Downloads:

354,230

Downloads of v 10.0:

35

Last Update:

10 Jun 2021

Published Date:

10 Jun 2021

Reviewed Date:

28 Jun 2021

Reviewer:

gravatar

Package Maintainer(s):

Software Author(s):

  • Christian Ghisler

Tags:

file manager shareware nagscreen trial admin

Total Commander

(Waiting for Maintainer to take corrective action)

  • 1
  • 2
  • 3

10.0 | Updated: 10 Jun 2021

Downloads:

354,230

Downloads of v 10.0:

35

Published:

10 Jun 2021

Reviewed:

28 Jun 2021

Reviewer:

gravatar

Software Author(s):

  • Christian Ghisler

  • 1
  • 2
  • 3
Total Commander 10.0

(Waiting for Maintainer to take corrective action)
  • 1
  • 2
  • 3

Some Checks Have Failed or Are Not Yet Complete

Not All Tests Have Passed


Validation Testing Passed


Verification Testing Failed

Details

Scan Testing Pending

This version is in moderation and has not yet been approved. This means it doesn't show up under normal search.

  • Until approved, you should consider this package version unsafe - it could do very bad things to your system (it probably doesn't but you have been warned, that's why we have moderation).
  • This package version can change wildly over the course of moderation until it is approved. If you install it and it later has changes to this version, you will be out of sync with any changes that have been made to the package. Until approved, you should consider that this package version doesn't even exist.
  • You cannot install this package under normal scenarios. See How to install package version under moderation for more information.
  • There are also no guarantees that it will be approved.

There are versions of this package awaiting moderation (possibly just this one). See the Version History section below.

chocolatey-community (maintainer) on 10 Jun 2021 18:12:20 +00:00:

User 'chocolatey-community' (maintainer) submitted package.

chocolatey-ops (reviewer) on 10 Jun 2021 18:46:01 +00:00:

TotalCommander has passed automated validation. It may have or may still fail other checks like testing (verification).
NOTE: No required changes that the validator checks have been flagged! It is appreciated if you fix other items, but only Requirements will hold up a package version from approval. A human review could still turn up issues a computer may not easily find.

Guidelines

Guidelines are strong suggestions that improve the quality of a package version. These are considered something to fix for next time to increase the quality of the package. Over time Guidelines can become Requirements. A package version can be approved without addressing Guideline comments but will reduce the quality of the package.

  • In the Description element of the nuspec file a potentially invalid Url has been found. Recommendation is to fix this URL More...
Notes

Notes typically flag things for both you and the reviewer to go over. Sometimes this is the use of things that may or may not be necessary given the constraints of what you are trying to do and/or are harder for automation to flag for other reasons. Items found in Notes might be Requirements depending on the context. A package version can be approved without addressing Note comments.

  • Binary files (.exe, .msi, .zip) have been included. The reviewer will ensure the maintainers have distribution rights. More...

chocolatey-ops (reviewer) on 10 Jun 2021 19:05:18 +00:00:

TotalCommander has failed automated package testing (verification).
Please visit https://gist.github.com/25389e23ffd32ebbb7f1f1d20cb3a563 for details.
The package status will be changed and will be waiting on your next actions.

  • NEW! We have a test environment for you to replicate the testing we do. This can be used at any time to test packages! See https://github.com/chocolatey-community/chocolatey-test-environment
  • Please log in and leave a review comment if you have questions and/or comments.
  • If you see the verifier needs to rerun testing against the package without resubmitting (a issue in the test results), you can do that on the package page in the review section.
  • If the verifier is incompatible with the package, please log in and leave a review comment if the package needs to bypass testing (e.g. package installs specific drivers).
  • Automated testing can also fail when a package is not completely silent or has pop ups (AutoHotKey can assist - a great example is the VeraCrypt package).
  • A package that cannot be made completely unattended should have the notSilent tag. Note that this must be approved by moderators.

Pauby (reviewer) on 28 Jun 2021 10:02:04 +00:00:

Error looks package related but rerunning Verification to make sure.
Verification Status Change - Verification tests have been set to rerun.

chocolatey-ops (reviewer) on 28 Jun 2021 10:04:31 +00:00:

TotalCommander has failed automated package testing (verification).
Please visit https://gist.github.com/0fce3f8f2b217175ed63c94611b16cfa for details.
The package status will be changed and will be waiting on your next actions.

  • NEW! We have a test environment for you to replicate the testing we do. This can be used at any time to test packages! See https://github.com/chocolatey-community/chocolatey-test-environment
  • Please log in and leave a review comment if you have questions and/or comments.
  • If you see the verifier needs to rerun testing against the package without resubmitting (a issue in the test results), you can do that on the package page in the review section.
  • If the verifier is incompatible with the package, please log in and leave a review comment if the package needs to bypass testing (e.g. package installs specific drivers).
  • Automated testing can also fail when a package is not completely silent or has pop ups (AutoHotKey can assist - a great example is the VeraCrypt package).
  • A package that cannot be made completely unattended should have the notSilent tag. Note that this must be approved by moderators.

chocolatey-ops (reviewer) on 18 Jul 2021 10:06:04 +00:00:

We've found TotalCommander v10.0 in a submitted status and waiting for your next actions. It has had no updates for 20 or more days since a reviewer has asked for corrections. Please note that if there is no response or fix of the package within 15 days of this message, this package version will automatically be closed (rejected) due to being stale.

Take action:

  • Log in to the site and respond to the review comments.
  • Resubmit fixes for this version.
  • If the package version is failing automated checks, you can self-reject the package.

If your package is failing automated testing, you can use the chocolatey test environment to manually run the verification and determine what may need to be fixed.

Note: We don't like to see packages automatically rejected. It doesn't mean that we don't value your contributions, just that we can not continue to hold packages versions in a waiting status that have possibly been abandoned. If you don't believe you will be able to fix up this version of the package within 15 days, we strongly urge you to log in to the site and respond to the review comments until you are able to.

Description

Total Commander is a file manager for Windows, a tool like the Explorer or file manager, which comes with windows.
But Total Commander uses a different approach: it has two fixed windows, which makes copying files much easier.

Features

  • Two file windows side by side
  • Multiple language and Unicode support
  • Enhanced search function
  • Compare files (now with editor) / synchronize directories
  • Quick View panel with bitmap display
  • ZIP, 7ZIP, ARJ, LZH, RAR, UC2, TAR, GZ, CAB, ACE archive handling + plugins
  • Built-in FTP client with FXP (server to server) and HTTP proxy support
  • Parallel port link, multi-rename tool
  • Tabbed interface, regular expressions, history+favorites buttons
  • Thumbnails view, custom columns, enhanced search
  • Compare editor, cursor in lister, separate trees, logging, enhanced overwrite dialog etc.
  • Unicode names almost everywhere, long names (>259 characters), password manager for ftp and plugins, synchronize empty dirs, 64 bit context menu, quick file filter (Ctrl+S)
  • USB port connection via special direct transfer cable, partial branch view (Ctrl+Shift+B), and many improvements to ftp, synchronizing and other functions
  • And many more!

FAQ
Plugins
Plugin downloads
Plugin development

Package parameters

The following package parameters can be set:

  • /LocalUser - Install only for local user. By default it will be installed for all users.
  • /DesktopIcon - Add an icon for Total Commander to the Desktop. By default no icon is added.
  • /InstallPath - Use custom install path. By default Total Commander is installed to the %ProgramFiles%\totalcmd directory.
  • /DefaultFM - Use TC as default file manager instead of Explorer. Use /DefaultFM:explorer to return to Explorer.
  • /ShellExtension - Add Total Commander in shell context menu for directories.

These parameters can be passed to the installer with the use of --params. For example: --params '/LocalUser /DesktopIcon'.

Notes

  • This package sets system environment variable COMMANDER_PATH which points to the Total Commander install directory.
  • This package contain combined Total Commander installer which contains both x32 and x64 bit versions.
  • Total Commander is a Shareware program. This means that you can test it for a period of 30 days. After testing the program, you must either order the full version, or delete the program from your harddisk.

legal\LICENSE.txt
Software Licence / Copyright
 
Software Licence
 
Please read the following lines carefully before using this software. If you disagree with any of the following, you are not allowed to use this program. You MUST then delete it immediately.
 
Shareware-version
 
You have the right to test this program for a period of one month. You are allowed to copy this Shareware-version (and ONLY the Shareware version) and give it to any other person, as long as it is not modified in any way. Under modifications is understood the changing, adding or removing of any files of this package without the author's written permission. You are NOT allowed to pack this program together with a commercial program or a book. Shareware dealers are allowed to sell the Shareware version for a small fee (around CHF/US$ 10.-). It must be clear to the buyer that he isn't receiving the full version! You are encouraged to put this program on as many BBS systems as possible. The distribution on CD-ROM is also permitted, as long as the original files are not changed in any way. Please contact me if you want to distribute the program with a different installation program, changed files etc. Programs marked as "Beta" or "Release candidate" may not be distributed under any conditions.
 
Use of this software after the trial period of one month is in violation of international Copyright law! It is also unfair to the author, who has spent hundreds of hours developing this program.
 
Registration
 
This program is neither freeware nor public domain. Use after the 30 day trial period requires registration. The registration fee is only CHF 40.- incl. S&H ($ 38.- US personal cheque or cash including handling fees) for a personal licence, or CHF 30.- for a student licence (with photocopy of student identity card). The student licence can only be registered to the full name of the student. See How to register for details on registration and support.
 
Registered version (personal licence)
 
The registered version may be installed on as many computers as desired, as long as it is used by only one person at any one time (I.e. one installation at home and one at the office used by the same person). Therefore you need only one licence for a port connection between two computers. The usage by multiple people at the same time (on multiple computers) requires additional licences.
 
Additional licences (multi-user licences)
 
Additional licences allow an institution, company or school to install the program on multiple computers and/or servers. Each licence allows one person at the same time to use the program on an unlimited number of computers. For example, if 10 people run Total Commander at the same time on 20 computers (desktop/notebook), a 10 user licence would be needed. All licences are issued to the same (company) name, which appears in the program's title bar. Additional licences cost CHF 20.- for the 2nd to 10th licence, etc. (see additional licences for details). For larger amounts than 1000 please contact the author. Each additional licence also allows a single user to use the program at home.
 
Liability
 
We try to keep our software as bug-free as possible. But it's a general rule (Murphy's), that no software ever is error free, and the number of errors increases with the complexity of the program. That's why we cannot guarantee that this software will run in every environment, on any Windows compatible machine, together with any other application, without producing errors. Any liability for damage of any sort is hereby denied. In any case, the liability is limited to the registration fee.
 
Please test this program with non-critical data. We cannot guarantee the safety of your data. Especially new operating systems released after a specific version of Total Commander can cause trouble, so make sure to upgrade often. Should you detect errors before registration, you accept them if you register. Any description of bugs will be accepted, but we cannot guarantee that we will be able to correct them (but we will try our best).
 
Development of Total Commander
 
Total Commander was written utilizing Borland Delphi 1.0 (16 bit) and 2.0 (32 bit) (© 1993-96 by Borland International), and Lazarus/Free Pascal (64 bit). The Drag&Drop-algorithms, especially the undocumented parts, were found in the very good book "Undocumented Windows", Andrew Schulman, Addison Wesley 1991. The DPMI-handling for setting the volume label was taken from the book "Turbo Pascal für Windows - Object Windows", A. Ertl/R. Machholz, Sybex 1992. Only the algorithms were taken and rewritten in Pascal. The idea for the screen layout was taken from DCC, a Norton Commander (© Symantec) clone. All code from the German issue WinDOS was removed and rewritten for Copyright reasons. The ARJ and LHA code was translated by Mart Heubels (WinCAT PRO) and myself from public C sources to Pascal. A free unpacking DLL is available upon request. The internal ZIP packer is based on Zlib by Jean-loup Gailly. The C sources are available on the Internet, on the same server as ZIP-NT. MD5 Implementation provided by Greg Carter, CRYPTOCard Corporation. The AES encryption code used in the ZIP packer was developed by Dr Brian Gladman. The LZMA SDK (ZIP method 14) is written and placed in the public domain by Igor Pavlov. The AES256 and AES512-hash functions are Copyright 2002-2007 Wolfgang Ehrhardt. Optimized MD5, SHA1 and SHA256 parts from DCPcrypt Cryptographic Component Library v2, Copyright (c) 1999-2003 David Barton.
 
All mentioned Trademarks and Copyrights belong to their respective owners.
 
Legal domicile is Bern, Switzerland.
 
Christian Ghisler, Ghisler Software GmbH, PO Box, CH-3065 Bolligen, Switzerland, 2015
legal\VERIFICATION.txt
VERIFICATION

Verification is intended to assist the Chocolatey moderators and community
in verifying that this package's contents are trustworthy.

The installer have been downloaded from TotalCommander website and can be verified like this:

1. Download the following installers:
  setup: <https://totalcommander.ch/win/tcmd1000x32_64.exe>
  installer: <http://ghisler.fileburst.com/addons/installer.zip>

2. You can use one of the following methods to obtain the checksum
  - Use powershell function 'Get-Filehash'
  - Use chocolatey utility 'checksum.exe'

  checksum type: sha256
  checksum-setup: 1B65031E4D19073E997B6AF5C6369BC06A52FF40A561C75DC2C6D22738327A3E
  checksum-installer: 80DE9C2C49FC63965CF0E9BCB1A0E6D25187A1613BDE2086BDA79EFBDC8FCEB8

File 'LICENSE.txt' is obtained from help file of the application.
tools\chocolateyInstall.ps1
$ErrorActionPreference = 'Stop'

$toolsPath = Split-Path $MyInvocation.MyCommand.Definition
. $toolsPath\helpers.ps1

$is64 = (Get-OSArchitectureWidth 64) -and $env:chocolateyForceX86 -ne 'true'

$tcExeName = if ($is64) { 'totalcmd64.exe' } else { 'totalcmd.exe' }
$pp = Get-PackageParameters

$tcmdWork = Get-PackageCacheLocation
Extract-TCFiles
Set-TCParameters

$packageArgs = @{
    PackageName    = 'totalcommander'
    FileType       = 'exe'
    File           = "$tcmdWork\INSTALL.exe"
    File64         = "$tcmdWork\INSTALL.exe"
    SilentArgs     = ''
    ValidExitCodes = @(0)
    SoftwareName   = 'Total Commander*'
}
Install-ChocolateyInstallPackage @packageArgs
Remove-Item $toolsPath\*.exe, $toolsPath\*.zip -ea 0

$packageName = $packageArgs.packageName
$installLocation = Get-TCInstallLocation
if (!$installLocation)  { Write-Warning "Can't find $packageName install location"; return }
Write-Host "$packageName installed to '$installLocation'"

Write-Host 'Setting system environment COMMANDER_PATH'
Set-EnvironmentVariable 'COMMANDER_PATH' $installLocation Machine

if ($pp.ShellExtension)              { Set-TCShellExtension }
if ($pp.DefaultFM -eq $true)         { Set-TCAsDefaultFM }
if ($pp.DefaultFM -like 'explorer*') { Set-ExplorerAsDefaultFM }

Register-Application "$installLocation\$tcExeName" tc
Write-Host "$packageName registered as tc"
tools\chocolateyUninstall.ahk
; default environment
DetectHiddenWindows, off
SetControlDelay, 20

; modified environment
#NoEnv
#NoTrayIcon
DetectHiddenText, off
SetTitleMatchMode, 2  ;contains

; variables
winTitle1 = Uninstall /Repair Total Commander ahk_class #32770
winTitle2 = Uninstall Total Commander ahk_class #32770
winTitle3 = Uninstall ahk_class #32770

WinWait, %winTitle1%, Removes the program, 20
ControlClick, Button1 ; &Uninstall

WinWait, %winTitle2%, Uninstall Program, 20
ControlClick, Button4 ; Remove configuration files
ControlClick, Button5 ; Uninstall

WinWait, %winTitle3%, Warning: This will, 20
ControlClick, Button1 ; Yes

WinWait, %winTitle3%, The following, 20
ControlClick, Button1 ; OK

WinWait, %winTitle3%, Program removed, 20
ControlClick, Button1 ; OK

ExitApp
tools\chocolateyUninstall.ps1
$packageName = 'totalcommander'
$packageSearch = "Total Commander*"
$installerType = 'exe'
$silentArgs = ''
$validExitCodes = @(0)

$scriptPath = "$(Split-Path -parent $MyInvocation.MyCommand.Definition)"
$ahkFile = Join-Path $scriptPath "chocolateyUninstall.ahk"
$ahkExe = 'AutoHotKey'
$ahkRun = "$Env:Temp\$(Get-Random).ahk"
Copy-Item $ahkFile "$ahkRun" -Force

Start-Process $ahkExe $ahkRun
Get-ItemProperty -Path @('HKLM:\Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\*',
                         'HKLM:\Software\Microsoft\Windows\CurrentVersion\Uninstall\*',
                         'HKCU:\Software\Microsoft\Windows\CurrentVersion\Uninstall\*') `
                 -ErrorAction:SilentlyContinue `
| Where-Object   {$_.DisplayName -like $packageSearch} `
| ForEach-Object {Uninstall-ChocolateyPackage -PackageName "$packageName" `
                                              -FileType "$installerType" `
                                              -SilentArgs "$($silentArgs)" `
                                              -File "$($_.UninstallString.Replace('"',''))" `
                                              -ValidExitCodes $validExitCodes}
Remove-Item "$ahkRun" -Force
tools\helpers.ps1
function Set-TCParameters() {
    $localUser   = 'UserName='  + $(if ($pp.LocalUser)   { '' }  else { '*' })
    $desktopIcon = 'mkdesktop=' + $(if ($pp.DesktopIcon) { '1' } else { '0' })
    $installPath = 'Dir='       + $(if ($pp.InstallPath) { $pp.InstallPath } else { '%ProgramFiles%\totalcmd' })

    $installInf = Join-Path $tcmdWork "INSTALL.INF"
    (Get-Content $installInf)   -Replace 'UserName=',        $localUser `
                                -Replace 'auto=0',           'auto=1' `
                                -Replace 'hidden=0',         'hidden=1' `
                                -Replace 'mkdesktop=1',      $desktopIcon `
                                -Replace 'Dir=c:\\totalcmd', $installPath | Set-Content $installInf
}

function Extract-TCFiles() {
    Write-Verbose "Extract EXE to change install options"
    $parameters = @{
      packageName = "$($env:chocolateyInstall) setup"
      fileFullPath = Get-Item $toolsPath\*.exe
      destination = $tcmdWork
    }
    Get-ChocolateyUnzip @parameters

    Write-Verbose "Extract installer"
    $parameters["packageName"] = "$($env:chocolateyPackageName) installer"
    $parameters["fileFullPath"] = Get-Item $toolsPath\*.zip
    Get-ChocolateyUnzip @parameters

    if ($is64) {
        Move-Item $tcmdWork\INSTALL64.exe  $tcmdWork\INSTALL.exe -Force
        Move-Item $tcmdWork\INSTALL64.inf  $tcmdWork\INSTALL.inf -Force
    }
}

function Set-TCShellExtension() {
    Write-Host "Setting shell extension"

    New-PSDrive -Name HKCR -PSProvider Registry -Root HKEY_CLASSES_ROOT -ea 0 | Out-Null
    #sp HKCR:\Directory\shell -name "(Default)" -Value "Total_Commander"
    mkdir HKCR:\Directory\shell\Total_Commander\command -force | Out-Null
    Set-ItemProperty HKCR:\Directory\shell\Total_Commander -name "(Default)" -Value "Total Commander"
    Set-ItemProperty HKCR:\Directory\shell\Total_Commander\command  -name "(Default)" -Value "$installLocation\$tcExeName /O ""%1"""
}

function Set-ExplorerAsDefaultFM() {
    Write-Host "Setting Explorer as default file manager"

    New-PSDrive -Name HKCR -PSProvider Registry -Root HKEY_CLASSES_ROOT -ea 0 | Out-Null
    'HKCR:\Directory', 'HKCR:\Drive' | ForEach-Object {
        $key = Get-Item $_
        $key = $key.OpenSubKey('shell', 'ReadWriteSubTree')
        $key.DeleteValue('')
    }
}

function Set-TCAsDefaultFM() {
    Write-Host "Setting Total Commander as default file manager"

    New-PSDrive -Name HKCR -PSProvider Registry -Root HKEY_CLASSES_ROOT -ea 0 | Out-Null

    Set-ItemProperty HKCR:\Drive\shell -name "(Default)" -Value "open"
    mkdir HKCR:\Drive\shell\open\command -force | Out-Null
    Set-ItemProperty HKCR:\Drive\shell\open\command  -name "(Default)" -Value "$installLocation\$tcExeName /O ""%1"""

    Set-ItemProperty HKCR:\Directory\shell -name "(Default)" -Value "open"
    mkdir HKCR:\Directory\shell\open\command -force | Out-Null
    Set-ItemProperty HKCR:\Directory\shell\open\command  -name "(Default)" -Value "$installLocation\$tcExeName /O ""%1"""
}

function Get-TCInstallLocation() {
    if ($Env:COMMANDER_PATH) { return $Env:COMMANDER_PATH }

    $key = Get-ItemProperty 'HKLM:\SOFTWARE\Ghisler\Total Commander' -ea 0
    if ($key) { return $key.InstallDir }

    $installLocation = Get-AppInstallLocation totalcmd
    if ($installLocation) { return $installLocation }

    if (Test-Path c:\totalcmd) { return "c:\totalcmd" }
}

function Set-TCIniFilesLocation() {
    Set-ItemProperty 'HKCU:\SOFTWARE\Ghisler\Total Commander' IniFileName '%COMMANDER_PATH%\wincmd.ini'
    Set-ItemProperty 'HKCU:\SOFTWARE\Ghisler\Total Commander' FtpIniName  '%COMMANDER_PATH%\wcx_ftp.ini'
}
tools\installer.zip
md5: DACA3E2AE83FB32C74F308903F083A85 | sha1: CC5E69373C4AC35813C437CAF0CBC86A66CD040E | sha256: 80DE9C2C49FC63965CF0E9BCB1A0E6D25187A1613BDE2086BDA79EFBDC8FCEB8 | sha512: B4B0E630899EEB56538ABFA54738F1653DB68121EB6DA97B0F6612E7398AC1F50A1007B85DCE10876CFA4058526671659EF12D970FAFE126F2703D5CFDC0161D
tools\tcmd1000x32_64.exe
md5: C75353937D3452D1304748A7EBC7559B | sha1: 3BDD4B1D10AE2F6DD97A1B31ECFCD5500DDC3631 | sha256: 1B65031E4D19073E997B6AF5C6369BC06A52FF40A561C75DC2C6D22738327A3E | sha512: 51690675A019C346DE79D760A63E5DCA15EE2419C46E3F02A40ED1B21419AFEED71D71D543F849B39B81A6CBFF8E88D1CAB76819C4295D4341CBA27C97558E54

No results available for this package. We are building up results for older packages over time so expect to see results. If this is a new package, it should have results within a day or two.

Version Downloads Last Updated Status
Total Commander 10.0 35 Thursday, June 10, 2021
Waiting for Maintainer
gravatar
Total Commander 9.50 8941 Tuesday, February 18, 2020 Approved
Total Commander 9.22.1 38758 Friday, March 29, 2019 Approved
Total Commander 9.22 3472 Thursday, March 14, 2019 Approved
Total Commander 9.21.1 15633 Tuesday, October 16, 2018 Approved
Total Commander 9.21 7687 Wednesday, August 15, 2018 Approved
Total Commander 9.20 5134 Wednesday, July 4, 2018 Approved
Total Commander 9.12.0.20180528 4634 Monday, May 28, 2018 Approved
Total Commander 9.12.0.20180226 10851 Monday, February 26, 2018 Approved
Discussion for the Total Commander Package

Ground Rules:

  • This discussion is only about Total Commander and the Total Commander package. If you have feedback for Chocolatey, please contact the Google Group.
  • This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
  • The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
  • Tell us what you love about the package or Total Commander, or tell us what needs improvement.
  • Share your experiences with the package, or extra configuration or gotchas that you've found.
  • If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.
comments powered by Disqus