them to a repository
  Download Packages

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the packages:
  Download Packages
- Follow manual internalization instructions
Package Internalizer (C4B)
- Run: (additional options)
- For package and dependencies run:
- Automate package internalization

Step 5: Copy Your Script

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###

#### We initialize a few things that are needed by this script - there are no other requirements.
$ErrorActionPreference = "Stop"

#### Set TLS 1.2 (3072) as that is the minimum required by various up-to-date repositories.
#### Use integers because the enumeration value for TLS 1.2 won't exist
#### in .NET 4.0, even though they are addressable if .NET 4.5+ is
#### installed (.NET 4.5 is an in-place upgrade).
[System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072

#### We use this variable for future REST calls.
$RequestArguments = @{
    UseBasicParsing = $true
}

## 2. TOP LEVEL VARIABLES ##

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# $NugetRepositoryCredential = [PSCredential]::new(
#     "username",
#     ("password" | ConvertTo-SecureString -AsPlainText -Force)
# )
# $RequestArguments.Credential = $NugetRepositoryCredential

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it
$ChocolateyDownloadUrl = "$($NugetRepositoryUrl.TrimEnd('/'))/package/chocolatey.2.4.0.nupkg"

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# $ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

#### Download the Nupkg, appending .zip to the filename to handle archive cmdlet limitations
if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    $TempDirectory = Join-Path $env:Temp "chocolateyInstall"
    if (-not (Test-Path $TempDirectory -PathType Container)) {
        $null = New-Item -Path $TempDirectory -ItemType Directory
    }
    $DownloadedNupkg = Join-Path $TempDirectory "$(Split-Path $ChocolateyDownloadUrl -Leaf).zip"
    Invoke-WebRequest -Uri $ChocolateyDownloadUrl -OutFile $DownloadedNupkg @RequestArguments

    #### Extract the Nupkg, and run the chocolateyInstall script
    if (Get-Command Microsoft.PowerShell.Archive\Expand-Archive -ErrorAction SilentlyContinue) {
        Microsoft.PowerShell.Archive\Expand-Archive -Path $DownloadedNupkg -DestinationPath $TempDirectory -Force
    } else {
        # PowerShell versions <4.0 do not have this function available
        try {
            $shellApplication = New-Object -ComObject Shell.Application
            $zipPackage = $shellApplication.NameSpace($DownloadedNupkg)
            $destinationFolder = $shellApplication.NameSpace($TempDirectory)
            $destinationFolder.CopyHere($zipPackage.Items(), 0x10)
        } catch {
            Write-Warning "Unable to unzip package using built-in compression."
            throw $_
        }
    }

    & $(Join-Path $TempDirectory "tools\chocolateyInstall.ps1")
}

if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    refreshenv
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# choco feature enable -n useFipsCompliantChecksums

### b. Apply Recommended Configuration ###
#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
choco config set --name cacheLocation --value C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
choco config set --name commandExecutionTimeoutSeconds --value 14400

#### Turn off download progress when running choco through integrations
choco feature disable --name showDownloadProgress

### c. Sources ###
#### Remove the default community package repository source
choco source list --limitoutput | ConvertFrom-Csv -Header 'Name', 'Location' -Delimiter '|' | ForEach-Object {
    if ($_.Location -eq 'https://community.chocolatey.org/api/v2/') {
        choco source remove -n $_.Name
    }
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
if ($NugetRepositoryCredential) {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --user $NugetRepositoryCredential.UserName --password $NugetRepositoryCredential.GetNetworkCredential().Password --priority 1
} else {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --priority 1
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
choco upgrade chocolatey --confirm

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
choco install chocolatey-license --source $NugetRepositoryUrl --confirm

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco source disable --name chocolatey.licensed
} else {
    Write-Warning "Not disabling 'chocolatey.licensed' feed, as Chocolatey-License has not been installed."
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco install chocolatey.extension --source $NugetRepositoryUrl --confirm
} else {
    Write-Warning "Not installing 'chocolatey.extension', as Chocolatey-License has not been installed."
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
choco feature disable --name showNonElevatedWarnings
choco feature enable --name useBackgroundService
choco feature enable --name useBackgroundServiceWithNonAdministratorsOnly
choco feature enable --name allowBackgroundServiceUninstallsFromUserInstallsOnly
choco config set --name allowedBackgroundServiceCommands --value "install,upgrade,uninstall"

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if ($ChocolateyCentralManagementUrl) {
    choco install chocolatey-agent --source $NugetRepositoryUrl --confirm
    choco config set --name CentralManagementServiceUrl --value $ChocolateyCentralManagementUrl
    if ($ChocolateyCentralManagementClientSalt) {
        choco config set --name centralManagementClientCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementClientSalt
    }
    if ($ChocolateyCentralManagementServiceSalt) {
        choco config set --name centralManagementServiceCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementServiceSalt
    }
    choco feature enable --name useChocolateyCentralManagement
    choco feature enable --name useChocolateyCentralManagementDeployments
}

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. chocolatey.chocolatey
##### You will require the chocolatey.chocolatey collection to be installed
##### on all machines using this playbook.
##### Please see https://github.com/chocolatey/chocolatey-ansible/#installing-the-collection-from-ansible-galaxy

- name: Install and Configure Chocolatey
  hosts: all

## 2. TOP LEVEL VARIABLES ##
  vars:

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
    nuget_repository_url: INTERNAL REPO URL

### b. Internal Repository Credential ###
#### If required, add the repository access credential here and
#### uncomment lines with source_username and source_password below
#    nuget_repository_username: username
#    nuget_repository_password: password

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#    chocolatey_central_management_url: https://chocolatey-central-management:24020/ChocolateyManagementService

#### ii. If using a Client Salt, add it here
#    chocolatey_central_management_client_salt: clientsalt

#### iii. If using a Service Salt, add it here
#    chocolatey_central_management_service_salt: servicesalt

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

  tasks:
  - name: Install chocolatey
    win_chocolatey:
      name: chocolatey
      source: ""{{ nuget_repository_url }}""
      # source_username: ""{{ nuget_repository_username }}""
      # source_password: ""{{ nuget_repository_password }}""

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#   - name: Enable FIPS compliance
#     win_chocolatey_feature:
#       name: useFipsCompliantChecksums
#       state: enabled

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
  - name: Set the cache location
    win_chocolatey_config:
      name: cacheLocation
      state: present
      value: C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
  - name: Set the command execution timeout
    win_chocolatey_config:
      name: commandExecutionTimeoutSeconds
      state: present
      value: 14400

#### Turn off download progress when running choco through integrations
  - name: Disable showing download progress
    win_chocolatey_feature:
      name: showDownloadProgress
      state: disabled

### c. Sources ###
#### Remove the default community package repository source
  - name: Remove Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey
      state: absent

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here
#### NOTE: This EXAMPLE may require changes
  - name: Add Internal Repository
    win_chocolatey_source:
      name: ChocolateyInternal
      state: present
      source: {{ nuget_repository_url }}
      # source_username: {{ nuget_repository_username }}
      # source_password: {{ nuget_repository_password }}
      priority: 1

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
  - name: Upgrade Chocolatey
    win_chocolatey:
      name: chocolatey
      state: latest

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.
### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
  - name: Install Chocolatey License
    win_chocolatey:
      name: chocolatey-license
      source: ChocolateyInternal
      state: latest

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
  - name: Disable Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey.licensed
      state: disabled

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
  - name: Install Chocolatey Extension
    win_chocolatey:
      name: chocolatey.extension
      source: ChocolateyInternal
      state: latest

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
  - name: Hide not-elevated warnings
    win_chocolatey_feature:
      name: showNonElevatedWarnings
      state: disabled

  - name: Use background mode for self-service
    win_chocolatey_feature:
      name: useBackgroundService
      state: enabled

  - name: Use background service for non-admins
    win_chocolatey_feature:
      name: useBackgroundServiceWithNonAdministratorsOnly
      state: enabled

  - name: Allow background uninstallation for user installs
    win_chocolatey_feature:
      name: allowBackgroundServiceUninstallsFromUserInstallsOnly
      state: enabled

  - name: Set allowed background service commands
    win_chocolatey_config:
      name: backgroundServiceAllowedCommands
      state: present
      value: install,upgrade,uninstall

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
  - name: Install Chocolatey Agent
    when: chocolatey_central_management_url is defined
    win_chocolatey:
      name: chocolatey-agent
      source: ChocolateyInternal
      state: latest

  - name: Set the Central Management Service URL
    when: chocolatey_central_management_url is defined
    win_chocolatey_config:
      name: CentralManagementServiceUrl
      state: present
      value: {{ chocolatey_central_management_url }}

  - name: Set the Central Management Client Salt
    when: chocolatey_central_management_client_salt is defined
    win_chocolatey_config:
      name: centralManagementClientCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_client_salt }}

  - name: Set the Central Management Service Salt
    when: chocolatey_central_management_service_salt is defined
    win_chocolatey_config:
      name: centralManagementServiceCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_service_salt }}

  - name: Use Central Management
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagement
      state: enabled

  - name: Use Central Management Deployments
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagementDeployments
      state: enabled

See docs at https://docs.chef.io/resource_chocolatey_package.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### The Chocolatey resources are available with any recent version of Chef.
#### We utilise the Chocolatey recipe to install the Chocolatey binaries.
include_recipe "chocolatey"

## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# NugetRepositoryUsername = "username"
# NugetRepositoryPassword = "password"

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
ChocolateyNupkgUrl = "INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg",

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
node['chocolatey']['install vars'] = {
  'chocolateyDownloadUrl' => "#{ChocolateyNupkgUrl}",
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# chocolatey_feature 'useFipsCompliantChecksums' do
#   action :enable
# end

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolatey_config 'cacheLocation' do
  value 'C:\ProgramData\chocolatey\cache'
end

#### Increase timeout to at least 4 hours
chocolatey_config 'commandExecutionTimeoutSeconds' do
  value '14400'
end

#### Turn off download progress when running choco through integrations
chocolatey_feature 'showDownloadProgress' do
  action :disable
end

### c. Sources ###
#### Remove the default community package repository source
chocolatey_source 'chocolatey' do
  action :remove
end

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
chocolatey_source 'ChocolateyInternal' do
  source "#{NugetRepositoryUrl}"
  priority 1
  action   :add
end

execute 'ChocolateyInternal' do
  command "choco source add --name ChocolateyInternal -s #{NugetRepositoryUrl} -u=#{NugetRepositoryUsername} -p=#{NugetRepositoryPassword} --priority=1"
  only_if { NugetRepositoryUsername != nil || NugetRepositoryPassword != nil }
end

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
chocolatey_package 'chocolatey' do
  action :upgrade
  source "#{NugetRepositoryUrl}"
end

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
chocolatey_package 'chocolatey-license' do
  action :install
  source "#{NugetRepositoryUrl}"
end

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
chocolatey_source 'chocolatey.licensed' do
  action            :disable
end

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
chocolatey_package 'chocolatey.extention' do
  action     install
  source     "#{NugetRepositoryUrl}"
end

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolatey_feature 'showNonElevatedWarnings' do
  action :disable
end

chocolatey_feature 'useBackgroundService' do
  action :enable
end

chocolatey_feature 'useBackgroundServiceWithNonAdministratorsOnly' do
  action :enable
end

chocolatey_feature 'allowBackgroundServiceUninstallsFromUserInstallsOnly' do
  action :enable
end

chocolatey_config 'backgroundServiceAllowedCommands' do
  value 'install,upgrade,uninstall'
end

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
chocolatey_package 'chocolatey-agent' do
  action     install
  source     "#{NugetRepositoryUrl}"
  # user       "#{NugetRepositoryUsername}"
  # password   "#{NugetRepositoryPassword}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'CentralManagementServiceUrl' do
  value  "#{ChocolateyCentralManagementUrl}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'centralManagementClientCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementClientSalt}"
  only_if { ChocolateyCentralManagementClientSalt != nil }
end

chocolatey_config 'centralManagementServiceCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementServiceSalt}"
  only_if { ChocolateyCentralManagementServiceSalt != nil }
end

chocolatey_feature 'useChocolateyCentralManagement' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_feature 'useChocolateyCentralManagementDeployments' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.

If Applicable - Chocolatey Configuration/Installation


#requires -Modules cChoco
## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires chocolatey\cChoco DSC module to be installed on the machine compiling the DSC manifest
#### NOTE: This will need to be installed before running the DSC portion of this script
if (-not (Get-Module cChoco -ListAvailable)) {
    $null = Install-PackageProvider -Name NuGet -MinimumVersion 2.8.5.201 -Force
    if (($PSGallery = Get-PSRepository -Name PSGallery).InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy Trusted
    }
    Install-Module -Name cChoco
    if ($PSGallery.InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy $PSGallery.InstallationPolicy
    }
}

#### ii. Requires a hosted copy of the install.ps1 script
##### This should be available to download without authentication.
##### The original script can be found here: https://community.chocolatey.org/install.ps1

Configuration ChocolateyConfig {
## 2. TOP LEVEL VARIABLES ##
    param(
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
        $NugetRepositoryUrl      = "INTERNAL REPO URL",

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
        $ChocolateyNupkgUrl      = "INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg",

### c. Internal Repository Credential ###
#### If required, add the repository access credential here
#        $NugetRepositoryCredential = [PSCredential]::new(
#            "username",
#            ("password" | ConvertTo-SecureString -AsPlainText -Force)
#        ),

### d. Install.ps1 URL
#### The path to the hosted install script:
        $ChocolateyInstallPs1Url = "https://community.chocolatey.org/install.ps1"

### e. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#        $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService",

#### ii. If using a Client Salt, add it here
#        $ChocolateyCentralManagementClientSalt = "clientsalt",

#### iii. If using a Service Salt, add it here
#        $ChocolateyCentralManagementServiceSalt = "servicesalt"
    )
    Import-DscResource -ModuleName PSDesiredStateConfiguration
    Import-DscResource -ModuleName cChoco

    Node 'localhost' {
## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
        Environment chocoDownloadUrl {
            Name  = "chocolateyDownloadUrl"
            Value = $ChocolateyNupkgUrl
        }

        cChocoInstaller installChocolatey {
            DependsOn = "[Environment]chocoDownloadUrl"
            InstallDir = Join-Path $env:ProgramData "chocolatey"
            ChocoInstallScriptUrl = $ChocolateyInstallPs1Url
        }

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#        cChocoFeature featureFipsCompliance {
#            FeatureName = "useFipsCompliantChecksums"
#        }

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
        cChocoConfig cacheLocation {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "cacheLocation"
            Value      = "C:\ProgramData\chocolatey\cache"
        }

#### Increase timeout to at least 4 hours
        cChocoConfig commandExecutionTimeoutSeconds {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "commandExecutionTimeoutSeconds"
            Value      = 14400
        }

#### Turn off download progress when running choco through integrations
        cChocoFeature showDownloadProgress {
            DependsOn   = "[cChocoInstaller]installChocolatey"
            FeatureName = "showDownloadProgress"
            Ensure      = "Absent"
        }

### c. Sources ###
#### Remove the default community package repository source
        cChocoSource removeCommunityRepository {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name       = "chocolatey"
            Ensure     = "Absent"
        }

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here.
#### NOTE: This EXAMPLE may require changes
        cChocoSource addInternalSource {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name        = "ChocolateyInternal"
            Source      = $NugetRepositoryUrl
            Credentials = $NugetRepositoryCredential
            Priority    = 1
        }

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
        cChocoPackageInstaller updateChocolatey {
            DependsOn   = "[cChocoSource]addInternalSource", "[cChocoSource]removeCommunityRepository"
            Name        = "chocolatey"
            AutoUpgrade = $true
        }

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
        cChocoPackageInstaller chocolateyLicense {
            DependsOn = "[cChocoPackageInstaller]updateChocolatey"
            Name      = "chocolatey-license"
        }

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
        Script disableLicensedSource {
            DependsOn  = "[cChocoPackageInstaller]chocolateyLicense"
            GetScript  = {
                $Source = choco source list --limitoutput | `
                    ConvertFrom-Csv -Delimiter '|' -Header Name, Source, Disabled | `
                    Where-Object Name -eq "chocolatey.licensed"

                return @{
                    Result = if ($Source) {
                        [bool]::Parse($Source.Disabled)
                    } else {
                        Write-Warning "Source 'chocolatey.licensed' was not present."
                        $true  # Source does not need disabling
                    }
                }
            }
            SetScript  = {
                $null = choco source disable --name "chocolatey.licensed"
            }
            TestScript = {
                $State = [ScriptBlock]::Create($GetScript).Invoke()
                return $State.Result
            }
        }

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
        cChocoPackageInstaller chocolateyLicensedExtension {
            DependsOn = "[Script]disableLicensedSource"
            Name      = "chocolatey.extension"
        }

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
        cChocoFeature hideElevatedWarnings {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "showNonElevatedWarnings"
            Ensure      = "Absent"
        }

        cChocoFeature useBackgroundService {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundService"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceWithNonAdmins {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundServiceWithNonAdministratorsOnly"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceUninstallsForUserInstalls {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "allowBackgroundServiceUninstallsFromUserInstallsOnly"
            Ensure      = "Present"
        }

        cChocoConfig allowedBackgroundServiceCommands {
            DependsOn   = "[cChocoFeature]useBackgroundService"
            ConfigName = "backgroundServiceAllowedCommands"
            Value       = "install,upgrade,uninstall"
        }

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
        if ($ChocolateyCentralManagementUrl) {
            cChocoPackageInstaller chocolateyAgent {
                DependsOn = "[cChocoPackageInstaller]chocolateyLicensedExtension"
                Name      = "chocolatey-agent"
            }

            cChocoConfig centralManagementServiceUrl {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                ConfigName = "CentralManagementServiceUrl"
                Value       = $ChocolateyCentralManagementUrl
            }

            if ($ChocolateyCentralManagementClientSalt) {
                cChocoConfig centralManagementClientSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementClientCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementClientSalt
                }
            }

            if ($ChocolateyCentralManagementServiceSalt) {
                cChocoConfig centralManagementServiceSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementServiceCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementServiceSalt
                }
            }

            cChocoFeature useCentralManagement {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagement"
                Ensure      = "Present"
            }

            cChocoFeature useCentralManagementDeployments {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagementDeployments"
                Ensure      = "Present"
            }
        }
    }
}

# If working this into an existing configuration with a good method for
$ConfigData = @{
    AllNodes = @(
        @{
            NodeName                    = "localhost"
            PSDscAllowPlainTextPassword = $true
        }
    )
}

try {
    Push-Location $env:Temp
    $Config = ChocolateyConfig -ConfigurationData $ConfigData
    Start-DscConfiguration -Path $Config.PSParentPath -Wait -Verbose -Force
} finally {
    Pop-Location
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires puppetlabs/chocolatey module
####  See https://forge.puppet.com/puppetlabs/chocolatey


## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$_repository_url = 'INTERNAL REPO URL'

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
$_choco_download_url = 'INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg'

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $_chocolatey_central_management_url = 'https://chocolatey-central-management:24020/ChocolateyManagementService'

#### ii. If using a Client Salt, add it here
# $_chocolatey_central_management_client_salt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $_chocolatey_central_management_service_salt = 'servicesalt'


## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
### Note: `chocolatey_download_url is completely different than normal
###  source locations. This is directly to the bare download url for the
###  chocolatey.nupkg, similar to what you see when you browse to
###  https://community.chocolatey.org/api/v2/package/chocolatey
class {'chocolatey':
  chocolatey_download_url => $_choco_download_url,
  use_7zip                => false,
}


## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations

#chocolateyfeature {'useFipsCompliantChecksums':
#  ensure => enabled,
#}

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolateyconfig {'cacheLocation':
  value => 'C:\ProgramData\chocolatey\cache',
}

#### Increase timeout to at least 4 hours
chocolateyconfig {'commandExecutionTimeoutSeconds':
  value => '14400',
}

#### Turn off download progress when running choco through integrations
chocolateyfeature {'showDownloadProgress':
  ensure => disabled,
}

### c. Sources ###
#### Remove the default community package repository source
chocolateysource {'chocolatey':
  ensure   => absent,
  location => 'https://community.chocolatey.org/api/v2/',
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE requires changes
chocolateysource {'internal_chocolatey':
  ensure             => present,
  location           => $_repository_url,
  priority           => 1,
  username           => 'optional',
  password           => 'optional,not ensured',
  bypass_proxy       => true,
  admin_only         => false,
  allow_self_service => false,
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/

package {'chocolatey':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}


## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/guides/organizations/organizational-deployment-guide#exercise-4-create-a-package-for-the-license

# TODO: Add resource for installing/ensuring the chocolatey-license package
package {'chocolatey-license':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
## Disabled sources still need all other attributes until
## https://tickets.puppetlabs.com/browse/MODULES-4449 is resolved.
## Password is necessary with user, but not ensurable, so it should not
## matter what it is set to here. If you ever do get into trouble here,
## the password is your license GUID.
chocolateysource {'chocolatey.licensed':
  ensure   => disabled,
  priority => '10',
  user     => 'customer',
  password => '1234',
  require  => Package['chocolatey-license'],
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
package {'chocolatey.extension':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
  require  => Package['chocolatey-license'],
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolateyfeature {'showNonElevatedWarnings':
  ensure => disabled,
}

chocolateyfeature {'useBackgroundService':
  ensure => enabled,
}

chocolateyfeature {'useBackgroundServiceWithNonAdministratorsOnly':
  ensure => enabled,
}

chocolateyfeature {'allowBackgroundServiceUninstallsFromUserInstallsOnly':
  ensure => enabled,
}

chocolateyconfig {'backgroundServiceAllowedCommands':
  value => 'install,upgrade,uninstall',
}

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if $_chocolatey_central_management_url {
  package {'chocolatey-agent':
    ensure   => latest,
    provider => chocolatey,
    source   => $_repository_url,
    require  => Package['chocolatey-license'],
  }

  chocolateyconfig {'CentralManagementServiceUrl':
    value   => $_chocolatey_central_management_url,
  }

  if $_chocolatey_central_management_client_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  if $_chocolatey_central_management_service_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  chocolateyfeature {'useChocolateyCentralManagement':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }

  chocolateyfeature {'useChocolateyCentralManagementDeployments':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }
}

Need Help? View our docs or file an issue.

There is already a version of this package in your Script Builder

Current Version	New Version

Downloads:

2,245

Downloads of v 1.03:

198

Last Update:

25 Jun 2019

Package Maintainer(s):

Schroedingers-Cat

Software Author(s):

DMGAudio

Tags:

tracklimit vst aax audio mixing admin trial

TrackLimit (Install)

This is not the latest version of TrackLimit (Install) available.

1.03 | Updated: 25 Jun 2019

Downloads:

2,245

Downloads of v 1.03:

198

Maintainer(s):

Schroedingers-Cat

Software Author(s):

DMGAudio

Tags:

tracklimit vst aax audio mixing admin trial

TrackLimit (Install) 1.03

This is not the latest version of TrackLimit (Install) available.

Legal Disclaimer: Neither this package nor Chocolatey Software, Inc. are affiliated with or endorsed by DMGAudio. The inclusion of DMGAudio trademark(s), if any, upon this webpage is solely to identify DMGAudio goods or services and not for commercial purposes.

All Checks are Passing

3 Passing Tests

Show Checks

Validation Testing Passed

Verification Testing Passed

Details

Scan Testing Successful:

No detections found in any package files

Details

Learn More

Deployment Method: Individual Install, Upgrade, & Uninstall

To install TrackLimit (Install), run the following command from the command line or from PowerShell:

To upgrade TrackLimit (Install), run the following command from the command line or from PowerShell:

To uninstall TrackLimit (Install), run the following command from the command line or from PowerShell:

NOTE

This applies to both open source and commercial editions of Chocolatey.

1. Enter Your Internal Repository Url

(this should look similar to https://community.chocolatey.org/api/v2/)

2. Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the package and push it to a repository Download

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the package:
  Download
- Follow manual internalization instructions

Package Internalizer (C4B)

Run: (additional options)

choco download tracklimit --internalize --version=1.03 --source=https://community.chocolatey.org/api/v2/

For package and dependencies run:

choco push --source="'INTERNAL REPO URL'"

Automate package internalization

3. Copy Your Script

choco upgrade tracklimit -y --source="'INTERNAL REPO URL'" --version="'1.03'" [other options]

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:


choco upgrade tracklimit -y --source="'INTERNAL REPO URL'" --version="'1.03'" 
$exitCode = $LASTEXITCODE

Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
  Exit 0
}

Exit $exitCode


- name: Install tracklimit
  win_chocolatey:
    name: tracklimit
    version: '1.03'
    source: INTERNAL REPO URL
    state: present

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.


chocolatey_package 'tracklimit' do
  action    :install
  source   'INTERNAL REPO URL'
  version  '1.03'
end

See docs at https://docs.chef.io/resource_chocolatey_package.html.


cChocoPackageInstaller tracklimit
{
    Name     = "tracklimit"
    Version  = "1.03"
    Source   = "INTERNAL REPO URL"
}

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.


package { 'tracklimit':
  ensure   => '1.03',
  provider => 'chocolatey',
  source   => 'INTERNAL REPO URL',
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

4. If applicable - Chocolatey configuration/installation

See infrastructure management matrix for Chocolatey configuration elements and examples.

Package Approved

This package was approved as a trusted package on 09 Nov 2019.

Description

TrackLimit

Description

TrackLimit is a fully featured wideband limiter with intelligent dual-stage handling of transients and dynamics.
Just click and drag the threshold to hear your sound come alive.

Package Specific

Package Parameters

The following package parameters can be set:

/Vst2Path: - Installation path of the VST2 version
/Vst2x86Path: - Installation path of the x86 VST2 version on x64 CPU architecture
/Vst3Path: - Installation path of the VST3 version
/Vst3x86Path: - Installation path of the x86 VST3 version on x64 CPU architecture
/CompanyPath: - Path of the company to put all program files in. Override if you want to have all the program files at a custom location.
/InstallerPath: - Do not download the installer from the official website and use the one passed with this argument instead. Use it, if you don't have an internet connection at your computer.

You must pass the package parameters like this:

choco install tracklimit --package-parameters "'/Vst2x86Path:${env:CommonProgramFiles(x86)}\VST2\DMGAudio '"

Files

tools\chocolateyfunctions.ps1

# Installer Functions
# Comments to this script have been added upon request by the chocolatey community reviewer
function CreateShortcut ($shortcutObject) {
  if($shortcutObject.execute -eq $true) {
    $tempShortcutPathAndName = "" + $shortcutObject.linkPath + "\" + $shortcutObject.linkName
    If (-not(Test-Path -Path $shortcutObject.destPath)) {
      Write-Debug "Target path does not exist. Creating it first."
      New-Item -ItemType Directory -Force -Path $shortcutObject.destPath
    }
    Write-Debug "This is the Shortcut Full Path:"; Write-Debug $tempShortcutPathAndName
    Install-ChocolateyShortcut -ShortcutFilePath $tempShortcutPathAndName -TargetPath $shortcutObject.destPath
  }
}

function CreateSymlink ($symlinkObject) {
  if($symlinkObject.execute -eq $true) {
    $tempSymlinkPathAndName = $symlinkObject.linkPath + "\" + $symlinkObject.linkName
    If ($tempSymlinkPathAndName -eq $symlinkObject.destPath) {
      Write-Error ("Target and Destination Paths of an overwritten parameter and an internal parameter are the same.")
      return
    }
    if (Test-Path -Path $symlinkObject.destPath) {
      Write-Debug ("Destination Path " + $symlinkObject.destPath + " already exists.")
    } else {
      Write-Debug ("Creating " + $symlinkObject.destPath)
      New-Item $symlinkObject.destPath -ItemType Directory -Force
    }
    if (Test-Path -Path $tempSymlinkPathAndName) {
      if((Get-Item $tempSymlinkPathAndName).Attributes.ToString() -Match "ReparsePoint") {
        Write-Debug ("Link Path " + $tempSymlinkPathAndName + " already exists as SymbolicLink. Will overwrite SymbolicLink.")
      } else {
        Write-Debug ("Link Path " + $tempSymlinkPathAndName + " already exists. Will move to destination path and link afterwards.")
        If (Test-Path $tempSymlinkPathAndName -pathType leaf) {
          Write-Debug ("Link Path " + $tempSymlinkPathAndName + " is a file.")
          Move-Item -Path $tempSymlinkPathAndName -Destination $symlinkObject.destPath -Force
        } ElseIf (Test-Path $tempSymlinkPathAndName -pathType container) {
          Write-Debug ("Link Path " + $tempSymlinkPathAndName + " is a folder.")
          Move-Item -Path "$tempSymlinkPathAndName\*" -Destination $symlinkObject.destPath -Force
          Remove-Item -Path "$tempSymlinkPathAndName"
        } Else {
          Write-Error ("Link Path " + $tempSymlinkPathAndName + " is neither file nor folder.")
          return
        }
      }
    }
    Write-Debug ("Linking " + $tempSymlinkPathAndName + " to " + $symlinkObject.destPath)
    New-Item -Type SymbolicLink -Path "$tempSymlinkPathAndName" -Value $symlinkObject.destPath -Force
  }
}

function CreateRegKey ($regKeyObject) {
  If ([string]::IsNullOrWhiteSpace($regKeyObject.path)) {
    Write-Warning ("Given Registry Object Path is NULL.")
    return
  }

  if($regKeyObject.execute -eq $true) {
    if($regKeyObject.key -eq '') {
      New-Item -Path ${regKeyObject}.path -Value ${regKeyObject}.value -Force
    } else {
      if (Test-Path ${regKeyObject}.path) { } else { New-Item ${regKeyObject}.path -force }
      New-ItemProperty -Type String -Path ${regKeyObject}.path -Name ${regKeyObject}.key -Value ${regKeyObject}.value -force
    }
  }
}

function CreateRegKeyFromFile ($regKeyFileObject) {
  if($regKeyFileObject.execute -eq $true) {
    Write-Debug ("Creating registry entry from file " + $env:ChocolateyPackageFolder + "\" + $regKeyFileObject.path)
    regedit.exe /S ($env:ChocolateyPackageFolder + "\" + $regKeyFileObject.path)
  }
}

<#
.SYNOPSIS
Create the component list that will be parsed to the installer.

.DESCRIPTION
Create the component list that will be parsed to the installer. A component is a tickable box in an installer.
The resulting component list depends on the 'execute' bool that should be set before handing the installer
component into this function.

.PARAMETER instParamObject
An installer parameter object/action defined in the chocolateyvariables.ps1.

.NOTES
Comment added because reviewer asked to do so.
#>
function CreateInstallerParameters ($instParamObject) {
  if($instParamObject.execute -eq $true) {
    Write-Debug "Checking Installer Components for: "; Write-Debug $instParamObject.value
    $global:installerComponents += $instParamObject.value
    $global:installerComponents += ","
    Write-Debug ("These are the current installerComponents: " + $installerComponents + ".")
  }
}

function CopyPackageRessources ($PackageResourcePathObject) {
  if($PackageResourcePathObject.execute -eq $true) {
    Write-Debug ("Preparing Package Ressource Path for: " + $PackageResourcePathObject.value + ".")
    $tempPath = ($env:ChocolateyPackageFolder + "\" + ($PackageResourcePathObject.value).ToString())
    if((Test-Path $tempPath) -eq $false) {
      Write-Debug ("The resource object " + $PackageResourcePathObject.value + " does not exist.")
      return
    }
    # We create the target directory first as Copy-Item behaves differently when the target path doesn't exist as directory
    New-Item $PackageResourcePathObject.installPath -ItemType Directory -Force
    if($tempPath -Match "zip") {
      Get-ChocolateyUnzip -FileFullPath "$tempPath" -Destination $PackageResourcePathObject.installPath
    } else {
      Move-Item -Path $tempPath -Destination $PackageResourcePathObject.installPath -Force -Recurse
      Write-Debug ("Copying all files from Package\" + $PackageResourcePathObject.value + " to " + $PackageResourcePathObject.installPath + ".")
    }
  }
}

function CreateTxtFiles ($txtFileObject) {
  if($txtFileObject.execute -eq $true) {
    Write-Debug ("Creating txt file in " + $txtFileObject.key + " with the content: " + $txtFileObject.value)
    Remove-Item $txtFileObject.key -ErrorAction SilentlyContinue
    New-Item $txtFileObject.key -ItemType file -Force
    [System.IO.File]::WriteAllLines($txtFileObject.key, $txtFileObject.value, (New-Object ("System.Text." + $txtFileObject.encoding + "Encoding") $txtFileObject.bom))
  }
}

<#
.SYNOPSIS
Check for settings of previously run installer
#>
function CheckPreviousInstallerSettings() {
  $registryKey = "HKLM:\\SOFTWARE\chocolatey\$env:ChocolateyPackageName"
  $registryNames = @("CompanyPath", "Vst64Path", "Vst32Path", "UserFolderPath", "InstallerComponents")

  If (!(Test-Path -Path $registryKey)) {
    Write-Debug ("Registry key $registryKey is NULL")
    return
  }
  Foreach ($name in $registryNames) {
    $value = Get-ItemProperty -Path $registryKey -ErrorAction SilentlyContinue | Select-Object -ExpandProperty $name -ErrorAction SilentlyContinue
    If (![string]::IsNullOrWhiteSpace($value)) {
      If ($name -eq "CompanyPath") {
        $global:prevCompanyPath = $value
      }
      If ($name -eq "Vst64Path") {
        $global:prevVst64Path = $value
      }
      If ($name -eq "Vst32Path") {
        $global:prevVst32Path = $value
      }
      If ($name -eq "UserFolderPath") {
        $global:prevUserFolderPath = $value
      }
      If ($name -eq "InstallerComponents") {
        $global:prevInstallerComponents = $value
      }
      Write-Debug ("Value found: " + $value)
    }
  }
}

<#
.SYNOPSIS
Checks for default installer values
#>
function GetDefaultValues () {
  $newDefaultPath = GetDefaultVst2Directory(64)
  If (![string]::IsNullOrWhiteSpace($newDefaultPath)) {
    Write-Debug("Default VST2 64 Path found: " + $newDefaultPath)
    $global:vst2DefaultPath = $newDefaultPath
  }
  $newDefaultPath = GetDefaultVst2Directory(32)
  If (![string]::IsNullOrWhiteSpace($newDefaultPath)) {
    Write-Debug("Default VST2 32 Path found: " + $newDefaultPath)
    $global:vst2x86_64DefaultPath = $newDefaultPath
  }
}
<#
.SYNOPSIS
Picks one of the found default, previous and current installer settings

.DESCRIPTION
Picks one of the found default, previous and current installer settings. Priority is:
1. Package parameters (by checking for a given package parameter)
2. Previous parameters (by using the prev variable)
3. System default hint used by installer (by using the default variable)
4. Installer default (by doing nothing)

#>
function CheckPreviousInstallerSettingsAgainstParameters () {
  If ([string]::IsNullOrWhiteSpace($pp["Vst2Path"])) {
    If (![string]::IsNullOrWhiteSpace($vst2DefaultPath)) {
      Write-Debug("Overwriting Vst2Path with vst2DefaultPath: " + $vst2DefaultPath)
      $vst2Path = $vst2DefaultPath
    }
    If ($prevVst64Path) {
      Write-Debug("Overwriting Vst2Path with prevVst64Path: " + $prevVst64Path)
      $vst2Path = $prevVst64Path
    }
  }

  If ([string]::IsNullOrWhiteSpace($pp["Vst2x86Path"])) {
    If (![string]::IsNullOrWhiteSpace($vst2x86_64DefaultPath)) {
      Write-Debug("Overwriting Vst2x86Path with vst2x86_64DefaultPath: " + $vst2x86_64DefaultPath)
      $vst2x86_64Path = $vst2x86_64DefaultPath
    }
    If ($prevVst32Path) {
      Write-Debug("Overwriting Vst2x86Path with prevVst32Path: " + $prevVst32Path)
      $vst2x86_64Path = $prevVst32Path
    }
  }

  If ($pp["CompanyPath"] -eq $false) {
    # Some installers have an automatic detection mechanism for this path next to a default
    Write-Debug "Checking if automatic install path detection is implemented ..."
    if (Get-Command InstallerCompanyPathAutomaticDetection -errorAction SilentlyContinue) {
      Write-Debug "Method has been implemented!"

      InstallerCompanyPathAutomaticDetection
      If ($autoInstDetectionCompanyPath) {
        Write-Debug("AutoInstDetectionCompanyPath: " + $autoInstDetectionCompanyPath)
        $companyPath = $autoInstDetectionCompanyPath
      }
    }

    If ($prevCompanyPath) {
      Write-Debug("prevCompanyPath: " + $prevCompanyPath)
      $companyPath = $prevCompanyPath
    }
  }

  If ([string]::IsNullOrWhiteSpace($pp["UserFolderPath"])) {
    If ($prevUserFolderPath) {
      Write-Debug("UserFolderPath: " + $prevUserFolderPath)
      $userFolderPath = $prevUserFolderPath
    }
  }
  # If the user has not given any package parameters to control the installer components (-> expects default)
  # but there has been found a previous configuration of installed components, we ignore the default configuration
  # and use the previous configuration
  If (![string]::IsNullOrWhiteSpace($global:prevInstallerComponents)) {
    If ( $pp["NoVst2x86"] -Or $pp["NoVst2x64"] -Or $pp["NoVst3x86"] -Or $pp["NoVst3x64"] -Or $pp["NoAaxx86"] -Or $pp["NoAaxx64"] -Or $pp["NoRtas"] -Or $pp["NoPresets"] -Or $pp["NoNks"] ) {
      Write-Debug ("Components: Previous configuration found but package parameters override have been set so ignoring previous configuration.")
    } else {
      $global:installerComponents = $global:prevInstallerComponents
      Write-Debug ("Components: Previous configuration found, using for installation now.")
    }
  }
}

<#
.SYNOPSIS
Checks if a given path is a kind of link and returns its value resolved

.DESCRIPTION
Checks if a given path is a kind of link and returns its value resolved. Also returns the path if it's a directory or a file. Returns $null if it doesn't exist.

.NOTES
Comment added because reviewer asked to do so.
#>
function ResolvePath($target) {
  $targetpath = $null

  If (!(Test-Path $target)) {
    Write-Debug ("Ended prematurely")
    Write-Debug ("$targetpath")
    return $targetpath
  }

  if($target.EndsWith(".lnk")) {
    $sh = new-object -com wscript.shell
    $fullpath = resolve-path $target
    $targetpath = $sh.CreateShortcut($fullpath).TargetPath
    Write-Debug ("Target ended with lnk and is " + "$targetpath")
    return $targetpath
  }

  If ((Get-ItemPropertyValue -Path $target -Name LinkType) -eq "SymbolicLink") {
    return $targetpath = Get-ItemPropertyValue -Path $target -Name Target
  } ElseIf (Test-Path $target -pathType leaf) {
    return $targetpath = (Get-Item $target).DirectoryName
  } ElseIf (Test-Path $target -pathType container) {
    return $targetpath = $target
  }

  Write-Debug ($targetpath)
  return $targetpath
}

<#
.SYNOPSIS
Checks if given an array of paths has an entry with a kind of link and returns teh first value resolved

.DESCRIPTION
Checks if a given an array of paths it checks for link and returns the first value resolved. Also returns the first path if it's a directory or a file. Returns $null if nothing exists.

.NOTES
Comment added because reviewer asked to do so.
#>
function ResolvePaths([String[]] $Paths) {
  Foreach ($path in $Paths) {
    If (ResolvePath($path)) {
      Write-Debug ("Successfully resolved path " + "$path")
      return ResolvePath($path)
      break
    }
  }
  Write-Debug ("Returning NULL path ")
  return $null
}

<#
.SYNOPSIS
Returns a given registry key/name's value

.DESCRIPTION
Returns a given registry key/name's value

.NOTES
Comment added because reviewer asked to do so.
#>
function ResolveRegPath($reg) {
  If (!(Test-Path -Path $reg.key)) {
    Write-Debug ("Given key is NULL")
    return $null
  }
  $value = Get-ItemProperty -Path $reg.key -ErrorAction SilentlyContinue | Select-Object -ExpandProperty $reg.name -ErrorAction SilentlyContinue
  If ([string]::IsNullOrWhiteSpace($value)) {
    Write-Debug ("Given key's name is NULL")
    return $null
  }

  Write-Debug ("Value found: " + $value)
  return $value
}

<#
.SYNOPSIS
Try to find the default VST2 directory

.DESCRIPTION
Try to find the default VST2 directory

.PARAMETER bitToCheck
Wether to find the default 32 bit or 64 bit directory

.NOTES
Comment added because reviewer asked to do so.
#>
function GetDefaultVst2Directory ($bitToCheck) {
  If ($bitToCheck -eq 32) {
    $defaultRegBasePath = "HKLM:\\SOFTWARE\WOW6432Node\VST"
    $installerDefaultRegPath = $vst2x86_64PathReg
  } ElseIf ($bitToCheck -eq 64) {
    $defaultRegBasePath = "HKLM:\\SOFTWARE\VST"
    $installerDefaultRegPath = $vst2PathReg
  }

  $returnVst2Path = $null

  If (Test-Path -Path $defaultRegBasePath) {
    $newVst2Path = Get-ItemProperty -Path $defaultRegBasePath -ErrorAction SilentlyContinue | Select-Object -ExpandProperty VstPluginsPath -ErrorAction SilentlyContinue
    If (![string]::IsNullOrWhiteSpace($newVst2Path)) {
      If ($vst2AddSubfolder) {
        $newVst2Path += "\$companyPath"
      }
      $returnVst2Path = $newVst2Path
    }
  }

  If (![string]::IsNullOrWhiteSpace($installerDefaultRegPath.key)) {
    $newVst2Path = Get-ItemProperty -Path $installerDefaultRegPath.key -ErrorAction SilentlyContinue | Select-Object -ExpandProperty $installerDefaultRegPath.name -ErrorAction SilentlyContinue
    If (![string]::IsNullOrWhiteSpace($newVst2Path)) {
      $returnVst2Path = $newVst2Path
    }
  }

  return $returnVst2Path
}

function RunInstallerWithPackageParametersObject ($packageParameterObject) {
  $installerPathViaPP = (Test-Path $pp["InstallerPath"])
  ## Does the following check work for 32 bit installers??
  $installerEmbedded = ((Test-Path ($env:ChocolateyPackageFolder + "\" + $packageParameterObject.file)) -And ($packageParameterObject.file64 -ne $null) -And (Test-Path ($env:ChocolateyPackageFolder + "\" + $packageParameterObject.file64)))
  $installerDownload = (($packageParameterObject.url -ne $null) -Or ($packageParameterObject.url64 -ne $null))
  $installerDownloadExe = (($packageParameterObject.url -ne $null) -And ($packageParameterObject.url).EndsWith(".exe"))
  Write-Debug ("This is the InstallerPath Variable: " + $pp["InstallerPath"])
  Write-Debug ("Installer embedded path: " + ($env:ChocolateyPackageFolder + "\" + $packageParameterObject.file))
  Write-Debug ("Installer embedded path: " + ($env:ChocolateyPackageFolder + "\" + $packageParameterObject.file64))
  if(Test-Path variable:packageParameterObject.url]) {Write-Debug ("Installer url: " + $packageParameterObject.url)}
  if($installerDownloadExe -eq $true) {Write-Debug "Installer is exe"}

  if($installerPathViaPP -eq $true) {
    $packageParameterObject["file"] = $fileLocation
    Install-ChocolateyInstallPackage @packageParameterObject # https://chocolatey.org/docs/helpers-install-chocolatey-install-package
  }

  if($installerEmbedded -eq $true) {
    $packageParameterObject.file = ($env:ChocolateyPackageFolder + "\" + $packageParameterObject.file)
    $packageParameterObject.file64 = ($env:ChocolateyPackageFolder + "\" + $packageParameterObject.file64)
    Write-Debug ("Installer embedded path: " + $packageParameterObject.file)
    Install-ChocolateyInstallPackage @packageParameterObject
  }

  if($installerDownload -eq $true -And $installerPathViaPP -eq $false) {
    if($installerDownloadExe -eq $true) { "Installer is exe, running now..."
      Install-ChocolateyPackage @packageParameterObject # https://chocolatey.org/docs/helpers-install-chocolatey-package
    } else { Write-Debug "Installer inside zip"; Write-Debug ("UnzipLocation is: " + $packageParameterObject.unzipLocation)
      $packageParameterObject["file"] = $fileLocation
      Install-ChocolateyZipPackage @packageParameterObject
      Install-ChocolateyInstallPackage @packageParameterObject
    }
  }
}

function RemoveInstallerObjects ($packageParameterObject) {
  if($packageParameterObject.file) {
    if(Test-Path ($packageParameterObject.file) -ErrorAction Ignore){
      Remove-Item $packageParameterObject.file -Force -ErrorAction SilentlyContinue
    }
  }
  if($packageParameterObject.file64) {
    if(Test-Path ($packageParameterObject.file64) -ErrorAction Ignore){
      Remove-Item $packageParameterObject.file64 -Force -ErrorAction SilentlyContinue
    }
  }
}

function RemoveTemporaryFiles ($PackageResourcePathObject) {
  Write-Debug ("Deleting temp package files: " + $env:ChocolateyPackageFolder + "\" + $PackageResourcePathObject.value + " and" + $env:ChocolateyPackageFolder + "\" + $PackageResourcePathObject.value + ".txt")
  Remove-Item ($env:ChocolateyPackageFolder + "\" + $PackageResourcePathObject.value) -Force -ErrorAction SilentlyContinue
  Remove-Item ($env:ChocolateyPackageFolder + "\" + $PackageResourcePathObject.value + ".txt") -Force -ErrorAction SilentlyContinue
}

function HandlePackageArgs ($packageParameterObject) {
  if ($global:installerComponents) {
    If ($global:installerComponents.EndsWith(',')) {
      Write-Debug ("Components list ends with , - removing.")
      $global:installerComponents = $installerComponents.Substring(0,$installerComponents.Length-1)
    }
    $packageParameterObject["silentArgs"] += " /Components=$global:installerComponents"
  }
  Write-Debug "This are the silentArgs"; Write-Debug $packageParameterObject["silentArgs"]
}

# Creates txt file containing all zip files and where they have been copied to.
# Also checks whether extracted zip content should be uninstalled or not (.delete=$false).
function WriteUninstallData ($PackageResourcePathObject) {
  if($PackageResourcePathObject.delete -ne $false) {
    foreach($line in Get-Content ($env:ChocolateyPackageFolder + "\" + $PackageResourcePathObject.value + ".txt")) {
      Add-Content -Path ($env:ChocolateyPackageFolder + "\uninstall.txt") -Value ($PackageResourcePathObject.installPath + "\" + $line)
    }
  }
}

# Creates/Overwrites bit-aware variables, so x86 files can use the same path-var on both platforms
function CreateBitAwareVariables () {
  if($osBitness -eq 64) {
    $global:vst2x86BitAware = "$vst2x86_64Path"
    $global:vst3x86BitAware = "$vst3x86_64Path"
    $global:aaxx86BitAware  = "$aaxx86_64Path"
    $global:vst2x86PathRegBitAware = "$vst2x86_64PathReg"
  }
  if($osBitness -eq 32) {
    $global:vst2x86BitAware = "$vst2Path"
    $global:vst3x86BitAware = "$vst3Path"
    $global:aaxx86BitAware  = "$aaxPath"
    $global:vst2x86PathRegBitAware = "$vst2PathReg"
  }
}

# Uninstaller Functions
function Test-Registry ($path, $value) {
  try {
    Get-ItemProperty -Path $Path | Select-Object -ExpandProperty $Value -ErrorAction Stop | Out-Null
    return $true
  } catch {
    return $false
  }
}

function DeleteFolders ($folderPath) {
  if([string]::IsNullOrWhiteSpace($folderPath)) {
    Write-Debug "Path variable is null."
    return
  }
  if(Test-Path -path "$folderPath") {
    Write-Debug "$folderPath will be deleted."
    # "Archive" seems to be a lnk file
    if((Get-Item ($folderPath).ToString()).Attributes.ToString() -Match "Archive" ) {
      Remove-Item $folderPath -Force -Recurse
    } else {
      [System.IO.Directory]::Delete("$folderPath", $true)
    }
  }
}

# Checks, if a folder is empty and if true, deletes that folder. Also checks three levels upwards. -Force is not necessary.
function DeleteFoldersIfEmpty ($folderPath) {
  Write-Debug ("Checking " + $folderPath)
  if([string]::IsNullOrWhiteSpace($folderPath)) {
    Write-Debug "Path variable is null."
    return
  }
  if((Test-Path -Path "$folderPath") -eq $false) {
    Write-Debug "$folderPath does not exist."
    return
  }
  $parentFolder = (Get-ItemProperty $folderPath).Parent.FullName
  $parentParentFolder = (Get-ItemProperty $folderPath).Parent.Parent.FullName
  $folderList = "$folderPath", "$parentFolder", "$parentParentFolder"
  Foreach ($path in $folderList) {
    Write-Debug ("Checking if path exists and is empty: " + $path)
    if($path -ne '' -and $path -ne $null) {
      if(((Test-Path "$path") -and (Get-ChildItem "$path") -eq $null)) {
        Write-Debug "$path is empty and will be deleted."
        Remove-Item "$path"
      }
    }
  }
}

function DeleteDataFromTxtFile ($uninstallFile) {
  Foreach($path in Get-Content $uninstallFile) {
    If ([string]::IsNullOrWhiteSpace($path)) {
      return
    }
    Write-Debug ("About to delete " + $path)
    if(Test-Path $path -pathType leaf) {
      $directoryName = (Get-Item $path).DirectoryName
      Write-Debug "$path will be deleted."
      Remove-Item "$path" -Force
      DeleteFoldersIfEmpty($directoryName)
    }
    if(Test-Path $path -pathType container) {
      $parentDirectory = (Get-ItemProperty $path).Parent.FullName
      Write-Debug "$path will be deleted."
      #Remove-Item -Recurse -Force fails if folder contains a symlink -.-
      [System.IO.Directory]::Delete("$path", $true)
      DeleteFoldersIfEmpty($parentDirectory)
    }
  }
}

# Removes all registry entires in a given registry file from the registry
function DeleteRegKeysFromFile ($file) {
  if(Test-Path $file) {
    (Get-Content $file) -replace "^\[","[-" | out-file $file
    regedit.exe /S ($file)
  }
}

# Deletes a registry key or property, if it exists and is not marked as delete=$false
function DeleteRegKeyFromObjects ($regKey) {
  Write-Debug ("About to delete Registry Entry: " + $regKey.path + $regKey.key)
  if($regKey.ContainsKey("delete")) {
    return
  }
  If ([string]::IsNullOrWhiteSpace($regKey.path)) {
    Write-Debug("Given Registry Path is null or empty.")
    return
  }
  if((Test-Path -Path $regKey.path) -eq $false) {
    Write-Debug ("Registry Entry does not exist anymore.")
    return
  }
  if(($regKey.key -eq "")) {
    Write-Debug ("Deleting " + $regKey.path)
    Remove-Item -Path $regKey.path -Force
  }
  if ($regKey.key -ne "") {
    Write-Debug ("Deleting Key " + $regKey.key + " at Path " + $regKey.path)
    Remove-ItemProperty -Path $regKey.path -Name $regKey.key -Force -ErrorAction SilentlyContinue
  }

  If (([string]::IsNullOrWhiteSpace((Get-Item -Path $regKey.path | Get-ItemProperty))) -And ([string]::IsNullOrWhiteSpace((Get-ChildItem -Path $regKey.path)))) {
    Write-Debug ("Deleting orphaned key " + $regKey.path)
    Remove-Item -Path $regKey.path
  }
}

# Deletes a file, if it exists
function DeleteFile ($pathToFile) {
  Write-Debug ("Checking " + $pathToFile)
  if(Test-Path $pathToFile) {
    Write-Debug ("Deleting " + $pathToFile)
    Remove-Item $pathToFile -Force
  }
}

# Packaging functions
function CreateFileList ($packagePaths, $targetPath) {
  Remove-Item ($targetPath + ".txt") -ErrorAction SilentlyContinue
  Foreach ($path in $packagePaths) {
    #Add-Content -Path ($targetPath + ".txt") -Value (Get-ChildItem -Path "$path" -Recurse -Name) -Force
    Add-Content -Path ($targetPath + ".txt") -Value ((Get-Item -Path "$path").Name) -Force
  }
}
function CreateDataArchive ($packagePaths, $targetPath) {
  Compress-Archive $packagePaths $targetPath -CompressionLevel Optimal -Force
}

function CreateDataArchiveAndFileList ($packagePaths, $targetPath) {
  if ((Test-Path $targetPath) -eq $false ) {
    New-Item $targetPath -Force
    Remove-Item $targetPath -Force
  }
  CreateDataArchive $packagePaths $targetPath
  CreateFileList $packagePaths $targetPath
}

<#
.SYNOPSIS
Reduces the nupkg package file by deleting big binaries from the file.

.DESCRIPTION
  Reduces the nupkg package file by deleting all files from the .nupkg file that are not necessary anymore like installer files or 7z binaries.
  It keeps the following files and folders:
  /package/
  /tools/
  _rels
  *.nuspec
  [Content_Types].xml

  The rest will be removed from the nupkg file.

.NOTES
Comment added because reviewer asked to do so.
#>
#
function ReducePackageSize () {
  .$env:ChocolateyInstall\tools\7z.exe d ($env:ChocolateyPackageFolder + "\" + $env:ChocolateyPackageName + ".nupkg")  * -r  -xr!package -xr!tools -xr!_rels -x!"*.nuspec" -x!"[Content_Types].xml"
}
<#
.SYNOPSIS
Which installation steps are actually necessary for the given OS and package parameters?

.DESCRIPTION
Checks the current OS bitness and the given package parameters and marks all steps from the chocolateyvariables file to be actually executed by setting their 'execute' bit.

.PARAMETER objectsList
A list of objects with a 'validpp' key and a 'bit' key from the chocolateyvariables.ps1 file.

.NOTES
Comment added because reviewer asked to do so.
#>

function DetermineExecutionOfAllObjects ($objectsList) {
  Foreach($object in $objectsList) {
    $object.Add('execute', $false)
    $bitStatus = ($object.bit -eq $null) -Or ($object.bit -Contains $osBitness)
    $ppIndependent = (($object.validpp -eq $null) -Or ($object.validpp -Like "Always"))
    Write-Debug ("ppindependent: " + $ppIndependent)
    Write-Debug ("bitStatus: " + $bitStatus)

    Foreach($packageParameter in $object.validpp) {
      Write-Debug ("Status of evaluated package parameter:" + $packageParameter)
      if((Test-Path variable:pp.packageParameter) -eq $true) {
        Write-Debug $pp[$packageParameter]
        Write-Debug ($pp[$packageParameter] -eq $false)
      }
      if(($pp[$packageParameter] -eq $false) -And $bitStatus) {
        $object.execute = $true
      }
    }

    if($ppIndependent -And $bitStatus) {
      $object.execute = $true
    }

    If ($object.ContainsKey("dropIfNull")) {
      Write-Debug ("Object $object contains a dropIfNull!")

      Foreach ($variableToCheck in $object.dropIfNull) {
        If ([string]::IsNullOrWhiteSpace($variableToCheck)) {
          Write-Debug ("Dependent variable is NULL")
          $object.execute = $false
        } else {
          Write-Debug ("Dependent variable is $variableToCheck")
        }
      }
    }
  }
}

<#
.SYNOPSIS
Create the protocol file for the uninstallation

.DESCRIPTION
Writes a list of files that have been extracted from zip files embedded in this package. Is empty if no zip files have been embedded.

.NOTES
Comment added because reviewer asked to do so.
#>
function CreateUninstallFile () {
  # Create empty uninstall file
Out-File -FilePath ($env:ChocolateyPackageFolder + "\uninstall.txt")
}

tools\chocolateyinstall.ps1

# Comments to this script have been added upon request by the chocolatey community reviewer
$ErrorActionPreference = 'Stop';
$toolsDir    = "$(Split-Path -parent $MyInvocation.MyCommand.Definition)"
$unzPath = "${env:TEMP}"
$osBitness = Get-ProcessorBits
if(Test-Path Env:\ChocolateyPackageFolder) {
  . $env:ChocolateyPackageFolder\tools\chocolateyfunctions.ps1
  . $env:ChocolateyPackageFolder\tools\chocolateyvariables.ps1
} else {
  . ((Get-Item -Path ".\" -Verbose).FullName + "\tools\chocolateyfunctions.ps1")
  . ((Get-Item -Path ".\" -Verbose).FullName + "\tools\chocolateyvariables.ps1")
}

# Check for any settings from previous installations of this package
CheckPreviousInstallerSettings
# Get default values that may or may not be already on the machein
GetDefaultValues

$pp = Get-PackageParameters
# Audio plugins can come in various formats for multiple platforms, all contained in one single installer with different control schemes at the CLI (if available).
# With the package parameters below it is possible for the user to have a single unified interface for all audio plugin packages I create.
# If the package parameter is set here and an equivalent installation action is found in the chocovariables.ps1 with the 'validpp' key being equal to the
# package parameter, the default behaviour of the package/installer can be changed.
# Not all possible package parameters here actually do something as this depends on the specific package/software vendor. If a package parameter either does
# not exist below or does not exist in a 'validpp'-key in the chocolateyvariables.ps1, it will be ignored and have no effect.
if ($pp["NoVst2x86"]      -eq $null -or $pp["NoVst2x86"] -eq '')     { $pp["NoVst2x86"] = $false }
if ($pp["NoVst2x64"]      -eq $null -or $pp["NoVst2x64"] -eq '')     { if($osBitness -eq 64) { $pp["NoVst2x64"] = $false }}
if ($pp["NoVst3x86"]      -eq $null -or $pp["NoVst3x86"] -eq '')     { $pp["NoVst3x86"] = $false }
if ($pp["NoVst3x64"]      -eq $null -or $pp["NoVst3x64"] -eq '')     { if($osBitness -eq 64) { $pp["NoVst3x64"] = $false }}
if ($pp["NoAaxx86"]       -eq $null -or $pp["NoAaxx86"] -eq '')      { $pp["NoAaxx86"] = $false }
if ($pp["NoAaxx64"]       -eq $null -or $pp["NoAaxx64"] -eq '')      { if($osBitness -eq 64) { $pp["NoAaxx64"] = $false }}
if ($pp["NoRtas"]         -eq $null -or $pp["NoRtas"] -eq '')        { $pp["NoRtas"] = $false }
if ($pp["NoPresets"]      -eq $null -or $pp["NoPresets"] -eq '')     { $pp["NoPresets"] = $false }
if ($pp["NoNks"]          -eq $null -or $pp["NoNks"] -eq '')         { $pp["NoNks"] = $false }
if ($pp["NoUserFolder"]   -eq $null -or $pp["NoUserFolder"] -eq '')  { $pp["NoUserFolder"] = $false }
if ($pp["NoShortcuts"]    -eq $null -or $pp["NoShortcuts"] -eq '')   { $pp["NoShortcuts"] = $false }
if ($pp["InstallerPath"]  -eq $null -or $pp["InstallerPath"] -eq '') { $fileLocation = "$unzPath\$unzInstPath"; $pp["InstallerPath"]=$false } else { $fileLocation = $pp["InstallerPath"] }
if ($pp["CompanyPath"]    -eq $null -or $pp["CompanyPath"] -eq '')   { $pp["CompanyPath"] = $false }                                          else { $standardCompanyPath=$companyPath; $companyPath = $pp["CompanyPath"] }
if ($pp["LibraryPath"]    -eq $null -or $pp["LibraryPath"] -eq '')   { $pp["LibraryPath"] = $false }                                          else { $libraryPath = $pp["LibraryPath"] }
if ($pp["UserFolderPath"] -eq $null -or $pp["UserFolderPath"] -eq ''){ }                                                                      else { $userFolderPath = $pp["UserFolderPath"]}
if ($pp["Vst2Path"]       -eq $null -or $pp["Vst2Path"] -eq '')      { }                                                                      else { $vst2Path = $pp["Vst2Path"] }
if ($pp["Vst2x86Path"]    -eq $null -or $pp["Vst2x86Path"] -eq '')   { }                                                                      else { $vst2x86_64Path = $pp["Vst2x86Path"] }
if ($pp["Vst3Path"]       -eq $null -or $pp["Vst3Path"] -eq '')      { }                                                                      else { $vst3Path = $pp["Vst3Path"] }
if ($pp["Vst3x86Path"]    -eq $null -or $pp["Vst3x86Path"] -eq '')   { }                                                                      else { $vst3x86_64Path = $pp["Vst3x86Path"] }

# Create/Overwrite bit-aware variables. These variables are used to access different paths across different OS bitnesses in a uniform way.
CreateBitAwareVariables

# Create all the necessary information for the setup after package parameters changed the packages default values.
# This includes registry keys to write, shortcuts to create or additional installer parameters to parse.

# Begin with handling the components of the installer so the settings can be written to registry afterwards
CreateInstallerObjects
CreatePackageParametersObjects
DetermineExecutionOfAllObjects($installerComponentsList)
Foreach ($item in $installerComponentsList)  { CreateInstallerParameters($item) }
Foreach ($item in $packageParametersObjectsList) { HandlePackageArgs($item)     }

# Now that previous settings have been gathered, the package parameters have been evaluated
# as well as the installer components, it's time to determine which settings will be used
#  during installation
CheckPreviousInstallerSettingsAgainstParameters

# Installer components are now fully evaluated and can be written to registry in case some installers don't save these settings on their own (needed for upgrades)
CreateRegistryObjects
CreateRegistryFileObjects
CreateShortcutObjects
CreateSymlinkObjects
CreatePackageRessourcePathObjects
CreateTxtFileObjects

# These functions are necessary for embedded installer and other embedded files, only. Nothing actually happens if
# this package doesn't include something in the 'bin' folder.
ReducePackageSize
CreateUninstallFile

# For each possible install action defined in chocolateyvariables.ps1 that can be customized via package parameter or depends on the OS bitness,
# it is determined if it is ultimately executed or not. Up until here including all DetermineExecutionOfAllObjects calls, nothing has actually
# happened on the system.
$objectsLists = $regKeys, $regKeyFileObjects, $shortcuts, $symlinks, $PackageRessourcePathList, $PackageNewFiles
Foreach($objectsList in $objectsLists) { DetermineExecutionOfAllObjects($objectsList) }

# Each possible install action defined in chocolateyvariables.ps1 with the execute-bit set to true is being executed by each corresponding function.
Foreach ($item in $regKeys)                  { CreateRegKey($item)              }
Foreach ($item in $regKeyFileObjects)        { CreateRegKeyFromFile($item)      }
Foreach ($item in $shortcuts)                { CreateShortcut($item)         }
Foreach ($item in $symlinks)                 { CreateSymlink ($item)         }
Foreach ($item in $PackageRessourcePathList) { CopyPackageRessources($item)     }
Foreach ($item in $PackageRessourcePathList) { WriteUninstallData($item)        }
Foreach ($item in $PackageRessourcePathList) { RemoveTemporaryFiles($item)      }
Foreach ($item in $PackageNewFiles)          { CreateTxtFiles($item)            }
Foreach ($item in $packageParametersObjectsList) { RunInstallerWithPackageParametersObject($item) }
Foreach ($item in $packageParametersObjectsList) { RemoveInstallerObjects($item) }

tools\chocolateyuninstall.ps1

$ErrorActionPreference = 'Stop';
$installerType = 'EXE'
. $env:ChocolateyPackageFolder\tools\chocolateyfunctions.ps1
. $env:ChocolateyPackageFolder\tools\chocolateyvariables.ps1

$silentArgs = '/qn /norestart'
$validExitCodes = @(0, 3010, 1605, 1614, 1641)
if ($installerType -ne 'MSI') {
  $silentArgs = '/VERYSILENT /SUPPRESSMSGBOXES /NORESTART /SP-' # Inno Setup
  $validExitCodes = @(0)
}

$uninstalled = $false
[array]$key = Get-UninstallRegistryKey -SoftwareName $softwareName

if ($key.Count -eq 1) {
  $key | % {
    $file = "$($_.UninstallString)"

    if ($installerType -eq 'MSI') {
      $silentArgs = "$($_.PSChildName) $silentArgs"
      $file = ''
    }

    Uninstall-ChocolateyPackage -PackageName $packageName `
                                -FileType $installerType `
                                -SilentArgs "$silentArgs" `
                                -ValidExitCodes $validExitCodes `
                                -File "$file"
  }
} elseif ($key.Count -eq 0) {
  Write-Warning "$packageName has already been uninstalled by other means."
} elseif ($key.Count -gt 1) {
  Write-Warning "$key.Count matches found!"
  Write-Warning "To prevent accidental data loss, no programs will be uninstalled."
  Write-Warning "Please alert package maintainer the following keys were matched:"
  $key | % {Write-Warning "- $_.DisplayName"}
}

tools\chocolateyvariables.ps1

$packageName = 'TrackLimit'
$softwareName = "${packageName}*"
$company = 'DMGAudio'
$url32        = 'https://dmgaudio.com/dl/TrackLimit_v1.03/TrackLimitWin_v1.03.zip'
$releases = 'https://dmgaudio.com/products_tracklimit.php'
$checksum32 = 'ff11e3b4ae5aa74e9972f48171e752398a7e0b1b62d6426b2b17d579daeb2761'
$companyPath = "${env:PROGRAMFILES}\$company"
$dataPathRegKey = "$packageName"
$vst2Path = "${env:PROGRAMFILES}\Steinberg\VSTPlugins\$company"
$vst2x86_64Path = "${env:ProgramFiles(x86)}\Steinberg\VSTPlugins\$company"
$vst3Path = "${env:COMMONPROGRAMFILES}\VST3\$company"
$vst3x86_64Path = "${env:COMMONPROGRAMFILES(x86)}\VST3\$company"
$userFolderPath = "" ## implement empty user folder check
$presetProducts = "" ## implement empty check
$unzipInstVersion = '1.03'
$unzInstPath = "${packageName}Win_v${unzipInstVersion}.exe"
$zipSuffix = "Win_v*.*.zip"
# This needs to be wrapped into a function so this object also has the data from the package parameters
function CreateRegistryObjects () {
  $global:regKeys =
  # The installer does not have an option for custom paths so we need to create the registry entry before
  @{'path'="HKCU:\SOFTWARE\DMGAudio\InstallPaths"; 'key'="VST_64";  'value'="$vst2Path";                 'bit'=64;    'validpp'="NoVst2x64"},
  @{'path'="HKCU:\SOFTWARE\DMGAudio\InstallPaths"; 'key'="VST_32";  'value'="$vst2x86_64Path";           'bit'=64;    'validpp'="NoVst2x86"},
  @{'path'="HKCU:\SOFTWARE\DMGAudio\InstallPaths"; 'key'="VST_32";  'value'="$vst2Path";                 'bit'=32;    'validpp'="NoVst2x86"},
  @{'path'="HKCU:\SOFTWARE\DMGAudio\InstallPaths"; 'key'="VST3_64"; 'value'="$vst3Path";                 'bit'=64;    'validpp'="NoVst3x64"},
  @{'path'="HKCU:\SOFTWARE\DMGAudio\InstallPaths"; 'key'="VST3_32"; 'value'="$vst3x86_64Path";           'bit'=64;    'validpp'="NoVst3x86"},
  @{'path'="HKCU:\SOFTWARE\DMGAudio\InstallPaths"; 'key'="VST3_32"; 'value'="$vst3Path";                 'bit'=32;    'validpp'="NoVst3x86"},
  @{'path'="HKCU:\SOFTWARE\DMGAudio\$packageName"; 'key'="Path";    'value'="$companyPath\$packageName"; 'bit'=64,32; 'validpp'="NoVst2x64", "NoVst2x86", "NoVst3x64", "NoVst3x86", "NoAaxx86", "NoAaxx64"}
}
function CreateRegistryFileObjects () { $global:regKeyFileObjects }
function CreateShortcutObjects () { $global:shortcuts }
function CreateSymlinkObjects () { $global:symlinks }
# DMG doesn't support silent switches for specific plugin versions
function CreateInstallerObjects () { }
function CreatePackageRessourcePathObjects () { $global:PackageRessourcePathList }
function CreateTxtFileObjects () { $global:PackageNewFiles }
function CreatePackageParametersObjects () {
  $global:packageArgs = @{
    packageName   = $packageName
    unzipLocation = $unzPath
    fileType      = 'exe'
    url           = $url32
    url64bit      = $url64
    softwareName  = "$company $packageName*" #part or all of the Display Name as you see it in Programs and Features. It should be enough to be unique
    checksum      = $checksum32
    checksumType  = 'sha256' #default is md5, can also be sha1, sha256 or sha512
    silentArgs    = '/VERYSILENT /SUPPRESSMSGBOXES /NORESTART /SP-' # Inno Setup
  }
  $global:packageParametersObjectsList = $packageArgs
}

Virus Scan Results

tracklimit.1.03.nupkg (5828800fd31c) - ## / 62
TrackLimitWin_v1.03.zip (ff11e3b4ae5a) - ## / 62

In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).

Chocolatey Pro provides runtime protection from possible malware.

Version History

Version	Downloads	Last Updated	Status
TrackLimit (Install) 1.13.0	57	Thursday, November 2, 2023	Approved
TrackLimit (Install) 1.12	115	Wednesday, April 5, 2023	Exempted
TrackLimit (Install) 1.10.20221112	53	Saturday, November 12, 2022	Approved
TrackLimit (Install) 1.10	45	Monday, November 7, 2022	Approved
TrackLimit (Install) 1.09	78	Sunday, April 3, 2022	Approved
TrackLimit (Install) 1.08	116	Thursday, June 24, 2021	Approved
TrackLimit (Install) 1.07	101	Wednesday, March 17, 2021	Approved
TrackLimit (Install) 1.06	257	Saturday, March 28, 2020	Approved
TrackLimit (Install) 1.05	194	Friday, February 28, 2020	Approved
TrackLimit (Install) 1.04	193	Saturday, December 28, 2019	Approved
TrackLimit (Install) 1.03	198	Tuesday, June 25, 2019	Approved
TrackLimit (Install) 1.02	186	Friday, May 24, 2019	Approved
TrackLimit (Install) 1.01	231	Thursday, November 1, 2018	Approved
TrackLimit (Install) 1.00	421	Sunday, April 30, 2017	Approved

2011-2019 DMGAudio

Release Notes

https://dmgaudio.com/products_tracklimit.php#history

Dependencies

- chocolatey-core.extension (≥ 1.1.0)

Discussion for the TrackLimit (Install) Package

Ground Rules:

This discussion is only about TrackLimit (Install) and the TrackLimit (Install) package. If you have feedback for Chocolatey, please contact the Google Group.
This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
Tell us what you love about the package or TrackLimit (Install), or tell us what needs improvement.
Share your experiences with the package, or extra configuration or gotchas that you've found.
If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.

Resources

Events

Courses

2,245

198

25 Jun 2019

TrackLimit (Install)

TrackLimit (Install) 1.03

All Checks are Passing

Deployment Method: Individual Install, Upgrade, & Uninstall

Deployment Method:

1. Enter Your Internal Repository Url

2. Setup Your Environment

1. Ensure you are set for organizational deployment

2. Get the package into your environment

3. Copy Your Script

4. If applicable - Chocolatey configuration/installation

TrackLimit

Description

Package Specific

Package Parameters

Ground Rules: