Step 1: Review Your Packages

Step 2: Choose Your Integration Method

Step 3: Copy Your Script or Download Config

Option 1: Copy Script

Option 2: Download Config

Step 4: Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the packages and push them to a repository
  Download Packages

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the packages:
  Download Packages
- Follow manual internalization instructions
Package Internalizer (C4B)
- Run: (additional options)
- For package and dependencies run:
- Automate package internalization

Step 5: Copy Your Script

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###

#### We initialize a few things that are needed by this script - there are no other requirements.
$ErrorActionPreference = "Stop"

#### Set TLS 1.2 (3072) as that is the minimum required by various up-to-date repositories.
#### Use integers because the enumeration value for TLS 1.2 won't exist
#### in .NET 4.0, even though they are addressable if .NET 4.5+ is
#### installed (.NET 4.5 is an in-place upgrade).
[System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072

#### We use this variable for future REST calls.
$RequestArguments = @{
    UseBasicParsing = $true
}

## 2. TOP LEVEL VARIABLES ##

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# $NugetRepositoryCredential = [PSCredential]::new(
#     "username",
#     ("password" | ConvertTo-SecureString -AsPlainText -Force)
# )
# $RequestArguments.Credential = $NugetRepositoryCredential

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it
$ChocolateyDownloadUrl = "$($NugetRepositoryUrl.TrimEnd('/'))/package/chocolatey.2.4.0.nupkg"

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# $ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

#### Download the Nupkg, appending .zip to the filename to handle archive cmdlet limitations
if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    $TempDirectory = Join-Path $env:Temp "chocolateyInstall"
    if (-not (Test-Path $TempDirectory -PathType Container)) {
        $null = New-Item -Path $TempDirectory -ItemType Directory
    }
    $DownloadedNupkg = Join-Path $TempDirectory "$(Split-Path $ChocolateyDownloadUrl -Leaf).zip"
    Invoke-WebRequest -Uri $ChocolateyDownloadUrl -OutFile $DownloadedNupkg @RequestArguments

    #### Extract the Nupkg, and run the chocolateyInstall script
    if (Get-Command Microsoft.PowerShell.Archive\Expand-Archive -ErrorAction SilentlyContinue) {
        Microsoft.PowerShell.Archive\Expand-Archive -Path $DownloadedNupkg -DestinationPath $TempDirectory -Force
    } else {
        # PowerShell versions <4.0 do not have this function available
        try {
            $shellApplication = New-Object -ComObject Shell.Application
            $zipPackage = $shellApplication.NameSpace($DownloadedNupkg)
            $destinationFolder = $shellApplication.NameSpace($TempDirectory)
            $destinationFolder.CopyHere($zipPackage.Items(), 0x10)
        } catch {
            Write-Warning "Unable to unzip package using built-in compression."
            throw $_
        }
    }

    & $(Join-Path $TempDirectory "tools\chocolateyInstall.ps1")
}

if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    refreshenv
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# choco feature enable -n useFipsCompliantChecksums

### b. Apply Recommended Configuration ###
#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
choco config set --name cacheLocation --value C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
choco config set --name commandExecutionTimeoutSeconds --value 14400

#### Turn off download progress when running choco through integrations
choco feature disable --name showDownloadProgress

### c. Sources ###
#### Remove the default community package repository source
choco source list --limitoutput | ConvertFrom-Csv -Header 'Name', 'Location' -Delimiter '|' | ForEach-Object {
    if ($_.Location -eq 'https://community.chocolatey.org/api/v2/') {
        choco source remove -n $_.Name
    }
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
if ($NugetRepositoryCredential) {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --user $NugetRepositoryCredential.UserName --password $NugetRepositoryCredential.GetNetworkCredential().Password --priority 1
} else {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --priority 1
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
choco upgrade chocolatey --confirm

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
choco install chocolatey-license --source $NugetRepositoryUrl --confirm

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco source disable --name chocolatey.licensed
} else {
    Write-Warning "Not disabling 'chocolatey.licensed' feed, as Chocolatey-License has not been installed."
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco install chocolatey.extension --source $NugetRepositoryUrl --confirm
} else {
    Write-Warning "Not installing 'chocolatey.extension', as Chocolatey-License has not been installed."
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
choco feature disable --name showNonElevatedWarnings
choco feature enable --name useBackgroundService
choco feature enable --name useBackgroundServiceWithNonAdministratorsOnly
choco feature enable --name allowBackgroundServiceUninstallsFromUserInstallsOnly
choco config set --name allowedBackgroundServiceCommands --value "install,upgrade,uninstall"

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if ($ChocolateyCentralManagementUrl) {
    choco install chocolatey-agent --source $NugetRepositoryUrl --confirm
    choco config set --name CentralManagementServiceUrl --value $ChocolateyCentralManagementUrl
    if ($ChocolateyCentralManagementClientSalt) {
        choco config set --name centralManagementClientCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementClientSalt
    }
    if ($ChocolateyCentralManagementServiceSalt) {
        choco config set --name centralManagementServiceCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementServiceSalt
    }
    choco feature enable --name useChocolateyCentralManagement
    choco feature enable --name useChocolateyCentralManagementDeployments
}

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. chocolatey.chocolatey
##### You will require the chocolatey.chocolatey collection to be installed
##### on all machines using this playbook.
##### Please see https://github.com/chocolatey/chocolatey-ansible/#installing-the-collection-from-ansible-galaxy

- name: Install and Configure Chocolatey
  hosts: all

## 2. TOP LEVEL VARIABLES ##
  vars:

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
    nuget_repository_url: INTERNAL REPO URL

### b. Internal Repository Credential ###
#### If required, add the repository access credential here and
#### uncomment lines with source_username and source_password below
#    nuget_repository_username: username
#    nuget_repository_password: password

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#    chocolatey_central_management_url: https://chocolatey-central-management:24020/ChocolateyManagementService

#### ii. If using a Client Salt, add it here
#    chocolatey_central_management_client_salt: clientsalt

#### iii. If using a Service Salt, add it here
#    chocolatey_central_management_service_salt: servicesalt

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

  tasks:
  - name: Install chocolatey
    win_chocolatey:
      name: chocolatey
      source: ""{{ nuget_repository_url }}""
      # source_username: ""{{ nuget_repository_username }}""
      # source_password: ""{{ nuget_repository_password }}""

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#   - name: Enable FIPS compliance
#     win_chocolatey_feature:
#       name: useFipsCompliantChecksums
#       state: enabled

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
  - name: Set the cache location
    win_chocolatey_config:
      name: cacheLocation
      state: present
      value: C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
  - name: Set the command execution timeout
    win_chocolatey_config:
      name: commandExecutionTimeoutSeconds
      state: present
      value: 14400

#### Turn off download progress when running choco through integrations
  - name: Disable showing download progress
    win_chocolatey_feature:
      name: showDownloadProgress
      state: disabled

### c. Sources ###
#### Remove the default community package repository source
  - name: Remove Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey
      state: absent

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here
#### NOTE: This EXAMPLE may require changes
  - name: Add Internal Repository
    win_chocolatey_source:
      name: ChocolateyInternal
      state: present
      source: {{ nuget_repository_url }}
      # source_username: {{ nuget_repository_username }}
      # source_password: {{ nuget_repository_password }}
      priority: 1

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
  - name: Upgrade Chocolatey
    win_chocolatey:
      name: chocolatey
      state: latest

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.
### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
  - name: Install Chocolatey License
    win_chocolatey:
      name: chocolatey-license
      source: ChocolateyInternal
      state: latest

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
  - name: Disable Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey.licensed
      state: disabled

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
  - name: Install Chocolatey Extension
    win_chocolatey:
      name: chocolatey.extension
      source: ChocolateyInternal
      state: latest

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
  - name: Hide not-elevated warnings
    win_chocolatey_feature:
      name: showNonElevatedWarnings
      state: disabled

  - name: Use background mode for self-service
    win_chocolatey_feature:
      name: useBackgroundService
      state: enabled

  - name: Use background service for non-admins
    win_chocolatey_feature:
      name: useBackgroundServiceWithNonAdministratorsOnly
      state: enabled

  - name: Allow background uninstallation for user installs
    win_chocolatey_feature:
      name: allowBackgroundServiceUninstallsFromUserInstallsOnly
      state: enabled

  - name: Set allowed background service commands
    win_chocolatey_config:
      name: backgroundServiceAllowedCommands
      state: present
      value: install,upgrade,uninstall

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
  - name: Install Chocolatey Agent
    when: chocolatey_central_management_url is defined
    win_chocolatey:
      name: chocolatey-agent
      source: ChocolateyInternal
      state: latest

  - name: Set the Central Management Service URL
    when: chocolatey_central_management_url is defined
    win_chocolatey_config:
      name: CentralManagementServiceUrl
      state: present
      value: {{ chocolatey_central_management_url }}

  - name: Set the Central Management Client Salt
    when: chocolatey_central_management_client_salt is defined
    win_chocolatey_config:
      name: centralManagementClientCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_client_salt }}

  - name: Set the Central Management Service Salt
    when: chocolatey_central_management_service_salt is defined
    win_chocolatey_config:
      name: centralManagementServiceCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_service_salt }}

  - name: Use Central Management
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagement
      state: enabled

  - name: Use Central Management Deployments
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagementDeployments
      state: enabled

See docs at https://docs.chef.io/resource_chocolatey_package.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### The Chocolatey resources are available with any recent version of Chef.
#### We utilise the Chocolatey recipe to install the Chocolatey binaries.
include_recipe "chocolatey"

## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# NugetRepositoryUsername = "username"
# NugetRepositoryPassword = "password"

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
ChocolateyNupkgUrl = "INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg",

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
node['chocolatey']['install vars'] = {
  'chocolateyDownloadUrl' => "#{ChocolateyNupkgUrl}",
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# chocolatey_feature 'useFipsCompliantChecksums' do
#   action :enable
# end

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolatey_config 'cacheLocation' do
  value 'C:\ProgramData\chocolatey\cache'
end

#### Increase timeout to at least 4 hours
chocolatey_config 'commandExecutionTimeoutSeconds' do
  value '14400'
end

#### Turn off download progress when running choco through integrations
chocolatey_feature 'showDownloadProgress' do
  action :disable
end

### c. Sources ###
#### Remove the default community package repository source
chocolatey_source 'chocolatey' do
  action :remove
end

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
chocolatey_source 'ChocolateyInternal' do
  source "#{NugetRepositoryUrl}"
  priority 1
  action   :add
end

execute 'ChocolateyInternal' do
  command "choco source add --name ChocolateyInternal -s #{NugetRepositoryUrl} -u=#{NugetRepositoryUsername} -p=#{NugetRepositoryPassword} --priority=1"
  only_if { NugetRepositoryUsername != nil || NugetRepositoryPassword != nil }
end

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
chocolatey_package 'chocolatey' do
  action :upgrade
  source "#{NugetRepositoryUrl}"
end

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
chocolatey_package 'chocolatey-license' do
  action :install
  source "#{NugetRepositoryUrl}"
end

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
chocolatey_source 'chocolatey.licensed' do
  action            :disable
end

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
chocolatey_package 'chocolatey.extention' do
  action     install
  source     "#{NugetRepositoryUrl}"
end

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolatey_feature 'showNonElevatedWarnings' do
  action :disable
end

chocolatey_feature 'useBackgroundService' do
  action :enable
end

chocolatey_feature 'useBackgroundServiceWithNonAdministratorsOnly' do
  action :enable
end

chocolatey_feature 'allowBackgroundServiceUninstallsFromUserInstallsOnly' do
  action :enable
end

chocolatey_config 'backgroundServiceAllowedCommands' do
  value 'install,upgrade,uninstall'
end

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
chocolatey_package 'chocolatey-agent' do
  action     install
  source     "#{NugetRepositoryUrl}"
  # user       "#{NugetRepositoryUsername}"
  # password   "#{NugetRepositoryPassword}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'CentralManagementServiceUrl' do
  value  "#{ChocolateyCentralManagementUrl}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'centralManagementClientCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementClientSalt}"
  only_if { ChocolateyCentralManagementClientSalt != nil }
end

chocolatey_config 'centralManagementServiceCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementServiceSalt}"
  only_if { ChocolateyCentralManagementServiceSalt != nil }
end

chocolatey_feature 'useChocolateyCentralManagement' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_feature 'useChocolateyCentralManagementDeployments' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.

If Applicable - Chocolatey Configuration/Installation


#requires -Modules cChoco
## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires chocolatey\cChoco DSC module to be installed on the machine compiling the DSC manifest
#### NOTE: This will need to be installed before running the DSC portion of this script
if (-not (Get-Module cChoco -ListAvailable)) {
    $null = Install-PackageProvider -Name NuGet -MinimumVersion 2.8.5.201 -Force
    if (($PSGallery = Get-PSRepository -Name PSGallery).InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy Trusted
    }
    Install-Module -Name cChoco
    if ($PSGallery.InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy $PSGallery.InstallationPolicy
    }
}

#### ii. Requires a hosted copy of the install.ps1 script
##### This should be available to download without authentication.
##### The original script can be found here: https://community.chocolatey.org/install.ps1

Configuration ChocolateyConfig {
## 2. TOP LEVEL VARIABLES ##
    param(
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
        $NugetRepositoryUrl      = "INTERNAL REPO URL",

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
        $ChocolateyNupkgUrl      = "INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg",

### c. Internal Repository Credential ###
#### If required, add the repository access credential here
#        $NugetRepositoryCredential = [PSCredential]::new(
#            "username",
#            ("password" | ConvertTo-SecureString -AsPlainText -Force)
#        ),

### d. Install.ps1 URL
#### The path to the hosted install script:
        $ChocolateyInstallPs1Url = "https://community.chocolatey.org/install.ps1"

### e. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#        $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService",

#### ii. If using a Client Salt, add it here
#        $ChocolateyCentralManagementClientSalt = "clientsalt",

#### iii. If using a Service Salt, add it here
#        $ChocolateyCentralManagementServiceSalt = "servicesalt"
    )
    Import-DscResource -ModuleName PSDesiredStateConfiguration
    Import-DscResource -ModuleName cChoco

    Node 'localhost' {
## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
        Environment chocoDownloadUrl {
            Name  = "chocolateyDownloadUrl"
            Value = $ChocolateyNupkgUrl
        }

        cChocoInstaller installChocolatey {
            DependsOn = "[Environment]chocoDownloadUrl"
            InstallDir = Join-Path $env:ProgramData "chocolatey"
            ChocoInstallScriptUrl = $ChocolateyInstallPs1Url
        }

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#        cChocoFeature featureFipsCompliance {
#            FeatureName = "useFipsCompliantChecksums"
#        }

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
        cChocoConfig cacheLocation {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "cacheLocation"
            Value      = "C:\ProgramData\chocolatey\cache"
        }

#### Increase timeout to at least 4 hours
        cChocoConfig commandExecutionTimeoutSeconds {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "commandExecutionTimeoutSeconds"
            Value      = 14400
        }

#### Turn off download progress when running choco through integrations
        cChocoFeature showDownloadProgress {
            DependsOn   = "[cChocoInstaller]installChocolatey"
            FeatureName = "showDownloadProgress"
            Ensure      = "Absent"
        }

### c. Sources ###
#### Remove the default community package repository source
        cChocoSource removeCommunityRepository {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name       = "chocolatey"
            Ensure     = "Absent"
        }

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here.
#### NOTE: This EXAMPLE may require changes
        cChocoSource addInternalSource {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name        = "ChocolateyInternal"
            Source      = $NugetRepositoryUrl
            Credentials = $NugetRepositoryCredential
            Priority    = 1
        }

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
        cChocoPackageInstaller updateChocolatey {
            DependsOn   = "[cChocoSource]addInternalSource", "[cChocoSource]removeCommunityRepository"
            Name        = "chocolatey"
            AutoUpgrade = $true
        }

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
        cChocoPackageInstaller chocolateyLicense {
            DependsOn = "[cChocoPackageInstaller]updateChocolatey"
            Name      = "chocolatey-license"
        }

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
        Script disableLicensedSource {
            DependsOn  = "[cChocoPackageInstaller]chocolateyLicense"
            GetScript  = {
                $Source = choco source list --limitoutput | `
                    ConvertFrom-Csv -Delimiter '|' -Header Name, Source, Disabled | `
                    Where-Object Name -eq "chocolatey.licensed"

                return @{
                    Result = if ($Source) {
                        [bool]::Parse($Source.Disabled)
                    } else {
                        Write-Warning "Source 'chocolatey.licensed' was not present."
                        $true  # Source does not need disabling
                    }
                }
            }
            SetScript  = {
                $null = choco source disable --name "chocolatey.licensed"
            }
            TestScript = {
                $State = [ScriptBlock]::Create($GetScript).Invoke()
                return $State.Result
            }
        }

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
        cChocoPackageInstaller chocolateyLicensedExtension {
            DependsOn = "[Script]disableLicensedSource"
            Name      = "chocolatey.extension"
        }

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
        cChocoFeature hideElevatedWarnings {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "showNonElevatedWarnings"
            Ensure      = "Absent"
        }

        cChocoFeature useBackgroundService {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundService"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceWithNonAdmins {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundServiceWithNonAdministratorsOnly"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceUninstallsForUserInstalls {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "allowBackgroundServiceUninstallsFromUserInstallsOnly"
            Ensure      = "Present"
        }

        cChocoConfig allowedBackgroundServiceCommands {
            DependsOn   = "[cChocoFeature]useBackgroundService"
            ConfigName = "backgroundServiceAllowedCommands"
            Value       = "install,upgrade,uninstall"
        }

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
        if ($ChocolateyCentralManagementUrl) {
            cChocoPackageInstaller chocolateyAgent {
                DependsOn = "[cChocoPackageInstaller]chocolateyLicensedExtension"
                Name      = "chocolatey-agent"
            }

            cChocoConfig centralManagementServiceUrl {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                ConfigName = "CentralManagementServiceUrl"
                Value       = $ChocolateyCentralManagementUrl
            }

            if ($ChocolateyCentralManagementClientSalt) {
                cChocoConfig centralManagementClientSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementClientCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementClientSalt
                }
            }

            if ($ChocolateyCentralManagementServiceSalt) {
                cChocoConfig centralManagementServiceSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementServiceCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementServiceSalt
                }
            }

            cChocoFeature useCentralManagement {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagement"
                Ensure      = "Present"
            }

            cChocoFeature useCentralManagementDeployments {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagementDeployments"
                Ensure      = "Present"
            }
        }
    }
}

# If working this into an existing configuration with a good method for
$ConfigData = @{
    AllNodes = @(
        @{
            NodeName                    = "localhost"
            PSDscAllowPlainTextPassword = $true
        }
    )
}

try {
    Push-Location $env:Temp
    $Config = ChocolateyConfig -ConfigurationData $ConfigData
    Start-DscConfiguration -Path $Config.PSParentPath -Wait -Verbose -Force
} finally {
    Pop-Location
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires puppetlabs/chocolatey module
####  See https://forge.puppet.com/puppetlabs/chocolatey


## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$_repository_url = 'INTERNAL REPO URL'

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
$_choco_download_url = 'INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg'

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $_chocolatey_central_management_url = 'https://chocolatey-central-management:24020/ChocolateyManagementService'

#### ii. If using a Client Salt, add it here
# $_chocolatey_central_management_client_salt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $_chocolatey_central_management_service_salt = 'servicesalt'


## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
### Note: `chocolatey_download_url is completely different than normal
###  source locations. This is directly to the bare download url for the
###  chocolatey.nupkg, similar to what you see when you browse to
###  https://community.chocolatey.org/api/v2/package/chocolatey
class {'chocolatey':
  chocolatey_download_url => $_choco_download_url,
  use_7zip                => false,
}


## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations

#chocolateyfeature {'useFipsCompliantChecksums':
#  ensure => enabled,
#}

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolateyconfig {'cacheLocation':
  value => 'C:\ProgramData\chocolatey\cache',
}

#### Increase timeout to at least 4 hours
chocolateyconfig {'commandExecutionTimeoutSeconds':
  value => '14400',
}

#### Turn off download progress when running choco through integrations
chocolateyfeature {'showDownloadProgress':
  ensure => disabled,
}

### c. Sources ###
#### Remove the default community package repository source
chocolateysource {'chocolatey':
  ensure   => absent,
  location => 'https://community.chocolatey.org/api/v2/',
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE requires changes
chocolateysource {'internal_chocolatey':
  ensure             => present,
  location           => $_repository_url,
  priority           => 1,
  username           => 'optional',
  password           => 'optional,not ensured',
  bypass_proxy       => true,
  admin_only         => false,
  allow_self_service => false,
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/

package {'chocolatey':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}


## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/guides/organizations/organizational-deployment-guide#exercise-4-create-a-package-for-the-license

# TODO: Add resource for installing/ensuring the chocolatey-license package
package {'chocolatey-license':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
## Disabled sources still need all other attributes until
## https://tickets.puppetlabs.com/browse/MODULES-4449 is resolved.
## Password is necessary with user, but not ensurable, so it should not
## matter what it is set to here. If you ever do get into trouble here,
## the password is your license GUID.
chocolateysource {'chocolatey.licensed':
  ensure   => disabled,
  priority => '10',
  user     => 'customer',
  password => '1234',
  require  => Package['chocolatey-license'],
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
package {'chocolatey.extension':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
  require  => Package['chocolatey-license'],
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolateyfeature {'showNonElevatedWarnings':
  ensure => disabled,
}

chocolateyfeature {'useBackgroundService':
  ensure => enabled,
}

chocolateyfeature {'useBackgroundServiceWithNonAdministratorsOnly':
  ensure => enabled,
}

chocolateyfeature {'allowBackgroundServiceUninstallsFromUserInstallsOnly':
  ensure => enabled,
}

chocolateyconfig {'backgroundServiceAllowedCommands':
  value => 'install,upgrade,uninstall',
}

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if $_chocolatey_central_management_url {
  package {'chocolatey-agent':
    ensure   => latest,
    provider => chocolatey,
    source   => $_repository_url,
    require  => Package['chocolatey-license'],
  }

  chocolateyconfig {'CentralManagementServiceUrl':
    value   => $_chocolatey_central_management_url,
  }

  if $_chocolatey_central_management_client_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  if $_chocolatey_central_management_service_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  chocolateyfeature {'useChocolateyCentralManagement':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }

  chocolateyfeature {'useChocolateyCentralManagementDeployments':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }
}

Need Help? View our docs or file an issue.

There is already a version of this package in your Script Builder

Current Version	New Version

Downloads:

13,836

Downloads of v 1.2.0.20191031:

12,186

Last Update:

31 Oct 2019

Package Maintainer(s):

DarwinJS

Software Author(s):

DarwinJS

Tags:

undo-winrmconfig-during-shutdown winrm packer admin

undo-winrmconfig-during-shutdown (Install)

1.2.0.20191031 | Updated: 31 Oct 2019

Downloads:

13,836

Downloads of v 1.2.0.20191031:

12,186

Maintainer(s):

DarwinJS

Software Author(s):

DarwinJS

Tags:

undo-winrmconfig-during-shutdown winrm packer admin

undo-winrmconfig-during-shutdown (Install) 1.2.0.20191031

Legal Disclaimer: Neither this package nor Chocolatey Software, Inc. are affiliated with or endorsed by DarwinJS. The inclusion of DarwinJS trademark(s), if any, upon this webpage is solely to identify DarwinJS goods or services and not for commercial purposes.

All Checks are Passing

3 Passing Tests

Show Checks

Validation Testing Passed

Verification Testing Passed

Details

Scan Testing Successful:

No detections found in any package files

Details

Learn More

Deployment Method: Individual Install, Upgrade, & Uninstall

To install undo-winrmconfig-during-shutdown (Install), run the following command from the command line or from PowerShell:

To upgrade undo-winrmconfig-during-shutdown (Install), run the following command from the command line or from PowerShell:

To uninstall undo-winrmconfig-during-shutdown (Install), run the following command from the command line or from PowerShell:

NOTE

This applies to both open source and commercial editions of Chocolatey.

1. Enter Your Internal Repository Url

(this should look similar to https://community.chocolatey.org/api/v2/)

2. Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the package and push it to a repository Download

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the package:
  Download
- Follow manual internalization instructions

Package Internalizer (C4B)

Run: (additional options)

choco download undo-winrmconfig-during-shutdown --internalize --source=https://community.chocolatey.org/api/v2/

For package and dependencies run:

choco push --source="'INTERNAL REPO URL'"

Automate package internalization

3. Copy Your Script

choco upgrade undo-winrmconfig-during-shutdown -y --source="'INTERNAL REPO URL'" [other options]

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:


choco upgrade undo-winrmconfig-during-shutdown -y --source="'INTERNAL REPO URL'" 
$exitCode = $LASTEXITCODE

Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
  Exit 0
}

Exit $exitCode


- name: Install undo-winrmconfig-during-shutdown
  win_chocolatey:
    name: undo-winrmconfig-during-shutdown
    version: '1.2.0.20191031'
    source: INTERNAL REPO URL
    state: present

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.


chocolatey_package 'undo-winrmconfig-during-shutdown' do
  action    :install
  source   'INTERNAL REPO URL'
  version  '1.2.0.20191031'
end

See docs at https://docs.chef.io/resource_chocolatey_package.html.


cChocoPackageInstaller undo-winrmconfig-during-shutdown
{
    Name     = "undo-winrmconfig-during-shutdown"
    Version  = "1.2.0.20191031"
    Source   = "INTERNAL REPO URL"
}

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.


package { 'undo-winrmconfig-during-shutdown':
  ensure   => '1.2.0.20191031',
  provider => 'chocolatey',
  source   => 'INTERNAL REPO URL',
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

4. If applicable - Chocolatey configuration/installation

See infrastructure management matrix for Chocolatey configuration elements and examples.

Package Approved

This package was approved as a trusted package on 15 Nov 2024.

Description

Disable winrm through a self-deleting shutdown task.
Many windows remote orchestration tools (e.g. Packer) instruct you to completely open up winrm permissions in a way that is not safe for production.
Usually there is no built in method nor instruction on how to re-secure it or shut it back down.
The assumption most likely being that you would handle proper winrm re-configuration as a part of production deployment.
This is not a least privileged approach - depending on how big your company is and how widely your hypervisor templates are used - this is a disaster waiting to happen. So I feel leaving it in a disabled state by default is the far safer option.
To complicate things, if you attempt to secure winrm or shut it down as your last step in orchestration you slam the door on the orchestration system and it marks the attempt as a failure.
Due to imprecise timing, start up tasks that disable winrm could conflict with a subsequent attempt to re-enable it on the next boot for final configuration steps (especially if you are building a hypervisor template).
This self-deleting shutdown task performs the disable on the first shutdown and deletes itself.
If a system shutsdown extremely quickly there is some risk that the shutdown job would not be deleted - but in testing on AWS (very fast shutdown), there have not been an observed problems.

Files

tools\chocolateyinstall.ps1


$ErrorActionPreference = 'Stop';
$toolsDir   = "$(Split-Path -parent $MyInvocation.MyCommand.Definition)"
$packageName   = $env:ChocolateyPackageName
$ScriptToRun = "$toolsDir\Undo-WinRMConfig.ps1"

$pp = Get-PackageParameters

$RunImmediatelyValue = $False
if ($pp.RunImmediately) {
  Write-Host "/RunImmediately was used, will run WinRM undo and exit..."
  Start-ChocolateyProcessAsAdmin "& `'$ScriptToRun`' -RunImmediately"
}
else 
{
  Start-ChocolateyProcessAsAdmin "& `'$ScriptToRun`'"  
}

tools\chocolateyuninstall.ps1


$ErrorActionPreference = 'Stop';
$toolsDir   = "$(Split-Path -parent $MyInvocation.MyCommand.Definition)"
$packageName   = $env:ChocolateyPackageName
$ScriptToRun = "$toolsDir\Undo-WinRMConfig.ps1"

Start-ChocolateyProcessAsAdmin "& `'$ScriptToRun`' -RemoveShutdownScriptSetup"

tools\readme.md


# Undo-WinRMConfig Documentation

- [Undo-WinRMConfig Documentation](#undo-winrmconfig-documentation)
- [Community Testing Help Needed!](#community-testing-help-needed)
- [The Important Security Problem](#the-important-security-problem)
- [This Solution](#this-solution)
- [This Code Implementation](#this-code-implementation)
- [The Disclaimers](#the-disclaimers)
- [Ways to Run It](#ways-to-run-it)
    - [Direct Run From GitHub](#direct-run-from-github)
        - [Run Undo Process At Shutdown (default)](#run-undo-process-at-shutdown-default)
        - [Run Immediately (Careful!)](#run-immediately-careful)
        - [Remove Shutdown Job Before It Runs](#remove-shutdown-job-before-it-runs)
    - [Place On Image Template Without Running](#place-on-image-template-without-running)
    - [Chocolatey Package (Pre-release - does not show up publicly](#chocolatey-package-pre-release---does-not-show-up-publicly)
        - [Run At Shutdown (default)](#run-at-shutdown-default)
        - [Run Immediately (Careful!)](#run-immediately-careful)
        - [Remove Shutdown Job Before It Runs](#remove-shutdown-job-before-it-runs)
# Community Testing Help Needed!
It is not possible for me to test all OS versions and PowerShell versions running directly and via Chocolatey.  Thinking community members could pick scenarios relevant to them.  Below are some of the desirable tests.  Problems reports should be submitted to: https://github.com/DarwinJS/CloudyWindowsAutomationCode/issues

Tests for each below scenario:
* "does it execute at all" but also 
* "does it effectively undo WinRM configuration (not disable)" and  
* "Can WinRm be rconfigured again with **conventional instructions** after this has run"

Script Functionality:
* (Default) Run and setup shutdown job (choco install)
* Run immediately to Undo WinRM Configuration (don't run over remoting) (choco install -params '"/RunImmediately"' )
* -RemoveShutdownScriptConfig (Choco Uninstall) - removes shutdown job before it runs (it self deletes during actual operation)

Run Scope:
* Run Over Remoting (Choco / non-choco)
* Run Under System Account (choco / non-choco)
* Run under a system account service (choco / non-choco)

OS / PowerShell Scope:
* Windows 2008 R2 (Tested) / Windows 7 (Windows Version 6.1)
* Server 2012 R2 (Tested) / Windows 8.1 (Windows Version 6.3)
* Server 2016 (Tested) / Windows 10 (Windows Version 10.0)

# The Important Security Problem
Many windows remote orchestration tools (e.g. Packer) instruct you to open up winrm permissions in a way that is not safe for (nor intended for) use in production.  (e.g. https://www.packer.io/docs/builders/ncloud.html#sample-code-of-template-json)  Generally there is no guidance on how to re-secure it nor even a reminder to do so.  The assumption most likely being that you would handle proper winrm re-configuration as a part of provisioning the machine - but in many organizations systems preparation may be the only use of WinRM - so it is forgotten.  Or maybe whatever you use to re-configure it does not actively manage one of the permissive settings used during machine provisioning.

Sysprep does not revert WinRM configuration to a pristine state and I checked with Microsoft and there is not an API call to revert to pristine either.

Keep in mind that disabling WinRM is not the goal - but rather returning it to a pristine state (or as close as possible).  This allows it to be reconfigured using conventional instructions - including the possibility that subsequent system preparation automation (like packer) will be used to prepare a new template image based on a previously prepared image template.

Leaving WinRM in this state is not a least privileged approach for several reasons: 

- sysprep does not automatically deconfigure WinRM.
- it is not secure at rest nor by default once booted.
- it is unlikely the next user of the image template would think that WinRM has been preconfigured with permissive settings and that they would need to deal with it.
- frequently images used for testing are not joined to a domain, so even if these settings are handled by a GPO in production environments - not all uses of the image template will necessarily have the benefit of such a GPO configuration.

Depending on how big your company is and how widely your hypervisor templates are used - this is a disaster waiting to happen.  So I feel leaving it in a disabled state by default is the far safer option.

# This Solution
This self-deleting shutdown task performs the disable on the first shutdown and deletes itself.  It can also run immediately - which only works if you are not using WinRM to run it.

# This Code Implementation
The goal of this code is NOT to disable WinRM, but to set WinRM configuration back to as close to pristine as possible so that it can be reconfigured as necessary.
At first glance, the code will appear a bit over complex, but that complexity has some rationale behind it:
1. If you attempt to revert WinRM configuration as your last step in automation that is using WinRM to access the machine - you slam the door on your own fingers and the automation will most likely exit with an error.  This is the exact scenario for Packer.
2. Due to imprecise timing, **startup** tasks that disable winrm could conflict with a subsequent attempt to re-enable it on the next boot for final configuration steps.
3. Setting up a shutdown script requires some manipulation of GPO files and registry keys.  To ensure appropriate security permissions no matter what user it used to execute this code, the setup is done via a scheduled job.
4. Since this implementation merely stages the undo to happen at shutdown - the code can run at any point during before the very last shutdown - it does not have to run last (though at the point you run it, you should not need anymore reboots with winrm enabled to finish configuration)

If you have the luxury of running this code locally on the build machine without using WinRM, then you can use the "RunImmediately" switch to skip the above convolutions.

FYI: If a system shuts down extremely quickly there is some risk that the shutdown job would not be deleted - but in testing on AWS (very fast shutdown), there have not been an observed problems.

# The Disclaimers
This code was engineered by reversing the commands required to configure winrm to be used for system preparation by Packer.  In that regard it results in returning WinRM configuration to a state similar to, but quite possibly not identical to pristine defaults.

If your WinRM configuration process involves configuring additional items, the reversal of those settings may need to be added to this script.  You could create a customized copy or submit an issue or PR against this script.

This code was engineered and tested on Server 2012 R2 / PowerShell 4 - it is unknown how well it works for earlier versions.
# Ways to Run It

## Direct Run From GitHub

### Run Undo Process At Shutdown (default)
    Invoke-Expression (invoke-webrequest -uri 'https://raw.githubusercontent.com/DarwinJS/Undo-WinRMConfig/master/Undo-WinRMConfig.ps1')

### Run Immediately (Careful!)
**Caution:** If you run this command while remoting in, you will slam the remoting connection closed and have a non-zero exit code - does not work with packer.
    
    Invoke-webrequest -uri 'https://raw.githubusercontent.com/DarwinJS/Undo-WinRMConfig/master/Undo-WinRMConfig.ps1' -outfile $env:public\Undo-WinRMConfig.ps1 ; & $env:public\Undo-WinRMConfig.ps1 -RunImmediately

### Remove Shutdown Job Before It Runs
    
    Invoke-webrequest -uri 'https://raw.githubusercontent.com/DarwinJS/Undo-WinRMConfig/master/Undo-WinRMConfig.ps1' -outfile $env:public\Undo-WinRMConfig.ps1 ; & $env:public\Undo-WinRMConfig.ps1 -RemoveShutdownScriptConfig

## Place On Image Template Without Running
    Invoke-webrequest -uri 'https://raw.githubusercontent.com/DarwinJS/Undo-WinRMConfig/master/Undo-WinRMConfig.ps1' -outfile $env:public\Undo-WinRMConfig.ps1

## Chocolatey Package  (Pre-release - does not show up publicly

**ATTENTION: While this code is in the community feedback phase, I have it on a test feed.  It will be available via chocolatey.org when the code is finalized**

### Run At Shutdown (default)
    choco install undo-winrmconfig-at-shutdown -pre -confirm

### Run Immediately (Careful!)
**Caution:** If you run this command while remoting in, you will slam the remoting connection closed and have a non-zero exit code.

    choco install undo-winrmconfig-at-shutdown -pre -confirm -params '"/RunImmediately"' -source https://www.myget.org/F/chocotesting/api/v2/

### Remove Shutdown Job Before It Runs
    
    choco uninstall undo-winrmconfig-at-shutdown -confirm

tools\Undo-WinRMConfig.ps1

<#
.SYNOPSIS
  Initializes (full read of all bytes) AWS EBS volumes using FIO (File IO Utility).
  See this post for full details on why this code is helpful: https://cloudywindows.io/winrm-for-provisioning---close-the-door-on-the-way-out-eh/
.DESCRIPTION
  CloudyWindows.io DevOps Automation: https://github.com/DarwinJS/CloudyWindowsAutomationCode
  Why and How Blog Post: https://cloudywindows.io/winrm-for-provisioning---close-the-door-when-you-are-done-eh/
  Invoke-Expression (invoke-webrequest -uri 'https://raw.githubusercontent.com/DarwinJS/Undo-WinRMConfig/blob/master/Undo-WinRMConfig/Undo-WinRMConfig.ps1')
  Invoke-webrequest -uri 'https://raw.githubusercontent.com/DarwinJS/Undo-WinRMConfig/blob/master/Undo-WinRMConfig/Undo-WinRMConfig.ps1' -outfile $env:public\Undo-WinRMConfig.ps1 ; & $env:public\Undo-WinRMConfig.ps1 -immediately
  Contributing New Undo Profiles: https://github.com/DarwinJS/Undo-WinRMConfig/blob/master/readme.md

  Disclaimer - this code was engineered and tested on Server 2012 R2 and Server 2016.

  Many windows remote orchestration tools (e.g. Packer) instruct you to completely open up winrm permissions in a way that is not safe for production.
  Usually there is no built in method nor instruction on how to re-secure it or shut it back down.
  The assumption most likely being that you would handle proper configuration as a part of production deployment.
  This is not a least privileged approach - depending on how big your company is and how widely your hypervisor templates are used - this is a disaster waiting to happen.  So I feel leaving it in a disabled state by default is the far safer option.
  To complicate things, if you attempt to secure winrm or shut it down as your last step in orchestration you slam the door on the orchestration system and it marks the attempt as a failure.
  Due to imprecise timing, start up tasks that disable winrm could conflict with a subsequent attempt to re-enable it on the next boot for final configuration steps (especially if you are building a hypervisor template).
  This self-deleting shutdown task performs the disable on the first shutdown and deletes itself.
  If a system shutsdown extremely quickly there is some risk that the shutdown job would not be deleted - but in testing on AWS (very fast shutdown), there have not been an observed problems.
  Updates and more information on ways to use this script are here: https://github.com/DarwinJS/CloudyWindowsAutomationCode/blob/master/Undo-WinRMConfig/readme.md
.COMPONENT
   CloudyWindows.io
.ROLE
  Provisioning Automation
.PARAMETER RunImmediately
  Specifies list of semi-colon seperated number ids of local Devices to initialize.  Devices appear in HKLM:SYSTEM\CurrentControlSet\Services\disk\Enum.
.PARAMETER RemoveShutdownScriptConfig
  Cancels running the script at the next shutdown by removing the shutdown configuration and files
.PARAMETER Version
  Emits the version and exits.
.EXAMPLE
  Invoke-Expression (invoke-webrequest -uri 'https://raw.githubusercontent.com/DarwinJS/Undo-WinRMConfig/blob/master/Undo-WinRMConfig/Undo-WinRMConfig.ps1')
  
  Run directly from github with no parameters - sets up shutdown script to reseal winRM.
.EXAMPLE
  Invoke-webrequest -uri 'https://raw.githubusercontent.com/DarwinJS/Undo-WinRMConfig/blob/master/Undo-WinRMConfig/Undo-WinRMConfig.ps1' -outfile $env:public\Undo-WinRMConfig.ps1 ; & $env:public\Undo-WinRMConfig.ps1 -immediately

  Download dynamically from github and run immediately.
#>
Param (
  [switch]$RunImmediately,
  [switch]$RemoveShutdownScriptConfig,
  [switch]$Version
)

$ThisScriptVersion = '1.2.0'

If ($version)
{  
  Write-Host "$ThisScriptVersion"
  Exit 0
}

Function Setup-Undo {

  Write-Host "`r`n`r`nUndo-WinRMConfig Version $ThisScriptVersion`r`n`r`n"

  #This has to work for Win7 (no get-ciminstance) and Nano (no get-wmiobject) - each of which specially construct win32_operatingsystem.version to handle before and after Windows 10 version numbers (which are in different registry keys)
  If ($psversiontable.psversion.major -lt 3)
  { $OSMajorMinorVersionString = @(([version](Get-WMIObject Win32_OperatingSystem).version).major,([version](Get-WMIObject Win32_OperatingSystem).version).minor) -join '.' }
  Else 
  { $OSMajorMinorVersionString = @(([version](Get-CIMInstance Win32_OperatingSystem).version).major,([version](Get-CIMInstance Win32_OperatingSystem).version).minor) -join '.' }

  If (!(Test-Path "variable:Pristine-WSMan-${OSMajorMinorVersionString}.reg"))
  { 
    Throw "Undo-WinRMConfig does not have Pristine WSMan .REG file for your OS version $OSMajorMinorVersionString, if you would like to create and contribute one, please see: "
    Exit 5
  }

  #Build the undo script based on parameters
  [string]$UndoWinRMScript = @'

  If (!$PSScriptRoot) {$PSScriptRoot = Split-Path $MyInvocation.MyCommand.Path -Parent}

  #This has to work for Win7 (no get-ciminstance) and Nano (no get-wmiobject) - each of which specially construct win32_operatingsystem.version to handle before and after Windows 10 version numbers (which are in different registry keys)
  If ($psversiontable.psversion.major -lt 3)
  { $OSMajorMinorVersionString = @(([version](Get-WMIObject Win32_OperatingSystem).version).major,([version](Get-WMIObject Win32_OperatingSystem).version).minor) -join '.' }
  Else 
  { $OSMajorMinorVersionString = @(([version](Get-CIMInstance Win32_OperatingSystem).version).major,([version](Get-CIMInstance Win32_OperatingSystem).version).minor) -join '.' }

  Write-Host "Disabling all Enabled Firewall rules that address port 5985 or 5896 directly"
  $EnabledInboundRMPorts = @(New-object -comObject HNetCfg.FwPolicy2).rules | where-object {($_.LocalPorts -ilike '*5985*') -AND ($_.Enabled -ilike 'True')}
  $EnabledInboundRMPorts += @(New-object -comObject HNetCfg.FwPolicy2).rules | where-object {($_.LocalPorts -ilike '*5986*') -AND ($_.Enabled -ilike 'True')}

  ForEach ($FirewallRuleName in $EnabledInboundRMPorts)
  {
    Write-Host "Disabling firewall rule that addresses remoting: `"$($FirewallRuleName.Name)`""
    netsh advfirewall firewall set rule name="$($FirewallRuleName.Name)" new enable=No
  }

  Write-Host "Undoing changes for Enable-PSRemoting, Enable-WSManCredSSP and winrm configuration commands"

  Write-Host "Remove LocalAccountTokenFilterPolicy added by winrm configuration"
  #This key is symlinked into "Wow6432Node" - both locations are handled by one delete
  $regkeypath ='HKLM:SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\system'
  If (!((Get-ItemProperty $regkeypath).LocalAccountTokenFilterPolicy -eq $null)) 
  {Remove-ItemProperty -path $regkeypath -name LocalAccountTokenFilterPolicy}

  Write-Host "Enable-PSRemoting changes will be removed by undoing WSMAN changes"
  Write-Host "Enable-WSManCredSSP client or server changes will be removed by undoing WSMAN changes"

  #Remove WSMAN Key before importing pristine .REG
  Remove-Item 'HKLM:SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN' -Recurse -Force

  ForEach ($File in (Get-ChildItem "$PSScriptRoot\*${OSMajorMinorVersionString}.reg" | sort-object Name))
  {
    Write-Host "Importing $OSMajorMinorVersionString\$($File.name)"
    reg.exe import "$($File.fullname)"
  }
'@

  If ($RunImmediately)
  {
    Write-Output 'Undoing WinRM Config Right Now (do NOT execute this over remoting or this code will not complete)...'  
    Invoke-Command -ScriptBlock [Scriptblock]::Create($UndoWinRMScript)
    exit 0
  }
  else 
  {
    Write-Output 'Undoing WinRM Config On Next Shutdown'
  }

  #Write a file and call it in a machine shutdown script
  $psScriptsFile = "$env:windir\System32\GroupPolicy\Machine\Scripts\psscripts.ini"
  $Key1 = 'HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Group Policy\Scripts\Shutdown\0'
  $Key2 = 'HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Group Policy\State\Machine\Scripts\Shutdown\0'
  $keys = @($key1,$key2)
  $scriptpath = "$env:windir\System32\GroupPolicy\Machine\Scripts\Shutdown\Undo-WinRMConfig.ps1"
  $scriptfilename = (Split-Path -leaf $scriptpath)
  $ScriptFolder = (Split-Path -parent $scriptpath)
  $FileContents = Get-Variable -name "Pristine-WSMan-${OSMajorMinorVersionString}.reg" -ValueOnly
  Set-Content -Path "$ScriptFolder\Pristine-WSMan-${OSMajorMinorVersionString}.reg" -Value $FileContents

  $selfdeletescript = @"
  Start-Sleep -milliseconds 500
  Remove-Item -Path "$key1" -Force -Recurse -ErrorAction SilentlyContinue
  Remove-Item -Path "$key2" -Force -Recurse -ErrorAction SilentlyContinue
  Remove-Item -Path $scriptpath -Force  -ErrorAction SilentlyContinue
  Get-ChildItem "$env:windir\System32\GroupPolicy\Machine\Scripts\Shutdown\*${OSMajorMinorVersionString}.reg" | remove-item -force
  If (Test-Path $psScriptsFile)
  {
    (Get-Content "$psScriptsFile") -replace '0CmdLine=$scriptfilename', '' | Set-Content "$psScriptsFile"
    (Get-Content "$psScriptsFile") -replace '0Parameters=', '' | Set-Content "$psScriptsFile"
  }
"@

  $selfdeletescript =[Scriptblock]::Create($selfdeletescript)

  If ($RemoveShutdownScriptConfig)
  {
    Write-Host "Removing previously setup shutdown script"
    Invoke-Command -ScriptBlock $selfdeletescript
    exit $?
  }

  #Add the cleanup script block as a scheduled job executed immediately at the end of the shutdown script (if we aren't running immediately)
  $UndoWinRMScript += "Register-ScheduledJob -Name CleanUpWinRM -RunNow -ScheduledJobOption @{RunElevated=$True;ShowInTaskScheduler=$True;RunWithoutNetwork=$True} -ScriptBlock $selfdeletescript"

  Write-Host "Creating $scriptpath, with the following contents:"
  Write-Host '*******************'
  Write-Host "$UndoWinRMScript"
  Write-Host '*******************`r`n`r`n'
  If (!(Test-Path $ScriptFolder)) {New-Item $ScriptFolder -type Directory -force | Out-null}
  Set-Content -path $scriptpath -value $UndoWinRMScript

  Foreach ($Key in $keys)
  {
    Write-Host "Creating $Key"
    New-Item -Path $key -Force | out-null
    New-ItemProperty -Path $key -Name GPO-ID -Value LocalGPO -Force | out-null
    New-ItemProperty -Path $key -Name SOM-ID -Value Local -Force | out-null
    New-ItemProperty -Path $key -Name FileSysPath -Value "$env:windir\System32\GroupPolicy\Machine" -Force | out-null
    New-ItemProperty -Path $key -Name DisplayName -Value "Local Group Policy" -Force | out-null
    New-ItemProperty -Path $key -Name GPOName -Value "Local Group Policy" -Force | out-null
    New-ItemProperty -Path $key -Name PSScriptOrder -Value 1 -PropertyType "DWord" -Force | out-null

    $key = "$key\0"
    New-Item -Path $key -Force | out-null
    New-ItemProperty -Path $key -Name "Script" -Value $scriptfilename -Force | out-null
    New-ItemProperty -Path $key -Name "Parameters" -Value $parameters -Force | out-null
    New-ItemProperty -Path $key -Name "IsPowershell" -Value 1 -PropertyType "DWord" -Force | out-null
    New-ItemProperty -Path $key -Name "ExecTime" -Value 0 -PropertyType "QWord" -Force | out-null
  }

  Write-Host "Updating $psScriptsFile"
  If (!(Test-Path $psScriptsFile)) {New-Item $psScriptsFile -type file -force}
  "[Shutdown]" | Out-File $psScriptsFile
  "0CmdLine=$scriptfilename" | Out-File $psScriptsFile -Append
  "0Parameters=$parameters" | Out-File $psScriptsFile -Append

  Write-Host "`r`n`r`nUndo-WinRMConfig (v${ThisScriptVersion}) is staged to run at next shutdown.  To unstage, run 'Undo-WinRMConfig -RemoveShutdownScriptConfig'"
}

${Pristine-WSMan-10.0.reg} = @'
Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN]
"ServiceStackVersion"="3.0"
"StackVersion"="2.0"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\AutoRestartList]

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\CertMapping]

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Client]

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Listener]

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Listener\*+HTTP]
"Port"=dword:00001761
"uriprefix"="wsman"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin]

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin\Event Forwarding Plugin]
"ConfigXML"="<PlugInConfiguration xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Name=\"Event Forwarding Plugin\" Filename=\"C:\\Windows\\system32\\wevtfwd.dll\" SDKVersion=\"1\" XmlRenderingType=\"text\" UseSharedProcess=\"false\" ProcessIdleTimeoutSec=\"0\" RunAsUser=\"\" RunAsPassword=\"\" AutoRestart=\"false\" Enabled=\"true\" OutputBufferingMode=\"Block\" ><Resources><Resource ResourceUri=\"http://schemas.microsoft.com/wbem/wsman/1/windows/EventLog\" SupportsOptions=\"true\" ><Security Uri=\"\" ExactMatch=\"false\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)(A;;GR;;;ER)S:P(AU;FA;GA;;;WD)(AU;SA;GWGX;;;WD)\" /><Capability Type=\"Subscribe\" SupportsFiltering=\"true\" /></Resource></Resources><Quotas MaxConcurrentUsers=\"2147483647\" MaxConcurrentOperationsPerUser=\"2147483647\" MaxConcurrentOperations=\"2147483647\"/></PlugInConfiguration>"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin\Microsoft.PowerShell]
"ConfigXML"="             <PlugInConfiguration xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Name=\"microsoft.powershell\" Filename=\"%windir%\\system32\\pwrshplugin.dll\" SDKVersion=\"2\" XmlRenderingType=\"text\" Enabled=\"true\" >                 <InitializationParameters>                     <Param Name=\"PSVersion\" Value=\"5.1\"/>                 </InitializationParameters>                 <Resources>                     <Resource ResourceUri=\"http://schemas.microsoft.com/powershell/microsoft.powershell\" SupportsOptions=\"true\" ExactMatch=\"true\">                         <Security xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Uri=\"http://schemas.microsoft.com/powershell/microsoft.powershell\" ExactMatch=\"true\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;IU)(A;;GA;;;RM)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)\"/>                         <Capability Type=\"Shell\"/>                     </Resource>                 </Resources>   <Quotas MaxMemoryPerShellMB=\"2147483647\" MaxIdleTimeoutms=\"2147483647\" MaxConcurrentUsers=\"2147483647\" IdleTimeoutms=\"7200000\" MaxProcessesPerShell=\"2147483647\" MaxConcurrentCommandsPerShell=\"2147483647\" MaxShells=\"2147483647\" MaxShellsPerUser=\"2147483647\"/>             </PlugInConfiguration>"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin\Microsoft.PowerShell.Workflow]
"ConfigXML"="             <PlugInConfiguration xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Name=\"microsoft.powershell.workflow\" Filename=\"%windir%\\system32\\pwrshplugin.dll\" SDKVersion=\"2\" XmlRenderingType=\"text\" UseSharedProcess=\"true\" ProcessIdleTimeoutSec=\"1209600\" RunAsUser=\"\" RunAsPassword=\"\" AutoRestart=\"false\"     Enabled=\"true\" >                 <InitializationParameters>                     <Param Name=\"PSVersion\" Value=\"5.1\"/>                     <Param Name=\"AssemblyName\" Value=\"Microsoft.PowerShell.Workflow.ServiceCore, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL\"/>                     <Param Name=\"PSSessionConfigurationTypeName\" Value=\"Microsoft.PowerShell.Workflow.PSWorkflowSessionConfiguration\"/>                     <Param Name=\"SessionConfigurationData\"                          Value=\"                             &lt;SessionConfigurationData&gt;                                 &lt;Param Name=&quot;ModulesToImport&quot; Value=&quot;%windir%\\system32\\windowspowershell\\v1.0\\Modules\\PSWorkflow&quot;/&gt;                                 &lt;Param Name=&quot;PrivateData&quot;&gt;                                     &lt;PrivateData&gt;                                         &lt;Param Name=&quot;enablevalidation&quot; Value=&quot;true&quot; /&gt;                                     &lt;/PrivateData&gt;                                 &lt;/Param&gt;                             &lt;/SessionConfigurationData&gt;                         \"                     />                 </InitializationParameters>                 <Resources>                     <Resource ResourceUri=\"http://schemas.microsoft.com/powershell/microsoft.powershell.workflow\" SupportsOptions=\"true\" ExactMatch=\"true\">                         <Security xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Uri=\"http://schemas.microsoft.com/powershell/microsoft.powershell.workflow\" ExactMatch=\"true\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;RM)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)\"/>                         <Capability Type=\"Shell\"/>                     </Resource>                 </Resources>     <Quotas MaxMemoryPerShellMB=\"2147483647\" MaxIdleTimeoutms=\"2147483647\" MaxConcurrentUsers=\"2147483647\" IdleTimeoutms=\"7200000\" MaxProcessesPerShell=\"2147483647\" MaxConcurrentCommandsPerShell=\"2147483647\" MaxShells=\"2147483647\" MaxShellsPerUser=\"2147483647\"/>             </PlugInConfiguration>"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin\Microsoft.PowerShell32]
"ConfigXML"="<PlugInConfiguration xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Name=\"microsoft.powershell32\" Filename=\"%windir%\\system32\\pwrshplugin.dll\" SDKVersion=\"2\" XmlRenderingType=\"text\" Architecture=\"32\" Enabled=\"true\" >                         <InitializationParameters>                             <Param Name=\"PSVersion\" Value=\"5.1\"/>                         </InitializationParameters>                         <Resources>                             <Resource ResourceUri=\"http://schemas.microsoft.com/powershell/microsoft.powershell32\" SupportsOptions=\"true\" ExactMatch=\"true\">                                 <Security xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Uri=\"http://schemas.microsoft.com/powershell/microsoft.powershell32\" ExactMatch=\"true\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;IU)(A;;GA;;;RM)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)\"/>                                 <Capability Type=\"Shell\"/>                             </Resource>                         </Resources>    <Quotas MaxMemoryPerShellMB=\"2147483647\" MaxIdleTimeoutms=\"2147483647\" MaxConcurrentUsers=\"2147483647\" IdleTimeoutms=\"7200000\" MaxProcessesPerShell=\"2147483647\" MaxConcurrentCommandsPerShell=\"2147483647\" MaxShells=\"2147483647\" MaxShellsPerUser=\"2147483647\"/>                     </PlugInConfiguration>"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin\Microsoft.Windows.ServerManagerWorkflows]
"ConfigXML"="                     <PlugInConfiguration xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Name=\"microsoft.windows.servermanagerworkflows\" Filename=\"C:\\Windows\\system32\\pwrshplugin.dll\" SDKVersion=\"2\" XmlRenderingType=\"text\" UseSharedProcess=\"true\" Enabled=\"true\" RunAsUser=\"\" RunAsPassword=\"\" AutoRestart=\"false\"  >                         <InitializationParameters>                             <Param Name=\"PSVersion\" Value=\"3.0\"/>                             <Param Name=\"AssemblyName\" Value=\"Microsoft.Windows.ServerManager.Common, Version=10.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL\"/>                             <Param Name=\"PSSessionConfigurationTypeName\" Value=\"Microsoft.Windows.ServerManager.Common.Workflow.WorkflowSessionConfiguration\"/>                             <Param Name=\"SessionConfigurationData\"                                 Value=\"                                     &lt;SessionConfigurationData&gt;                                         &lt;Param Name=&quot;ModulesToImport&quot; Value=&quot;C:\\Windows\\\\system32\\\\ServerManagerInternal,C:\\Windows\\\\system32\\\\windowspowershell\\\\v1.0\\\\Modules\\\\PSWorkflow&quot; /&gt;                                         &lt;Param Name=&quot;PrivateData&quot;&gt;                                             &lt;PrivateData&gt;                                                 &lt;Param Name=&quot;allowedactivity&quot; Value=&quot;*&quot; /&gt;                                                 &lt;Param Name=&quot;outofprocessactivity&quot; Value=&quot;&quot; /&gt;                                             &lt;/PrivateData&gt;                                         &lt;/Param&gt;                                     &lt;/SessionConfigurationData&gt;                                 \"                             />                         </InitializationParameters>                         <Resources>                             <Resource ResourceUri=\"http://schemas.microsoft.com/powershell/microsoft.windows.servermanagerworkflows\" SupportsOptions=\"true\" ExactMatch=\"true\">                                 <Security xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Uri=\"http://schemas.microsoft.com/powershell/microsoft.windows.servermanagerworkflows\" ExactMatch=\"true\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;IU)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)\"/>                                 <Capability Type=\"Shell\"/>                             </Resource>                         </Resources>                         <Quotas MaxIdleTimeoutms=\"180000\" IdleTimeoutms=\"180000\" MaxConcurrentUsers=\"5\" MaxMemoryPerShellMB=\"2000\" MaxShells=\"100\" MaxProcessesPerShell=\"45\" MaxShellsPerUser=\"25\" MaxConcurrentCommandsPerShell=\"5000\"/>                     </PlugInConfiguration>"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin\SEL Plugin]
"ConfigXML"="<PlugInConfiguration xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Name=\"SEL Plugin\" Filename=\"C:\\Windows\\system32\\wsmselpl.dll\" SDKVersion=\"1\" XmlRenderingType=\"text\" UseSharedProcess=\"false\" ProcessIdleTimeoutSec=\"0\" RunAsUser=\"\" RunAsPassword=\"\" AutoRestart=\"false\" Enabled=\"true\" OutputBufferingMode=\"Block\" > <Resources> <Resource ResourceUri=\"http://schemas.microsoft.com/wbem/wsman/1/logrecord/sel\" SupportsOptions=\"true\" > <Security Uri=\"\" ExactMatch=\"false\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;S-1-5-80-4059739203-877974739-1245631912-527174227-2996563517)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)\" /> <Capability Type=\"Subscribe\" /> </Resource> </Resources> <Quotas MaxConcurrentUsers=\"2147483647\" MaxConcurrentOperationsPerUser=\"2147483647\" MaxConcurrentOperations=\"2147483647\"/> </PlugInConfiguration>"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin\WMI Provider]
"ConfigXML"="<PlugInConfiguration xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Name=\"WMI Provider\" Filename=\"C:\\Windows\\system32\\WsmWmiPl.dll\" SDKVersion=\"1\" XmlRenderingType=\"text\" UseSharedProcess=\"false\" ProcessIdleTimeoutSec=\"0\" RunAsUser=\"\" RunAsPassword=\"\" AutoRestart=\"false\" Enabled=\"true\" OutputBufferingMode=\"Block\" ><Resources><Resource ResourceUri=\"http://schemas.microsoft.com/wbem/wsman/1/wmi\" SupportsOptions=\"true\" ><Security Uri=\"\" ExactMatch=\"false\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;IU)(A;;GA;;;RM)S:P(AU;FA;GA;;;WD)(AU;SA;GWGX;;;WD)\" /><Capability Type=\"Identify\" /><Capability Type=\"Get\" SupportsFragment=\"true\" /><Capability Type=\"Put\" SupportsFragment=\"true\" /><Capability Type=\"Invoke\" /><Capability Type=\"Create\" /><Capability Type=\"Delete\" /><Capability Type=\"Enumerate\" SupportsFiltering=\"true\"/><Capability Type=\"Subscribe\" SupportsFiltering=\"true\"/></Resource><Resource ResourceUri=\"http://schemas.dmtf.org/wbem/wscim/1/cim-schema\" SupportsOptions=\"true\" ><Security Uri=\"\" ExactMatch=\"false\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;IU)(A;;GA;;;RM)S:P(AU;FA;GA;;;WD)(AU;SA;GWGX;;;WD)\" /><Capability Type=\"Get\" SupportsFragment=\"true\" /><Capability Type=\"Put\" SupportsFragment=\"true\" /><Capability Type=\"Invoke\" /><Capability Type=\"Create\" /><Capability Type=\"Delete\" /><Capability Type=\"Enumerate\"/><Capability Type=\"Subscribe\" SupportsFiltering=\"true\"/></Resource><Resource ResourceUri=\"http://schemas.dmtf.org/wbem/wscim/1/*\" SupportsOptions=\"true\" ExactMatch=\"true\" ><Security Uri=\"\" ExactMatch=\"false\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;IU)(A;;GA;;;RM)S:P(AU;FA;GA;;;WD)(AU;SA;GWGX;;;WD)\" /><Capability Type=\"Enumerate\" SupportsFiltering=\"true\"/><Capability Type=\"Subscribe\"SupportsFiltering=\"true\"/></Resource><Resource ResourceUri=\"http://schemas.dmtf.org/wbem/cim-xml/2/cim-schema/2/*\" SupportsOptions=\"true\" ExactMatch=\"true\"><Security Uri=\"\" ExactMatch=\"false\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;IU)(A;;GA;;;RM)S:P(AU;FA;GA;;;WD)(AU;SA;GWGX;;;WD)\" /><Capability Type=\"Get\" SupportsFragment=\"false\"/><Capability Type=\"Enumerate\" SupportsFiltering=\"true\"/></Resource></Resources><Quotas MaxConcurrentUsers=\"2147483647\" MaxConcurrentOperationsPerUser=\"2147483647\" MaxConcurrentOperations=\"2147483647\"/></PlugInConfiguration>"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\SafeClientList]
"WSManSafeClientList"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,01

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Service]
"allow_remote_requests"=dword:00000001

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\WinRS]

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\WinRS\CustomRemoteShell]

'@

${Pristine-WSMan-6.3.reg} = @'
Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN]
"StackVersion"="2.0"
"ServiceStackVersion"="3.0"
"WtrPresent"=dword:00000000
"UpdatedConfig"="E6F6821F-51CC-4FEC-8E46-40C75C0CAD27"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\AutoRestartList]

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\CertMapping]

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Client]

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Listener]

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Listener\*+HTTP]
"hostname"=""
"uriprefix"="wsman"
"certThumbprint"=""
"Port"=dword:00001761
"enabled"=dword:00000001

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin]

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin\Event Forwarding Plugin]
"ConfigXML"="<PlugInConfiguration xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Name=\"Event Forwarding Plugin\" Filename=\"C:\\Windows\\system32\\wevtfwd.dll\" SDKVersion=\"1\" XmlRenderingType=\"text\" UseSharedProcess=\"false\" ProcessIdleTimeoutSec=\"0\" RunAsUser=\"\" RunAsPassword=\"\" AutoRestart=\"false\" Enabled=\"true\" OutputBufferingMode=\"Block\" ><Resources><Resource ResourceUri=\"http://schemas.microsoft.com/wbem/wsman/1/windows/EventLog\" SupportsOptions=\"true\" ><Security Uri=\"\" ExactMatch=\"false\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)(A;;GR;;;ER)S:P(AU;FA;GA;;;WD)(AU;SA;GWGX;;;WD)\" /><Capability Type=\"Subscribe\" SupportsFiltering=\"true\" /></Resource></Resources><Quotas MaxConcurrentUsers=\"100\" MaxConcurrentOperationsPerUser=\"15\" MaxConcurrentOperations=\"1500\"/></PlugInConfiguration>"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin\Microsoft.PowerShell]
"ConfigXML"="<PlugInConfiguration xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Name=\"microsoft.powershell\" Filename=\"%windir%\\system32\\pwrshplugin.dll\" SDKVersion=\"2\" XmlRenderingType=\"text\" Enabled=\"true\" Architecture=\"64\" UseSharedProcess=\"false\" ProcessIdleTimeoutSec=\"0\" RunAsUser=\"\" RunAsPassword=\"\" RunAsVirtualAccount=\"false\" RunAsVirtualAccountGroups=\"\" AutoRestart=\"false\" OutputBufferingMode=\"Block\"><InitializationParameters><Param Name=\"PSVersion\" Value=\"5.0\"/></InitializationParameters><Resources><Resource ResourceUri=\"http://schemas.microsoft.com/powershell/microsoft.powershell\" SupportsOptions=\"true\" ExactMatch=\"true\"><Security xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Uri=\"http://schemas.microsoft.com/powershell/microsoft.powershell\" ExactMatch=\"true\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;IU)(A;;GA;;;RM)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)\"/><Capability Type=\"Shell\"/></Resource></Resources><Quotas MaxMemoryPerShellMB=\"1024\" MaxIdleTimeoutms=\"2147483647\" MaxConcurrentUsers=\"5\" IdleTimeoutms=\"7200000\" MaxProcessesPerShell=\"15\" MaxConcurrentCommandsPerShell=\"1000\" MaxShells=\"25\" MaxShellsPerUser=\"25\"/></PlugInConfiguration>"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin\Microsoft.PowerShell.Workflow]
"ConfigXML"="<PlugInConfiguration xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Name=\"microsoft.powershell.workflow\" Filename=\"%windir%\\system32\\pwrshplugin.dll\" SDKVersion=\"2\" XmlRenderingType=\"text\" UseSharedProcess=\"true\" ProcessIdleTimeoutSec=\"1209600\" RunAsUser=\"\" RunAsPassword=\"\" AutoRestart=\"false\" Enabled=\"true\" Architecture=\"64\" RunAsVirtualAccount=\"false\" RunAsVirtualAccountGroups=\"\" OutputBufferingMode=\"Block\"><InitializationParameters><Param Name=\"PSVersion\" Value=\"5.0\"/><Param Name=\"AssemblyName\" Value=\"Microsoft.PowerShell.Workflow.ServiceCore, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL\"/><Param Name=\"PSSessionConfigurationTypeName\" Value=\"Microsoft.PowerShell.Workflow.PSWorkflowSessionConfiguration\"/><Param Name=\"SessionConfigurationData\" Value=\"                             &lt;SessionConfigurationData&gt;                                 &lt;Param Name=&quot;ModulesToImport&quot; Value=&quot;%windir%\\system32\\windowspowershell\\v1.0\\Modules\\PSWorkflow&quot;/&gt;                                 &lt;Param Name=&quot;PrivateData&quot;&gt;                                     &lt;PrivateData&gt;                                         &lt;Param Name=&quot;enablevalidation&quot; Value=&quot;true&quot; /&gt;                                     &lt;/PrivateData&gt;                                 &lt;/Param&gt;                             &lt;/SessionConfigurationData&gt;                         \"/></InitializationParameters><Resources><Resource ResourceUri=\"http://schemas.microsoft.com/powershell/microsoft.powershell.workflow\" SupportsOptions=\"true\" ExactMatch=\"true\"><Security xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Uri=\"http://schemas.microsoft.com/powershell/microsoft.powershell.workflow\" ExactMatch=\"true\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;RM)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)\"/><Capability Type=\"Shell\"/></Resource></Resources><Quotas MaxMemoryPerShellMB=\"1024\" MaxIdleTimeoutms=\"2147483647\" MaxConcurrentUsers=\"5\" IdleTimeoutms=\"7200000\" MaxProcessesPerShell=\"15\" MaxConcurrentCommandsPerShell=\"1000\" MaxShells=\"25\" MaxShellsPerUser=\"25\"/></PlugInConfiguration>"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin\Microsoft.PowerShell32]
"ConfigXML"="<PlugInConfiguration xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Name=\"microsoft.powershell32\" Filename=\"%windir%\\system32\\pwrshplugin.dll\" SDKVersion=\"2\" XmlRenderingType=\"text\" Architecture=\"32\" Enabled=\"true\" UseSharedProcess=\"false\" ProcessIdleTimeoutSec=\"0\" RunAsUser=\"\" RunAsPassword=\"\" RunAsVirtualAccount=\"false\" RunAsVirtualAccountGroups=\"\" AutoRestart=\"false\" OutputBufferingMode=\"Block\"><InitializationParameters><Param Name=\"PSVersion\" Value=\"5.0\"/></InitializationParameters><Resources><Resource ResourceUri=\"http://schemas.microsoft.com/powershell/microsoft.powershell32\" SupportsOptions=\"true\" ExactMatch=\"true\"><Security xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Uri=\"http://schemas.microsoft.com/powershell/microsoft.powershell32\" ExactMatch=\"true\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;IU)(A;;GA;;;RM)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)\"/><Capability Type=\"Shell\"/></Resource></Resources><Quotas MaxMemoryPerShellMB=\"1024\" MaxIdleTimeoutms=\"2147483647\" MaxConcurrentUsers=\"5\" IdleTimeoutms=\"7200000\" MaxProcessesPerShell=\"15\" MaxConcurrentCommandsPerShell=\"1000\" MaxShells=\"25\" MaxShellsPerUser=\"25\"/></PlugInConfiguration>"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin\Microsoft.Windows.ServerManagerWorkflows]
"ConfigXML"="<PlugInConfiguration xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Name=\"microsoft.windows.servermanagerworkflows\" Filename=\"C:\\Windows\\system32\\pwrshplugin.dll\" SDKVersion=\"2\" XmlRenderingType=\"text\" UseSharedProcess=\"true\" Enabled=\"true\" RunAsUser=\"\" RunAsPassword=\"\" AutoRestart=\"false\" Architecture=\"64\" ProcessIdleTimeoutSec=\"0\" RunAsVirtualAccount=\"false\" RunAsVirtualAccountGroups=\"\" OutputBufferingMode=\"Block\"><InitializationParameters><Param Name=\"PSVersion\" Value=\"3.0\"/><Param Name=\"AssemblyName\" Value=\"Microsoft.Windows.ServerManager.Common, Version=6.3.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL\"/><Param Name=\"PSSessionConfigurationTypeName\" Value=\"Microsoft.Windows.ServerManager.Common.Workflow.WorkflowSessionConfiguration\"/><Param Name=\"SessionConfigurationData\" Value=\"                                     &lt;SessionConfigurationData&gt;                                         &lt;Param Name=&quot;ModulesToImport&quot; Value=&quot;C:\\Windows\\\\system32\\\\ServerManagerInternal,C:\\Windows\\\\system32\\\\windowspowershell\\\\v1.0\\\\Modules\\\\PSWorkflow&quot; /&gt;                                         &lt;Param Name=&quot;PrivateData&quot;&gt;                                             &lt;PrivateData&gt;                                                 &lt;Param Name=&quot;allowedactivity&quot; Value=&quot;*&quot; /&gt;                                                 &lt;Param Name=&quot;outofprocessactivity&quot; Value=&quot;&quot; /&gt;                                             &lt;/PrivateData&gt;                                         &lt;/Param&gt;                                     &lt;/SessionConfigurationData&gt;                                 \"/></InitializationParameters><Resources><Resource ResourceUri=\"http://schemas.microsoft.com/powershell/microsoft.windows.servermanagerworkflows\" SupportsOptions=\"true\" ExactMatch=\"true\"><Security xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Uri=\"http://schemas.microsoft.com/powershell/microsoft.windows.servermanagerworkflows\" ExactMatch=\"true\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;IU)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)\"/><Capability Type=\"Shell\"/></Resource></Resources><Quotas MaxIdleTimeoutms=\"180000\" IdleTimeoutms=\"180000\" MaxConcurrentUsers=\"5\" MaxMemoryPerShellMB=\"2000\" MaxShells=\"100\" MaxProcessesPerShell=\"45\" MaxShellsPerUser=\"25\" MaxConcurrentCommandsPerShell=\"5000\"/></PlugInConfiguration>"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin\SEL Plugin]
"ConfigXML"="<PlugInConfiguration xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Name=\"SEL Plugin\" Filename=\"C:\\Windows\\system32\\wsmselpl.dll\" SDKVersion=\"1\" XmlRenderingType=\"text\" UseSharedProcess=\"false\" ProcessIdleTimeoutSec=\"0\" RunAsUser=\"\" RunAsPassword=\"\" AutoRestart=\"false\" Enabled=\"true\" OutputBufferingMode=\"Block\" > <Resources> <Resource ResourceUri=\"http://schemas.microsoft.com/wbem/wsman/1/logrecord/sel\" SupportsOptions=\"true\" > <Security Uri=\"\" ExactMatch=\"false\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;S-1-5-80-4059739203-877974739-1245631912-527174227-2996563517)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)\" /> <Capability Type=\"Subscribe\" /> </Resource> </Resources> <Quotas MaxConcurrentUsers=\"100\" MaxConcurrentOperationsPerUser=\"15\" MaxConcurrentOperations=\"1500\"/> </PlugInConfiguration>"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin\WMI Provider]
"ConfigXML"="<PlugInConfiguration xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Name=\"WMI Provider\" Filename=\"C:\\Windows\\system32\\WsmWmiPl.dll\" SDKVersion=\"1\" XmlRenderingType=\"text\" UseSharedProcess=\"false\" ProcessIdleTimeoutSec=\"0\" RunAsUser=\"\" RunAsPassword=\"\" AutoRestart=\"false\" Enabled=\"true\" OutputBufferingMode=\"Block\" ><Resources><Resource ResourceUri=\"http://schemas.microsoft.com/wbem/wsman/1/wmi\" SupportsOptions=\"true\" ><Security Uri=\"\" ExactMatch=\"false\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;IU)(A;;GA;;;RM)S:P(AU;FA;GA;;;WD)(AU;SA;GWGX;;;WD)\" /><Capability Type=\"Identify\" /><Capability Type=\"Get\" SupportsFragment=\"true\" /><Capability Type=\"Put\" SupportsFragment=\"true\" /><Capability Type=\"Invoke\" /><Capability Type=\"Create\" /><Capability Type=\"Delete\" /><Capability Type=\"Enumerate\" SupportsFiltering=\"true\"/><Capability Type=\"Subscribe\" SupportsFiltering=\"true\"/></Resource><Resource ResourceUri=\"http://schemas.dmtf.org/wbem/wscim/1/cim-schema\" SupportsOptions=\"true\" ><Security Uri=\"\" ExactMatch=\"false\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;IU)(A;;GA;;;RM)S:P(AU;FA;GA;;;WD)(AU;SA;GWGX;;;WD)\" /><Capability Type=\"Get\" SupportsFragment=\"true\" /><Capability Type=\"Put\" SupportsFragment=\"true\" /><Capability Type=\"Invoke\" /><Capability Type=\"Create\" /><Capability Type=\"Delete\" /><Capability Type=\"Enumerate\"/><Capability Type=\"Subscribe\" SupportsFiltering=\"true\"/></Resource><Resource ResourceUri=\"http://schemas.dmtf.org/wbem/wscim/1/*\" SupportsOptions=\"true\" ExactMatch=\"true\" ><Security Uri=\"\" ExactMatch=\"false\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;IU)(A;;GA;;;RM)S:P(AU;FA;GA;;;WD)(AU;SA;GWGX;;;WD)\" /><Capability Type=\"Enumerate\" SupportsFiltering=\"true\"/><Capability Type=\"Subscribe\"SupportsFiltering=\"true\"/></Resource><Resource ResourceUri=\"http://schemas.dmtf.org/wbem/cim-xml/2/cim-schema/2/*\" SupportsOptions=\"true\" ExactMatch=\"true\"><Security Uri=\"\" ExactMatch=\"false\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;IU)(A;;GA;;;RM)S:P(AU;FA;GA;;;WD)(AU;SA;GWGX;;;WD)\" /><Capability Type=\"Get\" SupportsFragment=\"false\"/><Capability Type=\"Enumerate\" SupportsFiltering=\"true\"/></Resource></Resources><Quotas MaxConcurrentUsers=\"100\" MaxConcurrentOperationsPerUser=\"100\" MaxConcurrentOperations=\"1500\"/></PlugInConfiguration>"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\SafeClientList]

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Service]
"allow_remote_requests"=dword:00000001

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\WinRS]

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\WinRS\CustomRemoteShell]

'@

${Pristine-WSMan-6.1.reg} = @'
Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN]
"StackVersion"="2.0"
"SupportsCompatListeners"=dword:00000001
"UpdatedConfig"="58262FF8-3F83-4B48-A1FB-054FA5700982"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\CertMapping]

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Client]

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Listener]

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin]

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin\Event Forwarding Plugin]
"ConfigXML"="<PlugInConfiguration xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Name=\"Event Forwarding Plugin\" Filename=\"%systemroot%\\system32\\wevtfwd.dll\" SDKVersion=\"1\" XmlRenderingType=\"text\" ><Resources><Resource ResourceUri=\"http://schemas.microsoft.com/wbem/wsman/1/windows/EventLog\" SupportsOptions=\"true\" ><Security Uri=\"\" ExactMatch=\"false\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)(A;;GR;;;ER)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)\" /><Capability Type=\"Subscribe\" SupportsFiltering=\"true\" /></Resource></Resources></PlugInConfiguration>"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin\Microsoft.PowerShell]
"ConfigXML"="             <PlugInConfiguration xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Name=\"microsoft.powershell\" Filename=\"%windir%\\system32\\pwrshplugin.dll\" SDKVersion=\"1\" XmlRenderingType=\"text\" >                 <InitializationParameters>                     <Param Name=\"PSVersion\" Value=\"2.0\"/>                 </InitializationParameters>                 <Resources>                     <Resource ResourceUri=\"http://schemas.microsoft.com/powershell/microsoft.powershell\" SupportsOptions=\"true\" ExactMatch=\"true\">                         <Security xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Uri=\"http://schemas.microsoft.com/powershell/microsoft.powershell\" ExactMatch=\"true\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)\"/>                         <Capability Type=\"Shell\"/>                     </Resource>                 </Resources>             </PlugInConfiguration>"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin\Microsoft.ServerManager]
"ConfigXML"="               <PlugInConfiguration xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Name=\"microsoft.ServerManager\" Filename=\"%windir%\\system32\\pwrshplugin.dll\" SDKVersion=\"1\" XmlRenderingType=\"text\" >                   <InitializationParameters>                       <Param Name=\"PSVersion\" Value=\"2.0\"/>                       <Param Name=\"AssemblyName\" Value=\"Microsoft.Windows.ServerManager.PowerShell, Version=6.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL\" />                       <Param Name=\"PSSessionConfigurationTypeName\" Value=\"Microsoft.Windows.ServerManager.Commands.PowerShellCustomShell\" />                   </InitializationParameters>                   <Resources>                       <Resource ResourceUri=\"http://schemas.microsoft.com/powershell/microsoft.ServerManager\" SupportsOptions=\"true\" ExactMatch=\"true\">                           <Security xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Uri=\"http://schemas.microsoft.com/powershell/microsoft.ServerManager\" ExactMatch=\"true\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)\"/>                           <Capability Type=\"Shell\"/>                       </Resource>                   </Resources>               </PlugInConfiguration>"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin\SEL Plugin]
"ConfigXML"="<PlugInConfiguration xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Name=\"SEL Plugin\" Filename=\"%systemroot%\\system32\\wsmselpl.dll\" SDKVersion=\"1\" XmlRenderingType=\"text\" ><Resources><Resource ResourceUri=\"http://schemas.microsoft.com/wbem/wsman/1/logrecord/sel\" SupportsOptions=\"true\" ><Security Uri=\"\" ExactMatch=\"false\" Sddl=\"O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;S-1-5-80-4059739203-877974739-1245631912-527174227-2996563517)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)\" /><Capability Type=\"Subscribe\" /></Resource></Resources></PlugInConfiguration>"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Plugin\WMI Provider]
"ConfigXML"="<PlugInConfiguration xmlns=\"http://schemas.microsoft.com/wbem/wsman/1/config/PluginConfiguration\" Name=\"WMI Provider\" Filename=\"%systemroot%\\system32\\WsmWmiPl.dll\" SDKVersion=\"1\" XmlRenderingType=\"text\" ><Resources><Resource ResourceUri=\"http://schemas.microsoft.com/wbem/wsman/1/wmi\" SupportsOptions=\"true\" ><Capability Type=\"Get\" SupportsFragment=\"true\" /><Capability Type=\"Put\" SupportsFragment=\"true\" /><Capability Type=\"Invoke\" /><Capability Type=\"Enumerate\" SupportsFiltering=\"true\"/></Resource><Resource ResourceUri=\"http://schemas.dmtf.org/wbem/wscim/1/cim-schema\" SupportsOptions=\"true\" ><Capability Type=\"Get\" SupportsFragment=\"true\" /><Capability Type=\"Put\" SupportsFragment=\"true\" /><Capability Type=\"Invoke\" /><Capability Type=\"Enumerate\" /></Resource><Resource ResourceUri=\"http://schemas.dmtf.org/wbem/wscim/1/*\" SupportsOptions=\"true\" ExactMatch=\"true\" ><Capability Type=\"Enumerate\" SupportsFiltering=\"true\"/></Resource></Resources></PlugInConfiguration>"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\Service]

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\WinRS]

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN\WinRS\CustomRemoteShell]

'@

Setup-Undo

Virus Scan Results

undo-winrmconfig-during-shutdown.1.2.0.20191031.nupkg (0d0678d7aec1) - ## / 61

In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).

Chocolatey Pro provides runtime protection from possible malware.

Version History

Version	Downloads	Last Updated	Status
undo-winrmconfig-during-shutdown (Install) 1.2.0.20191031	12186	Thursday, October 31, 2019	Approved
undo-winrmconfig-during-shutdown (Install) 1.2.0	850	Wednesday, September 5, 2018	Approved
undo-winrmconfig-during-shutdown (Install) 1.1.9-alpha2	251	Thursday, July 12, 2018	Exempted
undo-winrmconfig-during-shutdown (Install) 1.1.8-alpha2	289	Sunday, June 24, 2018	Exempted
undo-winrmconfig-during-shutdown (Install) 1.1.8-alpha1	260	Thursday, June 21, 2018	Exempted

Dependencies

- chocolatey-core.extension

Discussion for the undo-winrmconfig-during-shutdown (Install) Package

Ground Rules:

This discussion is only about undo-winrmconfig-during-shutdown (Install) and the undo-winrmconfig-during-shutdown (Install) package. If you have feedback for Chocolatey, please contact the Google Group.
This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
Tell us what you love about the package or undo-winrmconfig-during-shutdown (Install), or tell us what needs improvement.
Share your experiences with the package, or extra configuration or gotchas that you've found.
If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.

Resources

Events

Courses

13,836

12,186

31 Oct 2019

undo-winrmconfig-during-shutdown (Install)

undo-winrmconfig-during-shutdown (Install) 1.2.0.20191031

All Checks are Passing

Deployment Method: Individual Install, Upgrade, & Uninstall

Deployment Method:

1. Enter Your Internal Repository Url

2. Setup Your Environment

1. Ensure you are set for organizational deployment

2. Get the package into your environment

3. Copy Your Script

4. If applicable - Chocolatey configuration/installation

Ground Rules: