Step 1: Review Your Packages

Step 2: Choose Your Integration Method

Step 3: Copy Your Script or Download Config

Option 1: Copy Script

Option 2: Download Config

Step 4: Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the packages and push them to a repository
  Download Packages

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the packages:
  Download Packages
- Follow manual internalization instructions
Package Internalizer (C4B)
- Run: (additional options)
- For package and dependencies run:
- Automate package internalization

Step 5: Copy Your Script

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###

#### We initialize a few things that are needed by this script - there are no other requirements.
$ErrorActionPreference = "Stop"

#### Set TLS 1.2 (3072) as that is the minimum required by various up-to-date repositories.
#### Use integers because the enumeration value for TLS 1.2 won't exist
#### in .NET 4.0, even though they are addressable if .NET 4.5+ is
#### installed (.NET 4.5 is an in-place upgrade).
[System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072

#### We use this variable for future REST calls.
$RequestArguments = @{
    UseBasicParsing = $true
}

## 2. TOP LEVEL VARIABLES ##

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# $NugetRepositoryCredential = [PSCredential]::new(
#     "username",
#     ("password" | ConvertTo-SecureString -AsPlainText -Force)
# )
# $RequestArguments.Credential = $NugetRepositoryCredential

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it
$ChocolateyDownloadUrl = "$($NugetRepositoryUrl.TrimEnd('/'))/package/chocolatey.2.2.2.nupkg"

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# $ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

#### Download the Nupkg, appending .zip to the filename to handle archive cmdlet limitations
if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    $TempDirectory = Join-Path $env:Temp "chocolateyInstall"
    if (-not (Test-Path $TempDirectory -PathType Container)) {
        $null = New-Item -Path $TempDirectory -ItemType Directory
    }
    $DownloadedNupkg = Join-Path $TempDirectory "$(Split-Path $ChocolateyDownloadUrl -Leaf).zip"
    Invoke-WebRequest -Uri $ChocolateyDownloadUrl -OutFile $DownloadedNupkg @RequestArguments

    #### Extract the Nupkg, and run the chocolateyInstall script
    if (Get-Command Microsoft.PowerShell.Archive\Expand-Archive -ErrorAction SilentlyContinue) {
        Microsoft.PowerShell.Archive\Expand-Archive -Path $DownloadedNupkg -DestinationPath $TempDirectory -Force
    } else {
        # PowerShell versions <4.0 do not have this function available
        try {
            $shellApplication = New-Object -ComObject Shell.Application
            $zipPackage = $shellApplication.NameSpace($DownloadedNupkg)
            $destinationFolder = $shellApplication.NameSpace($TempDirectory)
            $destinationFolder.CopyHere($zipPackage.Items(), 0x10)
        } catch {
            Write-Warning "Unable to unzip package using built-in compression."
            throw $_
        }
    }

    & $(Join-Path $TempDirectory "tools\chocolateyInstall.ps1")
}

if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    refreshenv
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# choco feature enable -n useFipsCompliantChecksums

### b. Apply Recommended Configuration ###
#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
choco config set --name cacheLocation --value C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
choco config set --name commandExecutionTimeoutSeconds --value 14400

#### Turn off download progress when running choco through integrations
choco feature disable --name showDownloadProgress

### c. Sources ###
#### Remove the default community package repository source
choco source list --limitoutput | ConvertFrom-Csv -Header 'Name', 'Location' -Delimiter '|' | ForEach-Object {
    if ($_.Location -eq 'https://community.chocolatey.org/api/v2/') {
        choco source remove -n $_.Name
    }
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
if ($NugetRepositoryCredential) {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --user $NugetRepositoryCredential.UserName --password $NugetRepositoryCredential.GetNetworkCredential().Password --priority 1
} else {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --priority 1
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
choco upgrade chocolatey --confirm

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
choco install chocolatey-license --source $NugetRepositoryUrl --confirm

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco source disable --name chocolatey.licensed
} else {
    Write-Warning "Not disabling 'chocolatey.licensed' feed, as Chocolatey-License has not been installed."
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco install chocolatey.extension --source $NugetRepositoryUrl --confirm
} else {
    Write-Warning "Not installing 'chocolatey.extension', as Chocolatey-License has not been installed."
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
choco feature disable --name showNonElevatedWarnings
choco feature enable --name useBackgroundService
choco feature enable --name useBackgroundServiceWithNonAdministratorsOnly
choco feature enable --name allowBackgroundServiceUninstallsFromUserInstallsOnly
choco config set --name allowedBackgroundServiceCommands --value "install,upgrade,uninstall"

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if ($ChocolateyCentralManagementUrl) {
    choco install chocolatey-agent --source $NugetRepositoryUrl --confirm
    choco config set --name CentralManagementServiceUrl --value $ChocolateyCentralManagementUrl
    if ($ChocolateyCentralManagementClientSalt) {
        choco config set --name centralManagementClientCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementClientSalt
    }
    if ($ChocolateyCentralManagementServiceSalt) {
        choco config set --name centralManagementServiceCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementServiceSalt
    }
    choco feature enable --name useChocolateyCentralManagement
    choco feature enable --name useChocolateyCentralManagementDeployments
}

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. chocolatey.chocolatey
##### You will require the chocolatey.chocolatey collection to be installed
##### on all machines using this playbook.
##### Please see https://github.com/chocolatey/chocolatey-ansible/#installing-the-collection-from-ansible-galaxy

- name: Install and Configure Chocolatey
  hosts: all

## 2. TOP LEVEL VARIABLES ##
  vars:

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
    nuget_repository_url: INTERNAL REPO URL

### b. Internal Repository Credential ###
#### If required, add the repository access credential here and
#### uncomment lines with source_username and source_password below
#    nuget_repository_username: username
#    nuget_repository_password: password

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#    chocolatey_central_management_url: https://chocolatey-central-management:24020/ChocolateyManagementService

#### ii. If using a Client Salt, add it here
#    chocolatey_central_management_client_salt: clientsalt

#### iii. If using a Service Salt, add it here
#    chocolatey_central_management_service_salt: servicesalt

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

  tasks:
  - name: Install chocolatey
    win_chocolatey:
      name: chocolatey
      source: ""{{ nuget_repository_url }}""
      # source_username: ""{{ nuget_repository_username }}""
      # source_password: ""{{ nuget_repository_password }}""

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#   - name: Enable FIPS compliance
#     win_chocolatey_feature:
#       name: useFipsCompliantChecksums
#       state: enabled

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
  - name: Set the cache location
    win_chocolatey_config:
      name: cacheLocation
      state: present
      value: C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
  - name: Set the command execution timeout
    win_chocolatey_config:
      name: commandExecutionTimeoutSeconds
      state: present
      value: 14400

#### Turn off download progress when running choco through integrations
  - name: Disable showing download progress
    win_chocolatey_feature:
      name: showDownloadProgress
      state: disabled

### c. Sources ###
#### Remove the default community package repository source
  - name: Remove Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey
      state: absent

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here
#### NOTE: This EXAMPLE may require changes
  - name: Add Internal Repository
    win_chocolatey_source:
      name: ChocolateyInternal
      state: present
      source: {{ nuget_repository_url }}
      # source_username: {{ nuget_repository_username }}
      # source_password: {{ nuget_repository_password }}
      priority: 1

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
  - name: Upgrade Chocolatey
    win_chocolatey:
      name: chocolatey
      state: latest

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.
### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
  - name: Install Chocolatey License
    win_chocolatey:
      name: chocolatey-license
      source: ChocolateyInternal
      state: latest

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
  - name: Disable Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey.licensed
      state: disabled

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
  - name: Install Chocolatey Extension
    win_chocolatey:
      name: chocolatey.extension
      source: ChocolateyInternal
      state: latest

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
  - name: Hide not-elevated warnings
    win_chocolatey_feature:
      name: showNonElevatedWarnings
      state: disabled

  - name: Use background mode for self-service
    win_chocolatey_feature:
      name: useBackgroundService
      state: enabled

  - name: Use background service for non-admins
    win_chocolatey_feature:
      name: useBackgroundServiceWithNonAdministratorsOnly
      state: enabled

  - name: Allow background uninstallation for user installs
    win_chocolatey_feature:
      name: allowBackgroundServiceUninstallsFromUserInstallsOnly
      state: enabled

  - name: Set allowed background service commands
    win_chocolatey_config:
      name: backgroundServiceAllowedCommands
      state: present
      value: install,upgrade,uninstall

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
  - name: Install Chocolatey Agent
    when: chocolatey_central_management_url is defined
    win_chocolatey:
      name: chocolatey-agent
      source: ChocolateyInternal
      state: latest

  - name: Set the Central Management Service URL
    when: chocolatey_central_management_url is defined
    win_chocolatey_config:
      name: CentralManagementServiceUrl
      state: present
      value: {{ chocolatey_central_management_url }}

  - name: Set the Central Management Client Salt
    when: chocolatey_central_management_client_salt is defined
    win_chocolatey_config:
      name: centralManagementClientCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_client_salt }}

  - name: Set the Central Management Service Salt
    when: chocolatey_central_management_service_salt is defined
    win_chocolatey_config:
      name: centralManagementServiceCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_service_salt }}

  - name: Use Central Management
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagement
      state: enabled

  - name: Use Central Management Deployments
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagementDeployments
      state: enabled

See docs at https://docs.chef.io/resource_chocolatey_package.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### The Chocolatey resources are available with any recent version of Chef.
#### We utilise the Chocolatey recipe to install the Chocolatey binaries.
include_recipe "chocolatey"

## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# NugetRepositoryUsername = "username"
# NugetRepositoryPassword = "password"

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
ChocolateyNupkgUrl = "INTERNAL REPO URL/package/chocolatey.2.2.2.nupkg",

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
node['chocolatey']['install vars'] = {
  'chocolateyDownloadUrl' => "#{ChocolateyNupkgUrl}",
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# chocolatey_feature 'useFipsCompliantChecksums' do
#   action :enable
# end

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolatey_config 'cacheLocation' do
  value 'C:\ProgramData\chocolatey\cache'
end

#### Increase timeout to at least 4 hours
chocolatey_config 'commandExecutionTimeoutSeconds' do
  value '14400'
end

#### Turn off download progress when running choco through integrations
chocolatey_feature 'showDownloadProgress' do
  action :disable
end

### c. Sources ###
#### Remove the default community package repository source
chocolatey_source 'chocolatey' do
  action :remove
end

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
chocolatey_source 'ChocolateyInternal' do
  source "#{NugetRepositoryUrl}"
  priority 1
  action   :add
end

execute 'ChocolateyInternal' do
  command "choco source add --name ChocolateyInternal -s #{NugetRepositoryUrl} -u=#{NugetRepositoryUsername} -p=#{NugetRepositoryPassword} --priority=1"
  only_if { NugetRepositoryUsername != nil || NugetRepositoryPassword != nil }
end

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
chocolatey_package 'chocolatey' do
  action :upgrade
  source "#{NugetRepositoryUrl}"
end

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
chocolatey_package 'chocolatey-license' do
  action :install
  source "#{NugetRepositoryUrl}"
end

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
chocolatey_source 'chocolatey.licensed' do
  action            :disable
end

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
chocolatey_package 'chocolatey.extention' do
  action     install
  source     "#{NugetRepositoryUrl}"
end

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolatey_feature 'showNonElevatedWarnings' do
  action :disable
end

chocolatey_feature 'useBackgroundService' do
  action :enable
end

chocolatey_feature 'useBackgroundServiceWithNonAdministratorsOnly' do
  action :enable
end

chocolatey_feature 'allowBackgroundServiceUninstallsFromUserInstallsOnly' do
  action :enable
end

chocolatey_config 'backgroundServiceAllowedCommands' do
  value 'install,upgrade,uninstall'
end

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
chocolatey_package 'chocolatey-agent' do
  action     install
  source     "#{NugetRepositoryUrl}"
  # user       "#{NugetRepositoryUsername}"
  # password   "#{NugetRepositoryPassword}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'CentralManagementServiceUrl' do
  value  "#{ChocolateyCentralManagementUrl}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'centralManagementClientCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementClientSalt}"
  only_if { ChocolateyCentralManagementClientSalt != nil }
end

chocolatey_config 'centralManagementServiceCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementServiceSalt}"
  only_if { ChocolateyCentralManagementServiceSalt != nil }
end

chocolatey_feature 'useChocolateyCentralManagement' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_feature 'useChocolateyCentralManagementDeployments' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.

If Applicable - Chocolatey Configuration/Installation


#requires -Modules cChoco
## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires chocolatey\cChoco DSC module to be installed on the machine compiling the DSC manifest
#### NOTE: This will need to be installed before running the DSC portion of this script
if (-not (Get-Module cChoco -ListAvailable)) {
    $null = Install-PackageProvider -Name NuGet -MinimumVersion 2.8.5.201 -Force
    if (($PSGallery = Get-PSRepository -Name PSGallery).InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy Trusted
    }
    Install-Module -Name cChoco
    if ($PSGallery.InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy $PSGallery.InstallationPolicy
    }
}

#### ii. Requires a hosted copy of the install.ps1 script
##### This should be available to download without authentication.
##### The original script can be found here: https://community.chocolatey.org/install.ps1

Configuration ChocolateyConfig {
## 2. TOP LEVEL VARIABLES ##
    param(
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
        $NugetRepositoryUrl      = "INTERNAL REPO URL",

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
        $ChocolateyNupkgUrl      = "INTERNAL REPO URL/package/chocolatey.2.2.2.nupkg",

### c. Internal Repository Credential ###
#### If required, add the repository access credential here
#        $NugetRepositoryCredential = [PSCredential]::new(
#            "username",
#            ("password" | ConvertTo-SecureString -AsPlainText -Force)
#        ),

### d. Install.ps1 URL
#### The path to the hosted install script:
        $ChocolateyInstallPs1Url = "https://community.chocolatey.org/install.ps1"

### e. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#        $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService",

#### ii. If using a Client Salt, add it here
#        $ChocolateyCentralManagementClientSalt = "clientsalt",

#### iii. If using a Service Salt, add it here
#        $ChocolateyCentralManagementServiceSalt = "servicesalt"
    )
    Import-DscResource -ModuleName PSDesiredStateConfiguration
    Import-DscResource -ModuleName cChoco

    Node 'localhost' {
## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
        Environment chocoDownloadUrl {
            Name  = "chocolateyDownloadUrl"
            Value = $ChocolateyNupkgUrl
        }

        cChocoInstaller installChocolatey {
            DependsOn = "[Environment]chocoDownloadUrl"
            InstallDir = Join-Path $env:ProgramData "chocolatey"
            ChocoInstallScriptUrl = $ChocolateyInstallPs1Url
        }

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#        cChocoFeature featureFipsCompliance {
#            FeatureName = "useFipsCompliantChecksums"
#        }

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
        cChocoConfig cacheLocation {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "cacheLocation"
            Value      = "C:\ProgramData\chocolatey\cache"
        }

#### Increase timeout to at least 4 hours
        cChocoConfig commandExecutionTimeoutSeconds {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "commandExecutionTimeoutSeconds"
            Value      = 14400
        }

#### Turn off download progress when running choco through integrations
        cChocoFeature showDownloadProgress {
            DependsOn   = "[cChocoInstaller]installChocolatey"
            FeatureName = "showDownloadProgress"
            Ensure      = "Absent"
        }

### c. Sources ###
#### Remove the default community package repository source
        cChocoSource removeCommunityRepository {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name       = "chocolatey"
            Ensure     = "Absent"
        }

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here.
#### NOTE: This EXAMPLE may require changes
        cChocoSource addInternalSource {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name        = "ChocolateyInternal"
            Source      = $NugetRepositoryUrl
            Credentials = $NugetRepositoryCredential
            Priority    = 1
        }

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
        cChocoPackageInstaller updateChocolatey {
            DependsOn   = "[cChocoSource]addInternalSource", "[cChocoSource]removeCommunityRepository"
            Name        = "chocolatey"
            AutoUpgrade = $true
        }

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
        cChocoPackageInstaller chocolateyLicense {
            DependsOn = "[cChocoPackageInstaller]updateChocolatey"
            Name      = "chocolatey-license"
        }

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
        Script disableLicensedSource {
            DependsOn  = "[cChocoPackageInstaller]chocolateyLicense"
            GetScript  = {
                $Source = choco source list --limitoutput | `
                    ConvertFrom-Csv -Delimiter '|' -Header Name, Source, Disabled | `
                    Where-Object Name -eq "chocolatey.licensed"

                return @{
                    Result = if ($Source) {
                        [bool]::Parse($Source.Disabled)
                    } else {
                        Write-Warning "Source 'chocolatey.licensed' was not present."
                        $true  # Source does not need disabling
                    }
                }
            }
            SetScript  = {
                $null = choco source disable --name "chocolatey.licensed"
            }
            TestScript = {
                $State = [ScriptBlock]::Create($GetScript).Invoke()
                return $State.Result
            }
        }

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
        cChocoPackageInstaller chocolateyLicensedExtension {
            DependsOn = "[Script]disableLicensedSource"
            Name      = "chocolatey.extension"
        }

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
        cChocoFeature hideElevatedWarnings {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "showNonElevatedWarnings"
            Ensure      = "Absent"
        }

        cChocoFeature useBackgroundService {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundService"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceWithNonAdmins {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundServiceWithNonAdministratorsOnly"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceUninstallsForUserInstalls {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "allowBackgroundServiceUninstallsFromUserInstallsOnly"
            Ensure      = "Present"
        }

        cChocoConfig allowedBackgroundServiceCommands {
            DependsOn   = "[cChocoFeature]useBackgroundService"
            ConfigName = "backgroundServiceAllowedCommands"
            Value       = "install,upgrade,uninstall"
        }

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
        if ($ChocolateyCentralManagementUrl) {
            cChocoPackageInstaller chocolateyAgent {
                DependsOn = "[cChocoPackageInstaller]chocolateyLicensedExtension"
                Name      = "chocolatey-agent"
            }

            cChocoConfig centralManagementServiceUrl {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                ConfigName = "CentralManagementServiceUrl"
                Value       = $ChocolateyCentralManagementUrl
            }

            if ($ChocolateyCentralManagementClientSalt) {
                cChocoConfig centralManagementClientSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementClientCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementClientSalt
                }
            }

            if ($ChocolateyCentralManagementServiceSalt) {
                cChocoConfig centralManagementServiceSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementServiceCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementServiceSalt
                }
            }

            cChocoFeature useCentralManagement {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagement"
                Ensure      = "Present"
            }

            cChocoFeature useCentralManagementDeployments {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagementDeployments"
                Ensure      = "Present"
            }
        }
    }
}

# If working this into an existing configuration with a good method for
$ConfigData = @{
    AllNodes = @(
        @{
            NodeName                    = "localhost"
            PSDscAllowPlainTextPassword = $true
        }
    )
}

try {
    Push-Location $env:Temp
    $Config = ChocolateyConfig -ConfigurationData $ConfigData
    Start-DscConfiguration -Path $Config.PSParentPath -Wait -Verbose -Force
} finally {
    Pop-Location
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires puppetlabs/chocolatey module
####  See https://forge.puppet.com/puppetlabs/chocolatey


## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$_repository_url = 'INTERNAL REPO URL'

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
$_choco_download_url = 'INTERNAL REPO URL/package/chocolatey.2.2.2.nupkg'

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $_chocolatey_central_management_url = 'https://chocolatey-central-management:24020/ChocolateyManagementService'

#### ii. If using a Client Salt, add it here
# $_chocolatey_central_management_client_salt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $_chocolatey_central_management_service_salt = 'servicesalt'


## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
### Note: `chocolatey_download_url is completely different than normal
###  source locations. This is directly to the bare download url for the
###  chocolatey.nupkg, similar to what you see when you browse to
###  https://community.chocolatey.org/api/v2/package/chocolatey
class {'chocolatey':
  chocolatey_download_url => $_choco_download_url,
  use_7zip                => false,
}


## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations

#chocolateyfeature {'useFipsCompliantChecksums':
#  ensure => enabled,
#}

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolateyconfig {'cacheLocation':
  value => 'C:\ProgramData\chocolatey\cache',
}

#### Increase timeout to at least 4 hours
chocolateyconfig {'commandExecutionTimeoutSeconds':
  value => '14400',
}

#### Turn off download progress when running choco through integrations
chocolateyfeature {'showDownloadProgress':
  ensure => disabled,
}

### c. Sources ###
#### Remove the default community package repository source
chocolateysource {'chocolatey':
  ensure   => absent,
  location => 'https://community.chocolatey.org/api/v2/',
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE requires changes
chocolateysource {'internal_chocolatey':
  ensure             => present,
  location           => $_repository_url,
  priority           => 1,
  username           => 'optional',
  password           => 'optional,not ensured',
  bypass_proxy       => true,
  admin_only         => false,
  allow_self_service => false,
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/

package {'chocolatey':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}


## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/guides/organizations/organizational-deployment-guide#exercise-4-create-a-package-for-the-license

# TODO: Add resource for installing/ensuring the chocolatey-license package
package {'chocolatey-license':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
## Disabled sources still need all other attributes until
## https://tickets.puppetlabs.com/browse/MODULES-4449 is resolved.
## Password is necessary with user, but not ensurable, so it should not
## matter what it is set to here. If you ever do get into trouble here,
## the password is your license GUID.
chocolateysource {'chocolatey.licensed':
  ensure   => disabled,
  priority => '10',
  user     => 'customer',
  password => '1234',
  require  => Package['chocolatey-license'],
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
package {'chocolatey.extension':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
  require  => Package['chocolatey-license'],
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolateyfeature {'showNonElevatedWarnings':
  ensure => disabled,
}

chocolateyfeature {'useBackgroundService':
  ensure => enabled,
}

chocolateyfeature {'useBackgroundServiceWithNonAdministratorsOnly':
  ensure => enabled,
}

chocolateyfeature {'allowBackgroundServiceUninstallsFromUserInstallsOnly':
  ensure => enabled,
}

chocolateyconfig {'backgroundServiceAllowedCommands':
  value => 'install,upgrade,uninstall',
}

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if $_chocolatey_central_management_url {
  package {'chocolatey-agent':
    ensure   => latest,
    provider => chocolatey,
    source   => $_repository_url,
    require  => Package['chocolatey-license'],
  }

  chocolateyconfig {'CentralManagementServiceUrl':
    value   => $_chocolatey_central_management_url,
  }

  if $_chocolatey_central_management_client_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  if $_chocolatey_central_management_service_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  chocolateyfeature {'useChocolateyCentralManagement':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }

  chocolateyfeature {'useChocolateyCentralManagementDeployments':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }
}

Need Help? View our docs or file an issue.

There is already a version of this package in your Script Builder

Current Version	New Version

Downloads:

161,323

Downloads of v 1.7.2:

1,937

Last Update:

21 May 2021

Package Maintainer(s):

flcdrg

Software Author(s):

Mitchell Hashimoto
HashiCorp

Tags:

vault hashicorp

Vault

This is not the latest version of Vault available.

1.7.2 | Updated: 21 May 2021

Downloads:

161,323

Downloads of v 1.7.2:

1,937

Maintainer(s):

flcdrg

Software Author(s):

Mitchell Hashimoto
HashiCorp

Tags:

vault hashicorp

Vault 1.7.2

This is not the latest version of Vault available.

All Checks are Passing

3 Passing Tests

Show Checks

Validation Testing Passed

Verification Testing Passed

Details

Scan Testing Successful:

No detections found in any package files

Details

Learn More

Deployment Method: Individual Install, Upgrade, & Uninstall

To install Vault, run the following command from the command line or from PowerShell:

To upgrade Vault, run the following command from the command line or from PowerShell:

To uninstall Vault, run the following command from the command line or from PowerShell:

NOTE

This applies to both open source and commercial editions of Chocolatey.

1. Enter Your Internal Repository Url

(this should look similar to https://community.chocolatey.org/api/v2/)

2. Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the package and push it to a repository Download

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the package:
  Download
- Follow manual internalization instructions

Package Internalizer (C4B)

Run: (additional options)

choco download vault --internalize --version=1.7.2 --source=https://community.chocolatey.org/api/v2/

For package and dependencies run:

choco push --source="'INTERNAL REPO URL'"

Automate package internalization

3. Copy Your Script

choco upgrade vault -y --source="'INTERNAL REPO URL'" --version="'1.7.2'" [other options]

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:


choco upgrade vault -y --source="'INTERNAL REPO URL'" --version="'1.7.2'" 
$exitCode = $LASTEXITCODE

Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
  Exit 0
}

Exit $exitCode


- name: Install vault
  win_chocolatey:
    name: vault
    version: '1.7.2'
    source: INTERNAL REPO URL
    state: present

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.


chocolatey_package 'vault' do
  action    :install
  source   'INTERNAL REPO URL'
  version  '1.7.2'
end

See docs at https://docs.chef.io/resource_chocolatey_package.html.


cChocoPackageInstaller vault
{
    Name     = "vault"
    Version  = "1.7.2"
    Source   = "INTERNAL REPO URL"
}

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.


package { 'vault':
  ensure   => '1.7.2',
  provider => 'chocolatey',
  source   => 'INTERNAL REPO URL',
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

4. If applicable - Chocolatey configuration/installation

See infrastructure management matrix for Chocolatey configuration elements and examples.

NOTE

Private CDN cached downloads available for licensed customers. Never experience 404 breakages again! Learn more...

Package Approved

This package was approved as a trusted package on 21 May 2021.

Description

Vault is a tool for securely accessing secrets. A secret is anything that you want to tightly control access to, such as API keys, passwords, certificates, and more. Vault provides a unified interface to any secret, while providing tight access control and recording a detailed audit log.

A modern system requires access to a multitude of secrets: database credentials, API keys for external services, credentials for service-oriented architecture communication, etc. Understanding who is accessing what secrets is already very difficult and platform-specific. Adding on key rolling, secure storage, and detailed audit logs is almost impossible without a custom solution. This is where Vault steps in.

The key features of Vault are:

* Secure Secret Storage: Arbitrary key/value secrets can be stored in Vault. Vault encrypts these secrets prior to writing them to persistent storage, so gaining access to the raw storage isn't enough to access your secrets. Vault can write to disk, Consul, and more.
* Dynamic Secrets: Vault can generate secrets on-demand for some systems, such as AWS or SQL databases. For example, when an application needs to access an S3 bucket, it asks Vault for credentials, and Vault will generate an AWS keypair with valid permissions on demand. After creating these dynamic secrets, Vault will also automatically revoke them after the lease is up.
* Data Encryption: Vault can encrypt and decrypt data without storing it. This allows security teams to define encryption parameters and developers to store encrypted data in a location such as SQL without having to design their own encryption methods.
* Leasing and Renewal: All secrets in Vault have a lease associated with it. At the end of the lease, Vault will automatically revoke that secret. Clients are able to renew leases via built-in renew APIs.
* Revocation: Vault has built-in support for secret revocation. Vault can revoke not only single secrets, but a tree of secrets, for example all secrets read by a specific user, or all secrets of a particular type. Revocation assists in key rolling as well as locking down systems in the case of an intrusion.

For more information, see the introduction section of the Vault website.

Files

tools\chocolateyInstall.ps1

$packageArgs = @{
  PackageName         = "vault"
  Url                 = "https://releases.hashicorp.com/vault/$($version)/vault_$($version)_windows_386.zip"
  UnzipLocation       = "$(Split-Path -parent $MyInvocation.MyCommand.Definition)"
  Url64               = "https://releases.hashicorp.com/vault/$($version)/vault_$($version)_windows_amd64.zip"
  Checksum            = '32abb0d7b494a71d604bd15770d0ad1827fcf775d0602619a184af7b40fade67'
  ChecksumType        = 'sha256'
  Checksum64          = '56aa2d2ccae1009a1bb60ffd397acea1815a80799e8adf0936489a5b6973a8a6'
  version             = '1.7.2'  
}

Install-ChocolateyZipPackage @packageArgs

Virus Scan Results

vault.1.7.2.nupkg (8647243f56fe) - ## / 62
vault_1.7.2_windows_amd64.zip (56aa2d2ccae1) - ## / 59
vault_1.7.2_windows_386.zip (32abb0d7b494) - ## / 59

In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).

Chocolatey Pro provides runtime protection from possible malware.

Version History

Version	Downloads	Last Updated	Status
Vault 1.15.0	608	Wednesday, September 27, 2023	Approved
Vault 1.14.3	1969	Thursday, September 14, 2023	Approved
Vault 1.14.2	1954	Wednesday, August 30, 2023	Approved
Vault 1.14.1	4124	Wednesday, July 26, 2023	Approved
Vault 1.14.0	4660	Wednesday, June 21, 2023	Approved
Vault 1.13.3	1564	Friday, June 9, 2023	Approved
Vault 1.13.2	7462	Thursday, April 27, 2023	Approved
Vault 1.13.1	4218	Thursday, March 30, 2023	Approved
Vault 1.13.0	1512	Tuesday, March 7, 2023	Approved
Vault 1.12.3	2109	Thursday, February 23, 2023	Approved
Vault 1.12.2	5871	Saturday, December 17, 2022	Approved
Vault 1.11.1	18715	Wednesday, July 27, 2022	Approved
Vault 1.11.0	2526	Tuesday, June 21, 2022	Approved
Vault 1.10.4	467	Friday, June 17, 2022	Approved
Vault 1.10.3	3144	Friday, May 13, 2022	Approved
Vault 1.10.2	45	Friday, May 13, 2022	Approved
Vault 1.10.1	1511	Monday, April 25, 2022	Approved
Vault 1.10.0	2288	Friday, March 25, 2022	Approved
Vault 1.9.4	1347	Wednesday, March 9, 2022	Approved
Vault 1.9.3	2293	Monday, January 31, 2022	Approved
Vault 1.9.2	1932	Wednesday, December 22, 2021	Approved
Vault 1.9.1	1080	Tuesday, December 14, 2021	Approved
Vault 1.9.0	1575	Tuesday, November 23, 2021	Approved
Vault 1.8.5	74	Tuesday, November 23, 2021	Approved
Vault 1.8.4	3065	Friday, October 8, 2021	Approved
Vault 1.8.3	668	Friday, October 1, 2021	Approved
Vault 1.8.2	612	Thursday, September 30, 2021	Approved
Vault 1.8.1	142	Thursday, September 30, 2021	Approved
Vault 1.8.0	3303	Thursday, July 29, 2021	Approved
Vault 1.7.3	2483	Thursday, June 17, 2021	Approved
Vault 1.7.2	1937	Friday, May 21, 2021	Approved
Vault 1.7.1	1530	Monday, April 26, 2021	Approved
Vault 1.7.0	1559	Tuesday, April 6, 2021	Approved
Vault 1.6.3	440	Thursday, March 25, 2021	Approved
Vault 1.6.2	3991	Monday, February 1, 2021	Approved
Vault 1.6.1	706	Thursday, January 21, 2021	Approved
Vault 1.5.5	5308	Friday, October 23, 2020	Approved
Vault 1.5.4	21842	Thursday, October 22, 2020	Approved
Vault 1.5.3	576	Thursday, October 22, 2020	Approved
Vault 1.5.2	2301	Wednesday, August 26, 2020	Approved
Vault 1.5.0	1646	Wednesday, July 22, 2020	Approved
Vault 1.4.3	875	Friday, July 3, 2020	Approved
Vault 1.4.1	1729	Monday, May 4, 2020	Approved
Vault 1.4.0	1371	Thursday, April 9, 2020	Approved
Vault 1.3.4	208	Wednesday, April 8, 2020	Approved
Vault 1.3.3	901	Monday, March 9, 2020	Approved
Vault 1.3.2	1469	Friday, January 24, 2020	Approved
Vault 1.3.1	1617	Friday, December 20, 2019	Approved
Vault 1.3.0	484	Wednesday, December 11, 2019	Approved
Vault 1.2.4	1014	Tuesday, November 12, 2019	Approved
Vault 1.2.3	3401	Monday, September 16, 2019	Approved
Vault 1.2.2	2344	Friday, August 16, 2019	Approved
Vault 1.2.1	155	Thursday, August 8, 2019	Approved
Vault 1.2.0	935	Wednesday, July 31, 2019	Approved
Vault 1.1.1	5052	Tuesday, April 16, 2019	Approved
Vault 1.1.0	1007	Tuesday, March 19, 2019	Approved
Vault 1.0.3	681	Friday, March 1, 2019	Approved
Vault 0.10.0	3096	Monday, April 16, 2018	Approved
Vault 0.10.0-rc1	289	Saturday, April 7, 2018	Approved
Vault 0.9.6	462	Saturday, April 7, 2018	Approved
Vault 0.9.5	261	Saturday, April 7, 2018	Approved
Vault 0.9.4	334	Saturday, April 7, 2018	Approved
Vault 0.9.3	281	Saturday, April 7, 2018	Approved
Vault 0.9.2	278	Saturday, April 7, 2018	Approved
Vault 0.9.1	987	Saturday, January 13, 2018	Approved
Vault 0.9.0	343	Saturday, January 13, 2018	Approved
Vault 0.8.3	931	Wednesday, September 20, 2017	Approved
Vault 0.8.2	353	Wednesday, September 20, 2017	Approved
Vault 0.8.1	430	Thursday, August 24, 2017	Approved
Vault 0.8.0	417	Thursday, August 24, 2017	Approved
Vault 0.7.3	554	Thursday, June 8, 2017	Approved
Vault 0.7.2	403	Wednesday, June 7, 2017	Approved
Vault 0.7.1	370	Wednesday, June 7, 2017	Approved
Vault 0.7.0	391	Wednesday, June 7, 2017	Approved
Vault 0.6.5	897	Wednesday, February 8, 2017	Approved
Vault 0.6.4	511	Thursday, December 22, 2016	Approved
Vault 0.6.3	391	Wednesday, December 14, 2016	Approved
Vault 0.6.2	468	Tuesday, October 25, 2016	Approved
Vault 0.6.1	460	Tuesday, August 30, 2016	Approved

HashiCorp 2015-2021

Release Notes

1.7.2

### May 20th, 2021

SECURITY:

* Non-Expiring Leases: Vault and Vault Enterprise renewed nearly-expiring token
leases and dynamic secret leases with a zero-second TTL, causing them to be
treated as non-expiring, and never revoked. This issue affects Vault and Vault
Enterprise versions 0.10.0 through 1.7.1, and is fixed in 1.5.9, 1.6.5, and
1.7.2 (CVE-2021-32923).

CHANGES:

* agent: Update to use IAM Service Account Credentials endpoint for signing JWTs
when using GCP Auto-Auth method GH-11473
* auth/gcp: Update to v0.9.1 to use IAM Service Account Credentials API for
signing JWTs GH-11494

IMPROVEMENTS:

* api, agent: LifetimeWatcher now does more retries when renewal failures occur. This also impacts Agent auto-auth and leases managed via Agent caching. GH-11445
* auth/aws: Underlying error included in validation failure message. GH-11638
* http: Add optional HTTP response headers for hostname and raft node ID GH-11289
* secrets/aws: add ability to provide a role session name when generating STS credentials GH-11345
* secrets/database/mongodb: Add ability to customize SocketTimeout, ConnectTimeout, and ServerSelectionTimeout GH-11600
* secrets/database/mongodb: Increased throughput by allowing for multiple request threads to simultaneously update users in MongoDB GH-11600

BUG FIXES:

* agent/cert: Fix issue where the API client on agent was not honoring certificate
information from the auto-auth config map on renewals or retries. GH-11576
* agent: Fixed agent templating to use configured tls servername values GH-11288
* core (enterprise): Fix plugins mounted in namespaces being unable to use password policies GH-11596
* core: correct logic for renewal of leases nearing their expiration time. GH-11650
* identity: Use correct mount accessor when refreshing external group memberships. GH-11506
* replication: Fix panic trying to update walState during identity group invalidation. GH-1865
* secrets/database: Fix marshalling to allow providing numeric arguments to external database plugins. GH-11451
* secrets/database: Fixed minor race condition when rotate-root is called GH-11600
* secrets/database: Fixes issue for V4 database interface where SetCredentials wasn't falling back to using RotateRootCredentials if SetCredentials is Unimplemented GH-11585
* secrets/keymgmt (enterprise): Fixes audit logging for the read key response.
* storage/raft: Support cluster address change for nodes in a cluster managed by autopilot GH-11247
* ui: Fix entity group membership and metadata not showing GH-11641
* ui: Fix text link URL on database roles list GH-11597

## Previous Releases
For more information on previous releases, check out the changelog on GitHub.

Dependencies

This package has no dependencies.

Discussion for the Vault Package

Ground Rules:

This discussion is only about Vault and the Vault package. If you have feedback for Chocolatey, please contact the Google Group.
This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
Tell us what you love about the package or Vault, or tell us what needs improvement.
Share your experiences with the package, or extra configuration or gotchas that you've found.
If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.

Resources

Events

Courses

161,323

1,937

21 May 2021

Vault

Vault 1.7.2

All Checks are Passing

Deployment Method: Individual Install, Upgrade, & Uninstall

Deployment Method:

1. Enter Your Internal Repository Url

2. Setup Your Environment

1. Ensure you are set for organizational deployment

2. Get the package into your environment

3. Copy Your Script

4. If applicable - Chocolatey configuration/installation

1.7.2

Ground Rules: