Step 1: Review Your Packages

Step 2: Choose Your Integration Method

Step 3: Copy Your Script or Download Config

Option 1: Copy Script

Option 2: Download Config

Step 4: Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the packages and push them to a repository
  Download Packages

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the packages:
  Download Packages
- Follow manual internalization instructions
Package Internalizer (C4B)
- Run: (additional options)
- For package and dependencies run:
- Automate package internalization

Step 5: Copy Your Script

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###

#### We initialize a few things that are needed by this script - there are no other requirements.
$ErrorActionPreference = "Stop"

#### Set TLS 1.2 (3072) as that is the minimum required by various up-to-date repositories.
#### Use integers because the enumeration value for TLS 1.2 won't exist
#### in .NET 4.0, even though they are addressable if .NET 4.5+ is
#### installed (.NET 4.5 is an in-place upgrade).
[System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072

#### We use this variable for future REST calls.
$RequestArguments = @{
    UseBasicParsing = $true
}

## 2. TOP LEVEL VARIABLES ##

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# $NugetRepositoryCredential = [PSCredential]::new(
#     "username",
#     ("password" | ConvertTo-SecureString -AsPlainText -Force)
# )
# $RequestArguments.Credential = $NugetRepositoryCredential

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it
$ChocolateyDownloadUrl = "$($NugetRepositoryUrl.TrimEnd('/'))/package/chocolatey.2.4.0.nupkg"

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# $ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

#### Download the Nupkg, appending .zip to the filename to handle archive cmdlet limitations
if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    $TempDirectory = Join-Path $env:Temp "chocolateyInstall"
    if (-not (Test-Path $TempDirectory -PathType Container)) {
        $null = New-Item -Path $TempDirectory -ItemType Directory
    }
    $DownloadedNupkg = Join-Path $TempDirectory "$(Split-Path $ChocolateyDownloadUrl -Leaf).zip"
    Invoke-WebRequest -Uri $ChocolateyDownloadUrl -OutFile $DownloadedNupkg @RequestArguments

    #### Extract the Nupkg, and run the chocolateyInstall script
    if (Get-Command Microsoft.PowerShell.Archive\Expand-Archive -ErrorAction SilentlyContinue) {
        Microsoft.PowerShell.Archive\Expand-Archive -Path $DownloadedNupkg -DestinationPath $TempDirectory -Force
    } else {
        # PowerShell versions <4.0 do not have this function available
        try {
            $shellApplication = New-Object -ComObject Shell.Application
            $zipPackage = $shellApplication.NameSpace($DownloadedNupkg)
            $destinationFolder = $shellApplication.NameSpace($TempDirectory)
            $destinationFolder.CopyHere($zipPackage.Items(), 0x10)
        } catch {
            Write-Warning "Unable to unzip package using built-in compression."
            throw $_
        }
    }

    & $(Join-Path $TempDirectory "tools\chocolateyInstall.ps1")
}

if (-not (Get-Command choco.exe -ErrorAction SilentlyContinue)) {
    refreshenv
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# choco feature enable -n useFipsCompliantChecksums

### b. Apply Recommended Configuration ###
#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
choco config set --name cacheLocation --value C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
choco config set --name commandExecutionTimeoutSeconds --value 14400

#### Turn off download progress when running choco through integrations
choco feature disable --name showDownloadProgress

### c. Sources ###
#### Remove the default community package repository source
choco source list --limitoutput | ConvertFrom-Csv -Header 'Name', 'Location' -Delimiter '|' | ForEach-Object {
    if ($_.Location -eq 'https://community.chocolatey.org/api/v2/') {
        choco source remove -n $_.Name
    }
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
if ($NugetRepositoryCredential) {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --user $NugetRepositoryCredential.UserName --password $NugetRepositoryCredential.GetNetworkCredential().Password --priority 1
} else {
    choco source add --name ChocolateyInternal --source $NugetRepositoryUrl --priority 1
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
choco upgrade chocolatey --confirm

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
choco install chocolatey-license --source $NugetRepositoryUrl --confirm

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco source disable --name chocolatey.licensed
} else {
    Write-Warning "Not disabling 'chocolatey.licensed' feed, as Chocolatey-License has not been installed."
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
if ("chocolatey-license" -in (choco list --localonly --limitoutput | ConvertFrom-Csv -Header "Name" -Delimiter "|").Name) {
    choco install chocolatey.extension --source $NugetRepositoryUrl --confirm
} else {
    Write-Warning "Not installing 'chocolatey.extension', as Chocolatey-License has not been installed."
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
choco feature disable --name showNonElevatedWarnings
choco feature enable --name useBackgroundService
choco feature enable --name useBackgroundServiceWithNonAdministratorsOnly
choco feature enable --name allowBackgroundServiceUninstallsFromUserInstallsOnly
choco config set --name allowedBackgroundServiceCommands --value "install,upgrade,uninstall"

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if ($ChocolateyCentralManagementUrl) {
    choco install chocolatey-agent --source $NugetRepositoryUrl --confirm
    choco config set --name CentralManagementServiceUrl --value $ChocolateyCentralManagementUrl
    if ($ChocolateyCentralManagementClientSalt) {
        choco config set --name centralManagementClientCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementClientSalt
    }
    if ($ChocolateyCentralManagementServiceSalt) {
        choco config set --name centralManagementServiceCommunicationSaltAdditivePassword --value $ChocolateyCentralManagementServiceSalt
    }
    choco feature enable --name useChocolateyCentralManagement
    choco feature enable --name useChocolateyCentralManagementDeployments
}

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. chocolatey.chocolatey
##### You will require the chocolatey.chocolatey collection to be installed
##### on all machines using this playbook.
##### Please see https://github.com/chocolatey/chocolatey-ansible/#installing-the-collection-from-ansible-galaxy

- name: Install and Configure Chocolatey
  hosts: all

## 2. TOP LEVEL VARIABLES ##
  vars:

### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
    nuget_repository_url: INTERNAL REPO URL

### b. Internal Repository Credential ###
#### If required, add the repository access credential here and
#### uncomment lines with source_username and source_password below
#    nuget_repository_username: username
#    nuget_repository_password: password

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#    chocolatey_central_management_url: https://chocolatey-central-management:24020/ChocolateyManagementService

#### ii. If using a Client Salt, add it here
#    chocolatey_central_management_client_salt: clientsalt

#### iii. If using a Service Salt, add it here
#    chocolatey_central_management_service_salt: servicesalt

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository

  tasks:
  - name: Install chocolatey
    win_chocolatey:
      name: chocolatey
      source: ""{{ nuget_repository_url }}""
      # source_username: ""{{ nuget_repository_username }}""
      # source_password: ""{{ nuget_repository_password }}""

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#   - name: Enable FIPS compliance
#     win_chocolatey_feature:
#       name: useFipsCompliantChecksums
#       state: enabled

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
  - name: Set the cache location
    win_chocolatey_config:
      name: cacheLocation
      state: present
      value: C:\ProgramData\chocolatey\cache

#### Increase timeout to at least 4 hours
  - name: Set the command execution timeout
    win_chocolatey_config:
      name: commandExecutionTimeoutSeconds
      state: present
      value: 14400

#### Turn off download progress when running choco through integrations
  - name: Disable showing download progress
    win_chocolatey_feature:
      name: showDownloadProgress
      state: disabled

### c. Sources ###
#### Remove the default community package repository source
  - name: Remove Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey
      state: absent

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here
#### NOTE: This EXAMPLE may require changes
  - name: Add Internal Repository
    win_chocolatey_source:
      name: ChocolateyInternal
      state: present
      source: {{ nuget_repository_url }}
      # source_username: {{ nuget_repository_username }}
      # source_password: {{ nuget_repository_password }}
      priority: 1

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
  - name: Upgrade Chocolatey
    win_chocolatey:
      name: chocolatey
      state: latest

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.
### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
  - name: Install Chocolatey License
    win_chocolatey:
      name: chocolatey-license
      source: ChocolateyInternal
      state: latest

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
  - name: Disable Chocolatey Community Repository
    win_chocolatey_source:
      name: chocolatey.licensed
      state: disabled

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
  - name: Install Chocolatey Extension
    win_chocolatey:
      name: chocolatey.extension
      source: ChocolateyInternal
      state: latest

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
  - name: Hide not-elevated warnings
    win_chocolatey_feature:
      name: showNonElevatedWarnings
      state: disabled

  - name: Use background mode for self-service
    win_chocolatey_feature:
      name: useBackgroundService
      state: enabled

  - name: Use background service for non-admins
    win_chocolatey_feature:
      name: useBackgroundServiceWithNonAdministratorsOnly
      state: enabled

  - name: Allow background uninstallation for user installs
    win_chocolatey_feature:
      name: allowBackgroundServiceUninstallsFromUserInstallsOnly
      state: enabled

  - name: Set allowed background service commands
    win_chocolatey_config:
      name: backgroundServiceAllowedCommands
      state: present
      value: install,upgrade,uninstall

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
  - name: Install Chocolatey Agent
    when: chocolatey_central_management_url is defined
    win_chocolatey:
      name: chocolatey-agent
      source: ChocolateyInternal
      state: latest

  - name: Set the Central Management Service URL
    when: chocolatey_central_management_url is defined
    win_chocolatey_config:
      name: CentralManagementServiceUrl
      state: present
      value: {{ chocolatey_central_management_url }}

  - name: Set the Central Management Client Salt
    when: chocolatey_central_management_client_salt is defined
    win_chocolatey_config:
      name: centralManagementClientCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_client_salt }}

  - name: Set the Central Management Service Salt
    when: chocolatey_central_management_service_salt is defined
    win_chocolatey_config:
      name: centralManagementServiceCommunicationSaltAdditivePassword
      state: present
      value: {{ chocolatey_central_management_service_salt }}

  - name: Use Central Management
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagement
      state: enabled

  - name: Use Central Management Deployments
    when: chocolatey_central_management_url is defined
    win_chocolatey_feature:
      name: useChocolateyCentralManagementDeployments
      state: enabled

See docs at https://docs.chef.io/resource_chocolatey_package.html.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### The Chocolatey resources are available with any recent version of Chef.
#### We utilise the Chocolatey recipe to install the Chocolatey binaries.
include_recipe "chocolatey"

## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
NugetRepositoryUrl = "INTERNAL REPO URL"

### b. Internal Repository Credential ###
#### If required, add the repository access credential here
# NugetRepositoryUsername = "username"
# NugetRepositoryPassword = "password"

### c. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
ChocolateyNupkgUrl = "INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg",

### d. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService"

#### ii. If using a Client Salt, add it here
# ChocolateyCentralManagementClientSalt = "clientsalt"

#### iii. If using a Service Salt, add it here
# ChocolateyCentralManagementServiceSalt = "servicesalt"

## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
node['chocolatey']['install vars'] = {
  'chocolateyDownloadUrl' => "#{ChocolateyNupkgUrl}",
}

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
# chocolatey_feature 'useFipsCompliantChecksums' do
#   action :enable
# end

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolatey_config 'cacheLocation' do
  value 'C:\ProgramData\chocolatey\cache'
end

#### Increase timeout to at least 4 hours
chocolatey_config 'commandExecutionTimeoutSeconds' do
  value '14400'
end

#### Turn off download progress when running choco through integrations
chocolatey_feature 'showDownloadProgress' do
  action :disable
end

### c. Sources ###
#### Remove the default community package repository source
chocolatey_source 'chocolatey' do
  action :remove
end

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE may require changes
chocolatey_source 'ChocolateyInternal' do
  source "#{NugetRepositoryUrl}"
  priority 1
  action   :add
end

execute 'ChocolateyInternal' do
  command "choco source add --name ChocolateyInternal -s #{NugetRepositoryUrl} -u=#{NugetRepositoryUsername} -p=#{NugetRepositoryPassword} --priority=1"
  only_if { NugetRepositoryUsername != nil || NugetRepositoryPassword != nil }
end

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
chocolatey_package 'chocolatey' do
  action :upgrade
  source "#{NugetRepositoryUrl}"
end

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
chocolatey_package 'chocolatey-license' do
  action :install
  source "#{NugetRepositoryUrl}"
end

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
chocolatey_source 'chocolatey.licensed' do
  action            :disable
end

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
chocolatey_package 'chocolatey.extention' do
  action     install
  source     "#{NugetRepositoryUrl}"
end

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolatey_feature 'showNonElevatedWarnings' do
  action :disable
end

chocolatey_feature 'useBackgroundService' do
  action :enable
end

chocolatey_feature 'useBackgroundServiceWithNonAdministratorsOnly' do
  action :enable
end

chocolatey_feature 'allowBackgroundServiceUninstallsFromUserInstallsOnly' do
  action :enable
end

chocolatey_config 'backgroundServiceAllowedCommands' do
  value 'install,upgrade,uninstall'
end

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
chocolatey_package 'chocolatey-agent' do
  action     install
  source     "#{NugetRepositoryUrl}"
  # user       "#{NugetRepositoryUsername}"
  # password   "#{NugetRepositoryPassword}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'CentralManagementServiceUrl' do
  value  "#{ChocolateyCentralManagementUrl}"
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_config 'centralManagementClientCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementClientSalt}"
  only_if { ChocolateyCentralManagementClientSalt != nil }
end

chocolatey_config 'centralManagementServiceCommunicationSaltAdditivePassword' do
  value   "#{ChocolateyCentralManagementServiceSalt}"
  only_if { ChocolateyCentralManagementServiceSalt != nil }
end

chocolatey_feature 'useChocolateyCentralManagement' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

chocolatey_feature 'useChocolateyCentralManagementDeployments' do
  action :enable
  only_if { ChocolateyCentralManagementUrl != nil }
end

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.

If Applicable - Chocolatey Configuration/Installation


#requires -Modules cChoco
## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires chocolatey\cChoco DSC module to be installed on the machine compiling the DSC manifest
#### NOTE: This will need to be installed before running the DSC portion of this script
if (-not (Get-Module cChoco -ListAvailable)) {
    $null = Install-PackageProvider -Name NuGet -MinimumVersion 2.8.5.201 -Force
    if (($PSGallery = Get-PSRepository -Name PSGallery).InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy Trusted
    }
    Install-Module -Name cChoco
    if ($PSGallery.InstallationPolicy -ne "Trusted") {
        Set-PSRepository -Name PSGallery -InstallationPolicy $PSGallery.InstallationPolicy
    }
}

#### ii. Requires a hosted copy of the install.ps1 script
##### This should be available to download without authentication.
##### The original script can be found here: https://community.chocolatey.org/install.ps1

Configuration ChocolateyConfig {
## 2. TOP LEVEL VARIABLES ##
    param(
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
        $NugetRepositoryUrl      = "INTERNAL REPO URL",

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
        $ChocolateyNupkgUrl      = "INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg",

### c. Internal Repository Credential ###
#### If required, add the repository access credential here
#        $NugetRepositoryCredential = [PSCredential]::new(
#            "username",
#            ("password" | ConvertTo-SecureString -AsPlainText -Force)
#        ),

### d. Install.ps1 URL
#### The path to the hosted install script:
        $ChocolateyInstallPs1Url = "https://community.chocolatey.org/install.ps1"

### e. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
#        $ChocolateyCentralManagementUrl = "https://chocolatey-central-management:24020/ChocolateyManagementService",

#### ii. If using a Client Salt, add it here
#        $ChocolateyCentralManagementClientSalt = "clientsalt",

#### iii. If using a Service Salt, add it here
#        $ChocolateyCentralManagementServiceSalt = "servicesalt"
    )
    Import-DscResource -ModuleName PSDesiredStateConfiguration
    Import-DscResource -ModuleName cChoco

    Node 'localhost' {
## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
        Environment chocoDownloadUrl {
            Name  = "chocolateyDownloadUrl"
            Value = $ChocolateyNupkgUrl
        }

        cChocoInstaller installChocolatey {
            DependsOn = "[Environment]chocoDownloadUrl"
            InstallDir = Join-Path $env:ProgramData "chocolatey"
            ChocoInstallScriptUrl = $ChocolateyInstallPs1Url
        }

## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations
#        cChocoFeature featureFipsCompliance {
#            FeatureName = "useFipsCompliantChecksums"
#        }

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
        cChocoConfig cacheLocation {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "cacheLocation"
            Value      = "C:\ProgramData\chocolatey\cache"
        }

#### Increase timeout to at least 4 hours
        cChocoConfig commandExecutionTimeoutSeconds {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            ConfigName = "commandExecutionTimeoutSeconds"
            Value      = 14400
        }

#### Turn off download progress when running choco through integrations
        cChocoFeature showDownloadProgress {
            DependsOn   = "[cChocoInstaller]installChocolatey"
            FeatureName = "showDownloadProgress"
            Ensure      = "Absent"
        }

### c. Sources ###
#### Remove the default community package repository source
        cChocoSource removeCommunityRepository {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name       = "chocolatey"
            Ensure     = "Absent"
        }

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here.
#### NOTE: This EXAMPLE may require changes
        cChocoSource addInternalSource {
            DependsOn  = "[cChocoInstaller]installChocolatey"
            Name        = "ChocolateyInternal"
            Source      = $NugetRepositoryUrl
            Credentials = $NugetRepositoryCredential
            Priority    = 1
        }

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/
        cChocoPackageInstaller updateChocolatey {
            DependsOn   = "[cChocoSource]addInternalSource", "[cChocoSource]removeCommunityRepository"
            Name        = "chocolatey"
            AutoUpgrade = $true
        }

## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/how-tos/setup-offline-installation#exercise-4-create-a-package-for-the-license
        cChocoPackageInstaller chocolateyLicense {
            DependsOn = "[cChocoPackageInstaller]updateChocolatey"
            Name      = "chocolatey-license"
        }

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
        Script disableLicensedSource {
            DependsOn  = "[cChocoPackageInstaller]chocolateyLicense"
            GetScript  = {
                $Source = choco source list --limitoutput | `
                    ConvertFrom-Csv -Delimiter '|' -Header Name, Source, Disabled | `
                    Where-Object Name -eq "chocolatey.licensed"

                return @{
                    Result = if ($Source) {
                        [bool]::Parse($Source.Disabled)
                    } else {
                        Write-Warning "Source 'chocolatey.licensed' was not present."
                        $true  # Source does not need disabling
                    }
                }
            }
            SetScript  = {
                $null = choco source disable --name "chocolatey.licensed"
            }
            TestScript = {
                $State = [ScriptBlock]::Create($GetScript).Invoke()
                return $State.Result
            }
        }

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
        cChocoPackageInstaller chocolateyLicensedExtension {
            DependsOn = "[Script]disableLicensedSource"
            Name      = "chocolatey.extension"
        }

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
        cChocoFeature hideElevatedWarnings {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "showNonElevatedWarnings"
            Ensure      = "Absent"
        }

        cChocoFeature useBackgroundService {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundService"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceWithNonAdmins {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "useBackgroundServiceWithNonAdministratorsOnly"
            Ensure      = "Present"
        }

        cChocoFeature useBackgroundServiceUninstallsForUserInstalls {
            DependsOn   = "[cChocoPackageInstaller]chocolateyLicensedExtension"
            FeatureName = "allowBackgroundServiceUninstallsFromUserInstallsOnly"
            Ensure      = "Present"
        }

        cChocoConfig allowedBackgroundServiceCommands {
            DependsOn   = "[cChocoFeature]useBackgroundService"
            ConfigName = "backgroundServiceAllowedCommands"
            Value       = "install,upgrade,uninstall"
        }

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
        if ($ChocolateyCentralManagementUrl) {
            cChocoPackageInstaller chocolateyAgent {
                DependsOn = "[cChocoPackageInstaller]chocolateyLicensedExtension"
                Name      = "chocolatey-agent"
            }

            cChocoConfig centralManagementServiceUrl {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                ConfigName = "CentralManagementServiceUrl"
                Value       = $ChocolateyCentralManagementUrl
            }

            if ($ChocolateyCentralManagementClientSalt) {
                cChocoConfig centralManagementClientSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementClientCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementClientSalt
                }
            }

            if ($ChocolateyCentralManagementServiceSalt) {
                cChocoConfig centralManagementServiceSalt {
                    DependsOn  = "[cChocoPackageInstaller]chocolateyAgent"
                    ConfigName = "centralManagementServiceCommunicationSaltAdditivePassword"
                    Value      = $ChocolateyCentralManagementServiceSalt
                }
            }

            cChocoFeature useCentralManagement {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagement"
                Ensure      = "Present"
            }

            cChocoFeature useCentralManagementDeployments {
                DependsOn   = "[cChocoPackageInstaller]chocolateyAgent"
                FeatureName = "useChocolateyCentralManagementDeployments"
                Ensure      = "Present"
            }
        }
    }
}

# If working this into an existing configuration with a good method for
$ConfigData = @{
    AllNodes = @(
        @{
            NodeName                    = "localhost"
            PSDscAllowPlainTextPassword = $true
        }
    )
}

try {
    Push-Location $env:Temp
    $Config = ChocolateyConfig -ConfigurationData $ConfigData
    Start-DscConfiguration -Path $Config.PSParentPath -Wait -Verbose -Force
} finally {
    Pop-Location
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

If Applicable - Chocolatey Configuration/Installation


## 1. REQUIREMENTS ##
### Here are the requirements necessary to ensure this is successful.

### a. Internal/Private Cloud Repository Set Up ###
#### You'll need an internal/private cloud repository you can use. These are
####  generally really quick to set up and there are quite a few options.
####  Chocolatey Software recommends Nexus, Artifactory Pro, or ProGet as they
####  are repository servers and will give you the ability to manage multiple
####  repositories and types from one server installation.

### b. Download Chocolatey Package and Put on Internal Repository ###
#### You need to have downloaded the Chocolatey package as well.
####  Please see https://chocolatey.org/install#organization

### c. Other Requirements ###
#### i. Requires puppetlabs/chocolatey module
####  See https://forge.puppet.com/puppetlabs/chocolatey


## 2. TOP LEVEL VARIABLES ##
### a. Your internal repository url (the main one). ###
####  Should be similar to what you see when you browse
#### to https://community.chocolatey.org/api/v2/
$_repository_url = 'INTERNAL REPO URL'

### b. Chocolatey nupkg download url ###
#### This url should result in an immediate download when you navigate to it in
#### a web browser
$_choco_download_url = 'INTERNAL REPO URL/package/chocolatey.2.4.0.nupkg'

### c. Chocolatey Central Management (CCM) ###
#### If using CCM to manage Chocolatey, add the following:
#### i. Endpoint URL for CCM
# $_chocolatey_central_management_url = 'https://chocolatey-central-management:24020/ChocolateyManagementService'

#### ii. If using a Client Salt, add it here
# $_chocolatey_central_management_client_salt = "clientsalt"

#### iii. If using a Service Salt, add it here
# $_chocolatey_central_management_service_salt = 'servicesalt'


## 3. ENSURE CHOCOLATEY IS INSTALLED ##
### Ensure Chocolatey is installed from your internal repository
### Note: `chocolatey_download_url is completely different than normal
###  source locations. This is directly to the bare download url for the
###  chocolatey.nupkg, similar to what you see when you browse to
###  https://community.chocolatey.org/api/v2/package/chocolatey
class {'chocolatey':
  chocolatey_download_url => $_choco_download_url,
  use_7zip                => false,
}


## 4. CONFIGURE CHOCOLATEY BASELINE ##
### a. FIPS Feature ###
#### If you need FIPS compliance - make this the first thing you configure
#### before you do any additional configuration or package installations

#chocolateyfeature {'useFipsCompliantChecksums':
#  ensure => enabled,
#}

### b. Apply Recommended Configuration ###

#### Move cache location so Chocolatey is very deterministic about
#### cleaning up temporary data and the location is secured to admins
chocolateyconfig {'cacheLocation':
  value => 'C:\ProgramData\chocolatey\cache',
}

#### Increase timeout to at least 4 hours
chocolateyconfig {'commandExecutionTimeoutSeconds':
  value => '14400',
}

#### Turn off download progress when running choco through integrations
chocolateyfeature {'showDownloadProgress':
  ensure => disabled,
}

### c. Sources ###
#### Remove the default community package repository source
chocolateysource {'chocolatey':
  ensure   => absent,
  location => 'https://community.chocolatey.org/api/v2/',
}

#### Add internal default sources
#### You could have multiple sources here, so we will provide an example
#### of one using the remote repo variable here

#### NOTE: This EXAMPLE requires changes
chocolateysource {'internal_chocolatey':
  ensure             => present,
  location           => $_repository_url,
  priority           => 1,
  username           => 'optional',
  password           => 'optional,not ensured',
  bypass_proxy       => true,
  admin_only         => false,
  allow_self_service => false,
}

### b. Keep Chocolatey Up To Date ###
#### Keep chocolatey up to date based on your internal source
#### You control the upgrades based on when you push an updated version
####  to your internal repository.
#### Note the source here is to the OData feed, similar to what you see
####  when you browse to https://community.chocolatey.org/api/v2/

package {'chocolatey':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}


## 5. ENSURE CHOCOLATEY FOR BUSINESS ##
### If you don't have Chocolatey for Business (C4B), you'll want to remove from here down.

### a. Ensure The License File Is Installed ###
#### Create a license package using script from https://docs.chocolatey.org/en-us/guides/organizations/organizational-deployment-guide#exercise-4-create-a-package-for-the-license

# TODO: Add resource for installing/ensuring the chocolatey-license package
package {'chocolatey-license':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
}

### b. Disable The Licensed Source ###
#### The licensed source cannot be removed, so it must be disabled.
#### This must occur after the license has been set by the license package.
## Disabled sources still need all other attributes until
## https://tickets.puppetlabs.com/browse/MODULES-4449 is resolved.
## Password is necessary with user, but not ensurable, so it should not
## matter what it is set to here. If you ever do get into trouble here,
## the password is your license GUID.
chocolateysource {'chocolatey.licensed':
  ensure   => disabled,
  priority => '10',
  user     => 'customer',
  password => '1234',
  require  => Package['chocolatey-license'],
}

### c. Ensure Chocolatey Licensed Extension ###
#### You will have downloaded the licensed extension to your internal repository
#### as you have disabled the licensed repository in step 5b.

#### Ensure the chocolatey.extension package (aka Chocolatey Licensed Extension)
package {'chocolatey.extension':
  ensure   => latest,
  provider => chocolatey,
  source   => $_repository_url,
  require  => Package['chocolatey-license'],
}

#### The Chocolatey Licensed Extension unlocks all of the following, which also have configuration/feature items available with them. You may want to visit the feature pages to see what you might want to also enable:
#### - Package Builder - https://docs.chocolatey.org/en-us/features/paid/package-builder
#### - Package Internalizer - https://docs.chocolatey.org/en-us/features/paid/package-internalizer
#### - Package Synchronization (3 components) - https://docs.chocolatey.org/en-us/features/paid/package-synchronization
#### - Package Reducer - https://docs.chocolatey.org/en-us/features/paid/package-reducer
#### - Package Audit - https://docs.chocolatey.org/en-us/features/paid/package-audit
#### - Package Throttle - https://docs.chocolatey.org/en-us/features/paid/package-throttle
#### - CDN Cache Access - https://docs.chocolatey.org/en-us/features/paid/private-cdn
#### - Branding - https://docs.chocolatey.org/en-us/features/paid/branding
#### - Self-Service Anywhere (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/self-service-anywhere
#### - Chocolatey Central Management (more components will need to be installed and additional configuration will need to be set) - https://docs.chocolatey.org/en-us/features/paid/chocolatey-central-management
#### - Other - https://docs.chocolatey.org/en-us/features/paid/

### d. Ensure Self-Service Anywhere ###
#### If you have desktop clients where users are not administrators, you may
#### to take advantage of deploying and configuring Self-Service anywhere
chocolateyfeature {'showNonElevatedWarnings':
  ensure => disabled,
}

chocolateyfeature {'useBackgroundService':
  ensure => enabled,
}

chocolateyfeature {'useBackgroundServiceWithNonAdministratorsOnly':
  ensure => enabled,
}

chocolateyfeature {'allowBackgroundServiceUninstallsFromUserInstallsOnly':
  ensure => enabled,
}

chocolateyconfig {'backgroundServiceAllowedCommands':
  value => 'install,upgrade,uninstall',
}

### e. Ensure Chocolatey Central Management ###
#### If you want to manage and report on endpoints, you can set up and configure
### Central Management. There are multiple portions to manage, so you'll see
### a section on agents here along with notes on how to configure the server
### side components.
if $_chocolatey_central_management_url {
  package {'chocolatey-agent':
    ensure   => latest,
    provider => chocolatey,
    source   => $_repository_url,
    require  => Package['chocolatey-license'],
  }

  chocolateyconfig {'CentralManagementServiceUrl':
    value   => $_chocolatey_central_management_url,
  }

  if $_chocolatey_central_management_client_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  if $_chocolatey_central_management_service_salt {
    chocolateyconfig {'centralManagementClientCommunicationSaltAdditivePassword':
      value => $_chocolatey_central_management_client_salt,
    }
  }

  chocolateyfeature {'useChocolateyCentralManagement':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }

  chocolateyfeature {'useChocolateyCentralManagementDeployments':
    ensure  => enabled,
    require => Package['chocolatey-agent'],
  }
}

Need Help? View our docs or file an issue.

There is already a version of this package in your Script Builder

Current Version	New Version

Downloads:

6,459,459

Downloads of v 0.0.9.20170306:

762

Last Update:

07 Mar 2017

Package Maintainer(s):

DarwinJS

Software Author(s):

Microsoft

Tags:

openssh admin

Win32 OpenSSH (Microsoft Port)

This is not the latest version of Win32 OpenSSH (Microsoft Port) available.

0.0.9.20170306 | Updated: 07 Mar 2017

Downloads:

6,459,459

Downloads of v 0.0.9.20170306:

762

Maintainer(s):

DarwinJS

Software Author(s):

Microsoft

Tags:

openssh admin

Win32 OpenSSH (Microsoft Port) 0.0.9.20170306

This is not the latest version of Win32 OpenSSH (Microsoft Port) available.

Legal Disclaimer: Neither this package nor Chocolatey Software, Inc. are affiliated with or endorsed by Microsoft. The inclusion of Microsoft trademark(s), if any, upon this webpage is solely to identify Microsoft goods or services and not for commercial purposes.

Some Checks Have Failed or Are Not Yet Complete

Not All Tests Have Passed

Hide Checks

Validation Testing Passed

Verification Testing Passed

Details

Scan Testing Resulted in Flagged:

This package was submitted (and approved) prior to automated virus scanning integration into the package moderation processs.

We recommend clicking the "Details" link to make your own decision on installing this package.

Details

Learn More

Deployment Method: Individual Install, Upgrade, & Uninstall

To install Win32 OpenSSH (Microsoft Port), run the following command from the command line or from PowerShell:

To upgrade Win32 OpenSSH (Microsoft Port), run the following command from the command line or from PowerShell:

To uninstall Win32 OpenSSH (Microsoft Port), run the following command from the command line or from PowerShell:

NOTE

This applies to both open source and commercial editions of Chocolatey.

1. Enter Your Internal Repository Url

(this should look similar to https://community.chocolatey.org/api/v2/)

2. Setup Your Environment

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

2. Get the package into your environment

Option 1: Cached Package (Unreliable, Requires Internet - Same As Community)

Open Source or Commercial:
- Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://community.chocolatey.org/api/v2/. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
- You can also just download the package and push it to a repository Download

Option 2: Internalized Package (Reliable, Scalable)

Open Source
- Download the package:
  Download
- Follow manual internalization instructions

Package Internalizer (C4B)

Run: (additional options)

choco download openssh --internalize --version=0.0.9.20170306 --source=https://community.chocolatey.org/api/v2/

For package and dependencies run:

choco push --source="'INTERNAL REPO URL'"

Automate package internalization

3. Copy Your Script

choco upgrade openssh -y --source="'INTERNAL REPO URL'" --version="'0.0.9.20170306'" [other options]

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:


choco upgrade openssh -y --source="'INTERNAL REPO URL'" --version="'0.0.9.20170306'" 
$exitCode = $LASTEXITCODE

Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
  Exit 0
}

Exit $exitCode


- name: Install openssh
  win_chocolatey:
    name: openssh
    version: '0.0.9.20170306'
    source: INTERNAL REPO URL
    state: present

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.


chocolatey_package 'openssh' do
  action    :install
  source   'INTERNAL REPO URL'
  version  '0.0.9.20170306'
end

See docs at https://docs.chef.io/resource_chocolatey_package.html.


cChocoPackageInstaller openssh
{
    Name     = "openssh"
    Version  = "0.0.9.20170306"
    Source   = "INTERNAL REPO URL"
}

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.


package { 'openssh':
  ensure   => '0.0.9.20170306',
  provider => 'chocolatey',
  source   => 'INTERNAL REPO URL',
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.

4. If applicable - Chocolatey configuration/installation

See infrastructure management matrix for Chocolatey configuration elements and examples.

Package Approved

This package was approved as a trusted package on 08 Mar 2017.

Description

Open SSH tools for Windows.
This is the Microsoft PowerShell Team's recent port.
Works in all CLIs and does not require .NET.
Includes the following tools:
* ssh.exe
* ssh-add.exe
* ssh-agent.exe
* ssh-keygen.exe
* ssh-keyscan.exe
* ssh-keysign.exe
* ssh-pkcs11-helper.exe
* scp.exe
* sftp.exe
* sshd.exe (server)
* sftp-server.exe

This package performs the following operations that you normally have to hack at until you get what you want:
* Install Appropriate Bitness for the version of Windows
* Install to Program Files (malware protection and following advice of dev team)
* Add SSH location to System PATH
* Optionally install sshd windows service (Requires parameter - see below)
* Optionally install sshd server "key based authentication" (Requires parameter - see below)
* Cleanly uninstall all of the above (removing config files and server keys requires special switch - see below)

The package also attempts to keep you out of trouble when configuring the sshd service:
* Will not install sshd server if an different sshd server is already running
* Will not delete server keys on uninstall or reinstall (unless you override with switch below)
* Will not upgrade or uninstall if the service is running and you did not specify /SSHServerFeature (you forget about the service on a machine where you want to upgrade the client tools)
* If you use the server's Key Based Authentication feature, install and uninstall behave differently to account for the integration of this component

This package supports the following parameters:

-params '"/SSHServerFeature"' (Install and Uninstall)
Also install sshd Windows Service - including opening port 22.
If this parameter is not included on an upgrade or uninstall and
the sshd server is installed - an error is generated. You must
use this switch to indicate you have made preparations for the
sshd service to be interrupted or removed.

-params '"/SSHAgentFeature"'
Installs SSH Agent Service even if SSHD Server is not being installed.
Requires admin rights to configure service.
This option is automatically set when /SSHServerFeature is used.

-params '"/SSHServerFeature /SSHServerPort:3834"'
Allows the setup of the SSH server on an alternate port - sometimes done for security or to avoid conflicts with an existing service on port 22.

RETIRED: -params '"/KeyBasedAuthenticationFeature"'
NO LONGER NECESSARY - KeyBasedAuthentiation is always configured
if the /SSHServerFeature switch is used.

-params '"/SSHServerFeature /DeleteServerKeysAfterInstalled"'
Also install sshd Windows Service - including opening port 22 and
it with Key Based Authentication (reboot required before active)
Server keys are deleted after added to the ssh-agent (you will not have an opportunity to copy them)

-params '"/SSHServerFeature /DeleteConfigAndServerKeys"' (Uninstall)
By default an uninstall does not remove config files nor server keys.

-params '"/UseNTRights"'
By default the install uses PowerShell code that works on operating systems that cannot run the 32-bit ntrights.exe (Nano, Server Core w/out WOW64).
If this code does not work for you, you can use this switch to invoke the 32-bit ntrights.exe
Please be aware that 32-bit ntrights.exe will NOT work on Windows Systems that doe not have WOW64 installed - this would mainly
affect Server Core where this feature is optional and not installed by default and Server Nano where 32-bit is not supported.

Files

tools\7z.dll

md5: 9943B3BCB2CA91CCBEF2D96682CECB79 | sha1: D467F1F7A8407D1650060C8FE3DC6A0CCFF4D409 | sha256: 7F47382791A5264EED7310706E105C1CFA0E727359102F14933D4927BD296640 | sha512: D724BA334CEC2E3D69BBC93FEA635377EDC941962E2FFBE8246C2ADA80D445DEAB7F3BB5A18FCEAE295428C5B47CE42F3CD56F94AB9F170560DDDED167BE2995

tools\7z.exe

md5: 506E5B371882A5A62B669F04CE04DBA8 | sha1: 7447EB123655792FEDE586AD049AC737EFFA9E6C | sha256: BB783A594067DB5CB4E43030D9E6928636555A9CE6AA3533532731975094230A | sha512: 7F367D22B95E14AF8BDA3BE1354A4A54EDFDA283700D086878FEA72B349E64B497F2D241AE31E0B2B0C56957D3A39299E51E09B0D67D2C6201AE20033555212E

tools\7z.exe.ignore

tools\AddAccountToAssignPrimaryToken.ps1

param($accountToAdd)
#written by Ingo Karstein, http://blog.karstein-consulting.com
#  v1.0, 01/03/2014

## <--- Configure here

if( [string]::IsNullOrEmpty($accountToAdd) ) {
	Write-Host "no account specified"
	exit
}

## ---> End of Config

$sidstr = $null
try {
	$ntprincipal = new-object System.Security.Principal.NTAccount "$accountToAdd"
	$sid = $ntprincipal.Translate([System.Security.Principal.SecurityIdentifier])
	$sidstr = $sid.Value.ToString()
} catch {
	$sidstr = $null
}

Write-Host "Account: $($accountToAdd)" -ForegroundColor DarkCyan

if( [string]::IsNullOrEmpty($sidstr) ) {
	Write-Host "Account not found!" -ForegroundColor Red
	exit -1
}

Write-Host "Account SID: $($sidstr)" -ForegroundColor DarkCyan

$tmp = [System.IO.Path]::GetTempFileName()

Write-Host "Export current Local Security Policy" -ForegroundColor DarkCyan
secedit.exe /export /cfg "$($tmp)"

$c = Get-Content -Path $tmp

$currentSetting = ""

foreach($s in $c) {
	if( $s -like "SeAssignPrimaryTokenPrivilege*") {
		$x = $s.split("=",[System.StringSplitOptions]::RemoveEmptyEntries)
		$currentSetting = $x[1].Trim()
	}
}

if( $currentSetting -notlike "*$($sidstr)*" ) {
	Write-Host "Modify Setting ""Replace a process level token""" -ForegroundColor DarkCyan

	if( [string]::IsNullOrEmpty($currentSetting) ) {
		$currentSetting = "*$($sidstr)"
	} else {
		$currentSetting = "*$($sidstr),$($currentSetting)"
	}

	Write-Host "$currentSetting"

	$outfile = @"
[Unicode]
Unicode=yes
[Version]
signature="`$CHICAGO`$"
Revision=1
[Privilege Rights]
SeAssignPrimaryTokenPrivilege = $($currentSetting)
"@

	$tmp2 = [System.IO.Path]::GetTempFileName()


	Write-Host "Import new settings to Local Security Policy" -ForegroundColor DarkCyan
	$outfile | Set-Content -Path $tmp2 -Encoding Unicode -Force

	#notepad.exe $tmp2
	Push-Location (Split-Path $tmp2)

	try {
		secedit.exe /configure /db "secedit.sdb" /cfg "$($tmp2)" /areas USER_RIGHTS
		#write-host "secedit.exe /configure /db ""secedit.sdb"" /cfg ""$($tmp2)"" /areas USER_RIGHTS "
	} finally {
		Pop-Location
	}
} else {
	Write-Host "NO ACTIONS REQUIRED! Account already in ""Replace a process level token""" -ForegroundColor DarkCyan
}

Write-Host "Done." -ForegroundColor DarkCyan

tools\AddAccountToLogonAsAService.ps1

param($accountToAdd)
#written by Ingo Karstein, http://blog.karstein-consulting.com
#  v1.0, 01/03/2014

## <--- Configure here

if( [string]::IsNullOrEmpty($accountToAdd) ) {
	Write-Host "no account specified"
	exit
}

## ---> End of Config

$sidstr = $null
try {
	$ntprincipal = new-object System.Security.Principal.NTAccount "$accountToAdd"
	$sid = $ntprincipal.Translate([System.Security.Principal.SecurityIdentifier])
	$sidstr = $sid.Value.ToString()
} catch {
	$sidstr = $null
}

Write-Host "Account: $($accountToAdd)" -ForegroundColor DarkCyan

if( [string]::IsNullOrEmpty($sidstr) ) {
	Write-Host "Account not found!" -ForegroundColor Red
	exit -1
}

Write-Host "Account SID: $($sidstr)" -ForegroundColor DarkCyan

$tmp = [System.IO.Path]::GetTempFileName()

Write-Host "Export current Local Security Policy" -ForegroundColor DarkCyan
secedit.exe /export /cfg "$($tmp)"

$c = Get-Content -Path $tmp

$currentSetting = ""

foreach($s in $c) {
	if( $s -like "SeServiceLogonRight*") {
		$x = $s.split("=",[System.StringSplitOptions]::RemoveEmptyEntries)
		$currentSetting = $x[1].Trim()
	}
}

if( $currentSetting -notlike "*$($sidstr)*" ) {
	Write-Host "Modify Setting ""Logon as a Service""" -ForegroundColor DarkCyan

	if( [string]::IsNullOrEmpty($currentSetting) ) {
		$currentSetting = "*$($sidstr)"
	} else {
		$currentSetting = "*$($sidstr),$($currentSetting)"
	}

	Write-Host "$currentSetting"

	$outfile = @"
[Unicode]
Unicode=yes
[Version]
signature="`$CHICAGO`$"
Revision=1
[Privilege Rights]
SeServiceLogonRight = $($currentSetting)
"@

	$tmp2 = [System.IO.Path]::GetTempFileName()


	Write-Host "Import new settings to Local Security Policy" -ForegroundColor DarkCyan
	$outfile | Set-Content -Path $tmp2 -Encoding Unicode -Force

	#notepad.exe $tmp2
	Push-Location (Split-Path $tmp2)

	try {
		secedit.exe /configure /db "secedit.sdb" /cfg "$($tmp2)" /areas USER_RIGHTS
		#write-host "secedit.exe /configure /db ""secedit.sdb"" /cfg ""$($tmp2)"" /areas USER_RIGHTS "
	} finally {
		Pop-Location
	}
} else {
	Write-Host "NO ACTIONS REQUIRED! Account already in ""Logon as a Service""" -ForegroundColor DarkCyan
}

Write-Host "Done." -ForegroundColor DarkCyan

tools\barebonesinstaller.ps1

<#
.SYNOPSIS
Enables installing SSH even when your system does not have WOW64 or Chocolatey.
.DESCRIPTION
This script enables installing  SSH even when your system does NOT have:
  [1] Chocolatey installed
  [2] WOW64 installed
  [3] .NET Core (Nano)

The use cases are Server Nano and Server Core without WOW64 installed.

To use barebonesinstaller.ps1, expand the .nupkg that this file is contained in
and then place the \tools folder on the target system.

To push tools folder to Nano use 'Copy-Item -tosession $sessionvariable tools c:\tools -recurse'
.PARAMETER SSHServerFeature
Include SSH Server Feature.
.PARAMETER SSHServerPort
The port that SSHD Server should listen on.
.PARAMETER DeleteServerKeysAfterInstalled
Delete server private keys after they have been secured
.PARAMETER DeleteConfigAndServerKeys
Delete server private keys and configuration upon uninstall.
.PARAMETER Uninstall
Uninstall (default is to install)
.EXAMPLE
.\barebonesinstaller.ps1 -SSHServerFeature
.EXAMPLE
.\barebonesinstaller.ps1 -SSHServerFeature -Uninstall
#>

Param (
  [Parameter(HelpMessage="Include SSH Server Feature.")]
  [switch]$SSHServerFeature,
  [Parameter(HelpMessage="Delete server private keys after they have been secured.")]
  [string]$SSHServerPort='22',
  [Parameter(HelpMessage="Delete server private keys after they have been secured.")]
  [switch]$DeleteServerKeysAfterInstalled,
  [Parameter(HelpMessage="Uninstall instead of Install (install is the default).")]
  [switch]$DeleteConfigAndServerKeys,
  [Parameter(HelpMessage="Delete server private keys and configuration upon uninstall.")]
  [switch]$Uninstall
  )

Write-Output "Configuring on Port $SSHServerPort"

cd "$(Split-Path -parent $MyInvocation.MyCommand.Definition)"

If (!$Uninstall)
{
  . ".\chocolateyinstall.ps1"
}
Else
{
  . ".\chocolateyuninstall.ps1"
}

tools\chocolateyinstall.ps1

$ErrorActionPreference = 'Stop'; # stop on all errors

$ProductName = (Get-ItemProperty -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion' -Name 'ProductName').ProductName
$EditionId = (Get-ItemProperty -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion' -Name 'EditionID').EditionId

Write-Output "Running on: $ProductName, ($EditionId)"

If ($EditionId -ilike '*Nano*')
{$RunningOnNano = $True}

If (Test-Path variable:shimgen)
{$RunningUnderChocolatey = $True}
Else
{  Write-Output "Running Without Chocolatey"}

$toolsDir   = "$(Split-Path -parent $MyInvocation.MyCommand.Definition)"
$OSBits = ([System.IntPtr]::Size * 8) #Get-ProcessorBits

#On 64-bit, always favor 64-bit Program Files no matter what our execution is now (works back past XP / Server 2003)
If ($env:ProgramFiles.contains('x86'))
{
  $PF = $env:ProgramFiles.replace(' (x86)','')
}
Else
{
  $PF = $env:ProgramFiles
}

$filename = "$toolsdir\OpenSSH-Win$($OSBits).zip"
#$TargetFolder = "$PF\OpenSSH"
#$TargetFolderOld = "$PF\OpenSSH-Win$($OSBits)"
$TargetFolder = "$PF\OpenSSH-Win$($OSBits)"
$ExtractFolder = "$env:temp\OpenSSHTemp"

$packageArgs = @{
  packageName   = 'openssh'
  unziplocation = "$ExtractFolder"
  fileType      = 'EXE_MSI_OR_MSU' #only one of these: exe, msi, msu

  checksum      = '59A1A7A0E4664CE16C212452459E2B21522FA46D'
  checksumType  = 'SHA1'
  checksum64    = '46D61364B3B948F3A2B2D204ED8DFADCF687A192'
  checksumType64= 'SHA1'
}

If ($RunningUnderChocolatey)
{
  # Default the values before reading params
  $SSHServerFeature = $false
  $KeyBasedAuthenticationFeature = $false
  $DeleteServerKeysAfterInstalled = $false
  $UseNTRights = $false
  $SSHServerPort = '22'

  $arguments = @{};
  $packageParameters = $env:chocolateyPackageParameters
}

$OpeningMessage = @"

************************************************************************************
This package can install Win32-OpenSSH on Nano and Server Core and Docker Containers
See the following for details:
https://github.com/DarwinJS/ChocoPackages/blob/master/openssh/readme.md
************************************************************************************

"@

Write-Output $OpeningMessage

# Now parse the packageParameters using good old regular expression
if ($packageParameters) {
    $match_pattern = "\/(?<option>([a-zA-Z]+)):(?<value>([`"'])?([a-zA-Z0-9- _\\:\.]+)([`"'])?)|\/(?<option>([a-zA-Z]+))"
    #"
    $option_name = 'option'
    $value_name = 'value'

    if ($packageParameters -match $match_pattern ){
        $results = $packageParameters | Select-String $match_pattern -AllMatches
        $results.matches | % {
          $arguments.Add(
              $_.Groups[$option_name].Value.Trim(),
              $_.Groups[$value_name].Value.Trim())
      }
    }
    else
    {
      throw "Package Parameters were found but were invalid (REGEX Failure)"
    }

    if ($arguments.ContainsKey("SSHAgentFeature")) {
        Write-Host "/SSHAgentFeature was used, including SSH Agent Service."
        $SSHAgentFeature = $true
    }

    if ($arguments.ContainsKey("SSHServerFeature")) {
        Write-Host "/SSHServerFeature was used, including SSH Server Feature."
        $SSHServerFeature = $true
    }

    if ($arguments.ContainsKey("SSHServerPort")) {
        $SSHServerPort = $arguments.Get_Item("SSHServerPort")
        Write-Host "/SSHServerPort was used, attempting to use SSHD listening port $SSHServerPort."
        If (!$SSHServerFeature)
        {
          Write-Host "You forgot to specify /SSHServerFeature with /SSHServerPort, autofixing for you, enabling /SSHServerFeature"
          $SSHServerFeature = $true
        }
    }

    if ($arguments.ContainsKey("UseNTRights")) {
        Write-Host "Using ntrights.exe to set service permissions (will not work, but generate warning if WOW64 is not present on 64-bit machines)"
        $UseNTRights = $true
    }

    if ($arguments.ContainsKey("DeleteServerKeysAfterInstalled")) {
        Write-Host "Deleting server private keys after they have been secured."
        $DeleteServerKeysAfterInstalled = $true
    }

    if ($arguments.ContainsKey("KeyBasedAuthenticationFeature")) {
        Write-Host "Including LSA DLL Feature."
        $KeyBasedAuthenticationFeature = $true
        If (!$SSHServerFeature)
        {
          Write-Warning "KeyBasedAuthenticationFeature was specified, but is only value when SSHServerFeature is specified, ignoring..."
        }
    }

} else {
    Write-Debug "No Package Parameters Passed in";
}

Function CheckServicePath ($ServiceEXE,$FolderToCheck)
{
  #The modern way:
  #Return ([bool]((Get-WmiObject win32_service | ?{$_.Name -ilike "*$ServiceEXE*"} | select -expand PathName) -ilike "*$FolderToCheck*"))
  #The NANO TP5 Compatible Way:
  Return ([bool](@(wmic service | ?{$_ -ilike "*$ServiceEXE*"}) -ilike "*$FolderToCheck*"))
}


If ($SSHServerFeature)
{  #Check if anything is already listening on port $SSHServerPort, which is not a previous version of this software.
  Write-Host "/SSHAgentFeature is also automatically enabled when using /SSHServerFeature."
  $SSHAgentFeature = $true
  $AtLeastOneSSHDPortListenerIsNotUs = $False
  Write-Output "Probing for possible conflicts with SSHD server to be configured on port $SSHServerPort ..."
  . "$toolsdir\Get-NetStat.ps1"
  $procslisteningonRequestedSSHDPort = @(Get-Netstat -GetProcessDetails -FilterOnPort $SSHServerPort)
  If ((checkservicepath 'svchost.exe -k SshBrokerGroup' 'Part of Microsoft SSH Server for Windows') -AND (checkservicepath 'svchost.exe -k SshProxyGroup' 'Part of Microsoft SSH Server for Windows'))
  {
    Write-Warning "  > Detected that Developer Mode SSH is present (Probably due to enabling Windows 10 Developer Mode)"
    $DeveloperModeSSHIsPresent = $True
  }

  If ($procslisteningonRequestedSSHDPort.count -ge 1)
  {
    ForEach ($proconRequestedSSHDPort in $procslisteningonRequestedSSHDPort)
    {
      Write-output "  > Checking $($proconRequestedSSHDPort.Localaddressprocesspath) against path $TargetFolder"
      If ("$($proconRequestedSSHDPort.Localaddressprocesspath)" -ilike "*$TargetFolder*")
      {
        Write-Output "  > Found a previous version of Win32-OpenSSH installed by this package on Port $SSHServerPort."
      }
      Else
      {
        $AtLeastOneSSHDPortListenerIsNotUs = $True
        Write-Warning "  > Found something listening on Port $SSHServerPort that was not installed by this package."
        Write-Warning "      $($proconRequestedSSHDPort.LocalAddressProcessPath) is listening on Port $SSHServerPort"
        $ProcessOccupyingPort = "$($proconRequestedSSHDPort.LocalAddressProcessPath)"
      }
    }
  }

  If ($AtLeastOneSSHDPortListenerIsNotUs)
  {
  $errorMessagePort = @"
"$ProcessOccupyingPort" is listening on port $SSHServerPort and you have not specified a different listening port (list above) using the /SSHServerPort parameter.
Please either deconfigure or deinstall whatever is running on Port $SSHServerPort and try again OR specify a different port for this SSHD Server using the /SSHServerPort package parameter.
If you see the message 'Detected that Developer Mode SSH is present' above, you may be able to simply disable the services 'SSHBroker' and 'SSHProxy'
"@
  Throw $errorMessagePort
  }
}

#$SSHServiceInstanceExistsAndIsOurs = ([bool]((Get-WmiObject win32_service | ?{$_.Name -ilike 'sshd'} | select -expand PathName) -ilike "*$TargetFolder*"))
$SSHServiceInstanceExistsAndIsOurs = CheckServicePath 'sshd.exe' "$TargetFolder"
#$SSHAGENTServiceInstanceExistsAndIsOurs = ([bool]((Get-WmiObject win32_service | ?{$_.Name -ilike 'ssh-agent'} | select -expand PathName) -ilike "*$TargetFolder*"))
$SSHAGENTServiceInstanceExistsAndIsOurs = CheckServicePath 'ssh-agent.exe' "$TargetFolder"

If ($SSHServerFeature -AND (!$SSHServiceInstanceExistsAndIsOurs) -AND ([bool](Get-Service sshd -ErrorAction SilentlyContinue)))
{
  $ExistingSSHDInstancePath = split-path -parent (((wmic service | ?{$_ -ilike '*sshd*'}) -ilike "*$TargetFolder*").split('=')[1].trim())
  #(Get-WmiObject win32_service | ?{$_.Name -ilike 'sshd'} | select -expand PathName)
  Throw "You have requested that the SSHD service be installed, but this system appears to have an instance of an SSHD service configured for another folder ($ExistingSSHDInstancePath).  You can remove the package switch /SSHServerFeature to install just the client tools, or you will need to remove that instance of SSHD to use the one that comes with this package."
}

If ((!$SSHServerFeature) -AND $SSHServiceInstanceExistsAndIsOurs)
{
  Throw "There is a configured instance of the SSHD service, please specify the /SSHServerFeature to confirm it is OK to shutdown and upgrade the SSHD service at this time."
}

If ([bool](get-process ssh -erroraction silentlycontinue | where {$_.Path -ilike "*$TargetFolder*"}))
{
  Throw "It appears you have instances of ssh.exe (client) running from the folder this package installs to, please terminate them and try again."
}

If ($SSHServiceInstanceExistsAndIsOurs -AND ([bool](Get-Service SSHD -ErrorAction SilentlyContinue | where {$_.Status -ieq 'Running'})))
{
    #Shutdown and unregister service for upgrade
    stop-service sshd -Force
    Stop-Service SSH-Agent -Force
    Start-Sleep -seconds 3
    If (([bool](Get-Service SSHD | where {$_.Status -ieq 'Running'})))
    {
      Throw "Could not stop the SSHD service, please stop manually and retry this package."
    }
    If ($SSHAGENTServiceInstanceExistsAndIsOurs)
    {
      stop-service ssh-agent -Force
      Start-Sleep -seconds 3
      If (([bool](Get-Service ssh-agent | where {$_.Status -ieq 'Running'})))
      {
        Throw "Could not stop the ssh-agent service, please stop manually and retry this package."
      }
    }

}

If ($SSHServiceInstanceExistsAndIsOurs)
{
  Write-output "Stopping SSHD Service for upgrade..."
  Stop-Service sshd
  sc.exe delete sshd | out-null
}
If ($SSHAGENTServiceInstanceExistsAndIsOurs)
{
  Write-output "Stopping SSH-Agent Service for upgrade..."
  Stop-Service ssh-agent -erroraction silentlycontinue
  sc.exe delete ssh-agent | out-null
}

If ($OSBits -eq 64)
{
  $SourceZipChecksum = $packageargs.checksum64
  $SourceZipChecksumType = $packageargs.checksumType64
}
Else
{
  $SourceZipChecksum = $packageargs.checksum
  $SourceZipChecksumType = $packageargs.checksumType
}

If ([bool](get-command get-filehash -ea silentlycontinue))
{
  If ((Get-FileHash $filename -Algorithm $SourceZipChecksumType).Hash -eq $SourceZipChecksum)
  {
    Write-Output "Hashes for internal source match"
  }
  Else
  {
    throw "Checksums for internal source do not match - something is wrong."
  }
}
Else
{
  Write-Output "Source files are internal to the package, checksums are not required nor checked."
}

If ($RunningUnderChocolatey)
{
  If (Test-Path $ExtractFolder)
  {
    Remove-Item $ExtractFolder -Recurse -Force
  }
  Get-ChocolateyUnzip "$filename" $ExtractFolder
  Install-ChocolateyPath "$TargetFolder" 'Machine'
}
Else
{
  If (Test-Path "$toolsdir\7z.exe")
  {
    #covers nano
    cd $toolsdir
    start-process .\7z.exe -argumentlist "x $filename -o`"$ExtractFolder`" -aoa" -nonewwindow -wait
  }
  Else
  {
    Throw "You need a copy of 7z.exe next to this script for this operating system.  You can get a copy at 7-zip.org"
  }

  If ($env:Path -inotlike "*$TargetFolder*")
  {
    Set-ItemProperty -Path 'Registry::HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment' -Name 'PATH' -Value "$env:Path;$TargetFolder"
  }
}

Copy-Item "$ExtractFolder\*" "$PF" -Force -Recurse
Remove-Item "$ExtractFolder" -Force -Recurse

$SSHLsaNeedsUpdating = $false
If (Test-Path "$env:windir\system32\ssh-lsa.dll")
{
  #Using file size because open ssh files are not currently versioned.  Submitted problem report asking for versioning to be done
  If (((get-item $env:windir\system32\ssh-lsa.dll).length) -ne ((get-item $TargetFolder\ssh-lsa.dll).length))
  {$SSHLsaNeedsUpdating = $true}
}
Else
{
  $SSHLsaNeedsUpdating = $true
}

If ($SSHAgentFeature)
{
  New-Service -Name ssh-agent -BinaryPathName "$TargetFolder\ssh-agent.exe" -Description "SSH Agent" -StartupType Automatic | Out-Null
  cmd.exe /c 'sc.exe sdset ssh-agent D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;IU)(A;;CCLCSWLOCRRC;;;SU)(A;;RP;;;AU)'

  Start-Service ssh-agent

  Start-Sleep -seconds 3

  If (!$UseNTRights)
  {
    #The code in this .PS1 has been tested on Nano - the hardest case to date for setting special privileges in script
    . "$toolsdir\AddAccountToLogonAsAService.ps1" -AccountToAdd "NT SERVICE\SSH-Agent"
  }
  Else
  {
    If (($OSBits -eq 64) -and (!(Test-Path "$env:windir\syswow64")))
    {
      Write-Warning "This 64-bit system does not have the WOW64 subsystem installed, please manually grant the right SeLogonAsAService to `"NT SERVICE\SSHD`"."
      Write-Warning "OR try again WITHOUT the /UseNTRights switch."
    }
    Else
    {
      write-output "Using ntrights.exe to grant logon as service."
      Start-Process "$TargetFolder\ntrights.exe" -ArgumentList "-u `"NT SERVICE\SSH-Agent`" +r SeAssignPrimaryTokenPrivilege"
    }
  }
}

If ($SSHServerFeature)
{
  Write-Warning "You have specified SSHServerFeature - this machine is being configured as an SSH Server including opening port $SSHServerPort."

    Write-Warning "You have specified SSHServerFeature - a new lsa provider will be installed."
    If (Test-Path "$env:windir\sysnative")
    { #We are running in a 32-bit process under 64-bit Windows
      $sys32dir = "$env:windir\sysnative"
    }
    Else
    { #We are on a 32-bit OS, or 64-bit proc on 64-bit OS
      $sys32dir = "$env:windir\system32"
    }

    If ($SSHLsaNeedsUpdating)
    {
      . "$toolsdir\fileinuseutils.ps1"
      $CopyLSAResult = Copy-FileEvenIfLocked "$TargetFolder\ssh-lsa.dll" "$sys32dir\ssh-lsa.dll"
    }

    #Don't destroy other values
    $key = get-item 'Registry::HKLM\System\CurrentControlSet\Control\Lsa'
    $values = $key.GetValue("Authentication Packages")
    If (!($Values -contains 'ssh-lsa'))
    {
      Write-Output "Adding ssh-lsa to authentication packages..."
      $values += 'ssh-lsa'
      Set-ItemProperty "HKLM:\SYSTEM\CurrentControlSet\Control\Lsa\" "Authentication Packages" $values
    }
    Else
    {
      Write-Output "ssh-lsa already configured in authentication packages..."
    }

  If((Test-Path "$TargetFolder\sshd_config") -AND ([bool]((gc "$TargetFolder\sshd_config") -ilike "*#LogLevel INFO*")))
  {
    Write-Warning "Explicitly disabling sshd logging as it currently logs about .5 GB / hour"
    (Get-Content "$TargetFolder\sshd_config") -replace '#LogLevel INFO', 'LogLevel QUIET' | Set-Content "$TargetFolder\sshd_config"
  }

  If((Test-Path "$TargetFolder\sshd_config"))
  {
    #(Get-Content "$TargetFolder\sshd_config") -replace '#LogLevel INFO', 'LogLevel QUIET' | Set-Content "$TargetFolder\sshd_config"
    (Get-Content "$TargetFolder\sshd_config") -replace '#LogLevel INFO', 'LogLevel QUIET' | Set-Content "$TargetFolder\sshd_config"

     $CurrentPortConfig = ((gc "$TargetFolder\sshd_config") -match "^#*Port\s\d*\s*$")
     If ([bool]($CurrentPortConfig -notmatch "^Port $SSHServerPort"))
     {
       Write-Output "Current port setting in `"$TargetFolder\sshd_config`" is `"$CurrentPortConfig`", setting it to `"Port $SSHServerPort`""
       (Get-Content "$TargetFolder\sshd_config") -replace "^#*Port\s\d*\s*$", "Port $SSHServerPort" | Set-Content "$TargetFolder\sshd_config"
     }
     Else
     {
       Write-Output "Current port setting in `"$TargetFolder\sshd_config`" already matches `"Port $SSHServerPort`", no action necessary."
     }
  }

  If (!(Test-Path "$TargetFolder\KeysGenerated.flg"))
  { #Only ever generate a key the first time SSHD server is installed
      Write-Output "Generating sshd keys in `"$TargetFolder`""
      start-process "$TargetFolder\ssh-keygen.exe" -ArgumentList '-A' -WorkingDirectory "$TargetFolder" -nonewwindow -wait
      New-Item "$TargetFolder\KeysGenerated.flg" -type File | out-null
  }
  Else
  {
    Write-Warning "Found existing server ssh keys in $TargetFolder, you must delete them manually to generate new ones."
  }

  netsh advfirewall firewall add rule name='SSHD Port OpenSSH (chocolatey package: openssh)' dir=in action=allow protocol=TCP localport=$SSHServerPort

  If ($DeleteServerKeysAfterInstalled)
  {
    pushd $TargetFolder
    Foreach ($keyfile in $keylist)
    {
      If (Test-Path $keyfile)
      {
        Remove-Item $keyfile -force
      }
    }
    popd
  }
  Else
  {
    Write-Warning "The following private keys should be removed from the machine: $keylist"
  }
  New-Service -Name sshd -BinaryPathName "$TargetFolder\sshd.exe" -Description "SSH Deamon" -StartupType Automatic -DependsOn ssh-agent | Out-Null
  sc.exe config sshd obj= "NT SERVICE\SSHD"

  If (!$UseNTRights)
  {
    #The code in this .PS1 has been tested on Nano - the hardest case to date for setting special privileges in script
    . "$toolsdir\AddAccountToAssignPrimaryToken.ps1" -AccountToAdd "NT SERVICE\SSHD"
    . "$toolsdir\AddAccountToLogonAsAService.ps1" -AccountToAdd "NT SERVICE\SSHD"
  }
  Else
  {
    If (($OSBits -eq 64) -and (!(Test-Path "$env:windir\syswow64")))
    {
      Write-Warning "This 64-bit system does not have the WOW64 subsystem installed, please manually grant the right SeLogonAsAService to `"NT SERVICE\SSHD`"."
      Write-Warning "OR try again WITHOUT the /UseNTRights switch."
    }
    Else
    {
      write-output "Using ntrights.exe to grant logon as service."
      Start-Process "$TargetFolder\ntrights.exe" -ArgumentList "-u `"NT SERVICE\SSHD`" +r SeAssignPrimaryTokenPrivilege"
    }
  }
}

If (CheckServicePath 'sshd.exe' "$TargetFolder")
{
  write-output "Starting SSHD..."
  Start-Service SSHD
}
If (CheckServicePath 'ssh-agent.exe' "$TargetFolder")
{
  write-output "Starting SSH-Agent..."
  Start-Service SSH-Agent
}

$keylist = "ssh_host_dsa_key", "ssh_host_rsa_key", "ssh_host_ecdsa_key", "ssh_host_ed25519_key"
$fullpathkeylist = "'$TargetFolder\ssh_host_dsa_key'", "'$TargetFolder\ssh_host_rsa_key'", "'$TargetFolder\ssh_host_ecdsa_key'", "'$TargetFolder\ssh_host_ed25519_key'"


If ($SSHServerFeature)
{
  If (!(Test-Path "$TargetFolder\KeysAddedToAgent.flg"))
  {
    Write-Output "Installing Server Keys into SSH-Agent"

    schtasks.exe /create /RU "NT AUTHORITY\SYSTEM" /RL HIGHEST /SC ONSTART /TN "ssh-add" /TR "'$TargetFolder\ssh-add.exe'  $fullpathkeylist" /F

    schtasks.exe /Run /I /TN "ssh-add"

    schtasks.exe /Delete /TN "ssh-add" /F

    New-Item "$TargetFolder\KeysAddedToAgent.flg" -type File | out-null
  }

  If ($SSHLsaNeedsUpdating)
  {
    Write-Warning "IMPORTANT: You must reboot so that key based authentication can be fully installed or upgraded for the SSHD Service."
  }
  If ($CopyLSAResult)
  {
    Write-Warning "CRITICAL: ssh-lsa.dll was locked - a reboot required to fully install the new version."
  }

}

Write-Warning "You must start a new prompt, or use the command 'refreshenv' (provided by your chocolatey install) to re-read the environment for the tools to be available in this shell session."

tools\chocolateyuninstall.ps1


$ErrorActionPreference = 'Stop'; # stop on all errors
$ProductName = (Get-ItemProperty -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion' -Name 'ProductName').ProductName
$EditionId = (Get-ItemProperty -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion' -Name 'EditionID').EditionId

Write-Output "Running on: $ProductName, ($EditionId)"

If ($EditionId -ilike '*Nano*')
{$RunningOnNano = $True}

If (Test-Path variable:shimgen)
{$RunningUnderChocolatey = $True}
Else
{  Write-Output "Running Without Chocolatey"}

$packageName= 'openssh'
$toolsDir   = "$(Split-Path -parent $MyInvocation.MyCommand.Definition)"

$OSBits = ([System.IntPtr]::Size * 8) #Get-ProcessorBits

#On 64-bit, always favor 64-bit Program Files no matter what our execution is now (works back past XP / Server 2003)
If ($env:ProgramFiles.contains('x86'))
{
  $PF = $env:ProgramFiles.replace(' (x86)','')
}
Else
{
  $PF = $env:ProgramFiles
}

#$TargetFolder = "$PF\OpenSSH"
$TargetFolder = "$PF\OpenSSH-Win$($OSBits)"
$TargetFolderOld = "$PF\OpenSSH-Win$($OSBits)"

If ($RunningUnderChocolatey)
{
  # Default the values before reading params
  $SSHServerFeature = $false
  $KeyBasedAuthenticationFeature = $false
  $DeleteConfigAndServerKeys = $false

  $arguments = @{};
  $packageParameters = $env:chocolateyPackageParameters
}
# Now parse the packageParameters using good old regular expression
if ($packageParameters) {
    $match_pattern = "\/(?<option>([a-zA-Z]+)):(?<value>([`"'])?([a-zA-Z0-9- _\\:\.]+)([`"'])?)|\/(?<option>([a-zA-Z]+))"
    #"
    $option_name = 'option'
    $value_name = 'value'

    if ($packageParameters -match $match_pattern ){
        $results = $packageParameters | Select-String $match_pattern -AllMatches
        $results.matches | % {
          $arguments.Add(
              $_.Groups[$option_name].Value.Trim(),
              $_.Groups[$value_name].Value.Trim())
      }
    }
    else
    {
      throw "Package Parameters were found but were invalid (REGEX Failure)"
    }

    if ($arguments.ContainsKey("SSHServerFeature")) {
        Write-Host "/SSHServerFeature - Uninstalling SSH Server Feature if Present."
        $SSHServerFeature = $true
    }

    if ($arguments.ContainsKey("DeleteConfigAndServerKeys")) {
        Write-Host "/DeleteConfigAndServerKeys - Removing SSH Config and Server Keys."
        $DeleteConfigAndServerKeys = $true
    }

} else {
    Write-Debug "No Package Parameters Passed in";
}

Function CheckServicePath ($ServiceEXE,$FolderToCheck)
{
  #The modern way:
  #Return ([bool]((Get-WmiObject win32_service | ?{$_.Name -ilike "*$ServiceEXE*"} | select -expand PathName) -ilike "*$FolderToCheck*"))
  #The NANO TP5 Compatible Way:
  Return ([bool]((wmic service | ?{$_ -ilike "*$ServiceEXE*"}) -ilike "*$FolderToCheck*"))
}

#$SSHServiceInstanceExistsAndIsOurs = ([bool]((Get-WmiObject win32_service | ?{$_.Name -ilike 'sshd'} | select -expand PathName) -ilike "*$TargetFolder*"))
$SSHServiceInstanceExistsAndIsOurs = CheckServicePath 'sshd' "$TargetFolder"
#$SSHAGENTServiceInstanceExistsAndIsOurs = ([bool]((Get-WmiObject win32_service | ?{$_.Name -ilike 'ssh-agent'} | select -expand PathName) -ilike "*$TargetFolder*"))
$SSHAGENTServiceInstanceExistsAndIsOurs = CheckServicePath 'ssh-agent' "$TargetFolder"

If ($SSHServerFeature -AND (!$SSHServiceInstanceExistsAndIsOurs) -AND (Get-Service sshd -ErrorAction SilentlyContinue))
{
  $ExistingSSHDInstancePath = (Get-WmiObject win32_service | ?{$_.Name -ilike 'sshd'} | select -expand PathName)
  Throw "You have requested that the SSHD service be uninstalled, but this system appears to have an instance of an SSHD service configured for another folder ($ExistingSSHDInstancePath).  Ignoring /SSHServerFeature"
  $SSHServerFeature = $False
}

If ((!$SSHServerFeature) -AND $SSHServiceInstanceExistsAndIsOurs)
{
  Throw "There is a configured instance of the SSHD service, please specify the /SSHServerFeature to confirm it is OK to UNINSTALL the SSHD service at this time."
}


If ([bool](get-process ssh -erroraction silentlycontinue | where {$_.Path -ilike "*$TargetPath*"}))
{
  Throw "It appears you have instances of ssh.exe (client) running from the folder this package installs to, please terminate them and try again."
}

If ($SSHServiceInstanceExistsAndIsOurs -AND ([bool](Get-Service SSHD -ErrorAction SilentlyContinue | where {$_.Status -ieq 'Running'})))
{
    Stop-Service SSHD -Force
    Stop-Service SSH-Agent -Force
    Start-Sleep -seconds 3
    If (([bool](Get-Service SSHD | where {$_.Status -ieq 'Running'})))
    {
      Throw "Could not stop the SSHD service, please stop manually and retry this package."
    }
    Stop-Service ssh-agent -Force
    Start-Sleep -seconds 3
    If (([bool](Get-Service ssh-agent | where {$_.Status -ieq 'Running'})))
    {
      Throw "Could not stop the ssh-agent service, please stop manually and retry this package."
    }
}

If ((get-item 'Registry::HKLM\System\CurrentControlSet\Control\Lsa').getvalue("authentication packages") -contains '0ssh-lsa.dll')
{
  $KeyBasedAuthenticationFeatureINSTALLED = $True
}

#uninstall agent service if it was installed without SSHD
If ($SSHAGENTServiceInstanceExistsAndIsOurs -AND (!$SSHServiceInstanceExistsAndIsOurs))
{
  Stop-Service ssh-agent -Force
  sc.exe delete ssh-agent | out-null
}

If ($SSHServiceInstanceExistsAndIsOurs -AND ($SSHServerFeature))
{
  Stop-Service sshd -Force
  sc.exe delete sshd  | out-null
  Stop-Service ssh-agent -Force
  sc.exe delete ssh-agent | out-null
}

If ($KeyBasedAuthenticationFeatureINSTALLED)
{
  If (Test-Path "$env:windir\sysnative")
  { #We are running in a 32-bit process under 64-bit Windows
    $sys32dir = "$env:windir\sysnative"
  }
  Else
  { #We are on a 32-bit OS, or 64-bit proc on 64-bit OS
    $sys32dir = "$env:windir\system32"
  }

  $AuthpkgToRemove = 'ssh-lsa'
  foreach ($authpackage in (get-item 'Registry::HKLM\System\CurrentControlSet\Control\Lsa').getvalue("authentication packages"))
  {
    If ($authpackage)
    {
      If ($authpackage -ine "$AuthpkgToRemove")
      {
        [string[]]$Newauthpackages += "$authpackage"
      }
    }
  }
  Set-ItemProperty "HKLM:\SYSTEM\CurrentControlSet\Control\Lsa\" "Authentication Packages" $Newauthpackages
  del "$sys32dir\ssh-lsa.dll" -force
}

#Don't remove config in case they reinstall.
If (($SSHServiceInstanceExistsAndIsOurs -AND $DeleteConfigAndServerKeys) -OR (!$SSHServiceInstanceExistsAndIsOurs))
{
    Write-Warning "Removing all config and server keys as requested by /DeleteConfigAndServerKeys"
    If (Test-Path $TargetFolder) {Remove-Item "$TargetFolder" -Recurse -Force}
    If (Test-Path $TargetFolderOLD) {Remove-Item "$TargetFolderOLD" -Recurse -Force}
}
Else
{

  If (Test-Path $TargetFolder) {Get-ChildItem "$TargetFolder\*.*" -include *.exe,*.dll,*.cmd | Remove-Item -Recurse -Force}
  Write-Warning "NOT REMOVED: Config files and any keys in `"$TargetFolder`" were NOT REMOVED - you must remove them manually or use the package uninstall parameter /DeleteConfigAndServerKeys."
}
netsh advfirewall firewall delete rule name='SSHD Port OpenSSH (chocolatey package: openssh)'

$PathToRemove = "$TargetFolder"
#Code has been modified to work with Nano - do not change method of environment variable access
#foreach ($path in [Environment]::GetEnvironmentVariable("PATH","Machine").split(';'))
foreach ($path in ((Get-ItemProperty 'Registry::HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment').path.split(';')))
{
  If ($Path)
  {
    If (($path -ine "$PathToRemove") -AND ($path -ine "$PathToRemove\"))
    {
      [string[]]$Newpath += "$path"
    }
  }
}
$AssembledNewPath = ($newpath -join(';')).trimend(';')

Set-ItemProperty -Path 'Registry::HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment' -Name 'PATH' -Value "$AssembledNewPath"
#[Environment]::SetEnvironmentVariable("PATH",$AssembledNewPath,"Machine")

tools\fileinuseutils.ps1



Add-Type @'
    using System;
    using System.Text;
    using System.Runtime.InteropServices;

    public class LockedFileUtils
    {
      public enum MoveFileFlags
      {
          MOVEFILE_REPLACE_EXISTING           = 0x00000001,
          MOVEFILE_COPY_ALLOWED               = 0x00000002,
          MOVEFILE_DELAY_UNTIL_REBOOT         = 0x00000004,
          MOVEFILE_WRITE_THROUGH              = 0x00000008,
          MOVEFILE_CREATE_HARDLINK            = 0x00000010,
          MOVEFILE_FAIL_IF_NOT_TRACKABLE      = 0x00000020
      }

        [DllImport("kernel32.dll", SetLastError = true, CharSet = CharSet.Unicode)]
        static extern bool MoveFileEx(string lpExistingFileName, string lpNewFileName, MoveFileFlags dwFlags);

        public static bool DeleteLockedFile (string sourcefile)
        {
            return MoveFileEx(sourcefile, null, MoveFileFlags.MOVEFILE_DELAY_UNTIL_REBOOT);
        }
        public static bool CopyLockedFile (string sourcefile, string destination)
        {
            return MoveFileEx(sourcefile, destination, MoveFileFlags.MOVEFILE_DELAY_UNTIL_REBOOT);
        }
    }
'@

Function Remove-FileEvenIfLocked
{
  param ([parameter(mandatory=$true,ValueFromPipeline)][string]$Path)
  Process
  {
    $path = (Resolve-Path $path -ErrorAction Stop).Path

    try
    {
      Remove-Item $path -ErrorAction Stop
    }
    catch [System.IO.IOException]
    {
      If ($_.exception -ilike "*used by another process*")
      {
        Write-host "$path is locked by another process, attempting to setup removal at reboot..."
        $deleteResult = [LockedFileUtils]::DeleteLockedFile($path)
        if ($deleteResult -eq $false)
        {
          throw "Was not able to remove in use file $path `r`n $(New-Object System.ComponentModel.Win32Exception)"
        }
        else
        {
          write-host "(File locked.  Deleting $path at next reboot.  Reboot is required to complete operation.)"
        }
      }
    }
  }
}

Function Copy-FileEvenIfLocked
{
  param ([parameter(mandatory=$true,ValueFromPipeline)][string]$Path,
         [parameter(mandatory=$true,ValueFromPipeline)][string]$Destination)
  Process
  {
    $Path = (Resolve-Path $path -ErrorAction Stop).Path
    Write-output "`$path is now $path"
    $Destination = (Resolve-Path $Destination -ErrorAction Stop).Path
    Write-output "`$Destination is now $Destination"

    try
    {
      Copy-Item $Path $Destination -ErrorAction Stop
      Return "RebootNotRequired"
    }
    catch [System.IO.IOException]
    {
      If ($_.exception -ilike "*used by another process*")
      {
        Write-host "$path is locked by another process, attempting to setup copy at reboot..."
        $deleteResult = [LockedFileUtils]::CopyLockedFile($path,$Destination)
        if ($deleteResult -eq $false)
        {
          throw "Was not able to copy in use file $path to $destination `r`n $(New-Object System.ComponentModel.Win32Exception)"
        }
        else
        {
          write-host "Destination file is locked.  Copying $path to $Destination at next reboot.  Reboot is required to complete operation.)"
          Return "RebootRequired"
        }
      }
    }
  }
}

tools\Get-NetStat.ps1

function Get-NetStat
{
<#
.SYNOPSIS
	This function will get the output of netstat -n and parse the output
.DESCRIPTION
	This function will get the output of netstat -n and parse the output
.LINK
	http://www.lazywinadmin.com/2014/08/powershell-parse-this-netstatexe.html
.NOTES
	Francois-Xavier Cat
	www.lazywinadmin.com
	@LazyWinAdm

  2016/09/20 - Modified by DawinJS to:
  - only grab TCP ports so that parsing PID would be reliable (and is sufficient for my purposes)
  - If -GetProcessDetails
    - parse PID
    - use "get-process" to find exe name (netstat -b is not pulling it for my scenario)
    - finds a full process path name in a Nano TP5 compatible way (WMIC)
  - If -ShowProgress - show progress bar - takes a while to grab all exe paths for all processes
  - If -FilterOnPorts - filter results for these ports before grabbing process details

#>
Param (
  [switch]$ShowProgress,
  [string[]]$FilterOnPorts,
  [switch]$GetProcessDetails
  )
	PROCESS
	{
		# Get the output of netstat
		$data = netstat -a -n -o -p TCP | select -skip 4

		# Keep only the line with the data (we remove the first lines)
		#$data = $data[4..$data.count]

		# Each line need to be splitted and get rid of unnecessary spaces
		foreach ($line in $data)
		{
      If ($ShowProgress)
      {
        $ItemBeingProcessed++
        $percentdone = [math]::round(($ItemBeingProcessed/$data.count) * 100)
        Write-Progress -Activity "Probing Listening Ports" -Status "$percentdone% Complete:" -PercentComplete $percentdone
      }

      $AddInstance = $True
      # Get rid of the first whitespaces, at the beginning of the line
			$line = $line -replace '^\s+', ''

			# Split each property on whitespaces block
			$line = $line -split '\s+'

      $PortFromNetStat = (($line[1] -split ":")[1]).trim(' ')

      If ($FilterOnPorts)
      {
         If  (!($FilterOnPorts -contains $PortFromNetStat))
         {
           $AddInstance = $False
         }
      }

      If ($GetProcessDetails -AND $AddInstance)
      {
        If ($line[4].length -ge 1)
        {
        $ProcessInfo = Get-Process -id $($line[4])
        $ProcessEXEPath = $null

        If ([string](wmic process where "ProcessId='$($line[4])'" get ExecutablePath /format:list) -match "[A-Z]:\\.*exe")
        {
          #write-output "match: *$($Matches[0])*"
          $ProcessEXEPath = "$($Matches[0])"
        }
   <#
           If (Test-Path variable:matches) {write-host "got a match"}

            If ($getresult.GetType().Name -eq 'Boolean')
            {
              $ProcessEXEPath = ($Matches[0]).trimend(' ')
            }
            ElseIf ($getresult.GetType().Name -eq 'String')
            {
              $ProcessEXEPath = $getresult.trimend(' ')
            }
            Else
            {
              $ProcessEXEPath = ''
            }
            #>
        }
      }
      If ($AddInstance)
      {
			# Define the properties
  			$properties = @{
	  			Protocol = $line[0].trim(' ')
		  		LocalAddressIP = ($line[1] -split ":")[0].trim(' ')
			  	LocalAddressPort = $PortFromNetStat
          LocalAddressPID = ($line[4]).trim(' ')
          LocalAddressProcessName = $ProcessInfo.Name
          LocalAddressProcessPath = $ProcessEXEPath
		  		ForeignAddressIP = ($line[2] -split ":")[0].trim(' ')
			  	ForeignAddressPort = ($line[2] -split ":")[1].trim(' ')
				  State = $line[3]
			  }

			  # Output the current line
			  New-Object -TypeName PSObject -Property $properties
      }
		}
	}
}

tools\LICENSE.txt

Copy of: https://raw.githubusercontent.com/PowerShell/Win32-OpenSSH/L1-Prod/LICENCE

This file is part of the OpenSSH software.

The licences which components of this software fall under are as
follows.  First, we will summarize and say that all components
are under a BSD licence, or a licence more free than that.

OpenSSH contains no GPL code.

1)
     * Copyright (c) 1995 Tatu Ylonen <[email protected]>, Espoo, Finland
     *                    All rights reserved
     *
     * As far as I am concerned, the code I have written for this software
     * can be used freely for any purpose.  Any derived versions of this
     * software must be clearly marked as such, and if the derived work is
     * incompatible with the protocol description in the RFC file, it must be
     * called by a name other than "ssh" or "Secure Shell".

    [Tatu continues]
     *  However, I am not implying to give any licenses to any patents or
     * copyrights held by third parties, and the software includes parts that
     * are not under my direct control.  As far as I know, all included
     * source code is used in accordance with the relevant license agreements
     * and can be used freely for any purpose (the GNU license being the most
     * restrictive); see below for details.

    [However, none of that term is relevant at this point in time.  All of
    these restrictively licenced software components which he talks about
    have been removed from OpenSSH, i.e.,

     - RSA is no longer included, found in the OpenSSL library
     - IDEA is no longer included, its use is deprecated
     - DES is now external, in the OpenSSL library
     - GMP is no longer used, and instead we call BN code from OpenSSL
     - Zlib is now external, in a library
     - The make-ssh-known-hosts script is no longer included
     - TSS has been removed
     - MD5 is now external, in the OpenSSL library
     - RC4 support has been replaced with ARC4 support from OpenSSL
     - Blowfish is now external, in the OpenSSL library

    [The licence continues]

    Note that any information and cryptographic algorithms used in this
    software are publicly available on the Internet and at any major
    bookstore, scientific library, and patent office worldwide.  More
    information can be found e.g. at "http://www.cs.hut.fi/crypto".

    The legal status of this program is some combination of all these
    permissions and restrictions.  Use only at your own responsibility.
    You will be responsible for any legal consequences yourself; I am not
    making any claims whether possessing or using this is legal or not in
    your country, and I am not taking any responsibility on your behalf.


			    NO WARRANTY

    BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
    FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
    OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
    PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
    OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
    MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
    TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
    PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
    REPAIR OR CORRECTION.

    IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
    WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
    REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
    INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
    OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
    TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
    YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
    PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
    POSSIBILITY OF SUCH DAMAGES.

2)
    The 32-bit CRC compensation attack detector in deattack.c was
    contributed by CORE SDI S.A. under a BSD-style license.

     * Cryptographic attack detector for ssh - source code
     *
     * Copyright (c) 1998 CORE SDI S.A., Buenos Aires, Argentina.
     *
     * All rights reserved. Redistribution and use in source and binary
     * forms, with or without modification, are permitted provided that
     * this copyright notice is retained.
     *
     * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
     * WARRANTIES ARE DISCLAIMED. IN NO EVENT SHALL CORE SDI S.A. BE
     * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY OR
     * CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OR MISUSE OF THIS
     * SOFTWARE.
     *
     * Ariel Futoransky <[email protected]>
     * <http://www.core-sdi.com>

3)
    ssh-keyscan was contributed by David Mazieres under a BSD-style
    license.

     * Copyright 1995, 1996 by David Mazieres <[email protected]>.
     *
     * Modification and redistribution in source and binary forms is
     * permitted provided that due credit is given to the author and the
     * OpenBSD project by leaving this copyright notice intact.

4)
    The Rijndael implementation by Vincent Rijmen, Antoon Bosselaers
    and Paulo Barreto is in the public domain and distributed
    with the following license:

     * @version 3.0 (December 2000)
     *
     * Optimised ANSI C code for the Rijndael cipher (now AES)
     *
     * @author Vincent Rijmen <[email protected]>
     * @author Antoon Bosselaers <[email protected]>
     * @author Paulo Barreto <[email protected]>
     *
     * This code is hereby placed in the public domain.
     *
     * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ''AS IS'' AND ANY EXPRESS
     * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
     * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE
     * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
     * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
     * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
     * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
     * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

5)
    One component of the ssh source code is under a 3-clause BSD license,
    held by the University of California, since we pulled these parts from
    original Berkeley code.

     * Copyright (c) 1983, 1990, 1992, 1993, 1995
     *      The Regents of the University of California.  All rights reserved.
     *
     * Redistribution and use in source and binary forms, with or without
     * modification, are permitted provided that the following conditions
     * are met:
     * 1. Redistributions of source code must retain the above copyright
     *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     * 3. Neither the name of the University nor the names of its contributors
     *    may be used to endorse or promote products derived from this software
     *    without specific prior written permission.
     *
     * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
     * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
     * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     * SUCH DAMAGE.

6)
    Remaining components of the software are provided under a standard
    2-term BSD licence with the following names as copyright holders:

	Markus Friedl
	Theo de Raadt
	Niels Provos
	Dug Song
	Aaron Campbell
	Damien Miller
	Kevin Steves
	Daniel Kouril
	Wesley Griffin
	Per Allansson
	Nils Nordman
	Simon Wilkinson

    Portable OpenSSH additionally includes code from the following copyright
    holders, also under the 2-term BSD license:

	Ben Lindstrom
	Tim Rice
	Andre Lucas
	Chris Adams
	Corinna Vinschen
	Cray Inc.
	Denis Parker
	Gert Doering
	Jakob Schlyter
	Jason Downs
	Juha Yrj�l�
	Michael Stone
	Networks Associates Technology, Inc.
	Solar Designer
	Todd C. Miller
	Wayne Schroeder
	William Jones
	Darren Tucker
	Sun Microsystems
	The SCO Group
	Daniel Walsh
	Red Hat, Inc
	Simon Vallet / Genoscope

     * Redistribution and use in source and binary forms, with or without
     * modification, are permitted provided that the following conditions
     * are met:
     * 1. Redistributions of source code must retain the above copyright
     *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     *
     * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

8) Portable OpenSSH contains the following additional licenses:

    a) md5crypt.c, md5crypt.h

	 * "THE BEER-WARE LICENSE" (Revision 42):
	 * <[email protected]> wrote this file.  As long as you retain this
	 * notice you can do whatever you want with this stuff. If we meet
	 * some day, and you think this stuff is worth it, you can buy me a
	 * beer in return.   Poul-Henning Kamp

    b) snprintf replacement

	* Copyright Patrick Powell 1995
	* This code is based on code written by Patrick Powell
	* ([email protected]) It may be used for any purpose as long as this
	* notice remains intact on all source code distributions

    c) Compatibility code (openbsd-compat)

       Apart from the previously mentioned licenses, various pieces of code
       in the openbsd-compat/ subdirectory are licensed as follows:

       Some code is licensed under a 3-term BSD license, to the following
       copyright holders:

	Todd C. Miller
	Theo de Raadt
	Damien Miller
	Eric P. Allman
	The Regents of the University of California
	Constantin S. Svintsoff

	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions
	* are met:
	* 1. Redistributions of source code must retain the above copyright
	*    notice, this list of conditions and the following disclaimer.
	* 2. Redistributions in binary form must reproduce the above copyright
	*    notice, this list of conditions and the following disclaimer in the
	*    documentation and/or other materials provided with the distribution.
	* 3. Neither the name of the University nor the names of its contributors
	*    may be used to endorse or promote products derived from this software
	*    without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
	* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
	* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
	* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
	* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
	* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
	* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
	* SUCH DAMAGE.

       Some code is licensed under an ISC-style license, to the following
       copyright holders:

	Internet Software Consortium.
	Todd C. Miller
	Reyk Floeter
	Chad Mynhier

	* Permission to use, copy, modify, and distribute this software for any
	* purpose with or without fee is hereby granted, provided that the above
	* copyright notice and this permission notice appear in all copies.
	*
	* THE SOFTWARE IS PROVIDED "AS IS" AND TODD C. MILLER DISCLAIMS ALL
	* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
	* OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL TODD C. MILLER BE LIABLE
	* FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
	* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
	* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
	* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

       Some code is licensed under a MIT-style license to the following
       copyright holders:

	Free Software Foundation, Inc.

	* Permission is hereby granted, free of charge, to any person obtaining a  *
	* copy of this software and associated documentation files (the            *
	* "Software"), to deal in the Software without restriction, including      *
	* without limitation the rights to use, copy, modify, merge, publish,      *
	* distribute, distribute with modifications, sublicense, and/or sell       *
	* copies of the Software, and to permit persons to whom the Software is    *
	* furnished to do so, subject to the following conditions:                 *
	*                                                                          *
	* The above copyright notice and this permission notice shall be included  *
	* in all copies or substantial portions of the Software.                   *
	*                                                                          *
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS  *
	* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF               *
	* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.   *
	* IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,   *
	* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR    *
	* OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR    *
	* THE USE OR OTHER DEALINGS IN THE SOFTWARE.                               *
	*                                                                          *
	* Except as contained in this notice, the name(s) of the above copyright   *
	* holders shall not be used in advertising or otherwise to promote the     *
	* sale, use or other dealings in this Software without prior written       *
	* authorization.                                                           *
	****************************************************************************/


------
$OpenBSD: LICENCE,v 1.19 2004/08/30 09:18:08 markus Exp $

tools\ntrights.exe

md5: 416C43AEB17252EE33048BD1F277D2A5 | sha1: 085DEB77551F9F6201E5AA352B62CAD91C3005E5 | sha256: F46BAA1B6227226518E42263E9B4808F81C27D060207DF160F9AC64DEAE4F4F5 | sha512: 3155DE3FB04F1DF246D6CECFA1C89F8AE9963C18BE1CE717731FF210AB39D537BE01231002A54D4346B4116E3505F387C92DFECC18A80CE7EB99C6D33E5F1F2A

tools\ntrights.exe.ignore

tools\OpenSSH-Win32.zip

md5: ECE23DB1550903EB7747CA1359ECC941 | sha1: 59A1A7A0E4664CE16C212452459E2B21522FA46D | sha256: 7C00A69EBCDFF69AECE27B1F40EE4213ED2DF43382983376914BD0E609DB1A94 | sha512: 0F0F8EC7E29102D062979208FE5910358B358EA225463F264EF88F3237605F36ACD9A719412C40AC58AEC55FEF30CD7D53DD4612F87F06EB65A5D4A66A385DA1

tools\OpenSSH-Win64.zip

md5: 506AAD8B73127028C5B7BCD76C2B75EF | sha1: 46D61364B3B948F3A2B2D204ED8DFADCF687A192 | sha256: 617D03D456354B34B81939A42D472ECB8509A7446BB95FAA32ED86B950137D67 | sha512: 8C8FE52C2E7E989B2D562D9ED7C4B27B8724514FE4762968147203B27674474BD203FBC357B140A0AB57562A9691D4D193B27D71AF482DE53882FC5AC964ADC1

tools\VERIFICATION.txt

VERIFICATION.txt is intended to assist the Chocolatey moderators and community
in verifying that this package's contents are trustworthy.

To verify:

1. Download https://github.com/PowerShell/Win32-OpenSSH/releases/download/5_30_2016/OpenSSH-Win64.zip
2. Compare OpenSSH-Win64.zip hash with bundled OpenSSH-Win64.zip hash.
3. Download https://github.com/PowerShell/Win32-OpenSSH/releases/download/5_30_2016/OpenSSH-Win32.zip
4. Compare OpenSSH-Win64.zip hash with bundled OpenSSH-Win32.zip hash.

Virus Scan Results

7z.dll (7f47382791a5) - ## / 72
7z.exe (bb783a594067) - ## / 69
ntrights.exe (f46baa1b6227) - ## / 68
OpenSSH-Win32.zip (7c00a69ebcdf) - ## / 57
OpenSSH-Win64.zip (617d03d45635) - ## / 56
scp.exe (65321add8d5c) - ## / 61
sftp-server.exe (26636a897a57) - ## / 61
sftp.exe (733e6c50c81f) - ## / 61
ssh-add.exe (0db890b2ba51) - ## / 61
ssh-agent.exe (68fe07938667) - ## / 61
ssh-keygen.exe (d9abc4e546da) - ## / 60
ssh-lsa.dll (cefef3497e21) - ## / 58
ssh-shellhost.exe (e3b974a6e462) - ## / 58
ssh.exe (67ae6d3ad22e) - ## / 61
sshd.exe (4f857c92bf70) - ## / 60
openssh.0.0.9.20170306.nupkg (6f1c8d3ce6a5) - ## / 57

In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).

Chocolatey Pro provides runtime protection from possible malware.

Version History

Version	Downloads	Last Updated	Status
Win32 OpenSSH (Universal Installer) 9.5.0-beta20240403	17676	Wednesday, April 3, 2024	Exempted
Win32 OpenSSH (Universal Installer) 9.5.0-beta1	9785	Saturday, December 30, 2023	Exempted
Win32 OpenSSH (Universal Installer) 9.4.0-beta1	99	Saturday, December 30, 2023	Exempted
Win32 OpenSSH (Universal Installer) 9.2.2-beta1	12075	Thursday, May 18, 2023	Exempted
Win32 OpenSSH (Universal Installer) 9.2.0-beta1	52	Saturday, December 30, 2023	Exempted
Win32 OpenSSH (Universal Installer) 9.1.0-beta1	37	Saturday, December 30, 2023	Exempted
Win32 OpenSSH (Universal Installer) 8.9.1-beta1	79	Saturday, December 30, 2023	Exempted
Win32 OpenSSH (Universal Installer) 8.9.0-beta1	53	Friday, December 29, 2023	Exempted
Win32 OpenSSH (Universal Installer) 8.6.0-beta1	78158	Saturday, May 29, 2021	Approved
Win32 OpenSSH (Universal Installer) 8.1.0-beta	56020	Tuesday, January 14, 2020	Approved
Win32 OpenSSH (Universal Installer) 8.0.0.1	2273260	Tuesday, June 25, 2019	Approved
Win32 OpenSSH (Universal Installer) 7.9.0.1	599779	Sunday, January 13, 2019	Approved
Win32 OpenSSH (Universal Installer) 7.7.2.1	1881732	Sunday, July 29, 2018	Approved
Win32 OpenSSH (Universal Installer) 7.7.1.1	260380	Tuesday, June 5, 2018	Approved
Win32 OpenSSH (Universal Installer) 7.7.0.1	17880	Friday, June 1, 2018	Approved
Win32 OpenSSH (Universal Installer) 7.6.1.1	171345	Sunday, April 15, 2018	Approved
Win32 OpenSSH (Universal Installer) 7.6.0.1	215207	Friday, March 2, 2018	Approved
Win32 OpenSSH (Universal Installer) 1.0.0.20180202	187403	Saturday, February 3, 2018	Approved
Win32 OpenSSH (Universal Installer) 1.0.0.20180201	10900	Thursday, February 1, 2018	Approved
Win32 OpenSSH (Universal Installer) 1.0.0.20180131	5752	Wednesday, January 31, 2018	Approved
Win32 OpenSSH (Universal Installer) 1.0.0.0	1672	Wednesday, January 31, 2018	Approved
Win32 OpenSSH (Universal Installer) 0.0.24.0	157439	Tuesday, December 5, 2017	Approved
Win32 OpenSSH (Universal Installer) 0.0.23.0	44738	Monday, November 20, 2017	Approved
Win32 OpenSSH (Universal Installer) 0.0.22.0	62866	Sunday, October 29, 2017	Approved
Win32 OpenSSH (Universal Installer) 0.0.21.0	73583	Tuesday, October 3, 2017	Approved
Win32 OpenSSH (Universal Installer) 0.0.20.20170913	62464	Thursday, September 14, 2017	Approved
Win32 OpenSSH (Universal Installer) 0.0.20.0	10224	Monday, September 11, 2017	Approved
Win32 OpenSSH (Universal Installer) 0.0.19.0	40248	Friday, August 25, 2017	Approved
Win32 OpenSSH (Universal Installer) 0.0.18.0	50862	Thursday, July 20, 2017	Approved
Win32 OpenSSH (Universal Installer) 0.0.17.0	26574	Tuesday, July 4, 2017	Approved
Win32 OpenSSH (Universal Installer) 0.0.16.0	22641	Friday, June 16, 2017	Approved
Win32 OpenSSH (Universal Installer) 0.0.15.20170613	2140	Wednesday, June 14, 2017	Approved
Win32 OpenSSH (Universal Installer) 0.0.15.20170611	1562	Monday, June 12, 2017	Approved
Win32 OpenSSH (Universal Installer) 0.0.15.0	525	Monday, June 12, 2017	Approved
Win32 OpenSSH (Universal Installer) 0.0.14.0	28389	Saturday, May 20, 2017	Approved
Win32 OpenSSH (Microsoft Port) 0.0.12.0	9957	Tuesday, April 18, 2017	Approved
Win32 OpenSSH (Microsoft Port) 0.0.11.0	7127	Friday, April 7, 2017	Approved
Win32 OpenSSH (Microsoft Port) 0.0.10.20170402	1584	Sunday, April 2, 2017	Approved
Win32 OpenSSH (Microsoft Port) 0.0.10.20170329	1428	Thursday, March 30, 2017	Approved
Win32 OpenSSH (Microsoft Port) 0.0.10.0	3350	Wednesday, March 15, 2017	Approved
Win32 OpenSSH (Microsoft Port) 0.0.9.20170313	917	Monday, March 13, 2017	Approved
Win32 OpenSSH (Microsoft Port) 0.0.9.20170311	929	Saturday, March 11, 2017	Approved
Win32 OpenSSH (Microsoft Port) 0.0.9.20170308	1374	Wednesday, March 8, 2017	Approved
Win32 OpenSSH (Microsoft Port) 0.0.9.20170306	762	Tuesday, March 7, 2017	Approved
Win32 OpenSSH (Microsoft Port) 0.0.9.20170226	2564	Sunday, February 26, 2017	Approved
Win32 OpenSSH (Microsoft Port) 0.0.9.20170222	1490	Wednesday, February 22, 2017	Approved
Win32 OpenSSH (Microsoft Port) 0.0.9.0	1709	Thursday, February 16, 2017	Approved
Win32 OpenSSH (Microsoft Port) 0.0.8.0	3940	Tuesday, January 31, 2017	Approved
Win32 OpenSSH (Microsoft Port) 0.0.7.0	3893	Monday, January 16, 2017	Approved
Win32 OpenSSH (Microsoft Port) 0.0.6.0	2954	Wednesday, January 4, 2017	Approved
Win32 OpenSSH (Microsoft Port) 0.0.5.0	520	Wednesday, January 4, 2017	Approved
Win32 OpenSSH (Microsoft Port) 0.0.4.0	6834	Wednesday, November 30, 2016	Approved
Win32 OpenSSH (Microsoft Port) 0.0.3.0	6342	Tuesday, November 8, 2016	Approved
Win32 OpenSSH (Microsoft Port) 0.0.2.20161026	4799	Wednesday, October 26, 2016	Approved
Win32 OpenSSH (Microsoft Port) 0.0.2.0	1029	Tuesday, October 25, 2016	Approved
Win32 OpenSSH (Microsoft Port) 0.0.1.0	3853	Saturday, October 1, 2016	Approved
Win32 OpenSSH (Microsoft Port) 0.0.0.901	1717	Friday, September 23, 2016	Approved
Win32 OpenSSH (Microsoft Port) 0.0.0.9	632	Wednesday, September 21, 2016	Approved

Microsoft

Release Notes

Product release notes: https://github.com/PowerShell/Win32-OpenSSH/releases/tag/v0.0.8.0

Release Note for Chocolatey Packaging:
0.0.9.20170306 - fix to ensure sshlsa.dll always gets installed when it should (thanks @felfert !)
0.0.9.20170226 - fix to allow barebones.ps1 to work on PSH 2 (e.g. Server 2008 R2)
0.0.9.20170222 - removal of stray file
0.0.9.0 - fix for problem detecting our install of sshd
0.0.8.0 - none
0.0.7.0 - none
0.0.6.0 - none
0.0.5.0 - none
0.0.4.0 - none

0.0.3.0
- NEW: If ssh-lsa.dll is locked at install time, package schedules it to be updated at reboot
displays a "CRITICAL" message noting that a reboot is needed.

0.0.2.20161026
- FIX: "Get-FileHash" is only used if it is available

0.0.2.0
- NEW: /SSHAgentFeature - enables SSH agent for use with client tools when /SSHServerFeature is not used.
- NEW: Sample Dockerfile included for Server Core 2016 or Nano.
- FIX: Uninstall improved.
- NEW: InstallChoco_and_win32-openssh.ps1 and InstallChoco_and_win32-openssh_with_server.ps1 both refresh
the environment after installing OpenSSH so it can be used in the same console it was installed in.
- FIX: ssh-add is only run after ssh-agent is started.
- FIX: sshd and ssh-agent are always started (if installed), however, a warning to reboot is still generated
if key based authentication is being used.

0.0.0.9
- NEW: Chocolatey package id is now "openssh"
- NEW: Set listenting port with parameter /SSHServerPort
- NEW: Enhanced detection of possible port conflicts with requested listening port
Specifically calls out Developer Mode SSH (Windows 10 Developer Mode)
- NEW: more complete readme: https://github.com/DarwinJS/ChocoPackages/blob/master/openssh/readme.md
- NEW: install on Nano and ServerCore w/out WOW64 (Chocolatey not needed) like this (PSH 5 required):
1) Open a command line on the target (remoting for Nano) and run:
2) Install-Packagerovider NuGet -forcebootstrap -force
3) Register-PackageSource -name chocolatey -provider nuget -location http://chocolatey.org/api/v2/ -trusted
4) Install-Package openssh -provider NuGet
5) cd "$((dir "$env:ProgramFiles\nuget\packages\OpenSSH*\tools" |select -last 1).fullname)"
6) .".\barebonesinstaller.ps1" -SSHServerFeature
- FIX: to prevent repeatedly adding "ssh-lsa" when already present (on forced installs, etc.)
- FIX: to uninstall to prevent leaving lsa-ssh authentication provider entries on system
- NEW: ource files are now internal (makes for easier curation and easier for above barebonesinstaller.ps1)
- FIX: crashing uninstall script
- FIX: properly add SSH folder to path on Nano

2016.05.30.20160827 (package ID: Win32-OpenSSH)
- Switch "/KeyBasedAuthenticationFeature" is retired - key based authentication always configured when using "/SSHServerFeature"
- With switch /UseNTRights Package uses ntrights.exe on 32-bit windows and on 64-bit windows - ONLY IF THE 32-bit SUBSYSTEM IS INSTALLED - otherwise it attempts to use Posh Code to grant SeAssignPrimaryTokenPrivilege.
Code used for setting rights WITHOUT /UseNTRights was tested as working on Nano, which means it should work on server core without WOW64.

Package explicity sets log level to QUIET because on some systems the current version of sshd repeatedly logs the same line at a rate of about 1 GB / 2 hours with default log settings.
Package incorporates securing of the server keys using the SSH agent as per the product release notes below.

Dependencies

This package has no dependencies.

Discussion for the Win32 OpenSSH (Microsoft Port) Package

Ground Rules:

This discussion is only about Win32 OpenSSH (Microsoft Port) and the Win32 OpenSSH (Microsoft Port) package. If you have feedback for Chocolatey, please contact the Google Group.
This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
Tell us what you love about the package or Win32 OpenSSH (Microsoft Port), or tell us what needs improvement.
Share your experiences with the package, or extra configuration or gotchas that you've found.
If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.

Resources

Events

Courses

6,459,459

762

07 Mar 2017

Win32 OpenSSH (Microsoft Port)

Win32 OpenSSH (Microsoft Port) 0.0.9.20170306

Some Checks Have Failed or Are Not Yet Complete

Deployment Method: Individual Install, Upgrade, & Uninstall

Deployment Method:

1. Enter Your Internal Repository Url

2. Setup Your Environment

1. Ensure you are set for organizational deployment

2. Get the package into your environment

3. Copy Your Script

4. If applicable - Chocolatey configuration/installation

Ground Rules: