Ansible
PS DSC
Downloads:
6,451,179
Downloads of v 0.0.15.20170613:
2,136
Last Update:
14 Jun 2017
Package Maintainer(s):
Software Author(s):
- Microsoft
Tags:
openssh admin- Software Specific:
- Software Site
- Software Source
- Software License
- Software Docs
- Software Issues
- Package Specific:
- Package Source
- Package outdated?
- Package broken?
- Contact Maintainers
- Contact Site Admins
- Software Vendor?
- Report Abuse
- Download
Win32 OpenSSH (Universal Installer)
This is not the latest version of Win32 OpenSSH (Universal Installer) available.
- 1
- 2
- 3
0.0.15.20170613 | Updated: 14 Jun 2017
- Software Specific:
- Software Site
- Software Source
- Software License
- Software Docs
- Software Issues
- Package Specific:
- Package Source
- Package outdated?
- Package broken?
- Contact Maintainers
- Contact Site Admins
- Software Vendor?
- Report Abuse
- Download
Downloads:
6,451,179
Downloads of v 0.0.15.20170613:
2,136
Maintainer(s):
Software Author(s):
- Microsoft
Win32 OpenSSH (Universal Installer) 0.0.15.20170613
This is not the latest version of Win32 OpenSSH (Universal Installer) available.
Legal Disclaimer: Neither this package nor Chocolatey Software, Inc. are affiliated with or endorsed by Microsoft. The inclusion of Microsoft trademark(s), if any, upon this webpage is solely to identify Microsoft goods or services and not for commercial purposes.
- 1
- 2
- 3
Some Checks Have Failed or Are Not Yet Complete
Not All Tests Have Passed
Validation Testing Passed
Verification Testing Passed
DetailsScan Testing Resulted in Flagged:
This package was submitted (and approved) prior to automated virus scanning integration into the package moderation processs.
We recommend clicking the "Details" link to make your own decision on installing this package.
Deployment Method: Individual Install, Upgrade, & Uninstall
To install Win32 OpenSSH (Universal Installer), run the following command from the command line or from PowerShell:
>
To upgrade Win32 OpenSSH (Universal Installer), run the following command from the command line or from PowerShell:
>
To uninstall Win32 OpenSSH (Universal Installer), run the following command from the command line or from PowerShell:
>
Deployment Method:
NOTE
This applies to both open source and commercial editions of Chocolatey.
1. Enter Your Internal Repository Url
(this should look similar to https://community.chocolatey.org/api/v2/)
2. Setup Your Environment
1. Ensure you are set for organizational deployment
Please see the organizational deployment guide
2. Get the package into your environment
Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)-
Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the package and push it to a repository Download
-
Open Source
-
Download the package:
Download - Follow manual internalization instructions
-
-
Package Internalizer (C4B)
-
Run: (additional options)
choco download openssh --internalize --version=0.0.15.20170613 --source=https://community.chocolatey.org/api/v2/ -
For package and dependencies run:
choco push --source="'INTERNAL REPO URL'" - Automate package internalization
-
Run: (additional options)
3. Copy Your Script
choco upgrade openssh -y --source="'INTERNAL REPO URL'" --version="'0.0.15.20170613'" [other options]See options you can pass to upgrade.
See best practices for scripting.
Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.
If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:
choco upgrade openssh -y --source="'INTERNAL REPO URL'" --version="'0.0.15.20170613'"
$exitCode = $LASTEXITCODE
Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
Exit 0
}
Exit $exitCode
- name: Install openssh
win_chocolatey:
name: openssh
version: '0.0.15.20170613'
source: INTERNAL REPO URL
state: present
See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.
chocolatey_package 'openssh' do
action :install
source 'INTERNAL REPO URL'
version '0.0.15.20170613'
end
See docs at https://docs.chef.io/resource_chocolatey_package.html.
cChocoPackageInstaller openssh
{
Name = "openssh"
Version = "0.0.15.20170613"
Source = "INTERNAL REPO URL"
}
Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.
package { 'openssh':
ensure => '0.0.15.20170613',
provider => 'chocolatey',
source => 'INTERNAL REPO URL',
}
Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.
4. If applicable - Chocolatey configuration/installation
See infrastructure management matrix for Chocolatey configuration elements and examples.
Package Approved
This package was approved as a trusted package on 14 Jun 2017.
Description
Open SSH tools for Windows.
*****************************************************************************
This package is actually a universal installer that can install in any scenario - including without Chocolatey.
Read here for more information: https://github.com/DarwinJS/ChocoPackages/blob/master/openssh/readme.md
*****************************************************************************
CloudyWindows.com Utility Scripts:
* Set-SSHKeyPermissions.ps1
This package supports the following parameters:
-params '"/SSHServerFeature"' (Install and Uninstall)
Also install sshd Windows Service - including opening port 22.
If this parameter is not included on an upgrade or uninstall and
the sshd server is installed - an error is generated. You must
use this switch to indicate you have made preparations for the
sshd service to be interrupted or removed.
-params '"/SSHAgentFeature"'
Installs SSH Agent Service even if SSHD Server is not being installed.
Requires admin rights to configure service.
This option is automatically set when /SSHServerFeature is used.
-params '"/SSHServerFeature /SSHServerPort:3834"'
Allows the setup of the SSH server on an alternate port - sometimes done for security or to avoid conflicts with an existing service on port 22.
-params '"/OverWriteSSHDConf"'
Introduced in Version: 0.0.9.20170311
By default an existing sshd_conf file will not be overwritten (previous packaging versions always overwrote)
Use this switch to overwrite an existing sshd_conf with the one from the current install media
-params '"/SSHLogLevel:VERBOSE"'
Introduced in Version: 0.0.9.20170311
Allows the setup of the SSH logging level.
Valid Options: QUIET, FATAL, ERROR, INFO, VERBOSE, DEBUG, DEBUG1, DEBUG2, DEBUG3
On a fresh install LogLevel is set to QUIET
-params '"/TERM:xterm-new"'
Introduced in Version: 0.0.14.0
Allows the initial setup and subsequent update of the TERM system environment variable.
On a fresh install TERM is set to xterm whether or not this switch is used.
-params '"/DisableKeyPermissionsReset"'
Introduced in Version: 0.0.15.0
As of 0.0.13.0 new key permissions are required for ssh keys. By default this installer
reasserts these permissions whenever run. Used this switch if you do not want the installation
to attempt to manage key permissions. The utility script will still be installed and available
if you need to use it later to fix up permissions.
-params '"/SSHServerFeature /DeleteServerKeysAfterInstalled"'
Also install sshd Windows Service - including opening port 22 and
it with Key Based Authentication (reboot required before active)
Server keys are deleted after added to the ssh-agent (you will not have an opportunity to copy them)
-params '"/SSHServerFeature /DeleteConfigAndServerKeys"' (Uninstall)
By default an uninstall does not remove config files nor server keys.
-params '"/UseNTRights"'
By default the install uses PowerShell code that works on operating systems that cannot run the 32-bit ntrights.exe (Nano, Server Core w/out WOW64).
If this code does not work for you, you can use this switch to invoke the 32-bit ntrights.exe
Files
tools\7z.dll
md5: 9943B3BCB2CA91CCBEF2D96682CECB79 | sha1: D467F1F7A8407D1650060C8FE3DC6A0CCFF4D409 | sha256: 7F47382791A5264EED7310706E105C1CFA0E727359102F14933D4927BD296640 | sha512: D724BA334CEC2E3D69BBC93FEA635377EDC941962E2FFBE8246C2ADA80D445DEAB7F3BB5A18FCEAE295428C5B47CE42F3CD56F94AB9F170560DDDED167BE2995
tools\7z.exe
md5: 506E5B371882A5A62B669F04CE04DBA8 | sha1: 7447EB123655792FEDE586AD049AC737EFFA9E6C | sha256: BB783A594067DB5CB4E43030D9E6928636555A9CE6AA3533532731975094230A | sha512: 7F367D22B95E14AF8BDA3BE1354A4A54EDFDA283700D086878FEA72B349E64B497F2D241AE31E0B2B0C56957D3A39299E51E09B0D67D2C6201AE20033555212E
tools\7z.exe.ignore
tools\AddAccountToAssignPrimaryToken.ps1
param($accountToAdd)
#written by Ingo Karstein, http://blog.karstein-consulting.com
# v1.0, 01/03/2014
## <--- Configure here
if( [string]::IsNullOrEmpty($accountToAdd) ) {
Write-Host "no account specified"
exit
}
## ---> End of Config
$sidstr = $null
try {
$ntprincipal = new-object System.Security.Principal.NTAccount "$accountToAdd"
$sid = $ntprincipal.Translate([System.Security.Principal.SecurityIdentifier])
$sidstr = $sid.Value.ToString()
} catch {
$sidstr = $null
}
Write-Host "Account: $($accountToAdd)" -ForegroundColor DarkCyan
if( [string]::IsNullOrEmpty($sidstr) ) {
Write-Host "Account not found!" -ForegroundColor Red
exit -1
}
Write-Host "Account SID: $($sidstr)" -ForegroundColor DarkCyan
$tmp = [System.IO.Path]::GetTempFileName()
Write-Host "Export current Local Security Policy" -ForegroundColor DarkCyan
secedit.exe /export /cfg "$($tmp)"
$c = Get-Content -Path $tmp
$currentSetting = ""
foreach($s in $c) {
if( $s -like "SeAssignPrimaryTokenPrivilege*") {
$x = $s.split("=",[System.StringSplitOptions]::RemoveEmptyEntries)
$currentSetting = $x[1].Trim()
}
}
if( $currentSetting -notlike "*$($sidstr)*" ) {
Write-Host "Modify Setting ""Replace a process level token""" -ForegroundColor DarkCyan
if( [string]::IsNullOrEmpty($currentSetting) ) {
$currentSetting = "*$($sidstr)"
} else {
$currentSetting = "*$($sidstr),$($currentSetting)"
}
Write-Host "$currentSetting"
$outfile = @"
[Unicode]
Unicode=yes
[Version]
signature="`$CHICAGO`$"
Revision=1
[Privilege Rights]
SeAssignPrimaryTokenPrivilege = $($currentSetting)
"@
$tmp2 = [System.IO.Path]::GetTempFileName()
Write-Host "Import new settings to Local Security Policy" -ForegroundColor DarkCyan
$outfile | Set-Content -Path $tmp2 -Encoding Unicode -Force
#notepad.exe $tmp2
Push-Location (Split-Path $tmp2)
try {
secedit.exe /configure /db "secedit.sdb" /cfg "$($tmp2)" /areas USER_RIGHTS
#write-host "secedit.exe /configure /db ""secedit.sdb"" /cfg ""$($tmp2)"" /areas USER_RIGHTS "
} finally {
Pop-Location
}
} else {
Write-Host "NO ACTIONS REQUIRED! Account already in ""Replace a process level token""" -ForegroundColor DarkCyan
}
Write-Host "Done." -ForegroundColor DarkCyan
tools\AddAccountToLogonAsAService.ps1
param($accountToAdd)
#written by Ingo Karstein, http://blog.karstein-consulting.com
# v1.0, 01/03/2014
## <--- Configure here
if( [string]::IsNullOrEmpty($accountToAdd) ) {
Write-Host "no account specified"
exit
}
## ---> End of Config
$sidstr = $null
try {
$ntprincipal = new-object System.Security.Principal.NTAccount "$accountToAdd"
$sid = $ntprincipal.Translate([System.Security.Principal.SecurityIdentifier])
$sidstr = $sid.Value.ToString()
} catch {
$sidstr = $null
}
Write-Host "Account: $($accountToAdd)" -ForegroundColor DarkCyan
if( [string]::IsNullOrEmpty($sidstr) ) {
Write-Host "Account not found!" -ForegroundColor Red
exit -1
}
Write-Host "Account SID: $($sidstr)" -ForegroundColor DarkCyan
$tmp = [System.IO.Path]::GetTempFileName()
Write-Host "Export current Local Security Policy" -ForegroundColor DarkCyan
secedit.exe /export /cfg "$($tmp)"
$c = Get-Content -Path $tmp
$currentSetting = ""
foreach($s in $c) {
if( $s -like "SeServiceLogonRight*") {
$x = $s.split("=",[System.StringSplitOptions]::RemoveEmptyEntries)
$currentSetting = $x[1].Trim()
}
}
if( $currentSetting -notlike "*$($sidstr)*" ) {
Write-Host "Modify Setting ""Logon as a Service""" -ForegroundColor DarkCyan
if( [string]::IsNullOrEmpty($currentSetting) ) {
$currentSetting = "*$($sidstr)"
} else {
$currentSetting = "*$($sidstr),$($currentSetting)"
}
Write-Host "$currentSetting"
$outfile = @"
[Unicode]
Unicode=yes
[Version]
signature="`$CHICAGO`$"
Revision=1
[Privilege Rights]
SeServiceLogonRight = $($currentSetting)
"@
$tmp2 = [System.IO.Path]::GetTempFileName()
Write-Host "Import new settings to Local Security Policy" -ForegroundColor DarkCyan
$outfile | Set-Content -Path $tmp2 -Encoding Unicode -Force
#notepad.exe $tmp2
Push-Location (Split-Path $tmp2)
try {
secedit.exe /configure /db "secedit.sdb" /cfg "$($tmp2)" /areas USER_RIGHTS
#write-host "secedit.exe /configure /db ""secedit.sdb"" /cfg ""$($tmp2)"" /areas USER_RIGHTS "
} finally {
Pop-Location
}
} else {
Write-Host "NO ACTIONS REQUIRED! Account already in ""Logon as a Service""" -ForegroundColor DarkCyan
}
Write-Host "Done." -ForegroundColor DarkCyan
tools\barebonesinstaller.ps1
tools\chocolateyinstall.ps1
tools\chocolateyuninstall.ps1
$ErrorActionPreference = 'Stop'; # stop on all errors
$ProductName = (Get-ItemProperty -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion' -Name 'ProductName').ProductName
$EditionId = (Get-ItemProperty -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion' -Name 'EditionID').EditionId
Write-Output "Running on: $ProductName, ($EditionId)"
If ($EditionId -ilike '*Nano*')
{$RunningOnNano = $True}
If (Test-Path variable:shimgen)
{$RunningUnderChocolatey = $True}
Else
{ Write-Output "Running Without Chocolatey"}
$packageName= 'openssh'
$toolsDir = "$(Split-Path -parent $MyInvocation.MyCommand.Definition)"
$OSBits = ([System.IntPtr]::Size * 8) #Get-ProcessorBits
#On 64-bit, always favor 64-bit Program Files no matter what our execution is now (works back past XP / Server 2003)
If ($env:ProgramFiles.contains('x86'))
{
$PF = $env:ProgramFiles.replace(' (x86)','')
}
Else
{
$PF = $env:ProgramFiles
}
#$TargetFolder = "$PF\OpenSSH"
$TargetFolder = "$PF\OpenSSH-Win$($OSBits)"
$TargetFolderOld = "$PF\OpenSSH-Win$($OSBits)"
If ($RunningUnderChocolatey)
{
# Default the values before reading params
$SSHServerFeature = $false
$KeyBasedAuthenticationFeature = $false
$DeleteConfigAndServerKeys = $false
$arguments = @{};
$packageParameters = $env:chocolateyPackageParameters
}
# Now parse the packageParameters using good old regular expression
if ($packageParameters) {
$match_pattern = "\/(?<option>([a-zA-Z]+)):(?<value>([`"'])?([a-zA-Z0-9- _\\:\.]+)([`"'])?)|\/(?<option>([a-zA-Z]+))"
#"
$option_name = 'option'
$value_name = 'value'
if ($packageParameters -match $match_pattern ){
$results = $packageParameters | Select-String $match_pattern -AllMatches
$results.matches | % {
$arguments.Add(
$_.Groups[$option_name].Value.Trim(),
$_.Groups[$value_name].Value.Trim())
}
}
else
{
throw "Package Parameters were found but were invalid (REGEX Failure)"
}
if ($arguments.ContainsKey("SSHServerFeature")) {
Write-Host "/SSHServerFeature - Uninstalling SSH Server Feature if Present."
$SSHServerFeature = $true
}
if ($arguments.ContainsKey("DeleteConfigAndServerKeys")) {
Write-Host "/DeleteConfigAndServerKeys - Removing SSH Config and Server Keys."
$DeleteConfigAndServerKeys = $true
}
} else {
Write-Debug "No Package Parameters Passed in";
}
Function CheckServicePath ($ServiceEXE,$FolderToCheck)
{
#The modern way:
#Return ([bool]((Get-WmiObject win32_service | ?{$_.Name -ilike "*$ServiceEXE*"} | select -expand PathName) -ilike "*$FolderToCheck*"))
#The NANO TP5 Compatible Way:
Return ([bool]((wmic service | ?{$_ -ilike "*$ServiceEXE*"}) -ilike "*$FolderToCheck*"))
}
#$SSHServiceInstanceExistsAndIsOurs = ([bool]((Get-WmiObject win32_service | ?{$_.Name -ilike 'sshd'} | select -expand PathName) -ilike "*$TargetFolder*"))
$SSHServiceInstanceExistsAndIsOurs = CheckServicePath 'sshd' "$TargetFolder"
#$SSHAGENTServiceInstanceExistsAndIsOurs = ([bool]((Get-WmiObject win32_service | ?{$_.Name -ilike 'ssh-agent'} | select -expand PathName) -ilike "*$TargetFolder*"))
$SSHAGENTServiceInstanceExistsAndIsOurs = CheckServicePath 'ssh-agent' "$TargetFolder"
If ($SSHServerFeature -AND (!$SSHServiceInstanceExistsAndIsOurs) -AND (Get-Service sshd -ErrorAction SilentlyContinue))
{
$ExistingSSHDInstancePath = (Get-WmiObject win32_service | ?{$_.Name -ilike 'sshd'} | select -expand PathName)
Throw "You have requested that the SSHD service be uninstalled, but this system appears to have an instance of an SSHD service configured for another folder ($ExistingSSHDInstancePath). Ignoring /SSHServerFeature"
$SSHServerFeature = $False
}
If ((!$SSHServerFeature) -AND $SSHServiceInstanceExistsAndIsOurs)
{
Throw "There is a configured instance of the SSHD service, please specify the /SSHServerFeature to confirm it is OK to UNINSTALL the SSHD service at this time."
}
If ([bool](get-process ssh -erroraction silentlycontinue | where {$_.Path -ilike "*$TargetPath*"}))
{
Throw "It appears you have instances of ssh.exe (client) running from the folder this package installs to, please terminate them and try again."
}
If ($SSHServiceInstanceExistsAndIsOurs -AND ([bool](Get-Service SSHD -ErrorAction SilentlyContinue | where {$_.Status -ieq 'Running'})))
{
Stop-Service SSHD -Force
Stop-Service SSH-Agent -Force
Start-Sleep -seconds 3
If (([bool](Get-Service SSHD | where {$_.Status -ieq 'Running'})))
{
Throw "Could not stop the SSHD service, please stop manually and retry this package."
}
Stop-Service ssh-agent -Force
Start-Sleep -seconds 3
If (([bool](Get-Service ssh-agent | where {$_.Status -ieq 'Running'})))
{
Throw "Could not stop the ssh-agent service, please stop manually and retry this package."
}
}
If ((get-item 'Registry::HKLM\System\CurrentControlSet\Control\Lsa').getvalue("authentication packages") -contains 'ssh-lsa')
{
$KeyBasedAuthenticationFeatureINSTALLED = $True
Write-Warning "ssh-lsa.dll will be deconfigured - but not deleted. It must be manually deleted after a reboot."
}
#uninstall agent service if it was installed without SSHD
If ($SSHAGENTServiceInstanceExistsAndIsOurs -AND (!$SSHServiceInstanceExistsAndIsOurs))
{
Stop-Service ssh-agent -Force
sc.exe delete ssh-agent | out-null
}
If ($SSHServiceInstanceExistsAndIsOurs -AND ($SSHServerFeature))
{
Stop-Service sshd -Force
sc.exe delete sshd | out-null
Stop-Service ssh-agent -Force
sc.exe delete ssh-agent | out-null
}
If ($KeyBasedAuthenticationFeatureINSTALLED)
{
If (Test-Path "$env:windir\sysnative")
{ #We are running in a 32-bit process under 64-bit Windows
$sys32dir = "$env:windir\sysnative"
}
Else
{ #We are on a 32-bit OS, or 64-bit proc on 64-bit OS
$sys32dir = "$env:windir\system32"
}
$AuthpkgToRemove = 'ssh-lsa'
foreach ($authpackage in (get-item 'Registry::HKLM\System\CurrentControlSet\Control\Lsa').getvalue("authentication packages"))
{
If ($authpackage)
{
If ($authpackage -ine "$AuthpkgToRemove")
{
[string[]]$Newauthpackages += "$authpackage"
}
}
}
Set-ItemProperty "HKLM:\SYSTEM\CurrentControlSet\Control\Lsa\" "Authentication Packages" $Newauthpackages
}
#Don't remove config in case they reinstall.
If (($SSHServiceInstanceExistsAndIsOurs -AND $DeleteConfigAndServerKeys) -OR (!$SSHServiceInstanceExistsAndIsOurs))
{
Write-Warning "Removing all config and server keys as requested by /DeleteConfigAndServerKeys"
#Ensure we have permissions to all keys and config files:
#$ErrorActionPreference = 'SilentlyContinue'
Import-Module "$toolsdir\OpenSSHUtils"
$RunningUser = New-Object System.Security.Principal.NTAccount($($env:USERDOMAIN), $($env:USERNAME))
# dir "$TargetFolder\*" | % {repair-filepermission -FilePath $_.fullname -Owners $RunningUser -ReadAccessOK $RunningUser -AnyAccessOK $RunningUser -confirm:$false}
dir "$TargetFolder\*" | % {repair-filepermission -FilePath $_.fullname -ReadAccessOK $RunningUser -AnyAccessOK $RunningUser -ReadAccessNeeded $RunningUser -confirm:$false}
If (Test-Path $TargetFolder) {Remove-Item "$TargetFolder" -Recurse -Force}
#$ErrorActionPreference = 'Stop'
}
Else
{
If (Test-Path $TargetFolder) {Get-ChildItem "$TargetFolder\*.*" -include *.exe,*.dll,*.cmd,*.ps1,*.psm1,*.psd1 | Remove-Item -Recurse -Force}
If (Test-Path "$TargetFolder\logs") {Remove-Item "$TargetFolder\logs" -Recurse -Force}
Write-Warning "NOT REMOVED: Config files and any keys in `"$TargetFolder`" were NOT REMOVED - you must remove them manually or use the package uninstall parameter /DeleteConfigAndServerKeys."
}
netsh advfirewall firewall delete rule name='SSHD Port OpenSSH (chocolatey package: openssh)'
$PathToRemove = "$TargetFolder"
#Code has been modified to work with Nano - do not change method of environment variable access
#foreach ($path in [Environment]::GetEnvironmentVariable("PATH","Machine").split(';'))
foreach ($path in ((Get-ItemProperty 'Registry::HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment').path.split(';')))
{
If ($Path)
{
If (($path -ine "$PathToRemove") -AND ($path -ine "$PathToRemove\"))
{
[string[]]$Newpath += "$path"
}
}
}
$AssembledNewPath = ($newpath -join(';')).trimend(';')
Set-ItemProperty -Path 'Registry::HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment' -Name 'PATH' -Value "$AssembledNewPath"
$TermVarExists = [bool](get-ItemProperty -Path 'Registry::HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment' -Name 'TERM' -EA SilentlyContinue)
If ($TermVarExists)
{
Remove-ItemProperty -Path 'Registry::HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment' -Name 'TERM'
}
tools\fileinuseutils.ps1
Add-Type @'
using System;
using System.Text;
using System.Runtime.InteropServices;
public class LockedFileUtils
{
public enum MoveFileFlags
{
MOVEFILE_REPLACE_EXISTING = 0x00000001,
MOVEFILE_COPY_ALLOWED = 0x00000002,
MOVEFILE_DELAY_UNTIL_REBOOT = 0x00000004,
MOVEFILE_WRITE_THROUGH = 0x00000008,
MOVEFILE_CREATE_HARDLINK = 0x00000010,
MOVEFILE_FAIL_IF_NOT_TRACKABLE = 0x00000020
}
[DllImport("kernel32.dll", SetLastError = true, CharSet = CharSet.Unicode)]
static extern bool MoveFileEx(string lpExistingFileName, string lpNewFileName, MoveFileFlags dwFlags);
public static bool DeleteLockedFile (string sourcefile)
{
return MoveFileEx(sourcefile, null, MoveFileFlags.MOVEFILE_DELAY_UNTIL_REBOOT);
}
public static bool CopyLockedFile (string sourcefile, string destination)
{
return MoveFileEx(sourcefile, destination, MoveFileFlags.MOVEFILE_DELAY_UNTIL_REBOOT);
}
}
'@
Function Remove-FileEvenIfLocked
{
param ([parameter(mandatory=$true,ValueFromPipeline=$true)][string]$Path)
Process
{
$path = (Resolve-Path $path -ErrorAction Stop).Path
try
{
Remove-Item $path -ErrorAction Stop
}
catch [System.IO.IOException]
{
If ($_.exception -ilike "*used by another process*")
{
Write-host "$path is locked by another process, attempting to setup removal at reboot..."
$deleteResult = [LockedFileUtils]::DeleteLockedFile($path)
if ($deleteResult -eq $false)
{
throw "Was not able to remove in use file $path `r`n $(New-Object System.ComponentModel.Win32Exception)"
}
else
{
write-host "(File locked. Deleting $path at next reboot. Reboot is required to complete operation.)"
}
}
}
}
}
Function Copy-FileEvenIfLocked
{
param ([parameter(mandatory=$true,ValueFromPipeline=$true)][string]$Path,
[parameter(mandatory=$true,ValueFromPipeline=$true)][string]$Destination)
Process
{
$Path = (Resolve-Path $path -ErrorAction Stop).Path
Write-output "`$path is now $path"
If (Test-Path $Destination)
{
$Destination = (Resolve-Path $Destination -ErrorAction Stop).Path
}
Write-output "`$Destination is now $Destination"
try
{
Copy-Item $Path $Destination -ErrorAction Stop
Return "RebootNotRequired"
}
catch [System.IO.IOException]
{
If ($_.exception -ilike "*used by another process*")
{
Write-host "$path is locked by another process, attempting to setup copy at reboot..."
$copyResult = [LockedFileUtils]::CopyLockedFile($path,$Destination)
if ($copyResult -eq $false)
{
throw "Was not able to copy in use file $path to $destination `r`n $(New-Object System.ComponentModel.Win32Exception)"
}
else
{
write-host "Destination file is locked. Copying $path to $Destination at next reboot. Reboot is required to complete operation.)"
Return "RebootRequired"
}
}
}
}
}
tools\FixHostFilePermissions.ps1
tools\FixUserFilePermissions.ps1
tools\Get-NetStat.ps1
function Get-NetStat
{
<#
.SYNOPSIS
This function will get the output of netstat -n and parse the output
.DESCRIPTION
This function will get the output of netstat -n and parse the output
.LINK
http://www.lazywinadmin.com/2014/08/powershell-parse-this-netstatexe.html
.NOTES
Francois-Xavier Cat
www.lazywinadmin.com
@LazyWinAdm
2016/09/20 - Modified by DawinJS to:
- only grab TCP ports so that parsing PID would be reliable (and is sufficient for my purposes)
- If -GetProcessDetails
- parse PID
- use "get-process" to find exe name (netstat -b is not pulling it for my scenario)
- finds a full process path name in a Nano TP5 compatible way (WMIC)
- If -ShowProgress - show progress bar - takes a while to grab all exe paths for all processes
- If -FilterOnPorts - filter results for these ports before grabbing process details
#>
Param (
[switch]$ShowProgress,
[string[]]$FilterOnPorts,
[switch]$GetProcessDetails
)
PROCESS
{
# Get the output of netstat
$data = netstat -a -n -o -p TCP | select -skip 4
# Keep only the line with the data (we remove the first lines)
#$data = $data[4..$data.count]
# Each line need to be splitted and get rid of unnecessary spaces
foreach ($line in $data)
{
If ($ShowProgress)
{
$ItemBeingProcessed++
$percentdone = [math]::round(($ItemBeingProcessed/$data.count) * 100)
Write-Progress -Activity "Probing Listening Ports" -Status "$percentdone% Complete:" -PercentComplete $percentdone
}
$AddInstance = $True
# Get rid of the first whitespaces, at the beginning of the line
$line = $line -replace '^\s+', ''
# Split each property on whitespaces block
$line = $line -split '\s+'
$PortFromNetStat = (($line[1] -split ":")[1]).trim(' ')
If ($FilterOnPorts)
{
If (!($FilterOnPorts -contains $PortFromNetStat))
{
$AddInstance = $False
}
}
If ($GetProcessDetails -AND $AddInstance)
{
If ($line[4].length -ge 1)
{
$ProcessInfo = Get-Process -id $($line[4])
$ProcessEXEPath = $null
If ([string](wmic process where "ProcessId='$($line[4])'" get ExecutablePath /format:list) -match "[A-Z]:\\.*exe")
{
#write-output "match: *$($Matches[0])*"
$ProcessEXEPath = "$($Matches[0])"
}
<#
If (Test-Path variable:matches) {write-host "got a match"}
If ($getresult.GetType().Name -eq 'Boolean')
{
$ProcessEXEPath = ($Matches[0]).trimend(' ')
}
ElseIf ($getresult.GetType().Name -eq 'String')
{
$ProcessEXEPath = $getresult.trimend(' ')
}
Else
{
$ProcessEXEPath = ''
}
#>
}
}
If ($AddInstance)
{
# Define the properties
$properties = @{
Protocol = $line[0].trim(' ')
LocalAddressIP = ($line[1] -split ":")[0].trim(' ')
LocalAddressPort = $PortFromNetStat
LocalAddressPID = ($line[4]).trim(' ')
LocalAddressProcessName = $ProcessInfo.Name
LocalAddressProcessPath = $ProcessEXEPath
ForeignAddressIP = ($line[2] -split ":")[0].trim(' ')
ForeignAddressPort = ($line[2] -split ":")[1].trim(' ')
State = $line[3]
}
# Output the current line
New-Object -TypeName PSObject -Property $properties
}
}
}
}
tools\LICENSE.txt
This file is part of the OpenSSH software.
The licences which components of this software fall under are as
follows. First, we will summarize and say that all components
are under a BSD licence, or a licence more free than that.
OpenSSH contains no GPL code.
1)
* Copyright (c) 1995 Tatu Ylonen <[email protected]>, Espoo, Finland
* All rights reserved
*
* As far as I am concerned, the code I have written for this software
* can be used freely for any purpose. Any derived versions of this
* software must be clearly marked as such, and if the derived work is
* incompatible with the protocol description in the RFC file, it must be
* called by a name other than "ssh" or "Secure Shell".
[Tatu continues]
* However, I am not implying to give any licenses to any patents or
* copyrights held by third parties, and the software includes parts that
* are not under my direct control. As far as I know, all included
* source code is used in accordance with the relevant license agreements
* and can be used freely for any purpose (the GNU license being the most
* restrictive); see below for details.
[However, none of that term is relevant at this point in time. All of
these restrictively licenced software components which he talks about
have been removed from OpenSSH, i.e.,
- RSA is no longer included, found in the OpenSSL library
- IDEA is no longer included, its use is deprecated
- DES is now external, in the OpenSSL library
- GMP is no longer used, and instead we call BN code from OpenSSL
- Zlib is now external, in a library
- The make-ssh-known-hosts script is no longer included
- TSS has been removed
- MD5 is now external, in the OpenSSL library
- RC4 support has been replaced with ARC4 support from OpenSSL
- Blowfish is now external, in the OpenSSL library
[The licence continues]
Note that any information and cryptographic algorithms used in this
software are publicly available on the Internet and at any major
bookstore, scientific library, and patent office worldwide. More
information can be found e.g. at "http://www.cs.hut.fi/crypto".
The legal status of this program is some combination of all these
permissions and restrictions. Use only at your own responsibility.
You will be responsible for any legal consequences yourself; I am not
making any claims whether possessing or using this is legal or not in
your country, and I am not taking any responsibility on your behalf.
NO WARRANTY
BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
2)
The 32-bit CRC compensation attack detector in deattack.c was
contributed by CORE SDI S.A. under a BSD-style license.
* Cryptographic attack detector for ssh - source code
*
* Copyright (c) 1998 CORE SDI S.A., Buenos Aires, Argentina.
*
* All rights reserved. Redistribution and use in source and binary
* forms, with or without modification, are permitted provided that
* this copyright notice is retained.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES ARE DISCLAIMED. IN NO EVENT SHALL CORE SDI S.A. BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY OR
* CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OR MISUSE OF THIS
* SOFTWARE.
*
* Ariel Futoransky <[email protected]>
* <http://www.core-sdi.com>
3)
ssh-keyscan was contributed by David Mazieres under a BSD-style
license.
* Copyright 1995, 1996 by David Mazieres <[email protected]>.
*
* Modification and redistribution in source and binary forms is
* permitted provided that due credit is given to the author and the
* OpenBSD project by leaving this copyright notice intact.
4)
The Rijndael implementation by Vincent Rijmen, Antoon Bosselaers
and Paulo Barreto is in the public domain and distributed
with the following license:
* @version 3.0 (December 2000)
*
* Optimised ANSI C code for the Rijndael cipher (now AES)
*
* @author Vincent Rijmen <[email protected]>
* @author Antoon Bosselaers <[email protected]>
* @author Paulo Barreto <[email protected]>
*
* This code is hereby placed in the public domain.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ''AS IS'' AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
5)
One component of the ssh source code is under a 3-clause BSD license,
held by the University of California, since we pulled these parts from
original Berkeley code.
* Copyright (c) 1983, 1990, 1992, 1993, 1995
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
6)
Remaining components of the software are provided under a standard
2-term BSD licence with the following names as copyright holders:
Markus Friedl
Theo de Raadt
Niels Provos
Dug Song
Aaron Campbell
Damien Miller
Kevin Steves
Daniel Kouril
Wesley Griffin
Per Allansson
Nils Nordman
Simon Wilkinson
Portable OpenSSH additionally includes code from the following copyright
holders, also under the 2-term BSD license:
Ben Lindstrom
Tim Rice
Andre Lucas
Chris Adams
Corinna Vinschen
Cray Inc.
Denis Parker
Gert Doering
Jakob Schlyter
Jason Downs
Juha Yrj�l�
Michael Stone
Networks Associates Technology, Inc.
Solar Designer
Todd C. Miller
Wayne Schroeder
William Jones
Darren Tucker
Sun Microsystems
The SCO Group
Daniel Walsh
Red Hat, Inc
Simon Vallet / Genoscope
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
8) Portable OpenSSH contains the following additional licenses:
a) md5crypt.c, md5crypt.h
* "THE BEER-WARE LICENSE" (Revision 42):
* <[email protected]> wrote this file. As long as you retain this
* notice you can do whatever you want with this stuff. If we meet
* some day, and you think this stuff is worth it, you can buy me a
* beer in return. Poul-Henning Kamp
b) snprintf replacement
* Copyright Patrick Powell 1995
* This code is based on code written by Patrick Powell
* ([email protected]) It may be used for any purpose as long as this
* notice remains intact on all source code distributions
c) Compatibility code (openbsd-compat)
Apart from the previously mentioned licenses, various pieces of code
in the openbsd-compat/ subdirectory are licensed as follows:
Some code is licensed under a 3-term BSD license, to the following
copyright holders:
Todd C. Miller
Theo de Raadt
Damien Miller
Eric P. Allman
The Regents of the University of California
Constantin S. Svintsoff
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
Some code is licensed under an ISC-style license, to the following
copyright holders:
Internet Software Consortium.
Todd C. Miller
Reyk Floeter
Chad Mynhier
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND TODD C. MILLER DISCLAIMS ALL
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL TODD C. MILLER BE LIABLE
* FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
Some code is licensed under a MIT-style license to the following
copyright holders:
Free Software Foundation, Inc.
* Permission is hereby granted, free of charge, to any person obtaining a *
* copy of this software and associated documentation files (the *
* "Software"), to deal in the Software without restriction, including *
* without limitation the rights to use, copy, modify, merge, publish, *
* distribute, distribute with modifications, sublicense, and/or sell *
* copies of the Software, and to permit persons to whom the Software is *
* furnished to do so, subject to the following conditions: *
* *
* The above copyright notice and this permission notice shall be included *
* in all copies or substantial portions of the Software. *
* *
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS *
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF *
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. *
* IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, *
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR *
* OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR *
* THE USE OR OTHER DEALINGS IN THE SOFTWARE. *
* *
* Except as contained in this notice, the name(s) of the above copyright *
* holders shall not be used in advertising or otherwise to promote the *
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************/
------
$OpenBSD: LICENCE,v 1.19 2004/08/30 09:18:08 markus Exp $
tools\ntrights.exe
md5: 416C43AEB17252EE33048BD1F277D2A5 | sha1: 085DEB77551F9F6201E5AA352B62CAD91C3005E5 | sha256: F46BAA1B6227226518E42263E9B4808F81C27D060207DF160F9AC64DEAE4F4F5 | sha512: 3155DE3FB04F1DF246D6CECFA1C89F8AE9963C18BE1CE717731FF210AB39D537BE01231002A54D4346B4116E3505F387C92DFECC18A80CE7EB99C6D33E5F1F2A
tools\ntrights.exe.ignore
tools\OpenSSH-Win32.zip
md5: 4337C572D4DC6E875FF2639A8D00473E | sha1: E39CB40DAA37B493F42A77DDC7B57A4E7674997E | sha256: A467C502688FDE09F619567A00630E2436D43D9797D2DEB759E8FFD10F6C22EB | sha512: 78B2BFB78C40AF1CAAD485D47E1837D043C9416D570A0D679E71E9BD95120C195F27F2F47FDB8EDB7EDCB6F1C03A0E9154919A091F69BD34E688CA5B4C3FD318
tools\OpenSSH-Win64.zip
md5: B5A2C14F3035C1B359D7D5727AC6F203 | sha1: B797E0DB1D4D2702F6BEE49FD178E6E94596C290 | sha256: 7680788B3CDB2338ABCDC05A0F8D37B19F7D3B763C0EAB289242A8D0FC0BB325 | sha512: 935D7A3BF6D0152C19733A829057C018A0D10B2C87946D666E733075CF5E85737F4545F9784D6599CCC7826B3B3D3AB640BC18FD24E6686343150E2013B52DB0
tools\OpenSSHUtils.psd1
#
# Module manifest for module 'OpenSSHUtils'
#
# Generated on: 6/9/2017
#
@{
# Script module or binary module file associated with this manifest
ModuleToProcess = 'OpenSSHUtils.psm1'
# Version number of this module.
ModuleVersion = '1.0.0.1'
# ID used to uniquely identify this module
GUID = '08285dee-3d08-476b-8948-1a7e2562c079'
# Author of this module
Author = 'Yanbing Wang'
# Company or vendor of this module
CompanyName = ''
# Copyright statement for this module
Copyright = ''
# Description of the functionality provided by this module
Description = 'Configure OpenSSH for Windows related security settings like file owner and permissions.'
# Functions to export from this module
FunctionsToExport = '*'
# Cmdlets to export from this module
CmdletsToExport = '*'
# Variables to export from this module
VariablesToExport = '*'
# Aliases to export from this module
AliasesToExport = '*'
# Minimum version of the Windows PowerShell engine required by this module
PowerShellVersion = '2.0'
}
tools\OpenSSHUtils.psm1
Set-StrictMode -Version 2.0
$systemAccount = New-Object System.Security.Principal.NTAccount("NT AUTHORITY", "SYSTEM")
$adminsAccount = New-Object System.Security.Principal.NTAccount("BUILTIN","Administrators")
$currentUser = New-Object System.Security.Principal.NTAccount($($env:USERDOMAIN), $($env:USERNAME))
$everyone = New-Object System.Security.Principal.NTAccount("EveryOne")
$sshdAccount = New-Object System.Security.Principal.NTAccount("NT SERVICE","sshd")
#Taken from P/Invoke.NET with minor adjustments.
$definition = @'
using System;
using System.Runtime.InteropServices;
public class AdjPriv
{
[DllImport("advapi32.dll", ExactSpelling = true, SetLastError = true)]
internal static extern bool AdjustTokenPrivileges(IntPtr htok, bool disall,
ref TokPriv1Luid newst, int len, IntPtr prev, IntPtr relen);
[DllImport("kernel32.dll", ExactSpelling = true, SetLastError = true)]
internal static extern IntPtr GetCurrentProcess();
[DllImport("advapi32.dll", ExactSpelling = true, SetLastError = true)]
internal static extern bool OpenProcessToken(IntPtr h, int acc, ref IntPtr phtok);
[DllImport("advapi32.dll", SetLastError = true)]
internal static extern bool LookupPrivilegeValue(string host, string name, ref long pluid);
[StructLayout(LayoutKind.Sequential, Pack = 1)]
internal struct TokPriv1Luid
{
public int Count;
public long Luid;
public int Attr;
}
internal const int SE_PRIVILEGE_ENABLED = 0x00000002;
internal const int SE_PRIVILEGE_DISABLED = 0x00000000;
internal const int TOKEN_QUERY = 0x00000008;
internal const int TOKEN_ADJUST_PRIVILEGES = 0x00000020;
public static bool EnablePrivilege(string privilege, bool disable)
{
bool retVal;
TokPriv1Luid tp;
IntPtr hproc = GetCurrentProcess();
IntPtr htok = IntPtr.Zero;
retVal = OpenProcessToken(hproc, TOKEN_ADJUST_PRIVILEGES | TOKEN_QUERY, ref htok);
tp.Count = 1;
tp.Luid = 0;
if(disable)
{
tp.Attr = SE_PRIVILEGE_DISABLED;
}
else
{
tp.Attr = SE_PRIVILEGE_ENABLED;
}
retVal = LookupPrivilegeValue(null, privilege, ref tp.Luid);
retVal = AdjustTokenPrivileges(htok, false, ref tp, 0, IntPtr.Zero, IntPtr.Zero);
return retVal;
}
}
'@
$type = Add-Type $definition -PassThru -ErrorAction SilentlyContinue
<#
.Synopsis
Repair-SshdConfigPermission
Repair the file owner and Permission of sshd_config
#>
function Repair-SshdConfigPermission
{
[CmdletBinding(SupportsShouldProcess=$true, ConfirmImpact="High")]
param (
[parameter(Mandatory=$true)]
[ValidateNotNullOrEmpty()]
[string]$FilePath)
Repair-FilePermission -Owners $systemAccount,$adminsAccount -ReadAccessNeeded $sshdAccount @psBoundParameters
}
<#
.Synopsis
Repair-SshdHostKeyPermission
Repair the file owner and Permission of host private and public key
-FilePath: The path of the private host key
#>
function Repair-SshdHostKeyPermission
{
[CmdletBinding(SupportsShouldProcess=$true, ConfirmImpact="High")]
param (
[parameter(Mandatory=$true)]
[ValidateNotNullOrEmpty()]
[string]$FilePath)
if($PSBoundParameters["FilePath"].EndsWith(".pub"))
{
$PSBoundParameters["FilePath"] = $PSBoundParameters["FilePath"].Replace(".pub", "")
}
Repair-FilePermission -Owners $systemAccount,$adminsAccount -ReadAccessNeeded $sshdAccount @psBoundParameters
$PSBoundParameters["FilePath"] += ".pub"
Repair-FilePermission -Owners $systemAccount,$adminsAccount -ReadAccessOK $everyone -ReadAccessNeeded $sshdAccount @psBoundParameters
}
<#
.Synopsis
Repair-AuthorizedKeyPermission
Repair the file owner and Permission of authorized_keys
#>
function Repair-AuthorizedKeyPermission
{
[CmdletBinding(SupportsShouldProcess=$true, ConfirmImpact="High")]
param (
[parameter(Mandatory=$true)]
[ValidateNotNullOrEmpty()]
[string]$FilePath)
if(-not (Test-Path $FilePath -PathType Leaf))
{
Write-host "$FilePath not found" -ForegroundColor Yellow
return
}
$fullPath = (Resolve-Path $FilePath).Path
$profileListPath = "HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList"
$profileItem = Get-ChildItem $profileListPath -ErrorAction SilentlyContinue | ? {
$properties = Get-ItemProperty $_.pspath -ErrorAction SilentlyContinue
$userProfilePath = $null
if($properties)
{
$userProfilePath = $properties.ProfileImagePath
}
$fullPath -ieq "$userProfilePath\.ssh\authorized_keys"
}
if($profileItem)
{
$userSid = $profileItem.PSChildName
$account = Get-UserAccount -UserSid $userSid
if($account)
{
Repair-FilePermission -Owners $account,$adminsAccount,$systemAccount -AnyAccessOK $account -ReadAccessNeeded $sshdAccount @psBoundParameters
}
else
{
Write-host "Can't translate $userSid to an account. skip checking $fullPath..." -ForegroundColor Yellow
}
}
else
{
Write-host "$fullPath is not in the profile folder of any user. Skip checking..." -ForegroundColor Yellow
}
}
<#
.Synopsis
Repair-UserKeyPermission
Repair the file owner and Permission of user config
-FilePath: The path of the private user key
-User: The user associated with this ssh config
#>
function Repair-UserKeyPermission
{
[CmdletBinding(SupportsShouldProcess=$true, ConfirmImpact="High")]
param (
[parameter(Mandatory=$true, Position = 0)]
[ValidateNotNullOrEmpty()]
[string]$FilePath,
[System.Security.Principal.NTAccount] $User = $currentUser)
if($PSBoundParameters["FilePath"].EndsWith(".pub"))
{
$PSBoundParameters["FilePath"] = $PSBoundParameters["FilePath"].Replace(".pub", "")
}
Repair-FilePermission -Owners $User, $adminsAccount,$systemAccount -AnyAccessOK $User @psBoundParameters
$PSBoundParameters["FilePath"] += ".pub"
Repair-FilePermission -Owners $User, $adminsAccount,$systemAccount -AnyAccessOK $User -ReadAccessOK $everyone @psBoundParameters
}
<#
.Synopsis
Repair-UserSSHConfigPermission
Repair the file owner and Permission of user config
#>
function Repair-UserSshConfigPermission
{
[CmdletBinding(SupportsShouldProcess=$true, ConfirmImpact="High")]
param (
[parameter(Mandatory=$true)]
[ValidateNotNullOrEmpty()]
[string]$FilePath)
Repair-FilePermission -Owners $currentUser,$adminsAccount,$systemAccount -AnyAccessOK $currentUser @psBoundParameters
}
<#
.Synopsis
Repair-FilePermissionInternal
Only validate owner and ACEs of the file
#>
function Repair-FilePermission
{
[CmdletBinding(SupportsShouldProcess=$true, ConfirmImpact="High")]
param (
[parameter(Mandatory=$true, Position = 0)]
[ValidateNotNullOrEmpty()]
[string]$FilePath,
[ValidateNotNull()]
[System.Security.Principal.NTAccount[]] $Owners = $currentUser,
[System.Security.Principal.NTAccount[]] $AnyAccessOK,
[System.Security.Principal.NTAccount[]] $ReadAccessOK,
[System.Security.Principal.NTAccount[]] $ReadAccessNeeded
)
if(-not (Test-Path $FilePath -PathType Leaf))
{
Write-host "$FilePath not found" -ForegroundColor Yellow
return
}
Write-host " [*] $FilePath"
$return = Repair-FilePermissionInternal @PSBoundParameters
if($return -contains $true)
{
#Write-host "Re-check the health of file $FilePath"
Repair-FilePermissionInternal @PSBoundParameters
}
}
<#
.Synopsis
Repair-FilePermissionInternal
#>
function Repair-FilePermissionInternal {
[CmdletBinding(SupportsShouldProcess=$true, ConfirmImpact="High")]
param (
[parameter(Mandatory=$true, Position = 0)]
[ValidateNotNullOrEmpty()]
[string]$FilePath,
[ValidateNotNull()]
[System.Security.Principal.NTAccount[]] $Owners = $currentUser,
[System.Security.Principal.NTAccount[]] $AnyAccessOK,
[System.Security.Principal.NTAccount[]] $ReadAccessOK,
[System.Security.Principal.NTAccount[]] $ReadAccessNeeded
)
$acl = Get-Acl $FilePath
$needChange = $false
$health = $true
$paras = @{}
$PSBoundParameters.GetEnumerator() | % { if((-not $_.key.Contains("Owners")) -and (-not $_.key.Contains("Access"))) { $paras.Add($_.key,$_.Value) } }
$validOwner = $owners | ? { $_.equals([System.Security.Principal.NTAccount]$acl.owner)}
if($validOwner -eq $null)
{
$caption = "Current owner: '$($acl.Owner)'. '$($Owners[0])' should own '$FilePath'."
$prompt = "Shall I set the file owner?"
$description = "Set '$($Owners[0])' as owner of '$FilePath'."
if($pscmdlet.ShouldProcess($description, $prompt, $caption))
{
Enable-Privilege SeRestorePrivilege | out-null
$acl.SetOwner($Owners[0])
Set-Acl -Path $FilePath -AclObject $acl -ErrorVariable e -Confirm:$false
if($e)
{
Write-Warning "Set owner failed with error: $($e[0].ToString())."
}
else
{
Write-Host "'$($Owners[0])' now owns '$FilePath'. " -ForegroundColor Green
}
}
else
{
$health = $false
if(-not $PSBoundParameters.ContainsKey("WhatIf"))
{
Write-Host "The owner is still set to '$($acl.Owner)'." -ForegroundColor Yellow
}
}
}
$ReadAccessPerm = ([System.UInt32] [System.Security.AccessControl.FileSystemRights]::Read.value__) -bor `
([System.UInt32] [System.Security.AccessControl.FileSystemRights]::Synchronize.value__)
#system and admin groups can have any access to the file; plus the account in the AnyAccessOK list
$realAnyAccessOKList = $AnyAccessOK + @($systemAccount, $adminsAccount)
#if accounts in the ReadAccessNeeded already part of dacl, they are okay; need to make sure they have read access only
$realReadAcessOKList = $ReadAccessOK + $ReadAccessNeeded
#this is orginal list requested by the user, the account will be removed from the list if they already part of the dacl
$realReadAccessNeeded = $ReadAccessNeeded
#'APPLICATION PACKAGE AUTHORITY\ALL RESTRICTED APPLICATION PACKAGES'- can't translate fully qualified name. it is a win32 API bug.
#'ALL APPLICATION PACKAGES' exists only on Win2k12 and Win2k16 and 'ALL RESTRICTED APPLICATION PACKAGES' exists only in Win2k16
$specialIdRefs = "ALL APPLICATION PACKAGES","ALL RESTRICTED APPLICATION PACKAGES"
foreach($a in $acl.Access)
{
if($realAnyAccessOKList -and (($realAnyAccessOKList | ? { $_.equals($a.IdentityReference)}) -ne $null))
{
#ignore those accounts listed in the AnyAccessOK list.
}
#If everyone is in the ReadAccessOK list, any user can have read access;
# below block make sure they are granted Read access only
elseif($realReadAcessOKList -and ((($realReadAcessOKList | ? { $_.Equals($everyone)}) -ne $null) -or `
(($realReadAcessOKList | ? { $_.equals($a.IdentityReference)}) -ne $null)))
{
if($realReadAccessNeeded -and ($a.IdentityReference.Equals($everyone)))
{
$realReadAccessNeeded=@()
}
elseif($realReadAccessNeeded)
{
$realReadAccessNeeded = $realReadAccessNeeded | ? { -not $_.Equals($a.IdentityReference) }
}
if (-not ($a.AccessControlType.Equals([System.Security.AccessControl.AccessControlType]::Allow)) -or `
(-not (([System.UInt32]$a.FileSystemRights.value__) -band (-bnot $ReadAccessPerm))))
{
continue;
}
if($a.IsInherited)
{
if($needChange)
{
Enable-Privilege SeRestorePrivilege | out-null
Set-Acl -Path $FilePath -AclObject $acl -ErrorVariable e -Confirm:$false
if($e)
{
Write-Warning "Repair permission failed with error: $($e[0].ToString())."
}
}
return Remove-RuleProtection @paras
}
$caption = "'$($a.IdentityReference)' has the following access to '$FilePath': '$($a.FileSystemRights)'."
$prompt = "Shall I make it Read only?"
$description = "Set'$($a.IdentityReference)' Read access only to '$FilePath'. "
if($pscmdlet.ShouldProcess($description, $prompt, $caption))
{
$needChange = $true
$idRefShortValue = ($a.IdentityReference.Value).split('\')[-1]
if ($specialIdRefs -icontains $idRefShortValue )
{
$ruleIdentity = Get-UserSID -User (New-Object Security.Principal.NTAccount $idRefShortValue)
if($ruleIdentity)
{
$ace = New-Object System.Security.AccessControl.FileSystemAccessRule `
($ruleIdentity, "Read", "None", "None", "Allow")
}
else
{
Write-Warning "Can't translate '$idRefShortValue'. "
continue
}
}
else
{
$ace = New-Object System.Security.AccessControl.FileSystemAccessRule `
($a.IdentityReference, "Read", "None", "None", "Allow")
}
$acl.SetAccessRule($ace)
Write-Host "'$($a.IdentityReference)' now has Read access to '$FilePath'. " -ForegroundColor Green
}
else
{
$health = $false
if(-not $PSBoundParameters.ContainsKey("WhatIf"))
{
Write-Host "'$($a.IdentityReference)' still has these access to '$FilePath': '$($a.FileSystemRights)'." -ForegroundColor Yellow
}
}
}
#other than AnyAccessOK and ReadAccessOK list, if any other account is allowed, they should be removed from the dacl
elseif($a.AccessControlType.Equals([System.Security.AccessControl.AccessControlType]::Allow))
{
$caption = "'$($a.IdentityReference)' should not have access to '$FilePath'."
if($a.IsInherited)
{
if($needChange)
{
Enable-Privilege SeRestorePrivilege | out-null
Set-Acl -Path $FilePath -AclObject $acl -ErrorVariable e -Confirm:$false
if($e)
{
Write-Warning "Repair permission failed with error: $($e[0].ToString())."
}
}
return Remove-RuleProtection @paras
}
$prompt = "Shall I remove this access?"
$description = "Remove access rule of '$($a.IdentityReference)' from '$FilePath'."
if($pscmdlet.ShouldProcess($description, $prompt, "$caption."))
{
$needChange = $true
$ace = $a
$idRefShortValue = ($a.IdentityReference.Value).split('\')[-1]
if ($specialIdRefs -icontains $idRefShortValue)
{
$ruleIdentity = Get-UserSID -User (New-Object Security.Principal.NTAccount $idRefShortValue)
if($ruleIdentity)
{
$ace = New-Object System.Security.AccessControl.FileSystemAccessRule `
($ruleIdentity, $a.FileSystemRights, $a.InheritanceFlags, $a.PropagationFlags, $a.AccessControlType)
}
else
{
Write-Warning "Can't translate '$idRefShortValue'. "
continue
}
}
if(-not ($acl.RemoveAccessRule($ace)))
{
Write-Warning "Failed to remove access of '$($a.IdentityReference)' from '$FilePath'."
}
else
{
Write-Host "'$($a.IdentityReference)' has no more access to '$FilePath'." -ForegroundColor Green
}
}
else
{
$health = $false
if(-not $PSBoundParameters.ContainsKey("WhatIf"))
{
Write-Host "'$($a.IdentityReference)' still has access to '$FilePath'." -ForegroundColor Yellow
}
}
}
}
#This is the real account list we need to add read access to the file
if($realReadAccessNeeded)
{
$realReadAccessNeeded | % {
if((Get-UserSID -User $_) -eq $null)
{
Write-Warning "'$_' needs Read access to '$FilePath', but it can't be translated on the machine."
}
else
{
$caption = "'$_' needs Read access to '$FilePath'."
$prompt = "Shall I make the above change?"
$description = "Set '$_' Read only access to '$FilePath'. "
if($pscmdlet.ShouldProcess($description, $prompt, $caption))
{
$needChange = $true
$ace = New-Object System.Security.AccessControl.FileSystemAccessRule `
($_, "Read", "None", "None", "Allow")
$acl.AddAccessRule($ace)
Write-Host "'$_' now has Read access to '$FilePath'." -ForegroundColor Green
}
else
{
$health = $false
if(-not $PSBoundParameters.ContainsKey("WhatIf"))
{
Write-Host "'$_' does not have Read access to '$FilePath'." -ForegroundColor Yellow
}
}
}
}
}
if($needChange)
{
Enable-Privilege SeRestorePrivilege | out-null
Set-Acl -Path $FilePath -AclObject $acl -ErrorVariable e -Confirm:$false
if($e)
{
Write-Warning "Repair permission failed with error: $($e[0].ToString())."
}
}
if($health)
{
if ($needChange)
{
Write-Host " Repaired permissions" -ForegroundColor Yellow
}
else
{
Write-Host " looks good" -ForegroundColor Green
}
}
Write-host " "
}
<#
.Synopsis
Remove-RuleProtection
#>
function Remove-RuleProtection
{
[CmdletBinding(SupportsShouldProcess=$true, ConfirmImpact="High")]
param (
[parameter(Mandatory=$true)]
[string]$FilePath
)
$message = "Need to remove the inheritance before repair the rules."
$prompt = "Shall I remove the inheritace?"
$description = "Remove inheritance of '$FilePath'."
if($pscmdlet.ShouldProcess($description, $prompt, $message))
{
$acl = Get-acl -Path $FilePath
$acl.SetAccessRuleProtection($True, $True)
Enable-Privilege SeRestorePrivilege | out-null
Set-Acl -Path $FilePath -AclObject $acl -ErrorVariable e -Confirm:$false
if($e)
{
Write-Warning "Remove-RuleProtection failed with error: $($e[0].ToString())."
}
Write-Host "Inheritance is removed from '$FilePath'." -ForegroundColor Green
return $true
}
elseif(-not $PSBoundParameters.ContainsKey("WhatIf"))
{
Write-Host "inheritance is not removed from '$FilePath'. Skip Checking FilePath." -ForegroundColor Yellow
return $false
}
}
<#
.Synopsis
Get-UserAccount
#>
function Get-UserAccount
{
param
( [parameter(Mandatory=$true)]
[string]$UserSid
)
try
{
$objSID = New-Object System.Security.Principal.SecurityIdentifier($UserSid)
$objUser = $objSID.Translate( [System.Security.Principal.NTAccount])
$objUser
}
catch {
}
}
<#
.Synopsis
Get-UserSID
#>
function Get-UserSID
{
param ([System.Security.Principal.NTAccount]$User)
try
{
$User.Translate([System.Security.Principal.SecurityIdentifier])
}
catch {
}
}
function Enable-Privilege {
param(
#The privilege to adjust. This set is taken from
#http://msdn.microsoft.com/en-us/library/bb530716(VS.85).aspx
[ValidateSet(
"SeAssignPrimaryTokenPrivilege", "SeAuditPrivilege", "SeBackupPrivilege",
"SeChangeNotifyPrivilege", "SeCreateGlobalPrivilege", "SeCreatePagefilePrivilege",
"SeCreatePermanentPrivilege", "SeCreateSymbolicLinkPrivilege", "SeCreateTokenPrivilege",
"SeDebugPrivilege", "SeEnableDelegationPrivilege", "SeImpersonatePrivilege", "SeIncreaseBasePriorityPrivilege",
"SeIncreaseQuotaPrivilege", "SeIncreaseWorkingSetPrivilege", "SeLoadDriverPrivilege",
"SeLockMemoryPrivilege", "SeMachineAccountPrivilege", "SeManageVolumePrivilege",
"SeProfileSingleProcessPrivilege", "SeRelabelPrivilege", "SeRemoteShutdownPrivilege",
"SeRestorePrivilege", "SeSecurityPrivilege", "SeShutdownPrivilege", "SeSyncAgentPrivilege",
"SeSystemEnvironmentPrivilege", "SeSystemProfilePrivilege", "SeSystemtimePrivilege",
"SeTakeOwnershipPrivilege", "SeTcbPrivilege", "SeTimeZonePrivilege", "SeTrustedCredManAccessPrivilege",
"SeUndockPrivilege", "SeUnsolicitedInputPrivilege")]
$Privilege,
# Switch to disable the privilege, rather than enable it.
[Switch] $Disable
)
$type[0]::EnablePrivilege($Privilege, $Disable)
}
Export-ModuleMember -Function Repair-FilePermission, Repair-SshdConfigPermission, Repair-SshdHostKeyPermission, Repair-AuthorizedKeyPermission, Repair-UserKeyPermission, Repair-UserSshConfigPermission
tools\VERIFICATION.txt
VERIFICATION.txt is intended to assist the Chocolatey moderators and community
in verifying that this package's contents are trustworthy.
To verify:
1. Download https://github.com/PowerShell/Win32-OpenSSH/releases/download/5_30_2016/OpenSSH-Win64.zip
2. Compare OpenSSH-Win64.zip hash with bundled OpenSSH-Win64.zip hash.
3. Download https://github.com/PowerShell/Win32-OpenSSH/releases/download/5_30_2016/OpenSSH-Win32.zip
4. Compare OpenSSH-Win64.zip hash with bundled OpenSSH-Win32.zip hash.
Virus Scan Results
Log in or click on link to see number of positives.
- 7z.dll (7f47382791a5) - ## / 72
- 7z.exe (bb783a594067) - ## / 69
- ntrights.exe (f46baa1b6227) - ## / 68
- OpenSSH-Win32.zip (a467c502688f) - ## / 59
- OpenSSH-Win64.zip (7680788b3cdb) - ## / 58
- scp.exe (93ec5edb7e82) - ## / 62
- sftp-server.exe (540e0a6016bd) - ## / 61
- sftp.exe (d45b4ec90c6e) - ## / 62
- ssh-add.exe (b3aa9670c47d) - ## / 61
- ssh-agent.exe (564141d9087c) - ## / 61
- ssh-keygen.exe (6f8230fa3d20) - ## / 62
- ssh-keyscan.exe (3aec6cfc20a8) - ## / 62
- ssh-shellhost.exe (0334896e7068) - ## / 61
- ssh.exe (68706d761855) - ## / 62
- sshd.exe (b147e7c55419) - ## / 61
- openssh.0.0.15.20170613.nupkg (1a2634cb6d2a) - ## / 58
In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).
Chocolatey Pro provides runtime protection from possible malware.
Version History
Copyright
Microsoft
Release Notes
Product release notes: https://github.com/PowerShell/Win32-OpenSSH/releases/tag/v0.0.15.0
Release Notes for Chocolatey Packaging:
0.0.15.20170613
- Fixed problem for issue #35 (error with "$RunningOnNano not found").
- /DeleteConfigAndServerKeys now works.
0.0.15.20170611
- Sets permissions for user "NT SERVICE\sshd" to write to [sshfolder]\Logs
0.0.15.0
- Calls utility script FixUserFilePermissions.ps1 (included with OpenSSH) to align setup / migrate
permissions to v.0.0.15.0 standard. Permissions are reasserted at every install / upgrade.
- A chocolatey uninstall that specifies "/DeleteConfigAndServerKeys" will fail. This is only ever used
for a completely clean uninstall - not using it means that the ssh_conf and the server key files will
remain in the openssh install folder and will need to be removed manually after taking ownership of the files.
- New switch /DisableKeyPermissionsReset disables this capability if you are managing permissions separately.
0.0.14.0
- by default sets a machine environment variable TERM=xterm, customize with /TERM switch
- updated path setting code to not make unnecessary path alterations
0.0.12.0
- ssh-lsa.dll is no longer needed and no longer configured (switch /ReleaseSSHLSAForUpgrade is ignored)
- if ssh-lsa.dll is found during upgrade a delete attempt is made - if unsuccessful (file locked), ssh-lsa.dll
will be deconfigured as an authentication package and it will be delete on the next upgrade.
0.0.11.0
- /ReleaseSSHLSAForUpgrade - switch that de-configures ssh-lsa.dll in preparation for updating it after a reboot and forced reinstall (and another reboot). See: https://github.com/DarwinJS/ChocoPackages/blob/master/openssh/readme.md
- Set-SSHKeyPermissions.ps1 - new utility for setting permissions on all existing user's authorized_keys files is placed in SSHD binaries folder (on path)
- Calls Set-SSHKeyPermissions.ps1 during install to ensure existing keys are compliant with security updates in SSH 0.0.11.0
- Fix - uninstall was not deconfiguring ssh-lsa.dll from load at startup.
- updated barebonesinstaller.ps1 to take all switches chocolatey takes
0.0.10.20170402
- fix to looking versions of installed exes for PSH 2
0.0.10.20170331
- fix to looking versions of installed exes for Nano
0.0.10.20170329
- fixed issue looking up the path of conflicting sshd service (if one exists)
- fixed problem for nano with listing of exe versions introdcued in 0.0.10.0
0.0.10.0
- displays before and after versions of all EXES in SSH install folder and ssh-lsa.dll
- readme updates for barebonesinstaller.ps1 (due to version 0.0.10.0 not sorting properly with previous versions)
- Dockerfile updates (due to version 0.0.10.0 not sorting properly with previous versions)
- Fix for Nano for barebonesinstaller.ps1 calling 7z.exe
0.0.9.20170313 - fix for Win7/Server 2008 + PSH 2 When Installing SSHServerFeature
0.0.9.20170311
- no longer overwrites sshd_conf if it already exists, unless /OverWriteSSHDConf is used
- supports setting SSHD LogLevel during install or upgrade using /SSHLogLevel
- automatically creates "logs" subfolder in install folder so that if logging is enabled
in the config file it starts without requiring a manual folder creation
0.0.9.20170308 - fix to fileinuseutiles.ps1 to not resolve path when target does not exist
0.0.9.20170306 - fix to ensure sshlsa.dll always gets installed when it should (thanks @felfert !)
0.0.9.20170226 - fix to allow barebones.ps1 to work on PSH 2 (e.g. Server 2008 R2)
0.0.9.20170222 - removal of stray file
0.0.9.0 - fix for problem detecting our install of sshd
Dependencies
This package has no dependencies.
Discussion for the Win32 OpenSSH (Universal Installer) Package
Ground Rules:
- This discussion is only about Win32 OpenSSH (Universal Installer) and the Win32 OpenSSH (Universal Installer) package. If you have feedback for Chocolatey, please contact the Google Group.
- This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
- The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
- Tell us what you love about the package or Win32 OpenSSH (Universal Installer), or tell us what needs improvement.
- Share your experiences with the package, or extra configuration or gotchas that you've found.
- If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.